grub/boot/i386/pc/boot.S

499 lines
9.9 KiB
ArmAsm
Raw Normal View History

2002-12-27 08:53:07 +00:00
/* -*-Asm-*- */
/*
* GRUB -- GRand Unified Bootloader
* Copyright (C) 1999,2000,2001,2002,2005 Free Software Foundation, Inc.
2002-12-27 08:53:07 +00:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <grub/boot.h>
#include <grub/machine/boot.h>
2002-12-27 08:53:07 +00:00
/*
* defines for the code go here
*/
/* Absolute addresses
This makes the assembler generate the address without support
from the linker. (ELF can't relocate 16-bit addresses!) */
#define ABS(x) (x-_start+0x7c00)
/* Print message string */
#define MSG(x) movw $ABS(x), %si; call message
/* XXX: binutils-2.9.1.0.x doesn't produce a short opcode for this. */
#define MOV_MEM_TO_AL(x) .byte 0xa0; .word x
.file "boot.S"
.text
/* Tell GAS to generate 16-bit instructions so that this code works
in real mode. */
.code16
.globl _start; _start:
/*
* _start is loaded at 0x7c00 and is jumped to with CS:IP 0:0x7c00
*/
/*
* Beginning of the sector is compatible with the FAT/HPFS BIOS
* parameter block.
*/
jmp after_BPB
nop /* do I care about this ??? */
/*
* This space is for the BIOS parameter block!!!! Don't change
* the first jump, nor start the code anywhere but right after
* this area.
*/
. = _start + 4
/* scratch space */
mode:
.byte 0
disk_address_packet:
sectors:
.long 0
heads:
.long 0
cylinders:
.word 0
sector_start:
.byte 0
head_start:
.byte 0
cylinder_start:
.word 0
/* more space... */
. = _start + GRUB_BOOT_MACHINE_BPB_END
2002-12-27 08:53:07 +00:00
/*
* End of BIOS parameter block.
*/
boot_version:
.byte GRUB_BOOT_VERSION_MAJOR, GRUB_BOOT_VERSION_MINOR
2002-12-27 08:53:07 +00:00
boot_drive:
.byte 0xff /* the disk to load kernel from */
/* 0xff means use the boot drive */
force_lba:
.byte 0
kernel_address:
.word GRUB_BOOT_MACHINE_KERNEL_ADDR
2002-12-27 08:53:07 +00:00
kernel_sector:
.long 1
kernel_segment:
.word GRUB_BOOT_MACHINE_KERNEL_SEG
2002-12-27 08:53:07 +00:00
after_BPB:
/* general setup */
cli /* we're not safe here! */
/*
* This is a workaround for buggy BIOSes which don't pass boot
* drive correctly. If GRUB is installed into a HDD, check if
* DL is masked correctly. If not, assume that the BIOS passed
* a bogus value and set DL to 0x80, since this is the only
* possible boot drive. If GRUB is installed into a floppy,
* this does nothing (only jump).
*/
boot_drive_check:
jmp 1f
testb $0x80, %dl
jnz 1f
movb $0x80, %dl
1:
2002-12-27 08:53:07 +00:00
/*
* ljmp to the next instruction because some bogus BIOSes
* jump to 07C0:0000 instead of 0000:7C00.
*/
ljmp $0, $ABS(real_start)
real_start:
/* set up %ds and %ss as offset from 0 */
xorw %ax, %ax
movw %ax, %ds
movw %ax, %ss
/* set up the REAL stack */
movw $GRUB_BOOT_MACHINE_STACK_SEG, %sp
2002-12-27 08:53:07 +00:00
sti /* we're safe again */
/*
* Check if we have a forced disk reference here
*/
MOV_MEM_TO_AL(ABS(boot_drive)) /* movb ABS(boot_drive), %al */
cmpb $0xff, %al
je 1f
movb %al, %dl
1:
/* save drive reference first thing! */
pushw %dx
/* print a notification message on the screen */
MSG(notification_string)
/* do not probe LBA if the drive is a floppy */
testb $GRUB_BOOT_MACHINE_BIOS_HD_FLAG, %dl
2002-12-27 08:53:07 +00:00
jz chs_mode
/* check if LBA is supported */
movb $0x41, %ah
movw $0x55aa, %bx
int $0x13
/*
* %dl may have been clobbered by INT 13, AH=41H.
* This happens, for example, with AST BIOS 1.04.
*/
popw %dx
pushw %dx
/* use CHS if fails */
jc chs_mode
cmpw $0xaa55, %bx
jne chs_mode
/* check if AH=0x42 is supported if FORCE_LBA is zero */
MOV_MEM_TO_AL(ABS(force_lba)) /* movb ABS(force_lba), %al */
testb %al, %al
jnz lba_mode
andw $1, %cx
jz chs_mode
lba_mode:
/* set %si to the disk address packet */
movw $ABS(disk_address_packet), %si
/* set the mode to non-zero */
movb $1, -1(%si)
movl ABS(kernel_sector), %ebx
/* the size and the reserved byte */
movw $0x0010, (%si)
/* the blocks */
movw $1, 2(%si)
/* the absolute address (low 32 bits) */
movl %ebx, 8(%si)
/* the segment of buffer address */
movw $GRUB_BOOT_MACHINE_BUFFER_SEG, 6(%si)
2002-12-27 08:53:07 +00:00
xorl %eax, %eax
movw %ax, 4(%si)
movl %eax, 12(%si)
/*
* BIOS call "INT 0x13 Function 0x42" to read sectors from disk into memory
* Call with %ah = 0x42
* %dl = drive number
* %ds:%si = segment:offset of disk address packet
* Return:
* %al = 0x0 on success; err code on failure
*/
movb $0x42, %ah
int $0x13
/* LBA read is not supported, so fallback to CHS. */
jc chs_mode
movw $GRUB_BOOT_MACHINE_BUFFER_SEG, %bx
2002-12-27 08:53:07 +00:00
jmp copy_buffer
chs_mode:
/*
* Determine the hard disk geometry from the BIOS!
* We do this first, so that LS-120 IDE floppies work correctly.
*/
movb $8, %ah
int $0x13
jnc final_init
/*
* The call failed, so maybe use the floppy probe instead.
*/
testb $GRUB_BOOT_MACHINE_BIOS_HD_FLAG, %dl
2002-12-27 08:53:07 +00:00
jz floppy_probe
/* Nope, we definitely have a hard disk, and we're screwed. */
jmp hd_probe_error
final_init:
movw $ABS(sectors), %si
/* set the mode to zero */
movb $0, -1(%si)
/* save number of heads */
xorl %eax, %eax
movb %dh, %al
incw %ax
movl %eax, 4(%si)
xorw %dx, %dx
movb %cl, %dl
shlw $2, %dx
movb %ch, %al
movb %dh, %ah
/* save number of cylinders */
incw %ax
movw %ax, 8(%si)
xorw %ax, %ax
movb %dl, %al
shrb $2, %al
/* save number of sectors */
movl %eax, (%si)
setup_sectors:
/* load logical sector start (bottom half) */
movl ABS(kernel_sector), %eax
/* zero %edx */
xorl %edx, %edx
/* divide by number of sectors */
divl (%si)
/* save sector start */
movb %dl, 10(%si)
xorl %edx, %edx /* zero %edx */
divl 4(%si) /* divide by number of heads */
/* save head start */
movb %dl, 11(%si)
/* save cylinder start */
movw %ax, 12(%si)
/* do we need too many cylinders? */
cmpw 8(%si), %ax
jge geometry_error
/*
* This is the loop for taking care of BIOS geometry translation (ugh!)
*/
/* get high bits of cylinder */
movb 13(%si), %dl
shlb $6, %dl /* shift left by 6 bits */
movb 10(%si), %cl /* get sector */
incb %cl /* normalize sector (sectors go
from 1-N, not 0-(N-1) ) */
orb %dl, %cl /* composite together */
movb 12(%si), %ch /* sector+hcyl in cl, cylinder in ch */
/* restore %dx */
popw %dx
/* head number */
movb 11(%si), %dh
/*
* BIOS call "INT 0x13 Function 0x2" to read sectors from disk into memory
* Call with %ah = 0x2
* %al = number of sectors
* %ch = cylinder
* %cl = sector (bits 6-7 are high bits of "cylinder")
* %dh = head
* %dl = drive (0x80 for hard disk, 0x0 for floppy disk)
* %es:%bx = segment:offset of buffer
* Return:
* %al = 0x0 on success; err code on failure
*/
movw $GRUB_BOOT_MACHINE_BUFFER_SEG, %bx
2002-12-27 08:53:07 +00:00
movw %bx, %es /* load %es segment with disk buffer */
xorw %bx, %bx /* %bx = 0, put it at 0 in the segment */
movw $0x0201, %ax /* function 2 */
int $0x13
jc read_error
movw %es, %bx
copy_buffer:
movw ABS(kernel_segment), %es
/*
* We need to save %cx and %si because the startup code in
* kernel uses them without initializing them.
*/
pusha
pushw %ds
movw $0x100, %cx
movw %bx, %ds
xorw %si, %si
xorw %di, %di
cld
rep
movsw
popw %ds
popa
/* boot kernel */
jmp *(kernel_address)
/* END OF MAIN LOOP */
/*
* BIOS Geometry translation error (past the end of the disk geometry!).
*/
geometry_error:
MSG(geometry_error_string)
jmp general_error
/*
* Disk probe failure.
*/
hd_probe_error:
MSG(hd_probe_error_string)
jmp general_error
/*
* Read error on the disk.
*/
read_error:
MSG(read_error_string)
general_error:
MSG(general_error_string)
/* go here when you need to stop the machine hard after an error condition */
stop: jmp stop
notification_string: .string "GRUB "
2002-12-27 08:53:07 +00:00
geometry_error_string: .string "Geom"
hd_probe_error_string: .string "Hard Disk"
read_error_string: .string "Read"
general_error_string: .string " Error"
/*
* message: write the string pointed to by %si
*
* WARNING: trashes %si, %ax, and %bx
*/
/*
* Use BIOS "int 10H Function 0Eh" to write character in teletype mode
* %ah = 0xe %al = character
* %bh = page %bl = foreground color (graphics modes)
*/
1:
movw $0x0001, %bx
movb $0xe, %ah
int $0x10 /* display a byte */
message:
lodsb
cmpb $0, %al
jne 1b /* if not end of string, jmp to display */
ret
/*
* Windows NT breaks compatibility by embedding a magic
* number here.
*/
. = _start + GRUB_BOOT_MACHINE_WINDOWS_NT_MAGIC
2002-12-27 08:53:07 +00:00
nt_magic:
.long 0
.word 0
/*
* This is where an MBR would go if on a hard disk. The code
* here isn't even referenced unless we're on a floppy. Kinda
* sneaky, huh?
*/
part_start:
. = _start + GRUB_BOOT_MACHINE_PART_START
2002-12-27 08:53:07 +00:00
probe_values:
.byte 36, 18, 15, 9, 0
floppy_probe:
/*
* Perform floppy probe.
*/
movw $ABS(probe_values-1), %si
probe_loop:
/* reset floppy controller INT 13h AH=0 */
xorw %ax, %ax
int $0x13
incw %si
movb (%si), %cl
/* if number of sectors is 0, display error and die */
cmpb $0, %cl
jne 1f
/*
* Floppy disk probe failure.
*/
MSG(fd_probe_error_string)
jmp general_error
fd_probe_error_string: .string "Floppy"
1:
/* perform read */
movw $GRUB_BOOT_MACHINE_BUFFER_SEG, %bx
2002-12-27 08:53:07 +00:00
movw $0x201, %ax
movb $0, %ch
movb $0, %dh
int $0x13
/* if error, jump to "probe_loop" */
jc probe_loop
/* %cl is already the correct value! */
movb $1, %dh
movb $79, %ch
jmp final_init
. = _start + GRUB_BOOT_MACHINE_PART_END
2002-12-27 08:53:07 +00:00
/* the last 2 bytes in the sector 0 contain the signature */
.word GRUB_BOOT_MACHINE_SIGNATURE