Use interrupt endpoint for hubs

This commit is contained in:
Vladimir 'phcoder' Serbinenko 2010-08-30 01:04:07 +02:00
parent a98f88ecfe
commit 69d6fc5603

View file

@ -28,6 +28,8 @@
/* USB Supports 127 devices, with device 0 as special case. */
static struct grub_usb_device *grub_usb_devs[GRUB_USBHUB_MAX_DEVICES];
static int rescan = 0;
struct grub_usb_hub
{
struct grub_usb_hub *next;
@ -110,9 +112,6 @@ grub_usb_add_hub (grub_usb_device_t dev)
struct grub_usb_usb_hubdesc hubdesc;
grub_err_t err;
int i;
grub_uint64_t timeout;
grub_usb_device_t next_dev;
grub_usb_device_t *attached_devices;
err = grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_IN
| GRUB_USB_REQTYPE_CLASS
@ -131,11 +130,9 @@ grub_usb_add_hub (grub_usb_device_t dev)
grub_dprintf ("usb", "Hub set configuration\n");
grub_usb_set_configuration (dev, 1);
attached_devices = grub_zalloc (hubdesc.portcnt
* sizeof (attached_devices[0]));
if (!attached_devices)
dev->children = grub_zalloc (hubdesc.portcnt * sizeof (dev->children[0]));
if (!dev->children)
return GRUB_USB_ERR_INTERNAL;
dev->children = attached_devices;
dev->nports = hubdesc.portcnt;
/* Power on all Hub ports. */
@ -143,115 +140,15 @@ grub_usb_add_hub (grub_usb_device_t dev)
{
grub_dprintf ("usb", "Power on - port %d\n", i);
/* Power on the port and wait for possible device connect */
err = grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT
grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT
| GRUB_USB_REQTYPE_CLASS
| GRUB_USB_REQTYPE_TARGET_OTHER),
GRUB_USB_REQ_SET_FEATURE,
GRUB_USB_HUB_FEATURE_PORT_POWER,
i, 0, NULL);
/* Just ignore the device if some error happened */
if (err)
continue;
}
/* Wait for port power-on */
if (hubdesc.pwdgood >= 50)
grub_millisleep (hubdesc.pwdgood * 2);
else
grub_millisleep (100);
/* Iterate over the Hub ports. */
for (i = 1; i <= hubdesc.portcnt; i++)
{
grub_uint32_t status;
/* Get the port status. */
err = grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_IN
| GRUB_USB_REQTYPE_CLASS
| GRUB_USB_REQTYPE_TARGET_OTHER),
GRUB_USB_REQ_GET_STATUS,
0, i, sizeof (status), (char *) &status);
/* Just ignore the device if the Hub does not report the
status. */
if (err)
continue;
grub_dprintf ("usb", "Hub port %d status: 0x%02x\n", i, status);
/* If connected, reset and enable the port. */
if (status & GRUB_USB_HUB_STATUS_PORT_CONNECTED)
{
grub_usb_speed_t speed;
/* Determine the device speed. */
if (status & GRUB_USB_HUB_STATUS_PORT_LOWSPEED)
speed = GRUB_USB_SPEED_LOW;
else
{
if (status & GRUB_USB_HUB_STATUS_PORT_HIGHSPEED)
speed = GRUB_USB_SPEED_HIGH;
else
speed = GRUB_USB_SPEED_FULL;
}
/* A device is actually connected to this port.
* Now do reset of port. */
grub_dprintf ("usb", "Reset hub port - port %d\n", i);
err = grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT
| GRUB_USB_REQTYPE_CLASS
| GRUB_USB_REQTYPE_TARGET_OTHER),
GRUB_USB_REQ_SET_FEATURE,
GRUB_USB_HUB_FEATURE_PORT_RESET,
i, 0, 0);
/* If the Hub does not cooperate for this port, just skip
the port. */
if (err)
continue;
/* Wait for reset procedure done */
timeout = grub_get_time_ms () + 1000;
do
{
/* Get the port status. */
err = grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_IN
| GRUB_USB_REQTYPE_CLASS
| GRUB_USB_REQTYPE_TARGET_OTHER),
GRUB_USB_REQ_GET_STATUS,
0, i, sizeof (status), (char *) &status);
}
while (!err &&
!(status & GRUB_USB_HUB_STATUS_C_PORT_RESET) &&
(grub_get_time_ms() < timeout) );
if (err || !(status & GRUB_USB_HUB_STATUS_C_PORT_RESET) )
continue;
/* Wait a recovery time after reset, spec. says 10ms */
grub_millisleep (10);
/* Do reset of connection change bit */
err = grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT
| GRUB_USB_REQTYPE_CLASS
| GRUB_USB_REQTYPE_TARGET_OTHER),
GRUB_USB_REQ_CLEAR_FEATURE,
GRUB_USB_HUB_FEATURE_C_PORT_CONNECTED,
i, 0, 0);
/* Just ignore the device if the Hub reports some error */
if (err)
continue;
grub_dprintf ("usb", "Hub port - cleared connection change\n");
/* Add the device and assign a device address to it. */
grub_dprintf ("usb", "Call hub_add_dev - port %d\n", i);
next_dev = grub_usb_hub_add_dev (&dev->controller, speed);
if (! next_dev)
continue;
attached_devices[i - 1] = next_dev;
/* If the device is a Hub, scan it for more devices. */
if (next_dev->descdev.class == 0x09)
grub_usb_add_hub (next_dev);
}
}
/* Rest will be done on next usb poll. */
for (i = 0; i < dev->config[0].interf[0].descif->endpointcnt;
i++)
{
@ -271,6 +168,8 @@ grub_usb_add_hub (grub_usb_device_t dev)
}
}
rescan = 1;
return GRUB_ERR_NONE;
}
@ -383,9 +282,6 @@ poll_nonroot_hub (grub_usb_device_t dev)
{
grub_err_t err;
unsigned i;
grub_uint64_t timeout;
grub_usb_device_t next_dev;
grub_usb_device_t *attached_devices = dev->children;
grub_uint8_t changed;
grub_size_t actual;
@ -408,9 +304,6 @@ poll_nonroot_hub (grub_usb_device_t dev)
if (err || actual == 0 || changed == 0)
return;
grub_dprintf ("usb", "statuschanged = %02x, err = %d, actual = %d\n",
changed, err, actual);
/* Iterate over the Hub ports. */
for (i = 1; i <= dev->nports; i++)
{
@ -426,17 +319,12 @@ poll_nonroot_hub (grub_usb_device_t dev)
GRUB_USB_REQ_GET_STATUS,
0, i, sizeof (status), (char *) &status);
grub_printf ("i = %d, status = %08x\n", i, status);
if (err)
continue;
/* FIXME: properly handle these conditions. */
if (status & GRUB_USB_HUB_STATUS_C_PORT_RESET)
grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT
| GRUB_USB_REQTYPE_CLASS
| GRUB_USB_REQTYPE_TARGET_OTHER),
GRUB_USB_REQ_CLEAR_FEATURE,
GRUB_USB_HUB_FEATURE_C_PORT_RESET, i, 0, 0);
if (status & GRUB_USB_HUB_STATUS_C_PORT_ENABLED)
grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT
| GRUB_USB_REQTYPE_CLASS
@ -458,26 +346,44 @@ poll_nonroot_hub (grub_usb_device_t dev)
GRUB_USB_REQ_CLEAR_FEATURE,
GRUB_USB_HUB_FEATURE_C_PORT_OVERCURRENT, i, 0, 0);
if (!(status & GRUB_USB_HUB_STATUS_C_PORT_CONNECTED))
continue;
if (status & GRUB_USB_HUB_STATUS_C_PORT_CONNECTED)
{
grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT
| GRUB_USB_REQTYPE_CLASS
| GRUB_USB_REQTYPE_TARGET_OTHER),
GRUB_USB_REQ_CLEAR_FEATURE,
GRUB_USB_HUB_FEATURE_C_PORT_CONNECTED, i, 0, 0);
if (status & GRUB_USB_HUB_STATUS_C_PORT_CONNECTED)
{
detach_device (attached_devices[i-1]);
attached_devices[i - 1] = NULL;
}
detach_device (dev->children[i - 1]);
dev->children[i - 1] = NULL;
/* Connected and status of connection changed ? */
if ((status & GRUB_USB_HUB_STATUS_PORT_CONNECTED)
&& (status & GRUB_USB_HUB_STATUS_C_PORT_CONNECTED))
if (status & GRUB_USB_HUB_STATUS_PORT_CONNECTED)
{
/* A device is actually connected to this port.
* Now do reset of port. */
grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT
| GRUB_USB_REQTYPE_CLASS
| GRUB_USB_REQTYPE_TARGET_OTHER),
GRUB_USB_REQ_SET_FEATURE,
GRUB_USB_HUB_FEATURE_PORT_RESET,
i, 0, 0);
rescan = 1;
}
}
if (status & GRUB_USB_HUB_STATUS_C_PORT_RESET)
{
grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT
| GRUB_USB_REQTYPE_CLASS
| GRUB_USB_REQTYPE_TARGET_OTHER),
GRUB_USB_REQ_CLEAR_FEATURE,
GRUB_USB_HUB_FEATURE_C_PORT_RESET, i, 0, 0);
if (status & GRUB_USB_HUB_STATUS_PORT_CONNECTED)
{
grub_usb_speed_t speed;
grub_usb_device_t next_dev;
/* Determine the device speed. */
if (status & GRUB_USB_HUB_STATUS_PORT_LOWSPEED)
@ -490,64 +396,22 @@ poll_nonroot_hub (grub_usb_device_t dev)
speed = GRUB_USB_SPEED_FULL;
}
/* A device is actually connected to this port.
* Now do reset of port. */
err = grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT
| GRUB_USB_REQTYPE_CLASS
| GRUB_USB_REQTYPE_TARGET_OTHER),
GRUB_USB_REQ_SET_FEATURE,
GRUB_USB_HUB_FEATURE_PORT_RESET,
i, 0, 0);
/* If the Hub does not cooperate for this port, just skip
the port. */
if (err)
continue;
/* Wait for reset procedure done */
timeout = grub_get_time_ms () + 1000;
do
{
/* Get the port status. */
err = grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_IN
| GRUB_USB_REQTYPE_CLASS
| GRUB_USB_REQTYPE_TARGET_OTHER),
GRUB_USB_REQ_GET_STATUS,
0, i, sizeof (status), (char *) &status);
}
while (!err &&
!(status & GRUB_USB_HUB_STATUS_C_PORT_RESET) &&
(grub_get_time_ms() < timeout) );
if (err || !(status & GRUB_USB_HUB_STATUS_C_PORT_RESET) )
continue;
/* Wait a recovery time after reset, spec. says 10ms */
grub_millisleep (10);
/* Do reset of connection change bit */
err = grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT
| GRUB_USB_REQTYPE_CLASS
| GRUB_USB_REQTYPE_TARGET_OTHER),
GRUB_USB_REQ_CLEAR_FEATURE,
GRUB_USB_HUB_FEATURE_C_PORT_CONNECTED,
i, 0, 0);
/* Just ignore the device if the Hub reports some error */
if (err)
continue;
/* Add the device and assign a device address to it. */
next_dev = grub_usb_hub_add_dev (&dev->controller, speed);
if (! next_dev)
continue;
attached_devices[i - 1] = next_dev;
dev->children[i - 1] = next_dev;
/* If the device is a Hub, scan it for more devices. */
if (next_dev->descdev.class == 0x09)
grub_usb_add_hub (next_dev);
}
}
return;
}
}
void
@ -578,6 +442,10 @@ grub_usb_poll_devices (void)
}
}
while (1)
{
rescan = 0;
/* We should check changes of non-root hubs too. */
for (i = 0; i < GRUB_USBHUB_MAX_DEVICES; i++)
{
@ -586,6 +454,10 @@ grub_usb_poll_devices (void)
if (dev && dev->descdev.class == 0x09)
poll_nonroot_hub (dev);
}
if (!rescan)
break;
grub_millisleep (50);
}
}