vbatts
/
grub
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

merge mainline into sgi

This commit is contained in:
Vladimir 'phcoder' Serbinenko 2011-05-15 02:23:36 +02:00
parent 96a29d188b 5d063cdc10
commit bee1aeb9a1
49 changed files with 1148 additions and 348 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

165
ChangeLog
View File

@ -1,3 +1,168 @@
2011-05-15 Vladimir Serbinenko <phcoder@gmail.com>
Fuloong support.
* configure.ac: Rename yeeloong platform to loongson. All users updated.
* grub-core/Makefile.core.def (fwstart_fuloong): New image.
* grub-core/boot/mips/loongson/fuloong.S: New file.
* grub-core/boot/mips/loongson/fwstart.S: Wait for CS5536 to come up.
Explicitly init CS5536.
[FULOONG]: Don't use serial until CS5536 is available.
Set GPIO based on dumps.
(serial_hw_init) [FULOONG]: Handle CS5536 parts.
[FULOONG]: Handle GPIO and memory controller differences.
Parse machine type in $a2.
* grub-core/boot/mips/startup_raw.S: Determine and save the
architecture.
* grub-core/bus/cs5536.c (gpiodump): Move to fwstart.S.
(grub_cs5536_init_geode): Remove gpio part. Conditionalise DIVIL
init on architecture type.
* grub-core/kern/mips/loongson/init.c (grub_machine_init): Init
SIS315E. Don't init at_keyboard on fuloong.
(grub_halt): Support Fuloong.
* grub-core/kern/mips/startup.S [LOONGSON]: Save $s7.
* grub-core/loader/mips/linux.c (LOONGSON_MACHTYPE): Removed.
(loongson_machtypes): New array.
(grub_cmd_linux) [GRUB_MACHINE_MIPS_LOONGSON]: Pass the right machine
type.
* grub-core/term/ns8250.c (serial_get_divisor): New parameter port and
config. All users updated. Handle CS5536 serial.
* grub-core/term/serial.c (grub_serial_register): Conditionalise
default port on machine type. Register serial as inactive.
* grub-core/video/sis315pro.c: New file.
* include/grub/cs5536.h (GRUB_CS5536_MSR_MAILBOX_CONFIG_ENABLED): New
definition.
(GRUB_CS5536_MSR_MAILBOX_CONFIG): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART1_COM1): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART2_COM3): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART1_CONF): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART2_CONF): Likewise.
* include/grub/mips/loongson.h (GRUB_CPU_LOONGSON_SHUTDOWN_GPIO): Rename
to ...
(GRUB_CPU_YEELOONG_SHUTDOWN_GPIO): ... this.
* include/grub/mips/loongson/kernel.h (GRUB_ARCH_MACHINE_YEELOONG): New
definition.
(GRUB_ARCH_MACHINE_FULOONG): Likewise.
(grub_arch_machine): New extern var.
* include/grub/mips/loongson/serial.h
(GRUB_MACHINE_SERIAL_DIVISOR_115200): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0_DIVISOR_115200): ... this.
(GRUB_MACHINE_SERIAL_PORT): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0): ... this.
(GRUB_MACHINE_SERIAL_PORT2_DIVISOR_115200): New definition.
(GRUB_MACHINE_SERIAL_PORT1): Likewise.
(GRUB_MACHINE_SERIAL_PORT2): Likewise.
(GRUB_MACHINE_SERIAL_PORTS): Include ports 1 and 2.
* include/grub/term.h (grub_term_register_input_inactive): New inline
function.
(grub_term_register_output_inactive): Likewise.
* include/grub/video.h (grub_video_driver_id): New value
GRUB_VIDEO_DRIVER_SIS315PRO.
* util/grub-mkimage.c (image_target_desc): Rename name to dirname.
New field "names". All users updated.
New field value IMAGE_FULOONG_FLASH.
(generate_image): USe separate fwstart hashes for yeeloong and fuloong.
2011-05-14 Jordan Uggla <jordan.uggla@gmail.com>
* docs/grub.texi (Invoking grub-install): Fix additional outdated claims
and add some clarification.
2011-05-14 Vladimir Serbinenko <phcoder@gmail.com>
* util/grub.d/10_linux.in: Autoload gzio since it's needed on some
platforms if kernel is compressed.
2011-05-14 Vladimir Serbinenko <phcoder@gmail.com>
* grub-core/kern/mm.c (grub_memalign): Disable auto-unloadding of
unused modules since currently referrence counter isn't reliable and
there isn't much memory to recover there anyway.
2011-05-14 Vladimir Serbinenko <phcoder@gmail.com>
* grub-core/kern/dl.c (grub_dl_load_file): Decrease ref counter
rather than resetting it to allow modules to reference themselves
in init.
2011-05-14 Vladimir Serbinenko <phcoder@gmail.com>
* grub-core/kern/dl.c (grub_dl_unload): Don't decrease reference
counter on dependencies since grub_dl_unref already handles this.
2011-05-14 Vladimir Serbinenko <phcoder@gmail.com>
* grub-core/font/font_cmd.c (loadfont_command): Set grub_errno
on error if not already done.
2011-05-14 Vladimir Serbinenko <phcoder@gmail.com>
Fix few potential memory misusage.
* grub-core/font/font.c (load_font_index): Don't free char_index to
avoid double free.
(grub_font_load): Zero-fill font at alloc for safety.
Close file on error.
(free_font): Free bmp_idx.
2011-05-14 Vladimir Serbinenko <phcoder@gmail.com>
* docs/grub.texi (Installation): Fix several outdated claims.
2011-05-14 Vladimir Serbinenko <phcoder@gmail.com>
Handle module_license on windows.
* util/grub-pe2elf.c (MODLICENSE_SECTION): New definition. All following
sections shifted.
(insert_string): Make argument const char * instead of char *.
(write_section_data): Handle long section names.
Handle module_license.
2011-05-14 Vladimir Serbinenko <phcoder@gmail.com>
* grub-core/commands/menuentry.c (grub_cmd_menuentry): Correctly
handle class-free menuentries.
(grub_normal_add_menu_entry): Add a check to be sure.
2011-05-14 Vladimir Serbinenko <phcoder@gmail.com>
* grub-core/term/at_keyboard.c (set1_e0_mapping): Fix swap between
PgUp and PgDown.
2011-05-13 Vladimir Serbinenko <phcoder@gmail.com>
* configure.ac: Bump version to 1.99.
2011-05-13 Vladimir Serbinenko <phcoder@gmail.com>
Give ATA device a bit more time on first try in order to allow disks
to spin up.
* grub-core/disk/ata.c (grub_atapi_identify): Use GRUB_ATA_TOUT_DEV_INIT
if dev->present is 1. Reset dev->present on failure.
(grub_ata_device_initialize): Set dev->present to 1.
* include/grub/ata.h (GRUB_ATA_TOUT_DEV_INIT): New value.
(grub_ata_device): New member 'present'.
2011-05-13 Vladimir Serbinenko <phcoder@gmail.com>
* util/grub-mkimage.c (generate_image): Update hash.
2011-05-13 Vladimir Serbinenko <phcoder@gmail.com>
Flush caches on DMA memory.
* grub-core/kern/mips/cache.S (grub_arch_sync_dma_caches): New function.
* grub-core/bus/pci.c (grub_memalign_dma32): Flush caches.
(grub_dma_free): Likewise.
* include/grub/cache.h (grub_arch_sync_dma_caches): New declaration.
2011-05-13 Vladimir Serbinenko <phcoder@gmail.com>
* grub-core/boot/mips/yeeloong/fwstart.S: Add explicit set mips3
to avoid asm treating ld and sd as macros.
2011-05-13 Vladimir Serbinenko <phcoder@gmail.com>
* grub-core/boot/mips/startup_raw.S: Flush cache after loading

2
conf/Makefile.common
View File

@ -25,7 +25,7 @@ endif
if COND_i386_ieee1275
CFLAGS_PLATFORM += -mrtd -mregparm=3
endif
if COND_mips_yeeloong
if COND_mips_loongson
CFLAGS_PLATFORM += -mexplicit-relocs
CPPFLAGS_PLATFORM = -DUSE_ASCII_FAILBACK
endif

18
configure.ac
View File

@ -32,7 +32,7 @@ dnl type, so there is no conflict. Variables with the prefix "TARGET_"
dnl (such as TARGET_CC, TARGET_CFLAGS, etc.) are used for the target
dnl type.
AC_INIT([GRUB],[1.99~rc2],[bug-grub@gnu.org])
AC_INIT([GRUB],[1.99],[bug-grub@gnu.org])
AC_CONFIG_AUX_DIR([build-aux])
@ -96,7 +96,7 @@ if test "x$with_platform" = x; then
powerpc-*) platform=ieee1275 ;;
powerpc64-*) platform=ieee1275 ;;
sparc64-*) platform=ieee1275 ;;
mips-*) platform=yeeloong ;;
mips-*) platform=loongson ;;
*) AC_MSG_ERROR([unsupported CPU: "$target_cpu"]) ;;
esac
else
@ -123,7 +123,9 @@ case "$target_cpu"-"$platform" in
powerpc-ieee1275) ;;
sparc64-ieee1275) ;;
mips-qemu-mips) ;;
mips-yeeloong) ;;
mips-yeeloong) platform=loongson ;;
mips-fuloong) platform=loongson ;;
mips-loongson) ;;
mips-arc) ;;
*-emu) ;;
*) AC_MSG_ERROR([platform "$platform" is not supported for target CPU "$target_cpu"]) ;;
@ -157,7 +159,7 @@ case "$platform" in
qemu) machine_CPPFLAGS="$machine_CPPFLAGS -DGRUB_MACHINE_QEMU=1" ;;
pc) machine_CPPFLAGS="$machine_CPPFLAGS -DGRUB_MACHINE_PCBIOS=1" ;;
emu) machine_CPPFLAGS="$machine_CPPFLAGS -DGRUB_MACHINE_EMU=1" ;;
yeeloong) machine_CPPFLAGS="$machine_CPPFLAGS -DGRUB_MACHINE_MIPS_YEELOONG=1 -DGRUB_MACHINE_MIPS_BONITO=1" ;;
loongson) machine_CPPFLAGS="$machine_CPPFLAGS -DGRUB_MACHINE_MIPS_LOONGSON=1 -DGRUB_MACHINE_MIPS_BONITO=1" ;;
qemu-mips) machine_CPPFLAGS="$machine_CPPFLAGS -DGRUB_MACHINE_MIPS_QEMU_MIPS=1 -DGRUB_MACHINE_MIPS_BONITO=1" ;;
mips-arc) machine_CPPFLAGS="$machine_CPPFLAGS -DGRUB_MACHINE_MIPS_ARC=1 -DGRUB_MACHINE_ARC=1" ;;
esac
@ -221,8 +223,8 @@ for ext in pcf pcf.gz bdf bdf.gz ttf ttf.gz; do
done
done
if test "x$FONT_SOURCE" = x && ( test "x$platform" = xqemu || test "x$platform" = xyeeloong ); then
AC_MSG_ERROR([qemu and yeeloong ports need unifont])
if test "x$FONT_SOURCE" = x && ( test "x$platform" = xqemu || test "x$platform" = xloongson ); then
AC_MSG_ERROR([qemu and loongson ports need unifont])
fi
AC_SUBST([FONT_SOURCE])
@ -400,7 +402,7 @@ if test "x$grub_cv_cc_fno_dwarf2_cfi_asm" = xyes; then
TARGET_CFLAGS="$TARGET_CFLAGS -fno-dwarf2-cfi-asm"
fi
if test "${target_cpu}-${platform}" = mips-yeeloong; then
if test "${target_cpu}-${platform}" = mips-loongson; then
AC_CACHE_CHECK([whether -march=loongson2f works], [grub_cv_cc_march_loongson2f], [
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -march=loongson2f"
@ -952,7 +954,7 @@ AM_CONDITIONAL([COND_i386_ieee1275], [test x$target_cpu = xi386 -a x$platform =
AM_CONDITIONAL([COND_i386_coreboot], [test x$target_cpu = xi386 -a x$platform = xcoreboot])
AM_CONDITIONAL([COND_i386_multiboot], [test x$target_cpu = xi386 -a x$platform = xmultiboot])
AM_CONDITIONAL([COND_x86_64_efi], [test x$target_cpu = xx86_64 -a x$platform = xefi])
AM_CONDITIONAL([COND_mips_yeeloong], [test x$target_cpu = xmips -a x$platform = xyeeloong])
AM_CONDITIONAL([COND_mips_loongson], [test x$target_cpu = xmips -a x$platform = xloongson])
AM_CONDITIONAL([COND_mips_qemu_mips], [test x$target_cpu = xmips -a x$platform = xqemu_mips])
AM_CONDITIONAL([COND_mips_arc], [test x$target_cpu = xmips -a x$platform = xarc])
AM_CONDITIONAL([COND_sparc64_ieee1275], [test x$target_cpu = xsparc64 -a x$platform = xieee1275])

89
docs/grub.texi
View File

@ -528,21 +528,15 @@ system (@pxref{Obtaining and Building GRUB}). You can do this either
from the source tarball, or as a package for your OS.
After you have done that, you need to install the boot loader on a
drive (floppy or hard disk). There are two ways of doing that - either
using the utility @command{grub-install} (@pxref{Invoking
grub-install}) on a UNIX-like OS, or by running GRUB itself from a
floppy. These are quite similar, however the utility might probe a
wrong BIOS drive, so you should be careful.
Also, if you install GRUB on a UNIX-like OS, please make sure that you
have an emergency boot disk ready, so that you can rescue your computer
if, by any chance, your hard drive becomes unusable (unbootable).
drive (floppy or hard disk) by using the utility
@command{grub-install} (@pxref{Invoking grub-install}) on a UNIX-like OS.
GRUB comes with boot images, which are normally put in the directory
@file{/usr/lib/grub/i386-pc}. Hereafter, the directory where GRUB images are
initially placed (normally @file{/usr/lib/grub/i386-pc}) will be
@file{/usr/lib/grub/<cpu>-<platform>} (for BIOS-based machines
@file{/usr/lib/grub/i386-pc}). Hereafter, the directory where GRUB images are
initially placed (normally @file{/usr/lib/grub/<cpu>-<platform>}) will be
called the @dfn{image directory}, and the directory where the boot
loader needs to find them (usually @file{/boot/grub}) will be called
loader needs to find them (usually @file{/boot}) will be called
the @dfn{boot directory}.
@menu
@ -556,27 +550,18 @@ the @dfn{boot directory}.
@node Installing GRUB using grub-install
@section Installing GRUB using grub-install
@strong{Caution:} This procedure is definitely less safe, because
there are several ways in which your computer can become
unbootable. For example, most operating systems don't tell GRUB how to
map BIOS drives to OS devices correctly---GRUB merely @dfn{guesses}
the mapping. This will succeed in most cases, but not
always. Therefore, GRUB provides you with a map file called the
@dfn{device map}, which you must fix if it is wrong. @xref{Device
map}, for more details.
For information on where GRUB should be installed on PC BIOS platforms,
@pxref{BIOS installation}.
If you still do want to install GRUB under a UNIX-like OS (such
In order to install GRUB under a UNIX-like OS (such
as @sc{gnu}), invoke the program @command{grub-install} (@pxref{Invoking
grub-install}) as the superuser (@dfn{root}).
The usage is basically very simple. You only need to specify one
argument to the program, namely, where to install the boot loader. The
argument can be either a device file (like @samp{/dev/hda}) or a
partition specified in GRUB's notation. For example, under Linux the
following will install GRUB into the MBR of the first IDE disk:
argument has to be either a device file (like @samp{/dev/hda}).
For example, under Linux the following will install GRUB into the MBR
of the first IDE disk:
@example
# @kbd{grub-install /dev/hda}
@ -588,37 +573,22 @@ Likewise, under GNU/Hurd, this has the same effect:
# @kbd{grub-install /dev/hd0}
@end example
But all the above examples assume that GRUB should use images under
the root directory. If you want GRUB to use images under a directory
other than the root directory, you need to specify the option
@option{--root-directory}. The typical usage is that you create a GRUB
But all the above examples assume that GRUB should put images under
the @file{/boot} directory. If you want GRUB to put images under a directory
other than @file{/boot}, you need to specify the option
@option{--boot-directory}. The typical usage is that you create a GRUB
boot floppy with a filesystem. Here is an example:
@example
@group
# @kbd{mke2fs /dev/fd0}
# @kbd{mount -t ext2 /dev/fd0 /mnt}
# @kbd{grub-install --root-directory=/mnt fd0}
# @kbd{mkdir /mnt/boot}
# @kbd{grub-install --boot-directory=/mnt/boot /dev/fd0}
# @kbd{umount /mnt}
@end group
@end example
Another example is when you have a separate boot partition
which is mounted at @file{/boot}. Since GRUB is a boot loader, it
doesn't know anything about mountpoints at all. Thus, you need to run
@command{grub-install} like this:
@example
# @kbd{grub-install --root-directory=/boot /dev/hda}
@end example
By the way, as noted above, it is quite difficult to guess BIOS drives
correctly under a UNIX-like OS. Thus, @command{grub-install} will prompt
you to check if it could really guess the correct mappings, after the
installation. The format is defined in @ref{Device map}. Please be
quite careful. If the output is wrong, it is unlikely that your
computer will be able to boot with no problem.
Some BIOSes have a bug of exposing the first partition of a USB drive as a
floppy instead of exposing the USB drive as a hard disk (they call it
``USB-FDD'' boot). In such cases, you need to install like this:
@ -4195,15 +4165,28 @@ Print a summary of the command-line options and exit.
@item --version
Print the version number of GRUB and exit.
@item --root-directory=@var{dir}
Install GRUB images under the directory @var{dir} instead of the root
directory. This option is useful when you want to install GRUB into a
separate partition or a removable disk. Here is an example in which
you have a separate @dfn{boot} partition which is mounted on
@file{/boot}:
@item --boot-directory=@var{dir}
Install GRUB images under the directory @file{@var{dir}/grub/}
This option is useful when you want to install GRUB into a
separate partition or a removable disk.
If this option is not specified then it defaults to @file{/boot}, so
@example
@kbd{grub-install --root-directory=/boot hd0}
@kbd{grub-install /dev/sda}
@end example
is equivalent to
@example
@kbd{grub-install --boot-directory=/boot/ /dev/sda}
@end example
Here is an example in which you have a separate @dfn{boot} partition which is
mounted on
@file{/mnt/boot}:
@example
@kbd{grub-install --boot-directory=/mnt/boot /dev/sdb}
@end example
@item --recheck

14
gentpl.py
View File

@ -6,7 +6,7 @@
GRUB_PLATFORMS = [ "emu", "i386_pc", "i386_efi", "i386_qemu", "i386_coreboot",
"i386_multiboot", "i386_ieee1275", "x86_64_efi",
"mips_yeeloong", "sparc64_ieee1275",
"mips_loongson", "sparc64_ieee1275",
"powerpc_ieee1275", "mips_arc" ]
GROUPS = {}
@ -17,7 +17,7 @@ GROUPS["common"] = GRUB_PLATFORMS[:]
GROUPS["i386"] = [ "i386_pc", "i386_efi", "i386_qemu", "i386_coreboot", "i386_multiboot", "i386_ieee1275" ]
GROUPS["x86_64"] = [ "x86_64_efi" ]
GROUPS["x86"] = GROUPS["i386"] + GROUPS["x86_64"]
GROUPS["mips"] = [ "mips_yeeloong", "mips_arc" ]
GROUPS["mips"] = [ "mips_loongson", "mips_arc" ]
GROUPS["sparc64"] = [ "sparc64_ieee1275" ]
GROUPS["powerpc"] = [ "powerpc_ieee1275" ]
@ -29,17 +29,17 @@ GROUPS["ieee1275"] = [ "i386_ieee1275", "sparc64_ieee1275", "powerpc_ieee1275"
GROUPS["noemu"] = GRUB_PLATFORMS[:]; GROUPS["noemu"].remove("emu")
# Groups based on hardware features
GROUPS["cmos"] = GROUPS["x86"][:] + ["mips_yeeloong"]; GROUPS["cmos"].remove("i386_efi"); GROUPS["cmos"].remove("x86_64_efi")
GROUPS["pci"] = GROUPS["x86"] + ["mips_yeeloong"]
GROUPS["cmos"] = GROUPS["x86"][:] + ["mips_loongson"]; GROUPS["cmos"].remove("i386_efi"); GROUPS["cmos"].remove("x86_64_efi")
GROUPS["pci"] = GROUPS["x86"] + ["mips_loongson"]
GROUPS["usb"] = GROUPS["pci"]
# If gfxterm is main output console integrate it into kernel
GROUPS["videoinkernel"] = ["mips_yeeloong"]
GROUPS["videoinkernel"] = ["mips_loongson"]
GROUPS["videomodules"] = GRUB_PLATFORMS[:];
for i in GROUPS["videoinkernel"]: GROUPS["videomodules"].remove(i)
# Similar for terminfo
GROUPS["terminfoinkernel"] = ["mips_yeeloong", "mips_arc"] + GROUPS["ieee1275"];
GROUPS["terminfoinkernel"] = ["mips_loongson", "mips_arc"] + GROUPS["ieee1275"];
GROUPS["terminfomodule"] = GRUB_PLATFORMS[:];
for i in GROUPS["terminfoinkernel"]: GROUPS["terminfomodule"].remove(i)
@ -238,7 +238,7 @@ def foreach_enabled_platform(closure):
# noemu = bus/usb/usbhub.c;
# enable = emu;
# enable = i386;
# enable = mips_yeeloong;
# enable = mips_loongson;
# emu_condition = COND_GRUB_EMU_USB;
# };
#

2
grub-core/Makefile.am
View File

@ -134,7 +134,7 @@ KERNEL_HEADER_FILES += $(top_srcdir)/include/grub/extcmd.h
KERNEL_HEADER_FILES += $(top_srcdir)/include/grub/arc/arc.h
endif
if COND_mips_yeeloong
if COND_mips_loongson
KERNEL_HEADER_FILES += $(top_builddir)/include/grub/keyboard_layouts.h
KERNEL_HEADER_FILES += $(top_builddir)/include/grub/cpu/cache.h
KERNEL_HEADER_FILES += $(top_srcdir)/include/grub/bitmap.h

39
grub-core/Makefile.core.def
View File

@ -32,12 +32,12 @@ kernel = {
i386_coreboot_ldflags = '-Wl,-Ttext=0x8200';
i386_multiboot_ldflags = '-Wl,-Ttext=0x8200';
i386_ieee1275_ldflags = '-Wl,-Ttext=0x10000';
mips_yeeloong_ldflags = '-Wl,-Ttext,0x80200000';
mips_loongson_ldflags = '-Wl,-Ttext,0x80200000';
powerpc_ieee1275_ldflags = '-Wl,-Ttext,0x200000';
sparc64_ieee1275_ldflags = '-Wl,-Ttext,0x4400';
mips_arc_ldflags = '-Wl,-Ttext,0x8a000000';
mips_yeeloong_cppflags = '-DUSE_ASCII_FAILBACK';
mips_loongson_cppflags = '-DUSE_ASCII_FAILBACK';
i386_qemu_cppflags = '-DGRUB_BOOT_MACHINE_LINK_ADDR=$(GRUB_BOOT_MACHINE_LINK_ADDR)';
emu_cflags = '$(CFLAGS_GNULIB)';
emu_cppflags = '$(CPPFLAGS_GNULIB)';
@ -145,16 +145,17 @@ kernel = {
mips_arc = term/arc/console.c;
mips_arc = disk/arc/arcdisk.c;
mips_yeeloong = term/ns8250.c;
mips_yeeloong = bus/bonito.c;
mips_yeeloong = bus/cs5536.c;
mips_yeeloong = bus/pci.c;
mips_yeeloong = kern/mips/yeeloong/init.c;
mips_yeeloong = term/at_keyboard.c;
mips_yeeloong = term/serial.c;
mips_yeeloong = video/sm712.c;
mips_loongson = term/ns8250.c;
mips_loongson = bus/bonito.c;
mips_loongson = bus/cs5536.c;
mips_loongson = bus/pci.c;
mips_loongson = kern/mips/loongson/init.c;
mips_loongson = term/at_keyboard.c;
mips_loongson = term/serial.c;
mips_loongson = video/sm712.c;
mips_loongson = video/sis315pro.c;
extra_dist = video/sm712_init.c;
mips_yeeloong = commands/keylayouts.c;
mips_loongson = commands/keylayouts.c;
powerpc_ieee1275 = kern/ieee1275/init.c;
powerpc_ieee1275 = kern/powerpc/cache.S;
@ -332,10 +333,18 @@ image = {
image = {
name = fwstart;
mips_yeeloong = boot/mips/yeeloong/fwstart.S;
mips_loongson = boot/mips/loongson/fwstart.S;
objcopyflags = '-O binary';
ldflags = '-static-libgcc -lgcc -Wl,-N,-S,-Ttext,0xbfc00000,-Bstatic';
enable = mips_yeeloong;
enable = mips_loongson;
};
image = {
name = fwstart_fuloong;
mips_loongson = boot/mips/loongson/fuloong.S;
objcopyflags = '-O binary';
ldflags = '-static-libgcc -lgcc -Wl,-N,-S,-Ttext,0xbfc00000,-Bstatic';
enable = mips_loongson;
};
module = {
@ -359,8 +368,8 @@ module = {
module = {
name = lsspd;
mips_yeeloong = commands/mips/yeeloong/lsspd.c;
enable = mips_yeeloong;
mips_loongson = commands/mips/loongson/lsspd.c;
enable = mips_loongson;
};
module = {

2
grub-core/boot/mips/loongson/fuloong.S Normal file
View File

@ -0,0 +1,2 @@
#define FULOONG 1
#include "fwstart.S"

156
grub-core/boot/mips/yeeloong/fwstart.S → grub-core/boot/mips/loongson/fwstart.S
View File

@ -16,51 +16,73 @@
* along with GRUB. If not, see <http://www.gnu.org/licenses/>.
*/
#include <grub/mips/yeeloong/serial.h>
#include <grub/mips/yeeloong/pci.h>
#include <grub/mips/loongson/serial.h>
#include <grub/mips/loongson/pci.h>
#include <grub/mips/loongson.h>
#include <grub/pci.h>
#include <grub/machine/serial.h>
#include <grub/machine/kernel.h>
#include <grub/ns8250.h>
#include <grub/cs5536.h>
#include <grub/smbus.h>
#ifdef FULOONG
#define GRUB_MACHINE_SERIAL_PORT GRUB_MACHINE_SERIAL_PORT2
#define GRUB_MACHINE_SERIAL_DIVISOR_115200 GRUB_MACHINE_SERIAL_PORT2_DIVISOR_115200
#else
#define GRUB_MACHINE_SERIAL_PORT GRUB_MACHINE_SERIAL_PORT0
#define GRUB_MACHINE_SERIAL_DIVISOR_115200 GRUB_MACHINE_SERIAL_PORT0_DIVISOR_115200
#endif
.set noreorder
.set noat
.set nomacro
.set mips3
.global start,_start,__start
start:
_start:
__start:
/* Put serial init as soon as possible. But on Fuloong serial is past
Geode, so on Fuloong we need Geode first.
*/
#ifndef FULOONG
bal serial_hw_init
nop
#endif
/* Find CS5536 controller. */
/* $t4 chooses device in priority encoding. */
/* Resulting value is kept in GRUB_MACHINE_PCI_CONF_CTRL_REG.
This way we don't need to sacrifice a register for it. */
retry_cs5536:
/* We have only one bus (0). Function is 0. */
lui $t0, %hi(GRUB_MACHINE_PCI_CONF_CTRL_REG_ADDR)
lui $t1, %hi(GRUB_MACHINE_PCI_CONFSPACE)
lui $t3, %hi(GRUB_CS5536_PCIID)
addiu $t3, $t3, %lo(GRUB_CS5536_PCIID)
ori $t4, $zero, 1
lui $a0, %hi(no_cs5536)
1:
andi $t4, $t4, ((1 << GRUB_PCI_NUM_DEVICES) - 1)
beql $t4, $zero, fatal
addiu $a0, $a0, %lo(no_cs5536)
/* In case of failure try again. CS5536 may be slow to come up. */
beql $t4, $zero, retry_cs5536
nop
sw $t4, %lo(GRUB_MACHINE_PCI_CONF_CTRL_REG_ADDR) ($t0)
lw $t2, (%lo(GRUB_MACHINE_PCI_CONFSPACE) + GRUB_PCI_REG_PCI_ID) ($t1)
bnel $t2, $t3, 1b
sll $t4, $t4, 1
#ifndef FULOONG
bal message
addiu $a0, $a0, %lo(cs5536_found)
bal printhex
move $a0, $t4
#endif
/* Initialise SMBus controller. */
lui $t0, %hi(GRUB_MACHINE_PCI_CONFSPACE)
li $t1, GRUB_CS5536_MSR_MAILBOX_CONFIG_ENABLED
sw $t1, (%lo(GRUB_MACHINE_PCI_CONFSPACE) + GRUB_CS5536_MSR_MAILBOX_CONFIG) ($t0)
/* Set GPIO LBAR. */
lui $a0, %hi(GRUB_CS5536_MSR_GPIO_BAR)
addiu $a0, $a0, %lo(GRUB_CS5536_MSR_GPIO_BAR)
@ -70,6 +92,15 @@ __start:
ori $a2, $zero, ((GRUB_CS5536_LBAR_MASK_MASK \
| GRUB_CS5536_LBAR_ENABLE) >> 32)
bal gpio_init
nop
#ifdef FULOONG
bal serial_hw_init
nop
#endif
/* Initialise SMBus controller. */
/* Set SMBUS LBAR. */
lui $a0, %hi(GRUB_CS5536_MSR_SMB_BAR)
addiu $a0, $a0, %lo(GRUB_CS5536_MSR_SMB_BAR)
@ -83,14 +114,6 @@ __start:
bal message
addiu $a0, $a0, %lo(smbus_enabled)
/* Enable SMBus controller pins. */
lui $t0, %hi(GRUB_MACHINE_PCI_IO_BASE + GRUB_CS5536_LBAR_GPIO)
ori $t1, $zero, GRUB_GPIO_SMBUS_PINS
sw $t1, %lo(GRUB_MACHINE_PCI_IO_BASE + GRUB_CS5536_LBAR_GPIO + GRUB_GPIO_REG_OUT_EN) ($t0)
sw $t1, %lo(GRUB_MACHINE_PCI_IO_BASE + GRUB_CS5536_LBAR_GPIO + GRUB_GPIO_REG_OUT_AUX1) ($t0)
sw $t1, %lo(GRUB_MACHINE_PCI_IO_BASE + GRUB_CS5536_LBAR_GPIO + GRUB_GPIO_REG_IN_EN) ($t0)
sw $t1, %lo(GRUB_MACHINE_PCI_IO_BASE + GRUB_CS5536_LBAR_GPIO + GRUB_GPIO_REG_IN_AUX1) ($t0)
lui $t0, %hi(GRUB_MACHINE_PCI_IO_BASE + GRUB_CS5536_LBAR_SMBUS)
/* Disable SMB. */
@ -107,7 +130,7 @@ __start:
sb $t1, %lo(GRUB_MACHINE_PCI_IO_BASE + GRUB_CS5536_LBAR_SMBUS + GRUB_CS5536_SMB_REG_CTRL3) ($t0)
sb $t1, %lo(GRUB_MACHINE_PCI_IO_BASE + GRUB_CS5536_LBAR_SMBUS + GRUB_CS5536_SMB_REG_CTRL2) ($t0)
/* Yeeloong has only one memory slot. */
/* Yeeloong and Fuloong have only one memory slot. */
/* Output first byte on serial for debugging. */
ori $a1, $zero, GRUB_SMB_RAM_START_ADDR
bal read_spd
@ -206,10 +229,54 @@ other_exception:
b fatal
addiu $a0, $a0, %lo(unhandled_exception)
gpio_init:
lui $t0, %hi(GRUB_MACHINE_PCI_IO_BASE + GRUB_CS5536_LBAR_GPIO)
addiu $t0, $t0, %lo(GRUB_MACHINE_PCI_IO_BASE + GRUB_CS5536_LBAR_GPIO)
lui $t1, %hi (gpio_dump)
addiu $t1, $t1, %lo (gpio_dump)
1:
lw $t2, 0($t1)
sw $t2, 0($t0)
addiu $t0, $t0, 4
addiu $t1, $t1, 4
lui $t2, %hi (gpio_dump_end)
addiu $t2, $t2, %lo (gpio_dump_end)
bne $t1, $t2, 1b
nop
jr $ra
nop
/* Same as similarly named C function but in asm since
we need it early. */
/* In: none. Out: none. Clobbered: $t0, $t1, $a0. */
/* In: none. Out: none. Clobbered: $t0, $t1, $t2, $a0, $a1, $a2. */
serial_hw_init:
move $t2, $ra
#ifdef FULOONG
lui $a0, %hi(GRUB_CS5536_MSR_DIVIL_LEG_IO)
addiu $a0, $a0, %lo(GRUB_CS5536_MSR_DIVIL_LEG_IO)
lui $a1, %hi (GRUB_CS5536_MSR_DIVIL_LEG_IO_UART2_COM3 \
| GRUB_CS5536_MSR_DIVIL_LEG_IO_F_REMAP \
| GRUB_CS5536_MSR_DIVIL_LEG_IO_MODE_X86 \
| GRUB_CS5536_MSR_DIVIL_LEG_IO_UART1_COM1)
ori $a1, $a1, (GRUB_CS5536_MSR_DIVIL_LEG_IO_RTC_ENABLE0 \
| GRUB_CS5536_MSR_DIVIL_LEG_IO_RTC_ENABLE1)
bal wrmsr
move $a2, $zero
lui $a0, %hi(GRUB_CS5536_MSR_DIVIL_UART1_CONF)
addiu $a0, $a0, %lo(GRUB_CS5536_MSR_DIVIL_UART1_CONF)
li $a1, 2
bal wrmsr
move $a2, $zero
lui $a0, %hi(GRUB_CS5536_MSR_DIVIL_UART2_CONF)
addiu $a0, $a0, %lo(GRUB_CS5536_MSR_DIVIL_UART2_CONF)
li $a1, 2
bal wrmsr
move $a2, $zero
#endif
lui $t0, %hi (GRUB_MACHINE_SERIAL_PORT)
/* Turn off the interrupt. */
@ -239,6 +306,7 @@ serial_hw_init:
/* Let message return to original caller. */
lui $a0, %hi(notification_string)
addiu $a0, $a0, %lo(notification_string)
move $ra, $t2
/* Print message on serial console. */
/* In: $a0 = asciiz message. Out: none. Clobbered: $t0, $t1, $a0. */
@ -379,7 +447,6 @@ read_spd_fail:
ori $v0, $v0, 0x100
notification_string: .asciz "GRUB "
no_cs5536: .asciz "No CS5536 found.\n\r"
cs5536_found: .asciz "CS5536 at "
sm_failed: .asciz "SM transaction failed.\n\r"
unhandled_tlb_refill: .asciz "Unhandled TLB refill.\n\r"
@ -404,14 +471,22 @@ regdump:
.quad 0x0100020200010101 /* 4 */
.quad 0x0a04030603050203 /* 6 */
.quad 0x0f0e040000010a0b /* 7 */
#ifdef FULOONG
.quad 0x0000000100000001 /* 8 */
#else
.quad 0x0000010200000102 /* 8 */
#endif
.quad 0x0000060c00000000 /* 9 */
.quad 0x2323233f3f1f0200 /* a */
.quad 0x5f7f232323232323 /* b */
.quad 0x002a3c0615000000 /* c */
.quad 0x002a002a002a002a /* d */
.quad 0x002a002a002a002a /* e */
#ifdef FULOONG
.quad 0x00b40020005b0004 /* f */
#else
.quad 0x00b40020006d0004 /* f */
#endif
.quad 0x070007ff00000087 /* 10 */
.quad 0x000000000016101f /* 11 */
.quad 0x001c000000000000 /* 12 */
@ -426,6 +501,45 @@ regdump:
.quad 0 /* 1b */
.quad 0 /* 1c */
/* Dump of GPIO connections. FIXME: Remove useless and macroify. */
gpio_dump:
#ifdef FULOONG
.long 0xffff0000, 0x2eefd110, 0xffff0000, 0xffff0000
.long 0x2eefd110, 0xffff0000, 0x1000efff, 0xefff1000
.long 0x3df3c20c, 0xffff0000, 0xffff0000, 0xffff0000
.long 0x7df3820c, 0x3df3c20c, 0xffff0000, 0x00000000
.long 0xffff0000, 0xffff0000, 0x3de3c21c, 0x3d83c27c
.long 0x00000000, 0x00000000, 0x00000000, 0x00000000
.long 0x00000000, 0x00000000, 0x00000000, 0x00000000
.long 0x00000000, 0x00000000, 0x00000000, 0x00000000
.long 0xffff0000, 0xffff0000, 0xffff0000, 0xffff0000
.long 0xffff0000, 0xffff0000, 0x0000ffff, 0xffff0000
.long 0xefff1000, 0xffff0000, 0xffff0000, 0xffff0000
.long 0xefff1000, 0xefff1000, 0xffff0000, 0x00000000
.long 0xffff0000, 0xffff0000, 0xefff1000, 0xefff1000
.long 0x00000000, 0x00000000, 0x00000000, 0x00000000
.long 0x00000000, 0x00000000, 0x00000000, 0x00000000
.long 0x00000000, 0x00000000, 0x00000000, 0x00000000
#else
.long 0xffff0000, 0x2ffdd002, 0xffff0000, 0xffff0000
.long 0x2fffd000, 0xffff0000, 0x1000efff, 0xefff1000
.long 0x3ffbc004, 0xffff0000, 0xffff0000, 0xffff0000
.long 0x3ffbc004, 0x3ffbc004, 0xffff0000, 0x00000000
.long 0xffff0000, 0xffff0000, 0x3ffbc004, 0x3f9bc064
.long 0x00000000, 0x00000000, 0x00000000, 0x00000000
.long 0x00000000, 0x00000000, 0x00000000, 0x00000000
.long 0x00000000, 0x00000000, 0x00000000, 0x00000000
.long 0xffff0000, 0xffff0000, 0xffff0000, 0xffff0000
.long 0xffff0000, 0xffff0000, 0x0000ffff, 0xffff0000
.long 0xefff1000, 0xffff0000, 0xffff0000, 0xffff0000
.long 0xefff1000, 0xefff1000, 0xffff0000, 0x00000000
.long 0xffff0000, 0xffff0000, 0xefff1000, 0xffff0000
.long 0x00000000, 0x00000000, 0x00000000, 0x00000000
.long 0x00000000, 0x00000000, 0x00000000, 0x00000000
.long 0x00000000, 0x50000000, 0x00000000, 0x00000000
#endif
gpio_dump_end:
.p2align
write_dumpreg:
@ -626,6 +740,10 @@ continue:
lui $t0, %hi(cached_continue - 0x20000000)
addiu $t0, $t0, %lo(cached_continue - 0x20000000)
jr $t0
addiu $a2, $zero, -1
#ifdef FULOONG
addiu $a2, $zero, -(1 + GRUB_ARCH_MACHINE_FULOONG)
#else
addiu $a2, $zero, -(1 + GRUB_ARCH_MACHINE_YEELOONG)
#endif
cached_continue:
cached_continue:

58
grub-core/boot/mips/startup_raw.S
View File

@ -20,6 +20,7 @@
#include <grub/symbol.h>
#include <grub/offsets.h>
#include <grub/machine/memory.h>
#include <grub/machine/kernel.h>
#include <grub/offsets.h>
#define BASE_ADDR 8
@ -49,15 +50,17 @@ codestart:
/* Parse arguments. Has to be done before relocation.
So need to do it in asm. */
#ifdef GRUB_MACHINE_MIPS_YEELOONG
#ifdef GRUB_MACHINE_MIPS_LOONGSON
move $s2, $zero
move $s3, $zero
move $s4, $zero
move $s5, $zero
move $s7, $zero
/* $a2 has the environment. */
addiu $t0, $a2, 1
beq $t0, $zero, argdone
addiu $t0, $zero, -0x10
and $t1, $a2, $t0
beq $t0, $t1, argfw
nop
move $t0, $a2
argcont:
@ -72,11 +75,19 @@ argcont:
nop ;\
b 2f;\
move reg, $v0; \
1:
1:
#define DO_CHECKT1(str, val) \
move $t6, $t1 ;\
addiu $t7, $s0, (str - base);\
bal do_check ;\
li $t2, val
DO_PARSE (busclockstr, $s2)
DO_PARSE (cpuclockstr, $s3)
DO_PARSE (memsizestr, $s4)
DO_PARSE (highmemsizestr, $s5)
DO_CHECKT1 (pmon_yeeloong_verstr, GRUB_ARCH_MACHINE_YEELOONG)
DO_CHECKT1 (pmon_fuloong_verstr, GRUB_ARCH_MACHINE_FULOONG)
2:
b argcont
addiu $t0, $t0, 4
@ -120,8 +131,47 @@ busclockstr: .asciiz "busclock="
cpuclockstr: .asciiz "cpuclock="
memsizestr: .asciiz "memsize="
highmemsizestr: .asciiz "highmemsize="
machtype_yeeloong_str1: .asciiz "machtype=8.9"
machtype_yeeloong_str2: .asciiz "machtype=lemote-yeeloong-"
machtype_fuloong_str: .asciiz "machtype=lemote-fuloong-"
pmon_yeeloong_str: .asciiz "PMON_VER=LM8"
pmon_fuloong_str: .asciiz "PMON_VER=LM6"
pmon_yeeloong_verstr: .asciiz "Version=LM8"
pmon_fuloong_verstr: .asciiz "Version=LM6"
.p2align 2
argdone:
beq $a0, $zero, cmdlinedone
nop
#define DO_CHECKA1(str, val) \
lw $t6, 0($a1) ;\
addiu $t7, $s0, (str - base);\
bal do_check ;\
li $t2, val
DO_CHECKA1 (machtype_yeeloong_str1, GRUB_ARCH_MACHINE_YEELOONG)
DO_CHECKA1 (machtype_yeeloong_str2, GRUB_ARCH_MACHINE_YEELOONG)
DO_CHECKA1 (pmon_yeeloong_str, GRUB_ARCH_MACHINE_YEELOONG)
DO_CHECKA1 (machtype_fuloong_str, GRUB_ARCH_MACHINE_FULOONG)
DO_CHECKA1 (pmon_fuloong_str, GRUB_ARCH_MACHINE_FULOONG)
addiu $a0, $a0, -1
b argdone
addiu $a1, $a1, 4
do_check:
lb $t4, 0($t7)
beq $t4, $zero, 1f
lb $t3, 0($t6)
bne $t3, $t4, 2f
addiu $t6, $t6, 1
b do_check
addiu $t7, $t7, 1
1:
move $s7, $t2
2:
jr $ra
nop
argfw:
not $s7, $a2
cmdlinedone:
#endif
/* Copy the decompressor. */
lui $t1, %hi(base)

56
grub-core/bus/cs5536.c
View File

@ -21,6 +21,7 @@
#include <grub/pci.h>
#include <grub/time.h>
#include <grub/ata.h>
#include <grub/machine/kernel.h>
#include <grub/dl.h>
@ -217,26 +218,6 @@ grub_cs5536_read_spd (grub_port_t smbbase, grub_uint8_t dev,
return GRUB_ERR_NONE;
}
/* Dump of GPIO connections. FIXME: Remove useless and macroify. */
static grub_uint32_t gpiodump[] = {
0xffff0000, 0x2ffdd002, 0xffff0000, 0xffff0000,
0x2fffd000, 0xffff0000, 0x1000efff, 0xefff1000,
0x3ffbc004, 0xffff0000, 0xffff0000, 0xffff0000,
0x3ffbc004, 0x3ffbc004, 0xffff0000, 0x00000000,
0xffff0000, 0xffff0000, 0x3ffbc004, 0x3f9bc064,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0xffff0000, 0xffff0000, 0xffff0000, 0xffff0000,
0xffff0000, 0xffff0000, 0x0000ffff, 0xffff0000,
0xefff1000, 0xffff0000, 0xffff0000, 0xffff0000,
0xefff1000, 0xefff1000, 0xffff0000, 0x00000000,
0xffff0000, 0xffff0000, 0xefff1000, 0xffff0000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x50000000, 0x00000000, 0x00000000,
};
static inline void
set_io_space (grub_pci_device_t dev, int num, grub_uint16_t start,
grub_uint16_t len)
@ -277,17 +258,6 @@ set_p2d (grub_pci_device_t dev, int num, int dest, grub_uint32_t start)
void
grub_cs5536_init_geode (grub_pci_device_t dev)
{
int i;
/* Make sure GPIO is where we expect it to be. */
grub_cs5536_write_msr (dev, GRUB_CS5536_MSR_GPIO_BAR,
GRUB_CS5536_LBAR_TURN_ON | GRUB_CS5536_LBAR_GPIO);
/* Setup GPIO. */
for (i = 0; i < (int) ARRAY_SIZE (gpiodump); i++)
((volatile grub_uint32_t *) (GRUB_MACHINE_PCI_IO_BASE
+ GRUB_CS5536_LBAR_GPIO)) [i] = gpiodump[i];
/* Enable more BARs. */
grub_cs5536_write_msr (dev, GRUB_CS5536_MSR_IRQ_MAP_BAR,
GRUB_CS5536_LBAR_TURN_ON | GRUB_CS5536_LBAR_IRQ_MAP);
@ -299,11 +269,25 @@ grub_cs5536_init_geode (grub_pci_device_t dev)
GRUB_CS5536_LBAR_TURN_ON | GRUB_CS5536_LBAR_PM);
/* Setup DIVIL. */
grub_cs5536_write_msr (dev, GRUB_CS5536_MSR_DIVIL_LEG_IO,
GRUB_CS5536_MSR_DIVIL_LEG_IO_MODE_X86
| GRUB_CS5536_MSR_DIVIL_LEG_IO_F_REMAP
| GRUB_CS5536_MSR_DIVIL_LEG_IO_RTC_ENABLE0
| GRUB_CS5536_MSR_DIVIL_LEG_IO_RTC_ENABLE1);
switch (grub_arch_machine)
{
case GRUB_ARCH_MACHINE_YEELOONG:
grub_cs5536_write_msr (dev, GRUB_CS5536_MSR_DIVIL_LEG_IO,
GRUB_CS5536_MSR_DIVIL_LEG_IO_MODE_X86
| GRUB_CS5536_MSR_DIVIL_LEG_IO_F_REMAP
| GRUB_CS5536_MSR_DIVIL_LEG_IO_RTC_ENABLE0
| GRUB_CS5536_MSR_DIVIL_LEG_IO_RTC_ENABLE1);
break;
case GRUB_ARCH_MACHINE_FULOONG:
grub_cs5536_write_msr (dev, GRUB_CS5536_MSR_DIVIL_LEG_IO,
GRUB_CS5536_MSR_DIVIL_LEG_IO_UART2_COM3
| GRUB_CS5536_MSR_DIVIL_LEG_IO_UART1_COM1
| GRUB_CS5536_MSR_DIVIL_LEG_IO_MODE_X86
| GRUB_CS5536_MSR_DIVIL_LEG_IO_F_REMAP
| GRUB_CS5536_MSR_DIVIL_LEG_IO_RTC_ENABLE0
| GRUB_CS5536_MSR_DIVIL_LEG_IO_RTC_ENABLE1);
break;
}
grub_cs5536_write_msr (dev, GRUB_CS5536_MSR_DIVIL_IRQ_MAPPER_PRIMARY_MASK,
(~GRUB_CS5536_DIVIL_LPC_INTERRUPTS) & 0xffff);
grub_cs5536_write_msr (dev, GRUB_CS5536_MSR_DIVIL_IRQ_MAPPER_LPC_MASK,

23
grub-core/bus/pci.c
View File

@ -20,6 +20,8 @@
#include <grub/dl.h>
#include <grub/pci.h>
#include <grub/mm.h>
#include <grub/mm_private.h>
#include <grub/cache.h>
GRUB_MOD_LICENSE ("GPLv3+");
@ -28,17 +30,24 @@ GRUB_MOD_LICENSE ("GPLv3+");
struct grub_pci_dma_chunk *
grub_memalign_dma32 (grub_size_t align, grub_size_t size)
{
return grub_memalign (align, size);
void *ret = grub_memalign (align, size);
if (!ret)
return 0;
grub_arch_sync_dma_caches (ret, size);
return ret;
}
/* FIXME: evil. */
void
grub_dma_free (struct grub_pci_dma_chunk *ch)
{
grub_size_t size = (((struct grub_mm_header *) ch) - 1)->size * GRUB_MM_ALIGN;
grub_arch_sync_dma_caches (ch, size);
grub_free (ch);
}
/* #endif */
#ifdef GRUB_MACHINE_MIPS_YEELOONG
#ifdef GRUB_MACHINE_MIPS_LOONGSON
volatile void *
grub_dma_get_virt (struct grub_pci_dma_chunk *ch)
{
@ -101,13 +110,13 @@ grub_pci_iterate (grub_pci_iteratefunc_t hook)
continue;
}
#ifdef GRUB_MACHINE_MIPS_YEELOONG
#ifdef GRUB_MACHINE_MIPS_LOONGSON
/* Skip ghosts. */
if (id == GRUB_YEELOONG_OHCI_PCIID
&& dev.function == GRUB_YEELOONG_OHCI_GHOST_FUNCTION)
if (id == GRUB_LOONGSON_OHCI_PCIID
&& dev.function == GRUB_LOONGSON_OHCI_GHOST_FUNCTION)
continue;
if (id == GRUB_YEELOONG_EHCI_PCIID
&& dev.function == GRUB_YEELOONG_EHCI_GHOST_FUNCTION)
if (id == GRUB_LOONGSON_EHCI_PCIID
&& dev.function == GRUB_LOONGSON_EHCI_GHOST_FUNCTION)
continue;
#endif

5
grub-core/commands/menuentry.c
View File

@ -91,7 +91,7 @@ grub_normal_add_menu_entry (int argc, const char **args, char **classes,
if (! menu_sourcecode)
return grub_errno;
if (classes)
if (classes && classes[0])
{
int i;
for (i = 0; classes[i]; i++); /* count # of menuentry classes */
@ -255,7 +255,8 @@ grub_cmd_menuentry (grub_extcmd_context_t ctxt, int argc, char **args)
if (! ctxt->script)
return grub_normal_add_menu_entry (argc, (const char **) args,
ctxt->state[0].args, ctxt->state[1].arg,
(ctxt->state[0].set ? ctxt->state[0].args
: NULL), ctxt->state[1].arg,
ctxt->state[2].arg, 0,
ctxt->state[3].arg,
ctxt->extcmd->cmd->name[0] == 's');

0
grub-core/commands/mips/yeeloong/lsspd.c → grub-core/commands/mips/loongson/lsspd.c
View File

35
grub-core/disk/ata.c
View File

@ -160,18 +160,23 @@ grub_atapi_identify (struct grub_ata_device *dev)
grub_ata_regset (dev, GRUB_ATA_REG_DISK, 0xE0 | dev->device << 4);
grub_ata_wait ();
if (grub_ata_check_ready (dev))
if ((grub_ata_regget (dev, GRUB_ATA_REG_STATUS) & GRUB_ATA_STATUS_BUSY)
&& grub_ata_wait_not_busy (dev, dev->present ? GRUB_ATA_TOUT_DEV_INIT
: GRUB_ATA_TOUT_STD))
{
grub_free (info);
dev->present = 0;
return grub_errno;
}
grub_ata_regset (dev, GRUB_ATA_REG_CMD, GRUB_ATA_CMD_IDENTIFY_PACKET_DEVICE);
grub_ata_wait ();
if (grub_ata_wait_drq (dev, 0, GRUB_ATA_TOUT_STD))
if (grub_ata_wait_drq (dev, 0, dev->present ? GRUB_ATA_TOUT_DEV_INIT
: GRUB_ATA_TOUT_STD))
{
grub_free (info);
dev->present = 0;
return grub_errno;
}
grub_ata_pio_read (dev, info, GRUB_DISK_SECTOR_SIZE);
@ -258,8 +263,11 @@ grub_ata_identify (struct grub_ata_device *dev)
grub_ata_regset (dev, GRUB_ATA_REG_DISK, 0xE0 | dev->device << 4);
grub_ata_wait ();
if (grub_ata_check_ready (dev))
if ((grub_ata_regget (dev, GRUB_ATA_REG_STATUS) & GRUB_ATA_STATUS_BUSY)
&& grub_ata_wait_not_busy (dev, dev->present ? GRUB_ATA_TOUT_DEV_INIT
: GRUB_ATA_TOUT_STD))
{
dev->present = 0;
grub_free (info);
return grub_errno;
}
@ -267,7 +275,8 @@ grub_ata_identify (struct grub_ata_device *dev)
grub_ata_regset (dev, GRUB_ATA_REG_CMD, GRUB_ATA_CMD_IDENTIFY_DEVICE);
grub_ata_wait ();
if (grub_ata_wait_drq (dev, 0, GRUB_ATA_TOUT_STD))
if (grub_ata_wait_drq (dev, 0, dev->present ? GRUB_ATA_TOUT_DEV_INIT
: GRUB_ATA_TOUT_STD))
{
grub_free (info);
grub_errno = GRUB_ERR_NONE;
@ -280,13 +289,18 @@ grub_ata_identify (struct grub_ata_device *dev)
return grub_atapi_identify (dev);
else if (sts == 0x00)
/* No device, return error but don't print message. */
return GRUB_ERR_UNKNOWN_DEVICE;
{
dev->present = 0;
/* No device, return error but don't print message. */
return GRUB_ERR_UNKNOWN_DEVICE;
}
else
/* Other Error. */
return grub_error (GRUB_ERR_UNKNOWN_DEVICE,
"device cannot be identified");
{
dev->present = 0;
/* Other Error. */
return grub_error (GRUB_ERR_UNKNOWN_DEVICE,
"device cannot be identified");
}
}
grub_ata_pio_read (dev, info, GRUB_DISK_SECTOR_SIZE);
@ -381,6 +395,7 @@ grub_ata_device_initialize (int port, int device, int addr, int addr2)
dev->device = device;
dev->ioaddress = addr + GRUB_MACHINE_PCI_IO_BASE;
dev->ioaddress2 = addr2 + GRUB_MACHINE_PCI_IO_BASE;
dev->present = 1;
dev->next = NULL;
/* Register the device. */

13
grub-core/font/font.c
View File

@ -316,10 +316,7 @@ load_font_index (grub_file_t file, grub_uint32_t sect_length, struct
return 1;
font->bmp_idx = grub_malloc (0x10000 * sizeof (grub_uint16_t));
if (!font->bmp_idx)
{
grub_free (font->char_index);
return 1;
}
return 1;
grub_memset (font->bmp_idx, 0xff, 0x10000 * sizeof (grub_uint16_t));
@ -494,7 +491,7 @@ grub_font_load (const char *filename)
#endif
/* Allocate the font object. */
font = (grub_font_t) grub_malloc (sizeof (struct grub_font));
font = (grub_font_t) grub_zalloc (sizeof (struct grub_font));
if (!font)
goto fail;
@ -640,6 +637,11 @@ grub_font_load (const char *filename)
return 0;
fail:
if (file)
grub_file_close (file);
if (font)
font->file = 0;
free_font (font);
return 1;
}
@ -799,6 +801,7 @@ free_font (grub_font_t font)
grub_free (font->name);
grub_free (font->family);
grub_free (font->char_index);
grub_free (font->bmp_idx);
grub_free (font);
}
}

6
grub-core/font/font_cmd.c
View File

@ -33,7 +33,11 @@ loadfont_command (grub_command_t cmd __attribute__ ((unused)),
while (argc--)
if (grub_font_load (*args++) != 0)
return GRUB_ERR_BAD_FONT;
{
if (!grub_errno)
return grub_error (GRUB_ERR_BAD_FONT, "invalid font");
return grub_errno;
}
return GRUB_ERR_NONE;
}

5
grub-core/kern/dl.c
View File

@ -626,7 +626,7 @@ grub_dl_load_file (const char *filename)
return 0;
}
mod->ref_count = 0;
mod->ref_count--;
return mod;
}
@ -683,8 +683,7 @@ grub_dl_unload (grub_dl_t mod)
{
depn = dep->next;
if (! grub_dl_unref (dep->mod))
grub_dl_unload (dep->mod);
grub_dl_unload (dep->mod);
grub_free (dep);
}

4
grub-core/kern/main.c
View File

@ -53,8 +53,8 @@ grub_module_iterate (int (*hook) (struct grub_module_header *header))
}
}
/* This is actualy platform-independant but used only on yeeloong and sparc. */
#if defined (GRUB_MACHINE_MIPS_YEELOONG) || defined (GRUB_MACHINE_SPARC64)
/* This is actualy platform-independant but used only on loongson and sparc. */
#if defined (GRUB_MACHINE_MIPS_LOONGSON) || defined (GRUB_MACHINE_SPARC64)
grub_addr_t
grub_modules_get_end (void)
{

35
grub-core/kern/mips/cache.S
View File

@ -8,3 +8,38 @@ FUNCTION (grub_cpu_flush_cache)
FUNCTION (grub_arch_sync_caches)
#include "cache_flush.S"
j $ra
FUNCTION (grub_arch_sync_dma_caches)
move $t2, $a0
addu $t3, $a0, $a1
srl $t2, $t2, 5
sll $t2, $t2, 5
addu $t3, $t3, 0x1f
srl $t3, $t3, 5
sll $t3, $t3, 5
move $t0, $t2
subu $t1, $t3, $t2
1:
cache 1, 0($t0)
addiu $t1, $t1, 0xffff
bne $t1, $zero, 1b
addiu $t0, $t0, 0x1
sync
move $t0, $t2
subu $t1, $t3, $t2
2:
cache 0, 0($t0)
addiu $t1, $t1, 0xffff
bne $t1, $zero, 2b
addiu $t0, $t0, 0x1
sync
move $t0, $t2
subu $t1, $t3, $t2
2:
cache 23, 0($t0)
addiu $t1, $t1, 0xffff
bne $t1, $zero, 2b
addiu $t0, $t0, 0x1
sync
jr $ra

37
grub-core/kern/mips/yeeloong/init.c → grub-core/kern/mips/loongson/init.c
View File

@ -34,6 +34,7 @@
#include <grub/cpu/memory.h>
extern void grub_video_sm712_init (void);
extern void grub_video_sis315pro_init (void);
extern void grub_video_init (void);
extern void grub_bitmap_init (void);
extern void grub_font_init (void);
@ -64,7 +65,7 @@ init_pci (void)
/* FIXME: autoscan for BARs and devices. */
switch (pciid)
{
case GRUB_YEELOONG_OHCI_PCIID:
case GRUB_LOONGSON_OHCI_PCIID:
addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0);
grub_pci_write (addr, 0x5025000);
addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND);
@ -76,7 +77,7 @@ init_pci (void)
addr = grub_pci_make_address (dev, GRUB_PCI_REG_STATUS);
grub_pci_write_word (addr, 0x0200 | GRUB_PCI_STATUS_CAPABILITIES);
break;
case GRUB_YEELOONG_EHCI_PCIID:
case GRUB_LOONGSON_EHCI_PCIID:
addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0);
grub_pci_write (addr, 0x5026000);
addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND);
@ -148,7 +149,7 @@ grub_machine_init (void)
if (err)
grub_fatal ("Couldn't init SMBus: %s\n", grub_errmsg);
/* Yeeloong has only one memory slot. */
/* Yeeloong and Fuloong have only one memory slot. */
err = grub_cs5536_read_spd (smbbase, GRUB_SMB_RAM_START_ADDR, &spd);
if (err)
grub_fatal ("Couldn't read SPD: %s\n", grub_errmsg);
@ -187,12 +188,14 @@ grub_machine_init (void)
relies on a working heap. */
grub_video_init ();
grub_video_sm712_init ();
grub_video_sis315pro_init ();
grub_bitmap_init ();
grub_font_init ();
grub_gfxterm_init ();
grub_keylayouts_init ();
grub_at_keyboard_init ();
if (grub_arch_machine == GRUB_ARCH_MACHINE_YEELOONG)
grub_at_keyboard_init ();
grub_terminfo_init ();
grub_serial_init ();
@ -208,10 +211,28 @@ grub_machine_fini (void)
void
grub_halt (void)
{
grub_outb (grub_inb (GRUB_CPU_LOONGSON_GPIOCFG)
& ~GRUB_CPU_LOONGSON_SHUTDOWN_GPIO, GRUB_CPU_LOONGSON_GPIOCFG);
grub_millisleep (1500);
switch (grub_arch_machine)
{
case GRUB_ARCH_MACHINE_FULOONG:
{
grub_pci_device_t dev;
grub_port_t p;
if (grub_cs5536_find (&dev))
{
p = (grub_cs5536_read_msr (dev, GRUB_CS5536_MSR_GPIO_BAR)
& GRUB_CS5536_LBAR_ADDR_MASK) + GRUB_MACHINE_PCI_IO_BASE;
grub_outl ((1 << 13), p + 4);
grub_outl ((1 << 29), p);
grub_millisleep (5000);
}
}
break;
case GRUB_ARCH_MACHINE_YEELOONG:
grub_outb (grub_inb (GRUB_CPU_LOONGSON_GPIOCFG)
& ~GRUB_CPU_YEELOONG_SHUTDOWN_GPIO, GRUB_CPU_LOONGSON_GPIOCFG);
grub_millisleep (1500);
break;
}
grub_printf ("Shutdown failed\n");
grub_refresh ();

10
grub-core/kern/mips/startup.S
View File

@ -20,6 +20,7 @@
#include <grub/symbol.h>
#include <grub/offsets.h>
#include <grub/machine/memory.h>
#include <grub/machine/kernel.h>
#include <grub/offsets.h>
#define BASE_ADDR 8
@ -35,7 +36,7 @@ start:
bal cont
nop
. = _start + GRUB_KERNEL_MIPS_YEELOONG_TOTAL_MODULE_SIZE
. = _start + GRUB_KERNEL_MIPS_LOONGSON_TOTAL_MODULE_SIZE
total_module_size:
.long 0
@ -52,25 +53,28 @@ VARIABLE(grub_prefix)
. = _start + GRUB_KERNEL_MACHINE_PREFIX_END
VARIABLE (grub_arch_cpuclock)
.long 0
#ifdef GRUB_MACHINE_MIPS_YEELOONG
#ifdef GRUB_MACHINE_MIPS_LOONGSON
VARIABLE (grub_arch_busclock)
.long 0
VARIABLE (grub_arch_memsize)
.long 0
VARIABLE (grub_arch_highmemsize)
.long 0
VARIABLE (grub_arch_machine)
.long GRUB_ARCH_MACHINE_FULOONG
#endif
cont:
/* Save our base. */
move $s0, $ra
#ifdef GRUB_MACHINE_MIPS_YEELOONG
#ifdef GRUB_MACHINE_MIPS_LOONGSON
lui $t1, %hi(grub_arch_busclock)
addiu $t1, %lo(grub_arch_busclock)
sw $s2, 0($t1)
sw $s3, 4($t1)
sw $s4, 8($t1)
sw $s5, 12($t1)
sw $s7, 16($t1)
#endif
/* Move the modules out of BSS. */

2
grub-core/kern/mm.c
View File

@ -311,11 +311,13 @@ grub_memalign (grub_size_t align, grub_size_t size)
count++;
goto again;
#if 0
case 1:
/* Unload unneeded modules. */
grub_dl_unload_unneeded ();
count++;
goto again;
#endif
default:
break;

49
grub-core/loader/mips/linux.c
View File

@ -33,15 +33,14 @@ GRUB_MOD_LICENSE ("GPLv3+");
/* For frequencies. */
#include <grub/machine/time.h>
#ifdef GRUB_MACHINE_MIPS_YEELOONG
#ifdef GRUB_MACHINE_MIPS_LOONGSON
#include <grub/pci.h>
/* This can be detected on runtime from PMON, but:
a) it wouldn't work when GRUB is the firmware
and
b) for now we only support Yeeloong anyway. */
#define LOONGSON_MACHTYPE "machtype=lemote-yeeloong-2f-8.9inches"
const char loongson_machtypes[][60] =
{
[GRUB_ARCH_MACHINE_YEELOONG] = "machtype=lemote-yeeloong-2f-8.9inches",
[GRUB_ARCH_MACHINE_FULOONG] = "machtype=lemote-fuloong-2f-unknown"
};
#endif
static grub_dl_t my_mod;
@ -55,7 +54,7 @@ static grub_uint8_t *playground;
static grub_addr_t target_addr, entry_addr;
static int linux_argc;
static grub_off_t argv_off;
#ifdef GRUB_MACHINE_MIPS_YEELOONG
#ifdef GRUB_MACHINE_MIPS_LOONGSON
static grub_off_t envp_off;
#endif
static grub_off_t rd_addr_arg_off, rd_size_arg_off;
@ -70,7 +69,7 @@ grub_linux_boot (void)
state.gpr[1] = entry_addr;
state.gpr[4] = linux_argc;
state.gpr[5] = target_addr + argv_off;
#ifdef GRUB_MACHINE_MIPS_YEELOONG
#ifdef GRUB_MACHINE_MIPS_LOONGSON
state.gpr[6] = target_addr + envp_off;
#else
state.gpr[6] = 0;
@ -213,7 +212,7 @@ grub_cmd_linux (grub_command_t cmd __attribute__ ((unused)),
grub_uint32_t *linux_argv;
char *linux_args;
grub_err_t err;
#ifdef GRUB_MACHINE_MIPS_YEELOONG
#ifdef GRUB_MACHINE_MIPS_LOONGSON
char *linux_envs;
grub_uint32_t *linux_envp;
#endif
@ -238,7 +237,7 @@ grub_cmd_linux (grub_command_t cmd __attribute__ ((unused)),
/* For arguments. */
linux_argc = argc;
#ifdef LOONGSON_MACHTYPE
#ifdef GRUB_MACHINE_MIPS_LOONGSON
linux_argc++;
#endif
/* Main arguments. */
@ -253,8 +252,8 @@ grub_cmd_linux (grub_command_t cmd __attribute__ ((unused)),
/* Normal arguments. */
for (i = 1; i < argc; i++)
size += ALIGN_UP (grub_strlen (argv[i]) + 1, 4);
#ifdef LOONGSON_MACHTYPE
size += ALIGN_UP (sizeof (LOONGSON_MACHTYPE), 4);
#ifdef GRUB_MACHINE_MIPS_LOONGSON
size += ALIGN_UP (sizeof (loongson_machtypes[0]), 4);
#endif
/* rd arguments. */
@ -293,14 +292,20 @@ grub_cmd_linux (grub_command_t cmd __attribute__ ((unused)),
linux_argv++;
linux_args += ALIGN_UP (sizeof ("a0"), 4);
#ifdef LOONGSON_MACHTYPE
/* In Loongson platform, it is the responsibility of the bootloader/firmware
to supply the OS kernel with machine type information. */
grub_memcpy (linux_args, LOONGSON_MACHTYPE, sizeof (LOONGSON_MACHTYPE));
*linux_argv = (grub_uint8_t *) linux_args - (grub_uint8_t *) playground
+ target_addr;
linux_argv++;
linux_args += ALIGN_UP (sizeof (LOONGSON_MACHTYPE), 4);
#ifdef GRUB_MACHINE_MIPS_LOONGSON
{
unsigned mtype = grub_arch_machine;
if (mtype >= ARRAY_SIZE (loongson_machtypes))
mtype = 0;
/* In Loongson platform, it is the responsibility of the bootloader/firmware
to supply the OS kernel with machine type information. */
grub_memcpy (linux_args, loongson_machtypes[mtype],
sizeof (loongson_machtypes[mtype]));
*linux_argv = (grub_uint8_t *) linux_args - (grub_uint8_t *) playground
+ target_addr;
linux_argv++;
linux_args += ALIGN_UP (sizeof (loongson_machtypes[mtype]), 4);
}
#endif
for (i = 1; i < argc; i++)
@ -327,7 +332,7 @@ grub_cmd_linux (grub_command_t cmd __attribute__ ((unused)),
extra = linux_args;
#ifdef GRUB_MACHINE_MIPS_YEELOONG
#ifdef GRUB_MACHINE_MIPS_LOONGSON
linux_envp = extra;
envp_off = (grub_uint8_t *) linux_envp - (grub_uint8_t *) playground;
linux_envs = (char *) (linux_envp + 5);

10
grub-core/term/at_keyboard.c
View File

@ -111,12 +111,12 @@ static const struct
{0x38, GRUB_KEYBOARD_KEY_RIGHT_ALT},
{0x47, GRUB_KEYBOARD_KEY_HOME},
{0x48, GRUB_KEYBOARD_KEY_UP},
{0x49, GRUB_KEYBOARD_KEY_NPAGE},
{0x49, GRUB_KEYBOARD_KEY_PPAGE},
{0x4b, GRUB_KEYBOARD_KEY_LEFT},
{0x4d, GRUB_KEYBOARD_KEY_RIGHT},
{0x4f, GRUB_KEYBOARD_KEY_END},
{0x50, GRUB_KEYBOARD_KEY_DOWN},
{0x51, GRUB_KEYBOARD_KEY_PPAGE},
{0x51, GRUB_KEYBOARD_KEY_NPAGE},
{0x52, GRUB_KEYBOARD_KEY_INSERT},
{0x53, GRUB_KEYBOARD_KEY_DELETE},
};
@ -259,7 +259,7 @@ grub_keyboard_controller_write (grub_uint8_t c)
grub_outb (c, KEYBOARD_REG_DATA);
}
#if !defined (GRUB_MACHINE_MIPS_YEELOONG) && !defined (GRUB_MACHINE_QEMU)
#if !defined (GRUB_MACHINE_MIPS_LOONGSON) && !defined (GRUB_MACHINE_QEMU)
static grub_uint8_t
grub_keyboard_controller_read (void)
@ -332,7 +332,7 @@ set_scancodes (void)
return;
}
#if !(defined (GRUB_MACHINE_MIPS_YEELOONG) || defined (GRUB_MACHINE_QEMU))
#if !(defined (GRUB_MACHINE_MIPS_LOONGSON) || defined (GRUB_MACHINE_QEMU))
current_set = 1;
return;
#endif
@ -569,7 +569,7 @@ grub_keyboard_controller_init (struct grub_term_input *term __attribute__ ((unus
keyboard_controller_wait_until_ready ();
grub_inb (KEYBOARD_REG_DATA);
}
#if defined (GRUB_MACHINE_MIPS_YEELOONG) || defined (GRUB_MACHINE_QEMU)
#if defined (GRUB_MACHINE_MIPS_LOONGSON) || defined (GRUB_MACHINE_QEMU)
grub_keyboard_controller_orig = 0;
grub_keyboard_orig_set = 2;
#else

26
grub-core/term/ns8250.c
View File

@ -37,7 +37,8 @@ static const grub_port_t serial_hw_io_addr[] = GRUB_MACHINE_SERIAL_PORTS;
/* Convert speed to divisor. */
static unsigned short
serial_get_divisor (unsigned int speed)
serial_get_divisor (const struct grub_serial_port *port,
const struct grub_serial_config *config)
{
unsigned int i;
@ -63,13 +64,16 @@ serial_get_divisor (unsigned int speed)
/* Set the baud rate. */
for (i = 0; i < ARRAY_SIZE (divisor_tab); i++)
if (divisor_tab[i].speed == speed)
/* UART in Yeeloong runs twice the usual rate. */
#ifdef GRUB_MACHINE_MIPS_YEELOONG
return 2 * divisor_tab[i].div;
#else
return divisor_tab[i].div;
if (divisor_tab[i].speed == config->speed)
{
/* internal Loongson UART runs twice the usual rate. */
#ifdef GRUB_MACHINE_MIPS_LOONGSON
if (port->port == 0xbff003f8)
return 2 * divisor_tab[i].div;
else
#endif
return divisor_tab[i].div;
}
return 0;
}
@ -93,7 +97,7 @@ do_real_config (struct grub_serial_port *port)
port->broken = 0;
divisor = serial_get_divisor (port->config.speed);
divisor = serial_get_divisor (port, &port->config);
/* Turn off the interrupt. */
grub_outb (0, port->port + UART_IER);
@ -111,8 +115,8 @@ do_real_config (struct grub_serial_port *port)
| stop_bits[port->config.stop_bits]);
grub_outb (status, port->port + UART_LCR);
/* In Yeeloong serial port has only 3 wires. */
#ifndef GRUB_MACHINE_MIPS_YEELOONG
/* On Loongson machines serial port has only 3 wires. */
#ifndef GRUB_MACHINE_MIPS_LOONGSON
/* Enable the FIFO. */
grub_outb (UART_ENABLE_FIFO_TRIGGER1, port->port + UART_FCR);
@ -188,7 +192,7 @@ serial_hw_configure (struct grub_serial_port *port,
{
unsigned short divisor;
divisor = serial_get_divisor (config->speed);
divisor = serial_get_divisor (port, config);
if (divisor == 0)
return grub_error (GRUB_ERR_BAD_ARGUMENT, "bad speed");

18
grub-core/term/serial.c
View File

@ -26,6 +26,9 @@
#include <grub/extcmd.h>
#include <grub/i18n.h>
#include <grub/list.h>
#ifdef GRUB_MACHINE_MIPS_LOONGSON
#include <grub/machine/kernel.h>
#endif
GRUB_MOD_LICENSE ("GPLv3+");
@ -297,18 +300,23 @@ grub_serial_register (struct grub_serial_port *port)
port->term_in = in;
port->term_out = out;
grub_terminfo_output_register (out, "vt100");
#ifdef GRUB_MACHINE_MIPS_YEELOONG
if (grub_strcmp (port->name, "com0") == 0)
#ifdef GRUB_MACHINE_MIPS_LOONGSON
if (grub_strcmp (port->name,
(grub_arch_machine == GRUB_ARCH_MACHINE_YEELOONG)
? "com0" : "com2") == 0)
{
grub_term_register_input_active ("serial_*", in);
grub_term_register_output_active ("serial_*", out);
}
else
#endif
{
grub_term_register_input ("serial_*", in);
grub_term_register_output ("serial_*", out);
grub_term_register_input_inactive ("serial_*", in);
grub_term_register_output_inactive ("serial_*", out);
}
#else
grub_term_register_input ("serial_*", in);
grub_term_register_output ("serial_*", out);
#endif
return GRUB_ERR_NONE;
}

246
grub-core/video/sis315pro.c Normal file
View File

@ -0,0 +1,246 @@
/*
* GRUB -- GRand Unified Bootloader
* Copyright (C) 2005,2006,2007,2008,2009,2010 Free Software Foundation, Inc.
*
* GRUB is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* GRUB is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with GRUB. If not, see <http://www.gnu.org/licenses/>.
*/
#define grub_video_render_target grub_video_fbrender_target
#include <grub/err.h>
#include <grub/types.h>
#include <grub/dl.h>
#include <grub/misc.h>
#include <grub/mm.h>
#include <grub/video.h>
#include <grub/video_fb.h>
#include <grub/pci.h>
#include <grub/vga.h>
#define GRUB_SIS315PRO_PCIID 0x03251039
#define GRUB_SIS315PRO_TOTAL_MEMORY_SPACE 0x800000
static struct
{
struct grub_video_mode_info mode_info;
struct grub_video_render_target *render_target;
grub_uint8_t *ptr;
int mapped;
grub_uint32_t base;
grub_pci_device_t dev;
} framebuffer;
#ifndef TEST
static grub_err_t
grub_video_sis315pro_video_init (void)
{
/* Reset frame buffer. */
grub_memset (&framebuffer, 0, sizeof(framebuffer));
return grub_video_fb_init ();
}
static grub_err_t
grub_video_sis315pro_video_fini (void)
{
if (framebuffer.mapped)
grub_pci_device_unmap_range (framebuffer.dev, framebuffer.ptr,
GRUB_SIS315PRO_TOTAL_MEMORY_SPACE);
return grub_video_fb_fini ();
}
#endif
static grub_err_t
grub_video_sis315pro_setup (unsigned int width, unsigned int height,
unsigned int mode_type,
unsigned int mode_mask __attribute__ ((unused)))
{
int depth;
grub_err_t err;
int found = 0;
#ifndef TEST
auto int NESTED_FUNC_ATTR find_card (grub_pci_device_t dev, grub_pci_id_t pciid __attribute__ ((unused)));
int NESTED_FUNC_ATTR find_card (grub_pci_device_t dev, grub_pci_id_t pciid __attribute__ ((unused)))
{
grub_pci_address_t addr;
grub_uint32_t class;
addr = grub_pci_make_address (dev, GRUB_PCI_REG_CLASS);
class = grub_pci_read (addr);
if (((class >> 16) & 0xffff) != GRUB_PCI_CLASS_SUBCLASS_VGA
|| pciid != GRUB_SIS315PRO_PCIID)
return 0;
found = 1;
addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0);
framebuffer.base = grub_pci_read (addr);
framebuffer.dev = dev;
return 1;
}
/* Decode depth from mode_type. If it is zero, then autodetect. */
depth = (mode_type & GRUB_VIDEO_MODE_TYPE_DEPTH_MASK)
>> GRUB_VIDEO_MODE_TYPE_DEPTH_POS;
if ((width != 640 && width != 0) || (height != 400 && height != 0)
|| (depth != 8 && depth != 0))
return grub_error (GRUB_ERR_NOT_IMPLEMENTED_YET,
"Only 640x400x8 is supported");
grub_pci_iterate (find_card);
if (!found)
return grub_error (GRUB_ERR_IO, "Couldn't find graphics card");
#endif
/* Fill mode info details. */
framebuffer.mode_info.width = 640;
framebuffer.mode_info.height = 400;
framebuffer.mode_info.mode_type = GRUB_VIDEO_MODE_TYPE_INDEX_COLOR;
framebuffer.mode_info.bpp = 8;
framebuffer.mode_info.bytes_per_pixel = 1;
framebuffer.mode_info.pitch = 640 * 1;
framebuffer.mode_info.number_of_colors = 256;
framebuffer.mode_info.red_mask_size = 0;
framebuffer.mode_info.red_field_pos = 0;
framebuffer.mode_info.green_mask_size = 0;
framebuffer.mode_info.green_field_pos = 0;
framebuffer.mode_info.blue_mask_size = 0;
framebuffer.mode_info.blue_field_pos = 0;
framebuffer.mode_info.reserved_mask_size = 0;
framebuffer.mode_info.reserved_field_pos = 0;
#ifndef TEST
framebuffer.mode_info.blit_format
= grub_video_get_blit_format (&framebuffer.mode_info);
#endif
/* We can safely discard volatile attribute. */
#ifndef TEST
framebuffer.ptr
= (void *) grub_pci_device_map_range (framebuffer.dev,
framebuffer.base,
GRUB_SIS315PRO_TOTAL_MEMORY_SPACE);
#endif
framebuffer.mapped = 1;
#ifndef TEST
/* Prevent garbage from appearing on the screen. */
grub_memset (framebuffer.ptr, 0,
framebuffer.mode_info.height * framebuffer.mode_info.pitch);
#endif
#ifndef TEST
err = grub_video_fb_create_render_target_from_pointer (&framebuffer
.render_target,
&framebuffer.mode_info,
framebuffer.ptr);
if (err)
return err;
err = grub_video_fb_set_active_render_target (framebuffer.render_target);
if (err)
return err;
/* Copy default palette to initialize emulated palette. */
err = grub_video_fb_set_palette (0, GRUB_VIDEO_FBSTD_NUMCOLORS,
grub_video_fbstd_colors);
#endif
return err;
}
#ifndef TEST
static grub_err_t
grub_video_sis315pro_swap_buffers (void)
{
/* TODO: Implement buffer swapping. */
return GRUB_ERR_NONE;
}
static grub_err_t
grub_video_sis315pro_set_active_render_target (struct grub_video_render_target *target)
{
if (target == GRUB_VIDEO_RENDER_TARGET_DISPLAY)
target = framebuffer.render_target;
return grub_video_fb_set_active_render_target (target);
}
static grub_err_t
grub_video_sis315pro_get_info_and_fini (struct grub_video_mode_info *mode_info,
void **framebuf)
{
grub_memcpy (mode_info, &(framebuffer.mode_info), sizeof (*mode_info));
*framebuf = (char *) framebuffer.ptr;
grub_video_fb_fini ();
return GRUB_ERR_NONE;
}
static struct grub_video_adapter grub_video_sis315pro_adapter =
{
.name = "SIS315PRO Video Driver",
.id = GRUB_VIDEO_DRIVER_SIS315PRO,
.prio = GRUB_VIDEO_ADAPTER_PRIO_NATIVE,
.init = grub_video_sis315pro_video_init,
.fini = grub_video_sis315pro_video_fini,
.setup = grub_video_sis315pro_setup,
.get_info = grub_video_fb_get_info,
.get_info_and_fini = grub_video_sis315pro_get_info_and_fini,
.set_palette = grub_video_fb_set_palette,
.get_palette = grub_video_fb_get_palette,
.set_viewport = grub_video_fb_set_viewport,
.get_viewport = grub_video_fb_get_viewport,
.map_color = grub_video_fb_map_color,
.map_rgb = grub_video_fb_map_rgb,
.map_rgba = grub_video_fb_map_rgba,
.unmap_color = grub_video_fb_unmap_color,
.fill_rect = grub_video_fb_fill_rect,
.blit_bitmap = grub_video_fb_blit_bitmap,
.blit_render_target = grub_video_fb_blit_render_target,
.scroll = grub_video_fb_scroll,
.swap_buffers = grub_video_sis315pro_swap_buffers,
.create_render_target = grub_video_fb_create_render_target,
.delete_render_target = grub_video_fb_delete_render_target,
.set_active_render_target = grub_video_sis315pro_set_active_render_target,
.get_active_render_target = grub_video_fb_get_active_render_target,
.next = 0
};
GRUB_MOD_INIT(video_sis315pro)
{
grub_video_register (&grub_video_sis315pro_adapter);
}
GRUB_MOD_FINI(video_sis315pro)
{
grub_video_unregister (&grub_video_sis315pro_adapter);
}
#else
int
main ()
{
grub_video_sis315pro_setup (640, 400, 0, 0);
}
#endif

5
include/grub/ata.h
View File

@ -94,7 +94,8 @@ enum grub_ata_commands
enum grub_ata_timeout_milliseconds
{
GRUB_ATA_TOUT_STD = 1000, /* 1s standard timeout. */
GRUB_ATA_TOUT_DATA = 10000 /* 10s DATA I/O timeout. */
GRUB_ATA_TOUT_DATA = 10000, /* 10s DATA I/O timeout. */
GRUB_ATA_TOUT_DEV_INIT = 10000, /* Give the device 10s on first try to spinon. */
};
struct grub_ata_device
@ -128,6 +129,8 @@ struct grub_ata_device
/* Set to 0 for ATA, set to 1 for ATAPI. */
int atapi;
int present;
struct grub_ata_device *next;
};

10
include/grub/cache.h
View File

@ -37,4 +37,14 @@ grub_arch_sync_caches (void *address __attribute__ ((unused)),
void EXPORT_FUNC(grub_arch_sync_caches) (void *address, grub_size_t len);
#endif
#ifdef _mips
void EXPORT_FUNC(grub_arch_sync_dma_caches) (void *address, grub_size_t len);
#else
static inline void
grub_arch_sync_dma_caches (void *address __attribute__ ((unused)),
grub_size_t len __attribute__ ((unused)))
{
}
#endif
#endif /* ! GRUB_CACHE_HEADER */

12
include/grub/cs5536.h
View File

@ -26,9 +26,11 @@
#endif
#define GRUB_CS5536_PCIID 0x208f1022
#define GRUB_CS5536_MSR_MAILBOX_ADDR 0xf4
#define GRUB_CS5536_MSR_MAILBOX_DATA0 0xf8
#define GRUB_CS5536_MSR_MAILBOX_DATA1 0xfc
#define GRUB_CS5536_MSR_MAILBOX_CONFIG_ENABLED 0x1
#define GRUB_CS5536_MSR_MAILBOX_CONFIG 0xf0
#define GRUB_CS5536_MSR_MAILBOX_ADDR 0xf4
#define GRUB_CS5536_MSR_MAILBOX_DATA0 0xf8
#define GRUB_CS5536_MSR_MAILBOX_DATA1 0xfc
#define GRUB_CS5536_MSR_IRQ_MAP_BAR 0x80000008
#define GRUB_CS5536_MSR_SMB_BAR 0x8000000b
@ -73,11 +75,15 @@
#define GRUB_CS5536_MSR_DIVIL_LEG_IO_RTC_ENABLE1 0x00000002
#define GRUB_CS5536_MSR_DIVIL_LEG_IO_MODE_X86 0x10000000
#define GRUB_CS5536_MSR_DIVIL_LEG_IO_F_REMAP 0x04000000
#define GRUB_CS5536_MSR_DIVIL_LEG_IO_UART1_COM1 0x00070000
#define GRUB_CS5536_MSR_DIVIL_LEG_IO_UART2_COM3 0x00500000
#define GRUB_CS5536_MSR_DIVIL_IRQ_MAPPER_PRIMARY_MASK 0x80000024
#define GRUB_CS5536_MSR_DIVIL_IRQ_MAPPER_LPC_MASK 0x80000025
#define GRUB_CS5536_DIVIL_LPC_INTERRUPTS 0x1002
#define GRUB_CS5536_MSR_DIVIL_LPC_SERIAL_IRQ_CONTROL 0x8000004e
#define GRUB_CS5536_MSR_DIVIL_LPC_SERIAL_IRQ_CONTROL_ENABLE 0x80
#define GRUB_CS5536_MSR_DIVIL_UART1_CONF 0x8000003a
#define GRUB_CS5536_MSR_DIVIL_UART2_CONF 0x8000003e
#define GRUB_CS5536_MSR_USB_OHCI_BASE 0x40000008
#define GRUB_CS5536_MSR_USB_EHCI_BASE 0x40000009

2
include/grub/mips/loongson.h
View File

@ -80,6 +80,6 @@
#define GRUB_CPU_LOONGSON_PCI_HIT1_SEL_HI 0xbfe00154
#define GRUB_CPU_LOONGSON_GPIOCFG 0xbfe00120
#define GRUB_CPU_LOONGSON_SHUTDOWN_GPIO 1
#define GRUB_CPU_YEELOONG_SHUTDOWN_GPIO 1
#endif

0
include/grub/mips/yeeloong/at_keyboard.h → include/grub/mips/loongson/at_keyboard.h
View File

0
include/grub/mips/yeeloong/cmos.h → include/grub/mips/loongson/cmos.h
View File

0
include/grub/mips/yeeloong/ec.h → include/grub/mips/loongson/ec.h
View File

34
include/grub/mips/loongson/kernel.h Normal file
View File

@ -0,0 +1,34 @@
/*
* GRUB -- GRand Unified Bootloader
* Copyright (C) 2005,2006,2007,2008,2009 Free Software Foundation, Inc.
*
* GRUB is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* GRUB is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with GRUB. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef GRUB_KERNEL_MACHINE_HEADER
#define GRUB_KERNEL_MACHINE_HEADER 1
#include <grub/symbol.h>
#include <grub/cpu/kernel.h>
#define GRUB_ARCH_MACHINE_YEELOONG 0
#define GRUB_ARCH_MACHINE_FULOONG 1
#ifndef ASM_FILE
extern grub_uint32_t EXPORT_VAR (grub_arch_machine);
#endif
#endif /* ! GRUB_KERNEL_MACHINE_HEADER */

0
include/grub/mips/yeeloong/memory.h → include/grub/mips/loongson/memory.h
View File

8
include/grub/mips/yeeloong/pci.h → include/grub/mips/loongson/pci.h
View File

@ -24,10 +24,10 @@
#include <grub/cpu/io.h>
#endif
#define GRUB_YEELOONG_OHCI_PCIID 0x00351033
#define GRUB_YEELOONG_EHCI_PCIID 0x00e01033
#define GRUB_YEELOONG_OHCI_GHOST_FUNCTION 4
#define GRUB_YEELOONG_EHCI_GHOST_FUNCTION 5
#define GRUB_LOONGSON_OHCI_PCIID 0x00351033
#define GRUB_LOONGSON_EHCI_PCIID 0x00e01033
#define GRUB_LOONGSON_OHCI_GHOST_FUNCTION 4
#define GRUB_LOONGSON_EHCI_GHOST_FUNCTION 5
#define GRUB_PCI_NUM_BUS 1
#define GRUB_PCI_NUM_DEVICES 16

9
include/grub/mips/yeeloong/serial.h → include/grub/mips/loongson/serial.h
View File

@ -19,11 +19,14 @@
#ifndef GRUB_MACHINE_SERIAL_HEADER
#define GRUB_MACHINE_SERIAL_HEADER 1
#define GRUB_MACHINE_SERIAL_DIVISOR_115200 2
#define GRUB_MACHINE_SERIAL_PORT 0xbff003f8
#define GRUB_MACHINE_SERIAL_PORT0_DIVISOR_115200 2
#define GRUB_MACHINE_SERIAL_PORT2_DIVISOR_115200 1
#define GRUB_MACHINE_SERIAL_PORT0 0xbff003f8
#define GRUB_MACHINE_SERIAL_PORT1 0xbfd003f8
#define GRUB_MACHINE_SERIAL_PORT2 0xbfd002f8
#ifndef ASM_FILE
#define GRUB_MACHINE_SERIAL_PORTS { GRUB_MACHINE_SERIAL_PORT }
#define GRUB_MACHINE_SERIAL_PORTS { GRUB_MACHINE_SERIAL_PORT0, GRUB_MACHINE_SERIAL_PORT1, GRUB_MACHINE_SERIAL_PORT2 }
#else
#endif

0
include/grub/mips/yeeloong/time.h → include/grub/mips/loongson/time.h
View File

1
include/grub/mips/yeeloong/kernel.h
View File

@ -1 +0,0 @@
#include <grub/cpu/kernel.h>

16
include/grub/offsets.h
View File

@ -100,16 +100,16 @@
#define GRUB_KERNEL_POWERPC_IEEE1275_LINK_ALIGN 4
#define GRUB_KERNEL_POWERPC_IEEE1275_LINK_ADDR 0x200000
#define GRUB_KERNEL_MIPS_YEELOONG_LINK_ADDR 0x80200000
#define GRUB_KERNEL_MIPS_LOONGSON_LINK_ADDR 0x80200000
#define GRUB_KERNEL_MIPS_YEELOONG_LINK_ALIGN 32
#define GRUB_KERNEL_MIPS_LOONGSON_LINK_ALIGN 32
#define GRUB_KERNEL_MIPS_YEELOONG_COMPRESSED_SIZE 0x8
#define GRUB_KERNEL_MIPS_YEELOONG_UNCOMPRESSED_SIZE 0xc
#define GRUB_KERNEL_MIPS_LOONGSON_COMPRESSED_SIZE 0x8
#define GRUB_KERNEL_MIPS_LOONGSON_UNCOMPRESSED_SIZE 0xc
#define GRUB_KERNEL_MIPS_YEELOONG_TOTAL_MODULE_SIZE 0x08
#define GRUB_KERNEL_MIPS_YEELOONG_PREFIX 0x0c
#define GRUB_KERNEL_MIPS_YEELOONG_PREFIX_END 0x54
#define GRUB_KERNEL_MIPS_LOONGSON_TOTAL_MODULE_SIZE 0x08
#define GRUB_KERNEL_MIPS_LOONGSON_PREFIX 0x0c
#define GRUB_KERNEL_MIPS_LOONGSON_PREFIX_END 0x54
#define GRUB_KERNEL_MIPS_ARC_LINK_ADDR 0x8a000000
@ -155,7 +155,7 @@
#define GRUB_KERNEL_POWERPC_IEEE1275_MOD_ALIGN 0x1000
#define GRUB_KERNEL_MIPS_YEELOONG_MOD_ALIGN 0x1
#define GRUB_KERNEL_MIPS_LOONGSON_MOD_ALIGN 0x1
#define GRUB_KERNEL_MIPS_ARC_MOD_ALIGN 0x1
/* Minimal gap between _end and the start of the modules. It's a hack

2
include/grub/serial.h
View File

@ -102,7 +102,7 @@ grub_serial_config_defaults (struct grub_serial_port *port)
{
struct grub_serial_config config =
{
#ifdef GRUB_MACHINE_MIPS_YEELOONG
#ifdef GRUB_MACHINE_MIPS_LOONGSON
.speed = 115200,
#else
.speed = 9600,

16
include/grub/term.h
View File

@ -248,6 +248,14 @@ grub_term_register_input (const char *name __attribute__ ((unused)),
}
}
static inline void
grub_term_register_input_inactive (const char *name __attribute__ ((unused)),
grub_term_input_t term)
{
grub_list_push (GRUB_AS_LIST_P (&grub_term_inputs_disabled),
GRUB_AS_LIST (term));
}
static inline void
grub_term_register_input_active (const char *name __attribute__ ((unused)),
grub_term_input_t term)
@ -272,6 +280,14 @@ grub_term_register_output (const char *name __attribute__ ((unused)),
}
}
static inline void
grub_term_register_output_inactive (const char *name __attribute__ ((unused)),
grub_term_output_t term)
{
grub_list_push (GRUB_AS_LIST_P (&grub_term_outputs_disabled),
GRUB_AS_LIST (term));
}
static inline void
grub_term_register_output_active (const char *name __attribute__ ((unused)),
grub_term_output_t term)

3
include/grub/video.h
View File

@ -211,7 +211,8 @@ typedef enum grub_video_driver_id
GRUB_VIDEO_DRIVER_VGA,
GRUB_VIDEO_DRIVER_CIRRUS,
GRUB_VIDEO_DRIVER_BOCHS,
GRUB_VIDEO_DRIVER_SDL
GRUB_VIDEO_DRIVER_SDL,
GRUB_VIDEO_DRIVER_SIS315PRO,
} grub_video_driver_id_t;
typedef enum grub_video_adapter_prio

6
util/grub-install.in
View File

@ -554,13 +554,13 @@ fi
case "${target_cpu}-${platform}" in
sparc64-ieee1275) mkimage_target=sparc64-ieee1275-raw ;;
mips-yeeloong) mkimage_target=mipsel-yeeloong-elf ;;
mips-loongson) mkimage_target=mipsel-loongson-elf ;;
*) mkimage_target="${target_cpu}-${platform}" ;;
esac
case "${target_cpu}-${platform}" in
i386-efi | x86_64-efi) imgext=efi ;;
mips-yeeloong | i386-coreboot | i386-multiboot | i386-ieee1275 \
mips-loongson | i386-coreboot | i386-multiboot | i386-ieee1275 \
| powerpc-ieee1275) imgext=elf ;;
*) imgext=img ;;
esac
@ -569,7 +569,7 @@ esac
"$grub_mkimage" ${config_opt} -d "${pkglibdir}" -O ${mkimage_target} --output="${grubdir}/core.${imgext}" --prefix="${prefix_drive}${relative_grubdir}" $modules || exit 1
# Backward-compatibility kludges
if [ "${target_cpu}-${platform}" = "mips-yeeloong" ]; then
if [ "${target_cpu}-${platform}" = "mips-loongson" ]; then
cp "${grubdir}/core.${imgext}" "${bootdir}"/grub.elf
elif [ "${target_cpu}-${platform}" = "i386-ieee1275" ] || [ "${target_cpu}-${platform}" = "powerpc-ieee1275" ]; then
cp "${grubdir}/core.${imgext}" "${grubdir}/grub"

199
util/grub-mkimage.c
View File

@ -58,14 +58,15 @@ typedef enum {
struct image_target_desc
{
const char *name;
const char *dirname;
const char *names[6];
grub_size_t voidp_sizeof;
int bigendian;
enum {
IMAGE_I386_PC, IMAGE_EFI, IMAGE_COREBOOT,
IMAGE_SPARC64_AOUT, IMAGE_SPARC64_RAW, IMAGE_I386_IEEE1275,
IMAGE_YEELOONG_ELF, IMAGE_QEMU, IMAGE_PPC, IMAGE_YEELOONG_FLASH,
IMAGE_I386_PC_PXE, IMAGE_MIPS_ARC
IMAGE_LOONGSON_ELF, IMAGE_QEMU, IMAGE_PPC, IMAGE_YEELOONG_FLASH,
IMAGE_FULOONG_FLASH, IMAGE_I386_PC_PXE, IMAGE_MIPS_ARC
} id;
enum
{
@ -92,7 +93,8 @@ struct image_target_desc
struct image_target_desc image_targets[] =
{
{
.name = "i386-coreboot",
.dirname = "i386-coreboot",
.names = { "i386-coreboot", NULL },
.voidp_sizeof = 4,
.bigendian = 0,
.id = IMAGE_COREBOOT,
@ -114,7 +116,8 @@ struct image_target_desc image_targets[] =
.mod_align = GRUB_KERNEL_I386_COREBOOT_MOD_ALIGN
},
{
.name = "i386-multiboot",
.dirname = "i386-multiboot",
.names = { "i386-multiboot", NULL},
.voidp_sizeof = 4,
.bigendian = 0,
.id = IMAGE_COREBOOT,
@ -136,7 +139,8 @@ struct image_target_desc image_targets[] =
.mod_align = GRUB_KERNEL_I386_COREBOOT_MOD_ALIGN
},
{
.name = "i386-pc",
.dirname = "i386-pc",
.names = { "i386-pc", NULL },
.voidp_sizeof = 4,
.bigendian = 0,
.id = IMAGE_I386_PC,
@ -154,7 +158,8 @@ struct image_target_desc image_targets[] =
.link_addr = GRUB_KERNEL_I386_PC_LINK_ADDR
},
{
.name = "i386-pc-pxe",
.dirname = "i386-pc",
.names = { "i386-pc-pxe", NULL },
.voidp_sizeof = 4,
.bigendian = 0,
.id = IMAGE_I386_PC_PXE,
@ -172,7 +177,8 @@ struct image_target_desc image_targets[] =
.link_addr = GRUB_KERNEL_I386_PC_LINK_ADDR
},
{
.name = "i386-efi",
.dirname = "i386-efi",
.names = { "i386-efi", NULL },
.voidp_sizeof = 4,
.bigendian = 0,
.id = IMAGE_EFI,
@ -194,7 +200,8 @@ struct image_target_desc image_targets[] =
.install_bsd_part = TARGET_NO_FIELD,
},
{
.name = "i386-ieee1275",
.dirname = "i386-ieee1275",
.names = { "i386-ieee1275", NULL },
.voidp_sizeof = 4,
.bigendian = 0,
.id = IMAGE_I386_IEEE1275,
@ -216,7 +223,8 @@ struct image_target_desc image_targets[] =
.link_align = 4,
},
{
.name = "i386-qemu",
.dirname = "i386-qemu",
.names = { "i386-qemu", NULL },
.voidp_sizeof = 4,
.bigendian = 0,
.id = IMAGE_QEMU,
@ -234,7 +242,8 @@ struct image_target_desc image_targets[] =
.link_addr = GRUB_KERNEL_I386_QEMU_LINK_ADDR
},
{
.name = "x86_64-efi",
.dirname = "x86_64-efi",
.names = { "x86_64-efi", NULL },
.voidp_sizeof = 8,
.bigendian = 0,
.id = IMAGE_EFI,
@ -256,49 +265,75 @@ struct image_target_desc image_targets[] =
.install_bsd_part = TARGET_NO_FIELD,
},
{
.name = "mipsel-yeeloong-flash",
.dirname = "mips-loongson",
.names = { "mipsel-yeeloong-flash", NULL },
.voidp_sizeof = 4,
.bigendian = 0,
.id = IMAGE_YEELOONG_FLASH,
.flags = PLATFORM_FLAGS_DECOMPRESSORS,
.prefix = GRUB_KERNEL_MIPS_YEELOONG_PREFIX,
.prefix_end = GRUB_KERNEL_MIPS_YEELOONG_PREFIX_END,
.prefix = GRUB_KERNEL_MIPS_LOONGSON_PREFIX,
.prefix_end = GRUB_KERNEL_MIPS_LOONGSON_PREFIX_END,
.raw_size = 0,
.total_module_size = GRUB_KERNEL_MIPS_YEELOONG_TOTAL_MODULE_SIZE,
.total_module_size = GRUB_KERNEL_MIPS_LOONGSON_TOTAL_MODULE_SIZE,
.compressed_size = TARGET_NO_FIELD,
.kernel_image_size = TARGET_NO_FIELD,
.section_align = 1,
.vaddr_offset = 0,
.install_dos_part = TARGET_NO_FIELD,
.install_bsd_part = TARGET_NO_FIELD,
.link_addr = GRUB_KERNEL_MIPS_YEELOONG_LINK_ADDR,
.link_addr = GRUB_KERNEL_MIPS_LOONGSON_LINK_ADDR,
.elf_target = EM_MIPS,
.link_align = GRUB_KERNEL_MIPS_YEELOONG_LINK_ALIGN,
.link_align = GRUB_KERNEL_MIPS_LOONGSON_LINK_ALIGN,
.default_compression = COMPRESSION_NONE
},
{
.name = "mipsel-yeeloong-elf",
.dirname = "mips-loongson",
.names = { "mipsel-fuloong-flash", NULL },
.voidp_sizeof = 4,
.bigendian = 0,
.id = IMAGE_YEELOONG_ELF,
.id = IMAGE_FULOONG_FLASH,
.flags = PLATFORM_FLAGS_DECOMPRESSORS,
.prefix = GRUB_KERNEL_MIPS_YEELOONG_PREFIX,
.prefix_end = GRUB_KERNEL_MIPS_YEELOONG_PREFIX_END,
.prefix = GRUB_KERNEL_MIPS_LOONGSON_PREFIX,
.prefix_end = GRUB_KERNEL_MIPS_LOONGSON_PREFIX_END,
.raw_size = 0,
.total_module_size = GRUB_KERNEL_MIPS_YEELOONG_TOTAL_MODULE_SIZE,
.total_module_size = GRUB_KERNEL_MIPS_LOONGSON_TOTAL_MODULE_SIZE,
.compressed_size = TARGET_NO_FIELD,
.kernel_image_size = TARGET_NO_FIELD,
.section_align = 1,
.vaddr_offset = 0,
.install_dos_part = TARGET_NO_FIELD,
.install_bsd_part = TARGET_NO_FIELD,
.link_addr = GRUB_KERNEL_MIPS_YEELOONG_LINK_ADDR,
.link_addr = GRUB_KERNEL_MIPS_LOONGSON_LINK_ADDR,
.elf_target = EM_MIPS,
.link_align = GRUB_KERNEL_MIPS_YEELOONG_LINK_ALIGN,
.link_align = GRUB_KERNEL_MIPS_LOONGSON_LINK_ALIGN,
.default_compression = COMPRESSION_NONE
},
{
.name = "powerpc-ieee1275",
.dirname = "mips-loongson",
.names = { "mipsel-loongson-elf", "mipsel-yeeloong-elf",
"mipsel-fuloong-elf", NULL },
.voidp_sizeof = 4,
.bigendian = 0,
.id = IMAGE_LOONGSON_ELF,
.flags = PLATFORM_FLAGS_DECOMPRESSORS,
.prefix = GRUB_KERNEL_MIPS_LOONGSON_PREFIX,
.prefix_end = GRUB_KERNEL_MIPS_LOONGSON_PREFIX_END,
.raw_size = 0,
.total_module_size = GRUB_KERNEL_MIPS_LOONGSON_TOTAL_MODULE_SIZE,
.compressed_size = TARGET_NO_FIELD,
.kernel_image_size = TARGET_NO_FIELD,
.section_align = 1,
.vaddr_offset = 0,
.install_dos_part = TARGET_NO_FIELD,
.install_bsd_part = TARGET_NO_FIELD,
.link_addr = GRUB_KERNEL_MIPS_LOONGSON_LINK_ADDR,
.elf_target = EM_MIPS,
.link_align = GRUB_KERNEL_MIPS_LOONGSON_LINK_ALIGN,
.default_compression = COMPRESSION_NONE
},
{
.dirname = "powerpc-ieee1275",
.names = { "powerpc-ieee1275", NULL },
.voidp_sizeof = 4,
.bigendian = 1,
.id = IMAGE_PPC,
@ -320,7 +355,8 @@ struct image_target_desc image_targets[] =
.link_align = 4
},
{
.name = "sparc64-ieee1275-raw",
.dirname = "sparc64-ieee1275",
.names = { "sparc64-ieee1275-raw", NULL },
.voidp_sizeof = 8,
.bigendian = 1,
.id = IMAGE_SPARC64_RAW,
@ -338,7 +374,8 @@ struct image_target_desc image_targets[] =
.link_addr = GRUB_KERNEL_SPARC64_IEEE1275_LINK_ADDR
},
{
.name = "sparc64-ieee1275-aout",
.dirname = "sparc64-ieee1275",
.names = { "sparc64-ieee1275-aout", NULL },
.voidp_sizeof = 8,
.bigendian = 1,
.id = IMAGE_SPARC64_AOUT,
@ -356,7 +393,8 @@ struct image_target_desc image_targets[] =
.link_addr = GRUB_KERNEL_SPARC64_IEEE1275_LINK_ADDR
},
{
.name = "mips-arc",
.dirname = "mips-arc",
.names = {"mips-arc", NULL},
.voidp_sizeof = 4,
.bigendian = 1,
.id = IMAGE_MIPS_ARC,
@ -821,10 +859,10 @@ generate_image (const char *dir, char *prefix, FILE *out, char *mods[],
decompress_size = grub_util_get_image_size (decompress_path);
decompress_img = grub_util_read_image (decompress_path);
*((grub_uint32_t *) (decompress_img + GRUB_KERNEL_MIPS_YEELOONG_COMPRESSED_SIZE))
*((grub_uint32_t *) (decompress_img + GRUB_KERNEL_MIPS_LOONGSON_COMPRESSED_SIZE))
= grub_host_to_target32 (core_size);
*((grub_uint32_t *) (decompress_img + GRUB_KERNEL_MIPS_YEELOONG_UNCOMPRESSED_SIZE))
*((grub_uint32_t *) (decompress_img + GRUB_KERNEL_MIPS_LOONGSON_UNCOMPRESSED_SIZE))
= grub_host_to_target32 (kernel_size + total_module_size);
full_size = core_size + decompress_size;
@ -1184,29 +1222,48 @@ generate_image (const char *dir, char *prefix, FILE *out, char *mods[],
}
break;
case IMAGE_YEELOONG_FLASH:
case IMAGE_FULOONG_FLASH:
{
char *rom_img;
size_t rom_size;
char *boot_path, *boot_img;
size_t boot_size;
grub_uint8_t context[GRUB_MD_SHA512->contextsize];
/* fwstart.img is the only part which can't be testes by using *-elf
target. Check it against the checksum. This checksum is obtained with
sha512sum utility after compiling on Gnewsense.
*/
const grub_uint8_t fwstart_good_hash[] =
{
0x9f, 0x7f, 0x79, 0x47, 0x68, 0x91, 0x61, 0xb3,
0x16, 0x7b, 0xf0, 0x27, 0x1c, 0xf7, 0xaf, 0x05,
0x6c, 0xc1, 0x6f, 0xd2, 0xe7, 0xd1, 0xe9, 0xec,
0x08, 0x87, 0xe5, 0xc8, 0x29, 0xa2, 0x5b, 0x84,
0xf8, 0xa6, 0xec, 0x08, 0xf7, 0xcb, 0x7b, 0x6c,
0xfe, 0x01, 0xfd, 0x5d, 0xba, 0xbf, 0x0d, 0x0f,
0x2e, 0xef, 0xed, 0x7b, 0xfe, 0xc9, 0x4a, 0x85,
0xcf, 0xac, 0x20, 0xd7, 0x01, 0xc5, 0xc5, 0x9c
/* fwstart.img is the only part which can't be tested by using *-elf
target. Check it against the checksum. */
const grub_uint8_t yeeloong_fwstart_good_hash[512 / 8] =
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
/* None yet. */
const grub_uint8_t fuloong_fwstart_good_hash[512 / 8] =
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
boot_path = grub_util_get_path (dir, "fwstart.img");
const grub_uint8_t *fwstart_good_hash;
if (image_target->id == IMAGE_FULOONG_FLASH)
{
fwstart_good_hash = fuloong_fwstart_good_hash;
boot_path = grub_util_get_path (dir, "fwstart_fuloong.img");
}
else
{
fwstart_good_hash = yeeloong_fwstart_good_hash;
boot_path = grub_util_get_path (dir, "fwstart.img");
}
boot_size = grub_util_get_image_size (boot_path);
boot_img = grub_util_read_image (boot_path);
@ -1308,7 +1365,7 @@ generate_image (const char *dir, char *prefix, FILE *out, char *mods[],
core_size = program_size + sizeof (*head) + sizeof (*section);
}
break;
case IMAGE_YEELOONG_ELF:
case IMAGE_LOONGSON_ELF:
case IMAGE_PPC:
case IMAGE_COREBOOT:
case IMAGE_I386_IEEE1275:
@ -1321,7 +1378,7 @@ generate_image (const char *dir, char *prefix, FILE *out, char *mods[],
int header_size, footer_size = 0;
int phnum = 1;
if (image_target->id != IMAGE_YEELOONG_ELF)
if (image_target->id != IMAGE_LOONGSON_ELF)
phnum += 2;
if (note)
@ -1356,7 +1413,7 @@ generate_image (const char *dir, char *prefix, FILE *out, char *mods[],
/* No section headers. */
ehdr->e_shoff = grub_host_to_target32 (0);
if (image_target->id == IMAGE_YEELOONG_ELF)
if (image_target->id == IMAGE_LOONGSON_ELF)
ehdr->e_shentsize = grub_host_to_target16 (0);
else
ehdr->e_shentsize = grub_host_to_target16 (sizeof (Elf32_Shdr));
@ -1369,7 +1426,7 @@ generate_image (const char *dir, char *prefix, FILE *out, char *mods[],
phdr->p_offset = grub_host_to_target32 (header_size);
phdr->p_flags = grub_host_to_target32 (PF_R | PF_W | PF_X);
if (image_target->id == IMAGE_YEELOONG_ELF)
if (image_target->id == IMAGE_LOONGSON_ELF)
target_addr = ALIGN_UP (image_target->link_addr
+ kernel_size + total_module_size, 32);
else
@ -1378,12 +1435,12 @@ generate_image (const char *dir, char *prefix, FILE *out, char *mods[],
phdr->p_vaddr = grub_host_to_target32 (target_addr);
phdr->p_paddr = grub_host_to_target32 (target_addr);
phdr->p_align = grub_host_to_target32 (align > image_target->link_align ? align : image_target->link_align);
if (image_target->id == IMAGE_YEELOONG_ELF)
if (image_target->id == IMAGE_LOONGSON_ELF)
ehdr->e_flags = grub_host_to_target32 (0x1000 | EF_MIPS_NOREORDER
| EF_MIPS_PIC | EF_MIPS_CPIC);
else
ehdr->e_flags = 0;
if (image_target->id == IMAGE_YEELOONG_ELF)
if (image_target->id == IMAGE_LOONGSON_ELF)
{
phdr->p_filesz = grub_host_to_target32 (core_size);
phdr->p_memsz = grub_host_to_target32 (core_size);
@ -1498,12 +1555,12 @@ usage (int status)
char *ptr;
unsigned i;
for (i = 0; i < ARRAY_SIZE (image_targets); i++)
format_len += strlen (image_targets[i].name) + 2;
format_len += strlen (image_targets[i].names[0]) + 2;
ptr = formats = xmalloc (format_len);
for (i = 0; i < ARRAY_SIZE (image_targets); i++)
{
strcpy (ptr, image_targets[i].name);
ptr += strlen (image_targets[i].name);
strcpy (ptr, image_targets[i].names[0]);
ptr += strlen (image_targets[i].names[0]);
*ptr++ = ',';
*ptr++ = ' ';
}
@ -1573,10 +1630,12 @@ main (int argc, char *argv[])
case 'O':
{
unsigned i;
unsigned i, j;
for (i = 0; i < ARRAY_SIZE (image_targets); i++)
if (strcmp (optarg, image_targets[i].name) == 0)
image_target = &image_targets[i];
for (j = 0; image_targets[i].names[j]
&& j < ARRAY_SIZE (image_targets[i].names); j++)
if (strcmp (optarg, image_targets[i].names[j]) == 0)
image_target = &image_targets[i];
if (!image_target)
{
printf ("unknown target format %s\n", optarg);
@ -1671,29 +1730,11 @@ main (int argc, char *argv[])
if (!dir)
{
const char *last;
last = strchr (image_target->name, '-');
if (last)
last = strchr (last + 1, '-');
if (!last)
last = image_target->name + strlen (image_target->name);
dir = xmalloc (sizeof (GRUB_PKGLIBROOTDIR) + (last - image_target->name)
+ 1);
dir = xmalloc (sizeof (GRUB_PKGLIBROOTDIR)
+ grub_strlen (image_target->dirname) + 1);
memcpy (dir, GRUB_PKGLIBROOTDIR, sizeof (GRUB_PKGLIBROOTDIR) - 1);
*(dir + sizeof (GRUB_PKGLIBROOTDIR) - 1) = '/';
if (strncmp (image_target->name, "mipsel-yeeloong",
last - image_target->name) == 0)
{
memcpy (dir + sizeof (GRUB_PKGLIBROOTDIR), "mips-yeeloong",
sizeof ("mips-yeeloong"));
}
else
{
memcpy (dir + sizeof (GRUB_PKGLIBROOTDIR), image_target->name,
last - image_target->name);
*(dir + sizeof (GRUB_PKGLIBROOTDIR) + (last - image_target->name))
= 0;
}
strcpy (dir + sizeof (GRUB_PKGLIBROOTDIR), image_target->dirname);
}
generate_image (dir, prefix ? : DEFAULT_DIRECTORY, fp,

44
util/grub-pe2elf.c
View File

@ -79,11 +79,12 @@ Report bugs to <%s>.\n", program_name, PACKAGE_BUGREPORT);
#define BSS_SECTION 4
#define MODNAME_SECTION 5
#define MODDEPS_SECTION 6
#define SYMTAB_SECTION 7
#define STRTAB_SECTION 8
#define MODLICENSE_SECTION 7
#define SYMTAB_SECTION 8
#define STRTAB_SECTION 9
#define REL_SECTION 9
#define MAX_SECTIONS 12
#define REL_SECTION 10
#define MAX_SECTIONS 16
#define STRTAB_BLOCK 256
@ -96,7 +97,7 @@ int num_sections;
grub_uint32_t offset;
static int
insert_string (char *name)
insert_string (const char *name)
{
int len, result;
@ -124,6 +125,8 @@ write_section_data (FILE* fp, char *image,
{
int *section_map;
int i;
char *pe_strtab = (image + pe_chdr->symtab_offset
+ pe_chdr->num_symbols * sizeof (struct grub_pe32_symbol));
section_map = xmalloc ((pe_chdr->num_sections + 1) * sizeof (int));
section_map[0] = 0;
@ -131,31 +134,42 @@ write_section_data (FILE* fp, char *image,
for (i = 0; i < pe_chdr->num_sections; i++, pe_shdr++)
{
grub_uint32_t idx;
const char *name = pe_shdr->name;
if (! strcmp (pe_shdr->name, ".text"))
if (name[0] == '/' && isdigit (name[1]))
{
char t[sizeof (pe_shdr->name) + 1];
memcpy (t, name, sizeof (pe_shdr->name));
t[sizeof (pe_shdr->name)] = 0;
name = pe_strtab + atoi (t + 1);
}
if (! strcmp (name, ".text"))
{
idx = TEXT_SECTION;
shdr[idx].sh_flags = SHF_ALLOC | SHF_EXECINSTR;
}
else if (! strcmp (pe_shdr->name, ".rdata"))
else if (! strcmp (name, ".rdata"))
{
idx = RDATA_SECTION;
shdr[idx].sh_flags = SHF_ALLOC;
}
else if (! strcmp (pe_shdr->name, ".data"))
else if (! strcmp (name, ".data"))
{
idx = DATA_SECTION;
shdr[idx].sh_flags = SHF_ALLOC | SHF_WRITE;
}
else if (! strcmp (pe_shdr->name, ".bss"))
else if (! strcmp (name, ".bss"))
{
idx = BSS_SECTION;
shdr[idx].sh_flags = SHF_ALLOC | SHF_WRITE;
}
else if (! strcmp (pe_shdr->name, ".modname"))
else if (! strcmp (name, ".modname"))
idx = MODNAME_SECTION;
else if (! strcmp (pe_shdr->name, ".moddeps"))
else if (! strcmp (name, ".moddeps"))
idx = MODDEPS_SECTION;
else if (strcmp (name, ".module_license") == 0)
idx = MODLICENSE_SECTION;
else
{
section_map[i + 1] = -1;
@ -181,14 +195,14 @@ write_section_data (FILE* fp, char *image,
if (pe_shdr->relocations_offset)
{
char name[5 + strlen (pe_shdr->name)];
char relname[5 + strlen (name)];
if (num_sections >= MAX_SECTIONS)
grub_util_error ("too many sections");
sprintf (name, ".rel%s", pe_shdr->name);
sprintf (relname, ".rel%s", name);
shdr[num_sections].sh_name = insert_string (name);
shdr[num_sections].sh_name = insert_string (relname);
shdr[num_sections].sh_link = i;
shdr[num_sections].sh_info = idx;
@ -197,7 +211,7 @@ write_section_data (FILE* fp, char *image,
num_sections++;
}
else
shdr[idx].sh_name = insert_string (pe_shdr->name);
shdr[idx].sh_name = insert_string (name);
}
return section_map;

4
util/grub.d/10_linux.in
View File

@ -98,6 +98,10 @@ EOF
EOF
fi
cat << EOF
insmod gzio
EOF
if [ x$dirname = x/ ]; then
if [ -z "${prepare_root_cache}" ]; then
prepare_root_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE} | sed -e "s/^/\t/")"