* kern/file.c (grub_file_seek): Seeking to an offset equal to a
file size must be permitted.
* kern/i386/pc/startup.S (multiboot_trampoline): Fix a mistake
between %ah and %al.
Make GRUB's kernel compliant to Multiboot Specification.
* kern/i386/pc/startup.S (multiboot_header): New label.
(multiboot_entry): Likewise.
(multiboot_trampoline): Likewise.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_RAW_SIZE):
Increased to 0x4A0.
* fs/xfs.c (grub_xfs_iterate_dir): Fix a syntax error. You may not
put parentheses after a question mark.
[!GRUB_UTIL] (my_mod): New variable.
* util/grub-emu.c (main): Call grub_xfs_init and grub_xfs_fini.
* kern/i386/pc/startup.S (gate_a20_try_system_control_port_a):
When turning off Gate A20, skip the check and return immediately,
because this is not fatal usually.
* conf/i386-pc.rmk (pxeboot_img_LDFLAGS): The text address should
be 0x7C00 instead of 0x8000.
* boot/i386/pc/pxeboot.S: Rewritten.
* kern/i386/pc/startup.S (gate_a20_try_bios): No need to specify
EXT_C.
(gate_a20_check_state): Read a byte from 0x108000. Invert the
result.
* kern/i386/pc/startup.S (grub_gate_a20): Rewritten for
robustness. This routine now supports a BIOS call and System
Control Port A to modify the gate A20.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_RAW_SIZE):
Increased to 0x440.
All symbols prefixed with PUPA_ and pupa_ are renamed to GRUB_
and grub_, respectively. Because the conversion is trivial and
mechanical, I omit the details here. Please refer to the CVS
if you need more information.
* disk/i386/pc/biosdisk.c (pupa_biosdisk_open): Correctly check
for available extensions.
* include/pupa/i386/pc/time.h: New file.
* kern/disk.c: Include <pupa/machine/time.h>.
(PUPA_CACHE_TIMEOUT): New macro.
(pupa_last_time): New variable.
(pupa_disk_open): Flush the cache when there was a timeout.
(pupa_disk_close): Reset the timer.
* kern/i386/pc/startup.S (pupa_get_rtc): Renamed from
pupa_currticks.
* util/misc.c: Include <sys/times.h>
(pupa_get_rtc): New function.
I forgot to check in these changes for a long time. This adds
incomplete support for VGA console, and this is still very
buggy. Also, a lot of consideration is required for I18N,
UNICODE, and VGA font issues. Therefore, assume that this is
such that "better than nothing".
* font/manager.c: New file.
* include/pupa/font.h: Likewise.
* include/pupa/i386/pc/vga.h: Likewise.
* term/i386/pc/vga.c: Likewise.
* util/unifont2pff.rb: Likewise.
* conf/i386-pc.rmk (kernel_img_HEADERS): Added machine/vga.h.
(pkgdata_MODULES): Added vga.mod and font.mod.
(vga_mod_SOURCES): New variables.
(vga_mod_CFLAGS): Likewise.
(font_mod_SOURCES): Likewise.
(font_mod_CFLAGS): Likewise.
* include/pupa/err.h (PUPA_ERR_BAD_FONT): New constant.
* include/pupa/term.h: Include pupa/err.h.
(struct pupa_term): Added init and fini.
Changed the argument of putchar to pupa_uint32_t.
* include/pupa/i386/pc/console.h: Include pupa/symbol.h.
(pupa_console_real_putchar): New prototype.
(pupa_console_putchar): Removed.
(pupa_console_checkkey): Exported.
(pupa_console_getkey): Likewise.
* kern/misc.c (pupa_vsprintf): Add support for UNICODE
characters.
* kern/term.c (pupa_term_set_current): Rewritten.
(pupa_putchar): Likewise.
(pupa_putcode): New function.
* kern/i386/pc/startup.S (pupa_console_putchar): Renamed to ...
(pupa_console_real_putchar): ... this.
(pupa_vga_set_mode): New function.
(pupa_vga_get_font): Likewise.
* normal/command.c: Include pupa/term.h.
(terminal_command): New function.
(pupa_command_init): Register the command "terminal".
* normal/menu.c (DISP_LEFT): Changed to a UNICODE value.
(DISP_UP): Likewise.
(DISP_RIGHT): Likewise.
(DISP_DOWN): Likewise.
(DISP_HLINE): Likewise.
(DISP_VLINE): Likewise.
(DISP_UL): Likewise.
(DISP_UR): Likewise.
(DISP_LL): Likewise.
(DISP_LR): Likewise.
* term/i386/pc/console.c (pupa_console_putchar): New function.
* kern/i386/pc/lzo1x.S: New file.
* util/i386/pc/pupa-mkimage.c: Include lzo1x.h.
(compress_kernel): New variable.
(generate_image): Heavily modified to support compressing a
large part of the core image.
* util/misc.c (pupa_util_read_image): Fix a file descriptor
leak.
(pupa_util_load_image): New function.
* kern/i386/pc/startup.S: Include pupa/machine/kernel.h.
(pupa_compressed_size): New variable.
(codestart): Enable Gate A20 here.
Decompress the compressed part of the core image.
Rearrange the code to put functions and variables which are
required for initialization in the non-compressed part.
Include lzo1x.S.
* kern/i386/pc/init.c (pupa_machine_init): Don't enable Gate A20
here.
* include/pupa/util/misc.h (pupa_util_write_image): Declared.
* include/pupa/i386/pc/kernel.h
(PUPA_KERNEL_MACHINE_COMPRESSED_SIZE): New macro.
(PUPA_KERNEL_MACHINE_INSTALL_DOS_PART): Increased by 4.
(PUPA_KERNEL_MACHINE_INSTALL_BSD_PART): Likewise.
(PUPA_KERNEL_MACHINE_PREFIX): Likewise.
(PUPA_KERNEL_MACHINE_RAW_SIZE): New macro.
* conf/i386-pc.rmk (pupa_mkimage_LDFLAGS): New variable.
* genmk.rb (Image#rule): Put LDFLAGS at the end of a line.
(Utility#rule): Likewise.
* configure.ac: Check if LZO is available.
* include/pupa/normal.h: New file.
* include/pupa/setjmp.h: Likewise.
* include/pupa/i386/setjmp.h: Likewise.
* normal/cmdline.c: Likewise.
* normal/command.c: Likewise.
* normal/main.c: Likewise.
* normal/menu.c: Likewise.
* normal/i386/setjmp.S: Likewise.
* loader/i386/pc/linux.c (pupa_rescue_cmd_linux): Made global.
(pupa_rescue_cmd_initrd): Likewise.
* loader/i386/pc/chainloader.c (pupa_rescue_cmd_chainloader):
Likewise.
* kern/i386/pc/startup.S (translation_table): New variable.
(translate_keycode): New function.
(pupa_console_getkey): Call translate_keycode.
* kern/rescue.c (attempt_normal_mode): New function.
(pupa_enter_rescue_mode): Attempt to execute the normal mode. If
it failed, print a message.
* kern/mm.c (pupa_real_malloc): Print more information when a
free magic is broken.
(pupa_free): If the first free header is not free actually, set
it to P.
* kern/main.c (pupa_load_normal_mode): Just load the module
"normal".
(pupa_main): Don't print the message
"Entering into rescue mode..." here.
* include/pupa/i386/pc/loader.h (pupa_rescue_cmd_initrd):
Declared.
(pupa_rescue_cmd_initrd): Likewise.
(pupa_rescue_cmd_initrd): Likewise.
* include/pupa/symbol.h (FUNCTION): Specify the type.
(VARIABLE): Likewise.
* include/pupa/err.h (pupa_err_t): Added
PUPA_ERR_UNKNOWN_COMMAND.
* include/pupa/dl.h (pupa_dl_set_prefix): Exported.
(pupa_dl_get_prefix): Likewise.
* conf/i386-pc.rmk (pkgdata_MODULES): Added normal.mod.
Added _chain.mod and _linux.mod instead of chain.mod and
linux.mod.
(chain_mod_SOURCES): Renamed to ...
(_chain_mod_SOURCES): ... this.
(chain_mod_CFLAGS): Renamed to ...
(_chain_mod_CFLAGS): ... this.
(linux_mod_SOURCES): Renamed to ...
(_linux_mod_SOURCES): ... this.
(linux_mod_CFLAGS): Renamed to ...
(_linux_mod_CFLAGS): ... this.
(normal_mod_SOURCES): New variable.
(normal_mod_CFLAGS): Likewise.
(normal_mod_ASFLAGS): Likewise.
2003-01-18 Yoshinori K. Okuji <okuji@enbug.org>
* kern/rescue.c (pupa_rescue_cmd_rmmod): Call pupa_dl_unload, if
possible.
* kern/dl.c (pupa_dl_ref): Refer dependending modules
recursively.
(pupa_dl_unref): Unrefer depending modules recursively.
Don't call pupa_dl_unload implicitly, because PUPA can crash if
a module is unloaded before one depending on that module is
unloaded.
(pupa_dl_unload): Unload depending modules explicitly,
if possible.
* include/pupa/i386/pc/linux.h: New file.
* loader/i386/pc/linux.c: Likewise.
* loader/i386/pc/chainloader.c (pupa_chainloader_boot_sector):
Removed.
(pupa_chainloader_unload): Return PUPA_ERR_NONE.
(pupa_rescue_cmd_chainloader): Read the image to 0x7C00 instead
of PUPA_CHAINLOADER_BOOT_SECTOR.
* kern/i386/pc/startup.S: Include pupa/machine/linux.h.
(pupa_linux_prot_size): New variable.
(pupa_linux_tmp_addr): Likewise.
(pupa_linux_real_addr): Likewise.
(pupa_linux_boot_zimage): New function.
(pupa_linux_boot_bzimage): Likewise.
* kern/i386/pc/init.c (struct mem_region): New structure.
(MAX_REGIONS): New macro.
(mem_regions): New variable.
(num_regions): Likewise.
(pupa_os_area_addr): Likewise.
(pupa_os_area_size): Likewise.
(pupa_lower_mem): Likewise.
(pupa_upper_mem): Likewise.
(add_mem_region): New function.
(compact_mem_regions): Likewise.
(pupa_machine_init): Set PUPA_LOWER_MEM and PUPA_UPPER_MEM to
the size of the conventional memory and that of so-called upper
memory (before the first memory hole).
Instead of adding each found region to free memory, use
add_mem_region and add them after removing overlaps.
Also, add only 1/4 of the upper memory to free memory. The rest
is used for loading OS images. Maybe this is ad hoc, but this
makes it much easier to relocate OS images when booting.
* kern/rescue.c (pupa_rescue_cmd_module): Removed.
(pupa_enter_rescue_mode): Don't register initrd and module.
* kern/mm.c: Include pupa/dl.h.
* kern/main.c: Include pupa/file.h and pupa/device.h.
* kern/loader.c (pupa_loader_load_module_func): Removed.
(pupa_loader_load_module): Likewise.
* kern/dl.c (pupa_dl_load): Use the suffix ``.mod'' instead of
``.o''.
* include/pupa/i386/pc/loader.h (pupa_linux_prot_size): Declared.
(pupa_linux_tmp_addr): Likewise.
(pupa_linux_real_addr): Likewise.
(pupa_linux_boot_zimage): Likewise.
(pupa_linux_boot_bzimage): Likewise.
* include/pupa/i386/pc/init.h (pupa_lower_mem): Declared.
(pupa_upper_mem): Likewise.
(pupa_gate_a20): Don't export, because turning off Gate A20 in a
module is too dangerous.
* include/pupa/loader.h (pupa_os_area_addr): Declared.
(pupa_os_area_size): Likewise.
(pupa_loader_set): Remove the first argument. Loader doesn't
manage modules or initrd any longer.
(pupa_loader_load_module): Removed.
* conf/i386-pc.rmk (pkgdata_MODULES): Added linux.mod.
(linux_mod_SOURCES): New variable.
(linux_mod_CFLAGS): Likewise.
* util/i386/pc/pupa-setup.c: Include pupa/machine/kernel.h.
(setup): Configure the installed partition information and the
dl prefix.
* loader/i386/pc/chainloader.c (my_mod): New variable.
(pupa_chainloader_unload): New function.
(pupa_rescue_cmd_chainloader): Refer itself.
(PUPA_MOD_INIT): Save its own module in MY_MOD.
* kern/i386/pc/startup.S (install_partition): Removed.
(version_string): Likewise.
(config_file): Likewise.
(pupa_install_dos_part): New variable.
(pupa_install_bsd_part): Likewise.
(pupa_prefix): Likewise.
(pupa_chainloader_real_boot): Call pupa_dl_unload_all.
* kern/i386/pc/init.c: Include pupa/machine/kernel.h, pupa/dl.h
and pupa/misc.h.
(make_install_device): New function.
(pupa_machine_init): Set the dl prefix.
* kern/rescue.c: Include pupa/rescue.h and pupa/dl.h.
(buf): Renamed to ...
(linebuf): ... this.
(pupa_rescue_cmd_prefix): New function.
(pupa_rescue_cmd_insmod): Likewise.
(pupa_rescue_cmd_rmmod): Likewise.
(pupa_rescue_cmd_lsmod): Likewise.
(pupa_enter_rescue_mode): Register new commands: prefix, insmod,
rmmod and lsmod.
* kern/mm.c (pupa_memalign): If failed even after invalidating
disk caches, unload unneeded modules and retry.
* kern/misc.c (pupa_memmove): New function.
(pupa_memcpy): Removed.
(pupa_strcpy): New function.
(pupa_itoa): Made static.
* kern/dl.c (pupa_dl_iterate): New function.
(pupa_dl_ref): Likewise.
(pupa_dl_unref): Likewise.
(pupa_dl_unload): Return if succeeded or not.
(pupa_dl_unload_unneeded): New function.
(pupa_dl_unload_all): Likewise.
(pupa_dl_init): Renamed to ...
(pupa_dl_set_prefix): ... this.
(pupa_dl_get_prefix): New function.
* include/pupa/i386/pc/kernel.h: Include pupa/types.h.
(PUPA_KERNEL_MACHINE_INSTALL_DOS_PART): New macro.
(PUPA_KERNEL_MACHINE_INSTALL_BSD_PART): Likewise.
(PUPA_KERNEL_MACHINE_PREFIX): Likewise.
(pupa_install_dos_part): Declared.
(pupa_install_bsd_part): Likewise.
(pupa_prefix): Likewise.
(pupa_boot_drive): Likewise.
* include/pupa/types.h: Fix a typo.
* include/pupa/misc.h (pupa_memcpy): New macro. Just an alias to
pupa_memmove.
(pupa_memmove): Declared.
(pupa_strcpy): Likewise.
* include/pupa/dl.h (PUPA_MOD_INIT): Change the prototype. Now
pupa_mod_init takes one argument, its own module.
(pupa_dl_unload_unneeded): Declared.
(pupa_dl_unload_all): Likewise.
(pupa_dl_ref): Likewise.
(pupa_dl_unref): Likewise.
(pupa_dl_iterate): Likewise.
(pupa_dl_init): Renamed to ...
(pupa_dl_set_prefix): ... this.
(pupa_dl_get_prefix): Declared.
* fs/fat.c [!PUPA_UTIL] (my_mod): New variable.
(pupa_fat_dir) [!PUPA_UTIL]: Prevent the fat module from being
unloaded.
(pupa_fat_open) [!PUPA_UTIL]: Refer itself if succeeded.
(pupa_fat_close) [!PUPA_UTIL]: Unrefer itself.
* configure.ac (tmp_CFLAGS): Added -Wshadow, -Wpointer-arith,
-Wmissing-prototypes, -Wundef and -Wstrict-prototypes.
* util/i386/pc/pupa-setup.c (setup): Define the internal
function find_first_partition_start at the top level, because GCC
3.0.x cannot compile internal functions in deeper scopes
correctly.
(find_root_device): Use lstat instead of stat.
Don't follow symbolic links.
Fix the path-constructing code.
* util/i386/pc/biosdisk.c [__linux__] (BLKFLSBUF): New macro.
(pupa_util_biosdisk_open) [__linux__]: Get the size of a device
by a BLKGETSIZE ioctl first, because block devices don't fill
the member st_mode of the structure stat on Linux.
[__linux__] (linux_find_partition): Use a temporary buffer
REAL_DEV for the working space. Copy it to DEV before returning.
(open_device) [__linux__]: Call ioctl with BLKFLSBUF to make the
buffer cache consistent.
(get_os_disk) [__linux__]: Use the length 5 instead of 4 for
strncmp. The previous value was merely wrong.
(pupa_util_biosdisk_get_pupa_dev): Use stat instead of lstat.
* fs/fat.c (pupa_fat_read_data): Shift 4 instead of 12 when the
FAT size is 12. The previous value was merely wrong.
* kern/main.c (pupa_main): Don't split the starting message from
newlines.
* kern/term.c (pupa_putchar): Put CR after LF instead of before
LF, because BIOS goes crazy about character attributes in this
case.
Use -mrtd and -mregparm=3 to reduce the generated code sizes.
This means that any missing prototypes could be fatal. Also, you
must take care when writing assembly code. See the comments at
the beginning of startup.S, for more details.
* kern/i386/pc/startup.S (pupa_halt): Modified for the new
compilation mechanism.
(pupa_chainloader_real_boot): Likewise.
(pupa_biosdisk_rw_int13_extensions): Likewise.
(pupa_biosdisk_rw_standard): Likewise.
(pupa_biosdisk_check_int13_extensions): Likewise.
(pupa_biosdisk_get_diskinfo_int13_extensions): Likewise.
(pupa_biosdisk_get_diskinfo_standard): Likewise.
(pupa_get_memsize): Likewise.
(pupa_get_mmap_entry): Likewise.
(pupa_console_putchar): Likewise.
(pupa_console_setcursor): Likewise.
(pupa_getrtsecs): Use pushl instead of push.
* kern/i386/pc/init.c (pupa_machine_init): Use the scratch
memory instead of the stack for a mmap entry, because some
BIOSes may ignore the maximum size and overflow.
* conf/i386-pc.rmk (COMMON_CFLAGS): Added -mrtd and -mregparm=3.
* genmk.rb (PModule#rule): Compile automatically generated
sources with module-specific CFLAGS as well as other sources.
