This modifies most of the places we do some form of:
X = malloc(Y * Z);
to use calloc(Y, Z) instead.
Among other issues, this fixes:
- allocation of integer overflow in grub_png_decode_image_header()
reported by Chris Coulson,
- allocation of integer overflow in luks_recover_key()
reported by Chris Coulson,
- allocation of integer overflow in grub_lvm_detect()
reported by Chris Coulson.
Fixes: CVE-2020-14308
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
XSM is enabled by adding "flask=enforcing" as a Xen command line
argument, and providing the policy file as a grub module.
We make entries for both with and without XSM. If XSM is not compiled
into Xen, then there are no policy files, so no change to the boot
options.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
file_is_not_sym() currently only checks for xen-syms. Extend it to
disregard xenpolicy (XSM policy files) and files ending .config (which
are built by the Xen upstream build system in some configurations and
can therefore end up in /boot).
Rename the function accordingly, to file_is_not_xen_garbage().
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The fwsetup command allows to reboot into the EFI firmware setup menu, add
a template to include a menu entry on EFI systems that makes use of that
command to reboot into the EFI firmware settings.
This is useful for users since the hotkey to enter into the EFI setup menu
may not be the same on all systems so users can use the menu entry without
needing to figure out what key needs to be pressed.
Also, if fastboot is enabled in the BIOS then often it is not possible to
enter the firmware setup menu. So the entry is again useful for this case.
Signed-off-by: Steve Langasek <steve.langasek@ubuntu.com>
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently, an image generated with 'grub-mkimage -n' causes an error when
read with 'readelf -a':
Displaying notes found at file offset 0x000106f0 with length 0x0000002c:
Owner Data size Description
readelf: Warning: note with invalid namesz and/or descsz found at offset 0x0
readelf: Warning: type: 0x1275, namesize: 0x00000008, descsize: 0x0000002c, alignment: 4
This is because the descsz of the CHRP note is set to
sizeof (struct grub_ieee1275_note)
which is the size of the entire note, including name and elf header. The
desczs should contain only the contents, not the name and header sizes.
Set the descsz instead to 'sizeof (struct grub_ieee1275_note_desc)'
Resultant readelf output:
Displaying notes found at file offset 0x00010710 with length 0x0000002c:
Owner Data size Description
PowerPC 0x00000018 Unknown note type: (0x00001275)
description data: ff ff ff ff 00 c0 00 00 ff ff ff ff ff ff ff ff ff ff ff ff 00 00 40 00
So far as I can tell this issue has existed for as long as the note
generation code has existed, but I guess nothing really checks descsz.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently the string functions grub_strtol(), grub_strtoul(), and
grub_strtoull() don't declare the "end" pointer in such a way as to
require the pointer itself or the character array to be immutable to the
implementation, nor does the C standard do so in its similar functions,
though it does require us not to change any of it.
The typical declarations of these functions follow this pattern:
long
strtol(const char * restrict nptr, char ** restrict endptr, int base);
Much of the reason for this is historic, and a discussion of that
follows below, after the explanation of this change. (GRUB currently
does not include the "restrict" qualifiers, and we name the arguments a
bit differently.)
The implementation is semantically required to treat the character array
as immutable, but such accidental modifications aren't stopped by the
compiler, and the semantics for both the callers and the implementation
of these functions are sometimes also helped by adding that requirement.
This patch changes these declarations to follow this pattern instead:
long
strtol(const char * restrict nptr,
const char ** const restrict endptr,
int base);
This means that if any modification to these functions accidentally
introduces either an errant modification to the underlying character
array, or an accidental assignment to endptr rather than *endptr, the
compiler should generate an error. (The two uses of "restrict" in this
case basically mean strtol() isn't allowed to modify the character array
by going through *endptr, and endptr isn't allowed to point inside the
array.)
It also means the typical use case changes to:
char *s = ...;
const char *end;
long l;
l = strtol(s, &end, 10);
Or even:
const char *p = str;
while (p && *p) {
long l = strtol(p, &p, 10);
...
}
This fixes 26 places where we discard our attempts at treating the data
safely by doing:
const char *p = str;
long l;
l = strtol(p, (char **)&ptr, 10);
It also adds 5 places where we do:
char *p = str;
while (p && *p) {
long l = strtol(p, (const char ** const)&p, 10);
...
/* more calls that need p not to be pointer-to-const */
}
While moderately distasteful, this is a better problem to have.
With one minor exception, I have tested that all of this compiles
without relevant warnings or errors, and that /much/ of it behaves
correctly, with gcc 9 using 'gcc -W -Wall -Wextra'. The one exception
is the changes in grub-core/osdep/aros/hostdisk.c , which I have no idea
how to build.
Because the C standard defined type-qualifiers in a way that can be
confusing, in the past there's been a slow but fairly regular stream of
churn within our patches, which add and remove the const qualifier in many
of the users of these functions. This change should help avoid that in
the future, and in order to help ensure this, I've added an explanation
in misc.h so that when someone does get a compiler warning about a type
error, they have the fix at hand.
The reason we don't have "const" in these calls in the standard is
purely anachronistic: C78 (de facto) did not have type qualifiers in the
syntax, and the "const" type qualifier was added for C89 (I think; it
may have been later). strtol() appears to date from 4.3BSD in 1986,
which means it could not be added to those functions in the standard
without breaking compatibility, which is usually avoided.
The syntax chosen for type qualifiers is what has led to the churn
regarding usage of const, and is especially confusing on string
functions due to the lack of a string type. Quoting from C99, the
syntax is:
declarator:
pointer[opt] direct-declarator
direct-declarator:
identifier
( declarator )
direct-declarator [ type-qualifier-list[opt] assignment-expression[opt] ]
...
direct-declarator [ type-qualifier-list[opt] * ]
...
pointer:
* type-qualifier-list[opt]
* type-qualifier-list[opt] pointer
type-qualifier-list:
type-qualifier
type-qualifier-list type-qualifier
...
type-qualifier:
const
restrict
volatile
So the examples go like:
const char foo; // immutable object
const char *foo; // mutable pointer to object
char * const foo; // immutable pointer to mutable object
const char * const foo; // immutable pointer to immutable object
const char const * const foo; // XXX extra const keyword in the middle
const char * const * const foo; // immutable pointer to immutable
// pointer to immutable object
const char ** const foo; // immutable pointer to mutable pointer
// to immutable object
Making const left-associative for * and right-associative for everything
else may not have been the best choice ever, but here we are, and the
inevitable result is people using trying to use const (as they should!),
putting it at the wrong place, fighting with the compiler for a bit, and
then either removing it or typecasting something in a bad way. I won't
go into describing restrict, but its syntax has exactly the same issue
as with const.
Anyway, the last example above actually represents the *behavior* that's
required of strtol()-like functions, so that's our choice for the "end"
pointer.
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub-editenv create command will wrongly overwrite /boot/grub2/grubenv
with a regular file if grubenv is a symbolic link. But instead, it should
create a new file in the path the symlink points to.
This lets /boot/grub2/grubenv be a symlink to /boot/efi/EFI/fedora/grubenv
even when they're different mount points, which allows grub2-editenv to be
the same across platforms (i.e. UEFI vs BIOS).
For example, in Fedora the GRUB EFI builds have prefix set to /EFI/fedora
(on the EFI System Partition), but for BIOS machine it'll be /boot/grub2
(which may or may not be its own mountpoint).
With this patch, on EFI machines we can make /boot/grub2/grubenv a symlink
to /boot/efi/EFI/fedora/grubenv, and the same copy of grub-set-default will
work on both kinds of systems.
Windows doesn't implement a readlink primitive, so the current behaviour is
maintained for this operating system.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Jonathan Lebon <jlebon@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The environment block is a preallocated 1024-byte file which serves as
persistent storage for environment variables. It has its own format
which is sensitive to corruption if an editor does not know how to
process it. Besides that the editor may inadvertently change grubenv
file size and/or make it sparse which can lead to unexpected results.
This patch adds a message to the grubenv file to warn a user against
editing it by tools other than grub-editenv.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The "which" utility is not guaranteed to be installed either, and if it
is, its behavior is not portable either.
Conversely, the "command -v" shell builtin is required to exist in all
POSIX 2008 compliant shells, and is thus guaranteed to work everywhere.
Examples of open-source shells likely to be installed as /bin/sh on
Linux, which implement the 11-year-old standard: ash, bash, busybox,
dash, ksh, mksh and zsh.
A side benefit of using the POSIX portable option is that it requires
neither an external disk executable, nor (because unlike "which", the
exit code is reliable) a subshell fork. This therefore represents a mild
speedup.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub-mkconfig and 10_linux scripts by default attempt to use a UUID to
set the root kernel command line parameter and the $root GRUB environment
variable.
The former can be disabled by setting the GRUB_DISABLE_LINUX_UUID variable
to "true", but there is currently no way to disable the latter.
The generated grub config uses the search command with the --fs-uuid option
to find the device that has to be set as $root, i.e:
search --no-floppy --fs-uuid --set=root ...
This is usually more reliable but in some cases it may not be appropriate,
so this patch introduces a new GRUB_DISABLE_UUID variable that can be used
to disable searching for the $root device by filesystem UUID.
When disabled, the $root device will be set to the value specified in the
device.map as found by the grub-probe --target=compatibility_hint option.
When setting GRUB_DISABLE_UUID=true, the GRUB_DISABLE_LINUX_UUID and
GRUB_DISABLE_LINUX_PARTUUID variables will also be set to "true" unless
these have been explicitly set to "false".
That way, the GRUB_DISABLE_UUID variable can be used to force using the
device names for both GRUB and Linux.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Nicholas Vinson <nvinson234@gmail.com>
The GRUB_DISABLE_SUBMENU option is different than the others in the sense
that it has to be set to "y" instead of "true" to be enabled.
That causes a lot of confusion to users, some may wrongly set it to "true"
expecting that will work the same than with most options, and some may set
it to "yes" since for other options the value to set is a word and not a
single character.
This patch changes all the grub.d scripts using the GRUB_DISABLE_SUBMENU
option, so they check if it was set to "true" instead of "y", making it
consistent with all the other options.
But to keep backward compatibility for users that set the option to "y" in
/etc/default/grub file, keep testing for this value. And also do it for
"yes", since it is a common mistake made by users caused by this option
being inconsistent with the others.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The short form of "--version" that grub-mkconfig accepts is "-V", not "-v".
Fixes Debian bug #935504.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Vladimir 'phcoder' Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Honor a symlink when generating configuration by grub-mkconfig, so that
the -o option follows it rather than overwriting it with a regular file.
Signed-off-by: Marcel Kolaja <mkolaja@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently, gpt_offset is uninitialised when using a BIOS Boot Partition
but is used unconditionally inside save_blocklists. Instead, ensure it
is always initialised to 0 (note that there is already separate code to
do the equivalent adjustment after we call save_blocklists on this code
path).
This patch has been tested on a T5-2 LDOM.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Eric Snowberg <eric.snowberg@oracle.com>
---
util/setup.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
The offset calculation was missing the relocation addend.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Tested-by: Chester Lin <clin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
"--printf" only works with the stat variant provided by coreutils.
With busybox, stat will fail with the following error:
stat: unrecognized option '--printf=%T'
Usage: stat [OPTIONS] FILE...
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The arm relocation code has a manual special case for EFI binaries to
add the natural alignment to its own relocation awareness.
Since commit a51f953f4e ("mkimage: Align efi sections on 4k
boundary") we changed that alignment from 0x400 to 0x1000 bytes. Reflect
the change in that branch that we forgot as well.
This fixes running 32bit arm grub efi binaries for me again.
Fixes: a51f953f4e ("mkimage: Align efi sections on 4k boundary")
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reported-by: Steve McIntyre <steve@einval.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Julien ROBIN <julien.robin28@free.fr>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When creating T32->A32 transition jumps, the relocation code in grub
will generate trampolines. These trampolines live in the .data section
of our PE binary which means they are not marked as executable.
This misbehavior was unmasked by commit a51f953f4e ("mkimage: Align
efi sections on 4k boundary") which made the X/NX boundary more obvious
because everything became page aligned.
To put things into proper order, let's move the arm trampolines into the
.text section instead. That way everyone knows they are executable.
Fixes: a51f953f4e ("mkimage: Align efi sections on 4k boundary")
Reported-by: Julien ROBIN <julien.robin28@free.fr>
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Tested-by: Julien ROBIN <julien.robin28@free.fr>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add BIOS Boot Partition support for sparc64 platforms. This will work a
little different than x86. With GPT, both the OBP "load" and "boot" commands
are partition aware and neither command can see the partition table. Therefore
the entire boot-loader is stored within the BIOS Boot Partition and nothing
is stored within the bootstrap code area of MBR.
To use it, the end user will issue the boot command with the path pointing to
the BIOS Boot Partition.
For example with the disk below:
Model: Unknown (unknown)
Disk /dev/nvme1n1: 1600GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 1075MB 1074MB ext3
2 1075MB 1076MB 1049kB bios_grub
3 1076MB 1600GB 1599GB lvm
To boot grub2 from OBP, you would use:
boot /pci@302/pci@1/pci@0/pci@13/nvme@0/disk@1:b
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Upgrade Gnulib files to 20190105.
It's much easier to maintain GRUB's use of portability support files
from Gnulib when the process is automatic and driven by a single
configuration file, rather than by maintainers occasionally running
gnulib-tool and committing the result. Removing these
automatically-copied files from revision control also removes the
temptation to hack the output in ways that are difficult for future
maintainers to follow. Gnulib includes a "bootstrap" program which is
designed for this.
The canonical way to bootstrap GRUB from revision control is now
"./bootstrap", but "./autogen.sh" is still useful if you just want to
generate the GRUB-specific parts of the build system.
GRUB now requires Autoconf >= 2.63 and Automake >= 1.11, in line with
Gnulib.
Gnulib source code is now placed in grub-core/lib/gnulib/ (which should
not be edited directly), and GRUB's patches are in
grub-core/lib/gnulib-patches/. I've added a few notes to the developer
manual on how to maintain this.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Many of GRUB's utilities don't check anywhere near all the possible
write errors. For example, if grub-install runs out of space when
copying a file, it won't notice. There were missing checks for the
return values of write, fflush, fsync, and close (or the equivalents on
other OSes), all of which must be checked.
I tried to be consistent with the existing logging practices of the
various hostdisk implementations, but they weren't entirely consistent
to start with so I used my judgement. The result at least looks
reasonable on GNU/Linux when I provoke a write error:
Installing for x86_64-efi platform.
grub-install: error: cannot copy `/usr/lib/grub/x86_64-efi-signed/grubx64.efi.signed' to `/boot/efi/EFI/debian/grubx64.efi': No space left on device.
There are more missing checks in other utilities, but this should fix
the most critical ones.
Fixes Debian bug #922741.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top of EFI
firmware. If so, return "arm-efi". If not, fall back to "arm-uboot" as
previously.
Split out the code to (maybe) load the efivar module and check for
/sys/firmware/efi into a common helper routine is_efi_system().
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This reverts commit 082fd84d52.
Incorrect version of the patch was pushed into the git repo.
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top
of EFI firmware. If so, return "arm-efi". If not, fall back to
"arm-uboot" as previously.
Heavily inspired by the existing code for x86.
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds support for RISC-V to the grub build system. With this
patch, I can successfully build grub on RISC-V as a UEFI application.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds awareness of RISC-V relocations throughout the grub tools
as well as dynamic linkage and elf->PE relocation conversion support.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are a few spots in the PE generation code for EFI binaries that uses
the section alignment rather than file alignment, even though the alignment
is really only file bound.
Replace those cases with the file alignment constant instead.
Reported-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Julien ROBIN <julien.robin28@free.fr>
The efi-arm case was defining its own header size calculation, even though it's
100% identical to the common EFI32_HEADER_SIZE definition.
So let's clean it up to use the common define.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Julien ROBIN <julien.robin28@free.fr>
Add support for multiple, shared, early initrd images. These early
images will be loaded in the order declared, and all will be loaded
before the initrd image.
While many classes of data can be provided by early images, the
immediate use case would be for distributions to provide CPU
microcode to mitigate the Meltdown and Spectre vulnerabilities.
Xen has also support to load microcode updates provided as additional
modules by the bootloader.
There are two environment variables provided for declaring the early
images.
* GRUB_EARLY_INITRD_LINUX_STOCK is for the distribution declare
images that are provided by the distribution or installed packages.
If undeclared, this will default to a set of common microcode image
names.
* GRUB_EARLY_INITRD_LINUX_CUSTOM is for user created images. User
images will be loaded after the stock images.
These separate configurations allow the distribution and user to
declare different image sets without clobbering each other.
This also makes a minor update to ensure that UUID partition labels
stay disabled when no initrd image is found, even if early images are
present.
This is basically a copy of a698240d "grub-mkconfig/10_linux: Support
multiple early initrd images" by Matthew S. Turnbull.
Signed-off-by: Peter Große <pegro@friiks.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add xen_pvh support to grub-install.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Support mkimage for xen_pvh.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
In order to avoid using plain integers for the ELF notes use the
available Xen include instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
This solves the build failing with "Error: no symbol table and no
.moddeps section"
Also see:
- 6371e9c104
- https://savannah.gnu.org/bugs/?49012
Signed-off-by: Hans van Kranenburg <hans@knorrie.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Device tree (DTB) lengths are being padded to a multiple of 4 bytes
rather than the target-specific pointer size. This causes objects
following OBJ_TYPE_DTB objects to be incorrectly parsed during GRUB
execution on arm64.
Fix by using ALIGN_ADDR(), not ALIGN_UP().
Signed-by-off: Matthew Daley <mattd@bugfuzz.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
If / is on the root dataset in a ZFS pool, then ${bootfs} will be set to
"/" (whereas if it is on a non-root dataset, there will be no trailing
slash). Passing "root=ZFS=${rpool}/" will fail to boot, but
"root=ZFS=${rpool}" works fine, so strip the trailing slash.
Fixes: https://savannah.gnu.org/bugs/?52746
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Tested-by: Fejes József <jozsef.fejes@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Let's provide file type info to the I/O layer. This way verifiers
framework and its users will be able to differentiate files and verify
only required ones.
This is preparatory patch.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
The "for the next boot only" property of grub-reboot is dependent upon
GRUB being able to clear the next_entry variable in the environment
block. However, GRUB cannot write to devices using the diskfilter
and lvm abstractions.
Ref: https://lists.gnu.org/archive/html/grub-devel/2009-12/msg00276.html
Ref: https://bugs.launchpad.net/bugs/788298
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Make it so that when grub-module-verifier complains of an issue, it tells you
which module the issue was with.
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Variable "root" is initialized after root device probing and is null in
current place, so, drop it.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Commit 51be337 (templates: Update grub script template files)
lacked one "]", so, add it.
Reported-by: Philip <philm@manjaro.org>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Update grub-mkconfig.in and 10_linux.in to support grub-probe's new
partuuid target. Update grub.texi documentation. The following table
shows how GRUB_DISABLE_LINUX_UUID, GRUB_DISABLE_LINUX_PARTUUID, and
initramfs detection interact:
Initramfs GRUB_DISABLE_LINUX_PARTUUID GRUB_DISABLE_LINUX_UUID Linux Root
detected Set Set ID Method
false false false part UUID
false false true part UUID
false true false dev name
false true true dev name
true false false fs UUID
true false true part UUID
true true false fs UUID
true true true dev name
Note: GRUB_DISABLE_LINUX_PARTUUID and GRUB_DISABLE_LINUX_UUID equate to
'false' when unset or set to any value other than 'true'.
GRUB_DISABLE_LINUX_PARTUUID defaults to 'true'.
Signed-off-by: Nicholas Vinson <nvinson234@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add PARTUUID detection support grub-probe for MBR and GPT partition schemes.
Signed-off-by: Nicholas Vinson <nvinson234@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Rename grub_gpt_part_type to grub_gpt_part_guid and update grub_gpt_partentry
to use this type for both the partition type GUID string and the partition GUID
string entries. This change ensures that the two GUID fields are handled more
consistently and helps to simplify the changes needed to add Linux partition
GUID support.
Signed-off-by: Nicholas Vinson <nvinson234@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Define print_gpt_guid(), so there is a central function for printing
GUID strings. This change is a precursor for later patches which rely
on this logic.
Signed-off-by: Nicholas Vinson <nvinson234@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
