* kern/disk.c: Replace `<grub/machine/time.h>' with `<grub/time.h>'.
(grub_last_time): Change type to grub_uint64_t.
(grub_disk_open): Migrate code from to using grub_get_time_ms().
(grub_disk_close): Likewise.
* normal/menu.c: Replace `<grub/machine/time.h>' with `<grub/time.h>'.
(run_menu): Migrate code from to using grub_get_time_ms().
* util/misc.c (grub_get_time_ms): New function.
* disk/ata.c (grub_ata_regget): Change return type to
`grub_uint8_t'.
(grub_ata_regget2): Likewise.
(grub_ata_wait_status): New function.
(grub_ata_wait_busy): Removed function, updated all users to use
`grub_ata_wait_status'.
(grub_ata_wait_drq): Likewise.
(grub_ata_cmd): New function.
(grub_ata_pio_read): Change return type to `grub_uint8_t'. Add
error handling.
(grub_ata_pio_write): Add error handling.
(grub_atapi_identify): Likewise.
(grub_atapi_packet): Use `grub_ata_cmd' and improve error
handling.
(grub_ata_identify): Use `grub_ata_cmd' and improve error
handling. Actually use the detected registers. Reorder the
detection logic such that it is easier to read.
(grub_ata_pciinit): Do not assign the same ID to each controller.
(grub_ata_setaddress): Use `grub_ata_cmd' and improve error
handling.
(grub_atapi_readsector): Check the result of `grub_ata_pio_read'.
* include/grub/err.h (grub_err_t): Add `GRUB_ERR_TIMEOUT'.
* kern/i386/pit.c (TIMER2_SPEAKER): New define.
(TIMER2_GATE): Likewise.
(grub_pit_wait): Add enable/disable of the timer2 gate
bit of port 0x61. This fixes a possible infinite loop.
* fs/i386/pc/pxe.c (grub_pxe_data): New member block_size.
(grub_pxefs_fs_int): Remove dummy definition.
(grub_pxefs_open): Use data->block_size to store the current block
size setting.
(grub_pxefs_read): Use block size stored in data->block_size. As the
value of grub_pxe_blksize can be changed after the file is opened.
* fs/i386/pc/pxe.c (curr_file): new variable.
(grub_pxefs_open): Simply the handling of pxe file system. Don't
require the dummy internal file system anymore.
(grub_pxefs_read): Removed.
(grub_pxefs_close): Likewise.
(grub_pxefs_fs_int): Likewise.
(grub_pxefs_read_int): Renamed to grub_pxefs_read. Reinitialize tftp
connection when we switch file.
(grub_pxefs_close_int): Renamed to grub_pxefs_close.
* util/console.c (grub_console_cur_color): New variable.
(grub_console_standard_color): Likewise.
(grub_console_normal_color): Likewise.
(grub_console_highlight_color): Likewise.
(color_map): Likewise.
(use_color): Likewise.
(NUM_COLORS): New macro.
(grub_ncurses_setcolorstate): Handle color properly.
(grub_ncurses_setcolor): Don't change color here, just remember the
settings, color will be set in grub_ncurses_setcolorstate.
(grub_ncurses_getcolor): New function.
(grub_ncurses_init): Initialize color pairs.
(grub_ncurses_term): New member grub_ncurses_getcolor.
High resolution timer support. Implemented for x86 CPUs using TSC.
Extracted generic grub_millisleep() so it's linked in only as needed.
This requires a Pentium compatible CPU; if the RDTSC instruction is
not supported, then it falls back on the generic grub_get_time_ms()
implementation that uses the machine's RTC.
* conf/i386-pc.rmk (kernel_img_SOURCES): Add `kern/time.c',
`kern/i386/tsc.c', `kern/generic/rtc_get_time_ms.c' and
`kern/generic/millisleep.c'.
* conf/i386-efi.rmk (kernel_mod_SOURCES): Add `kern/i386/tsc.c',
`kern/generic/rtc_get_time_ms.c' and `kern/generic/millisleep.c'.
* conf/x86_64-efi.rml (kernel_mod_SOURCES): Add
`kern/generic/millisleep.c' and `kern/generic/rtc_get_time_ms.c'.
* conf/sparc64-ieee1275.rmk (kernel_elf_SOURCES): Likewise.
* conf/powerpc-ieee1275.rmk (kernel_elf_SOURCES): Add
`kern/generic/millisleep.c'.
* conf/i386-ieee1275.rmk (kernel_elf_SOURCES): Likewise.
* conf/i386-coreboot.rmk (kernel_elf_SOURCES): Add `kern/time.c'.
* kern/generic/rtc_get_time_ms.c: New file.
* kern/generic/millisleep.c: New file.
* kern/misc.c: Don't include
<kern/time.h> anymore.
(grub_millisleep_generic): Removed.
* commands/sleep.c (grub_interruptible_millisleep): Uses
grub_get_time_ms() instead of grub_get_rtc().
* include/grub/i386/tsc.h (grub_get_tsc): New file. New inline
function.
(grub_cpu_is_cpuid_supported): New inline function.
(grub_cpu_is_tsc_supported): New inline function.
(grub_tsc_init): New function prototype.
(grub_tsc_get_time_ms): New function prototype.
* kern/i386/tsc.c (grub_get_time_ms): New file.
* include/grub/time.h: Include <grub/types.h.
(grub_millisleep_generic): Removed.
(grub_get_time_ms): New prototype.
(grub_install_get_time_ms): New prototype.
(grub_rtc_get_time_ms): New prototype.
* kern/time.c (grub_get_time_ms): New function.
(grub_install_get_time_ms): New function.
* kern/i386/efi/init.c: Include <grub/cpu/tsc.h>. Don't include
<grub/time.h> anymore.
(grub_millisleep): Removed.
(grub_machine_init): Call grub_tsc_init.
* kern/i386/linuxbios/init.c (grub_machine_init): Install the RTC
get_time_ms() implementation.
* kern/sparc64/ieee1275/init.c (grub_millisleep): Removed.
(ieee1275_get_time_ms): New function.
(grub_machine_init): Install get_time_ms() implementation.
* kern/i386/pc/init.c: Include <grub/cpu/tsc.h>.
(grub_machine_init): Call grub_tsc_init().
(grub_millisleep): Removed.
* kern/ieee1275/init.c (grub_millisleep): Removed.
(grub_machine_init): Install ieee1275_get_time_ms()
implementation.
(ieee1275_get_time_ms): New function.
(grub_get_rtc): Now calls ieee1275_get_time_ms(), which does the
real work.
* util/grub.d/00_header.in: Be platform-agnostic. Probe for existence
of modules instead of assuming which platform provides what.
* util/update-grub.in: Likewise.
* kern/i386/pc/init.c (make_install_device): Check for `grub_prefix'
instead of `grub_install_dos_part' to determine whether a drive needs
to be prepended to prefix (`grub_install_dos_part' is not reliable,
because it can be overriden when loading GRUB via Multiboot).
* disk/memdisk.c (memdisk_size): Don't initialize.
(GRUB_MOD_INIT(memdisk)): Find memdisk using grub_module_iterate().
* include/grub/i386/pc/kernel.h
(GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE): Remove macro.
(GRUB_KERNEL_MACHINE_PREFIX, GRUB_KERNEL_MACHINE_DATA_END): Shift.
(grub_memdisk_image_size, grub_arch_memdisk_addr)
(grub_arch_memdisk_size): Remove.
* include/grub/kernel.h (struct grub_module_header): Remove `offset'
field (was only used to transfer a constant). Add `type' field to
support multiple module types.
(grub_module_iterate): New function.
* kern/device.c (grub_device_open): Do not hide error messages
when grub_disk_open() fails. Use grub_print_error() instead.
* kern/i386/pc/init.c (grub_arch_modules_addr)
(grub_arch_memdisk_size): Remove functions.
(grub_arch_modules_addr): Return the module address in high memory
(now that it isn't copied anymore).
* kern/i386/pc/startup.S (grub_memdisk_image_size): Remove variable.
(codestart): Don't add grub_memdisk_image_size to %ecx in LZMA
decompression routine (grub_total_module_size already includes that
now). Don't copy modules back to low memory.
* kern/main.c: Include `<grub/mm.h>'.
(grub_load_modules): Split out (and use) ...
(grub_module_iterate): ... this function, which iterates through
module objects and runs a hook.
Comment out grub_mm_init_region() call, as it would cause non-ELF
modules to be overwritten.
* util/i386/pc/grub-mkimage.c (generate_image): Instead of appending
the memdisk image in its own region, make it part of the module list.
* util/elf/grub-mkimage.c (options): Add "memdisk"|'m' option.
(main): Parse --memdisk|-m option, and pass user-provided path as
parameter to generate_image().
(add_segments): Pass `memdisk_path' down to load_modules().
(load_modules): Embed memdisk image in module section when requested.
* util/i386/efi/grub-mkimage.c (make_mods_section): Initialize
`header.type' instead of `header.offset'.
* conf/powerpc-ieee1275.rmk (pkglib_MODULES): Add `memdisk.mod'.
(memdisk_mod_SOURCES, memdisk_mod_CFLAGS)
(memdisk_mod_LDFLAGS): New variables.
* conf/i386-coreboot.rmk: Likewise.
* conf/i386-ieee1275.rmk: Likewise.
* loader/i386/pc/multiboot.c (playground, forward_relocator)
(backward_relocator): New variables. Used to allocate and relocate
the payload, respectively.
(grub_multiboot_load_elf32): Load into heap instead of requested
address, install the appropiate relocator code in each bound of
the payload, and set the entry point such that
grub_multiboot_real_boot() will jump to one of them.
* kern/i386/loader.S (grub_multiboot_payload_size)
(grub_multiboot_payload_orig, grub_multiboot_payload_dest)
(grub_multiboot_payload_entry_offset): New variables.
(grub_multiboot_real_boot): Set cpu context to what the relocator
expects, and jump to the relocator instead of the payload.
* include/grub/i386/loader.h (grub_multiboot_payload_size)
(grub_multiboot_payload_orig, grub_multiboot_payload_dest)
(grub_multiboot_payload_entry_offset): Export.
* conf/common.rmk (pkglib_MODULES): Add bufio.mod.
(bufio_mod_SOURCES): New macro.
(bufio_mod_CFLAGS): Likewise.
(bufio_mod_LDFLAGS): Likewise.
* include/grub/bufio.h: New file.
* io/bufio.c: Likewise.
* video/png.c: Replace <grub/file.h> with <grub/bufio.h>.
(grub_video_reader_png): Use grub_buffile_open to open file.
* video/jpeg.c: Replace <grub/file.h> with <grub/bufio.h>.
(grub_video_reader_jpeg): Use grub_buffile_open to open file.
* video/tga.c: Replace <grub/file.h> with <grub/bufio.h>.
(grub_video_reader_tga): Use grub_buffile_open to open file.
* font/manager.c: Include <grub/bufio.h>.
(add_font): Use grub_buffile_open to open file.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): When loading
ELF segments, use a macro for arbitrarily accessing any of them instead
of preparing a pointer that allows access to one at a time.
(grub_multiboot_load_elf64): Likewise.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_DATA_END):
Increase from 0x50 to 0x60.
* util/i386/pc/grub-install.in: Detect cross-disk installs, and
use UUIDs to identify the root drive for them. If that's not
possible, abort.
* util/i386/pc/grub-setup.c (setup): Do not special-case, or even
check, for cross-disk installs.
* kern/ieee1275/init.c (grub_machine_set_prefix): If `grub_prefix'
is non-empty, use it to set the `prefix' environment variable instead
of the usual approach.
* kern/i386/linuxbios/init.c (make_install_device): Remove function.
(grub_machine_set_prefix): Use `grub_prefix' to set the `prefix'
environment variable instead of dummy make_install_device().
* kern/i386/ieee1275/startup.S: Include `<grub/machine/kernel.h>'.
(start): Insert a data section, with `grub_prefix' variable.
* kern/i386/linuxbios/startup.S: Likewise.
* include/grub/powerpc/ieee1275/kernel.h [!ASM_FILE] (grub_prefix):
New variable reference.
* include/grub/i386/ieee1275/kernel.h (GRUB_KERNEL_MACHINE_PREFIX):
New macro. Defines offset of `grub_prefix' within startup.S (relative
to `start').
(GRUB_KERNEL_MACHINE_DATA_END): New macro. Defines the end of data
section within startup.S (relative to `start').
* include/grub/i386/coreboot/kernel.h: Likewise.
* util/elf/grub-mkimage.c (add_segments): Receive `prefix' parameter.
Overwrite grub_prefix with its contents, at the beginning of the
first segment.
(main): Understand -p|--prefix.
* term/i386/pc/vga_text.c (grub_console_cls): Use
grub_console_gotoxy() to go back to beginning of the screen.
Found by Patrick Georgi <patrick.georgi@coresystems.de>
* util/update-grub.in: Add a check for admin
group on Cygwin.
Remove old `grub.cfg.new' before creation.
Add `-f' to `mv' to handle the different filesystem
semantics of Windows.
