* util/grub.d/10_kfreebsd.in: Initialize ${kfreebsd_device} as the
kFreeBSD device name, except on ZFS where the filesystem label is
used.
(kfreebsd_entry): On ZFS root, load `opensolaris.ko', `zfs.ko' and
`/boot/zfs/zpool.cache'.
Set mountfrom kernel variable using ${kfreebsd_device}.
Make it even harder to use uninitialized `libzfs_handle' (and
make the interface a bit simpler).
* include/grub/util/misc.h (grub_util_init_libzfs)
(libzfs_handle): Remove.
(grub_get_libzfs_handle): New prototype.
* util/misc.c [HAVE_LIBZFS] (libzfs_handle): Add `static'
attribute.
(grub_util_init_libzfs): Remove.
(grub_get_libzfs_handle): New function.
* kern/emu/getroot.c (find_root_device_from_libzfs): Use
grub_get_libzfs_handle() to obtain a libzfs handle instead of
accessing `libzfs_handle' directly.
Prevent accidental use of uninitialized libzfs_handle.
* util/grub-probe.c (main): Move grub_util_init_libzfs() call to ...
* kern/emu/getroot.c (find_root_device_from_libzfs): ... here.
* util/misc.c (grub_util_init_libzfs): Make this function idempotent.
Enable `grub-probe -t device' resolution on ZFS.
* configure.ac: Check for getfsstat(), libzfs and libnvpair.
* include/grub/util/libnvpair.h: New file.
* include/grub/util/libzfs.h: New file.
* kern/emu/getroot.c: Include `<assert.h>' and `<error.h>'.
[HAVE_LIBZFS && HAVE_LIBNVPAIR]: Include `<grub/util/libzfs.h>' and
`<grub/util/libnvpair.h>'.
[HAVE_GETFSSTAT]: Include `<sys/mount.h>'.
(find_mount_point_from_dir): New static function.
[HAVE_LIBZFS && HAVE_LIBNVPAIR] (find_root_device_from_libzfs): New
function.
[HAVE_LIBZFS && HAVE_LIBNVPAIR] (grub_guess_root_device): Use
find_root_device_from_libzfs() before ressorting to find_root_device().
* include/grub/util/misc.h (grub_util_init_libzfs): New function
prototype.
* util/misc.c: Include `<grub/util/libzfs.h>'.
(grub_util_init_libzfs): New function.
[HAVE_LIBZFS] (libzfs_handle): New global variable.
[HAVE_LIBZFS] (fini_libzfs): New static function.
(grub_util_init_libzfs): New function.
* util/grub-probe.c (main): Call grub_util_init_libzfs().
2010-07-20 Colin Watson <cjwatson@ubuntu.com>
Generate device.map in something closer to the old ordering.
* util/deviceiter.c (struct device): New declaration.
(compare_file_names): Rename to ...
(compare_devices): ... this. Sort by kernel name in preference to
the stable by-id name, but keep the latter as a fallback comparison.
Update header comment.
(grub_util_iterate_devices) [__linux__]: Construct and sort an array
of `struct device' rather than of plain file names.
Also-By: Colin Watson <cjwatson@ubuntu.com>
* disk/raid.c (insert_array): Use md/%s to name mdadm 1.x devices,
removing the homehost if present.
* kern/emu/getroot.c (get_mdadm_name) [__linux__]: New function.
(grub_util_get_grub_dev): Use md/%s to name mdadm 1.x devices,
removing the homehost if present.
(grub_util_get_grub_dev) [__linux__]: Get the array name from mdadm
if possible.
* util/i386/pc/grub-setup.c (main): Handle md/* devices.
* disk/dmraid_nvidia.c (grub_dmraid_nv_detect): Add start_sector
parameter. Set its pointer target to 0.
* disk/mdraid_linux.c (grub_mdraid_detect): Add start_sector
parameter. Set its pointer target to 0 for 0.9 metadata, or to the
`data_offset' value from the superblock for 1.x metadata.
* disk/raid.c (grub_raid_read): Offset reads by the start sector of
data on the device.
(insert_array): Record the start sector of data on the device.
(grub_raid_register): Pass start_sector parameters to
grub_raid_list->detect and insert_array.
* include/grub/raid.h (struct grub_raid_array): Add start_sector
member.
(struct grub_raid): Add start_sector parameter to `detect'.
* disk/mdraid_linux.c (struct grub_raid_super_1x): Remove
__attribute__ ((packed)), leaving a comment.
(grub_mdraid_detect): Split out 0.9 and 1.x detection to ...
(grub_mdraid_detect_09): ... here and ...
(grub_mdraid_detect_1x): ... here.
2010-07-20 Peter Henn <peter.henn@web.de>
* disk/mdraid_linux.c (grub_mdraid_detect): Fix calculation of 1.x
chunk size and disk size, which are already given as sector counts
as distinct from the 0.90 units. Fetch the correct device number
from the role table instead of using the table index.
2010-07-20 Felix Zielcke <fzielcke@z-51.de>
* disk/dmraid_nvidia.c (grub_dmraid_nv_detect): Set array->name to NULL.
* disk/mdraid_linux.c (grub_raid_super_1x): New structure.
(WriteMostly1): New macro.
Set array->name to NULL for metadata format 0.90. Add support for
metadata 1.x. Fix some comments.
* disk/raid.c (): Add support for name based RAID arrays. Fix a
few comments.
* util/getroot.c (grub_util_get_grub_dev): Add support for
/dev/md/name style devices.
Also-By: Peter Henn <peter.henn@web.de>
Also-By: Colin Watson <cjwatson@ubuntu.com>
removing the homehost if present.
* kern/emu/getroot.c (get_mdadm_name) [__linux__]: New function.
(grub_util_get_grub_dev): Use md/%s to name mdadm 1.x devices,
removing the homehost if present.
(grub_util_get_grub_dev) [__linux__]: Get the array name from mdadm
if possible.
* util/i386/pc/grub-setup.c (main): Handle md/* devices.
install_prefix, in line with install_dos_part and install_bsd_part.
Add new prefix variable, which is copied to install_prefix after
comparing core.img in memory with the one read from disk in the
no-embedding case, and use that rather than overwriting
install_prefix immediately when installing to a partition.
Fixes Debian bug #586621; based on patches by Matt Kraai and M. Vefa
Bicakci.
* util/grub-mkconfig.in: Export `GRUB_BADRAM' variable.
* util/grub.d/00_header.in: When `GRUB_BADRAM' is set, issue badram
command using ${GRUB_BADRAM} as parameter.
possible on Linux.
* util/deviceiter.c (check_device): Rename to ...
(check_device_readable_unique): ... this. Update all callers.
Maintain and check a list of which devices (by canonicalized name)
have already been seen.
(clear_seen_devices): New function.
(compare_file_names) [__linux__]: New function.
(grub_util_iterate_devices): Clear the list of seen devices on exit
and (just in case) on entry.
(grub_util_iterate_devices) [__linux__]: Iterate over non-partition
devices in /dev/disk/by-id/, in sorted order. Remove DM-RAID
seen-devices list, superseded by general code in check_device.
setting GRUB_VIDEO_BACKEND. Make it available as a user override
instead. Replace the gfxterm backend check with a check that
${GRUB_PREFIX}/video.lst is non-empty.
* util/grub.d/00_header.in: Use GRUB_PREFIX rather than computing it
again.
(load_video): New generated function. Call it before loading
gfxterm rather than loading ${GRUB_VIDEO_BACKEND}.
* util/grub.d/10_linux.in (linux_entry): Call load_video.
* util/grub.d/30_os-prober.in (osx_entry): Likewise.
* docs/grub.texi (Simple configuration): Document
GRUB_VIDEO_BACKEND.
Use video functions in linux and xnu loaders.
* conf/i386-pc.rmk (xnu_mod_SOURCES): Remove loader/i386/pc/xnu.c.
* conf/x86-efi.rmk (xnu_mod_SOURCES): Remove loader/i386/efi/xnu.c.
* include/grub/i386/xnu.h (grub_xnu_set_video): Removed.
* loader/i386/efi/linux.c (grub_linux_setup_video): Copied from
loader/i386/pc/linux.c.
(grub_linux_boot): Resynced with loader/i386/pc/linux.c.
(find_line_len): Removed.
(find_framebuf): Likewise.
(grub_cmd_linux): Declare grub_linux_boot as possibly returning.
* loader/i386/efi/xnu.c: Removed.
* loader/i386/pc/xnu.c: Moved from here...
* loader/i386/xnu.c: ...here.
Enable priorities in video drivers.
* include/grub/video.h (grub_video_adapter_prio_t): New type.
(grub_video_adapter): New field prio.
(grub_video_register): Respect prio when inserting.
* video/efi_gop.c (grub_video_gop_adapter): Add prio.
* video/efi_uga.c (grub_video_uga_adapter): Likewise.
* video/emu/sdl.c (grub_video_sdl_adapter): Likewise.
* video/i386/pc/vbe.c (grub_video_vbe_adapter): Likewise.
* video/i386/pc/vga.c (grub_video_vga_adapter): Likewise.
* video/ieee1275.c (grub_video_ieee1275_adapter): Likewise.
* video/sm712.c (grub_video_sm712_adapter): Likewise.
Fix SDL driver ID.
* include/grub/video.h (grub_video_driver_id_t): New value
GRUB_VIDEO_DRIVER_SDL.
* video/emu/sdl.c (grub_video_sdl_adapter): Add id.
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
available as a user override instead. Replace the gfxterm backend
check with a check that ${GRUB_PREFIX}/video.lst is non-empty.
* util/grub.d/00_header.in (load_video): New generated function.
Call it before loading gfxterm rather than loading
${GRUB_VIDEO_BACKEND}.
* util/grub.d/10_linux.in (linux_entry): Call load_video.
* util/grub.d/30_os-prober.in (osx_entry): Likewise.
* docs/grub.texi (Simple configuration): Document
GRUB_VIDEO_BACKEND.
#585068). Note that the case where the core image is booted using
multiboot and relocated from its original location still requires
more work.
* kern/i386/pc/init.c (make_install_device): If the prefix starts
with "(,", fill the boot drive in between those two characters, but
expect that a full partition specification including partition map
names will follow.
* util/i386/pc/grub-setup.c (setup): Unless an explicit prefix was
specified, write a prefix without the drive name but including a
full partition specification.
compatibility with older versions (before 2010-06-12) which did the
same. In particular, this makes it easier to ship an update-grub
wrapper which is compatible with that used with GRUB Legacy (Debian
bug #586056).
* util/grub.d/00_header.in: Use GRUB_PREFIX rather than computing it
again.
* util/grub.d/10_linux.in (linux_entry): Load all video drivers,
which may be needed to allow the loader to program modes for the
kernel.
(grub_device_mapper_supported): New function.
* include/grub/emu/misc.h (grub_device_mapper_supported): Add
prototype.
* kern/emu/hostdisk.c (find_partition_start): Check whether
device-mapper is supported before trying to use it.
* util/deviceiter.c (grub_util_iterate_devices): Likewise.
-DGRUB_PKGLIBROOTDIR= and prepend @PACKAGE_TARNAME@. All users updated.
* util/grub-mkimage.c (image_targets): Add i386-multiboot.
(main): Add a slash after pkglibdirroot.
* util/hostdisk.c (device_is_mapped): New function.
(find_partition_start): New function, partly broken out from
linux_find_partition and grub_util_biosdisk_get_grub_dev but with
device-mapper support added.
(linux_find_partition): Use find_partition_start.
(convert_system_partition_to_system_disk): Add `st' argument.
Support Linux /dev/mapper/* devices if device-mapper support is
available; only DM-RAID devices are understood at present.
(find_system_device): Add `st' argument. Pass it to
convert_system_partition_to_system_disk.
(grub_util_biosdisk_get_grub_dev): Pass stat result to
find_system_device and convert_system_partition_to_system_disk. Use
find_partition_start.
* conf/common.rmk (grub_mkdevicemap_SOURCES): Add kern/env.c,
kern/err.c, kern/list.c, kern/misc.c, and kern/emu/mm.c.
* util/deviceiter.c [__linux__]: Define MINOR.
(grub_util_iterate_devices): Add support for DM-RAID disk devices.
* util/mkdevicemap.c (grub_putchar): New function.
(grub_getkey): New function.
(grub_refresh): New function.
(main): Set debug=all if -v -v is used.
we handle finding grub-mkimage. Default to finding grub-mkimage in
${bindir} with program_transform_name applied, and provide a
--grub-mkimage option to override this.
Remove broken Cygwin path conversion.
* util/misc.c: [__CYGWIN__] Add include and define.
[__CYGWIN__] (get_win32_path): Copy function from getroot.c, modify
for Cygwin 1.7.
(make_system_path_relative_to_its_root): Simplify loop, replace early
return by break.
[__CYGWIN__] Add conversion to win32 path.
Include "/" case in trailing slash removal.
mistake in r2156. Noticed by Anthony Fok.
* util/grub.d/10_kfreebsd.in (TEXTDOMAINDIR): Set to lowercased
@localedir@.
* util/grub.d/10_linux.in (TEXTDOMAINDIR): Likewise.
* util/getroot.c (find_root_device): Convert block device to
character device on NetBSD.
* util/probe.c (probe): Require character device on NetBSD.
* util/hostdisk.c: NetBSD specific headers.
(configure_device_driver): new function to tune device driver
parameters (currently only for NetBSD floppy driver).
(grub_util_biosdisk_open): NetBSD specific code (get disk size
via disklabel ioctl).
(open_device): call configure_device_driver on NetBSD.
(convert_system_partition_to_system_disk): NetBSD specific code.
(device_is_wholedisk): Likewise.
(grub_util_biosdisk_get_grub_dev): Likewise.
(make_device_name): Fixed a typo in bsd_part_str.
* configure.ac: check for opendisk() and getrawpartition() on
NetBSD and set LIBUTIL.
* Makefile.in: add LIBUTIL to LIBS.
* include/grub/script_sh.h (grub_script_cmdwhile): New struct.
(grub_script_create_cmdwhile): New function prototype.
(grub_script_execute_cmdwhile): New function prototype.
* script/execute.c (grub_script_execute_cmdwhile): New function.
* script/parser.y (command): New commands.
(whilecmd): New grammar rule.
(untilcmd): New grammar rule.
* script/script.c (grub_script_create_cmdwhile): New function.
* util/grub-script-check.c (grub_script_execute_cmdwhile): New
function.
* tests/grub_script_while1.in: New testcase.
* conf/tests.rmk: Rule for new testcase.
GRUB_DISTRIBUTOR for --class, to avoid problems if somebody puts
spaces in GRUB_DISTRIBUTOR.
* util/grub.d/10_kfreebsd.in: Likewise.
* util/grub.d/10_hurd.in: Likewise.
which is the case with --disabled-nls.
* include/grub/i18n.h: Use (defined(ENABLE_NLS)
&& ENABLE_NLS) instead of ENABLE_NLS in all #if preprocessor macros.
* util/misc.c: Likewise.
* util/mkisofs/mkisofs.c: Likewise.
* util/mkisofs/mkisofs.h: Likewise.
* util/hostdisk.c (struct grub_util_biosdisk_data): New structure.
(grub_util_biosdisk_open): Initialise disk->data.
(struct linux_partition_cache): New structure.
(linux_find_partition): Cache partition start positions; these are
expensive to compute on every read and write.
(open_device): Cache open file descriptor in disk->data, so that we
don't have to reopen it and flush the buffer cache for consecutive
operations on the same device.
(grub_util_biosdisk_close): New function.
(grub_util_biosdisk_dev): Set `close' member.
* conf/common.rmk (grub_probe_SOURCES): Add kern/list.c.
* conf/i386-efi.rmk (grub_setup_SOURCES): Likewise.
* conf/i386-pc.rmk (grub_setup_SOURCES): Likewise.
* conf/sparc64-ieee1275.rmk (grub_setup_SOURCES): Likewise.
* conf/x86_64-efi.rmk (grub_setup_SOURCES): Likewise.
* util/hostdisk.c (struct grub_util_biosdisk_data): New structure.
(grub_util_biosdisk_open): Initialise disk->data.
(struct linux_partition_cache): New structure.
(linux_find_partition): Cache partition start positions; these are
expensive to compute on every read and write.
(open_device): Cache open file descriptor in disk->data, so that we
don't have to reopen it and flush the buffer cache for consecutive
operations on the same device.
(grub_util_biosdisk_close): New function.
(grub_util_biosdisk_dev): Set `close' member.
* conf/common.rmk (grub_probe_SOURCES): Add kern/list.c.
* conf/i386-efi.rmk (grub_setup_SOURCES): Likewise.
* conf/i386-pc.rmk (grub_setup_SOURCES): Likewise.
* conf/sparc64-ieee1275.rmk (grub_setup_SOURCES): Likewise.
* conf/x86_64-efi.rmk (grub_setup_SOURCES): Likewise.
* util/grub-mkconfig.in (GRUB_SAVEDEFAULT): Export new variable.
* util/grub-mkconfig_lib.in (save_default_entry): Only save a new
default entry if GRUB_SAVEDEFAULT=true. This allows using
GRUB_DEFAULT=saved on its own to let grub-reboot work, without
saving a new default on every boot.
Fix warnings in grub-emu when compiling with maximum warning options.
* util/hostdisk.c (grub_util_biosdisk_get_grub_dev): Rename one instance
of disk to dsk to avoid shadowing.
Fix warnings in grub-emu when compiling with maximum warning options.
* util/grub-emu.c (ENABLE_RELOCATABLE): New definition.
(grub_arch_modules_addr): Return 0 and not NULL.
* util/misc.c (ENABLE_RELOCATABLE): New definition.
(xstrdup): USe newstr instead of dup.
* util/hostdisk.c (open_device): Don't use partition device when reading
before the partition.
(grub_util_biosdisk_read): Don't read from partition and before the
partition in single operation.
(grub_util_biosdisk_write): Don't write to partition and before the
partition in single operation.
* util/grub.d/10_linux.in: This script does not use any of the
contents of gettext.sh, only the external command `gettext', so stop
sourcing it. (Moreover, gettext.sh isn't necessarily installed in
the same prefix as GRUB.)
* util/grub.d/10_kfreebsd.in: Likewise.
* font/font.c: Include `grub/fontformat.h.
Remove font file format constants.
(grub_font_load): Use the new macros.
* include/grub/fontformat.h: New file.
* util/grub-mkfont.c: Include `grub/fontformat.c'.
(write_font_pf2): Use the new macros.
* conf/common.rmk (grub_mkdevicemap_SOURCES): Add kern/env.c,
kern/err.c, kern/list.c, and kern/misc.c.
* util/deviceiter.c [__linux__]: Define MINOR.
(grub_util_iterate_devices): Add support for DM-RAID disk devices.
* util/mkdevicemap.c (grub_putchar): New function.
(grub_getkey): New function.
(grub_refresh): New function.
(main): Set debug=all if -v -v is used.
* configure.ac: Check for Linux device-mapper support.
* util/hostdisk.c (device_is_mapped): New function.
(find_partition_start): New function, partly broken out from
linux_find_partition and grub_util_biosdisk_get_grub_dev but with
device-mapper support added.
(linux_find_partition): Use find_partition_start.
(convert_system_partition_to_system_disk): Add `st' argument.
Support Linux /dev/mapper/* devices if device-mapper support is
available; only DM-RAID devices are understood at present.
(find_system_device): Add `st' argument. Pass it to
convert_system_partition_to_system_disk.
(grub_util_biosdisk_get_grub_dev): Pass stat result to
find_system_device and convert_system_partition_to_system_disk. Use
find_partition_start.
* util/misc.c (make_system_path_relative_to_its_root): Change the work
around for handling "/" to the correct fix. Fix a memory leak. Use
xstrdup instead of strdup.
* kern/device.c (grub_device_iterate): Allocate new part_ent
structure based on sizeof (*p) rather than sizeof (p->next), to
account for structure padding.
* util/grub-probe.c (probe_raid_level): Return -1 immediately if
disk is NULL, which might happen for LVM physical volumes with no
LVM signature.
* font/font.c: Include `ascii.h'.
(ASCII_BITMAP_SIZE): New macro.
(ascii_font_glyph): Define.
(ascii_glyph_lookup): New function.
(grub_font_get_string_width): Change comment. If glyph not found, use
ascii_glyph_lookup.
(grub_font_get_glyph_with_fallback): If glyph not available returns
ascii_glyph_lookup.
* util/grub-mkfont.c (file_formats): New enum.
(options): Add `ascii-bitmaps' new option.
(usage): Add `asii-bitmaps' new option.
(write_font_ascii_bitmap): New function.
(write_font): Rename to ...
(write_font_p2): ... this. Remove print_glyphs call.
(main): Use file_format. Implement code for ranges if ascii-bitmaps is
used. Call print_glyphs.
* Makefile.in (pkgdata_DATA): Add `font/ascii.h'.
automatically activated because they're the only terminal that has been loaded.
This solution is temporary. In the future, all terminals should auto-enable,
but this is non-trivial due to resource conflict, and it shouldn't prevent
merge in trunk.
Make loader output a bit more user-friendly.
* util/grub.d/10_hurd.in: Print message indicating that GNU Mach
is being loaded. Likewise for the Hurd.
* util/grub.d/10_kfreebsd.in (kfreebsd_entry): Print message indicating
that kernel of FreeBSD ${version} is being loaded.
* loader/i386/linux.c (grub_cmd_linux): Move debug info to
grub_dprintf().
(grub_cmd_initrd): Likewise.
* util/grub.d/10_linux.in (linux_entry): Print message indicating
that Linux ${version} is being loaded. Likewise for initrd.
* util/mkisofs/write.c (padblock_write): Switch size and nmemb
arguments to fread so that we get a return value in bytes, rather
than something that will normally be rounded down to 0.
Adjust error handling to avoid producing garbage when size_t is not
the same size as long long.
2010-10-05 Colin Watson <cjwatson@ubuntu.com>
* util/grub.d/00_header.in: Define a "savedefault" function for use
in menu entries.
* util/grub-mkconfig_lib.in (save_default_entry): Use it.
2010-10-05 Colin Watson <cjwatson@ubuntu.com>
* util/grub-mkconfig_lib.in (save_default_entry): Only set
saved_entry if boot_once is unset.
* util/grub.d/00_header.in: Set boot_once to "true" if there was a
previous saved entry (i.e. grub-reboot).
* boot/i386/pc/diskboot.S: Fix inaccurate comment.
* util/i386/pc/grub-setup.c: Include `<assert.h>'.
(struct boot_blocklist): Move from here ...
* include/grub/i386/pc/boot.h [ASM_FILE]
(struct grub_boot_blocklist): ... to here. Update all users.
(setup): Only initialize `start' member of `first_block'
structure. Add assert() calls to verify the other members.
* util/i386/pc/grub-mkimage.c: Include `<assert.h>'.
(generate_image): Fix broken blocklist length initialization.
Add assert() call to verify blocklist `segment' field.
* genmk.rb (class SCRIPT): Use sed to substitute @pkglib_DATA@
with the actual contents of the correspondending make variable.
* util/grub-mkrescue.in (pkglib_DATA): New variable.
(process_input_dir): Copy all $pkglib_DATA files instead of explicitly
specifying `*.lst' and `efiemu??.o'
* util/mkisofs/msdos_partition.h: New file (based on
include/grub/msdos_partition.h).
* util/mkisofs/mkisofs.c (use_protective_msdos_label): New variable.
(OPTION_PROTECTIVE_MSDOS_LABEL): New macro.
(ld_options, main): Recognize --protective-msdos-label.
* util/mkisofs/mkisofs.h (use_protective_msdos_label): New declaration.
* util/mkisofs/write.c: Include `"msdos_partition.h"'.
(padblock_write): If `use_protective_msdos_label' is set, patch a
protective DOS-style label in the output image.
* util/grub-mkrescue.in: Use --protective-msdos-label.
* util/mkisofs/mkisofs.c (use_embedded_boot, boot_image_embed): New
variables.
(ld_options, main): Recognize `--embedded-boot'.
* util/mkisofs/mkisofs.h (use_embedded_boot, boot_image_embed): New
declarations.
* util/mkisofs/write.c (PADBLOCK_SIZE): New variable.
(padblock_size): Use `PADBLOCK_SIZE' instead of hardcoding 16.
(padblock_write): Likewise. Rewrite to support embedded boot image.
* util/grub-mkrescue.in: When building i386-pc images, embed core.img
for BIOS-based disk boot instead of only ElTorito.
* include/grub/types.h (UNUSED): Removed since it conflicts with
NetBSD headers. All users changed to direct __attribute__ ((unused)).
Reported by Grégoire Sutre.
* util/grub-mkconfig_lib.in: Don't set grub_probe or grub_mkrelpath
if they're already set. This resolves the conflict between my
grub-install change on 2009-10-06 and Felix' change on 2009-11-11,
fixing the --grub-probe option again.
* util/sparc64/ieee1275/grub-install.in: Revert the last piece of my
change on 2009-10-06, so that we now once again source
`${libdir}/grub/grub-mkconfig_lib' after options have been parsed.
* util/mkisofs/mkisofs.c (ld_options): Mark all `arg' strings as
translatable.
(usage): Translate `arg' strings using gettext().
Thanks to Jordi Mallach for the suggestion.
* util/grub.d/10_linux.in (linux_entry): Quote the arguments to
printf and print a newline after the menuentry header line.
* util/grub.d/10_kfreebsd.in (kfreebsd_entry): Likewise.
autoconf >= 2.60 support $(localedir).
* INSTALL: Note that autoconf 2.60 is required.
* configure.ac (AC_PREREQ): Bump to 2.60.
* util/grub.d/10_kfreebsd.in (TEXTDOMAINDIR): Set to lowercased @localedir@.
* util/grub.d/10_linux.in (TEXTDOMAINDIR): Likewise.
* util/grub-mkrelpath.c: New file.
* conf/common.rmk (bin_UTILITIES): Add grub-mkrelpath.
(grub_mkrelpath_SOURCES): New variable.
* include/grub/util/misc.h: New function prototype.
* util/misc.c (make_system_path_relative_to_its_root): New function.
* util/grub-mkconfig_lib.in (bindir): New variable.
(grub_mkrelpath): Likewise.
(make_system_path_relative_to_its_root): Use grub-mkrelpath.
* util/probe.c (probe): Make the file path relative to its root.
Change a info message to use the GRUB path. Enable again the
check if we can read the file with GRUB facilities.
* util/i386/pc/grub-setup.c (setup): Make core.img path relative
to its root.
* util/hostdisk.c: Include `<grub/i18n.h>'.
(find_grub_drive): Use ARRAY_SIZE for map size calculation.
(make_device_name): Rewrite using asprintf.
(convert_system_partition_to_system_disk): Replace 0 with NULL.
(find_system_device): If a device is not found, generate one just
by reusing the OS path name.
(read_device_map): Make it permissible for device.map not to exist.
* Makefile.in ($(srcdir)/po/$(PACKAGE).pot): Pass --keyword=N_ to
`$(XGETTEXT)'.
* include/grub/i18n.h (N_): New macro.
* util/mkisofs/mkisofs.h: Likewise.
* util/mkisofs/mkisofs.c (ld_options): Wrap all translatable strings
around N_().
(usage): Use gettext() to translate help strings when printing them.
* util/getroot.c [__GNU__]: Include <hurd.h>, <hurd/lookup.h>, and
<hurd/fs.h>
[__GNU__] (grub_guess_root_device): Call file_name_lookup and
file_get_storage_info to implement grub_guess_root_device.
* util/grub-mkrescue.in: Use source directory direcly (without copiing
or hardlinking it). Remove -J option, Joliet is not compatible with
multiple source directories.
2009-11-21 Robert Millan <rmh.grub@aybabtu.com>
* util/grub-mkrescue.in: Recognize `--override-directory' option.
(process_input_dir): New function. Process an arbitrary input
directory.
Misc adjustments to support both "override mode" and system-wide mode.
* gnulib/progname.h: Likewise.
* conf/i386-pc.rmk (grub_mkimage_SOURCES): Add `gnulib/progname.c'.
* util/i386/pc/grub-mkimage.c: Include `"progname.h"'.
(usage): Replace `progname' with `program_name'.
(main): Use set_program_name() for program name initialization.
Fix build for systems without error().
* gnulib/error.c: New file (imported from Gnulib).
* gnulib/error.h: Likewise.
* conf/common.rmk (grub_mkisofs_SOURCES): Add `gnulib/error.c'.
* util/mkisofs/mkisofs.c (program_name): Remove `static' qualifier
(this variable is now used by error()).
YYYY-MM-DD Carles Pina i Estany <carles@pina.cat>
* Makefile.in: Add uptrans target to help to update .pot file
* conf/common.rmk: Add grub-gettext_lib target, dependency and SOURCES, CFLAGS, LDFLAGS
* kern/misc.c: Define grub_gettext symbol and add implement grub_gettext_dummy function
* po/TODO: Temporary file with instructions of what Makefile.in will do
* po/ca.po: Catalan translation stub
* include/grub/misc.h: Define macro _(char *s). Declare grub_gettext_dummy and grub_gettext
* gettext/gettext.c: New file with gettext implementation
* normal/menu.c (print_message): add _( ) to some strings
* util/grub.d/10_linux.in: include grub-gettext_lib file. For the Linux menuentry, call eval_gettext
* util/grub.d/00_header.in: add locale_prefix and gettext locale detection and setting up the access to the mo directory
* util/grub-mkconfig_lib.in: add get_locale_lang
* util/grub-gettext_lib.in: new file
* util/mkisofs/eltorito.c (init_boot_catalog): Handle return code
of write calls (converting them to fwrite() if they aren't already).
(get_torito_desc): Likewise.
* util/mkisofs/rock.c (generate_rock_ridge_attributes): Likewise.
Support for El Torito without floppy emulation.
* util/mkisofs/eltorito.c: Include `<errno.h>'.
(init_boot_catalog): Improve error handling.
(get_torito_desc): Don't use floppy emulation unless requested by
user. Patch boot information table when requested via
`-boot-info-table'.
* util/mkisofs/iso9660.h (struct eltorito_boot_info): New struct.
* util/mkisofs/mkisofs.c (use_eltorito_emul_floppy)
(use_boot_info_table): New variables.
(OPTION_BOOT_INFO_TABLE, OPTION_NO_EMUL_BOOT)
(OPTION_ELTORITO_EMUL_FLOPPY): New macros.
(ld_options): Handle `-boot-info-table', `-no-emul-boot' and
`--eltorito-emul-floppy'.
(main): Handle `OPTION_BOOT_INFO_TABLE', `OPTION_NO_EMUL_BOOT'
and `OPTION_ELTORITO_EMUL_FLOPPY'.
* util/mkisofs/mkisofs.h (use_eltorito_emul_floppy)
(use_boot_info_table, get_731): New prototypes.
* util/mkisofs/write.c (get_731): New function.
Large file support for grub-mkisofs.
* conf/common.rmk (grub_mkisofs_CFLAGS): Add `-D_FILE_OFFSET_BITS=64'.
* util/mkisofs/mkisofs.c (next_extent, last_extent)
(session_start): Upgrade type to `uint64_t'. Update all users.
* util/mkisofs/mkisofs.h: Include `<stdint.h>'.
(struct directory_entry): Upgrade type of `starting_block' and
`size' to `uint64_t'. Update all users.
(struct deferred): Remove unused structure.
(xfwrite): Upgrade type of `count' and `size' to `uint64_t'.
Update all users.
* util/mkisofs/tree.c (stat_filter, lstat_filter): Return -1 when
file is larger than `UINT32_MAX'.
* util/mkisofs/write.c (xfwrite): Upgrade type of `count' and
`size' to `uint64_t'. Update all users. Fix handling of fwrite()
return value.
(struct deferred_write): Upgrade type of `extent' and `size' to
`uint64_t'. Update all users.
(last_extent_written): Upgrade type to `uint64_t'. Update all
users.
(write_one_file): Upgrade type of `count' and `size' to `uint64_t'.
Update all users. Upgrade type of `remain' to `int64_t' and
`use' to `size_t'. Use error() to handle fread() errors.
(write_files): Rely on write_one_file() rather than calling
xfwrite() directly.
* util//grub-mkconfig_lib.in (bindir): New variable.
(grub_mkrelpath): Likewise.
Properly set path variable. Use ${grub_mkrelpath} instead of
calling it directly.
2009-11-02 Felix Zielcke <fzielcke@z-51.de>
* util/probe.c (probe): Make the file path relative to its root.
Change a info message to use the GRUB path. Enable again the
check if we can read the file with GRUB facilities.
2009-11-01 Felix Zielcke <fzielcke@z-51.de>
* util/grub-mkrelpath.c: New file.
* conf/common.rmk (bin_UTILITIES): Add grub-mkrelpath.
(grub_mkrelpath_SOURCES): New variable.
* include/grub/util/misc.h: New function prototype.
* util/misc.c (make_system_path_relative_to_its_root): New function.
* util/grub-mkconfig_lib.in (make_system_path_relative_to_its_root):
Use grub-mkrelpath.
* util/grub-editenv.c (main): If only a command is given, use
DEFAULT_DIRECTORY "/" GRUB_ENVBLK_DEFCFG as a default file name.
(usage): FILENAME is now optional and has a default.
Improve grub-mkconfig performance when there are several menu
entries on a single filesystem.
* util/grub.d/10_linux.in (linux_entry): Cache the output of
prepare_grub_to_access_device.
* util/grub.d/10_kfreebsd.in (kfreebsd_entry): Likewise.
* util/grub.d/30_os-prober.in: Likewise.
* util/grub.d/10_freebsd.in: Remove.
* util/grub.d/10_kfreebsd.in: New file (based on 10_linux.in).
* configure.ac: Set host_kernel=kfreebsd for FreeBSD and GNU/kFreeBSD.
* util/grub.d/10_freebsd.in: Remove.
* util/grub.d/10_kfreebsd.in: New file (based on 10_linux.in).
* configure.ac: Set host_kernel=kfreebsd for FreeBSD and GNU/kFreeBSD.
Patch from Samuel Thibault <samuel.thibault@ens-lyon.org>
* docs/grub.cfg: Compensate for recent change in multiboot
loader (since 2009-08-14 it won't pass filename to payload).
* util/grub.d/10_hurd.in: Likewise.
Refer to kernel of FreeBSD "kFreeBSD" to avoid confusion between
the Operating System (FreeBSD) and its kernel (kernel of FreeBSD).
* loader/i386/bsd.c (grub_freebsd_boot): Read kernel environment
from "kFreeBSD" namespace (rather than "FreeBSD"). Update all
users.
(GRUB_MOD_INIT (bsd)): Rename "freebsd" command to "kfreebsd",
"openbsd" to "kopenbsd", "netbsd" to "knetbsd", "freebsd_loadenv"
to "kfreebsd_loadenv", "freebsd_module" to "kfreebsd_module",
and "freebsd_module_elf" to "kfreebsd_module_elf". Update all
users.
* util/i386/pc/grub-install.in: Source
${libdir}/grub/grub-mkconfig_lib before option processing, in order
that the --grub-probe option will work.
* util/sparc64/ieee1275/grub-install.in: Likewise.
* include/grub/kernel.h (struct grub_module_header): Remove
`grub_module_header_types'. Make `type' unsigned. Make `size'
32-bit on all platforms.
* util/elf/grub-mkimage.c (load_modules): Treat `type' as an
8-bit field. Use grub_host_to_target32() for `size'.
* util/i386/efi/grub-mkimage.c (make_mods_section): Likewise.
* util/i386/pc/grub-mkimage.c (generate_image): Likewise.
* util/sparc64/ieee1275/grub-mkimage.c (generate_image): Likewise.
* util/grub.d/30_os-prober.in: Don't throw away stderr from
os-prober. Under normal operation, it does not print anything to
stderr; if it does, we need to debug it, and throwing away stderr
makes that excessively difficult.
* util/grub-probe.c (probe): Comment out buggy codepath, which
was unexpectedly enabled by Colin Watson's 2009-09-02 fix. This
should be re-enabled after 1.97.
* util/grub.d/00_header.in: Move check for the video backend of
gfxterm from here ...
* util/grub-mkconfig.in: ... to here. Enable gfxterm if there's
a suitable video backend.
Rename *_partition_map to part_*
* partmap/acorn.c (grub_acorn_partition_map): Set name to 'part_acorn'.
* partmap/amiga.c (grub_amiga_partition_map): Set name to 'part_amiga'.
* partmap/apple.c (grub_apple_partition_map): Set name to 'part_apple'.
* partmap/gpt.c (grub_gpt_partition_map): Set name to 'part_gpt'.
All users updated.
* partmap/msdos.c (grub_msdos_partition_map): Set name to 'part_msdos'.
All users updated.
* partmap/sun.c (grub_sun_partition_map): Set name to 'part_sun'.
* util/grub-probe.c (probe_partmap): Don't transform partition name
to get module name.
* util/grub-dumpdevtree: Moved from here ...
* util/i386/efi/grub-dumpdevtree: ... to here.
(hexify): New function. Converts a string to its hex version.
Generate hex versions of "efi" and "device-properties" by calling
hexify() on the ASCII strings rather than by hardcoding numbers.
* util/grub-mkconfig_lib.in (version_test_numeric): Don't use
the "g" modifier in sed when the intention is to strip something
once. This fixes comparison of kernels with multiple dashes.
* util/grub-mkconfig_lib.in (font_path): Move the functionality
of it to ...
* util/grub-mkconfig.in: ... here. Prefer unicode.pf2 and
unifont.pf2 over ascii.pf2. Export LANG=C in case ascii.pf2 gets used.
2009-08-07 Robert Millan <rmh.grub@aybabtu.com>
* util/grub.d/10_linux.in (test_numeric): Moved from here ...
* util/grub-mkconfig_lib.in (version_test_numeric): ... to here.
Update all users.
* util/grub.d/10_linux.in (test_gt): Strip any basename prefix,
not just "vmlinu[zx]".
Moved from here ...
* util/grub-mkconfig_lib.in (version_test_gt): ... to here. Update
all users.
* util/grub.d/10_linux.in (find_latest): Moved from here ...
* util/grub-mkconfig_lib.in (version_find_latest): ... to here. Update
all users.
2009-08-07 Robert Millan <rmh.grub@aybabtu.com>
* util/grub.d/10_linux.in (test_numeric): Moved from here ...
* util/grub-mkconfig_lib.in (version_test_numeric): ... to here.
Update all users.
* util/grub.d/10_linux.in (test_gt): Strip any basename prefix,
not just "vmlinu[zx]".
Moved from here ...
* util/grub-mkconfig_lib.in (version_test_gt): ... to here. Update
all users.
* util/grub.d/10_linux.in (find_latest): Moved from here ...
* util/grub-mkconfig_lib.in (version_find_latest): ... to here. Update
all users.
* disk/lvm.c (grub_lvm_scan_device): Ignore extra copy of metadata.
Don't change pv->disk if it's already set.
* disk/raid.c (grub_raid_scan_device): Merge this function into ...
(grub_raid_register): ... here.
(grub_raid_rescan): Removed.
* include/grub/raid.h (grub_raid_rescan): Removed.
* util/grub-fstest.c: Remove include file <grub/raid.h>.
(fstest): Replace grub_raid_rescan with module fini function followed
by init function.
* util/grub-probe.c: Add include file <grub/raid.h>.
(probe_raid_level): New function.
(probe): Detect abstraction by walking the disk device, support two
level of abstraction (LVM on RAID) when detecting partition map.
* util/grub-mkconfig.in (GRUB_DISABLE_LINUX_RECOVERY): Export
variable.
* util/grub.d/10_linux.in: If GRUB_DISABLE_LINUX_RECOVERY is true,
don't write a menu entry for recovery mode.
* include/grub/i386/loader.h (grub_linux_prot_size)
(grub_linux_tmp_addr, grub_linux_real_addr)
(grub_linux_is_bzimage, grub_linux16_boot): Declare only on
GRUB_MACHINE_PCBIOS.
* util/i386/pc/grub-mkimage.c (compress_kernel): Move
common grub_util_info() call to ...
(generate_image): ... here.
Fix use of uninitialized memory, comparison of signed with
unsigned integers and memory leak.
Remove bogus module address message.
* util/elf/grub-mkimage.c (usage): Prefix each option line with two
spaces, for the benefit of help2man.
* util/i386/efi/grub-mkimage.c (usage): Likewise.
* boot/i386/pc/boot.S: Remove root_drive. Assert offset of
boot_drive_check by using GRUB_BOOT_MACHINE_DRIVE_CHECK. Don't
save %dx, we only need %dl and we never change it.
* boot/i386/pc/cdboot.S: Don't set the root drive.
* boot/i386/pc/pxeboot.S: Likewise.
* include/grub/i386/pc/boot.h: Remove
GRUB_BOOT_MACHINE_ROOT_DRIVE, adjust
GRUB_BOOT_MACHINE_DRIVE_CHECK.
* include/grub/i386/pc/kernel.h: Remove grub_root_drive.
* kern/i386/pc/init.c (make_install_device): Remove references
to grub_root_drive.
* kern/i386/pc/startup.S: Likewise.
* util/i386/pc/grub-setup.c (setup): Don't set root_drive.
* util/grub.d/30_os-prober.in: Fix a comment. Source
${libdir}/grub/grub-mkconfig_lib. Use prepare_grub_to_access_device
to set the root device. Place drivemap command in the generated
chain entry.
Use grub-macho2img when compiling with Apple's CC for PCBIOS machine
* conf/common.rmk (bin_UTILITIES): add (on false on condition)
grub-macho2img
(CLEANFILES): add grub-macho2img
(grub_macho2img_SOURCES): new variable
* kern/i386/pc/startup.S (bss_start): new variable
(bss_end): likewise
* genmk.rb: use grub-macho2img for *.img when compiled with Apple's CC
* util/grub-macho2img.c: new file
Fix wrong assumptions with grub-mkimage on EFI
* i386/efi/grub-mkimage.c (read_kernel_module): don't write prefox here
(relocate_addresses): consider both r_addend and value at offset
(make_mods_section): zerofill modinfo and header
(convert_elf): write prefix here
gfxpayload support
* commands/videotest.c (grub_cmd_videotest): use grub_video_set_mode
* include/grub/video.h (GRUB_VIDEO_MODE_TYPE_PURE_TEXT): new definition
(grub_video_setup): remove
(grub_video_set_mode): new prototype
* loader/i386/linux.c (DEFAULT_VIDEO_MODE): new definition
(vid_mode): remove
(linux_vesafb_res): compile only on PCBIOS
(grub_linux_boot): support gfxpayload
* loader/i386/pc/xnu.c (video_hook): new function
(grub_xnu_set_video): support gfxpayload
* term/gfxterm.c (DEFAULT_VIDEO_WIDTH): removed
(DEFAULT_VIDEO_HEIGHT): likewise
(DEFAULT_VIDEO_FLAGS): likewise
(DEFAULT_VIDEO_MODE): new definition
(video_hook): new function
(grub_gfxterm_init): use grub_video_set_mode
* util/grub.d/30_os-prober.in: remove explicit modesetting before
loading xnu
* video/video.c (grub_video_setup): removed
(grub_video_set_mode): new function based on grub_gfxterm_init and
grub_video_setup
Prevent GRUB from probing floppies during boot.
* conf/common.rmk (search_mod_CFLAGS): Use `-Werror -Wall'.
* commands/search.c (options): Add --no-floppy.
(search_fs, search_file, grub_cmd_search): Support --no-floppy.
* util/grub-mkconfig_lib.in (prepare_grub_to_access_device): Use
--no-floppy when searching for UUIDs.
* include/grub/kernel.h (grub_module_header_types): Add type
OBJ_TYPE_CONFIG.
* kern/main.c (grub_load_config): New function.
(grub_main): Call grub_load_config to read boot config.
* grub-mkimage (generate_image): New parameter config_path.
(options): New option --config.
(main): Parse --config option, and pass it to generate_image.
(grub_ofdisk_open): Use it to un-escape "," characters.
* kern/disk.c (find_part_sep): New.
(grub_disk_open): Use it to find the first non-escaped ','
character in the disk name.
* util/ieee1275/devicemap.c (escape_of_path): New.
(grub_util_emit_devicemap_entry): Use it.
* util/sparc64/ieee1275/grub-install.in: Update script to
strip partition specifiers properly by not triggering on
'\' escaped ',' characters.
* util/misc.c (grub_util_warn): New function. Emmits a warning
unconditionally.
* include/grub/util/misc.h (grub_util_warn): New declaration.
* util/i386/pc/grub-install.in: Understand --force and pass it down
to grub-setup.
* util/i386/pc/grub-setup.c (main): Understand --force and pass it
down to setup().
(setup): Improve error messages and add warnings when requested to
install in odd layouts. Refuse to install using blocklists unless
--force was set.
* conf/common.rmk (grub_script.tab.c): Change normal/parser.y to
script/sh/parser.y.
(pkglib_MODULES): Add normal.mod and sh.mod.
(normal_SOURCES): New variable.
(normal_mod_CFLAGS): Likewise.
(normal_mod_LDFLAGS): Likewise.
(sh_mod_SOURCES): Likewise.
(sh_mod_CFLAGS): Likewise.
(sh_mod_LDFLAGS): Likewise.
* conf/i386-pc.rmk (normal/lexer.c_DEPENDENCIES): Changed to
script/sh/lexer.c_DEPENDENCIES.
(kernel_img_SOURCES): Remove kern/rescue.c, and kern/reader.c,
kern/rescue_reader.c and kern/rescue_parser.c.
(kernel_img_HEADERS): Remove rescue.h, add reader.h.
(grub_emu_SOURCES): Change source files.
(pkglib_MODULES): Remove normal.mod.
(normal_SOURCES): Removed.
(normal_mod_CFLAGS): Likewise.
(normal_mod_LDFLAGS): Likewise.
* conf/i386-coreboot.rmk: Likewise.
* conf/i386-efi.rmk: Likewise.
* conf/i386-ieee1276.rmk: Likewise.
* conf/powerpc-ieee1275.rmk: Likewise.
* conf/sparc64-ieee1275.rmk: Likewise.
* conf/x86_64-efi.rmk: Likewise.
* include/grub/command.h (grub_command_execute): New inline function.
* include/grub/menu.h (grub_menu_entry): Removed commands field.
* include/grub/normal.h: Remove <grub/setjmp.h>.
(grub_fs_module_list): Moved to normal/autofs.c.
(grub_exit_env): Removed.
(grub_command_execute): Likewise.
(grub_normal_menu_addentry): Renamed to grub_menu_addentry, removed
parameter script.
(read_command_list): New function declaration.
(read_fs_list): Likewise.
* include/parser.h: Include <grub/reader.h>.
(grub_parser_split_cmdline): Change type of getline parameter.
(grub_parser): New structure.
(grub_parser_class): New variable.
(grub_parser_execute): New function declaration.
(grub_register_rescue_parser): Likewise.
(grub_parser_register): New inline function.
(grub_parser_unregister): Likewise.
(grub_parser_get_current): Likewise.
(grub_parser_set_current): Likewise.
* include/grub/reader.h: New file.
* kern/reader.c: Likewise.
* kern/rescue_parser.c: Likewise.
* kern/rescue_reader.c: Likewise.
* normal/autofs.c: Likewise.
* normal/dyncmd.c: Likewise.
* include/grub/rescue.h: Removed.
* normal/command.h: Likewise.
* include/grub/script.h: Moved to ...
* include/grub/script_sh.h: ... Moved here.
* normal/execute.c: Moved to ...
* script/sh/execute.c: ... Moved here.
* normal/function.c: Moved to ...
* script/sh/function.c: ... Moved here.
* normal/lexer.c: Moved to ...
* script/sh/lexer.c: ... Moved here.
* normal/parser.y: Moved to ...
* script/sh/parser.y: ... Moved here.
* normal/script.c: Moved to ...
* script/sh/script.c: ... Moved here.
* normal/main.c: Remove <grub/rescue.h> and <grub/script.h>, include
<grub/reader.h>.
(grub_exit_env): Removed.
(fs_module_list): Moved to normal/autofs.c.
(grub_file_getline): Don't handle comment here.
(free_menu): Skip removed field entry->commands.
(grub_normal_menu_addentry): Removed as grub_menu_entry, removed
script parameter.
(read_config_file): Removed nested parameter, change getline function.
(grub_enter_normal_mode): Removed.
(grub_dyncmd_dispatcher): Moved to normal/dyncmd.c.
(read_command_list): Likewise.
(autoload_fs_module): Moved to normal/autofs.c.
(read_fs_list): Likewise.
(reader_nested): New variable.
(grub_normal_execute): Run parser.sh to switch to sh parser.
(grub_cmd_rescue): Removed.
(cmd_normal): Removed.
(grub_cmd_normal): Unregister itself at the beginning. Don't register
rescue command.
(grub_cmdline_run): New function.
(grub_normal_reader_init): Likewise.
(grub_normal_read_line): Likewise.
(grub_env_write_pager): Likewise.
(cmdline): New variable.
(grub_normal_reader): Likewise.
(GRUB_MOD_INIT): Register normal reader and set as current, register
pager hook, register normal command with grub_register_command_prio,
so that it won't show up in command.lst.
(GRUB_MOD_FINI): Unregister normal reader, unhook pager, clear
grub_fs_autoload_hook.
* normal/menu.c: Remove <grub/script.h>, add <grub/command.h>.
(grub_menu_execute_entry): Replace grub_script_execute with
grub_parser_execute, change parameter to grub_command_execute.
* normal/menu_text.c: Remove <grub/script.h>.
* normal/menu_entry.c: Remove <grub/script.h>, add <grub/command.h>
and <grub/parser.h>.
(run): Change editor_getline to use new parser interface. Change
parameter to grub_command_execute.
* kern/main.c: Remove <grub/rescue.h>, include <grub/command.h>,
<grub/reader.h> and <grub/parser.h>.
(grub_load_normal_mode): Execute normal command.
(grub_main): Call grub_register_core_commands,
grub_register_rescue_parser and grub_register_rescue_reader, use
grub_reader_loop to enter input loop.
* kern/parser.c (grub_parser_spli_cmdline): Change type of getline
parameter.
(grub_parser_class): New variable.
(grub_parser_execute): New function.
* loader/i386/multiboot.c: Remove <grub/rescue.h>.
* loader/multiboot2.c: Likewise.
* loader/sparc64/ieee1275/linux.c: Likewise.
* util/grub-emu.c (read_command_list): New dummy function.
* util/sparc64/ieee1275/grub-setup.c: New file.
* util/sparc64/ieee1275/grub-ofpathname.c: New file.
* util/sparc64/ieee1275/grub-mkimage.c: New file.
* util/sparc64/ieee1275/grub-install.in: New file.
* util/ieee1275/ofpath.c: New file.
* util/ieee1275/devicemap.c: New file.
* util/devicemap.c: New file.
* util/deviceiter.c: New file.
* kern/sparc64/ieee1275/init.c: New file.
* include/grub/util/ofpath.h: New file.
* include/grub/util/deviceiter.h: New file.
* util/grub-mkdevicemap.c: Include deviceiter.h.
Implement using grub_util_emit_devicemap_entry and
grub_util_iterate_devices.
* conf/i386-corebook.rmk: Build util/deviceiter.c and
util/devicemap.c into grub-mkdevicemap
* conf/i386-efi.rmk: Likewise.
* conf/i386-ieee1275.rmk: Likewise.
* conf/i386-pc.rmk: Likewise.
* conf/powerpc-ieee1275.rmk: Likewise.
* conf/sparc64-ieee1275.rmk: Add rules to build boot block
images and installation utilities. Build kernel as image
instead of as elf binary. Use common rules as much as possible.
* include/grub/types.h: Rename ULONG_MAX to GRUB_ULONG_MAX and
LONG_MAX to GRUB_LONG_MAX. Introduce GRUB_LONG_MIN. Update all
users of ULONG_MAX, LONG_MAX and LONG_MIN to use the new
definitions.
* util/hostdisk.c [__FreeBSD__ || __FreeBSD_kernel__]: Include
<sys/param.h> and <sys/sysctl.h>.
(open_device) [__FreeBSD__ || __FreeBSD_kernel_]: Use sysctlgetbyname()
to add 0x10 to `kern.geom.debugflags' if it's not already set, before
opening the device and reset them afterwards.
* util/grub.d/10_freebsd.in: Don't exit if /boot/devices.hints
doestn't exist. Check also for /boot/kernel/kernel.gz. Print
`freebsd_loadenv' only when devices.hints exist.
* util/hostdisk.c [__FreeBSD_kernel__]: Include sys/disk.h.
(grub_util_biosdisk_open) [__FreeBSD_kernel__]: Add support for
GNU/kFreeBSD. Check if a device is a character device. Use
DIOCGMEDIASIZE to get the size.
(convert_system_partition_to_system_disk) [__FreeBSD_kernel__]: Add
support for GNU/kFreeBSD.
(grub_util_biosdisk_get_grub_dev) [__FreeBSD_kernel__]: Check if OS_DEV
is a character device instead of a block device. Add support for
FreeBSD device names.
* util/getroot.c (find_root_device) [__FreeBSD_kernel__]: Check if ENT
is a character device instead of a block device.
* util/grub-probe.c (probe) [__FreeBSD_kernel__]: Check if DEVICE_NAME
is a character device instead of a block device.
* util/hostdisk.c [__FreeBSD__]: Include sys/disk.h.
(grub_util_biosdisk_open) [__FreeBSD__]: Add support for
FreeBSD. Check if a device is a character device. Use
DIOCGMEDIASIZE to get the size.
(convert_system_partition_to_system_disk) [__FreeBSD__]: Add
support for FreeBSD.
(grub_util_biosdisk_get_grub_dev) [__FreeBSD__]: Check if OS_DEV
is a character device instead of a block device. Add support for
FreeBSD device names.
* util/getroot.c (find_root_device) [__FreeBSD__]: Check if ENT is
a character device instead of a block device.
(grub_util_check_char_device): New function.
* util/grub-probe.c (probe) [__FreeBSD__]: Check if DEVICE_NAME is
a character device instead of a block device.
* include/grub/util/getroot.h (grub_util_check_char_device): New
prototype.
Support for mtime and further expandability of dir command
* include/grub/lib/datetime.h: moved to ...
* include/grub/datetime.h: ... moved here and added
declaration of grub_unixtime2datetime. All users updated
* include/grub/fs.h: new syntax for dir and mtime functionin
struct grub_fs
* include/grub/fshelp.h: new declarations of GRUB_FSHELP_TYPE_MASK
and GRUB_FSHELP_FLAGS_MASK
* commands/ls.c (grub_ls_list_files): Write mtime in long format
* fs/ext2.c (grub_ext2_dir): use new dir syntax and supply mtime
(grub_ext2_mtime): new function
* fs/hfsplus.c (grub_hfsplus_dir): use new dir syntax and supply mtime
(grub_hfsplus_mtime): new function
* fs/ufs.c (GRUB_UFS_ATTR_TYPE): new definition
(GRUB_UFS_ATTR_FILE): likewise
(GRUB_UFS_ATTR_LNK): likewise
(struct grub_ufs_sblock): new fields mtime
(grub_ufs_read_inode): new parameter to read inode to a separate buffer
all users updated
(grub_ufs_dir): mtime support
(grub_ufs_mtime): new function
* fs/affs.c (grub_affs_dir): use new dir syntax
* fs/afs.c (grub_afs_dir): likewise
* fs/cpio.c (grub_cpio_dir): likewise
* fs/fat.c (grub_fat_find_dir): likewise
* fs/hfs.c (grub_hfs_dir): likewise
* fs/iso9660.c (grub_iso9660_dir): likewise
* fs/jfs.c (grub_jfs_dir): likewise
* fs/minix.c (grub_minix_dir): likewise
* fs/ntfs.c (grub_ntfs_dir): likewise
* fs/reiserfs.c (grub_reiserfs_dir): likewise
* fs/sfs.c (grub_sfs_dir): likewise
* fs/xfs.c (grub_xfs_dir): likewise
* util/hostfs.c (grub_hostfs_dir): likewise
* lib/datetime.c: moved to ...
* normal/datetime.c: ... moved here
(grub_unixtime2datetime): new function
* kern/rescue.c (grub_rescue_print_files): use new dir syntax
* normal/completition.c (iterate_dir): use new dir syntax
* normal/misc.c (grub_normal_print_device_info): tell the
last modification time of a volume
* kern/fs.c (grub_fs_probe): updated dummy function to use new syntax
* conf/common.rmk: added lib/datetime.c to ls.mod
* conf/i386-coreboot.rmk (grub_emu_SOURCES): add normal/datetime.c
(normal_mod_SOURCES): likewise
(datetime_mod_SOURCES): Removed lib/datetime.c
* conf/i386-efi.rmk: likewise
* conf/i386-ieee1275.rmk: likewise
* conf/i386-pc.rmk: likewise
* conf/powerpc-ieee1275.rmk: likewise
* conf/sparc64-ieee1275.rmk: likewise
* conf/x86_64-efi.rmk: likewise
Make the format of Environment Block plain text. The boot loader
part is not tested well yet.
* util/grub-editenv.c (DEFAULT_ENVBLK_SIZE): New macro.
(buffer): Removed.
(envblk): Likewise.
(usage): Remove "info" and "clear". Add "unset". Update the
description of "set", as this does not delete variables any
longer.
(create_envblk_file): Complete rewrite.
(open_envblk_file): Likewise.
(cmd_info): Removed.
(cmd_list): Likewise.
(cmd_set): Likewise.
(cmd_clear): Likewise.
(list_variables): New function.
(write_envblk): Likewise.
(set_variables): Likewise.
(unset_variables): Likewise.
(main): Complete rewrite.
* commands/loadenv.c (buffer): Removed.
(envblk): Likewise.
(open_envblk_file): New function.
(read_envblk_file): Complete rewrite.
(grub_cmd_load_env): Likewise.
(grub_cmd_list_env): Likewise.
(struct blocklist): New struct.
(free_blocklists): New function.
(check_blocklists): Likewise.
(write_blocklists): Likewise.
(grub_cmd_save_env): Complete rewrite.
* include/grub/lib/envblk.h (GRUB_ENVBLK_SIGNATURE): Replaced with
a plain text signature.
(GRUB_ENVBLK_MAXLEN): Removed.
(struct grub_envblk): Complete rewrite.
(grub_envblk_find): Removed.
(grub_envblk_insert): Likewise.
(grub_envblk_open): New prototype.
(grub_envblk_set): Likewise.
(grub_envblk_delete): Put const to VALUE.
(grub_envblk_iterate): Put const to NAME and VALUE.
(grub_envblk_close): New prototype.
(grub_envblk_buffer): New inline function.
(grub_envblk_size): Likewise.
* lib/envblk.c: Include grub/mm.h.
(grub_env_find): Removed.
(grub_envblk_open): New function.
(grub_envblk_close): Likewise.
(escaped_value_len): Likewise.
(find_next_line): Likewise.
(grub_envblk_insert): Removed.
(grub_envblk_set): New function.
(grub_envblk_delete): Complete rewrite.
(grub_envblk_iterate): Likewise.
* util/hostdisk.c (read_device_map): Use grub_util_get_disk_size
instead of stat in mingw environment.
* util/misc.c (grub_millisleep): Use Sleep in mingw environment.
* aclocal.m4 (grub_CHECK_LINK_DIR): New function.
* configure.ac: Use grub_CHECK_LINK_DIR to determine whether to use
AC_CONFIG_LINKS.
* conf/i386-coreboot.rmk (sbin_SCRIPTS): Add `grub-install'.
(grub_install_SOURCES): New variable.
* util/i386/pc/grub-install.in: Add a few condition checks to make it
usable on coreboot.
* util/grub-fstest.c (grub_term_get_current_input): Change return type
to `grub_term_input_t'.
(grub_term_get_current_output): Change return type to
`grub_term_output_t'.
* term/i386/pc/vesafb.c (grub_vesafb_term): Change type to
`struct grub_term_output'. Remove `.checkkey' and `.getkey'
members. Update all users.
* util/console.c (grub_ncurses_term): Split in ...
(grub_ncurses_term_input): ... this, and ...
(grub_ncurses_term_output): ... this. Update all users.
Modularize at_keyboard.mod:
* conf/i386.rmk (pkglib_MODULES): Add `at_keyboard.mod'.
(at_keyboard_mod_SOURCES, at_keyboard_mod_CFLAGS)
(at_keyboard_mod_LDFLAGS): New variables.
Actual terminal split:
* include/grub/term.h (struct grub_term): Split in ...
(struct grub_term_input): ... this, and ...
(struct grub_term_output): ... this. Update all users.
(grub_term_set_current): Split in ...
(grub_term_set_current_input): ... this, and ...
(grub_term_set_current_output): ... this.
(grub_term_get_current): Split in ...
(grub_term_get_current_input): ... this, and ...
(grub_term_get_current_output): ... this.
(grub_term_register): Split in ...
(grub_term_register_input): ... this, and ...
(grub_term_register_output): ... this.
(grub_term_unregister): Split in ...
(grub_term_unregister_input): ... this, and ...
(grub_term_unregister_output): ... this.
(grub_term_iterate): Split in ...
(grub_term_iterate_input): ... this, and ...
(grub_term_iterate_output): ... this.
* kern/term.c (grub_term_list): Split in ...
(grub_term_list_input): ... this, and ...
(grub_term_list_output): ... this. Update all users.
(grub_cur_term): Split in ...
(grub_cur_term_input): ... this, and ...
(grub_cur_term_output): ... this. Update all users.
(grub_term_set_current): Split in ...
(grub_term_set_current_input): ... this, and ...
(grub_term_set_current_output): ... this.
(grub_term_get_current): Split in ...
(grub_term_get_current_input): ... this, and ...
(grub_term_get_current_output): ... this.
(grub_term_register): Split in ...
(grub_term_register_input): ... this, and ...
(grub_term_register_output): ... this.
(grub_term_unregister): Split in ...
(grub_term_unregister_input): ... this, and ...
(grub_term_unregister_output): ... this.
(grub_term_iterate): Split in ...
(grub_term_iterate_input): ... this, and ...
(grub_term_iterate_output): ... this.
* kern/misc.c (grub_abort): Split use of grub_term_get_current() into
a check for input and one for output (and only attempt to get keys
from user when input works).
* util/grub-probe.c (grub_term_get_current): Split in ...
(grub_term_get_current_input): ... this, and ...
(grub_term_get_current_output): ... this.
* util/grub-fstest.c: Likewise.
* util/i386/pc/grub-setup.c: Likewise.
* util/grub-editenv.c: Likewise.
Portability adjustments:
* conf/i386-ieee1275.rmk (kernel_elf_SOURCES): Remove
`term/i386/pc/at_keyboard.c'.
* kern/ieee1275/init.c [__i386__] (grub_machine_init): Remove call to
grub_keyboard_controller_init() (now handled by terminal .init).
* kern/i386/coreboot/init.c (grub_machine_init): Add call to
grub_at_keyboard_init().
* include/grub/i386/ieee1275/console.h (grub_keyboard_controller_init)
(grub_console_checkkey, grub_console_getkey): Remove (now provided by
at_keyboard.mod via input terminal interface).
* include/grub/i386/coreboot/console.h: Convert into a stub for
`<grub/i386/pc/console.h>'.
Migrate full terminals to new API:
* term/efi/console.c (grub_console_term): Split into ...
(grub_console_term_input): ... this, and ...
(grub_console_term_output): ... this. Update all users.
* term/ieee1275/ofconsole.c: Remove __i386__ hack.
(grub_ofconsole_init): Split into ...
(grub_ofconsole_init_input): ... this, and ...
(grub_ofconsole_init_output): ... this.
(grub_ofconsole_term): Split into ...
(grub_ofconsole_term_input): ... this, and ...
(grub_ofconsole_term_output): ... this. Update all users.
* term/i386/pc/serial.c (grub_serial_term): Split into ...
(grub_serial_term_input): ... this, and ...
(grub_serial_term_output): ... this. Update all users.
* term/i386/pc/console.c (grub_console_term): Split into ...
(grub_console_term_input): ... this, and ...
(grub_console_term_output): ... this. Update all users.
(grub_console_term_input): Only enable it on PC/BIOS platform.
(grub_console_init): Remove grub_keyboard_controller_init() call.
Migrate input terminals to new API:
* term/i386/pc/at_keyboard.c: Replace `cpu' and `machine' with
`i386' and `i386/pc' to enable build on x86_64 (this driver is
i386-specific anyway).
(grub_console_checkkey): Rename to ...
(grub_at_keyboard_checkkey): ... this. Static-ize. Update all
users.
(grub_keyboard_controller_orig): New variable.
(grub_console_getkey): Rename to ...
(grub_at_keyboard_getkey): ... this. Static-ize. Update all
users.
(grub_keyboard_controller_init): Static-ize. Save original
controller value so that it can be restored ...
(grub_keyboard_controller_fini): ... here (new function).
(grub_at_keyboard_term): New structure.
(GRUB_MOD_INIT(at_keyboard), GRUB_MOD_FINI(at_keyboard)): New
functions.
Migrate output terminals to new API:
* term/i386/pc/vga.c (grub_vga_term): Change type to
`struct grub_term_output'. Remove `.checkkey' and `.getkey'
members. Update all users.
* term/gfxterm.c (grub_video_term): Change type to
`struct grub_term_output'. Remove `.checkkey' and `.getkey'
members. Update all users.
* include/grub/i386/pc/console.h (grub_console_checkkey)
(grub_console_getkey): Do not export (no longer needed by gfxterm,
etc).
Migrate `terminal' command and userland tools to new API:
* commands/terminal.c (grub_cmd_terminal): Split into ...
(grub_cmd_terminal_input): ... this, and ...
(grub_cmd_terminal_output): ... this.
(GRUB_MOD_INIT(terminal)): Split `terminal' command in two commands:
`terminal_input' and `terminal_output'.
* util/grub.d/00_header.in: Adjust `terminal' calls to new
`terminal_input' / `terminal_output' API.
* util/grub-mkconfig.in: Export ${GRUB_TERMINAL_INPUT} and
${GRUB_TERMINAL_OUTPUT} instead of ${GRUB_TERMINAL} (and if user
provided ${GRUB_TERMINAL}, convert it).
* util/update-grub_lib.in: Copy to ...
* util/grub-mkconfig_lib.in: ... this. Update all users.
* util/update-grub_lib.in: Make it a stub to `grub-mkconfigig_lib.in'.
* util/update-grub.in: Rename to ...
* util/grub-mkconfig.in: ... this. Update all users. Remove `-y'
option. Add `--output' option to allow users to specify the generated
configuration file. Default to stdout.
(update_grub_dir): Rename to ...
(grub_mkconfig_dir): ... this.
(grub_cfg): Default to an empty string.
* conf/common.rmk (update-grub): Rename to ...
(grub-mkconfig): ... this.
(update-grub_lib): Copy to ...
(grub-mkconfig_lib): ... this.
(update-grub_SCRIPTS): Copy to ...
(grub-mkconfig_SCRIPTS): ... this. Update all users.
(update-grub_DATA): Rename to ...
(grub-mkconfig_DATA): ... this.
* util/hostdisk.c (open_device): Replace a grub_util_info() call
with grub_dprintf("hostdisk", ...), as it was so verbose that it
clobbered useful information.
* util/getroot.c: Include <config.h>.
(grub_util_get_grub_dev): Rewrite to use asprintf for mdraid devices,
add support for /dev/md/N devices and handle LVM double dash escaping.
* configure.ac: Change host_os to cygwin for mingw.
(asprintf): New check for function.
* include/grub/symbol.h: Replace #ifndef __CYGWIN__ with
#if ! defined (__CYGWIN__) && ! defined (__MINGW32__).
* include/grub/util/misc.h: #include <config.h> and <grub/types.h>,
declear asprintf if HAVE_ASPRINTF is not set, declear fseeko, ftello,
sync, sleep and grub_util_get_disk_size for mingw.
* util/biosdisk.c (grub_util_biosdisk_open): Use grub_util_get_disk_size
to get size in mingw.
(open_device): Use flag O_BINARY if it's defined.
(find_root_device): Add dummy code for mingw.
* util/grub-mkdevicemap.c (get_floppy_disk_name): Return 0 for mingw.
(get_ide_disk_name): Return //./PHYSICALDRIVE%d for mingw.
(get_scsi_disk_name): Return 0 for mingw.
* util/hostfs.c: #include <grub/util/misc.h>.
(grub_hostfs_open): Use "rb" flag to open file, use
grub_util_get_disk_size to get disk size for mingw.
* util/misc.c: #include <windows.h> and <winioctl.h> in mingw.
(asprintf): New function if HAVE_ASPRINTF is not set.
(sync): New function for mingw.
(sleep): Likewise.
(grub_util_get_disk_size): Likewise.
Change find_grub_drive() syntax so it doesn't prevent it from
detecting NULL names as errors.
* util/biosdisk.c (find_grub_drive): Move free slot search code
from here ...
(find_free_slot): ... to here.
(read_device_map): Use find_free_slot() to search for free slots.
* conf/common.rmk (grub_probe_SOURCES): Add disk/mdraid_linux.c.
(grub_fstest_SOURCES): Add disk/raid5_recover.c, disk/raid6_recover.c,
disk/mdraid_linux.c and disk/dmraid_nvidia.c and lib/crc.c.
(pkglib_MODULES): Add raid5rec.mod, raid6rec.mod, mdraid.mod and
dm_nv.mod.
(raid5rec_mod_SOURCES): New macro.
(raid5rec_mod_CFLAGS): Likewise.
(raid5rec_mod_LDFLAGS): Likewise.
(raid6rec_mod_SOURCES): Likewise.
(raid6rec_mod_CFLAGS): Likewise.
(raid6rec_mod_LDFLAGS): Likewise.
(mdraid_mod_SOURCES): Likewise.
(mdraid_mod_CFLAGS): Likewise.
(mdraid_mod_LDFLAGS): Likewise.
(dm_nv_mod_SOURCES): Likewise.
(dm_nv_mod_CFLAGS): Likewise.
(dm_nv_mod_LDFLAGS): Likewise.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add disk/mdraid_linux.c.
(grub_emu_SOURCES): Add disk/raid5_recover.c, disk/raid6_recover.c,
disk/mdraid_linux.c and disk/dmraid_nvidia.c.
* conf/i386-coreboot.rmk (grub_emu_SOURCES): Add disk/raid5_recover.c,
disk/raid6_recover.c, disk/mdraid_linux.c and disk/dmraid_nvidia.c.
* conf/i386-efi.rmk (grub_emu_SOURCES): Likewise.
* conf/x86_64-efi.rmk (grub_emu_SOURCES): Likewise.
* conf/i386-ieee1275.rmk (grub_emu_SOURCES): Likewise.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Likewise.
* disk/raid5_recover.c: New file.
* disk/raid6_recover.c: Likewise.
* disk/mdraid_linux.c: Likewise.
* disk/dmraid_nvidia.c: Likewise.
* disk/i386/pc/biosdisk.c: Set total_sectors of cdrom device to
ULONG_MAX.
* disk/raid.c (grub_raid_open): Use the size of the smallest disk to
calculate the size of raid device.
(grub_raid_read): Simplify raid0 code. Support raid4, raid6 and four
different layout of raid5.
(grub_raid_scan_device): Remove code specific to mdraid.
(grub_raid_list): New variable.
(free_array): New function.
(grub_raid_register): Likewise.
(grub_raid_unregister): Likewise.
(grub_raid_rescan): Likewise.
(GRUB_MOD_INIT): Don't iterate device here.
(GRUB_MOD_FINI): Use free_array to release resource.
* include/grub/raid.h: Remove macro and structure specific to mdraid.
(grub_raid5_recover_func_t): New function variable type.
(grub_raid6_recover_func_t): Likewise.
(grub_raid5_recover_func): New variable.
(grub_raid6_recover_func): Likewise.
(grub_raid_register): New function.
(grub_raid_unregister): Likewise.
(grub_raid_rescan): Likewise.
(grub_raid_block_xor): Likewise.
* util/grub-fstest.c: Add #include <grub/raid.h> and <grub/lib/crc.h>.
(CMD_CRC): New macro.
(part): Removed.
(read_file): Handle device as well as file.
(cmd_crc): New function.
(fstest): Handle multiple disks.
(options): Remove part, raw and long, add root and diskcount.
(usage): Add crc, remove -p, -r, -l, add -r and -c.
(main): Find the first non option entry and ignore subsequence options,
add handling for the new options, support multiple disks.
* util/grub-probe.c (probe): Add mdraid to abstraction_name.
* include/grub/err.h (grub_err_printf): New function prototype.
* util/misc.c (grub_err_printf): New function.
* kern/misc.c [! GRUB_UTIL] (grub_err_printf): New alias for
grub_printf.
* kern/err.c (grub_print_error): Use grub_err_printf.
* kern/disk.c: Replace `<grub/machine/time.h>' with `<grub/time.h>'.
(grub_last_time): Change type to grub_uint64_t.
(grub_disk_open): Migrate code from to using grub_get_time_ms().
(grub_disk_close): Likewise.
* normal/menu.c: Replace `<grub/machine/time.h>' with `<grub/time.h>'.
(run_menu): Migrate code from to using grub_get_time_ms().
* util/misc.c (grub_get_time_ms): New function.
* util/console.c (grub_console_cur_color): New variable.
(grub_console_standard_color): Likewise.
(grub_console_normal_color): Likewise.
(grub_console_highlight_color): Likewise.
(color_map): Likewise.
(use_color): Likewise.
(NUM_COLORS): New macro.
(grub_ncurses_setcolorstate): Handle color properly.
(grub_ncurses_setcolor): Don't change color here, just remember the
settings, color will be set in grub_ncurses_setcolorstate.
(grub_ncurses_getcolor): New function.
(grub_ncurses_init): Initialize color pairs.
(grub_ncurses_term): New member grub_ncurses_getcolor.
* util/grub.d/00_header.in: Be platform-agnostic. Probe for existence
of modules instead of assuming which platform provides what.
* util/update-grub.in: Likewise.
* disk/memdisk.c (memdisk_size): Don't initialize.
(GRUB_MOD_INIT(memdisk)): Find memdisk using grub_module_iterate().
* include/grub/i386/pc/kernel.h
(GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE): Remove macro.
(GRUB_KERNEL_MACHINE_PREFIX, GRUB_KERNEL_MACHINE_DATA_END): Shift.
(grub_memdisk_image_size, grub_arch_memdisk_addr)
(grub_arch_memdisk_size): Remove.
* include/grub/kernel.h (struct grub_module_header): Remove `offset'
field (was only used to transfer a constant). Add `type' field to
support multiple module types.
(grub_module_iterate): New function.
* kern/device.c (grub_device_open): Do not hide error messages
when grub_disk_open() fails. Use grub_print_error() instead.
* kern/i386/pc/init.c (grub_arch_modules_addr)
(grub_arch_memdisk_size): Remove functions.
(grub_arch_modules_addr): Return the module address in high memory
(now that it isn't copied anymore).
* kern/i386/pc/startup.S (grub_memdisk_image_size): Remove variable.
(codestart): Don't add grub_memdisk_image_size to %ecx in LZMA
decompression routine (grub_total_module_size already includes that
now). Don't copy modules back to low memory.
* kern/main.c: Include `<grub/mm.h>'.
(grub_load_modules): Split out (and use) ...
(grub_module_iterate): ... this function, which iterates through
module objects and runs a hook.
Comment out grub_mm_init_region() call, as it would cause non-ELF
modules to be overwritten.
* util/i386/pc/grub-mkimage.c (generate_image): Instead of appending
the memdisk image in its own region, make it part of the module list.
* util/elf/grub-mkimage.c (options): Add "memdisk"|'m' option.
(main): Parse --memdisk|-m option, and pass user-provided path as
parameter to generate_image().
(add_segments): Pass `memdisk_path' down to load_modules().
(load_modules): Embed memdisk image in module section when requested.
* util/i386/efi/grub-mkimage.c (make_mods_section): Initialize
`header.type' instead of `header.offset'.
* conf/powerpc-ieee1275.rmk (pkglib_MODULES): Add `memdisk.mod'.
(memdisk_mod_SOURCES, memdisk_mod_CFLAGS)
(memdisk_mod_LDFLAGS): New variables.
* conf/i386-coreboot.rmk: Likewise.
* conf/i386-ieee1275.rmk: Likewise.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_DATA_END):
Increase from 0x50 to 0x60.
* util/i386/pc/grub-install.in: Detect cross-disk installs, and
use UUIDs to identify the root drive for them. If that's not
possible, abort.
* util/i386/pc/grub-setup.c (setup): Do not special-case, or even
check, for cross-disk installs.
* kern/ieee1275/init.c (grub_machine_set_prefix): If `grub_prefix'
is non-empty, use it to set the `prefix' environment variable instead
of the usual approach.
* kern/i386/linuxbios/init.c (make_install_device): Remove function.
(grub_machine_set_prefix): Use `grub_prefix' to set the `prefix'
environment variable instead of dummy make_install_device().
* kern/i386/ieee1275/startup.S: Include `<grub/machine/kernel.h>'.
(start): Insert a data section, with `grub_prefix' variable.
* kern/i386/linuxbios/startup.S: Likewise.
* include/grub/powerpc/ieee1275/kernel.h [!ASM_FILE] (grub_prefix):
New variable reference.
* include/grub/i386/ieee1275/kernel.h (GRUB_KERNEL_MACHINE_PREFIX):
New macro. Defines offset of `grub_prefix' within startup.S (relative
to `start').
(GRUB_KERNEL_MACHINE_DATA_END): New macro. Defines the end of data
section within startup.S (relative to `start').
* include/grub/i386/coreboot/kernel.h: Likewise.
* util/elf/grub-mkimage.c (add_segments): Receive `prefix' parameter.
Overwrite grub_prefix with its contents, at the beginning of the
first segment.
(main): Understand -p|--prefix.
* util/update-grub.in: Add a check for admin
group on Cygwin.
Remove old `grub.cfg.new' before creation.
Add `-f' to `mv' to handle the different filesystem
semantics of Windows.
* util/getroot.c (find_root_device): Skip devices that match
/dev/dm-[0-9]. This lets the real device be found for any type of
abstraction (LVM, EVMS, RAID..).
(grub_guess_root_device): Do not traverse /dev/mapper (for LVM)
and /dev/evms (for EVMS) before traversing /dev. If a /dev/dm-[0-9]
device is found first, find_root_device() will now skip it.
* util/i386/pc/grub-install.in: If `--debug' is specified,
pass `--verbose' to grub-setup.
Abort script if make_system_path_relative_to_its_root() fails.
* common.rmk (bin_UTILITIES): Add grub-pe2elf.
(grub_pe2elf_SOURCES): New macro.
(CLEANFILES): Add grub-pe2elf.
* include/grub/efi/pe32.h (GRUB_PE32_SCN_ALIGN_1BYTES): New constant.
(GRUB_PE32_SCN_ALIGN_2BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_4BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_8BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_16BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_32BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_64BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_SHIFT): Likewise.
(GRUB_PE32_SCN_ALIGN_MASK): Likewise.
(GRUB_PE32_SYM_CLASS_EXTERNAL): Likewise.
(GRUB_PE32_SYM_CLASS_STATIC): Likewise.
(GRUB_PE32_SYM_CLASS_FILE): Likewise.
(GRUB_PE32_DT_FUNCTION): Likewise.
(GRUB_PE32_REL_I386_DIR32): Likewise.
(GRUB_PE32_REL_I386_REL32): Likewise.
(grub_pe32_symbol): New structure.
(grub_pe32_reloc): Likewise.
* util/grub-pe2elf.c: New file.
* configure.ac: Set TARGET_OBJ2ELF if host os is cygwin. Don't test for
start symbol in non pc platform.
* genmk.rb: Use TARGET_OBJ2ELF to convert native object format to elf.
The following patches are from Christian Franke.
* include/grub/dl.h: Remove .previous, gas supports this only
for ELF format.
* include/grub/symbol.h [__CYGWIN__] (#define FUNCTION/VARIABLE):
Remove .type, gas supports this only for ELF format.
* kern/dl.c (grub_dl_resolve_dependencies): Add check for trailing
nullbytes in symbol table. This fixes an infinite loop if table is
zero filled.
* Makefile.in: Add autoconf replacements TARGET_IMG_LDSCRIPT,
TARGET_IMG_LDFLAGS and EXEEXT.
* aclocal.m4 (grub_PROG_OBJCOPY_ABSOLUTE): Replace -Wl,-N by
TARGET_IMG_LDFLAGS_AC.
(grub_CHECK_STACK_ARG_PROBE): New function.
* conf/i386-pc.rmk: Replace -Wl,-N by TARGET_IMG_LDFLAGS.
* conf/i386-pc-cygwin-ld-img.sc: New linker script.
* configure.ac: Add check for linker script "conf/${target}-img-ld.c"
to set TARGET_IMG_LD* accordingly.
Add check for Cygwin to set TARGET_MOD_OBJCOPY accordingly.
Add call to grub_CHECK_STACK_ARG_PROBE.
Use TARGET_IMG_LDFLAGS to check start, bss_start, end symbols.
* genkernsyms.sh.in: Handle HAVE_ASM_USCORE case.
* genmk.rb: Add EXEEXT to CLEANFILES.
* Makefile.in (UNICODE_ARROWS, UNICODE_LINES): New variables (they
define the codes for arrows and lines used for the menu).
(ascii.pff): Generate fonts for $(UNICODE_ARROWS) and $(UNICODE_LINES)
as well.
* util/update-grub_lib.in (font_path): Prefer ascii.pff over complete
fonts, because the latter are too slow.
* util/i386/efi/grub-mkimage.c (get_target_address): Return a
pointer, not an integer. This fixes a warning and prevents
precision loss on 64-bit systems.
(relocate_addresses): Remove unneeded cast.
* util/grub.d/40_custom.in: New file. Example on how to add custom
entries to /etc/grub.d.
* conf/common.rmk (%, update-grub_SCRIPTS, CLEANFILES): Install
40_custom (implicitly, by merging all the grub.d rules).
This fixes a performance issue when pc & gpt partmap iterators
didn't abort iteration even after our hook found what it was
looking for (often causing expensive probes of non-existant drives).
Some callers relied on previous buggy behaviour, since they would
rise an error when their own hooks caused early abortion of its
iteration.
* kern/device.c (grub_device_open): Improve error message.
* disk/lvm.c (grub_lvm_open): Likewise.
* disk/raid.c (grub_raid_open): Likewise.
* partmap/pc.c (pc_partition_map_iterate): Abort parent iteration
when hook requests it, independently of grub_errno.
(pc_partition_map_probe): Do not fail when find_func() caused
early abortion of pc_partition_map_iterate().
* partmap/gpt.c (gpt_partition_map_iterate): Abort parent iteration
when hook requests it, independently of grub_errno.
(gpt_partition_map_probe): Do not fail when find_func() caused
early abortion of gpt_partition_map_iterate().
* kern/partition.c (grub_partition_iterate): Abort parent iteration
when hook requests it, independently of grub_errno. Do not fail when
part_map_iterate_hook() caused early abortion of p->iterate().
* util/biosdisk.c (grub_util_biosdisk_get_grub_dev): Do not fail
when grub_partition_iterate() returned with non-zero.
* include/grub/ieee1275.h (grub_ieee1275_flag): New constant
GRUB_IEEE1275_FLAG_CANNOT_INTERPRET, GRUB_IEEE1275_FLAG_FORCE_CLAIM
and GRUB_IEEE1275_FLAG_NO_ANSI.
* kern/ieee1275/cmain.c (grub_ieee1275_find_options): Set flag
GRUB_IEEE1275_FLAG_CANNOT_INTERPRET, GRUB_IEEE1275_FLAG_FORCE_CLAIM
and GRUB_IEEE1275_FLAG_NO_ANSI for Open Hackware.
* kern/ieee1275/ieee1275.c (grub_ieee1275_interpret): Return
immediately if GRUB_IEEE1275_FLAG_CANNOT_INTERPRET is set.
* kern/ieee1275/init.c (grub_claim_heap): Claim memory directly if
GRUB_IEEE1275_FLAG_FORCE_CLAIM is set.
* term/ieee1275/ofconsole.c (grub_ofconsole_writeesc): Don't output
esc sequence on non ANSI terminal.
(grub_ofconsole_gotoxy): Emulate backspace key on non ANSI terminal.
* util/elf/grub-mkimage.c (add_segments): Move ELF header to the
beginning of file.
* util/i386/pc/grub-setup.c (setup): Write install_dos_part and
install_bsd_part immediately before core.img is embedded or
modified on disk. This fixes core.img verification if core.img
cannot be embedded.
* util/update-grub_lib.in (font_path): Search for fonts in
/boot/grub first, which is more likely to be readable (we aren't
deciding where fonts live, just looking for them).
* util/grub.d/10_linux.in: Avoid passing UUIDs to Linux when either
"/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" does not exist, or when a
Linux image includes no initrd.
* util/grub.d/00_header.in: Move last prepare_grub_to_access_device()
call from here ...
* util/grub.d/10_hurd.in: ... to here ...
* util/grub.d/10_linux.in: ... and here.
* util/update-grub_lib.in (prepare_grub_to_access_device): Remove
check for partition that provides /boot/grub. Its logic is flawed,
as it prevents prepare_grub_to_access_device() from being called
multiple times.
* util/update-grub_lib.in (prepare_grub_to_access_device): Issue
"insmod" command directly when abstraction modules are needed,
instead of reliing on GRUB_PRELOAD_MODULES (which had no effect
since it had already been processed).
* util/i386/pc/grub-install.in: If the drive is LVM or RAID, prepend
it in prefix.
* util/i386/pc/grub-setup.c (main): Don't handle prefix at all. Set
`must_embed' to 1 when root_dev is a RAID device. When dest_dev is
a RAID device, run setup() for all members independently on whether
LVM abstraction is being used.
(setup): Don't handle prefix at all; let grub-mkimage take care of it.
If grub-mkimage has set `*install_dos_part == -2', don't override this
value.
Perform *install_dos_part adjustments independently on whether
we're embedding or not.
Clarify error message when image is too big for embedding.
Remove duplicate *install_dos_part stanza.
* util/update-grub_lib.in (prepare_grub_to_access_device): Use
/boot/grub for the check in last commit, not /boot (they could be
different partitions).
* util/update-grub_lib.in (prepare_grub_to_access_device): If we were
asked to setup access for the same partition that provides /boot,
don't bother using UUIDs since our root already has the value we
want.
* util/i386/pc/grub-mkimage.c (generate_image): If we included a drive
in our prefix, set install_{dos,bsd}_part = -2 to indicate this can be
skipped later.
(main): If a memdisk was requested, add "(memdisk)" drive explicitly to
the beginning of the prefix.
* kern/i386/pc/init.c (make_install_device): Remove memdisk check.
It is assumed that if we have a memdisk, grub-mkimage has set
grub_prefix to include the "(memdisk)" drive in it.
