The verifiers framework changed the API of grub_file_open(), but did not
fix up all users. Add the file type GRUB_FILE_TYPE_DEVICE_TREE_IMAGE
to the "devicetree" command handler call.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On a UEFI system, were no boot entry *grub* is present, currently,
`grub-install` fails with an error.
$ efibootmgr
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0001,0006,0003,0004,0005
Boot0001 Diskette Drive
Boot0003* USB Storage Device
Boot0004* CD/DVD/CD-RW Drive
Boot0005 Onboard NIC
Boot0006* WDC WD2500AAKX-75U6AA0
$ sudo grub-install /dev/sda
Installing for x86_64-efi platform.
grub-install: error: efibootmgr failed to register the boot entry: Unknown error 22020.
The error code is always different, and the error message (incorrectly)
points to efibootmgr.
But, the error is in GRUB’s function
`grub_install_remove_efi_entries_by_distributor()`, where the variable
`rc` for the return value, is uninitialized and never set, when no boot
entry for the distributor is found.
The content of that uninitialized variable is then returned as the error
code of efibootmgr.
Set the variable to 0, so that success is returned, when no entry needs
to be deleted.
Tested on Dell OptiPlex 7010 with firmware A28.
$ sudo ./grub-install /dev/sda
Installing for x86_64-efi platform.
Installation finished. No error reported.
[1]: https://github.com/rhboot/efibootmgr/issues/100
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This module provides shim lock verification for various kernels
if UEFI secure boot is enabled on a machine.
It is recommended to put this module into GRUB2 standalone image
(avoid putting iorw and memrw modules into it; they are disallowed
if UEFI secure boot is enabled). However, it is also possible to use
it as a normal module. Though such configurations are more fragile
and less secure due to various limitations.
If the module is loaded and UEFI secure boot is enabled then:
- module itself cannot be unloaded (persistent module),
- the iorw and memrw modules cannot be loaded,
- if the iorw and memrw modules are loaded then
machine boot is disabled,
- GRUB2 defers modules and ACPI tables verification to
other verifiers.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
This type of modules cannot be unloaded. This is useful if a given
functionality, e.g. UEFI secure boot shim signature verification, should
not be disabled if it was enabled at some point in time. Somebody may
say that we can use standalone GRUB2 here. That is true. However, the
code is not so big nor complicated hence it make sense to support
modularized configs too.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
This way if a verifier requires verification of a given file it can defer task
to another verifier (another authority) if it is not able to do it itself. E.g.
shim_lock verifier, posted as a subsequent patch, is able to verify only PE
files. This means that it is not able to verify any of GRUB2 modules which have
to be trusted on UEFI systems with secure boot enabled. So, it can defer
verification to other verifier, e.g. PGP one.
I silently assume that other verifiers are trusted and will do good job for us.
Or at least they will not do any harm.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Verifiers framework provides core file verification functionality which
can be used by various security mechanisms, e.g., UEFI secure boot, TPM,
PGP signature verification, etc.
The patch contains PGP code changes and probably they should be extracted
to separate patch for the sake of clarity.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Let's provide file type info to the I/O layer. This way verifiers
framework and its users will be able to differentiate files and verify
only required ones.
This is preparatory patch.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Add the RAID 6 recovery, in order to use a RAID 6 filesystem even if some
disks (up to two) are missing. This code use the md RAID 6 code already
present in grub.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The original code which handles the recovery of a RAID 6 disks array
assumes that all reads are multiple of 1 << GRUB_DISK_SECTOR_BITS and it
assumes that all the I/O is done via the struct grub_diskfilter_segment.
This is not true for the btrfs code. In order to reuse the native
grub_raid6_recover() code, it is modified to not call
grub_diskfilter_read_node() directly, but to call an handler passed
as an argument.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add support for recovery for a RAID 5 btrfs profile. In addition
it is added some code as preparatory work for RAID 6 recovery code.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Move the code in charge to read the data from disk into a separate
function. This helps to separate the error handling logic (which
depends on the different raid profiles) from the read from disk
logic. Refactoring this code increases the general readability too.
This is a preparatory patch, to help the adding of the RAID 5/6 recovery code.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A portion of the logging code is moved outside of internal for(;;). The part
that is left inside is the one which depends on the internal for(;;) index.
This is a preparatory patch. The next one will refactor the code inside
the for(;;) into an another function.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently read from missing device triggers rescan. However, it is never
recorded that the device is missing. So, each read of a missing device
triggers rescan again and again. This behavior causes a lot of unneeded
rescans leading to huge slowdowns.
This patch fixes above mentioned issue. Information about missing devices
is stored in the data->devices_attached[] array as NULL value in dev
member. Rescan is triggered only if no information is found for a given
device. This means that only first time read triggers rescan.
The patch drops premature return. This way data->devices_attached[] is
filled even when a given device is missing.
Signed-off-by: Goffredo Baroncelli <kreikack@inwind.it>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The caller knows better if this error is fatal or not, i.e. another disk is
available or not.
This is a preparatory patch.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This helper is used in a few places to help the debugging. As
conservative approach the error is only logged.
This does not impact the error handling.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When booting from NVME SSD with 4k sector size, it fails with the message.
error: attempt to read or write outside of partition.
This patch fixes the problem by fixing overflow in converting partition start
and length into 512B blocks.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When reading data off a disk, sector values are based on the disk sector
length.
Within grub_util_fd_open_device(), the start of the partition was taken
directly from grub's partition information structure, which uses the
internal sector length (currently 512b), but never transformed to the
disk's sector length.
Subsequent calculations were all wrong for devices that have a diverging
sector length and the functions eventually skipped to the wrong stream
location, reading invalid data.
Signed-off-by: Mihai Moldovan <ionic@ionic.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Code later on checks if variables inside the struct are
0 to see if they have been set, like if there were addresses
in the bootpath.
The variables were not initialized however, so the check
might succeed with uninitialized data, and a new interface
with random addresses and the same name is added. This causes
$net_default_mac to point to the random one, so, for example,
using that variable to load per-mac config files fails.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1785859
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is a cryptographically signed message in MIME format.
Date: Thu, 9 Aug 2018 07:27:35 +0200
Currently, the GRUB payload for coreboot does not detect the Western
Digital hard disk WDC WD20EARS-60M AB51 connected to the ASRock E350M1,
as that takes over ten seconds to spin up.
```
disk/ahci.c:533: port 0, err: 0
disk/ahci.c:539: port 0, err: 0
disk/ahci.c:543: port 0, err: 0
disk/ahci.c:549: port 0, offset: 120, tfd:80, CMD: 6016
disk/ahci.c:552: port 0, err: 0
disk/ahci.c:563: port 0, offset: 120, tfd:80, CMD: 6016
disk/ahci.c:566: port: 0, err: 0
disk/ahci.c:593: port 0 is busy
disk/ahci.c:621: cleaning up failed devs
```
GRUB detects the drive, when either unloading the module *ahci*, and
then loading it again, or when doing a warm reset.
As the ten second time-out is too short, increase it to 32 seconds,
used by SeaBIOS. which detects the drive successfully.
The AHCI driver in libpayload uses 30 seconds, and that time-out was
added in commit 354066e1 (libpayload: ahci: Increase timeout for
signature reading) with the description below.
> We can't read the drives signature before it's ready, i.e. spun up.
> So set the timeout to the standard 30s. Also put a notice on the
> console, so the user knows why the signature reading failed.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
1. move relocator related code more close to each other
2. use variable "len" since it has correct assignment, and keep coding
style with upper code
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Delete local copy of function to determine required buffer size for the
UEFI memory map, use helper in kern/efi/mm.c.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Delete local copy of function to determine required buffer size for the
UEFI memory map, use helper in kern/efi/mm.c.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Delete local copy of function to determine required buffer size for the
UEFI memory map, use helper in kern/efi/mm.c.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Commit 0ba90a7f01 ("efi: Move grub_reboot() into kernel") broke
the build on i386-efi - genmoddep.awk bails out with message
grub_reboot in reboot is duplicated in kernel
This is because both lib/i386/reset.c and kern/efi/efi.c now provide
this function.
Rather than explicitly list each i386 platform variant in
Makefile.core.def, include the contents of lib/i386/reset.c only when
GRUB_MACHINE_EFI is not set.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The 32-bit arm Linux kernel is built as a zImage, which self-decompresses
down to near start of RAM. In order for an initrd/initramfs to be
accessible, it needs to be placed within the first ~768MB of RAM.
The initrd loader built into the kernel EFI stub restricts this down to
512MB for simplicity - so enable the same restriction in grub.
For arm64, the requirement is within a 1GB aligned 32GB window also
covering the (runtime) kernel image. Since the EFI stub loader itself
will attempt to relocate to near start of RAM, force initrd to be loaded
completely within the first 32GB of RAM.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The 32-bit arm efi port now shares the 64-bit linux loader, so delete
the now unused bits from the 32-bit linux loader.
This in turn leaves the grub-core/kern/arm/efi/misc.c unused, so
delete that too.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The arm64 and arm linux kernel EFI-stub support presents pretty much
identical interfaces, so the same linux loader source can be used for
both architectures.
Switch 32-bit ARM UEFI platforms over to the existing EFI-stub aware
loader initially developed for arm64.
This *WILL* stop non-efistub Linux kernels from booting on arm-efi.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In preparation for using the linux loader for 32-bit and 64-bit platforms,
rename grub_arm64*/GRUB_ARM64* to grub_armxx*/GRUB_ARMXX*.
Move prototypes for now-common functions to efi/efi.h.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Since ARM platforms do not have a common memory map, add a helper
function that finds the lowest address region with the EFI_MEMORY_WB
attribute set in the UEFI memory map.
Required for the arm64 efi linux loader to restrict the initrd
location to where it will be accessible by the kernel at runtime.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are several implementations of this function in the tree.
Add a central version in grub-core/efi/mm.c.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EFI Graphics Output Protocol can return a 64-bit
linear frame buffer address in some firmware/BIOS
implementations. We currently only store the lower
32-bits in the lfb_base. This will eventually be
passed to Linux kernel and the efifb driver will
incorrectly interpret the framebuffer address as
32-bit address.
The Linux kernel has already added support to handle
64-bit linear framebuffer address in the efifb driver
since quite some time now.
This patch adds the support for 64-bit linear frame
buffer address in GRUB to address the above mentioned
scenario.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Clean up code for matching IS_ARM64 slightly by making use of struct
linux_arm64_kernel_header and GRUB_LINUX_ARM64_MAGIC_SIGNATURE.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Clean up code for matching IS_ARM slightly by making use of struct
linux_arm_kernel_header and GRUB_LINUX_ARM_MAGIC_SIGNATURE.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Most 8" or 7" x86 Windows 10 tablets come with volume up/down buttons and
a power-button. In their UEFI these are almost always mapped to arrow
up/down and enter.
Pressing the volume buttons (sometimes by accident) will stop the
menu countdown, but the power-button / "enter" key was not being recognized
as enter, so the user would be stuck at the grub menu.
The problem is that these tablets send scan_code 13 or 0x0d for the
power-button, which officialy maps to the F3 key. They also set
unicode_char to 0x0d.
This commit recognizes the special case of both scan_code and unicode_char
being set to 0x0d and treats this as an enter key press.
This fixes things getting stuck at the grub-menu and allows the user
to choice a grub-menu entry using the buttons on the tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Without that fix we have:
In file included from ../../include/grub/command.h:25:0,
from ../../grub-core/loader/multiboot.c:30:
../../grub-core/loader/multiboot_elfxx.c: In function 'grub_multiboot_load_elf64':
../../grub-core/loader/multiboot_elfxx.c:130:28: error: 'relocatable' undeclared (first use in this function)
"load_base_addr=0x%x\n", relocatable,
This happens due to mistake in the commit 14ec665
(mbi: Use per segment a separate relocator chunk).
So, let's fix it.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
When booting an arm* system on UEFI with an empty device tree (currently
only when hardware description comes from ACPI), we don't currently set
default to 1 cell (32 bits).
Set both of these properties, to 2 cells (64 bits), to resolve issues
with kexec on some platforms.
This change corresponds with linux kernel commit ae8a442dfdc4
("efi/libstub/arm*: Set default address and size cells values for an empty dtb")
and ensures booting through grub does not behave differently from booting
the stub loader directly.
See also https://patchwork.kernel.org/patch/9561201/
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
To be able to resuse the prop_entry_size macro, move it to
<grub/fdt.h> and rename it grub_fdt_prop_entry_size.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Instead of setting up a all comprising relocator chunk for all segments,
use per segment a separate relocator chunk.
Currently, if the ELF is non-relocatable, a single relocator chunk will
comprise memory (between the segments) which gets overridden by the relst()
invocation of the movers code in grub_relocator16/32/64_boot().
The overridden memory may contain reserved ranges like VGA memory or ACPI
tables, which may lead to crashes or at least to strange boot behaviour.
Signed-off-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The sparse inode metadata format became a mkfs.xfs default in
xfsprogs-4.16.0, and such filesystems are now rejected by grub as
containing an incompatible feature.
In essence, this feature allows xfs to allocate inodes into fragmented
freespace. (Without this feature, if xfs could not allocate contiguous
space for 64 new inodes, inode creation would fail.)
In practice, the disk format change is restricted to the inode btree,
which as far as I can tell is not used by grub. If all you're doing
today is parsing a directory, reading an inode number, and converting
that inode number to a disk location, then ignoring this feature
should be fine, so I've added it to XFS_SB_FEAT_INCOMPAT_SUPPORTED
I did some brief testing of this patch by hacking up the regression
tests to completely fragment freespace on the test xfs filesystem, and
then write a large-ish number of inodes to consume any existing
contiguous 64-inode chunk. This way any files the grub tests add and
traverse would be in such a fragmented inode allocation. Tests passed,
but I'm not sure how to cleanly integrate that into the test harness.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Chris Murphy <lists@colorremedies.com>
This patch ensures that grub-probe will find the root device placed in
/dev/mapper/dm-[0-9]+-.* e.g. device named /dev/mapper/dm-0-luks will be
found and grub.cfg will be updated properly, enabling the system to boot.
Signed-off-by: Oleg Solovyov <mcpain@altlinux.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Rounding up the bufio->block_size to meet power of 2 to facilitate next_buf
calculation in grub_bufio_read().
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Rename grub_gpt_part_type to grub_gpt_part_guid and update grub_gpt_partentry
to use this type for both the partition type GUID string and the partition GUID
string entries. This change ensures that the two GUID fields are handled more
consistently and helps to simplify the changes needed to add Linux partition
GUID support.
Signed-off-by: Nicholas Vinson <nvinson234@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
diskboot.img now is loaded at 0x8000 and is jumped to with 0:0x8000.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
"F2FS (Flash-Friendly File System) is flash-friendly file system which was merged
into Linux kernel v3.8 in 2013.
The motive for F2FS was to build a file system that from the start, takes into
account the characteristics of NAND flash memory-based storage devices (such as
solid-state disks, eMMC, and SD cards).
F2FS was designed on a basis of a log-structured file system approach, which
remedies some known issues of the older log structured file systems, such as
the snowball effect of wandering trees and high cleaning overhead. In addition,
since a NAND-based storage device shows different characteristics according to
its internal geometry or flash memory management scheme (such as the Flash
Translation Layer or FTL), it supports various parameters not only for
configuring on-disk layout, but also for selecting allocation and cleaning
algorithm.", quote by https://en.wikipedia.org/wiki/F2FS.
The source codes for F2FS are available from:
http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs.githttp://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs-tools.git
This patch has been integrated in OpenMandriva Lx 3.
https://www.openmandriva.org/
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Pete Batard <pete@akeo.ie>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A GPU inserted into a PCIe I/O slot disappears during system startup.
The problem centers around GRUB and a specific VGA init function in
efi_uga.c. This causes an LER (Link Error Recorvery) because the MMIO
memory has not been enabled before attempting access.
The fix is to add the same coding used in other VGA drivers, specifically
to add a check to insure that it is indeed a VGA controller. And then
enable the MMIO address space with the specific bits.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
