The Micron PCIe SSDs Linux driver (mtip32xx) exposes block devices
as /dev/rssd[a-z]+[0-9]*. Add support for these rssd device names.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently the string functions grub_strtol(), grub_strtoul(), and
grub_strtoull() don't declare the "end" pointer in such a way as to
require the pointer itself or the character array to be immutable to the
implementation, nor does the C standard do so in its similar functions,
though it does require us not to change any of it.
The typical declarations of these functions follow this pattern:
long
strtol(const char * restrict nptr, char ** restrict endptr, int base);
Much of the reason for this is historic, and a discussion of that
follows below, after the explanation of this change. (GRUB currently
does not include the "restrict" qualifiers, and we name the arguments a
bit differently.)
The implementation is semantically required to treat the character array
as immutable, but such accidental modifications aren't stopped by the
compiler, and the semantics for both the callers and the implementation
of these functions are sometimes also helped by adding that requirement.
This patch changes these declarations to follow this pattern instead:
long
strtol(const char * restrict nptr,
const char ** const restrict endptr,
int base);
This means that if any modification to these functions accidentally
introduces either an errant modification to the underlying character
array, or an accidental assignment to endptr rather than *endptr, the
compiler should generate an error. (The two uses of "restrict" in this
case basically mean strtol() isn't allowed to modify the character array
by going through *endptr, and endptr isn't allowed to point inside the
array.)
It also means the typical use case changes to:
char *s = ...;
const char *end;
long l;
l = strtol(s, &end, 10);
Or even:
const char *p = str;
while (p && *p) {
long l = strtol(p, &p, 10);
...
}
This fixes 26 places where we discard our attempts at treating the data
safely by doing:
const char *p = str;
long l;
l = strtol(p, (char **)&ptr, 10);
It also adds 5 places where we do:
char *p = str;
while (p && *p) {
long l = strtol(p, (const char ** const)&p, 10);
...
/* more calls that need p not to be pointer-to-const */
}
While moderately distasteful, this is a better problem to have.
With one minor exception, I have tested that all of this compiles
without relevant warnings or errors, and that /much/ of it behaves
correctly, with gcc 9 using 'gcc -W -Wall -Wextra'. The one exception
is the changes in grub-core/osdep/aros/hostdisk.c , which I have no idea
how to build.
Because the C standard defined type-qualifiers in a way that can be
confusing, in the past there's been a slow but fairly regular stream of
churn within our patches, which add and remove the const qualifier in many
of the users of these functions. This change should help avoid that in
the future, and in order to help ensure this, I've added an explanation
in misc.h so that when someone does get a compiler warning about a type
error, they have the fix at hand.
The reason we don't have "const" in these calls in the standard is
purely anachronistic: C78 (de facto) did not have type qualifiers in the
syntax, and the "const" type qualifier was added for C89 (I think; it
may have been later). strtol() appears to date from 4.3BSD in 1986,
which means it could not be added to those functions in the standard
without breaking compatibility, which is usually avoided.
The syntax chosen for type qualifiers is what has led to the churn
regarding usage of const, and is especially confusing on string
functions due to the lack of a string type. Quoting from C99, the
syntax is:
declarator:
pointer[opt] direct-declarator
direct-declarator:
identifier
( declarator )
direct-declarator [ type-qualifier-list[opt] assignment-expression[opt] ]
...
direct-declarator [ type-qualifier-list[opt] * ]
...
pointer:
* type-qualifier-list[opt]
* type-qualifier-list[opt] pointer
type-qualifier-list:
type-qualifier
type-qualifier-list type-qualifier
...
type-qualifier:
const
restrict
volatile
So the examples go like:
const char foo; // immutable object
const char *foo; // mutable pointer to object
char * const foo; // immutable pointer to mutable object
const char * const foo; // immutable pointer to immutable object
const char const * const foo; // XXX extra const keyword in the middle
const char * const * const foo; // immutable pointer to immutable
// pointer to immutable object
const char ** const foo; // immutable pointer to mutable pointer
// to immutable object
Making const left-associative for * and right-associative for everything
else may not have been the best choice ever, but here we are, and the
inevitable result is people using trying to use const (as they should!),
putting it at the wrong place, fighting with the compiler for a bit, and
then either removing it or typecasting something in a bad way. I won't
go into describing restrict, but its syntax has exactly the same issue
as with const.
Anyway, the last example above actually represents the *behavior* that's
required of strtol()-like functions, so that's our choice for the "end"
pointer.
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We are often bothered by this sort of lvm warning while running grub-install
every now and then:
File descriptor 4 (/dev/vda1) leaked on vgs invocation. Parent PID 1991: /usr/sbin/grub2-install
The requirement related to the warning is dictated in the lvm man page:
"On invocation, lvm requires that only the standard file descriptors stdin,
stdout and stderr are available. If others are found, they get closed and
messages are issued warning about the leak. This warning can be suppressed by
setting the environment variable LVM_SUPPRESS_FD_WARNINGS."
While it could be disabled through settings, most Linux distributions seem to
enable it by default and the justification provided by the developer looks to
be valid to me: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=466138#15
Rather than trying to close and reopen the file descriptor to the same file
multiple times, which is rather cumbersome, for the sake of no vgs invocation
could happen in between. This patch enables the close-on-exec flag (O_CLOEXEC)
for new file descriptor returned by the open() system call, making it closed
thus not inherited by the child process forked and executed by the exec()
family of functions.
Fixes Debian bug #466138.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Blocklist fallout cleanup after commit 5c6f9bc15 (generic/blocklist: Fix
implicit declaration of function grub_file_filter_disable_compression()).
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Various GRUB utilities fail if the current directory doesn't exist,
because grub_find_device() chdirs to a different directory and then
fails when trying to chdir back. Gnulib's save-cwd module uses fchdir()
instead when it can, avoiding this category of problem.
Fixes Debian bug #918700.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Many of GRUB's utilities don't check anywhere near all the possible
write errors. For example, if grub-install runs out of space when
copying a file, it won't notice. There were missing checks for the
return values of write, fflush, fsync, and close (or the equivalents on
other OSes), all of which must be checked.
I tried to be consistent with the existing logging practices of the
various hostdisk implementations, but they weren't entirely consistent
to start with so I used my judgement. The result at least looks
reasonable on GNU/Linux when I provoke a write error:
Installing for x86_64-efi platform.
grub-install: error: cannot copy `/usr/lib/grub/x86_64-efi-signed/grubx64.efi.signed' to `/boot/efi/EFI/debian/grubx64.efi': No space left on device.
There are more missing checks in other utilities, but this should fix
the most critical ones.
Fixes Debian bug #922741.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
For EBR partitions, "start" is the relative starting sector of the EBR
header itself, whereas "offset" is the relative starting byte of the
partition's contents, excluding the EBR header and any padding. Thus we
must use "offset", and divide by the sector size to convert to sectors.
Fixes Debian bug #923253.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Reviewed-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top of EFI
firmware. If so, return "arm-efi". If not, fall back to "arm-uboot" as
previously.
Split out the code to (maybe) load the efivar module and check for
/sys/firmware/efi into a common helper routine is_efi_system().
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This reverts commit 082fd84d52.
Incorrect version of the patch was pushed into the git repo.
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top
of EFI firmware. If so, return "arm-efi". If not, fall back to
"arm-uboot" as previously.
Heavily inspired by the existing code for x86.
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
grub_file_filter_disable_compression() no longer exists.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On a UEFI system, were no boot entry *grub* is present, currently,
`grub-install` fails with an error.
$ efibootmgr
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0001,0006,0003,0004,0005
Boot0001 Diskette Drive
Boot0003* USB Storage Device
Boot0004* CD/DVD/CD-RW Drive
Boot0005 Onboard NIC
Boot0006* WDC WD2500AAKX-75U6AA0
$ sudo grub-install /dev/sda
Installing for x86_64-efi platform.
grub-install: error: efibootmgr failed to register the boot entry: Unknown error 22020.
The error code is always different, and the error message (incorrectly)
points to efibootmgr.
But, the error is in GRUB’s function
`grub_install_remove_efi_entries_by_distributor()`, where the variable
`rc` for the return value, is uninitialized and never set, when no boot
entry for the distributor is found.
The content of that uninitialized variable is then returned as the error
code of efibootmgr.
Set the variable to 0, so that success is returned, when no entry needs
to be deleted.
Tested on Dell OptiPlex 7010 with firmware A28.
$ sudo ./grub-install /dev/sda
Installing for x86_64-efi platform.
Installation finished. No error reported.
[1]: https://github.com/rhboot/efibootmgr/issues/100
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When reading data off a disk, sector values are based on the disk sector
length.
Within grub_util_fd_open_device(), the start of the partition was taken
directly from grub's partition information structure, which uses the
internal sector length (currently 512b), but never transformed to the
disk's sector length.
Subsequent calculations were all wrong for devices that have a diverging
sector length and the functions eventually skipped to the wrong stream
location, reading invalid data.
Signed-off-by: Mihai Moldovan <ionic@ionic.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch ensures that grub-probe will find the root device placed in
/dev/mapper/dm-[0-9]+-.* e.g. device named /dev/mapper/dm-0-luks will be
found and grub.cfg will be updated properly, enabling the system to boot.
Signed-off-by: Oleg Solovyov <mcpain@altlinux.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Limit NVMe of_path_of_nvme to just SPARC hardware for now. It has been
found that non-Open Firmware hardware platforms can some how access
this function.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The of_path_of_nvme function (commit 2391d57, ieee1275: add nvme
support within ofpath) introduced a functional regression:
On systems which are not based on Open Firmware but have at
least one NVME device, find_obppath will return NULL and thus
trying to append the disk name to of_path will result in a
crash.
The proper behavior of of_path_of_nvme is, however, to just
return NULL in such cases, like other users of find_obppath,
such as of_path_of_scsi.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The of_path_of_nvme function (commit 2391d57, ieee1275: add nvme
support within ofpath) introduced a build regression:
grub-core/osdep/linux/ofpath.c:365:21: error: comparison between pointer
and zero character constant [-Werror=pointer-compare]
if ((digit_string != '\0') && (*part_end == 'p'))
Update digit_string to compare against the char instead of the pointer.
Signed-off-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add NVMe support within ofpath.
The Open Firmware text representation for a NVMe device contains the
Namespace ID. An invalid namespace ID is one whose value is zero or whose
value is greater than the value reported by the Number of Namespaces (NN)
field in the Identify Controller data structure. At the moment only a
single Namespace is supported, therefore the value is currently hard coded
to one.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Code is currently ignoring errors from efibootmgr, giving users
clearly bogus output like:
Setting up grub-efi-amd64 (2.02~beta3-4) ...
Installing for x86_64-efi platform.
Could not delete variable: No space left on device
Could not prepare Boot variable: No space left on device
Installation finished. No error reported.
and then potentially unbootable systems. If efibootmgr fails, grub-install
should know that and report it!
We've been using similar patch in Debian now for some time, with no ill effects.
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Fix the Open Firmware (OF) path property for sun4v SPARC systems.
These platforms do not have a /sas/ within their path. Over time
different OF addressing schemes have been supported. There
is no generic addressing scheme that works across every HBA.
It looks that this functionality will not work if you try to cross-install
SPARC GRUB2 binary using e.g. x86 grub-install. By default it should work.
However, we will also have other issues here, like lack of access to OF
firmware/paths, which make such configs unusable anyway. So, let's leave
this patch as is for time being. If somebody cares then he/she should fix
the issue(s) at some point.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The `grub_util_exec_redirect_all` helper function can be used to
spawn an executable and redirect its output to some files. After calling
`fork()`, the parent will wait for the child to terminate with
`waitpid()` while the child prepares its file descriptors, environment
and finally calls `execvp()`. If something in the children's setup
fails, it will stop by calling `exit(127)`.
Calling `exit()` will cause any function registered via `atexit()` to be
executed, which is usually the wrong thing to do in a child. And
actually, one can easily observe faulty behaviour on musl-based systems
without modprobe(8) installed: executing `grub-install --help` will call
`grub_util_exec_redirect_all` with "modprobe", which obviously fails if
modprobe(8) is not installed. Due to the child now exiting and invoking
the `atexit()` handlers, it will clean up some data structures of the
parent and cause it to be deadlocked in the `waitpid()` syscall.
The issue can easily be fixed by calling `_exit(127)` instead, which is
especially designed to be called when the atexit-handlers should not be
executed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Don't use devspec to determine the OBP path on SPARC hardware. Within all
versions of Linux on SPARC, the devspec returns one of three values:
"none", "vnet-port", or "vdisk". Unlike on PPC, none of these values
are useful in determining the OBP path.
Before this patch grub-ofpathname always returned the wrong value
for a virtual disk. For example:
% grub-ofpathname /dev/vdiskc2
vdisk/disk@2:b
After this patch it now returns the correct value:
% grub-ofpathname /dev/vdiskc2
/virtual-devices@100/channel-devices@200/disk@2:b
Orabug: 24459765
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
These entries have placeholder for device name and so are useless for our
purpose. grub failed with something like
grub-install: error: failed to get canonical path of `systemd-1'.
When we see autofs entry, record it (to keep parent-child relationship) but
continue to look for real mount. If it is found, we process it as usual. If
only autofs entry exists, attempt to trigger mount by opening mount point
and retry. Mount point itself is then kept open to avoid timeout.
Recent systemd is by default using automount for /boot/efi so this should
become more popular problem on EFI systems.
Closes: 49942
grub_util_get_dm_abstraction() does a string comparison of insufficient
length. When using a UUID such as "CRYPT-PLAIN-sda6_crypt", the function
returns GRUB_DEV_ABSTRACTION_LUKS.
This results in the error:
./grub-probe: error: disk `cryptouuid/sda6_crypt' not found.
This appears to be a copy/paste error introduced in:
a10e7a5a89
The bug was (apparently) latent until revealed by:
3bca85b418
Signed-off-by: Corey Hickey <bugfood-c@fatooh.org>
Depending on the OS/libc, device macros are defined in different
headers. This change ensures we include the right one.
sys/types.h - BSD
sys/mkdev.h - Sun
sys/sysmacros.h - glibc (Linux)
glibc currently pulls sys/sysmacros.h into sys/types.h, but this may
change in a future release.
https://sourceware.org/ml/libc-alpha/2015-11/msg00253.html
This was lost when code was refactored. Patch restores previous behavior.
It is still not clear whether this is the right one. Due to the way we
detect DM abstraction, partitions on DM are skipped, we fall through to
generic detection which ends up in assuming parent device is BIOS disk.
It is useful to install GRUB on VM disk from the host. But it also means
that GRUB will mistakenly allow install on real system as well.
For now let's fix regression; future behavior needs to be discussed.
Closes: 45163
GRUB keeps partition offset and size in units of 512B sectors. Media paths
are defined in terms of LBA which are presumed to match HDD sector size.
This is probably cosmetic (EFI requires that partition is searched by GUID)
and still incorrect if GPT was created using different logical block size.
But current code is obviously wrong and new has better chances to be correct.
This makes it impossible to read from stdin without controlling tty:
10:/mnt # echo -e passwd\\npasswd | setsid ./grub-mkpasswd-pbkdf2
Enter password:
Reenter password: ./grub-mkpasswd-pbkdf2: error: failure to read password.
10:/mnt
Since btrfs on-disk format uses little-endian, the searched item types
(ROOT_REF, INODE_REF) need converting the byte order in order to
function properly on big-endian systems.
Some x86 systems might be capable of running a 64-bit Linux kernel but
only use a 32-bit EFI (e.g. Intel Bay Trail systems). It's useful for
grub-install to be able to recognise such systems, to set the default
x86 platform correctly.
To allow grub-install to know the size of the firmware rather than
just the size of the kernel, there is now an extra EFI sysfs file to
describe the underlying firmware. Read that if possible, otherwise
fall back to the kernel type as before.
Signed-off-by: Steve McIntyre <steve@einval.com>
canonicalize_file_name clashed with gnulib function. Additionally
it was declared in 2 places: emu/misc.h and util/misc.h. Added
grub_ prefix and removed second declaration.
strlcpy is not available on Linux as part of standard libraries.
It probably is not worth extra configure checks espicially as we
need to handle missing function anyway.
