All symbols prefixed with PUPA_ and pupa_ are renamed to GRUB_
and grub_, respectively. Because the conversion is trivial and
mechanical, I omit the details here. Please refer to the CVS
if you need more information.
Add support for the newworld apple macintosh (PPC). This has been
tested on the powerbook 2000 only. It only adds support for
generic ieee1275 functions, console and disk support. This should
be easy to port to other architectures with support for Open
Firmware.
* configure.ac: Accept the powerpc as host_cpu. In the case of
the powerpc cpu set the host_vendor to ieee1275. Make sure the i386
specific tests are only executed while building for the i386.
Inverse test for crosscompile.
* genmk.rb (Utility): Allow assembler files.
* normal/cmdline.c (pupa_tab_complete): Reset pupa_errno.
* conf/powerpc-ieee1275.rmk: New file.
* disk/powerpc/ieee1275/ofdisk.c: Likewise.
* disk/powerpc/ieee1275/partition.c: Likewise.
* include/pupa/powerpc/ieee1275/biosdisk.h: Likewise.
* include/pupa/powerpc/ieee1275/console.h: Likewise.
* include/pupa/powerpc/ieee1275/partition.h: Likewise.
* include/pupa/powerpc/ieee1275/time.h: Likewise.
* include/pupa/powerpc/ieee1275/util/biosdisk.h: Likewise.
* include/pupa/powerpc/ieee1275/multiboot.h: Likewise.
* include/pupa/powerpc/ieee1275/loader.h
* include/pupa/powerpc/setjmp.h: Likewise.
* include/pupa/powerpc/types.h: Likewise.
* kern/powerpc/ieee1275/init.c: Likewise.
* kern/powerpc/ieee1275/openfw.c: Likewise.
* term/powerpc/ieee1275/ofconsole.c: Likewise.
These files were written by Johan Rydberg
(jrydberg@night.trouble.net) and I only modified them slightly.
* boot/powerpc/ieee1275/cmain.c: New file.
* boot/powerpc/ieee1275/crt0.S: Likewise.
* boot/powerpc/ieee1275/ieee1275.c: Likewise.
* include/pupa/powerpc/ieee1275/ieee1275.h: Likewise.
Now this project is GRUB 2 rather than PUPA. The location of
the CVS repository was moved to GRUB's.
* configure.ac: Use bug-grub as the reporting address.
Use GRUB instead of PUPA.
Change the version number to 1.90.
* README: In the pupa-mkimage example use _chain instead of chain
and ext2 instead of fat.
* TODO: Replace ext2fs with jfs as an example. Add an item for
adding journal playback for ext2fs.
* conf/i386-pc.rmk (pupa_setup_SOURCES): Added fs/ext2.c.
(pkgdata_MODULES): Added ext2.mod.
(ext2_mod_SOURCES): New variable.
(ext2_mod_CFLAGS): Likewise.
* include/pupa/err.h (pupa_err_t): Added PUPA_ERR_SYMLINK_LOOP.
* include/pupa/misc.h (pupa_strncpy): New prototype.
(pupa_strcat): Likewise.
(pupa_strncmp): Likewise.
* kern/misc.c (pupa_strcat): Enable function.
(pupa_strncpy): New function.
(pupa_strncmp): Likewise.
* kern/disk.c (pupa_disk_read): Set pupa_errno to PUPA_ERR_NONE
when the read failed before retrying.
* util/i386/pc/biosdisk.c (_LARGEFILE_SOURCE): Removed.
(_FILE_OFFSET_BITS): Likewise.
* configure.ac: Added AC_SYS_LARGEFILE.
* kern/i386/pc/lzo1x.S: New file.
* util/i386/pc/pupa-mkimage.c: Include lzo1x.h.
(compress_kernel): New variable.
(generate_image): Heavily modified to support compressing a
large part of the core image.
* util/misc.c (pupa_util_read_image): Fix a file descriptor
leak.
(pupa_util_load_image): New function.
* kern/i386/pc/startup.S: Include pupa/machine/kernel.h.
(pupa_compressed_size): New variable.
(codestart): Enable Gate A20 here.
Decompress the compressed part of the core image.
Rearrange the code to put functions and variables which are
required for initialization in the non-compressed part.
Include lzo1x.S.
* kern/i386/pc/init.c (pupa_machine_init): Don't enable Gate A20
here.
* include/pupa/util/misc.h (pupa_util_write_image): Declared.
* include/pupa/i386/pc/kernel.h
(PUPA_KERNEL_MACHINE_COMPRESSED_SIZE): New macro.
(PUPA_KERNEL_MACHINE_INSTALL_DOS_PART): Increased by 4.
(PUPA_KERNEL_MACHINE_INSTALL_BSD_PART): Likewise.
(PUPA_KERNEL_MACHINE_PREFIX): Likewise.
(PUPA_KERNEL_MACHINE_RAW_SIZE): New macro.
* conf/i386-pc.rmk (pupa_mkimage_LDFLAGS): New variable.
* genmk.rb (Image#rule): Put LDFLAGS at the end of a line.
(Utility#rule): Likewise.
* configure.ac: Check if LZO is available.
* util/i386/pc/pupa-setup.c: Include pupa/machine/kernel.h.
(setup): Configure the installed partition information and the
dl prefix.
* loader/i386/pc/chainloader.c (my_mod): New variable.
(pupa_chainloader_unload): New function.
(pupa_rescue_cmd_chainloader): Refer itself.
(PUPA_MOD_INIT): Save its own module in MY_MOD.
* kern/i386/pc/startup.S (install_partition): Removed.
(version_string): Likewise.
(config_file): Likewise.
(pupa_install_dos_part): New variable.
(pupa_install_bsd_part): Likewise.
(pupa_prefix): Likewise.
(pupa_chainloader_real_boot): Call pupa_dl_unload_all.
* kern/i386/pc/init.c: Include pupa/machine/kernel.h, pupa/dl.h
and pupa/misc.h.
(make_install_device): New function.
(pupa_machine_init): Set the dl prefix.
* kern/rescue.c: Include pupa/rescue.h and pupa/dl.h.
(buf): Renamed to ...
(linebuf): ... this.
(pupa_rescue_cmd_prefix): New function.
(pupa_rescue_cmd_insmod): Likewise.
(pupa_rescue_cmd_rmmod): Likewise.
(pupa_rescue_cmd_lsmod): Likewise.
(pupa_enter_rescue_mode): Register new commands: prefix, insmod,
rmmod and lsmod.
* kern/mm.c (pupa_memalign): If failed even after invalidating
disk caches, unload unneeded modules and retry.
* kern/misc.c (pupa_memmove): New function.
(pupa_memcpy): Removed.
(pupa_strcpy): New function.
(pupa_itoa): Made static.
* kern/dl.c (pupa_dl_iterate): New function.
(pupa_dl_ref): Likewise.
(pupa_dl_unref): Likewise.
(pupa_dl_unload): Return if succeeded or not.
(pupa_dl_unload_unneeded): New function.
(pupa_dl_unload_all): Likewise.
(pupa_dl_init): Renamed to ...
(pupa_dl_set_prefix): ... this.
(pupa_dl_get_prefix): New function.
* include/pupa/i386/pc/kernel.h: Include pupa/types.h.
(PUPA_KERNEL_MACHINE_INSTALL_DOS_PART): New macro.
(PUPA_KERNEL_MACHINE_INSTALL_BSD_PART): Likewise.
(PUPA_KERNEL_MACHINE_PREFIX): Likewise.
(pupa_install_dos_part): Declared.
(pupa_install_bsd_part): Likewise.
(pupa_prefix): Likewise.
(pupa_boot_drive): Likewise.
* include/pupa/types.h: Fix a typo.
* include/pupa/misc.h (pupa_memcpy): New macro. Just an alias to
pupa_memmove.
(pupa_memmove): Declared.
(pupa_strcpy): Likewise.
* include/pupa/dl.h (PUPA_MOD_INIT): Change the prototype. Now
pupa_mod_init takes one argument, its own module.
(pupa_dl_unload_unneeded): Declared.
(pupa_dl_unload_all): Likewise.
(pupa_dl_ref): Likewise.
(pupa_dl_unref): Likewise.
(pupa_dl_iterate): Likewise.
(pupa_dl_init): Renamed to ...
(pupa_dl_set_prefix): ... this.
(pupa_dl_get_prefix): Declared.
* fs/fat.c [!PUPA_UTIL] (my_mod): New variable.
(pupa_fat_dir) [!PUPA_UTIL]: Prevent the fat module from being
unloaded.
(pupa_fat_open) [!PUPA_UTIL]: Refer itself if succeeded.
(pupa_fat_close) [!PUPA_UTIL]: Unrefer itself.
* configure.ac (tmp_CFLAGS): Added -Wshadow, -Wpointer-arith,
-Wmissing-prototypes, -Wundef and -Wstrict-prototypes.
* configure.ac: Check ld.
Replace CFLAGS and CPPFLAGS with BUILD_CFLAGS and BUILD_CPPFLAGS
respectively, before checking endianness and sizes.
* Makefile.in (LD): New variable.
