Much like on x86, we can work out if the system is running on top of EFI
firmware. If so, return "arm-efi". If not, fall back to "arm-uboot" as
previously.
Split out the code to (maybe) load the efivar module and check for
/sys/firmware/efi into a common helper routine is_efi_system().
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This reverts commit 082fd84d52.
Incorrect version of the patch was pushed into the git repo.
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top
of EFI firmware. If so, return "arm-efi". If not, fall back to
"arm-uboot" as previously.
Heavily inspired by the existing code for x86.
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
grub_efi_get_ram_base() looks for the lowest available RAM address by
traversing the memory map, comparing lowest address found so far.
Due to a brain glitch, that "so far" was initialized to GRUB_UINT_MAX -
completely preventing boot on systems without RAM below 4GB.
Change the initial value to GRUB_EFI_MAX_USABLE_ADDRESS, as originally
intended.
Reported-by: Steve McIntyre <93sam@debian.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Some terminals, like `grub-core/term/at_keyboard.c`, return `-1` in case
they are not ready yet.
if (! KEYBOARD_ISREADY (grub_inb (KEYBOARD_REG_STATUS)))
return -1;
Currently, that is treated as a key press, and the menu time-out is
cancelled/cleared. This is unwanted, as the boot is stopped and the user
manually has to select a menu entry. Therefore, adapt the condition to
require the key value also to be greater than 0.
`GRUB_TERM_NO_KEY` is defined as 0, so the condition could be collapsed
to greater or equal than (≥) 0, but the compiler will probably do that
for us anyway, so keep the cases separate for clarity.
This is tested with coreboot, the GRUB default payload, and the
configuration file `grub.cfg` below.
For GRUB:
$ ./autogen.sh
$ ./configure --with-platform=coreboot
$ make -j`nproc`
$ make default_payload.elf
For coreboot:
$ more grub.cfg
serial --unit 0 --speed 115200
set timeout=5
menuentry 'halt' {
halt
}
$ build/cbfstool build/coreboot.rom add-payload \
-f /dev/shm/grub/default_payload.elf -n fallback/payload -c lzma
$ build/cbfstool build/coreboot.rom add -f grub.cfg -n etc/grub.cfg -t raw
$ qemu-system-x86_64 --version
QEMU emulator version 3.1.0 (Debian 1:3.1+dfsg-2+b1)
Copyright (c) 2003-2018 Fabrice Bellard and the QEMU Project developers
$ qemu-system-x86_64 -M pc -bios build/coreboot.rom -serial stdio -nic none
Currently, the time-out is cancelled/cleared. With the commit, it is not.
With a small GRUB payload, this the problem is also reproducible on the
ASRock E350M1.
Link: http://lists.gnu.org/archive/html/grub-devel/2019-01/msg00037.html
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We now have signature check logic in grub which allows us to treat
files differently depending on their file type.
Treat a loaded device tree like an overlayed ACPI table.
Both describe hardware, so I suppose their threat level is the same.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for RISC-V to the grub build system. With this
patch, I can successfully build grub on RISC-V as a UEFI application.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Gcc may decide it wants to call helper functions to execute clz. Provide
them in our own copy of libgcc.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
To support a new architecture we need to provide a few helper functions
for memory, cache, timer, etc support.
This patch adds the remainders of those. Some bits are still disabled,
as I couldn't guarantee that we're always running on models / in modes
where the respective hardware is available.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds awareness of RISC-V relocations throughout the grub tools
as well as dynamic linkage and elf->PE relocation conversion support.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We currently only support to run grub on RISC-V as UEFI payload. Ideally,
we also only want to support running Linux underneath as UEFI payload.
Prepare that with some Linux boot stub code. Once the arm64 target is
generalized, we can hook into that one and gain boot functionality.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On entry, we need to save the system table pointer as well as our image
handle. Add an early startup file that saves them and then brings us
into our main function.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds a 32/64 capable setjmp implementation for RISC-V.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Some architectures want to boot Linux as plain UEFI binary. Today that
really only encompasses ARM and AArch64, but going forward more
architectures may adopt that model.
So rename our internal API accordingly.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch allows to have bigger kernels. If the kernel grows, then it will
overwrite the initrd when it is extracted.
Signed-off-by: Guillaume GARDET <guillaume.gardet@arm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A certain amount of dynamic space is required for the handover from
GRUB/Linux-EFI-stub. This entails things like initrd addresses,
address-cells entries and associated strings.
But move this into a proper centralised #define rather than live-code
it in the loader.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
uboot_disk_write() is currently lacking the write support
to storage devices because, historically, those devices did not
implement block_write() in U-Boot.
The solution has been tested using a patched U-Boot loading
and booting GRUB in a QEMU vexpress-a9 environment.
The disk write operations were triggered with GRUB's save_env
command.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The value of tpm_handle changes between successive calls to grub_tpm_handle_find(),
as instead of simply copying the stored pointer we end up taking the address of
said pointer when using the cached value of grub_tpm_handle.
This causes grub_efi_open_protocol() to return a nullptr in grub_tpm2_execute()
and grub_tpm2_log_event(). Said nullptr goes unchecked and
efi_call_5(tpm->hash_log_extend_event,...) ends up jumping to 0x0, Qemu crashes
once video ROM is reached at 0xb0000.
This patch seems to do the trick of fixing that bug, but we should also ensure
that all calls to grub_efi_open_protocol() are checked so that we don't start
executing low memory.
Signed-off-by: Max Tottenham <mtottenh@akamai.com>
Reviewed-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Commit b07feb8746 (verifiers: Rename
verify module to pgp module) renamed the "verify" module to "pgp", but
the GRUB_MOD_INIT and GRUB_MOD_FINI macros were left as "verify", which
broke the emu target build; and file_filter_test still referred to the
now non-existent "verify" module. Fix both of these.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We should not try to copy any memory area which is outside of the original
fdt. If this extra memory is controlled by a hypervisor this might end
with a crash.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add support for performing basic TPM measurements. Right now this only
supports extending PCRs statically and only on UEFI. In future we might
want to have some sort of mechanism for choosing which events get logged
to which PCRs, but this seems like a good default policy and we can wait
to see whether anyone has a use case before adding more complexity.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Pass all commands executed by GRUB to the verifiers layer. Most verifiers will
ignore this, but some (such as the TPM verifier) want to be able to measure and
log each command executed in order to ensure that the boot state is as expected.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add the modifications to the build system needed to build a xen_pvh
grub.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Add all usable memory regions to grub memory management and add the
needed mmap iterate code, which will be used by grub core (e.g.
grub-core/lib/relocator.c or grub-core/mmap/mmap.c).
As we are running in 32-bit mode don't add memory above 4GB.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Initialize the needed Xen specific data. This is:
- the Xen start of day page containing the console and Xenstore ring
page PFN and event channel
- the grant table
- the shared info page
Write back the possibly modified memory map to the hypervisor in case
the guest is reading it from there again.
Set the RSDP address for the guest from the start_info page passed
as boot parameter.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Retrieve the memory map from the hypervisor and normalize it to contain
no overlapping entries and to be sorted by address.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Add the needed code to setup the hypercall page for calling into the
Xen hypervisor.
Import the XEN_HVM_DEBUGCONS_IOPORT define from Xen unstable into
include/xen/arch-x86/xen.h
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Add the code for the Xen PVH mode boot entry.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Add the hooks to current code needed for Xen PVH. They will be filled
with code later when the related functionality is being added.
loader/i386/linux.c needs to include machine/kernel.h now as it needs
to get GRUB_KERNEL_USE_RSDP_ADDR from there. This in turn requires to
add an empty kernel.h header for some i386 platforms (efi, coreboot,
ieee1275, xen) and for x86_64 efi.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
grub_xen_ptr2mfn() returns the machine frame number for a given pointer
value. For Xen-PVH guests this is just the PFN. Add the PVH specific
variant.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Rearrange grub-core/kern/xen/init.c to prepare adding PVH mode support
to it. This includes putting some code under #ifdef GRUB_MACHINE_XEN
as it will not be used when running as PVH.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Some common code needs to be special cased for Xen PVH mode. This hits
mostly Xen PV mode specific areas.
Split include/grub/i386/pc/int_types.h off from
include/grub/i386/pc/int.h to support including this file later from
xen_pvh code without the grub_bios_interrupt definition.
Move definition of struct grub_e820_mmap_entry from
grub-core/mmap/i386/pc/mmap.c to include/grub/i386/memory.h in order
to make it usable from xen_pvh code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Initialize the grant tab in a dedicated function. This will enable
using it for PVH guests, too.
Call the new function from grub_machine_init() as this will later
be common between Xen PV and Xen PVH mode.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Xen PVH guests will have the RSDP at an arbitrary address. Support that
by passing the RSDP address via the boot parameters to Linux.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
ARM Xen fallout cleanup after commit ca0a4f689 (verifiers: File type for
fine-grained signature-verification controlling).
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Xen fallout cleanup after commit ca0a4f689 (verifiers: File type for
fine-grained signature-verification controlling).
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
The grub_ieee1275_parse_bootpath() function (commit a661a32, ofnet: Initialize
structs in bootpath parser) introduces a build regression on SPARC:
cc1: warnings being treated as errors
net/drivers/ieee1275/ofnet.c: In function 'grub_ieee1275_parse_bootpath':
net/drivers/ieee1275/ofnet.c:156: error: missing initializer
net/drivers/ieee1275/ofnet.c:156: error: (near initialization for 'client_addr.type')
net/drivers/ieee1275/ofnet.c:156: error: missing initializer
net/drivers/ieee1275/ofnet.c:156: error: (near initialization for 'gateway_addr.type')
net/drivers/ieee1275/ofnet.c:156: error: missing initializer
net/drivers/ieee1275/ofnet.c:156: error: (near initialization for 'subnet_mask.type')
net/drivers/ieee1275/ofnet.c:157: error: missing initializer
net/drivers/ieee1275/ofnet.c:157: error: (near initialization for 'hw_addr.type')
make[3]: *** [net/drivers/ieee1275/ofnet_module-ofnet.o] Error 1
Initialize the entire structure.
More info can be found here:
http://lists.gnu.org/archive/html/grub-devel/2018-03/msg00034.html
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
- Adds zstd support to the btrfs module.
- Adds a test case for btrfs zstd support.
- Changes top_srcdir to srcdir in the btrfs module's lzo include
following comments from Daniel Kiper about the zstd include.
Tested on Ubuntu-18.04 with a btrfs /boot partition with and without zstd
compression. A test case was also added to the test suite that fails before
the patch, and passes after.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
- Import zstd-1.3.6 from upstream
- Add zstd's module.c file
- Add the zstd module to Makefile.core.def
Import zstd-1.3.6 from upstream [1]. Only the files need for decompression
are imported. I used the latest zstd release, which includes patches [2] to
build cleanly in GRUB.
I included the script used to import zstd-1.3.6 below at the bottom of the
commit message.
Upstream zstd commit hash: 4fa456d7f12f8b27bd3b2f5dfd4f46898cb31c24
Upstream zstd commit name: Merge pull request #1354 from facebook/dev
Zstd requires some posix headers, which it gets from posix_wrap.
This can be checked by inspecting the .Po files generated by automake,
which contain the header dependencies. After building run the command
`cat grub-core/lib/zstd/.deps-core/*.Po` to see the dependencies [3].
The only OS dependencies are:
- stddef.h, which is already a dependency in posix_wrap, and used for size_t
by lzo and xz.
- stdarg.h, which comes from the grub/misc.h header, and we don't use in zstd.
All the types like uint64_t are typedefed to grub_uint64_t under the hood.
The only exception is size_t, which comes from stddef.h. This is already the
case for lzo and xz. I don't think there are any cross-compilation concerns,
because cross-compilers provide their own system headers (and it would already
be broken).
[1] https://github.com/facebook/zstd/releases/tag/v1.3.6
[2] https://github.com/facebook/zstd/pull/1344
[3] https://gist.github.com/terrelln/7a16b92f5a1b3aecf980f944b4a966c4
```
curl -L -O https://github.com/facebook/zstd/releases/download/v1.3.6/zstd-1.3.6.tar.gz
curl -L -O https://github.com/facebook/zstd/releases/download/v1.3.6/zstd-1.3.6.tar.gz.sha256
sha256sum --check zstd-1.3.6.tar.gz.sha256
tar xzf zstd-1.3.6.tar.gz
SRC_LIB="zstd-1.3.6/lib"
DST_LIB="grub-core/lib/zstd"
rm -rf $DST_LIB
mkdir -p $DST_LIB
cp $SRC_LIB/zstd.h $DST_LIB/
cp $SRC_LIB/common/*.[hc] $DST_LIB/
cp $SRC_LIB/decompress/*.[hc] $DST_LIB/
rm $DST_LIB/{pool.[hc],threading.[hc]}
rm -rf zstd-1.3.6*
echo SUCCESS!
```
Signed-off-by: Nick Terrell <terrelln@fb.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
An error emerged as when I was testing the verifiers branch, so instead
of putting it in pgp prefix, the verifiers is used to reflect what the
patch is based on.
While running verify_detached, grub aborts with error.
verify_detached /@/.snapshots/1/snapshot/boot/grub/grub.cfg
/@/.snapshots/1/snapshot/boot/grub/grub.cfg.sig
alloc magic is broken at 0x7beea660: 0
Aborted. Press any key to exit.
The error is caused by sig file descriptor been closed twice, first time
in grub_verify_signature() to which it is passed as parameter. Second in
grub_cmd_verify_signature() or in whichever opens the sig file
descriptor. The second close is not consider as bug to me either, as in
common rule of what opens a file has to close it to avoid file
descriptor leakage.
After all the design of grub_verify_signature() makes it difficult to keep
a good trace on opened file descriptor from it's caller. Let's refine
the application interface to accept file path rather than descriptor, in
this way the caller doesn't have to care about closing the descriptor by
delegating it to grub_verify_signature() with full tracing to opened
file descriptor by itself.
Also making it clear that sig descriptor is not referenced in error
returning path of grub_verify_signature_init(), so it can be closed
directly by it's caller. This also makes delegating it to
grub_pubkey_close() infeasible to help in relieving file descriptor
leakage as it has to depend on uncertainty of ctxt fields in error
returning path.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
grub_file_filter_disable_compression() no longer exists.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Without this fix, building xen_boot.c omits:
loader/arm64/xen_boot.c: In function ‘xen_boot_binary_load’:
loader/arm64/xen_boot.c:370:7: error: too few arguments to function ‘grub_create_loader_cmdline’
grub_create_loader_cmdline (argc - 1, argv + 1, binary->cmdline,
^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from loader/arm64/xen_boot.c:36:0:
../include/grub/lib/cmdline.h:29:12: note: declared here
grub_err_t grub_create_loader_cmdline (int argc, char *argv[], char *buf,
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The verifiers framework changed the grub_file_open() interface, breaking all
non-x86 linux loaders. Add file types to the grub_file_open() calls to make
them build again.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The verifiers framework changed the API of grub_file_open(), but did not
fix up all users. Add the file type GRUB_FILE_TYPE_DEVICE_TREE_IMAGE
to the "devicetree" command handler call.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On a UEFI system, were no boot entry *grub* is present, currently,
`grub-install` fails with an error.
$ efibootmgr
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0001,0006,0003,0004,0005
Boot0001 Diskette Drive
Boot0003* USB Storage Device
Boot0004* CD/DVD/CD-RW Drive
Boot0005 Onboard NIC
Boot0006* WDC WD2500AAKX-75U6AA0
$ sudo grub-install /dev/sda
Installing for x86_64-efi platform.
grub-install: error: efibootmgr failed to register the boot entry: Unknown error 22020.
The error code is always different, and the error message (incorrectly)
points to efibootmgr.
But, the error is in GRUB’s function
`grub_install_remove_efi_entries_by_distributor()`, where the variable
`rc` for the return value, is uninitialized and never set, when no boot
entry for the distributor is found.
The content of that uninitialized variable is then returned as the error
code of efibootmgr.
Set the variable to 0, so that success is returned, when no entry needs
to be deleted.
Tested on Dell OptiPlex 7010 with firmware A28.
$ sudo ./grub-install /dev/sda
Installing for x86_64-efi platform.
Installation finished. No error reported.
[1]: https://github.com/rhboot/efibootmgr/issues/100
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This module provides shim lock verification for various kernels
if UEFI secure boot is enabled on a machine.
It is recommended to put this module into GRUB2 standalone image
(avoid putting iorw and memrw modules into it; they are disallowed
if UEFI secure boot is enabled). However, it is also possible to use
it as a normal module. Though such configurations are more fragile
and less secure due to various limitations.
If the module is loaded and UEFI secure boot is enabled then:
- module itself cannot be unloaded (persistent module),
- the iorw and memrw modules cannot be loaded,
- if the iorw and memrw modules are loaded then
machine boot is disabled,
- GRUB2 defers modules and ACPI tables verification to
other verifiers.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
This type of modules cannot be unloaded. This is useful if a given
functionality, e.g. UEFI secure boot shim signature verification, should
not be disabled if it was enabled at some point in time. Somebody may
say that we can use standalone GRUB2 here. That is true. However, the
code is not so big nor complicated hence it make sense to support
modularized configs too.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
This way if a verifier requires verification of a given file it can defer task
to another verifier (another authority) if it is not able to do it itself. E.g.
shim_lock verifier, posted as a subsequent patch, is able to verify only PE
files. This means that it is not able to verify any of GRUB2 modules which have
to be trusted on UEFI systems with secure boot enabled. So, it can defer
verification to other verifier, e.g. PGP one.
I silently assume that other verifiers are trusted and will do good job for us.
Or at least they will not do any harm.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Verifiers framework provides core file verification functionality which
can be used by various security mechanisms, e.g., UEFI secure boot, TPM,
PGP signature verification, etc.
The patch contains PGP code changes and probably they should be extracted
to separate patch for the sake of clarity.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Let's provide file type info to the I/O layer. This way verifiers
framework and its users will be able to differentiate files and verify
only required ones.
This is preparatory patch.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Add the RAID 6 recovery, in order to use a RAID 6 filesystem even if some
disks (up to two) are missing. This code use the md RAID 6 code already
present in grub.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The original code which handles the recovery of a RAID 6 disks array
assumes that all reads are multiple of 1 << GRUB_DISK_SECTOR_BITS and it
assumes that all the I/O is done via the struct grub_diskfilter_segment.
This is not true for the btrfs code. In order to reuse the native
grub_raid6_recover() code, it is modified to not call
grub_diskfilter_read_node() directly, but to call an handler passed
as an argument.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add support for recovery for a RAID 5 btrfs profile. In addition
it is added some code as preparatory work for RAID 6 recovery code.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Move the code in charge to read the data from disk into a separate
function. This helps to separate the error handling logic (which
depends on the different raid profiles) from the read from disk
logic. Refactoring this code increases the general readability too.
This is a preparatory patch, to help the adding of the RAID 5/6 recovery code.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A portion of the logging code is moved outside of internal for(;;). The part
that is left inside is the one which depends on the internal for(;;) index.
This is a preparatory patch. The next one will refactor the code inside
the for(;;) into an another function.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently read from missing device triggers rescan. However, it is never
recorded that the device is missing. So, each read of a missing device
triggers rescan again and again. This behavior causes a lot of unneeded
rescans leading to huge slowdowns.
This patch fixes above mentioned issue. Information about missing devices
is stored in the data->devices_attached[] array as NULL value in dev
member. Rescan is triggered only if no information is found for a given
device. This means that only first time read triggers rescan.
The patch drops premature return. This way data->devices_attached[] is
filled even when a given device is missing.
Signed-off-by: Goffredo Baroncelli <kreikack@inwind.it>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The caller knows better if this error is fatal or not, i.e. another disk is
available or not.
This is a preparatory patch.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This helper is used in a few places to help the debugging. As
conservative approach the error is only logged.
This does not impact the error handling.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When booting from NVME SSD with 4k sector size, it fails with the message.
error: attempt to read or write outside of partition.
This patch fixes the problem by fixing overflow in converting partition start
and length into 512B blocks.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When reading data off a disk, sector values are based on the disk sector
length.
Within grub_util_fd_open_device(), the start of the partition was taken
directly from grub's partition information structure, which uses the
internal sector length (currently 512b), but never transformed to the
disk's sector length.
Subsequent calculations were all wrong for devices that have a diverging
sector length and the functions eventually skipped to the wrong stream
location, reading invalid data.
Signed-off-by: Mihai Moldovan <ionic@ionic.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Code later on checks if variables inside the struct are
0 to see if they have been set, like if there were addresses
in the bootpath.
The variables were not initialized however, so the check
might succeed with uninitialized data, and a new interface
with random addresses and the same name is added. This causes
$net_default_mac to point to the random one, so, for example,
using that variable to load per-mac config files fails.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1785859
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is a cryptographically signed message in MIME format.
Date: Thu, 9 Aug 2018 07:27:35 +0200
Currently, the GRUB payload for coreboot does not detect the Western
Digital hard disk WDC WD20EARS-60M AB51 connected to the ASRock E350M1,
as that takes over ten seconds to spin up.
```
disk/ahci.c:533: port 0, err: 0
disk/ahci.c:539: port 0, err: 0
disk/ahci.c:543: port 0, err: 0
disk/ahci.c:549: port 0, offset: 120, tfd:80, CMD: 6016
disk/ahci.c:552: port 0, err: 0
disk/ahci.c:563: port 0, offset: 120, tfd:80, CMD: 6016
disk/ahci.c:566: port: 0, err: 0
disk/ahci.c:593: port 0 is busy
disk/ahci.c:621: cleaning up failed devs
```
GRUB detects the drive, when either unloading the module *ahci*, and
then loading it again, or when doing a warm reset.
As the ten second time-out is too short, increase it to 32 seconds,
used by SeaBIOS. which detects the drive successfully.
The AHCI driver in libpayload uses 30 seconds, and that time-out was
added in commit 354066e1 (libpayload: ahci: Increase timeout for
signature reading) with the description below.
> We can't read the drives signature before it's ready, i.e. spun up.
> So set the timeout to the standard 30s. Also put a notice on the
> console, so the user knows why the signature reading failed.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
1. move relocator related code more close to each other
2. use variable "len" since it has correct assignment, and keep coding
style with upper code
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Delete local copy of function to determine required buffer size for the
UEFI memory map, use helper in kern/efi/mm.c.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Delete local copy of function to determine required buffer size for the
UEFI memory map, use helper in kern/efi/mm.c.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Delete local copy of function to determine required buffer size for the
UEFI memory map, use helper in kern/efi/mm.c.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Commit 0ba90a7f01 ("efi: Move grub_reboot() into kernel") broke
the build on i386-efi - genmoddep.awk bails out with message
grub_reboot in reboot is duplicated in kernel
This is because both lib/i386/reset.c and kern/efi/efi.c now provide
this function.
Rather than explicitly list each i386 platform variant in
Makefile.core.def, include the contents of lib/i386/reset.c only when
GRUB_MACHINE_EFI is not set.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The 32-bit arm Linux kernel is built as a zImage, which self-decompresses
down to near start of RAM. In order for an initrd/initramfs to be
accessible, it needs to be placed within the first ~768MB of RAM.
The initrd loader built into the kernel EFI stub restricts this down to
512MB for simplicity - so enable the same restriction in grub.
For arm64, the requirement is within a 1GB aligned 32GB window also
covering the (runtime) kernel image. Since the EFI stub loader itself
will attempt to relocate to near start of RAM, force initrd to be loaded
completely within the first 32GB of RAM.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The 32-bit arm efi port now shares the 64-bit linux loader, so delete
the now unused bits from the 32-bit linux loader.
This in turn leaves the grub-core/kern/arm/efi/misc.c unused, so
delete that too.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The arm64 and arm linux kernel EFI-stub support presents pretty much
identical interfaces, so the same linux loader source can be used for
both architectures.
Switch 32-bit ARM UEFI platforms over to the existing EFI-stub aware
loader initially developed for arm64.
This *WILL* stop non-efistub Linux kernels from booting on arm-efi.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In preparation for using the linux loader for 32-bit and 64-bit platforms,
rename grub_arm64*/GRUB_ARM64* to grub_armxx*/GRUB_ARMXX*.
Move prototypes for now-common functions to efi/efi.h.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Since ARM platforms do not have a common memory map, add a helper
function that finds the lowest address region with the EFI_MEMORY_WB
attribute set in the UEFI memory map.
Required for the arm64 efi linux loader to restrict the initrd
location to where it will be accessible by the kernel at runtime.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are several implementations of this function in the tree.
Add a central version in grub-core/efi/mm.c.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EFI Graphics Output Protocol can return a 64-bit
linear frame buffer address in some firmware/BIOS
implementations. We currently only store the lower
32-bits in the lfb_base. This will eventually be
passed to Linux kernel and the efifb driver will
incorrectly interpret the framebuffer address as
32-bit address.
The Linux kernel has already added support to handle
64-bit linear framebuffer address in the efifb driver
since quite some time now.
This patch adds the support for 64-bit linear frame
buffer address in GRUB to address the above mentioned
scenario.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Clean up code for matching IS_ARM64 slightly by making use of struct
linux_arm64_kernel_header and GRUB_LINUX_ARM64_MAGIC_SIGNATURE.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Clean up code for matching IS_ARM slightly by making use of struct
linux_arm_kernel_header and GRUB_LINUX_ARM_MAGIC_SIGNATURE.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Most 8" or 7" x86 Windows 10 tablets come with volume up/down buttons and
a power-button. In their UEFI these are almost always mapped to arrow
up/down and enter.
Pressing the volume buttons (sometimes by accident) will stop the
menu countdown, but the power-button / "enter" key was not being recognized
as enter, so the user would be stuck at the grub menu.
The problem is that these tablets send scan_code 13 or 0x0d for the
power-button, which officialy maps to the F3 key. They also set
unicode_char to 0x0d.
This commit recognizes the special case of both scan_code and unicode_char
being set to 0x0d and treats this as an enter key press.
This fixes things getting stuck at the grub-menu and allows the user
to choice a grub-menu entry using the buttons on the tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Without that fix we have:
In file included from ../../include/grub/command.h:25:0,
from ../../grub-core/loader/multiboot.c:30:
../../grub-core/loader/multiboot_elfxx.c: In function 'grub_multiboot_load_elf64':
../../grub-core/loader/multiboot_elfxx.c:130:28: error: 'relocatable' undeclared (first use in this function)
"load_base_addr=0x%x\n", relocatable,
This happens due to mistake in the commit 14ec665
(mbi: Use per segment a separate relocator chunk).
So, let's fix it.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
When booting an arm* system on UEFI with an empty device tree (currently
only when hardware description comes from ACPI), we don't currently set
default to 1 cell (32 bits).
Set both of these properties, to 2 cells (64 bits), to resolve issues
with kexec on some platforms.
This change corresponds with linux kernel commit ae8a442dfdc4
("efi/libstub/arm*: Set default address and size cells values for an empty dtb")
and ensures booting through grub does not behave differently from booting
the stub loader directly.
See also https://patchwork.kernel.org/patch/9561201/
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
To be able to resuse the prop_entry_size macro, move it to
<grub/fdt.h> and rename it grub_fdt_prop_entry_size.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Instead of setting up a all comprising relocator chunk for all segments,
use per segment a separate relocator chunk.
Currently, if the ELF is non-relocatable, a single relocator chunk will
comprise memory (between the segments) which gets overridden by the relst()
invocation of the movers code in grub_relocator16/32/64_boot().
The overridden memory may contain reserved ranges like VGA memory or ACPI
tables, which may lead to crashes or at least to strange boot behaviour.
Signed-off-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The sparse inode metadata format became a mkfs.xfs default in
xfsprogs-4.16.0, and such filesystems are now rejected by grub as
containing an incompatible feature.
In essence, this feature allows xfs to allocate inodes into fragmented
freespace. (Without this feature, if xfs could not allocate contiguous
space for 64 new inodes, inode creation would fail.)
In practice, the disk format change is restricted to the inode btree,
which as far as I can tell is not used by grub. If all you're doing
today is parsing a directory, reading an inode number, and converting
that inode number to a disk location, then ignoring this feature
should be fine, so I've added it to XFS_SB_FEAT_INCOMPAT_SUPPORTED
I did some brief testing of this patch by hacking up the regression
tests to completely fragment freespace on the test xfs filesystem, and
then write a large-ish number of inodes to consume any existing
contiguous 64-inode chunk. This way any files the grub tests add and
traverse would be in such a fragmented inode allocation. Tests passed,
but I'm not sure how to cleanly integrate that into the test harness.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Chris Murphy <lists@colorremedies.com>
This patch ensures that grub-probe will find the root device placed in
/dev/mapper/dm-[0-9]+-.* e.g. device named /dev/mapper/dm-0-luks will be
found and grub.cfg will be updated properly, enabling the system to boot.
Signed-off-by: Oleg Solovyov <mcpain@altlinux.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Rounding up the bufio->block_size to meet power of 2 to facilitate next_buf
calculation in grub_bufio_read().
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Rename grub_gpt_part_type to grub_gpt_part_guid and update grub_gpt_partentry
to use this type for both the partition type GUID string and the partition GUID
string entries. This change ensures that the two GUID fields are handled more
consistently and helps to simplify the changes needed to add Linux partition
GUID support.
Signed-off-by: Nicholas Vinson <nvinson234@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
diskboot.img now is loaded at 0x8000 and is jumped to with 0:0x8000.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
"F2FS (Flash-Friendly File System) is flash-friendly file system which was merged
into Linux kernel v3.8 in 2013.
The motive for F2FS was to build a file system that from the start, takes into
account the characteristics of NAND flash memory-based storage devices (such as
solid-state disks, eMMC, and SD cards).
F2FS was designed on a basis of a log-structured file system approach, which
remedies some known issues of the older log structured file systems, such as
the snowball effect of wandering trees and high cleaning overhead. In addition,
since a NAND-based storage device shows different characteristics according to
its internal geometry or flash memory management scheme (such as the Flash
Translation Layer or FTL), it supports various parameters not only for
configuring on-disk layout, but also for selecting allocation and cleaning
algorithm.", quote by https://en.wikipedia.org/wiki/F2FS.
The source codes for F2FS are available from:
http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs.githttp://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs-tools.git
This patch has been integrated in OpenMandriva Lx 3.
https://www.openmandriva.org/
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Pete Batard <pete@akeo.ie>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When building with GCC 8, there are several errors regarding packed-not-aligned.
./include/grub/gpt_partition.h:79:1: error: alignment 1 of ‘struct grub_gpt_partentry’ is less than 8 [-Werror=packed-not-aligned]
This patch fixes the build error by cleaning up the ambiguity of placing
aligned structure in a packed one. In "struct grub_btrfs_time" and "struct
grub_gpt_part_type", the aligned attribute seems to be superfluous, and also
has to be packed, to ensure the structure is bit-to-bit mapped to the format
laid on disk. I think we could blame to copy and paste error here for the
mistake. In "struct efi_variable", we have to use grub_efi_packed_guid_t, as
the name suggests. :)
Signed-off-by: Michael Chang <mchang@suse.com>
Tested-by: Michael Chang <mchang@suse.com>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A GPU inserted into a PCIe I/O slot disappears during system startup.
The problem centers around GRUB and a specific VGA init function in
efi_uga.c. This causes an LER (Link Error Recorvery) because the MMIO
memory has not been enabled before attempting access.
The fix is to add the same coding used in other VGA drivers, specifically
to add a check to insure that it is indeed a VGA controller. And then
enable the MMIO address space with the specific bits.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Read from NULL pointer canon in function grub_machine_get_bootlocation().
Function grub_ieee1275_canonicalise_devname() may return NULL.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Split up some of the functionality in grub_machine_get_bootlocation into
grub_ieee1275_get_boot_dev. This will allow for code reuse in a follow on
patch.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
These fields must reflect the ROM-BIOS's geometry for CHS-based
loaders to correctly load their next stage. Most loaders do not
query the ROM-BIOS (Int13.08), relying on the BPB fields to hold
the correct values already.
Tested with lDebug booted in qemu via grub2's
FreeDOS direct loading support, refer to
https://bitbucket.org/ecm/ldosboot + https://bitbucket.org/ecm/ldebug
(For this test, lDebug's iniload.asm must be assembled with
-D_QUERY_GEOMETRY=0 to leave the BPB values provided by grub.)
Signed-off-by: C. Masloch <pushbx@38.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Return the 64bit number of blocks of storage associated with the device or
instance. Where a "block" is a unit of storage consisting of the number of
bytes returned by the package's "block-size" method. If the size cannot be
determined, or if the number of blocks exceeds the range return -1.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Return the number of blocks of storage associated with the device or
instance. Where a "block" is a unit of storage consisting of the number
of bytes returned by the package's "block-size" method. If the size cannot
be determined, the #blocks method returns the maximum unsigned integer
(which, because of Open Firmware's assumption of two's complement arithmetic,
is equivalent to the signed number -1). If the number of blocks exceeds
the range of an unsigned number, return 0 to alert the caller to try
the #blocks64 command.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
