Commit graph

11 commits

Author SHA1 Message Date
Peter Jones
d5a32255de misc: Make grub_strtol() "end" pointers have safer const qualifiers
Currently the string functions grub_strtol(), grub_strtoul(), and
grub_strtoull() don't declare the "end" pointer in such a way as to
require the pointer itself or the character array to be immutable to the
implementation, nor does the C standard do so in its similar functions,
though it does require us not to change any of it.

The typical declarations of these functions follow this pattern:

long
strtol(const char * restrict nptr, char ** restrict endptr, int base);

Much of the reason for this is historic, and a discussion of that
follows below, after the explanation of this change.  (GRUB currently
does not include the "restrict" qualifiers, and we name the arguments a
bit differently.)

The implementation is semantically required to treat the character array
as immutable, but such accidental modifications aren't stopped by the
compiler, and the semantics for both the callers and the implementation
of these functions are sometimes also helped by adding that requirement.

This patch changes these declarations to follow this pattern instead:

long
strtol(const char * restrict nptr,
       const char ** const restrict endptr,
       int base);

This means that if any modification to these functions accidentally
introduces either an errant modification to the underlying character
array, or an accidental assignment to endptr rather than *endptr, the
compiler should generate an error.  (The two uses of "restrict" in this
case basically mean strtol() isn't allowed to modify the character array
by going through *endptr, and endptr isn't allowed to point inside the
array.)

It also means the typical use case changes to:

  char *s = ...;
  const char *end;
  long l;

  l = strtol(s, &end, 10);

Or even:

  const char *p = str;
  while (p && *p) {
	  long l = strtol(p, &p, 10);
	  ...
  }

This fixes 26 places where we discard our attempts at treating the data
safely by doing:

  const char *p = str;
  long l;

  l = strtol(p, (char **)&ptr, 10);

It also adds 5 places where we do:

  char *p = str;
  while (p && *p) {
	  long l = strtol(p, (const char ** const)&p, 10);
	  ...
	  /* more calls that need p not to be pointer-to-const */
  }

While moderately distasteful, this is a better problem to have.

With one minor exception, I have tested that all of this compiles
without relevant warnings or errors, and that /much/ of it behaves
correctly, with gcc 9 using 'gcc -W -Wall -Wextra'.  The one exception
is the changes in grub-core/osdep/aros/hostdisk.c , which I have no idea
how to build.

Because the C standard defined type-qualifiers in a way that can be
confusing, in the past there's been a slow but fairly regular stream of
churn within our patches, which add and remove the const qualifier in many
of the users of these functions.  This change should help avoid that in
the future, and in order to help ensure this, I've added an explanation
in misc.h so that when someone does get a compiler warning about a type
error, they have the fix at hand.

The reason we don't have "const" in these calls in the standard is
purely anachronistic: C78 (de facto) did not have type qualifiers in the
syntax, and the "const" type qualifier was added for C89 (I think; it
may have been later).  strtol() appears to date from 4.3BSD in 1986,
which means it could not be added to those functions in the standard
without breaking compatibility, which is usually avoided.

The syntax chosen for type qualifiers is what has led to the churn
regarding usage of const, and is especially confusing on string
functions due to the lack of a string type.  Quoting from C99, the
syntax is:

 declarator:
  pointer[opt] direct-declarator
 direct-declarator:
  identifier
  ( declarator )
  direct-declarator [ type-qualifier-list[opt] assignment-expression[opt] ]
  ...
  direct-declarator [ type-qualifier-list[opt] * ]
  ...
 pointer:
  * type-qualifier-list[opt]
  * type-qualifier-list[opt] pointer
 type-qualifier-list:
  type-qualifier
  type-qualifier-list type-qualifier
 ...
 type-qualifier:
  const
  restrict
  volatile

So the examples go like:

const char foo;			// immutable object
const char *foo;		// mutable pointer to object
char * const foo;		// immutable pointer to mutable object
const char * const foo;		// immutable pointer to immutable object
const char const * const foo; 	// XXX extra const keyword in the middle
const char * const * const foo; // immutable pointer to immutable
				//   pointer to immutable object
const char ** const foo;	// immutable pointer to mutable pointer
				//   to immutable object

Making const left-associative for * and right-associative for everything
else may not have been the best choice ever, but here we are, and the
inevitable result is people using trying to use const (as they should!),
putting it at the wrong place, fighting with the compiler for a bit, and
then either removing it or typecasting something in a bad way.  I won't
go into describing restrict, but its syntax has exactly the same issue
as with const.

Anyway, the last example above actually represents the *behavior* that's
required of strtol()-like functions, so that's our choice for the "end"
pointer.

Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2020-02-28 12:41:29 +01:00
Marek Marczykowski-Górecki
67580c0068 xen: Look for Xen notes in section headers too
Mirror behaviour of ELF loader in libxc: first look for Xen notes in
PT_NOTE segment, then in SHT_NOTE section and only then fallback to
a section with __xen_guest name. This fixes loading PV kernels that
Xen note have outside of PT_NOTE. While this may be result of a buggy
linker script, loading such kernel directly works fine, so make it work
with GRUB too. Specifically, this applies to binaries built from Unikraft.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2019-03-19 11:38:29 +01:00
Juergen Gross
0de3eeb623 xen: add capability to load p2m list outside of kernel mapping
Modern pvops linux kernels support a p2m list not covered by the
kernel mapping. This capability is flagged by an elf-note specifying
the virtual address the kernel is expecting the p2m list to be mapped
to.

In case the elf-note is set by the kernel don't place the p2m list
into the kernel mapping, but map it to the given address. This will
allow to support domains with larger memory, as the kernel mapping is
limited to 2GB and a domain with huge memory in the TB range will have
a p2m list larger than this.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2016-10-27 16:22:06 +02:00
Juergen Gross
5500cefccd xen: add capability to load initrd outside of initial mapping
Modern pvops linux kernels support an initrd not covered by the initial
mapping. This capability is flagged by an elf-note.

In case the elf-note is set by the kernel don't place the initrd into
the initial mapping. This will allow to load larger initrds and/or
support domains with larger memory, as the initial mapping is limited
to 2GB and it is containing the p2m list.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2016-10-27 16:22:06 +02:00
Juergen Gross
7e5fcb0b34 xen: add elfnote.h to avoid using numbers instead of constants
Various features and parameters of a pv-kernel are specified via
elf notes in the kernel image. Those notes are part of the interface
between the Xen hypervisor and the kernel.

Instead of using num,bers in the code when interpreting the elf notes
make use of the header supplied by Xen for that purpose.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2016-10-27 16:21:25 +02:00
Juergen Gross
c69d1858f1 xen: avoid memleaks on error
When loading a Xen pv-kernel avoid memory leaks in case of errors.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2016-10-27 16:17:15 +02:00
Andrei Borzenkov
3173c7501c grub-core/loader/i386/xen_fileXX.c: memory leak in grub_xen_get_infoXX
CID: 73645, 73782
2014-12-01 21:23:54 +03:00
Andrey Borzenkov
f371dd5da8 fix include loop on MinGW due to libintl.h pulling stdio.h
In file included from ./include/grub/dl.h:23:0,
                 from grub-core/lib/libgcrypt-grub/cipher/rfc2268.c:3:
./include/grub/list.h:34:18: warning: conflicting types for 'grub_list_push' [en
abled by default]
 void EXPORT_FUNC(grub_list_push) (grub_list_t *head, grub_list_t item);
                  ^
./include/grub/symbol.h:68:25: note: in definition of macro 'EXPORT_FUNC'
 # define EXPORT_FUNC(x) x
                         ^
In file included from ./include/grub/fs.h:30:0,
                 from ./include/grub/file.h:25,
                 from ./grub-core/lib/posix_wrap/stdio.h:23,
                 from c:\mingw\include\libintl.h:314,
                 from ./include/grub/i18n.h:33,
                 from ./include/grub/misc.h:27,
                 from ./include/grub/list.h:25,
                 from ./include/grub/dl.h:28,
                 from grub-core/lib/libgcrypt-grub/cipher/rfc2268.c:3:
./include/grub/partition.h:106:3: note: previous implicit declaration of 'grub_l
ist_push' was here
   grub_list_push (GRUB_AS_LIST_P (&grub_partition_map_list),
   ^
list.h needs just ATTRIBUTE_ERROR from misc.h; split compiler features
into separate file grub/compiler.h and include it instead.
2014-01-18 21:22:57 +04:00
Vladimir Serbinenko
9246d5c8a4 * grub-core/commands/fileXX.c: Silence cast-align.
* grub-core/loader/i386/xen_fileXX.c: Likewise.
2013-12-18 07:40:43 +01:00
Vladimir Serbinenko
1123bed944 * grub-core/loader/i386/xen_fileXX.c: Silence cast-align. 2013-12-17 20:47:31 +01:00
Vladimir Serbinenko
9612ebc00e Add new ports: i386-xen and x86_64-xen. This allows running GRUB in
XEN PV environment and load kernels.
2013-11-09 21:29:11 +01:00