slots are of type grub_ieee1275_cell_t.
(grub_nand_read): Likewise.
* kern/ieee1275/ieee1275.c (IEEE1275_PHANDLE_INVALID,
IEEE1275_IHANDLE_INVALID): Use grub_ieee1275_cell_t since these
macros are used to compare values in arg/ret block of the call.
(grub_ieee1275_finddevice, grub_ieee1275_get_property,
grub_ieee1275_next_property, grub_ieee1275_get_property_length,
grub_ieee1275_instance_to_package, grub_ieee1275_package_to_path,
grub_ieee1275_instance_to_path, grub_ieee1275_write,
grub_ieee1275_read, grub_ieee1275_seek, grub_ieee1275_peer,
grub_ieee1275_child, grub_ieee1275_parent, grub_ieee1275_open,
grub_ieee1275_close, grub_ieee1275_set_property,
grub_ieee1275_set_color): All ieee1275 call arg slots are of type
grub_ieee1275_cell_t.
* kern/ieee1275/openfw.c (grub_map): Likewise.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_ihandle_t,
grub_ieee1275_phandle_t): Define as grub_unit32_t type.
Reapply fix from 2008-07-28 which was accidentally reverted; also
perform the same fix to a similar check in same function.
* disk/raid.c (grub_raid_scan_device): Do not abort when two disks
with the same number are found, just use issue a warning with
grub_dprintf(), as this error has been reported to be non-fatal.
Leak fixes
* kern/disk.c (grub_disk_cache_store): Invalidate previous cache
in case of collision
* disk/scsi.c (grub_scsi_open): free scsi in case of error
* disk/ata.c (grub_ata_wait_status): Replace by ...
(grub_ata_wait_not_busy): ... this function. Checks only BSY bit,
other status bits may be invalid while BSY is asserted.
(grub_ata_check_ready): New function.
(grub_ata_cmd): Removed.
(grub_ata_wait_drq): New function.
(grub_ata_strncpy): Remove inline.
(grub_ata_pio_read): Reduce to actual block transfer. BSY wait
and error check now done by grub_ata_wait_drq ().
(grub_ata_pio_write): Likewise.
(grub_atapi_identify): Set DEV before check for !BSY. Use
grub_ata_wait_drq () to wait for data.
(grub_ata_device_initialize): Add status register check to
detect missing SATA slave devices. Add debug messages.
(grub_atapi_wait_drq): Use grub_ata_wait_not_busy ().
(grub_atapi_packet): Set DEV before check for !BSY. Replace
transfer loop by grub_ata_pio_write ().
(grub_ata_identify): Set DEV before check for !BSY. Use
grub_ata_wait_drq () to wait for data.
(grub_ata_setaddress): Set DEV before check for !BSY.
(grub_ata_readwrite): Remove duplicate code, handle batch/rest and
read/write in one loop. Fix invalid command on write. Fix incomplete
command on (size % batch) == 0. Add missing error check after write of
last block. Add debug messages.
(grub_atapi_read): Replace transfer loop by grub_ata_pio_read ().
* disk/ata.c (GRUB_ATAPI_REG_*): New defines.
(GRUB_ATAPI_IREASON_*): Likewise.
(grub_ata_pio_write): Fix timeout error return.
(grub_atapi_identify): Add grub_ata_wait () after cmd.
(grub_atapi_wait_drq): New function.
(grub_atapi_packet): New parameter `size'.
Use grub_atapi_wait_drq () and direct write instead of
grub_ata_pio_write ().
(grub_atapi_read): Replace grub_ata_pio_read () by a loop which
reads the number of bytes requested by the device for each DRQ
assertion.
(grub_atapi_write): Remove old implementation, return not
implemented instead.
* disk/scsi.c (grub_scsi_read10): Use scsi->blocksize instead
of 512 to calculate data size.
(grub_scsi_read12): Likewise.
(grub_scsi_write10): Likewise.
(grub_scsi_write12): Likewise.
(grub_scsi_read): Adjust size according to blocksize.
Add checks for invalid blocksize and unaligned transfer.
* disk/ata.c (enum grub_ata_commands): Remove EXEC_DEV_DIAGNOSTICS.
(enum grub_ata_timeout_milliseconds): New enum.
(grub_ata_wait_status): Add parameter milliseconds.
(grub_ata_cmd): Remove variable `err'. Remove wait for !DRQ to allow
recovery from timed-out commands.
(grub_ata_pio_read): Add parameter milliseconds. Fix error return,
return grub_errno instead of REG_ERROR.
(grub_ata_pio_write): Add parameter milliseconds.
(grub_atapi_identify): Fix size of ATAPI IDENTIFY sector.
Pass milliseconds to grub_ata_wait_status () and
grub_ata_pio_read ().
(grub_atapi_packet): Pass milliseconds to grub_ata_pio_write ().
(grub_ata_identify): Remove variable `ataerr'. Pass milliseconds to
grub_ata_wait_status (). Fix IDENTIFY timeout check.
(grub_ata_device_initialize): Remove EXECUTE DEVICE DIAGNOSTICS.
It is not suitable for device detection, because DEV bit is ignored,
the command may run too long, and not all devices set the signature
properly.
(grub_ata_pciinit): Clear grub_errno before grub_ata_device_initialize ().
(grub_ata_setaddress): Pass milliseconds to grub_ata_wait_status ().
Fix device selection, DEV bit must be set first to address the registers
of the correct device.
(grub_ata_readwrite): Pass milliseconds to grub_ata_wait_status () and
grub_ata_pio_read/write ().
(grub_atapi_read): Pass milliseconds to grub_ata_pio_read ().
(grub_atapi_write): Pass milliseconds to grub_ata_pio_write ().
* disk/lvm.c (grub_lvm_scan_device): Fix possible NULL value handling
(add a missing NULL check, and correct them by moving the pointer
operations after the actual check).
* disk/lvm.c (grub_lvm_scan_device): Allocate buffer space for the
circular metadata worst case scenario. If the metadata is circular
then copy the wrap in place.
* include/grub/lvm.h: Add GRUB_LVM_MDA_HEADER_SIZE, from the LVM2
project lib/format_text/layout.h
Circular metadata bug found and patch debugged by Jan Derk Gerlings.
* disk/ata.c (grub_apapi_open): Initialize devfnd, no need to set
scsi->name and scsi->luns, as they will be set in grub_scsi_open.
* disk/scsi.c (grub_scsi_open): Don't call p->close (scsi) here when
error occurs, as grub_disk_open will call grub_disk_close, which will
call p->close (scsi).
* conf/common.rmk (grub_probe_SOURCES): Add disk/mdraid_linux.c.
(grub_fstest_SOURCES): Add disk/raid5_recover.c, disk/raid6_recover.c,
disk/mdraid_linux.c and disk/dmraid_nvidia.c and lib/crc.c.
(pkglib_MODULES): Add raid5rec.mod, raid6rec.mod, mdraid.mod and
dm_nv.mod.
(raid5rec_mod_SOURCES): New macro.
(raid5rec_mod_CFLAGS): Likewise.
(raid5rec_mod_LDFLAGS): Likewise.
(raid6rec_mod_SOURCES): Likewise.
(raid6rec_mod_CFLAGS): Likewise.
(raid6rec_mod_LDFLAGS): Likewise.
(mdraid_mod_SOURCES): Likewise.
(mdraid_mod_CFLAGS): Likewise.
(mdraid_mod_LDFLAGS): Likewise.
(dm_nv_mod_SOURCES): Likewise.
(dm_nv_mod_CFLAGS): Likewise.
(dm_nv_mod_LDFLAGS): Likewise.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add disk/mdraid_linux.c.
(grub_emu_SOURCES): Add disk/raid5_recover.c, disk/raid6_recover.c,
disk/mdraid_linux.c and disk/dmraid_nvidia.c.
* conf/i386-coreboot.rmk (grub_emu_SOURCES): Add disk/raid5_recover.c,
disk/raid6_recover.c, disk/mdraid_linux.c and disk/dmraid_nvidia.c.
* conf/i386-efi.rmk (grub_emu_SOURCES): Likewise.
* conf/x86_64-efi.rmk (grub_emu_SOURCES): Likewise.
* conf/i386-ieee1275.rmk (grub_emu_SOURCES): Likewise.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Likewise.
* disk/raid5_recover.c: New file.
* disk/raid6_recover.c: Likewise.
* disk/mdraid_linux.c: Likewise.
* disk/dmraid_nvidia.c: Likewise.
* disk/i386/pc/biosdisk.c: Set total_sectors of cdrom device to
ULONG_MAX.
* disk/raid.c (grub_raid_open): Use the size of the smallest disk to
calculate the size of raid device.
(grub_raid_read): Simplify raid0 code. Support raid4, raid6 and four
different layout of raid5.
(grub_raid_scan_device): Remove code specific to mdraid.
(grub_raid_list): New variable.
(free_array): New function.
(grub_raid_register): Likewise.
(grub_raid_unregister): Likewise.
(grub_raid_rescan): Likewise.
(GRUB_MOD_INIT): Don't iterate device here.
(GRUB_MOD_FINI): Use free_array to release resource.
* include/grub/raid.h: Remove macro and structure specific to mdraid.
(grub_raid5_recover_func_t): New function variable type.
(grub_raid6_recover_func_t): Likewise.
(grub_raid5_recover_func): New variable.
(grub_raid6_recover_func): Likewise.
(grub_raid_register): New function.
(grub_raid_unregister): Likewise.
(grub_raid_rescan): Likewise.
(grub_raid_block_xor): Likewise.
* util/grub-fstest.c: Add #include <grub/raid.h> and <grub/lib/crc.h>.
(CMD_CRC): New macro.
(part): Removed.
(read_file): Handle device as well as file.
(cmd_crc): New function.
(fstest): Handle multiple disks.
(options): Remove part, raw and long, add root and diskcount.
(usage): Add crc, remove -p, -r, -l, add -r and -c.
(main): Find the first non option entry and ignore subsequence options,
add handling for the new options, support multiple disks.
* util/grub-probe.c (probe): Add mdraid to abstraction_name.
* disk/ata.c (grub_ata_regget): Change return type to
`grub_uint8_t'.
(grub_ata_regget2): Likewise.
(grub_ata_wait_status): New function.
(grub_ata_wait_busy): Removed function, updated all users to use
`grub_ata_wait_status'.
(grub_ata_wait_drq): Likewise.
(grub_ata_cmd): New function.
(grub_ata_pio_read): Change return type to `grub_uint8_t'. Add
error handling.
(grub_ata_pio_write): Add error handling.
(grub_atapi_identify): Likewise.
(grub_atapi_packet): Use `grub_ata_cmd' and improve error
handling.
(grub_ata_identify): Use `grub_ata_cmd' and improve error
handling. Actually use the detected registers. Reorder the
detection logic such that it is easier to read.
(grub_ata_pciinit): Do not assign the same ID to each controller.
(grub_ata_setaddress): Use `grub_ata_cmd' and improve error
handling.
(grub_atapi_readsector): Check the result of `grub_ata_pio_read'.
* include/grub/err.h (grub_err_t): Add `GRUB_ERR_TIMEOUT'.
* disk/memdisk.c (memdisk_size): Don't initialize.
(GRUB_MOD_INIT(memdisk)): Find memdisk using grub_module_iterate().
* include/grub/i386/pc/kernel.h
(GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE): Remove macro.
(GRUB_KERNEL_MACHINE_PREFIX, GRUB_KERNEL_MACHINE_DATA_END): Shift.
(grub_memdisk_image_size, grub_arch_memdisk_addr)
(grub_arch_memdisk_size): Remove.
* include/grub/kernel.h (struct grub_module_header): Remove `offset'
field (was only used to transfer a constant). Add `type' field to
support multiple module types.
(grub_module_iterate): New function.
* kern/device.c (grub_device_open): Do not hide error messages
when grub_disk_open() fails. Use grub_print_error() instead.
* kern/i386/pc/init.c (grub_arch_modules_addr)
(grub_arch_memdisk_size): Remove functions.
(grub_arch_modules_addr): Return the module address in high memory
(now that it isn't copied anymore).
* kern/i386/pc/startup.S (grub_memdisk_image_size): Remove variable.
(codestart): Don't add grub_memdisk_image_size to %ecx in LZMA
decompression routine (grub_total_module_size already includes that
now). Don't copy modules back to low memory.
* kern/main.c: Include `<grub/mm.h>'.
(grub_load_modules): Split out (and use) ...
(grub_module_iterate): ... this function, which iterates through
module objects and runs a hook.
Comment out grub_mm_init_region() call, as it would cause non-ELF
modules to be overwritten.
* util/i386/pc/grub-mkimage.c (generate_image): Instead of appending
the memdisk image in its own region, make it part of the module list.
* util/elf/grub-mkimage.c (options): Add "memdisk"|'m' option.
(main): Parse --memdisk|-m option, and pass user-provided path as
parameter to generate_image().
(add_segments): Pass `memdisk_path' down to load_modules().
(load_modules): Embed memdisk image in module section when requested.
* util/i386/efi/grub-mkimage.c (make_mods_section): Initialize
`header.type' instead of `header.offset'.
* conf/powerpc-ieee1275.rmk (pkglib_MODULES): Add `memdisk.mod'.
(memdisk_mod_SOURCES, memdisk_mod_CFLAGS)
(memdisk_mod_LDFLAGS): New variables.
* conf/i386-coreboot.rmk: Likewise.
* conf/i386-ieee1275.rmk: Likewise.
* disk/raid.c (grub_raid_scan_device): Do not abort when two disks
with the same number are found, just use issue a warning with
grub_dprintf(), as this error has been reported to be non-fatal.
This fixes a performance issue when pc & gpt partmap iterators
didn't abort iteration even after our hook found what it was
looking for (often causing expensive probes of non-existant drives).
Some callers relied on previous buggy behaviour, since they would
rise an error when their own hooks caused early abortion of its
iteration.
* kern/device.c (grub_device_open): Improve error message.
* disk/lvm.c (grub_lvm_open): Likewise.
* disk/raid.c (grub_raid_open): Likewise.
* partmap/pc.c (pc_partition_map_iterate): Abort parent iteration
when hook requests it, independently of grub_errno.
(pc_partition_map_probe): Do not fail when find_func() caused
early abortion of pc_partition_map_iterate().
* partmap/gpt.c (gpt_partition_map_iterate): Abort parent iteration
when hook requests it, independently of grub_errno.
(gpt_partition_map_probe): Do not fail when find_func() caused
early abortion of gpt_partition_map_iterate().
* kern/partition.c (grub_partition_iterate): Abort parent iteration
when hook requests it, independently of grub_errno. Do not fail when
part_map_iterate_hook() caused early abortion of p->iterate().
* util/biosdisk.c (grub_util_biosdisk_get_grub_dev): Do not fail
when grub_partition_iterate() returned with non-zero.
* disk/ata.c (grub_ata_pio_write): Check status before writing,
like we do in grub_ata_pio_read().
(grub_ata_readwrite): Always write individual sectors. Fix the
sector count for the remainder.
(grub_ata_write): Enable writing to ATA devices. Correctly
report error for ATAPI devices.
* disk/ata.c (grub_ata_readwrite): Don't increment sector number
for every read sector, we already increment it for the whole
batch. This fixes reading more than 256 sectors at once.
* disk/raid.c: Cast grub_dprintf() arguments to unsigned long
long if the format specifier expects it.
* partmap/gpt.c (gpt_partition_map_iterate): Likewise.
* partmap/pc.c (pc_partition_map_iterate): Likewise.
* fs/ntfs.c (grub_ntfs_uuid): Cast data->uuid to unsigned long
long to fix a warning.
* fs/reiserfs.c (grub_reiserfs_read): Change casts in
grub_dprintf() arguments to fix warnings.
* disk/i386/pc/biosdisk.c (grub_biosdisk_iterate): Iterate through
floppies after everything else, to ensure floppy drive isn't accessed
unnecessarily (patch from Bean).
* Makefile.in (RMKFILES): Add missing arch i386-ieee1275 and
i386-linuxbios.
* commands/hexdump.c (grub_cmd_hexdump): Support dumping of device,
change the buffer size to 4096 for cdrom device.
* conf/i386-ieee1275.rmk (pkglib_MODULES): Add _linux.mod, linux.mod
and nand.mod.
(_linux_mod_SOURCES): New variable.
(_linux_mod_CFLAGS): Likewise.
(_linux_mod_LDFLAGS): Likewise.
(linux_mod_SOURCES): Likewise.
(linux_mod_CFLAGS): Likewise.
(linux_mod_LDFLAGS): Likewise.
(nand_mod_SOURCES): Likewise.
(nand_mod_CFLAGS): Likewise.
(nand_mod_LDFLAGS): Likewise.
* disk/ieee1275/ofdisk.c (grub_ofdisk_open): Return
GRUB_ERR_UNKNOWN_DEVICE instead of GRUB_ERR_BAD_DEVICE if no device
type property. (nand device in olpc don't have this property)
* include/grub/disk.h (grub_disk_dev_id): New macro
GRUB_DISK_DEVICE_NAND_ID.
* include/grub/i386/ieee1275/loader.h (grub_rescue_cmd_linux): New
function prototype.
(grub_rescue_cmd_initrd): Likewise.
* include/grub/i386/linux.h (GRUB_LINUX_OFW_SIGNATURE): New macro.
(linux_kernel_params): Add new member ofw_signature, ofw_num_items,
ofw_cif_handler and ofw_idt, adjust padding number.
* include/grub/i386/pc/memory.h (grub_upper_mem): Export it if
GRUB_MACHINE_IEEE1275 is defined.
* include/grub/ieee1275/ieee1275.h (grub_available_iterate):
Use NESTED_FUNC_ATTR attribute on the hook parameter.
* kern/powerpc/ieee1275/init.c (grub_claim_heap): Use NESTED_FUNC_ATTR
on nested function heap_init.
(grub_upper_mem): New variable for i386-ieee1275.
(grub_get_extended_memory): New function for i386-ieee1275.
(grub_machine_init): Call grub_get_extended_memory for i386-ieee1275.
* kern/powerpc/ieee1275/openfw.c (grub_available_iterate): Use
NESTED_FUNC_ATTR on the hook parameter. Don't quit if no device type
property.
* loader/i386/ieee1275/linux.c: New file.
* loader/i386/ieee1275/linux_normal.c: New file.
* disk/ieee1275/nand.c: New file.
Improve robustness when handling LVM.
* disk/lvm.c (grub_lvm_getvalue): Return 0 when `*p' is NULL
(and leave `*p' unmodified).
(grub_lvm_iterate): Don't assume `vg->lvs != NULL' when iterating
through it.
(grub_lvm_memberlist): Don't assume `lv->vg->pvs != NULL' when
iterating through it.
(grub_lvm_open): Don't assume `vg->lvs != NULL' when iterating
through it.
(grub_lvm_scan_device): Check the return value (and fail gracefuly
when due) on each grub_lvm_getvalue() or grub_strstr() call.
Don't assume `vg->pvs != NULL' when iterating through it.
* disk/ata.c (grub_ata_open): Don't lose precision in disk->id.
* disk/host.c (grub_host_open): Likewise.
* disk/loopback.c (grub_loopback_open): Likewise.
* disk/memdisk.c (grub_memdisk_open): Use a string pointer for
disk->id as in disk/host.c, not a multi-character constant.
Remove 2 TiB limit in ata.mod.
* disk/ata.c (grub_ata_device): Promote `size' to grub_uint64_t.
(grub_ata_dumpinfo): Print sector count with 0x%llx.
(grub_ata_identify): Interpret `&info16[100]' as a pointer to
grub_uint64_t instead of grub_uint32_t.
* disk/raid.c (grub_raid_scan_device): Add a pair of sanity checks for
situations in which we can deduce the RAID size and the superblock
doesn't match it.
* disk/lvm.c [GRUB_UTIL] (grub_lvm_memberlist): New function. Construct
and return a grub_diskmemberlist_t composed of LVM physical volumes.
[GRUB_UTIL] (grub_lvm_dev): Add `memberlist' member.
* disk/raid.c [GRUB_UTIL] (grub_raid_memberlist): New function. Construct
and return a grub_diskmemberlist_t composed of physical array members.
[GRUB_UTIL] (grub_raid_dev): Add `memberlist' member.
* include/grub/disk.h [GRUB_UTIL] (grub_disk_memberlist): New struct
prototype.
[GRUB_UTIL] (struct grub_disk_dev): Add `memberlist' function pointer.
[GRUB_UTIL] (struct grub_disk_memberlist): New struct declaration.
[GRUB_UTIL] (grub_disk_memberlist_t): New typedef.
* util/grub-probe.c (probe): Move partmap probing code from here ...
(probe_partmap): ... to here.
(probe): Use probe_partmap() once for the disk we're probing, and
additionally, when such disk contains a memberlist() struct member,
once for each disk that is contained in the structure returned by
memberlist().
* disk/raid.c (grub_raid_scan_device): Check for
`array->device[sb.this_disk.number]' rather than for
`array->device[sb.this_disk.number]->name', since the latter is not
garanteed to be accessible.
* include/grub/raid.h (struct grub_raid_array): Change type of `device'
to a grub_disk_t array.
* disk/raid.c (grub_raid_read): Replace `device[x].disk' accesses with
`device[x]'.
(grub_raid_scan_device): Replace `device[x].name' accesses with
`device[x]->name'. Simplify initialization of `array->device[x]'.
* disk/raid.c (grub_raid_open, grub_raid_scan_device): Add a few
grub_dprintf() calls.
* kern/disk.c (grub_disk_read): Include grub_errmsg in out of range
error message.
Patch from Jeroen Dekkers.
* disk/raid.c (grub_raid_scan_device): Reset `grub_errno' on disk
failure, since succesfuly reading all array members might not be
required.
* conf/i386-pc.rmk (pkglib_IMAGES): Add cdboot.img.
(cdboot_img_SOURCES): New variable.
(cdboot_img_ASFLAGS): New variable.
(cdboot_img_LDFLAGS): New variable.
* boot/i386/pc/cdboot.S: New file.
* disk/i386/pc/biosdisk.c (cd_start): New variable.
(cd_count): Likewise.
(grub_biosdisk_get_drive): Add support for cd device.
(grub_biosdisk_call_hook): Likewise.
(grub_biosdisk_iterate): Likewise.
(grub_biosdisk_open): Likewise.
(GRUB_BIOSDISK_CDROM_RETRY_COUNT): New macro.
(grub_biosdisk_rw): Support reading from cd device.
(GRUB_MOD_INIT): Iterate cd devices.
* include/grub/i386/pc/biosdisk.h (GRUB_BIOSDISK_FLAG_CDROM): New macro.
(GRUB_BIOSDISK_MACHINE_CDROM_START): Likewise.
(GRUB_BIOSDISK_MACHINE_CDROM_END): Likewise.
* kern/i386/pc/init.c (make_install_device): Check for cd device.
* disk/ieee1275/ofdisk.c (grub_ofdisk_iterate): When
`GRUB_IEEE1275_FLAG_OFDISK_SDCARD_ONLY' flag is set, skip any
device that doesn't look like an SD card.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): Add
`GRUB_IEEE1275_FLAG_OFDISK_SDCARD_ONLY' flag.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_set_flag): Detect
OLPC laptop, and set `GRUB_IEEE1275_FLAG_OFDISK_SDCARD_ONLY' when
found.
* conf/i386-pc.rmk (kernel_img_HEADERS): Add `machine/kernel.h'.
(pkglib_MODULES): Add `memdisk.mod'.
(memdisk_mod_SOURCES): New variable.
(memdisk_mod_CFLAGS): Likewise.
(memdisk_mod_LDFLAGS): Likewise.
* disk/memdisk.c: New file.
* include/grub/disk.h (grub_disk_dev_id): Add
`GRUB_DISK_DEVICE_MEMDISK_ID'.
* include/grub/i386/pc/kernel.h
(GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE): New macro.
(GRUB_KERNEL_MACHINE_PREFIX): Increment by 4.
(grub_kernel_image_size): New variable declaration.
(grub_total_module_size): Likewise.
(grub_memdisk_image_size): Likewise.
* include/grub/i386/pc/memory.h
(GRUB_MEMORY_MACHINE_DECOMPRESSION_ADDR): New macro.
* include/grub/kernel.h: Include `<grub/symbol.h>'.
(grub_arch_memdisk_addr): New variable declaration.
(grub_arch_memdisk_size): Likewise.
* kern/i386/pc/init.c (grub_arch_memdisk_addr): New function.
(grub_arch_memdisk_size): Likewise.
* kern/i386/pc/startup.S (grub_memdisk_image_size): New variable.
(codestart): Replace hardcoded `0x100000' with
`GRUB_MEMORY_MACHINE_DECOMPRESSION_ADDR' macro.
* util/i386/pc/grub-mkimage.c: Include `<grub/misc.h>'.
(generate_image): Add `memdisk_path' parameter. When `memdisk_path' is
not NULL, append the contents of the file it refers to, at the end of
the compressed kernel image. Initialize `grub_memdisk_image_size'
variable (at `GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE' offset).
(options): Add "memdisk"|'m' option.
(main): Parse --memdisk|-m option, and pass user-provided path as
parameter to generate_image().
* disk/host.c (grub_host_open): Remove attribute unused from
name parameter. Add check for "host". This fixes the problem
that grub-emu does not find partitions.
* kern/disk.c (grub_disk_firmware_fini)
(grub_disk_firmware_is_tainted): New variables.
* include/grub/disk.h (grub_disk_firmware_fini)
(grub_disk_firmware_is_tainted): Likewise.
* disk/i386/pc/biosdisk.c (GRUB_MOD_FINI(biosdisk)): Moved from here ...
(grub_disk_biosdisk_fini): ... to here.
(GRUB_MOD_FINI(biosdisk)): Implement using grub_disk_biosdisk_fini().
(GRUB_MOD_INIT(biosdisk)): Abort when `grub_disk_firmware_is_tainted'
is set. Register grub_disk_biosdisk_fini() in
`grub_disk_firmware_fini'.
* disk/ata.c: Remove `<grub/machine/biosdisk.h>'.
(GRUB_MOD_INIT(ata)): Remove grub_biosdisk_fini() call.
Use `grub_disk_firmware_is_tainted' and `grub_disk_firmware_fini'
to finish existing firmware disk interface.
* conf/i386-linuxbios.rmk (pkgdata_MODULES): Add `ata.mod'.
(ata_mod_SOURCES): New variable.
(ata_mod_CFLAGS): Likewise.
(ata_mod_LDFLAGS): Likewise.
* disk/ata.c (grub_ata_pio_read): Don't wait for the command to
become activate.
(grub_ata_pio_write): Likewise.
(grub_atapi_identify): Wait after issuing an ATA command.
(grub_atapi_packet): Likewise.
(grub_ata_identify): Likewise.
(grub_ata_readwrite): Likewise.
* disk/ata.c (grub_ata_pio_read): Detect and return the error code.
(grub_ata_pio_write): Likewise.
(grub_ata_readwrite): Use `grub_error', instead of
returning `grub_errno'.
2006-10-18 Jeroen Dekkers <jeroen@dekkers.cx>
* disk/lvm.c: Rename VGS to VG_LIST.
(grub_lvm_iterate): Change VGS->LV to VG-LV.
(grub_lvm_open): Likewise.
Thanks to Michael Guntsche for finding this bug.
* DISTLIST: Added commands/echo.c, disk/lvm.c, disk/raid.c,
include/grub/bitmap.h, include/grub/lvm.h, include/grub/raid.h,
include/grub/i386/pc/vbeutil.h, include/grub/util/lvm.h,
include/grub/util/raid.h, util/lvm.c, util/raid.c, video/bitmap.c,
video/readers/tga.c and video/i386/pc/vbeutil.c.
2006-10-14 Jeroen Dekkers <jeroen@dekkers.cx>
Added support for RAID and LVM.
* disk/lvm.c: New file.
* disk/raid.c: Likewise.
* include/grub/lvm.h: Likewise.
* include/grub/raid.h: Likewise.
* include/grub/util/lvm.h: Likewise.
* include/grub/util/raid.h: Likewise.
* util/lvm.c: Likewise.
* util/raid.c: Likewise.
* include/grub/disk.h (grub_disk_dev_id): Add
GRUB_DISK_DEVICE_RAID_ID and GRUB_DISK_DEVICE_LVM_ID.
(grub_disk_get_size): New prototype.
* kern/disk.c (grub_disk_open): Check whether grub_partition_probe()
returns a partition.
(grub_disk_get_size): New function.
* kern/i386/pc/init.c (make_install_device): Copy the prefix
verbatim if grub_install_dos_part is -2.
* util/i386/pc/getroot.c (grub_guess_root_device): Support RAID
and LVM devices.
* util/i386/pc/grub-setup.c (setup): New argument
MUST_EMBED. Force embedding of GRUB when the argument is
true. Close FILE before returning.
(main): Add support for RAID and LVM.
* conf/common.rmk: Add RAID and LVM modules.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add util/raid.c and
util/lvm.c.
(grub_emu_SOURCES): Add disk/raid.c and disk/lvm.c.
* kern/misc.c (grub_strstr): New function.
* include/grub/misc.h (grub_strstr): New prototype.
* disk/i386/pc/biosdisk.c (struct grub_biosdisk_drp): Moved to ...
(struct grub_biosdisk_dap): Likewise.
* include/grub/i386/pc/biosdisk.h: ... to here. Also corrected
linkage settings for all functions.
Clean up the code to support 64-bit addressing in disks and
files. This change is not enough for filesystems yet.
* util/i386/pc/grub-setup.c (struct boot_blocklist): Change the
type of "start" to grub_uint64_t.
(setup): Change the types of KERNEL_SECTOR and FIRST_SECTOR to
grub_disk_addr_t * and grub_disk_addr_t. Fix the format string in
save_first_sector and save_blocklists. Use grub_le_to_cpu64 to
convert addresses.
* util/i386/pc/biosdisk.c (open_device): Change the type of SECTOR
to grub_disk_addr_t.
* partmap/gpt.c (gpt_partition_map_iterate): Fix the format
string.
* partmap/pc.c (pc_partition_map_iterate): Likewise.
* partmap/amiga.c (amiga_partition_map_iterate): Cast RDSK.MAGIC
to char *.
* normal/script.c (grub_script_parse): Remove unused MEMFREE.
* normal/parser.y (YYLTYPE_IS_TRIVIAL): New macro.
* normal/lexer.c (grub_script_yyerror): Specify unused to LEX.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf64): Cast -1
to grub_off_t, to detect an error from grub_file_seek.
(grub_multiboot_load_elf32): Likewise.
* kern/misc.c (grub_strtoul): Use grub_strtoull. Return the
maximum unsigned long value when an overflow is detected.
(grub_strtoull): New function.
(grub_divmod64): Likewise.
(grub_lltoa): use grub_divmod64.
* kern/fs.c (struct grub_fs_block): Change the type of "offset" to
grub_disk_addr_t.
(grub_fs_blocklist_open): Increase P if P is not NULL to advance
the pointer to next character. Use grub_strtoull instead of
grub_strtoul.
(grub_fs_blocklist_read): Change the types of SECTOR, OFFSET and
SIZE to grub_disk_addr_t, grub_off_t and grub_size_t,
respectively.
* kern/file.c (grub_file_read): Prevent an oveflow of LEN, as the
return value is signed.
(grub_file_seek): Change the type of OLD to grub_off_t. Do not
test if OFFSET is less than zero, as OFFSET is unsigned now.
* kern/disk.c (struct grub_disk_cache): Change the type of
"sector" to grub_disk_addr_t.
(grub_disk_cache_get_index): Change the type of SECTOR to
grub_disk_addr_t. Calculate the hash with SECTOR casted to
unsigned after shifting.
(grub_disk_cache_invalidate): Change the type of SECTOR to
grub_disk_addr_t.
(grub_disk_cache_unlock): Likewise.
(grub_disk_cache_store): Likewise.
(grub_disk_check_range): Change the types of SECTOR, OFFSET, SIZE,
START and LEN to grub_disk_addr_t *, grub_off_t *, grub_size_t,
grub_disk_addr_t and grub_uint64_t, respectively.
(grub_disk_read): Use an unsigned variable REAL_OFFSET for the
body, as the value of OFFSET is tweaked by
grub_disk_check_range. Change the types of START_SECTOR, LEN and
POS to grub_disk_addr_t, grub_size_t and grub_size_t,
respectively.
(grub_disk_write): Use an unsigned variable REAL_OFFSET for the
body, as the value of OFFSET is tweaked by
grub_disk_check_range. Change the types of LEN and N to
grub_size_t.
* io/gzio.c (struct grub_gzio): Change the types of "data_offset"
and "saved_offset" to grub_off_t.
(test_header): Cast BUF to char *.
(get_byte): Cast GZIO->DATA_OFFSET to grub_off_t. Cast GZIO->INBUF
to char *.
(grub_gzio_read): Change the types of OFFSET and SIZE to
grub_off_t and grub_size_t, respectively.
* include/grub/i386/pc/boot.h (GRUB_BOOT_MACHINE_FORCE_LBA):
Removed.
(GRUB_BOOT_MACHINE_BOOT_DRIVE): Changed to 0x4c.
(GRUB_BOOT_MACHINE_KERNEL_ADDRESS): Changed to 0x40.
(GRUB_BOOT_MACHINE_KERNEL_SEGMENT): Changed to 0x42.
(GRUB_BOOT_MACHINE_DRIVE_CHECK): Changed to 0x4e.
(GRUB_BOOT_MACHINE_LIST_SIZE): Increased to 12.
* include/grub/types.h (grub_off_t): Unconditionally set to
grub_uint64_t.
(grub_disk_addr_t): Changed to grub_uint64_t.
* include/grub/partition.h (struct grub_partition): Change the
types of "start", "len" and "offset" to grub_disk_addr_t,
grub_uint64_t and grub_disk_addr_t, respectively.
(grub_partition_get_start): Return grub_disk_addr_t.
(grub_partition_get_len): Return grub_uint64_t.
* include/grub/misc.h (grub_strtoull): New prototype.
(grub_divmod64): Likewise.
* include/grub/fshelp.h (grub_fshelp_read_file): Change the types
of SECTOR, LEN and FILESIZE to grub_disk_addr_t, grub_size_t and
grub_off_t, respectively.
All callers and references changed.
* include/grub/fs.h (struct grub_fs): Change the type of LEN to
grub_size_t in "read".
All callers and references changed.
* include/grub/file.h (struct grub_file): Change the types of
"offset" and "size" to grub_off_t and grub_off_t,
respectively. Change the type of SECTOR to grub_disk_addr_t in
"read_hook".
(grub_file_read): Change the type of LEN to grub_size_t.
(grub_file_seek): Return grub_off_t. Change the type of OFFSET to
grub_off_t.
(grub_file_size): Return grub_off_t.
(grub_file_tell): Likewise.
All callers and references changed.
* include/grub/disk.h (struct grub_disk_dev): Change the types of
SECTOR and SIZE to grub_disk_addr_t and grub_size_t in "read" and
"write".
(struct grub_disk): Change the type of "total_sectors" to
grub_uint64_t. Change the type of SECTOR to grub_disk_addr_t in
"read_hook".
(grub_disk_read): Change the types of SECTOR, OFFSET and SIZE to
grub_disk_addr_t, grub_off_t and grub_size_t, respectively.
(grub_disk_write): Likewise.
All callers and references changed.
* fs/iso9660.c (grub_iso9660_susp_iterate): Cast parameters to
char * for grub_strncmp to silence gcc.
(grub_iso9660_mount): Likewise.
(grub_iso9660_mount): Likewise.
(grub_iso9660_read_symlink): Likewise. Also, remove the nonsense
return statement.
(grub_iso9660_iterate_dir): Likewise.
(grub_iso9660_label): Cast DATA->VOLDESC.VOLNAME to char *.
* fs/hfs.c (grub_hfs_read_file): Change the types of SECTOR and
LEN to grub_disk_addr_t and grub_size_t, respectively.
* fs/hfsplus.c (grub_hfsplus_read_file): Likewise.
* fs/jfs.c (grub_jfs_read_file): Likewise.
* fs/minix.c (grub_jfs_read_file): Likewise.
* fs/sfs.c (grub_jfs_read_file): Likewise.
* fs/ufs.c (grub_jfs_read_file): Likewise.
* fs/xfs.c (grub_jfs_read_file): Likewise.
* fs/fat.c (grub_fat_read_data): Change the types of SECTOR, LEN
and SIZE to grub_disk_addr_t, grub_size_t and grub_size_t,
respectively.
* fs/ext2.c (grub_ext2_read_block): When an error happens, set
BLKNR to -1 instead of returning GRUB_ERRNO.
(grub_ext2_read_file): Change the types of SECTOR and
LEN to grub_disk_addr_t and grub_size_t, respectively.
* fs/affs.c (grub_affs_read_file): Change the types of SECTOR and
LEN to grub_disk_addr_t and grub_size_t, respectively.
* font/manager.c (grub_font_get_glyph): Cast BITMAP to char * for
grub_file_read.
* disk/ieee1275/ofdisk.c (grub_ofdisk_read): Fix the format
string. Do not cast SECTOR explicitly.
* disk/i386/pc/biosdisk.c (grub_biosdisk_open): Change the type of
TOTAL_SECTORS to grub_uint64_t. Do not mask DRP->TOTAL_SECTORS.
(grub_biosdisk_rw): Change the types of SECTOR and SIZE to
grub_disk_addr_t and grub_size_t, respectively. If the sector is
over 2TB and LBA mode is not supported, raise an error.
(get_safe_sectors): New function.
(grub_biosdisk_read): Use get_safe_sectors.
(grub_biosdisk_write): Likewise.
* disk/efi/efidisk.c (grub_efidisk_read): Fix the format string.
(grub_efidisk_write): Likewise.
* disk/loopback.c (delete_loopback): Cosmetic changes.
(grub_cmd_loopback): Likewise. Also, test NEWDEV->FILENAME
correctly.
(grub_loopback_open): Likewise.
(grub_loopback_read): Likewise. Also, change the type of POS to
grub_off_t, and fix the usage of grub_memset.
* commands/i386/pc/play.c: Include grub/machine/time.h.
* commands/ls.c (grub_ls_list_files): Use "llu" instead of "d" to
print FILE->SIZE.
* commands/configfile.c: Include grub/env.h.
* commands/cmp.c (grub_cmd_cmp): Do not use ERR, but use
GRUB_ERRNO directly instead. Change the type of POS to
grub_off_t. Follow the coding standard.
* commands/blocklist.c: Include grub/partition.h.
(grub_cmd_blocklist): Return an error if the underlying device is
not a disk. Take the starting sector of a partition into account,
if a partition is used.
* boot/i386/pc/diskboot.S (bootloop): Adapted to the new offset of
a length field.
(lba_mode): Support 64-bit addresses.
(chs_mode): Likewise.
(copy_buffer): Adapted to the new offsets of a length field and a
segment field.
(blocklist_default_start): Allocate 64-bit space.
* boot/i386/pc/boot.S (force_lba): Removed.
(boot_drive): Moved to under KERNEL_SECTOR.
(kernel_sector): Moved to under KENREL_SEGMENT. Allocate 64-bit
space.
(real_start): Set %si earlier. Remove code for FORCE_LBA, since it
is useless.
(lba_mode): Refactored to support a 64-bit address. More size
optimization.
(setup_sectors): Likewise.
Extend the loader so that GRUB can accept a loader which comes
back to GRUB when a loaded image exits. Also, this change adds
support for a chainloader on EFI.
* term/efi/console.c: Include grub/misc.h.
(grub_console_checkkey): Display a scan code on the top for
debugging. This will be removed once the EFI port gets stable.
Correct the scan code mapping.
* kern/efi/mm.c (sort_memory_map): Sort in a descending order to
allocate memory from larger regions, in order to reduce the number
of allocated regions. Otherwise, the MacOSX loader panics.
(filter_memory_map): Avoid less than 1MB for compatibility with
other loaders.
(add_memory_regions): Allocate from the tail of a region, if
possible, to avoid allocating a region near to 1MB, for the MacOSX
loader.
* kern/efi/init.c (grub_efi_set_prefix): Specify
GRUB_EFI_IMAGE_HANDLE to grub_efi_get_loaded_image.
* kern/efi/efi.c (grub_efi_get_loaded_image): Accept a new
argument IMAGE_HANDLE and specify it to get a loaded image.
(grub_arch_modules_addr): Specify GRUB_EFI_IMAGE_HANDLE to
grub_efi_get_loaded_image.
(grub_efi_get_filename): Divide the legnth by the size of
grub_efi_char16_t.
(grub_efi_get_device_path): New function.
(grub_efi_print_device_path): Print End Device Path nodes. Divide
the length by the size of grub_efi_char16_t for a file path device
path node.
* kern/loader.c (grub_loader_noreturn): New variable.
(grub_loader_set): Accept a new argument NORETURN. Set
GRUB_LOADER_NORETURN to NORETURN.
All callers changed.
(grub_loader_boot): If GRUB_LOADER_NORETURN is false, do not call
grub_machine_fini.
* include/grub/efi/efi.h (grub_efi_get_device_path): New
prototype.
(grub_efi_get_loaded_image): Take an argument to specify an image
handle.
* include/grub/loader.h (grub_loader_set): Added one more argument
NORETURN.
* disk/efi/efidisk.c (make_devices): Use grub_efi_get_device_path
instead of grub_efi_open_protocol.
(grub_efidisk_get_device_name): Likewise.
(grub_efidisk_close): Print a newline.
(grub_efidisk_get_device_handle): Fixed to use
GRUB_EFI_DEVICE_PATH_SUBTYPE instead of
GRUB_EFI_DEVICE_PATH_TYPE.
* disk/efi/efidisk.c (device_path_guid): Moved to ...
* kern/efi/efi.c (device_path_guid): ... here.
* conf/i386-efi.rmk (pkgdata_MODULES): Added _chain.mod and
chain.mod.
(kernel_mod_HEADERS): Added efi/disk.h.
(_chain_mod_SOURCES): New variable.
(_chain_mod_CFLAGS): Likewise.
(_chain_mod_LDFLAGS): Likewise.
(chain_mod_SOURCES): Likewise.
(chain_mod_CFLAGS): Likewise.
(chain_mod_LDFLAGS): Likewise.
* DISTLIST: Added include/grub/efi/chainloader.h,
loader/efi/chainloader.c and loader/efi/chainloader_normal.c.
* include/grub/efi/chainloader.h: New file.
* loader/efi/chainloader.c: Likewise.
* loader/efi/chainloader_normal.c: Likewise.
A new machine-specific function "grub_machine_set_prefix" is
defined. This is called after loading modules, so that a prefix
initialization can use modules. Also, this change adds an
intensive debugging feature for the memory manager via the
configure option "--enable-mm-debug".
* partmap/gpt.c (gpt_partition_map_iterate): Add one more into
PART.LEN.
* kern/sparc64/ieee1275/init.c (abort): Removed.
(grub_stop): Likewise.
(grub_exit): New function.
(grub_set_prefix): Renamed to ...
(grub_machine_set_prefix): ... this.
(grub_machine_init): Do not call grub_set_prefix.
* kern/powerpc/ieee1275/init.c (grub_set_prefix): Renamed to ...
(grub_machine_set_prefix): ... this.
(grub_machine_init): Do not call grub_set_prefix.
* kern/i386/pc/init.c (grub_machine_set_prefix): New function.
(grub_machine_init): Do not set the prefix here.
* kern/i386/efi/init.c (grub_machine_set_prefix): New function.
* kern/efi/init.c: Include grub/mm.h.
(grub_efi_set_prefix): New function.
* kern/efi/efi.c (grub_exit): Call grub_efi_fini.
(grub_efi_get_filename): New function.
(grub_print_device_path): Renamed to ...
(grub_efi_print_device_path): ... this.
* kern/mm.c [MM_DEBUG] (grub_malloc): Undefined.
[MM_DEBUG] (grub_realloc): Likewise.
[MM_DEBUG] (grub_free): Likewise.
[MM_DEBUG] (grub_memalign): Likewise.
[MM_DEBUG] (grub_mm_debug): New variable.
[MM_DEBUG] (grub_debug_malloc): New function.
[MM_DEBUG] (grub_debug_free): New function.
[MM_DEBUG] (grub_debug_realloc): New function.
[MM_DEBUG] (grub_debug_memalign): New function.
* kern/misc.c (grub_abort): Print a newline to distinguish
the message.
* kern/main.c (grub_main): Call grub_machine_set_prefix and
grub_set_root_dev after loading modules. This is necessary when
setting a prefix depends on modules.
* include/grub/efi/efi.h (grub_print_device_path): Renamed to ...
(grub_efi_print_device_path): ... this.
(grub_efi_get_filename): New prototype.
(grub_efi_set_prefix): Likewise.
* include/grub/efi/disk.h: Include grub/efi/api.h, grub/symbol.h
and grub/disk.h.
(grub_efidisk_get_device_handle): New prototype.
(grub_efidisk_get_device_name): Likewise.
* include/grub/mm.h: Include config.h.
(MM_DEBUG): Removed.
[MM_DEBUG && !GRUB_UTIL] (grub_mm_debug): New prototype.
[MM_DEBUG && !GRUB_UTIL] (grub_malloc): New macro.
[MM_DEBUG && !GRUB_UTIL] (grub_realloc): Likewise.
[MM_DEBUG && !GRUB_UTIL] (grub_memalign): Likewise.
[MM_DEBUG && !GRUB_UTIL] (grub_free): Likewise.
[MM_DEBUG && !GRUB_UTIL] (grub_debug_malloc): New prototype.
[MM_DEBUG && !GRUB_UTIL] (grub_debug_realloc): New prototype.
[MM_DEBUG && !GRUB_UTIL] (grub_debug_memalign): New prototype.
[MM_DEBUG && !GRUB_UTIL] (grub_debug_free): New prototype.
* include/grub/kernel.h (grub_machine_set_prefix): New prototype.
* disk/efi/efidisk.c: Include grub/partition.h.
(iterate_child_devices): New function.
(add_device): First, compare only last device path nodes, so that
devices are sorted by the types.
(grub_efidisk_get_device_handle): New function.
(grub_efidisk_get_device_name): Likewise.
* configure.ac (--enable-mm-debug): New option to enable the
memory manager debugging feature. This makes the binary much
bigger, so is disabled by default.
Use grub_abort instead of grub_stop, and grub_exit must be
define in each architecture now. Also, this change adds support
for EFI disks.
* util/i386/pc/grub-probefs.c: Include grub/term.h.
(grub_getkey): New function.
(grub_term_get_current): Likewise.
* util/i386/pc/grub-setup.c: Include grub/term.h.
(grub_getkey): New function.
(grub_term_get_current): Likewise.
* util/misc.c (grub_stop): Renamed to ...
(grub_exit): ... this.
* kern/powerpc/ieee1275/init.c (abort): Renamed to ...
(grub_exit): ... this.
(grub_machine_init): Use grub_abort instead of abort.
(grub_stop): Removed.
* kern/powerpc/ieee1275/cmain.c (cmain): Use grub_abort instead of
abort.
* kern/i386/pc/startup.S (grub_exit): New function.
(cold_reboot): New label.
* kern/efi/init.c: Include grub/efi/disk.h and grub/env.h.
(grub_efi_init): Call grub_efidisk_init.
(grub_efi_fini): Call grub_efidisk_fini.
* kern/efi/efi.c: Include grub/mm.h.
(grub_efi_console_control_guid): Renamed to ...
(console_control_guid): ... this.
(grub_efi_loaded_image_guid): Renamed to ...
(loaded_image_guid): ... this.
(grub_efi_locate_handle): New function.
(grub_efi_open_protocol): Likewise.
(grub_efi_set_text_mode): Use CONSOLE_CONTROL_GUID instead of
GRUB_EFI_CONSOLE_CONTROL_GUID.
(grub_efi_exit): Removed.
(grub_stop): Likewise.
(grub_efi_get_loaded_image): Use grub_efi_open_protocol.
(grub_exit): New function.
(grub_print_device_path): Likewise.
* kern/rescue.c (grub_rescue_cmd_exit): New function.
(grub_enter_rescue_mode): Register "exit".
* kern/misc.c (grub_real_dprintf): A cosmetic change.
(grub_abort): New function.
* kern/err.c (grub_fatal): Use grub_abort instead of grub_stop.
* include/grub/sparc64/ieee1275/kernel.h (abort): Removed.
* include/grub/powerpc/ieee1275/kernel.h (abort): Removed.
* include/grub/efi/efi.h (grub_efi_exit): Removed.
(grub_print_device_path): New prototype.
(grub_efi_locate_handle): Likewise.
(grub_efi_open_protocol): Likewise.
* include/grub/efi/disk.h (grub_efidisk_fini): New file.
* disk/efi/efidisk.c: Likewise.
* DISTLIST: Added disk/efi/efidisk.c and include/grub/efi/disk.h.
* include/grub/efi/console_control.h
(GRUB_EFI_CONSOLE_CONTROL_GUID): Use an array for the last 8 bytes.
* include/grub/efi/api.h (GRUB_EFI_LOADED_IMAGE_GUID): Specify the
last 8 bytes as an array.
(GRUB_EFI_DISK_IO_GUID): New macro.
(GRUB_EFI_BLOCK_IO_GUID): Likewise.
(GRUB_EFI_DEVICE_PATH_GUID): Likewise.
(grub_efi_ipv6_address_t): Change the type to grub_uint16_t from
grub_uint8_t.
(struct grub_efi_guid): Use an array to specify the last 8 bytes.
(struct grub_efi_device_path): Rename the member "sub_type" to
"subtype".
(GRUB_EFI_DEVICE_PATH_TYPE): New macro.
(GRUB_EFI_DEVICE_PATH_SUBTYPE): Likewise.
(GRUB_EFI_DEVICE_PATH_LENGTH): Likewise.
(GRUB_EFI_END_DEVICE_PATH_TYPE): Likewise.
(GRUB_EFI_END_ENTIRE_DEVICE_PATH_SUBTYPE): Likewise.
(GRUB_EFI_END_THIS_DEVICE_PATH_SUBTYPE): Likewise.
(GRUB_EFI_END_ENTIRE_DEVICE_PATH): Likewise.
(GRUB_EFI_NEXT_DEVICE_PATH): Likewise.
(GRUB_EFI_HARDWARE_DEVICE_PATH_TYPE): Likewise.
(GRUB_EFI_PCI_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_pci_device_path): New structure.
(grub_efi_pci_device_path_t): New type.
(GRUB_EFI_PCCARD_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_pccard_device_path): New structure.
(grub_efi_pccard_device_path_t): New type.
(GRUB_EFI_MEMORY_MAPPED_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_memory_mapped_device_path): New structure.
(grub_efi_memory_mapped_device_path_t): New type.
(GRUB_EFI_VENDOR_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_vendor_device_path): New structure.
(grub_efi_vendor_device_path_t): New type.
(GRUB_EFI_CONTROLLER_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_controller_device_path): New structure.
(grub_efi_controller_device_path_t): New type.
(GRUB_EFI_ACPI_DEVICE_PATH_TYPE): New macro.
(GRUB_EFI_ACPI_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_acpi_device_path): New structure.
(grub_efi_acpi_device_path_t): New type.
(GRUB_EFI_EXPANDED_ACPI_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_expanded_acpi_device_path): New structure.
(grub_efi_expanded_acpi_device_path_t): New type.
(GRUB_EFI_EXPANDED_ACPI_HIDSTR): New macro.
(GRUB_EFI_EXPANDED_ACPI_UIDSTR): Likewise.
(GRUB_EFI_EXPANDED_ACPI_CIDSTR): Likewise.
(GRUB_EFI_MESSAGING_DEVICE_PATH_TYPE): Likewise.
(GRUB_EFI_ATAPI_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_atapi_device_path): New structure.
(grub_efi_atapi_device_path_t): New type.
(GRUB_EFI_FIBRE_CHANNEL_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_fibre_channel_device_path): New structure.
(grub_efi_fibre_channel_device_path_t): New type.
(GRUB_EFI_1394_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_1394_device_path): New structure.
(grub_efi_1394_device_path_t): New type.
(GRUB_EFI_USB_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_usb_device_path): New structure.
(grub_efi_usb_device_path_t): New type.
(GRUB_EFI_USB_CLASS_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_usb_class_device_path): New structure.
(grub_efi_usb_class_device_path_t): New type.
(GRUB_EFI_I2O_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_i2o_device_path): New structure.
(grub_efi_i2o_device_path_t): New type.
(GRUB_EFI_MAC_ADDRESS_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_mac_address_device_path): New structure.
(grub_efi_mac_address_device_path_t): New type.
(GRUB_EFI_IPV4_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_ipv4_device_path): New structure.
(grub_efi_ipv4_device_path_t): New type.
(GRUB_EFI_IPV6_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_ipv6_device_path): New structure.
(grub_efi_ipv6_device_path_t): New type.
(GRUB_EFI_INFINIBAND_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_infiniband_device_path): New structure.
(grub_efi_infiniband_device_path_t): New type.
(GRUB_EFI_UART_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_uart_device_path): New structure.
(grub_efi_uart_device_path_t): New type.
(GRUB_EFI_VENDOR_MESSAGING_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_vendor_messaging_device_path): New structure.
(grub_efi_vendor_messaging_device_path_t): New type.
(GRUB_EFI_MEDIA_DEVICE_PATH_TYPE): New macro.
(GRUB_EFI_HARD_DRIVE_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_hard_drive_device_path): New structure.
(grub_efi_hard_drive_device_path_t): New type.
(GRUB_EFI_CDROM_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_cdrom_device_path): New structure.
(grub_efi_cdrom_device_path_t): New type.
(GRUB_EFI_VENDOR_MEDIA_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_vendor_media_device_path): New structure.
(grub_efi_vendor_media_device_path_t): New type.
(GRUB_EFI_FILE_PATH_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_file_path_device_path): New structure.
(grub_efi_file_path_device_path_t): New type.
(GRUB_EFI_PROTOCOL_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_protocol_device_path): New structure.
(grub_efi_protocol_device_path_t): New type.
(GRUB_EFI_BIOS_DEVICE_PATH_TYPE): New macro.
(GRUB_EFI_BIOS_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_bios_device_path): New structure.
(grub_efi_bios_device_path_t): New type.
(struct grub_efi_disk_io): New structure.
(grub_efi_disk_io_t): New type.
(struct grub_efi_block_io_media): New structure.
(grub_efi_block_io_media_t): New type.
(struct grub_efi_block_io): New structure.
(grub_efi_block_io_t): New type.
* include/grub/misc.h (grub_stop): Removed.
(grub_exit): New prototype.
(grub_abort): Likewise.
* include/grub/disk.h (enum grub_disk_dev_id): Added
GRUB_DISK_DEVICE_EFIDISK_ID.
* conf/i386-efi.rmk (kernel_mod_SOURCES): Added
disk/efi/efidisk.c.
(kernel_syms.lst): Remove the target if an error occurs.
* configure.ac: Add support for sparc64 host with ieee1275
firmware.
* configure: Generated from configure.ac.
* disk/ieee1275/ofdisk.c (grub_ofdisk_open): Use grub_ssize_t
instead of int.
(grub_ofdisk_read): Likewise.
(grub_ofdisk_open): Use %p to print pointer values, and cast the
pointers as (void *) to remove a warning.
(grub_ofdisk_close): Likewise.
(grub_ofdisk_read): Likewise.
* kern/ieee1275/ieee1275.c (grub_ieee1275_exit): This never
returns, so make it return void to remove a warning.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_exit):
Corresponding prototype change.
* kern/mm.c (grub_mm_init_region): Use %p to print pointer
values, and cast the pointers as (void *) to remove a warning.
(grub_mm_dump): Likewise.
* conf/sparc64-ieee1275.mk: New file.
* conf/sparc64-ieee1275.rmk: Likewise.
* include/grub/sparc64/setjmp.h: Likewise.
* include/grub/sparc64/types.h: Likewise.
* include/grub/sparc64/ieee1275/console.h: Likewise.
* include/grub/sparc64/ieee1275/ieee1275.h: Likewise.
* include/grub/sparc64/ieee1275/kernel.h: Likewise.
* include/grub/sparc64/ieee1275/time.h: Likewise.
* kern/sparc64/cache.c: Likewise.
* kern/sparc64/dl.c: Likewise.
* kern/sparc64/ieee1275/init.c: Likewise.
* kern/sparc64/ieee1275/openfw.c: Likewise.
