* normal/menu.c (run_menu): Move timeout message from here ...
(print_timeout): ... to here.
(run_menu): Use print_timeout() once during initial draw to print
the whole message, and again in every clock tick to update only
the number of seconds.
* kern/powerpc/ieee1275/openfw.c (grub_available_iterate): Obtain
actual size of `available' from grub_ieee1275_get_property(), and
restrict parsing to that bound.
* include/grub/util/getroot.h (grub_dev_abstraction_types): New enum.
(grub_util_get_dev_abstraction): New function prototype.
* util/getroot.c: Include `<grub/util/getroot.h>'
(grub_util_get_grub_dev): Move detection of abstraction type to ...
(grub_util_get_dev_abstraction): ... here (new function).
* util/grub-probe.c: Convert PRINT_* to an enum. Add
`PRINT_ABSTRACTION'.
(probe): Probe for abstraction type when requested.
(main): Understand `--target=abstraction'.
* util/i386/efi/grub-install.in: Add abstraction module to core
image when it is found to be necessary.
* util/i386/pc/grub-install.in: Likewise.
* util/powerpc/ieee1275/grub-install.in: Likewise.
* util/update-grub_lib.in (font_path): Return system path without
converting to GRUB path.
* util/update-grub.in: Convert system path returned by font_path()
to a GRUB path. Use `grub-probe -t abstraction' to determine what
abstraction module is needed for loading fonts (if any). Export
that as `GRUB_PRELOAD_MODULES'.
* util/grub.d/00_header.in: Process `GRUB_PRELOAD_MODULES' (print
insmod commands).
* util/update-grub_lib.in (grub_file_is_not_garbage): New function.
Determines if a file is garbage left by packaging systems, etc.
* util/update-grub.in: Use grub_file_is_not_garbage() as a condition
for processing /etc/grub.d scripts.
* util/grub.d/10_hurd.in: Fix `GRUB_DISTRIBUTOR' comparison.
* util/grub.d/10_linux.in: Likewise. Use grub_file_is_not_garbage()
as a condition for processing Linux images.
* kern/device.c (grub_device_iterate): Do not abort device iteration
when one of the devices cannot be opened.
* kern/disk.c (grub_disk_open): Do not account previous failures of
unrelated functions when grub_errno is checked for.
* loader/i386/pc/linux.c (grub_rescue_cmd_linux): For
`! grub_linux_is_bzimage', change order of address comparison to make
it more intuitive, and improve "too big zImage" error message.
* boot/i386/pc/boot.S (boot_drive_check): Add a comment indicating
which instruction is modified by grub-setup during installation
(since it wasn't obvious by only looking at this file).
* fs/reiserfs.c (grub_reiserfs_get_key_v2_type): Handle endianness
correctly.
(grub_reiserfs_get_key_offset): Likewise.
(grub_reiserfs_set_key_offset): Likewise.
(grub_reiserfs_set_key_type): Likewise.
(grub_reiserfs_iterate_dir): Return 1 if found, otheriwise 0.
(GRUB_REISERFS_KEYV2_BITFIELD): Undefined. Probably it would be
better to remove the bitfield version completely.
* fs/reiserfs.c (grub_reiserfs_iterate_dir): ENTRY_ITEM must be
allocated from the heap, due to the fshelp implementation.
(grub_reiserfs_dir): Free NODE, due to the same reason.
* include/grub/normal.h (grub_env_write_color_normal): New prototype.
(grub_env_write_color_highlight): Likewise.
(grub_wait_after_message): Likewise.
* normal/color.c: New file.
* conf/i386-pc.rmk (grub_emu_SOURCES): Add `normal/color.c'.
(normal_mod_DEPENDENCIES): Likewise.
* conf/i386-efi.rmk (grub_emu_SOURCES): Add `normal/color.c'.
(normal_mod_DEPENDENCIES): Likewise.
* conf/i386-linuxbios.rmk (grub_emu_SOURCES): Add `normal/color.c'.
(normal_mod_DEPENDENCIES): Likewise.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Add `normal/color.c'.
(normal_mod_DEPENDENCIES): Likewise.
* normal/menu_entry.c (run): Rely on grub_wait_after_message()
for waiting after a message is printed.
* normal/main.c (read_config_file): Likewise.
(grub_normal_init): Register grub_env_write_color_normal() and
grub_env_write_color_highlight() hooks. Mark `color_normal' and
`color_highlight' variables as global.
* normal/menu.c (grub_wait_after_message): New function.
(grub_color_menu_normal): New variable. Replaces ...
(GRUB_COLOR_MENU_NORMAL): ... this macro.
(grub_color_menu_highlight): New variable. Replaces ...
(GRUB_COLOR_MENU_HIGHLIGHT): ... this macro.
(draw_border): Set color state to `GRUB_TERM_COLOR_NORMAL' instead of
`GRUB_TERM_COLOR_STANDARD'.
(print_message): Use `grub_setcolorstate' to reload colors. Rename
`normal_code' and `highlight_code' to `old_color_normal' and
`old_color_highlight', respectively.
(grub_menu_init_page): Update colors when drawing the menu, based on
`menu_color_normal' and `menu_color_highlight' variables.
(grub_menu_run): Rely on grub_wait_after_message() for waiting after
a message is printed.
* kern/i386/linuxbios/init.c: Put "void" to all function
declarations with no arguments.
* kern/powerpc/ieee1275/init.c: Likewise.
* term/i386/pc/at_keyboard.c: Likewise.
* term/i386/pc/vga_text.c: Likewise.
* util/grub-mkdevicemap.c: Likewise.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): Improve error
message when loaded image is out of bounds.
(grub_multiboot_load_elf64): Likewise.
* include/grub/video.h: Added grub_video_unmap_color and
grub_video_get_active_render_target.
(grub_video_adapter): Added unmap_color and get_active_render_target.
* video/video.c: Added grub_video_unmap_color and
grub_video_get_active_render_target.
(grub_video_get_info): Changed method to accept NULL pointer as an
argument to allow detection of active video adapter.
* video/i386/pc/vbe.c: Renamed grub_video_vbe_unmap_color as
grub_video_vbe_unmap_color_int.
Added grub_video_vbe_unmap_color and
grub_video_vbe_get_active_render_target.
(grub_video_vbe_adapter): Added unmap_color and
get_active_render_target.
* video/i386/pc/vbeblit.c: Replaced grub_video_vbe_unmap_color usage
with grub_video_vbe_unmap_color_int.
* term/gfxterm.c (DEFAULT_STANDARD_COLOR): Added.
(DEFAULT_NORMAL_COLOR): Likewise.
(DEFAULT_HIGHLIGHT_COLOR) Likewise.
(DEFAULT_FG_COLOR): Removed.
(DEFAULT_BG_COLOR): Likewise.
(DEFAULT_CURSOR_COLOR): Changed value.
(grub_virtual_screen): Added standard_color_setting,
normal_color_setting, highlight_color_setting and term_color.
(grub_virtual_screen): Removed fg_color_setting and bg_color_setting.
(bitmap_width): Added.
(bitmap_height): Likewise.
(bitmap): Likewise.
(set_term_color): Likewise.
(grub_virtual_screen_setup): Changed to use new terminal coloring
settings.
(grub_gfxterm_init): Added init for bitmap.
(grub_gfxterm_fini): Added destroy for bitmap.
(redraw_screen_rect): Updated to use background bitmap and new
terminal coloring.
(scroll_up): Added optimization for case when there is no bitmap.
(grub_gfxterm_cls): Fixed to use correct background color.
(grub_virtual_screen_setcolorstate): Changed to use new terminal
coloring.
(grub_virtual_screen_setcolor): Likewise.
(grub_virtual_screen_getcolor): Added.
(grub_gfxterm_background_image_cmd): Likewise.
(grub_video_term): Added setcolor and getcolor.
(MOD_INIT): Added registration of background_image command.
(MOD_TERM): Added unregistration for background_image command.
* include/grub/term.h (struct grub_term): Add `getcolor' function.
(grub_getcolor): New function.
* kern/term.c (grub_getcolor): New function.
* normal/menu.c (GRUB_COLOR_MENU_NORMAL): New macro.
(GRUB_COLOR_MENU_HIGHLIGHT): New macro.
(print_entry): Set normal and highlight colors to
`GRUB_COLOR_MENU_NORMAL' and `GRUB_COLOR_MENU_HIGHLIGHT',
respectively, before printing and restore them to old
values afterwards.
(grub_menu_init_page): Likewise. Fill an additional colored space
that would otherwise be left blank.
* term/efi/console.c (grub_console_getcolor): New function.
(struct grub_console_term.getcolor): New variable.
* term/i386/pc/console.c (grub_console_getcolor): New function.
(struct grub_console_term.getcolor): New variable.
* term/ieee1275/ofconsole.c (grub_ofconsole_getcolor): New function.
(struct grub_console_term.getcolor): New variable.
* term/i386/pc/serial.c (grub_serial_setcolor): Remove function.
(struct grub_console_term.setcolor): Remove variable.
* term/i386/pc/vesafb.c (grub_virtual_screen_setcolor): Remove function.
(struct grub_console_term.setcolor): Remove variable.
* term/i386/pc/vga.c (grub_vga_setcolor): Remove function.
(struct grub_console_term.setcolor): Remove variable.
* term/gfxterm.c (grub_virtual_screen_setcolor): Remove function.
(struct grub_console_term.setcolor): Remove variable.
* configure.ac: Search for possible unifont.hex locations, and
define UNIFONT_HEX if found.
* Makefile.in (UNIFONT_HEX): Define variable.
(DATA): Rename to ...
(PKGLIB): ... this. Update all users.
(PKGDATA): New variable.
(pkgdata_IMAGES): Rename to ...
(pkglib_IMAGES): ... this. Update all users.
(pkgdata_MODULES): Rename to ...
(pkglib_MODULES): ... this. Update all users.
(pkgdata_PROGRAMS): Rename to ...
(pkglib_PROGRAMS): ... this. Update all users.
(pkgdata_DATA): Rename to ...
(pkglib_DATA): ... this. Update all users.
(CLEANFILES): Redefine to `$(pkglib_DATA) $(pkgdata_DATA)'.
(unicode.pff, ascii.pff): New rules.
(all-local): Add `$(PKGDATA)' dependency.
(install-local): Process `$(PKGDATA)'.
* util/update-grub_lib.in (font_path): Search for *.pff files in
a few more locations, including `${pkgdata}'.
* util/grub-mkdevicemap.c (make_device_map): Iterate up to 20 for
IDE disk check, since Linux is known to support 20 IDE disks.
Reported by Colin Watson.
linker. If yes, add it to TARGET_LDFLAGS. Build ID causes
objcopy to generate incorrect binary files (binutils
2.17.50.0.18-1 as shipped by Fedora 8).
* aclocal.m4 (grub_PROG_OBJCOPY_ABSOLUTE): Use LDFLAGS when
linking, so that build ID doesn't break the test.
* util/console.c (grub_ncurses_getkey): Change curses KEY_* mapping,
now return control chars instead of GRUB_CONSOLE_KEY_* constants.
This fixes the problem that function keys did not work in grub-emu.
* disk/host.c (grub_host_open): Remove attribute unused from
name parameter. Add check for "host". This fixes the problem
that grub-emu does not find partitions.
* include/grub/i386/efi/machine.h: New file.
* include/grub/i386/linuxbios/machine.h: Likewise.
* include/grub/i386/pc/machine.h: Likewise.
* include/grub/powerpc/ieee1275/machine.h: Likewise.
* include/grub/sparc64/ieee1275/machine.h: Likewise.
* term/i386/pc/serial.c: Include <grub/machine/machine.h>.
(serial_hw_io_addr): New variable.
(serial_hw_get_port): Obtain port address from `serial_hw_io_addr'
instead of `(unsigned short *) 0x400'.
* kern/disk.c (grub_disk_firmware_fini)
(grub_disk_firmware_is_tainted): New variables.
* include/grub/disk.h (grub_disk_firmware_fini)
(grub_disk_firmware_is_tainted): Likewise.
* disk/i386/pc/biosdisk.c (GRUB_MOD_FINI(biosdisk)): Moved from here ...
(grub_disk_biosdisk_fini): ... to here.
(GRUB_MOD_FINI(biosdisk)): Implement using grub_disk_biosdisk_fini().
(GRUB_MOD_INIT(biosdisk)): Abort when `grub_disk_firmware_is_tainted'
is set. Register grub_disk_biosdisk_fini() in
`grub_disk_firmware_fini'.
* disk/ata.c: Remove `<grub/machine/biosdisk.h>'.
(GRUB_MOD_INIT(ata)): Remove grub_biosdisk_fini() call.
Use `grub_disk_firmware_is_tainted' and `grub_disk_firmware_fini'
to finish existing firmware disk interface.
* conf/i386-linuxbios.rmk (pkgdata_MODULES): Add `ata.mod'.
(ata_mod_SOURCES): New variable.
(ata_mod_CFLAGS): Likewise.
(ata_mod_LDFLAGS): Likewise.
* term/i386/pc/vga_text.c: Include <grub/cpu/io.h>.
(CRTC_ADDR_PORT): New macro.
(CRTC_DATA_PORT): Likewise.
(CRTC_CURSOR): Likewise.
(CRTC_CURSOR_ADDR_HIGH): Likewise.
(CRTC_CURSOR_ADDR_LOW): Likewise.
(update_cursor): New function.
(grub_console_real_putchar): Call `update_cursor'.
(grub_console_gotoxy): Likewise.
(grub_console_cls): Set the default color when clearing the
screen.
(grub_console_setcursor): Implemented.
* disk/ata.c (grub_ata_pio_read): Don't wait for the command to
become activate.
(grub_ata_pio_write): Likewise.
(grub_atapi_identify): Wait after issuing an ATA command.
(grub_atapi_packet): Likewise.
(grub_ata_identify): Likewise.
(grub_ata_readwrite): Likewise.
* disk/ata.c (grub_ata_pio_read): Detect and return the error code.
(grub_ata_pio_write): Likewise.
(grub_ata_readwrite): Use `grub_error', instead of
returning `grub_errno'.
* include/grub/i386/pc/init.h (grub_lower_mem): Moved from here ...
* include/grub/i386/pc/memory.h (grub_lower_mem): ... to here.
* include/grub/i386/pc/init.h (grub_upper_mem): Moved from here ...
* include/grub/i386/pc/memory.h (grub_upper_mem): ... to here.
* include/grub/i386/pc/memory.h: Include `<grub/symbol.h>' and
`<grub/types.h>'.
* loader/i386/pc/multiboot.c: Include `<grub/machine/memory.h>'.
* genmk.rb (Image): Copy `extra_flags' from here ...
(PModule): ... to here. Use it in `#{obj}: #{src}' rule.
* commands/i386/cpuid.c (grub_cmd_cpuid): Add __attribute__ ((unused))
to `argc' and `args' arguments.
* kern/i386/loader.S: New file.
* kern/i386/pc/startup.S (grub_linux_prot_size): Moved from here ...
* kern/i386/loader.S (grub_linux_prot_size)... to here.
* kern/i386/pc/startup.S (grub_linux_tmp_addr): Moved from here ...
* kern/i386/loader.S (grub_linux_tmp_addr)... to here.
* kern/i386/pc/startup.S (grub_linux_real_addr): Moved from here ...
* kern/i386/loader.S (grub_linux_real_addr)... to here.
* kern/i386/pc/startup.S (grub_linux_boot_zimage): Moved from here ...
* kern/i386/loader.S (grub_linux_boot_zimage)... to here.
* kern/i386/pc/startup.S (grub_linux_boot_bzimage): Moved from here ...
* kern/i386/loader.S (grub_linux_boot_bzimage)... to here.
* kern/i386/pc/startup.S (grub_multiboot_real_boot): Moved from here ...
* kern/i386/loader.S (grub_multiboot_real_boot)... to here.
* kern/i386/pc/startup.S (grub_multiboot2_real_boot): Moved from here ...
* kern/i386/loader.S (grub_multiboot2_real_boot)... to here.
* kern/i386/realmode.S: New file.
* kern/i386/pc/startup.S (protstack): Moved from here ...
* kern/i386/realmode.S (protstack)... to here.
* kern/i386/pc/startup.S (gdt): Moved from here ...
* kern/i386/realmode.S (gdt)... to here.
* kern/i386/pc/startup.S (prot_to_real): Moved from here ...
* kern/i386/realmode.S (prot_to_real)... to here.
* kern/i386/pc/startup.S: Include `kern/i386/loader.S' and
`kern/i386/realmode.S'.
* normal/misc.c (grub_normal_print_device_info): Do not probe for
filesystem when dev->disk is unset.
Do probe for filesystem even when dev->disk->has_partitions is set.
In case a filesystem is found, always report it.
In case it isn't, if dev->disk->has_partitions is set, report that
a partition table was found instead of reporting that no filesystem
could be identified.
* kern/powerpc/ieee1275/init.c: Rename HEAP_LIMIT to HEAP_MAX_ADDR,
and make it easier to figure out.
Add HEAP_MIN_SIZE and HEAP_MAX_ADDR definitions.
(grub_claim_heap): Use HEAP_MAX_ADDR rather than taking a parameter.
Do not avoid claiming a region above HEAP_MAX_ADDR if that would
leave us with less than HEAP_MIN_SIZE total heap.
Avoid our total amount of heap to surpass HEAP_MAX_SIZE.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_test_flag): Detect
SmartFirmware version updates (as released by Sven Luther), and avoid
setting GRUB_IEEE1275_FLAG_NO_PARTITION_0 or
GRUB_IEEE1275_FLAG_0_BASED_PARTITIONS unless the running version is
known broken.
Do not use devices at boot in chainloading.
* loader/i386/pc/chainloader.c (boot_drive): New variable.
(boot_part_addr): Likewise.
(grub_chainloader_boot): Simply call grub_chainloader_real_boot
with BOOT_DRIVE and BOOT_PART_ADDR.
(grub_chainloader_cmd): Set BOOT_DRIVE and BOOT_PART_ADDR.
Reported by Hitoshi Ozeki <h-ozeki@ck2.so-net.ne.jp>.
Patch from Simon Peter <dn.tlp@gmx.net>:
* genmk.rb (Utility): Append $(#{src}_DEPENDENCIES) to #{obj} targets.
* conf/i386-pc.rmk: Replace grub-probe_DEPENDENCIES with
util/grub-probe.c_DEPENDENCIES. Replace grub-setup_DEPENDENCIES with
util/i386/pc/grub-setup.c_DEPENDENCIES.
* conf/i386-efi.rmk: Replace grub-probe_DEPENDENCIES with
util/grub-probe.c_DEPENDENCIES.
* conf/powerpc-ieee1275.rmk: Likewise.
for powerpc & i386-pc. This patch was more so started by Hollis
Blanchard getting multiboot 2 working for powerpc and I added to it
and cleaned it up.
One of the ideas with this patch is to keep everything under one
command for the user. So instead of having a "multiboot2" & "module2"
command, I created a proxy like mechanism so that you have only one
command for both multiboot 1 & 2 ... "multiboot". This is where
"loader/multiboot_loader.c" comes from. I could have integrated things
more but I figure the current approach will less likely break
anything.
So if your OS is multiboot 2 capable, the user would do the following
to load it up from a grub prompt:
grub> multiboot <location of kernel> <kernel args>
grub> module <some image> <multiboot tag> <image arguments>
grub> module <isome mage> <multiboot tag> <image arguments>
grub .....
The other thing that this patch does is it begins to make the
multiboot 1 code a bit more architecture agnostic so IF someone wanted
to implement it on another architecture they can.
A bit of file moving around and definition renaming is also apart of
this patch. I have also taken the time to make sure that it does not
break multiboot 1 loading on i386-pc. But mulitboot 2 may still need a
little more testing and work for i386-pc. Powerpc multiboot 2 has been
heavily tested and does work.
* geninitheader.sh: Process file specified in first parameter rather
than hardcoding grub_modules_init.lst.
* geninit.sh: Likewise. Also, construct header name dynamicaly rather
than hardcoding grub_modules_init.h.
* conf/common.rmk: Rename grub_modules_init.[ch] files associated with
grub-emu to grub_emu_init.[ch]. Add rules to build analogous
grub_probe_init.[ch] and grub_setup_init.[ch].
* conf/powerpc-ieee1275.rmk (grub_emu_DEPENDENCIES): Replace
grub_modules_init.h with grub_emu_init.h.
(grub_probe_DEPENDENCIES, grub_probe_SOURCES): Add new
grub_probe_init.[ch] files.
* conf/i386-efi.rmk: Likewise.
* conf/i386-pc.rmk: Likewise.
(grub_setup_DEPENDENCIES, grub_setup_SOURCES): Add new
grub_setup_init.[ch] files.
* util/grub-emu.c: Replace grub_modules_init.h with grub_emu_init.h.
* util/grub-probe.c: Include grub_probe_init.h. Use grub_init_all()
to initialize modules rather than a list of hardcoded functions.
* util/i386/pc/grub-setup.c: Include grub_setup_init.h. Use
grub_init_all() to initialize modules rather than a list of hardcoded
functions.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): Add
GRUB_IEEE1275_FLAG_BROKEN_OUTPUT flag.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_find_options): Set this
flag when running on SmartFirmware.
* term/ieee1275/ofconsole.c (grub_ofconsole_init): Avoid running
"output-device output" command when GRUB_IEEE1275_FLAG_BROKEN_OUTPUT
was set.
* kern/powerpc/ieee1275/openfw.c (grub_ieee1275_encode_devname):
Increase partno when GRUB_IEEE1275_FLAG_0_BASED_PARTITIONS flag is set,
rather than decreasing it.
* util/i386/pc/grub-setup.c (setup): When embedding is required, but
there's not enough space to do it, fail in the same way as when it
can't be done because there are no partitions.
* util/powerpc/ieee1275/grub-install.in: Improve error message shown
when nvsetenv failed.
* conf/i386-pc.rmk (CLEANFILES): Removed for grub-mkrescue,
because this rule is automatically generated.
(grub-mkrescue): Removed for the same reason as above.
* util/i386/efi/grub-install.in: Allow `grub_probe --target=partmap'
invocation to fail, in order to support partition-less media.
* util/i386/pc/grub-install.in: Likewise.
* util/powerpc/ieee1275/grub-install.in: Use grub-probe to determine
which fs or partmap modules are needed (akin to its sister scripts).
Also use grub-probe to get rid of unportable /proc/mounts check.
Print the same informational message that the other scripts do, before
exitting.
* util/update-grub_lib.in (font_path): New function. Determine wether
a font file can be found and, if so, echo the GRUB path to it.
* util/update-grub.in: Handle multiple terminals depending on user
input, platform availability and font file presence. Propagate
variables of our findings to /etc/grub.d/ children.
* util/grub.d/00_header.in: Handle multiple terminals, based on
environment setup by update-grub.
* include/grub/i386/pc/kernel.h: Define GRUB_KERNEL_MACHINE_DATA_END to
indicate end of data section in kernel image.
* include/grub/i386/efi/kernel.h: Define GRUB_KERNEL_MACHINE_PREFIX and
GRUB_KERNEL_MACHINE_DATA_END.
* kern/i386/pc/startup.S: Do not initialize grub_prefix, only reserve
space for it.
* kern/i386/efi/startup.S: Likewise.
* util/i386/pc/grub-mkimage.c: Initialize grub_prefix to /boot/grub
during image generation. Implement --prefix option to override this
patch.
* util/i386/efi/grub-mkimage.c: Likewise.
* util/update-grub_lib.in (convert_system_path_to_grub_path): Split
code to make path relative to its root into a separate function.
* util/i386/pc/grub-install.in: Use newly provided
make_system_path_relative_to_its_root() to convert ${grubdir}, then
pass the result to grub-install --prefix.
* include/grub/util/misc.h: Define DEFAULT_DIRECTORY and
DEFAULT_DEVICE_MAP.
* util/grub-emu.c: Use above definitions from misc.h instead of
defining them.
* util/grub-mkdevicemap.c: Likewise.
* util/i386/pc/grub-setup.c: Likewise.
* util/grub-probe.c: Likewise.
(probe): Abort with grub_util_error() when either
grub_guess_root_device or grub_util_get_grub_dev fails.
* normal/command.c (grub_command_execute): Use NULL rather than 0 for
"pager" assignment.
* util/biosdisk.c (grub_util_biosdisk_get_grub_dev): Likewise for
"pcdata".
* util/grub-probe.c (probe): Likewise for "drive_name".
* util/i386/pc/grub-mkrescue.in: Add "set -e".
Add --pkglibdir=DIR option to override pkglibdir.
Mention --image-type=TYPE in help output.
Fix --grub-mkimage (it was a no-op).
Abort gracefuly when no parameter is given.
* util/update-grub_lib.in (convert_system_path_to_grub_path): Abort if
file doesn't exist, or if it is in a filesystem grub can't read.
* util/update-grub.in: Set fallback for GRUB_FS check to "unknown". Do
not abort if GRUB_DRIVE could not be defined. Rearrange generated
header comment to fit in 80 columns when the variables are resolved.
* util/grub.d/00_header.in: Only set root variable when GRUB_DRIVE
could be identified by update-grub. Remove redundant check for
unifont.pff existance (since convert_system_path_to_grub_path now
handles that).
* conf/powerpc-ieee1275.rmk: Enable grub-mkdevicemap and grub-probe.
* include/grub/partition.h: Declare grub_apple_partition_map_init and
grub_apple_partition_map_fini.
* util/biosdisk.c
(grub_util_biosdisk_open): Replace BLKGETSIZE with BLKGETSIZE64 (needed
to access >2 TiB disks).
Print disk->total_sectors with %llu instead of %lu, since this
variable is always 64-bit (prevents wrong disk size from being displayed
on either >2 TiB disk or big-endian CPU).
(grub_util_biosdisk_get_grub_dev): Convert gpt_partition_map handling
into a generic case that supports all (sane) partition maps.
Stop using grub_cpu_to_le32() on dos_part / bsd_part since it actually
breaks big-endian.
* util/grub-probe.c: Call grub_apple_partition_map_init() before probe()
and grub_apple_partition_map_fini() after that.
* util/update-grub_lib.in: New file.
* DISTLIST: Add update-grub_lib.in.
* conf/common.rmk: Generate update-grub_lib and install it in
$(lib_DATA).
* Makefile.in: Add install routine for $(lib_DATA).
* util/grub.d/00_header.in: Use convert_system_path_to_grub_path()
function provided by update-grub_lib to support arbitrary paths of
unifont.pff.
* util/update-grub.in: Use convert_system_path_to_grub_path() to
initialize GRUB_DRIVE_BOOT and GRUB_DRIVE_BOOT_GRUB variables.
* util/biosdisk.c (linux_find_partition): Allocate real_dev on the
stack instead of on the heap.
* kern/disk.c (grub_disk_read): Make sure tmp_buf is big enough
before doing a read on it.
* configure.ac: Only use -fno-stack-protector for the target
environment.
* util/getroot.c (grub_guess_root_device): Remove RAID and LVM
code, first search for device in /dev/mapper, then in /dev.
(grub_util_get_grub_dev): New function.
* include/grub/util/getroot.h (grub_util_get_grub_dev): Add
prototype.
* util/grub-probe.c (probe): Remove check for RAID, call
grub_util_get_grub_dev() instead of
grub_util_biosdisk_get_grub_dev().
* util/grub-emu.c (main): Call grub_util_get_grub_dev() instead of
grub_util_biosdisk_get_grub_dev().
* util/i386/pc/grub-setup.c (main): Likewise.
* DISTLIST: Update for the latest changes.
* conf/i386-pc.rmk: Use the new paths for util/getroot.c,
util/grub-mkdevicemap.c, util/grub-probe.c and util/biosdisk.c.
* util/grub-emu.c: Replace grub/i386/pc/util/biosdisk.h with
grub/util/biosdisk.h.
* util/i386/pc/grub-setup.c: Replace grub/machine/util/biosdisk.h with
grub/util/biosdisk.h.
* include/grub/i386/pc/util/biosdisk.h: Moved to ...
* include/grub/util/biosdisk.h: ... here.
* util/i386/pc/biosdisk.c: Moved to ...
* util/biosdisk.c: ... here.
* util/i386/pc/getroot.c: Moved to ...
* util/getroot.c: ... here.
* util/i386/pc/grub-mkdevicemap.c: Moved to ...
* util/grub-mkdevicemap.c: ... here.
* util/i386/pc/grub-probe.c: Moved to ...
* util/grub-probe.c: ... here.
* util/update-grub.in: Fix a few assumptions about the devices holding
/, /boot and /boot/grub being the same.
* util/grub.d/00_header.in: Likewise.
* util/grub.d/10_hurd.in: Likewise.
* util/grub.d/10_linux.in: Likewise.
* util/grub.d/10_linux.in: Implement Linux image sorting with arbitrary
patterns. Use that to define the `.old' suffix as older than `'.
* util/grub.d/00_header.in: Set default gfxmode to `800x600x16'.
* util/update-grub.in: Add a reference to ${sysconfdir}/default/grub in
the grub.cfg header message.
* util/update-grub.in: Create device.map if it doesn't already exist,
before attempting to run grub-probe.
Check for grub-probe and grub-mkdevicemap with the same code
grub-install is using.
Remove test mode.
* util/i386/pc/grub-probe.c: Add `grub-probe -t partmap' parameter to
determine partition map module.
* util/i386/pc/grub-install.in: Use this feature to decide which
partition module to load, instead of hardcoding pc and gpt.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add partmap/gpt.c.
(grub_probe_SOURCES): Likewise.
* util/i386/pc/biosdisk.c (grub_util_biosdisk_get_grub_dev): Detect
GPT and initialize dos_part and bsd_part accordingly.
* util/i386/pc/grub-setup.c (setup): Ditto for install_dos_part and
install_bsd_part.
(main): Activate gpt module for use during partition identification,
and deactivate it afterwards.
* util/i386/pc/grub-install.in: Add gpt module to core.img.
* util/i386/pc/grub-probe.c (main): Activate gpt module for use during
partition identification, and deactivate it afterwards.
* util/grub-emu.c: Move initialization functions
grub_util_biosdisk_init() and grub_init_all() before
grub_util_biosdisk_get_grub_dev(), which relies on them.
