Recent tests have discovered that many of our filesystems have flawed
handling of "." and "..". Rather than attempting to fix it in filesystems
themselves, make the common code fshelp aware of "." and ".." and handle
them in this layer. Add grub_fshelp_find_file_lookup for easy conversion
of BFS, HFS and exFAT which have the same problem and don't use fshelp.
mips_attributes was introduced to work around clang problems with
-msoft-float. Those problems are now fixed and moreover .gnu_attributes
itself is unportable and creates problem with clang.
Revert "mips: Fix soft-float handling."
This partially reverts commit 6a4ecd276e.
Regression from commit:
loader/linux: do not pad initrd with zeroes at the end
a8c473288d
Wimboot fails since the change above because it expects the "trailer"
initrd element on an aligned address.
This issue shows only when newc_name is used and the last initrd
entry has a not aligned size.
Since btrfs on-disk format uses little-endian, the searched item types
(ROOT_REF, INODE_REF) need converting the byte order in order to
function properly on big-endian systems.
Emulate dot and dotdot in root directory. For other directories do not
add separator between name and extension for these two special entries.
Closes: 45335
Exclusive open on SNP will close all existing protocol instances which
may disable all receive filters on interface. Reinstall them after we
opened protocol exclusively.
Also follow UEFI specification recommendation and stop interfaces when
closing them:
Unexpected system errors, reboots and hangs can occur if an OS is loaded
and the network devices are not Shutdown() and Stopped().
Also by: Mark Salter <msalter@redhat.com>
Closes: 45204
The current code for EFI grub_exit() calls grub_efi_fini() before
returning to firmware. In the case of ARM, this leaves a timer
event running which could lead to a firmware crash. This patch
changes this so that grub_machine_fini() is called with a NORETURN
flag. This allows machine-specific shutdown to happen as well
as the shutdown done by grub_efi_fini().
Signed-off-by: Mark Salter <msalter@redhat.com>
Add support for new XFS on disk format. We have to handle optional
filetype fields in directory entries, additional CRC, LSN, UUID entries
in some structures, etc.
Signed-off-by: Jan Kara <jack@suse.cz>
Including the setjmp module in an arm64-efi image will cause it to
immediately exit with an "incompatible license" error.
The source file includes a GPLv3+ boilerplate, so fix this by declaring a
GPLv3+ license using the GRUB_MOD_LICENSE macro.
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Currently, some messages cannot be mapped to the port they belong to as
the port number is missing from the output. So add `port: n` to the
debug messages.
Run the command below
$ git grep -l schedulded | xargs sed -i 's/schedulded/scheduled/g'
and revert the change in `ChangeLog-2015`.
Including "miscellaneous" spelling fix noted by richardvoigt@gmail.com
large blocks basically use extensible dataset feature, or to be exact,
setting recordsize above 128k will trigger large_block feature to be
enabled and storing such blocks is using feature extensible dataset. so
the extensible dataset is prerequisite.
Changes implement read support extensible dataset… instead of fixed DMU
types they dont specify type, making it possible to use fat zap objects
from bonus area.
While in theory permitted by the spec, modules rarely fit in low memory
anyway and not every kernel is able to handle modules in low memory anyway.
At least VMWare is known not to be able to handle modules at arbitrary
locations.
Add the descriptions of the “core”, that means no vendorcode or payload,
coreboot time stamps added up to coreboot commit a7d92441 (timestamps:
You can never have enough of them!) [1].
Running `coreboot_boottime` in the GRUB command line interface now shows
descriptions for all time stamps again on the ASRock E350M1.
[1] http://review.coreboot.org/9608
From RFC1542:
The 'giaddr' field is rather poorly named. It exists to facilitate
the transfer of BOOTREQUEST messages from a client, through BOOTP
relay agents, to servers on different networks than the client.
Similarly, it facilitates the delivery of BOOTREPLY messages from the
servers, through BOOTP relay agents, back to the client. In no case
does it represent a general IP router to be used by the client. A
BOOTP client MUST set the 'giaddr' field to zero (0.0.0.0) in all
BOOTREQUEST messages it generates.
A BOOTP client MUST NOT interpret the 'giaddr' field of a BOOTREPLY
message to be the IP address of an IP router. A BOOTP client SHOULD
completely ignore the contents of the 'giaddr' field in BOOTREPLY
messages.
Leave code ifdef'd out for the time being in case we see regression.
Suggested by: Rink Springer <rink@rink.nu>
Closes: 43396
Currently XFS driver converted inode numbers to native endianity only
when using them to compute inode position. Although this works, it is
somewhat confusing. So convert inode numbers when reading them from disk
structures as every other field.
Signed-off-by: Jan Kara <jack@suse.cz>
Directory iteration used wrong position (sizeof wrong structure) for
termination of iteration inside a directory block. Luckily the position
ended up being wrong by just 1 byte and directory entries are larger so
things worked out fine in practice. But fix the problem anyway.
Signed-off-by: Jan Kara <jack@suse.cz>
EBDA layout is not standardized so we cannot assume first two bytes
are length. Neither is it required by ACPI standard. HP 8710W is known
to contain zeroes here.
Closes: 45002
EDK2 network stack is based on Managed Network Protocol which is layered
on top of Simple Management Protocol and does background polling. This
polling races with grub for received (and probably trasmitted) packets
which causes either serious slowdown or complete failure to load files.
Open SNP device exclusively. This destroys all child MNP instances and
stops background polling.
Exclusive open cannot be done when enumerating cards, as it would destroy
PXE information we need to autoconfigure interface; and it cannot be done
during autoconfiguration as we need to do it for non-PXE boot as well. So
move SNP open to card ->open method and add matching ->close to clean up.
Based on patch from Mark Salter <msalter@redhat.com>
Also-By: Mark Salter <msalter@redhat.com>
Closes: 41731
EDK2 PXE driver creates two child devices - IPv4 and IPv6 - with
bound SNP instance. This means we get three cards for every physical
adapter when enumerating. Not only is this confusing, this may result
in grub ignoring packets that come in via the "wrong" card.
Example of device hierarchy is
Ctrl[91] PciRoot(0x0)/Pci(0x3,0x0)
Ctrl[95] PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)
Ctrl[B4] PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)/IPv4(0.0.0.0)
Ctrl[BC] PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)/IPv6(0000:0000:0000:0000:0000:0000:0000:0000)
Skip PXE created virtual devices when enumerating cards. Make sure to
find real card when applying initial autoconfiguration during PXE boot,
this information is associated with one of child devices.
Syslinux memdisk is using initrd image and needs to know uncompressed
size in advance. For gzip uncompressed size is at the end of compressed
stream. Grub padded each input file to 4 bytes at the end, which means
syslinux got wrong size.
Linux initramfs loader apparently does not care about trailing alignment.
So change code to align beginning of each file instead which atomatically
gives us the correct size for single file.
Reported-By: David Shaw <dshaw@jabberwocky.com>
This reverts commits 47b2bee3ef
and 8d3c4544ff. It is not safe
to free allocated cards, dangling pointers main remain. Such
cleanup requires more changes in net core.
grub_memset should zero out padding after data end. It is not clear
why it is needed at all - ZFS block is at least 512 bytes and power
of two, so it is always multiple of 16 bytes. This grub_memset
apparently never did anything.
In the past birth was always zero for holes. This feature started
to make use of birth for holes as well, so change code to test for
valid DVA address instead.
If grub is signed with a key that's in the trusted EFI keyring, an attacker
can point a boot entry at grub rather than at shim and grub will fail to
locate the shim verification protocol. This would then allow booting an
arbitrary kernel image. Fail validation if Secure Boot is enabled and we
can't find the shim protocol in order to prevent this.
Hi,
Fedora's patch to forbid insmod in UEFI Secure Boot environments is fine
as far as it goes. However, the insmod command is not the only way that
modules can be loaded. In particular, the 'normal' command, which
implements the usual GRUB menu and the fully-featured command prompt,
will implicitly load commands not currently loaded into memory. This
permits trivial Secure Boot violations by writing commands implementing
whatever you want to do and pointing $prefix at the malicious code.
I'm currently test-building this patch (replacing your current
grub-2.00-no-insmod-on-sb.patch), but this should be more correct. It
moves the check into grub_dl_load_file.
It can be called with NULL for third argument. grub_divmod32* for
now are called only from within wrappers, so skip check.
Reported-By: Michael Zimmermann <sigmaepsilon92@gmail.com>
Some x86 systems might be capable of running a 64-bit Linux kernel but
only use a 32-bit EFI (e.g. Intel Bay Trail systems). It's useful for
grub-install to be able to recognise such systems, to set the default
x86 platform correctly.
To allow grub-install to know the size of the firmware rather than
just the size of the kernel, there is now an extra EFI sysfs file to
describe the underlying firmware. Read that if possible, otherwise
fall back to the kernel type as before.
Signed-off-by: Steve McIntyre <steve@einval.com>
Use the new thumb_get_instruction_word/thumb_set_instruction_word
helpers throughout.
Style cleanup (missing spaces).
Move Thumb MOVW/MOVT handlers into Thumb relocation section of file.
This restrict ARP handling to MAC and IP addresses but in practice we need
only this case anyway and other cases are very rar if exist at all. It makes
code much simpler and less error-prone.
_BSD_SOURCE was added to allow the use of DT_DIR, but that was removed
in e768b77068. While adding
_DEFAULT_SOURCE as well works around problems with current glibc,
neither is in fact needed nowadays.
argp_help attempts to translate empty string, which results in printing
meta information about translation, like in
bor@opensuse:~/build/grub> grub2-mknetdir --help
Использование: grub2-mknetdir [ПАРАМЕТР…]
Project-Id-Version: grub 2.02-pre2
Report-Msgid-Bugs-To: bug-grub@gnu.org
...
Update gnulib/argp-help.c to the current version which fixes this
(commit b9bfe78424b871f5b92e5ee9e7d21ef951a6801d).
canonicalize_file_name clashed with gnulib function. Additionally
it was declared in 2 places: emu/misc.h and util/misc.h. Added
grub_ prefix and removed second declaration.
libgcc for boot environment isn't always present and compatible.
libgcc is often absent if endianness or bit-size at boot is different
from running OS.
libgcc may use optimised opcodes that aren't available on boot time.
So instead of relying on libgcc shipped with the compiler, supply
the functions in GRUB directly.
Tests are present to ensure that those replacement functions behave the
way compiler expects them to.
All current ciphers have blocks which are power of 2 and it's
unlikely to change. Other block length would be tricky to handle anyway.
This restriction allows avoiding extra divisions.
Add -msoft-float alongside clang arguments to specify ABI.
Specify ABI in asm files explicitly.
This trigers asm warning due to gcc failing to propagate -msoft-float
but it's tolerable.
Previously we supplied only unsigned divisions on platforms that need software
division.
Yet compiler may itself use a signed division. A typical example would be a
difference between 2 pointers which involves division by object size.
Avoid micro-optimization in grub_diskfilter_make_raid and make sure
name and fullname are independent strings. This avoids need to special
case it everywhere else.
Also fix memory leak in failure case in grub_diskfilter_make_raid.
Closes: 41582
Commit 750f4bacd3 put LV validation before
actual vg assignment. Make grub_diskfilter_make_raid to assign ->vg as
happens in other cases for consistency. Also clean up redundant code and add
explicit NULL lv->vg check in validate_lv.
Also fix segment validation in validate_lv; it became obvious when crash
was fixed.
Closes: 44199
GCC 4.9 also generates R_ARM_THM_MOVW_ABS_NC and R_ARM_THM_MOVT_ABS,
as an alternative to ABS32.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
strlcpy is not available on Linux as part of standard libraries.
It probably is not worth extra configure checks espicially as we
need to handle missing function anyway.
Old condition was used to zero-out header variable on exit of the loop.
This is correct but confusing. Replace with in-loop logic.
Found by: Coverity Scan.
To be compatible with legacy pv-grub, sort disks by increasing order of handle
value. This allows reusing legacy pv-grub menu.lst which is using hdX names.
Suggested-By: Michael Chang <mchang@suse.com>
Closes: 44026
The unaligned local in __aeabi_uidivmod leads to a store to a 64bit
value at an address that is not divisible by 8 (in grub_divmod64).
The compiler most likely generates a STRD instruction to store it and
this causes an exception.
Fixes Savannah bug #43632.
This includes improvements done by Leif Lindholm.
Using the http module to download config files, produces memory errors,
after the config file is downloaded.
The error was traced to the tcp stack in grub-core/net/tcp.c. The wrong
netbuff pointer was being freed in the clean up loop.
Changing the code to free the correct netbuff pointer removes the runtime
error.
Closes 42765.
grub_pubkey_open closed original file after it was read; it set
io->device to NULL to prevent grub_file_close from trying to close device.
But network device itself is stacked (net -> bufio); and bufio preserved
original netfs file which hold reference to device. grub_file_close(io)
called grub_bufio_close which called grub_file_close for original file.
grub_file_close(netfs-file) now also called grub_device_close which
freed file->device->net. So file structure returned by grub_pubkey_open
now had device->net pointed to freed memory. When later file was closed,
it was attempted to be freed again.
Change grub_pubkey_open to behave like other filters - preserve original
parent file and pass grub_file_close down to parent. In this way only the
original file will close device. We really need to move this logic into
core instead.
Also plug memory leaks in error paths on the way.
Reported-By: Robert Kliewer <robert.kliewer@gmail.com>
Closes: bug #43601
configure_ciphers:
- several memory leaks where allocated ciphers were not freed. CID: 73813,
73710
- use after free. It is probably quite innocent as grub is single threaded,
but could potentially be a problem with memory allocator debugger turned on.
CID: 73730
luks_recover_key:
- memory leak. CID: 73854
Many routers have long router advertisment interval configured by
default. The Neighbor Discovery protocol (RFC4861) has defined default
MaxRtrAdvInterval value as 600 seconds and
MinRtrAdvInterval as 0.33*MaxRtrAdvInterval. This makes
net_ipv6_autoconf fails more often than not as currently it passively
listens the RA message to perfom address autoconfiguration.
This patch tries to send router solicitation to overcome the problem of
long RA interval.
v2:
use cpu_to_be macro for network byte order conversion
add missing error handling
Basic usage would look something like this:
gptprio.next -d usr_dev -u usr_uuid
linuxefi ($usr_dev)/boot/vmlinuz mount.usr=PARTUUID=$usr_uuid
After booting the system should set the 'successful' bit on the
partition that was used.
The EFI version of grub_machine_get_bootlocation crops the boot image
name back to the last / in order to get a directory path. However, it
does not check that *name is actually set before calling grub_strrchr
to do this, and neither does grub_strrchr before dereferencing a NULL
pointer.
Parent function, grub_set_prefix_and_root, does check the pointer
before using.
The structure size used in grub_netbuff_pull to get the pointer to
option header is apparently wrong, which leads to subsequent range check
failed and therefore not responding to any neighbor solicit message in my
testing.
The first hint of something practical, a command that can restore any of
the GPT structures from the alternate location. New test case must run
under QEMU because the loopback device used by the other unit tests does
not support writing.
The header location fields refer to 'this header' and 'alternate header'
respectively, not 'primary header' and 'backup header'. The previous
field names are backwards for the backup header.
This module is a new implementation for reading GUID Partition Tables
which is much stricter than the existing part_gpt module and exports GPT
data directly instead of the generic grub_partition structure. It will
be the basis for modules that need to read/write/update GPT data.
The current code does nothing more than read and verify the table.
struct ... foo = { 0, } is valid initializer, but older GCC emits
warning which is fatal error due to -Werror=missing-field-initializer.
So simply use full initializer to avoid these errors. This was fixed
probably in GCC 4.7.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36750
The AML parser implements only a small subset of possible AML
opcodes. On the Fujitsu Lifebook E744 this and another bug in
the parser (incorrect handling of TermArg data types) would lead
to the laptop not turning off (_S5 not found).
* grub-core/commands/acpihalt.c: Support OpAlias in the AML parser;
in skip_ext_op(), handle some Type2Opcodes more correctly (TermArgs
aren't always simply strings!); Add function to skip TermArgs
* include/grub/acpi.h: Add new opcodes
Currently, if "linux" fails, the "goto fail;" in grub_cmd_initrd sends us
into grub_initrd_close() without grub_initrd_init() being called, and thus
it never clears initrd_ctx->components. grub_initrd_close() then frees that
address, which is stale data from the stack. If the stack happens to have a
stale *address* there that matches a recent allocation, then you'll get a
double free later.
So initialize the memory up front.
Signed-off-by: Peter Jones <pjones@redhat.com>
We encountered a weird random kernel initrd unpacking error on btrfs
and finally found it was caused by incorrect address reference in range
check for type GRUB_BTRFS_EXTENT_REGULAR and the entire result is
unpredictable.
This is a quick fix to make the address reference to the
grub_btrfs_extent_data structure correctly, not the pointer variable
to it.
Any suggestions to this patch is welcome.
* configure.ac: Remove -m64 from checks for -mcmodel=large and
-mno-red-zone. These are always either unnecessary (x86_64-emu) or
already in TARGET_CFLAGS at this point, and they produce incorrect
results when building for x32.
* grub-core/kern/x86_64/dl.c (grub_arch_dl_relocate_symbols): Cast
pointers to Elf64_Xword via grub_addr_t, in order to work on x32.
* include/grub/x86_64/types.h (GRUB_TARGET_SIZEOF_VOID_P,
GRUB_TARGET_SIZEOF_LONG): Define to 4 on x32.
Commit 588744d0dc caused grub-mkconfig
no longer to be forgiving of trailing spaces on grub-probe output
lines, which among other things means that util/grub.d/10_linux.in
no longer detects LVM. To fix this, make grub-probe's output
delimiting more consistent. As a bonus, this improves the coverage
of the -0 option.
Fixes Debian bug #735935.
* grub-core/disk/cryptodisk.c
(grub_util_cryptodisk_get_abstraction): Add a user-data argument.
* grub-core/disk/diskfilter.c (grub_diskfilter_get_partmap):
Likewise.
* include/grub/cryptodisk.h (grub_util_cryptodisk_get_abstraction):
Update prototype.
* include/grub/diskfilter.h (grub_diskfilter_get_partmap): Likewise.
* util/grub-install.c (push_partmap_module, push_cryptodisk_module,
probe_mods): Adjust for extra user-data arguments.
* util/grub-probe.c (do_print, probe_partmap, probe_cryptodisk_uuid,
probe_abstraction): Use configured delimiter. Update callers.
is_qemu is not being set lead to disabling of feature like
GRUB_IEEE1275_FLAG_HAS_CURSORONOFF. This resulted in cursor not being
displayed during the grub-menu edit.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
It enables net boot even when there is no bootp/dhcp server.
* grub-core/net/drivers/ieee1275/ofnet.c: Add grub_ieee1275_parse_bootpath and
call it at grub_ieee1275_net_config_real.
* grub-core/kern/ieee1275/init.c: Add bootpath to grub_ieee1275_net_config.
* include/grub/ieee1275/ieee1275.h: Likewise.
In net/net.c there is a while (1) that only exits if there is a stop
condition and more then 10 packages or if there is no package received.
If GRUB is idle and enter in this loop, the only condition to leave is
if it doesn't have incoming packages. In a network with heavy traffic
this never happens.
Many tests fail when run as a non-root user on FreeBSD. The failures
all amount to an inability to open files using grub_util_fd_open,
because we cannot set the kern.geom.debugflags sysctl. This sysctl is
indeed important to allow us to do such things as installing GRUB to the
MBR, but if we need to do that and can't then we will get an error
later. Enforcing it here is unnecessary and prevents otherwise
perfectly reasonable operations.
In file included from ./include/grub/dl.h:23:0,
from grub-core/lib/libgcrypt-grub/cipher/rfc2268.c:3:
./include/grub/list.h:34:18: warning: conflicting types for 'grub_list_push' [en
abled by default]
void EXPORT_FUNC(grub_list_push) (grub_list_t *head, grub_list_t item);
^
./include/grub/symbol.h:68:25: note: in definition of macro 'EXPORT_FUNC'
# define EXPORT_FUNC(x) x
^
In file included from ./include/grub/fs.h:30:0,
from ./include/grub/file.h:25,
from ./grub-core/lib/posix_wrap/stdio.h:23,
from c:\mingw\include\libintl.h:314,
from ./include/grub/i18n.h:33,
from ./include/grub/misc.h:27,
from ./include/grub/list.h:25,
from ./include/grub/dl.h:28,
from grub-core/lib/libgcrypt-grub/cipher/rfc2268.c:3:
./include/grub/partition.h:106:3: note: previous implicit declaration of 'grub_l
ist_push' was here
grub_list_push (GRUB_AS_LIST_P (&grub_partition_map_list),
^
list.h needs just ATTRIBUTE_ERROR from misc.h; split compiler features
into separate file grub/compiler.h and include it instead.
This allows providing separate LDFLAGS for build and host environments, which
are not necessary the same for cross-compile case. In particular, it allows
building host programs statically to not depend on presence of libraries at
run-time (e.g. MinGW DLLs on Windows) while continue to use default dynamic
linking at build time.
Also fix obsolete comments in confgure.ac - we do use different environment
for build and host now.
The length of the Device Path End entry in the grub_linux_boot()
function was incorrectly set to 0. This triggers an assert failure
in debug builds of Tianocore.
Set it to sizeof (grub_efi_device_path_t).
* grub-core/osdep/unix/getroot.c (strip_extra_slashes): Move inside
!defined (__GNU__).
(xgetcwd): Likewise.
* include/grub/emu/hostdisk.h (grub_util_hurd_get_disk_info)
[__GNU__]: Add prototype.
* util/getroot.c (grub_util_biosdisk_get_grub_dev) [__GNU__]: Format
long int using %ld rather than %d.
To reproduce the problem, make sure you have a GPG public key available, build and install GRUB:
grub-install --debug --debug-image="all" --pubkey=/boot/pubkey.gpg --modules="serial terminfo gzio search search_label search_fs_uuid search_fs_file linux vbe video_fb video mmap relocator verify gcry_rsa gcry_dsa gcry_sha256 hashsum gcry_sha1 mpi echo loadenv boottime" /dev/sda
Sign all the files in /boot/grub/* and reboot.
'make check' results identical before and after this change.
TESTED: In a QEMU VM using an i386 target.
