uboot_disk_write() is currently lacking the write support
to storage devices because, historically, those devices did not
implement block_write() in U-Boot.
The solution has been tested using a patched U-Boot loading
and booting GRUB in a QEMU vexpress-a9 environment.
The disk write operations were triggered with GRUB's save_env
command.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add support for performing basic TPM measurements. Right now this only
supports extending PCRs statically and only on UEFI. In future we might
want to have some sort of mechanism for choosing which events get logged
to which PCRs, but this seems like a good default policy and we can wait
to see whether anyone has a use case before adding more complexity.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add all usable memory regions to grub memory management and add the
needed mmap iterate code, which will be used by grub core (e.g.
grub-core/lib/relocator.c or grub-core/mmap/mmap.c).
As we are running in 32-bit mode don't add memory above 4GB.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Initialize the needed Xen specific data. This is:
- the Xen start of day page containing the console and Xenstore ring
page PFN and event channel
- the grant table
- the shared info page
Write back the possibly modified memory map to the hypervisor in case
the guest is reading it from there again.
Set the RSDP address for the guest from the start_info page passed
as boot parameter.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Retrieve the memory map from the hypervisor and normalize it to contain
no overlapping entries and to be sorted by address.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Add the needed code to setup the hypercall page for calling into the
Xen hypervisor.
Import the XEN_HVM_DEBUGCONS_IOPORT define from Xen unstable into
include/xen/arch-x86/xen.h
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Add the code for the Xen PVH mode boot entry.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Add the hooks to current code needed for Xen PVH. They will be filled
with code later when the related functionality is being added.
loader/i386/linux.c needs to include machine/kernel.h now as it needs
to get GRUB_KERNEL_USE_RSDP_ADDR from there. This in turn requires to
add an empty kernel.h header for some i386 platforms (efi, coreboot,
ieee1275, xen) and for x86_64 efi.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
grub_xen_ptr2mfn() returns the machine frame number for a given pointer
value. For Xen-PVH guests this is just the PFN. Add the PVH specific
variant.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Rearrange grub-core/kern/xen/init.c to prepare adding PVH mode support
to it. This includes putting some code under #ifdef GRUB_MACHINE_XEN
as it will not be used when running as PVH.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Some common code needs to be special cased for Xen PVH mode. This hits
mostly Xen PV mode specific areas.
Split include/grub/i386/pc/int_types.h off from
include/grub/i386/pc/int.h to support including this file later from
xen_pvh code without the grub_bios_interrupt definition.
Move definition of struct grub_e820_mmap_entry from
grub-core/mmap/i386/pc/mmap.c to include/grub/i386/memory.h in order
to make it usable from xen_pvh code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Initialize the grant tab in a dedicated function. This will enable
using it for PVH guests, too.
Call the new function from grub_machine_init() as this will later
be common between Xen PV and Xen PVH mode.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Let's provide file type info to the I/O layer. This way verifiers
framework and its users will be able to differentiate files and verify
only required ones.
This is preparatory patch.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
The 32-bit arm efi port now shares the 64-bit linux loader, so delete
the now unused bits from the 32-bit linux loader.
This in turn leaves the grub-core/kern/arm/efi/misc.c unused, so
delete that too.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The arm64 and arm linux kernel EFI-stub support presents pretty much
identical interfaces, so the same linux loader source can be used for
both architectures.
Switch 32-bit ARM UEFI platforms over to the existing EFI-stub aware
loader initially developed for arm64.
This *WILL* stop non-efistub Linux kernels from booting on arm-efi.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Since ARM platforms do not have a common memory map, add a helper
function that finds the lowest address region with the EFI_MEMORY_WB
attribute set in the UEFI memory map.
Required for the arm64 efi linux loader to restrict the initrd
location to where it will be accessible by the kernel at runtime.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are several implementations of this function in the tree.
Add a central version in grub-core/efi/mm.c.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Read from NULL pointer canon in function grub_machine_get_bootlocation().
Function grub_ieee1275_canonicalise_devname() may return NULL.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Split up some of the functionality in grub_machine_get_bootlocation into
grub_ieee1275_get_boot_dev. This will allow for code reuse in a follow on
patch.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Return the 64bit number of blocks of storage associated with the device or
instance. Where a "block" is a unit of storage consisting of the number of
bytes returned by the package's "block-size" method. If the size cannot be
determined, or if the number of blocks exceeds the range return -1.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Return the number of blocks of storage associated with the device or
instance. Where a "block" is a unit of storage consisting of the number
of bytes returned by the package's "block-size" method. If the size cannot
be determined, the #blocks method returns the maximum unsigned integer
(which, because of Open Firmware's assumption of two's complement arithmetic,
is equivalent to the signed number -1). If the number of blocks exceeds
the range of an unsigned number, return 0 to alert the caller to try
the #blocks64 command.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
IEEE Std 1275-1994 Standard for Boot (Initialization Configuration)
Firmware: Core Requirements and Practices
3.8.3 deblocker support package
Any package that uses the "deblocker" support package must define
the following method, which the deblocker uses as a low-level
interface to the device
block-size ( -- block-len ) Return "granularity" for accesses to this
device.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
IEEE 1275-1994 Standard for Boot (Initialization Configuration)
Firmware: Core Requirements and Practices
E.3.2.2 Bus-specific methods for bus nodes
A package implementing the scsi-2 device type shall implement the
following bus-specific method:
no-data-command ( cmd-addr -- error? )
Executes a simple SCSI command, automatically retrying under
certain conditions. cmd-addr is the address of a 6-byte command buffer
containing an SCSI command that does not have a data transfer phase.
Executes the command, retrying indefinitely with the same retry criteria
as retry-command.
error? is nonzero if an error occurred, zero otherwise.
NOTE no-data-command is a convenience function. It provides
no capabilities that are not present in retry-command, but for
those commands that meet its restrictions, it is easier to use.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
IEEE 1275-1994 Standard for Boot (Initialization Configuration)
Firmware: Core Requirements and Practices
E.3.2.2 Bus-specific methods for bus nodes
A package implementing the scsi-2 device type shall implement the
following bus-specific method:
set-address ( unit# target# -- )
Sets the SCSI target number (0x0..0xf) and unit number (0..7) to which
subsequent commands apply.
This function is for devices with #address-cells == 2
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Convert physical address to text unit-string.
Convert phys.lo ... phys-high, the numerical representation, to unit-string,
the text string representation of a physical address within the address
space defined by this device node. The number of cells in the list
phys.lo ... phys.hi is determined by the value of the #address-cells property
of this node.
This function is for devices with #address-cells == 4
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
decode-unit ( addr len -- phys.lo ... phys.hi )
Convert text unit-string to physical address.
Convert unit-string, the text string representation, to phys.lo ... phys.hi,
the numerical representation of a physical address within the address space
defined by this device node. The number of cells in the list
phys.lo ... phys.hi is determined by the value of the #address-cells
property of this node.
This function is for devices with #address-cells == 4
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Starting from binutils commit bd7ab16b4537788ad53521c45469a1bdae84ad4a:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=bd7ab16b4537788ad53521c45469a1bdae84ad4a
x86-64 assembler generates R_X86_64_PLT32, instead of R_X86_64_PC32, for
32-bit PC-relative branches. Grub2 should treat R_X86_64_PLT32 as
R_X86_64_PC32.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On efi systems, make pmtimer based tsc calibration the default over the
pit. This prevents Grub from hanging on Intel SoC systems that power gate
the pit.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When we exit grub, we don't free all the memory that we allocated earlier
for our heap region. This can cause problems with setups where you try
to descend the boot order using "exit" entries, such as PXE -> HD boot
scenarios.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The reboot function calls machine_fini() and then reboots the system.
Currently it lives in lib/ which means it gets compiled into the
reboot module which lives on the heap.
In a following patch, I want to free the heap on machine_fini()
though, so we would free the memory that the code is running in. That
obviously breaks with smarter UEFI implementations.
So this patch moves it into the core. That way we ensure that all
code running after machine_fini() in the UEFI case is running from
memory that got allocated (and gets deallocated) by the UEFI core.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
With upcoming changes to EDK2, allocations of type EFI_LOADER_DATA may
not return regions with execute ability. Since modules are loaded onto
the heap, change the heap allocation type to GRUB_EFI_LOADER_CODE in
order to permit execution on systems with this feature enabled.
Closes: 50420
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
grub_efi_allocate_pages Essentially does 2 unrelated things:
* Allocate at fixed address.
* Allocate at any address.
To switch between 2 different functions it uses address == 0 as magic
value which is wrong as 0 is a perfectly valid fixed adress to allocate at.
Expose a new function, grub_efi_allocate_pages_real(), making it possible
to specify allocation type and memory type as supported by the UEFI
AllocatePages boot service.
Make grub_efi_allocate_pages() a consumer of the new function,
maintaining its old functionality.
Also delete some left-around #if 1/#else blocks in the affected
functions.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
UEFI 2.6 9.3.6.4 File Path Media Device Path says that Path Name is
"A NULL-terminated Path string including directory and file names".
Strip final NULL from Path Name in each File Path node when constructing
full path. To be on safe side, strip all of them.
Fixes failure chainloading grub from grub, when loaded grub truncates
image path and does not find its grub.cfg.
https://bugzilla.opensuse.org/show_bug.cgi?id=1026344
This was triggered by commit ce95549cc54b5d6f494608a7c390dba3aab4fba7;
before it we built Path Name without trailing NULL, and apparently all
other bootloaders use single File Path node, thus not exposing this bug.
According to EABI only STT_FUNC has convention of lowest bit indicating
execution mode. R_THM_{JUMP,CALL}* relocations are assumed to be pointing
to thumb mode unless they use STT_FUNC.
