* kern/ieee1275/init.c (grub_machine_set_prefix): If `grub_prefix'
is non-empty, use it to set the `prefix' environment variable instead
of the usual approach.
* kern/i386/linuxbios/init.c (make_install_device): Remove function.
(grub_machine_set_prefix): Use `grub_prefix' to set the `prefix'
environment variable instead of dummy make_install_device().
* kern/i386/ieee1275/startup.S: Include `<grub/machine/kernel.h>'.
(start): Insert a data section, with `grub_prefix' variable.
* kern/i386/linuxbios/startup.S: Likewise.
* include/grub/powerpc/ieee1275/kernel.h [!ASM_FILE] (grub_prefix):
New variable reference.
* include/grub/i386/ieee1275/kernel.h (GRUB_KERNEL_MACHINE_PREFIX):
New macro. Defines offset of `grub_prefix' within startup.S (relative
to `start').
(GRUB_KERNEL_MACHINE_DATA_END): New macro. Defines the end of data
section within startup.S (relative to `start').
* include/grub/i386/coreboot/kernel.h: Likewise.
* util/elf/grub-mkimage.c (add_segments): Receive `prefix' parameter.
Overwrite grub_prefix with its contents, at the beginning of the
first segment.
(main): Understand -p|--prefix.
* kern/i386/linuxbios/init.c (grub_machine_init): Cast addr to
grub_addr_t before casting it to the void pointer to fix a
warning. Non-addressable regions are discarded earlier.
(grub_arch_modules_addr): Cast _end to grub_addr_t.
* kern/i386/linuxbios/table.c: Include grub/misc.h.
(check_signature): Don't shadow table_header.
(grub_linuxbios_table_iterate): Cast numeric constants to
grub_linuxbios_table_header_t.
* include/grub/i386/linuxbios/init.h: Add noreturn attribute to
grub_stop().
* util/i386/pc/grub-mkimage.c (generate_image): If we included a drive
in our prefix, set install_{dos,bsd}_part = -2 to indicate this can be
skipped later.
(main): If a memdisk was requested, add "(memdisk)" drive explicitly to
the beginning of the prefix.
* kern/i386/pc/init.c (make_install_device): Remove memdisk check.
It is assumed that if we have a memdisk, grub-mkimage has set
grub_prefix to include the "(memdisk)" drive in it.
Ensure GRUB_KERNEL_MACHINE_DATA_END is always consistent with the
rest of GRUB, and breakage doesn't happen if its value were modified.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_RAW_SIZE):
Redefine as an offset from `GRUB_KERNEL_MACHINE_DATA_END' instead of
a constant (same value).
* kern/i386/pc/startup.S: Replace hardcoded `0x50' with
`GRUB_KERNEL_MACHINE_DATA_END' (same value).
Restructures early code path on ieee1275 to unify grub_main() as
the first C function that is executed in every platform.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_init): New prototype.
* kern/i386/ieee1275/startup.S (_start): Jump to grub_main() instead of
cmain().
* kern/powerpc/ieee1275/crt0.S (_start): Likewise.
* kern/ieee1275/cmain.c (cmain): Rename to ...
* kern/ieee1275/cmain.c (grub_ieee1275_init): ... this.
* kern/ieee1275/init.c (grub_machine_init): Call grub_ieee1275_init()
at the beginning.
* kern/i386/pc/startup.S (real_to_prot): Use %cs prefix to load
GDT. This is more robust, as %ds can change.
(grub_biosdisk_rw_int13_extensions): Don't clear %ds before
calling real_to_prot().
(grub_biosdisk_get_diskinfo_int13_extensions): Likewise.
* kern/i386/pc/startup.S: Assert that uncompressed functions
don't spill beyond GRUB_KERNEL_MACHINE_RAW_SIZE.
* kern/i386/pc/lzo1x.S: Remove all .align directives in the
code, as they push parts of the code (error handlers) beyond
GRUB_KERNEL_MACHINE_RAW_SIZE. Speed is not as important in this
code as correctness and size.
* kern/i386/pc/startup.S
(grub_biosdisk_get_diskinfo_int13_extensions): When converting
data block address to the real mode, keep offset minimal. This
works around a bug in AWARD BIOS on old Athlon systems, which
makes CD detection hang.
* conf/i386-pc.rmk (pkglib_MODULES): Add aout.mod _bsd.mod and bsd.mod.
(aout_mod_SOURCES): New variable.
(aout_mod_CFLAGS): Likewise.
(aout_mod_LDFLAGS): Likewise.
(_bsd_mod_SOURCES): New variable.
(_bsd_mod_CFLAGS): Likewise.
(_bsd_mod_LDFLAGS): Likewise.
(bsd_mod_SOURCES): New variable.
(bsd_mod_CFLAGS): Likewise.
(bsd_mod_LDFLAGS): Likewise.
* include/grub/aout.h: New file.
* include/grub/i386/loader.h (grub_unix_real_boot): New function.
* include/grub/i386/bsd.h: New file.
* include/grub/i386/pc/init.h (grub_get_mmap_entry): Use EXPORT_FUNC
to make it public.
* kern/elf.c (grub_elf32_load): Get the physical address after the hook
function is called, so that it's possible to change it inside the hook.
(grub_elf64_load): Likewise.
(grub_elf_file): Don't close the file if elf header is not found.
(grub_elf_close): Close the file if grub_elf_file fails (The new
grub_elf_file won't close it).
(grub_elf32_size): Use NESTED_FUNC_ATTR for nested function calcsize.
(grub_elf64_size): Likewise.
* kern/i386/loader.S (grub_unix_real_boot): New function.
* loader/aout.c: New file.
* loader/i386/bsd.c: New file.
* loader/i386/bsd_normal.c: New file.
* loader/i386/pc/multiboot.c (grub_multiboot): Handle a.out format.
* loader/multiboot2.c (grub_multiboot2): Reset grub_errno so that it
can test othe formats.
* include/grub/term.h (GRUB_TERM_LEFT, GRUB_TERM_RIGHT)
(GRUB_TERM_UP, GRUB_TERM_DOWN, GRUB_TERM_HOME, GRUB_TERM_END)
(GRUB_TERM_DC, GRUB_TERM_PPAGE, GRUB_TERM_NPAGE, GRUB_TERM_ESC)
(GRUB_TERM_TAB, GRUB_TERM_BACKSPACE): New macros.
* kern/i386/pc/startup.S: Include `<grub/term.h>'.
(translation_table): Replace hardcoded values with macros
provided by `<grub/term.h>'.
* term/i386/pc/at_keyboard.c: Include `<grub/term.h>'.
(keyboard_map): Correct/add a few values, with macros provided
by `<grub/term.h>'.
(keyboard_map_shift): Zero values that don't differ from their
`keyboard_map' equivalents.
(grub_console_checkkey): Optimize KEYBOARD_STATUS_CAPS_LOCK toggling.
Discard the second scan code that is always sent by Caps lock.
Only use `keyboard_map_shift' when it provides a non-zero value,
otherwise fallback to `keyboard_map'.
Add support for having a grub directory in a different drive. This
is still only the data handling part.
* kern/i386/pc/startup.S (multiboot_trampoline): Set %dh to 0xFF.
(codestart): Save %dh in GRUB_ROOT_DRIVE.
(grub_root_drive): New variable.
* kern/i386/pc/init.c (make_install_device): Use GRUB_ROOT_DRIVE
instead of GRUB_BOOT_DRIVE to construct a device name. Set
GRUB_ROOT_DRIVE to GRUB_BOOT_DRIVE if it is 0xFF, otherwise use it
as it was.
* include/grub/i386/pc/kernel.h (grub_root_drive): New prototype.
* include/grub/i386/pc/boot.h (GRUB_BOOT_MACHINE_ROOT_DRIVE): New
macro.
(GRUB_BOOT_MACHINE_DRIVE_CHECK): Set to 0x4f.
* boot/i386/pc/pxeboot.S (_start): Set %dh to 0xFF. For now, this
is bogus, because PXE booting does not specify any drive
correctly.
* boot/i386/pc/lnxboot.S (reg_edx): Set the second byte to 0xFF. I
am not sure if this is really correct.
* boot/i386/pc/cdboot.S: Set %dh to 0xFF, because the root drive
is always identical to the boot drive when booting from a CD.
* boot/i386/pc/boot.S (MOV_MEM_TO_AL): Removed. Not needed any
longer.
(root_drive): New variable.
(real_start): Unconditionally set %dh to ROOT_DRIVE.
(setup_sectors): Push %dx right after popping it, because %dh will
be modified later.
(copy_buffer): Restore %dx.
* a/kern/i386/pc/startup.S (grub_chainloader_real_boot): Pop
%edx and %esi from stack only after grub_gate_a20() is called.
grub_gate_a20() clobbers %edx.
* conf/i386-pc.rmk (pkglib_IMAGES): Add cdboot.img.
(cdboot_img_SOURCES): New variable.
(cdboot_img_ASFLAGS): New variable.
(cdboot_img_LDFLAGS): New variable.
* boot/i386/pc/cdboot.S: New file.
* disk/i386/pc/biosdisk.c (cd_start): New variable.
(cd_count): Likewise.
(grub_biosdisk_get_drive): Add support for cd device.
(grub_biosdisk_call_hook): Likewise.
(grub_biosdisk_iterate): Likewise.
(grub_biosdisk_open): Likewise.
(GRUB_BIOSDISK_CDROM_RETRY_COUNT): New macro.
(grub_biosdisk_rw): Support reading from cd device.
(GRUB_MOD_INIT): Iterate cd devices.
* include/grub/i386/pc/biosdisk.h (GRUB_BIOSDISK_FLAG_CDROM): New macro.
(GRUB_BIOSDISK_MACHINE_CDROM_START): Likewise.
(GRUB_BIOSDISK_MACHINE_CDROM_END): Likewise.
* kern/i386/pc/init.c (make_install_device): Check for cd device.
* kern/i386/pc/init.c (make_install_device): When memdisk image is
present, "(memdisk)/boot/grub" becomes the default prefix.
* util/i386/pc/grub-mkrescue.in: Switch to a minimal core.img plus
a memdisk tarball with all the modules. Add --overlay=DIR option that
allows users to overlay additional files into the image.
* conf/i386-ieee1275.rmk (kernel_elf_SOURCES): Add `machine/loader.h'
and `machine/memory.h'.
(pkglib_MODULES): Add `multiboot.mod' and `_multiboot.mod'.
(_multiboot_mod_SOURCES): New variable.
(_multiboot_mod_CFLAGS): Likewise.
(_multiboot_mod_LDFLAGS): Likewise.
(multiboot_mod_SOURCES): Likewise.
(multiboot_mod_CFLAGS): Likewise.
(multiboot_mod_LDFLAGS): Likewise.
* include/grub/i386/ieee1275/loader.h: New file.
* include/grub/i386/ieee1275/machine.h: Likewise.
* include/grub/i386/ieee1275/memory.h: Likewise.
* include/grub/i386/pc/init.h (grub_os_area_addr): Remove (redundant)
variable declaration.
(grub_os_area_size): Likewise.
* kern/i386/ieee1275/init.c (grub_os_area_addr, grub_os_area_size)
(grub_lower_mem, grub_upper_mem): New variables.
(grub_stop_floppy): New function (just to make
grub_multiboot2_real_boot() happy).
* kern/i386/ieee1275/startup.S: Include `<grub/machine/memory.h>',
`<grub/cpu/linux.h>', `<multiboot.h>' and `<multiboot2.h>'.
(grub_stop): New function.
Include `"../realmode.S"' and `"../loader.S"'.
* loader/multiboot_loader.c: Include `<grub/machine/machine.h>'.
Replace `__i386__' #ifdefs with `GRUB_MACHINE_PCBIOS'.
* loader/powerpc/ieee1275/multiboot2.c (grub_mb2_arch_boot): On i386,
rely on grub_multiboot2_real_boot() for final boot.
* conf/i386-pc.rmk (kernel_img_HEADERS): Add `machine/kernel.h'.
(pkglib_MODULES): Add `memdisk.mod'.
(memdisk_mod_SOURCES): New variable.
(memdisk_mod_CFLAGS): Likewise.
(memdisk_mod_LDFLAGS): Likewise.
* disk/memdisk.c: New file.
* include/grub/disk.h (grub_disk_dev_id): Add
`GRUB_DISK_DEVICE_MEMDISK_ID'.
* include/grub/i386/pc/kernel.h
(GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE): New macro.
(GRUB_KERNEL_MACHINE_PREFIX): Increment by 4.
(grub_kernel_image_size): New variable declaration.
(grub_total_module_size): Likewise.
(grub_memdisk_image_size): Likewise.
* include/grub/i386/pc/memory.h
(GRUB_MEMORY_MACHINE_DECOMPRESSION_ADDR): New macro.
* include/grub/kernel.h: Include `<grub/symbol.h>'.
(grub_arch_memdisk_addr): New variable declaration.
(grub_arch_memdisk_size): Likewise.
* kern/i386/pc/init.c (grub_arch_memdisk_addr): New function.
(grub_arch_memdisk_size): Likewise.
* kern/i386/pc/startup.S (grub_memdisk_image_size): New variable.
(codestart): Replace hardcoded `0x100000' with
`GRUB_MEMORY_MACHINE_DECOMPRESSION_ADDR' macro.
* util/i386/pc/grub-mkimage.c: Include `<grub/misc.h>'.
(generate_image): Add `memdisk_path' parameter. When `memdisk_path' is
not NULL, append the contents of the file it refers to, at the end of
the compressed kernel image. Initialize `grub_memdisk_image_size'
variable (at `GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE' offset).
(options): Add "memdisk"|'m' option.
(main): Parse --memdisk|-m option, and pass user-provided path as
parameter to generate_image().
PowerPC changes provided by Pavel Roskin.
* kern/powerpc/ieee1275/cmain.c (cmain): Don't take any arguments.
* kern/powerpc/ieee1275/crt0.S: Store r5 in grub_ieee1275_entry_fn,
don't rely on cmain() doing it.
* kern/i386/ieee1275/startup.S (_start): Store %eax in
grub_ieee1275_entry_fn, don't rely on cmain() doing it.
* include/grub/i386/linuxbios/memory.h
(GRUB_MEMORY_MACHINE_LINUXBIOS_TABLE_ADDR): Remove macro.
* kern/i386/linuxbios/table.c (grub_linuxbios_table_iterate): Do not
receive `table_header' as argument. Instead, probe for it in the
known memory ranges where it can be present.
(grub_available_iterate): Do not pass a fixed `table_header' address
to grub_linuxbios_table_iterate().
* kern/i386/linuxbios/init.c: Put "void" to all function
declarations with no arguments.
* kern/powerpc/ieee1275/init.c: Likewise.
* term/i386/pc/at_keyboard.c: Likewise.
* term/i386/pc/vga_text.c: Likewise.
* util/grub-mkdevicemap.c: Likewise.
* kern/i386/loader.S: New file.
* kern/i386/pc/startup.S (grub_linux_prot_size): Moved from here ...
* kern/i386/loader.S (grub_linux_prot_size)... to here.
* kern/i386/pc/startup.S (grub_linux_tmp_addr): Moved from here ...
* kern/i386/loader.S (grub_linux_tmp_addr)... to here.
* kern/i386/pc/startup.S (grub_linux_real_addr): Moved from here ...
* kern/i386/loader.S (grub_linux_real_addr)... to here.
* kern/i386/pc/startup.S (grub_linux_boot_zimage): Moved from here ...
* kern/i386/loader.S (grub_linux_boot_zimage)... to here.
* kern/i386/pc/startup.S (grub_linux_boot_bzimage): Moved from here ...
* kern/i386/loader.S (grub_linux_boot_bzimage)... to here.
* kern/i386/pc/startup.S (grub_multiboot_real_boot): Moved from here ...
* kern/i386/loader.S (grub_multiboot_real_boot)... to here.
* kern/i386/pc/startup.S (grub_multiboot2_real_boot): Moved from here ...
* kern/i386/loader.S (grub_multiboot2_real_boot)... to here.
* kern/i386/realmode.S: New file.
* kern/i386/pc/startup.S (protstack): Moved from here ...
* kern/i386/realmode.S (protstack)... to here.
* kern/i386/pc/startup.S (gdt): Moved from here ...
* kern/i386/realmode.S (gdt)... to here.
* kern/i386/pc/startup.S (prot_to_real): Moved from here ...
* kern/i386/realmode.S (prot_to_real)... to here.
* kern/i386/pc/startup.S: Include `kern/i386/loader.S' and
`kern/i386/realmode.S'.
for powerpc & i386-pc. This patch was more so started by Hollis
Blanchard getting multiboot 2 working for powerpc and I added to it
and cleaned it up.
One of the ideas with this patch is to keep everything under one
command for the user. So instead of having a "multiboot2" & "module2"
command, I created a proxy like mechanism so that you have only one
command for both multiboot 1 & 2 ... "multiboot". This is where
"loader/multiboot_loader.c" comes from. I could have integrated things
more but I figure the current approach will less likely break
anything.
So if your OS is multiboot 2 capable, the user would do the following
to load it up from a grub prompt:
grub> multiboot <location of kernel> <kernel args>
grub> module <some image> <multiboot tag> <image arguments>
grub> module <isome mage> <multiboot tag> <image arguments>
grub .....
The other thing that this patch does is it begins to make the
multiboot 1 code a bit more architecture agnostic so IF someone wanted
to implement it on another architecture they can.
A bit of file moving around and definition renaming is also apart of
this patch. I have also taken the time to make sure that it does not
break multiboot 1 loading on i386-pc. But mulitboot 2 may still need a
little more testing and work for i386-pc. Powerpc multiboot 2 has been
heavily tested and does work.
* include/grub/i386/pc/kernel.h: Define GRUB_KERNEL_MACHINE_DATA_END to
indicate end of data section in kernel image.
* include/grub/i386/efi/kernel.h: Define GRUB_KERNEL_MACHINE_PREFIX and
GRUB_KERNEL_MACHINE_DATA_END.
* kern/i386/pc/startup.S: Do not initialize grub_prefix, only reserve
space for it.
* kern/i386/efi/startup.S: Likewise.
* util/i386/pc/grub-mkimage.c: Initialize grub_prefix to /boot/grub
during image generation. Implement --prefix option to override this
patch.
* util/i386/efi/grub-mkimage.c: Likewise.
* util/update-grub_lib.in (convert_system_path_to_grub_path): Split
code to make path relative to its root into a separate function.
* util/i386/pc/grub-install.in: Use newly provided
make_system_path_relative_to_its_root() to convert ${grubdir}, then
pass the result to grub-install --prefix.
* DISTLIST: Added commands/echo.c, disk/lvm.c, disk/raid.c,
include/grub/bitmap.h, include/grub/lvm.h, include/grub/raid.h,
include/grub/i386/pc/vbeutil.h, include/grub/util/lvm.h,
include/grub/util/raid.h, util/lvm.c, util/raid.c, video/bitmap.c,
video/readers/tga.c and video/i386/pc/vbeutil.c.
2006-10-14 Jeroen Dekkers <jeroen@dekkers.cx>
Added support for RAID and LVM.
* disk/lvm.c: New file.
* disk/raid.c: Likewise.
* include/grub/lvm.h: Likewise.
* include/grub/raid.h: Likewise.
* include/grub/util/lvm.h: Likewise.
* include/grub/util/raid.h: Likewise.
* util/lvm.c: Likewise.
* util/raid.c: Likewise.
* include/grub/disk.h (grub_disk_dev_id): Add
GRUB_DISK_DEVICE_RAID_ID and GRUB_DISK_DEVICE_LVM_ID.
(grub_disk_get_size): New prototype.
* kern/disk.c (grub_disk_open): Check whether grub_partition_probe()
returns a partition.
(grub_disk_get_size): New function.
* kern/i386/pc/init.c (make_install_device): Copy the prefix
verbatim if grub_install_dos_part is -2.
* util/i386/pc/getroot.c (grub_guess_root_device): Support RAID
and LVM devices.
* util/i386/pc/grub-setup.c (setup): New argument
MUST_EMBED. Force embedding of GRUB when the argument is
true. Close FILE before returning.
(main): Add support for RAID and LVM.
* conf/common.rmk: Add RAID and LVM modules.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add util/raid.c and
util/lvm.c.
(grub_emu_SOURCES): Add disk/raid.c and disk/lvm.c.
* kern/misc.c (grub_strstr): New function.
* include/grub/misc.h (grub_strstr): New prototype.
Count partitions from 1 instead of 0 in the string representation
of partitions. Still use 0-based internally.
* partmap/sun.c (grub_sun_is_valid): A cosmetic change.
(sun_partition_map_iterate): Use grub_partition_t instead of
struct grub_partition *. Cast DESC->START_CYLINDER to
grub_uint64_t after converting the endian.
(sun_partition_map_probe): Subtract 1 for PARTNUM.
(sun_partition_map_get_name): Add 1 to P->INDEX.
* partmap/pc.c (grub_partition_parse): Subtract 1 for
PCDATA->DOS_PART.
(pc_partition_map_get_name): Add 1 into PCDATA->DOS_PART.
* partmap/gpt.c (gpt_partition_map_iterate): Initialize PARTNO to
zero instead of one.
(gpt_partition_map_probe): Subtract 1 for PARTNUM.
(gpt_partition_map_get_name): Add 1 into P->INDEX.
* partmap/apple.c (apple_partition_map_iterate): Change the type
of POS to unsigned.
(apple_partition_map_probe): Subtract 1 for PARTNUM.
(apple_partition_map_get_name): Add 1 into P->INDEX.
* partmap/amiga.c (amiga_partition_map_iterate): Change the type
of POS to unsigned.
(amiga_partition_map_iterate): Cast NEXT to grub_off_t to
calculate the offset of a partition.
(amiga_partition_map_probe): Subtract 1 for PARTNUM.
(amiga_partition_map_get_name): Add 1 into P->INDEX.
* partmap/acorn.c (acorn_partition_map_find): Change the type of
SECTOR to grub_disk_addr_t.
(acorn_partition_map_iterate): Likewise.
(acorn_partition_map_probe): Subtract 1 for PARTNUM.
Change the type of SECTOR to grub_disk_addr_t. Declare P on the
top.
(acorn_partition_map_get_name): Add 1 into P->INDEX.
* kern/i386/pc/init.c (make_install_device): Add 1 into
GRUB_INSTALL_DOS_PART.
* fs/iso9660.c (grub_iso9660_mount): Fixed a reversed
conditional.
* kern/i386/pc/startup.S: Include grub/cpu/linux.h instead of
grub/machine/linux.h
* loader/i386/pc/linux.c: Likewise.
* include/grub/i386/pc/linux.h: Moved to ...
* include/grub/i386/linux.h: ... here.
* include/grub/i386/linux.h (struct linux_kernel_params): New
struct.
A new machine-specific function "grub_machine_set_prefix" is
defined. This is called after loading modules, so that a prefix
initialization can use modules. Also, this change adds an
intensive debugging feature for the memory manager via the
configure option "--enable-mm-debug".
* partmap/gpt.c (gpt_partition_map_iterate): Add one more into
PART.LEN.
* kern/sparc64/ieee1275/init.c (abort): Removed.
(grub_stop): Likewise.
(grub_exit): New function.
(grub_set_prefix): Renamed to ...
(grub_machine_set_prefix): ... this.
(grub_machine_init): Do not call grub_set_prefix.
* kern/powerpc/ieee1275/init.c (grub_set_prefix): Renamed to ...
(grub_machine_set_prefix): ... this.
(grub_machine_init): Do not call grub_set_prefix.
* kern/i386/pc/init.c (grub_machine_set_prefix): New function.
(grub_machine_init): Do not set the prefix here.
* kern/i386/efi/init.c (grub_machine_set_prefix): New function.
* kern/efi/init.c: Include grub/mm.h.
(grub_efi_set_prefix): New function.
* kern/efi/efi.c (grub_exit): Call grub_efi_fini.
(grub_efi_get_filename): New function.
(grub_print_device_path): Renamed to ...
(grub_efi_print_device_path): ... this.
* kern/mm.c [MM_DEBUG] (grub_malloc): Undefined.
[MM_DEBUG] (grub_realloc): Likewise.
[MM_DEBUG] (grub_free): Likewise.
[MM_DEBUG] (grub_memalign): Likewise.
[MM_DEBUG] (grub_mm_debug): New variable.
[MM_DEBUG] (grub_debug_malloc): New function.
[MM_DEBUG] (grub_debug_free): New function.
[MM_DEBUG] (grub_debug_realloc): New function.
[MM_DEBUG] (grub_debug_memalign): New function.
* kern/misc.c (grub_abort): Print a newline to distinguish
the message.
* kern/main.c (grub_main): Call grub_machine_set_prefix and
grub_set_root_dev after loading modules. This is necessary when
setting a prefix depends on modules.
* include/grub/efi/efi.h (grub_print_device_path): Renamed to ...
(grub_efi_print_device_path): ... this.
(grub_efi_get_filename): New prototype.
(grub_efi_set_prefix): Likewise.
* include/grub/efi/disk.h: Include grub/efi/api.h, grub/symbol.h
and grub/disk.h.
(grub_efidisk_get_device_handle): New prototype.
(grub_efidisk_get_device_name): Likewise.
* include/grub/mm.h: Include config.h.
(MM_DEBUG): Removed.
[MM_DEBUG && !GRUB_UTIL] (grub_mm_debug): New prototype.
[MM_DEBUG && !GRUB_UTIL] (grub_malloc): New macro.
[MM_DEBUG && !GRUB_UTIL] (grub_realloc): Likewise.
[MM_DEBUG && !GRUB_UTIL] (grub_memalign): Likewise.
[MM_DEBUG && !GRUB_UTIL] (grub_free): Likewise.
[MM_DEBUG && !GRUB_UTIL] (grub_debug_malloc): New prototype.
[MM_DEBUG && !GRUB_UTIL] (grub_debug_realloc): New prototype.
[MM_DEBUG && !GRUB_UTIL] (grub_debug_memalign): New prototype.
[MM_DEBUG && !GRUB_UTIL] (grub_debug_free): New prototype.
* include/grub/kernel.h (grub_machine_set_prefix): New prototype.
* disk/efi/efidisk.c: Include grub/partition.h.
(iterate_child_devices): New function.
(add_device): First, compare only last device path nodes, so that
devices are sorted by the types.
(grub_efidisk_get_device_handle): New function.
(grub_efidisk_get_device_name): Likewise.
* configure.ac (--enable-mm-debug): New option to enable the
memory manager debugging feature. This makes the binary much
bigger, so is disabled by default.
Use grub_abort instead of grub_stop, and grub_exit must be
define in each architecture now. Also, this change adds support
for EFI disks.
* util/i386/pc/grub-probefs.c: Include grub/term.h.
(grub_getkey): New function.
(grub_term_get_current): Likewise.
* util/i386/pc/grub-setup.c: Include grub/term.h.
(grub_getkey): New function.
(grub_term_get_current): Likewise.
* util/misc.c (grub_stop): Renamed to ...
(grub_exit): ... this.
* kern/powerpc/ieee1275/init.c (abort): Renamed to ...
(grub_exit): ... this.
(grub_machine_init): Use grub_abort instead of abort.
(grub_stop): Removed.
* kern/powerpc/ieee1275/cmain.c (cmain): Use grub_abort instead of
abort.
* kern/i386/pc/startup.S (grub_exit): New function.
(cold_reboot): New label.
* kern/efi/init.c: Include grub/efi/disk.h and grub/env.h.
(grub_efi_init): Call grub_efidisk_init.
(grub_efi_fini): Call grub_efidisk_fini.
* kern/efi/efi.c: Include grub/mm.h.
(grub_efi_console_control_guid): Renamed to ...
(console_control_guid): ... this.
(grub_efi_loaded_image_guid): Renamed to ...
(loaded_image_guid): ... this.
(grub_efi_locate_handle): New function.
(grub_efi_open_protocol): Likewise.
(grub_efi_set_text_mode): Use CONSOLE_CONTROL_GUID instead of
GRUB_EFI_CONSOLE_CONTROL_GUID.
(grub_efi_exit): Removed.
(grub_stop): Likewise.
(grub_efi_get_loaded_image): Use grub_efi_open_protocol.
(grub_exit): New function.
(grub_print_device_path): Likewise.
* kern/rescue.c (grub_rescue_cmd_exit): New function.
(grub_enter_rescue_mode): Register "exit".
* kern/misc.c (grub_real_dprintf): A cosmetic change.
(grub_abort): New function.
* kern/err.c (grub_fatal): Use grub_abort instead of grub_stop.
* include/grub/sparc64/ieee1275/kernel.h (abort): Removed.
* include/grub/powerpc/ieee1275/kernel.h (abort): Removed.
* include/grub/efi/efi.h (grub_efi_exit): Removed.
(grub_print_device_path): New prototype.
(grub_efi_locate_handle): Likewise.
(grub_efi_open_protocol): Likewise.
* include/grub/efi/disk.h (grub_efidisk_fini): New file.
* disk/efi/efidisk.c: Likewise.
* DISTLIST: Added disk/efi/efidisk.c and include/grub/efi/disk.h.
* include/grub/efi/console_control.h
(GRUB_EFI_CONSOLE_CONTROL_GUID): Use an array for the last 8 bytes.
* include/grub/efi/api.h (GRUB_EFI_LOADED_IMAGE_GUID): Specify the
last 8 bytes as an array.
(GRUB_EFI_DISK_IO_GUID): New macro.
(GRUB_EFI_BLOCK_IO_GUID): Likewise.
(GRUB_EFI_DEVICE_PATH_GUID): Likewise.
(grub_efi_ipv6_address_t): Change the type to grub_uint16_t from
grub_uint8_t.
(struct grub_efi_guid): Use an array to specify the last 8 bytes.
(struct grub_efi_device_path): Rename the member "sub_type" to
"subtype".
(GRUB_EFI_DEVICE_PATH_TYPE): New macro.
(GRUB_EFI_DEVICE_PATH_SUBTYPE): Likewise.
(GRUB_EFI_DEVICE_PATH_LENGTH): Likewise.
(GRUB_EFI_END_DEVICE_PATH_TYPE): Likewise.
(GRUB_EFI_END_ENTIRE_DEVICE_PATH_SUBTYPE): Likewise.
(GRUB_EFI_END_THIS_DEVICE_PATH_SUBTYPE): Likewise.
(GRUB_EFI_END_ENTIRE_DEVICE_PATH): Likewise.
(GRUB_EFI_NEXT_DEVICE_PATH): Likewise.
(GRUB_EFI_HARDWARE_DEVICE_PATH_TYPE): Likewise.
(GRUB_EFI_PCI_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_pci_device_path): New structure.
(grub_efi_pci_device_path_t): New type.
(GRUB_EFI_PCCARD_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_pccard_device_path): New structure.
(grub_efi_pccard_device_path_t): New type.
(GRUB_EFI_MEMORY_MAPPED_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_memory_mapped_device_path): New structure.
(grub_efi_memory_mapped_device_path_t): New type.
(GRUB_EFI_VENDOR_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_vendor_device_path): New structure.
(grub_efi_vendor_device_path_t): New type.
(GRUB_EFI_CONTROLLER_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_controller_device_path): New structure.
(grub_efi_controller_device_path_t): New type.
(GRUB_EFI_ACPI_DEVICE_PATH_TYPE): New macro.
(GRUB_EFI_ACPI_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_acpi_device_path): New structure.
(grub_efi_acpi_device_path_t): New type.
(GRUB_EFI_EXPANDED_ACPI_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_expanded_acpi_device_path): New structure.
(grub_efi_expanded_acpi_device_path_t): New type.
(GRUB_EFI_EXPANDED_ACPI_HIDSTR): New macro.
(GRUB_EFI_EXPANDED_ACPI_UIDSTR): Likewise.
(GRUB_EFI_EXPANDED_ACPI_CIDSTR): Likewise.
(GRUB_EFI_MESSAGING_DEVICE_PATH_TYPE): Likewise.
(GRUB_EFI_ATAPI_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_atapi_device_path): New structure.
(grub_efi_atapi_device_path_t): New type.
(GRUB_EFI_FIBRE_CHANNEL_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_fibre_channel_device_path): New structure.
(grub_efi_fibre_channel_device_path_t): New type.
(GRUB_EFI_1394_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_1394_device_path): New structure.
(grub_efi_1394_device_path_t): New type.
(GRUB_EFI_USB_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_usb_device_path): New structure.
(grub_efi_usb_device_path_t): New type.
(GRUB_EFI_USB_CLASS_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_usb_class_device_path): New structure.
(grub_efi_usb_class_device_path_t): New type.
(GRUB_EFI_I2O_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_i2o_device_path): New structure.
(grub_efi_i2o_device_path_t): New type.
(GRUB_EFI_MAC_ADDRESS_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_mac_address_device_path): New structure.
(grub_efi_mac_address_device_path_t): New type.
(GRUB_EFI_IPV4_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_ipv4_device_path): New structure.
(grub_efi_ipv4_device_path_t): New type.
(GRUB_EFI_IPV6_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_ipv6_device_path): New structure.
(grub_efi_ipv6_device_path_t): New type.
(GRUB_EFI_INFINIBAND_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_infiniband_device_path): New structure.
(grub_efi_infiniband_device_path_t): New type.
(GRUB_EFI_UART_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_uart_device_path): New structure.
(grub_efi_uart_device_path_t): New type.
(GRUB_EFI_VENDOR_MESSAGING_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_vendor_messaging_device_path): New structure.
(grub_efi_vendor_messaging_device_path_t): New type.
(GRUB_EFI_MEDIA_DEVICE_PATH_TYPE): New macro.
(GRUB_EFI_HARD_DRIVE_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_hard_drive_device_path): New structure.
(grub_efi_hard_drive_device_path_t): New type.
(GRUB_EFI_CDROM_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_cdrom_device_path): New structure.
(grub_efi_cdrom_device_path_t): New type.
(GRUB_EFI_VENDOR_MEDIA_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_vendor_media_device_path): New structure.
(grub_efi_vendor_media_device_path_t): New type.
(GRUB_EFI_FILE_PATH_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_file_path_device_path): New structure.
(grub_efi_file_path_device_path_t): New type.
(GRUB_EFI_PROTOCOL_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_protocol_device_path): New structure.
(grub_efi_protocol_device_path_t): New type.
(GRUB_EFI_BIOS_DEVICE_PATH_TYPE): New macro.
(GRUB_EFI_BIOS_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_bios_device_path): New structure.
(grub_efi_bios_device_path_t): New type.
(struct grub_efi_disk_io): New structure.
(grub_efi_disk_io_t): New type.
(struct grub_efi_block_io_media): New structure.
(grub_efi_block_io_media_t): New type.
(struct grub_efi_block_io): New structure.
(grub_efi_block_io_t): New type.
* include/grub/misc.h (grub_stop): Removed.
(grub_exit): New prototype.
(grub_abort): Likewise.
* include/grub/disk.h (enum grub_disk_dev_id): Added
GRUB_DISK_DEVICE_EFIDISK_ID.
* conf/i386-efi.rmk (kernel_mod_SOURCES): Added
disk/efi/efidisk.c.
(kernel_syms.lst): Remove the target if an error occurs.
Add support for pre-loaded modules into the EFI port.
* util/i386/efi/grub-mkimage.c (make_mods_section): Rewritten
completely. Accept one more argument DIR. The caller has changed.
* kern/i386/efi/init.c (grub_arch_modules_addr): Removed.
* kern/efi/efi.c: Include grub/efi/pe32.h and grub/kernel.h.
(grub_efi_loaded_image_guid): New variable.
(grub_efi_get_loaded_image): New function.
(grub_arch_modules_addr): Likewise.
* include/grub/efi/efi.h (grub_efi_get_loaded_image): New
prototype.
* include/grub/efi/api.h (GRUB_EFI_LOADED_IMAGE_GUID): New macro.
(struct grub_efi_loaded_image): New structure.
(grub_efi_loaded_image_t): New type.
* kern/file.c (grub_file_seek): Seeking to an offset equal to a
file size must be permitted.
* kern/i386/pc/startup.S (multiboot_trampoline): Fix a mistake
between %ah and %al.
Make GRUB's kernel compliant to Multiboot Specification.
* kern/i386/pc/startup.S (multiboot_header): New label.
(multiboot_entry): Likewise.
(multiboot_trampoline): Likewise.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_RAW_SIZE):
Increased to 0x4A0.
* fs/xfs.c (grub_xfs_iterate_dir): Fix a syntax error. You may not
put parentheses after a question mark.
[!GRUB_UTIL] (my_mod): New variable.
* util/grub-emu.c (main): Call grub_xfs_init and grub_xfs_fini.
* kern/i386/pc/startup.S (gate_a20_try_system_control_port_a):
When turning off Gate A20, skip the check and return immediately,
because this is not fatal usually.
* conf/i386-pc.rmk (pxeboot_img_LDFLAGS): The text address should
be 0x7C00 instead of 0x8000.
* boot/i386/pc/pxeboot.S: Rewritten.
* kern/i386/pc/startup.S (gate_a20_try_bios): No need to specify
EXT_C.
(gate_a20_check_state): Read a byte from 0x108000. Invert the
result.
* kern/i386/pc/startup.S (grub_gate_a20): Rewritten for
robustness. This routine now supports a BIOS call and System
Control Port A to modify the gate A20.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_RAW_SIZE):
Increased to 0x440.
* include/grub/normal.h (grub_halt_init): New prototype.
(grub_halt_fini): Likewise.
(grub_reboot_init): Likewise.
(grub_reboot_fini): Likewise.
* util/grub-emu.c: Include signal.h.
(main_env): New global variable.
(grub_machine_init): Ignore SIGINT. Otherwise grub-emu cannot
catch C-c.
(grub_machine_fini): New function.
(main): Call grub_halt_init and grub_reboot_init before
grub_main, and grub_reboot_fini and grub_halt_fini after it.
Call setjmp with MAIN_ENV to go back afterwards.
Call grub_machine_fini right before return.
* include/grub/util/misc.h: Include setjmp.h.
(main_env): New prototype.
* include/grub/kernel.h (grub_machine_fini): New prototype.
* include/grub/i386/pc/biosdisk.h (grub_biosdisk_fini): Likewise.
* include/grub/i386/pc/console.h (grub_console_fini): Likewise.
* disk/i386/pc/biosdisk.c (grub_biosdisk_fini): New function.
* kern/i386/pc/init.c (grub_machine_fini): Likewise.
* term/i386/pc/console.c (grub_console_fini): Likewise.
* util/i386/pc/misc.c: New file.
* conf/i386-pc.rmk (grub_emu_SOURCES): Added
util/i386/pc/misc.c, commands/i386/pc/halt.c and
commands/i386/pc/reboot.c.
* include/grub/dl.h (grub_dl_check_header): New prototype.
(grub_arch_dl_check_header): Change return type to grub_err_t,
remove size parameter and export function. Update all callers.
* kern/dl.c (grub_dl_check_header): New function.
(grub_dl_load_core): Use `grub_dl_check_header' instead of
`grub_arch_dl_check_header'. Check ELF type. Check if sections
are inside the core.
* kern/i386/dl.c (grub_arch_dl_check_header): Remove arch
independent ELF header checks.
* kern/powerpc/dl.c (grub_arch_dl_check_header): Likewise.
* loader/i386/pc/multiboot.c (grub_rescue_cmd_multiboot): Use
`grub_dl_check_header' instead of explicit checks. Check for the
ELF type.
* loader/powerpc/ieee1275/linux.c (grub_rescue_cmd_linux): Use
`grub_dl_check_header' instead of explicit checks. Remove arch
specific ELF header checks.
* include/grub/mm.h (grub_mm_init_region): Change the type of the
`unsigned' arguments to `grub_size_t'.
(grub_malloc): Likewise.
(grub_realloc): Likewise.
(grub_memalign): Likewise.
* kern/i386/dl.c (grub_arch_dl_check_header): Likewise.
* kern/powerpc/dl.c (grub_arch_dl_check_header): Likewise.
* util/misc.c (grub_malloc): Likewise.
(grub_realloc): Likewise.
* kern/mm.c (get_header_from_pointer): Change the casts to
`unsigned' into a cast to `grub_size_t'.
* fs/fshelp.c (grub_fshelp_find_file): The `oldnode' should always
point to `currnode' when `currnode' is changed.
* util/grub-emu.c (main): Initialize `progname'. Reported by Nico
Schottelius <nico-linux@schottelius.org>.
* genmk.rb: Handle the `Program' class in the main loop. Written
by Johan Rydberg <jrydberg@gnu.org>.
(Program): New class.
(programs): New variable.
* boot/powerpc/ieee1275/cmain.c: Include <grub/machine/ieee1275.h>
instead of "grub/machine/ieee1275.h". Include <grub/kernel.h>
instead of "grub/kernel.h". Include <grub/machine/init.h>.
(help_arch): Function removed.
* conf/powerpc-ieee1275.rmk (grubof_HEADERS): Add
`powerpc/libgcc.h' and `loader.h'.
(pkgdata_PROGRAMS): New variable.
(sbin_UTILITIES): Variable removed.
(grub_emu_SOURCES): Added kern/powerpc/cache.S.
(grubof_SOURCES): Variable re-defined so it only includes the
core functionality.
(grubof_CFLAGS): Remove `-DGRUBOF'.
(pkgdata_MODULES, fshelp_mod_SOURCES, fshelp_mod_CFLAGS,
(fat_mod_SOURCES, fat_mod_CFLAGS, ext2_mod_SOURCES)
(ext2_mod_CFLAGS, ufs_mod_SOURCES, ufs_mod_CFLAGS)
(minix_mod_SOURCES, minix_mod_CFLAGS, hfs_mod_SOURCES)
(hfs_mod_CFLAGS, jfs_mod_SOURCES, jfs_mod_CFLAGS)
(iso9660_mod_SOURCES, iso9660_mod_CFLAGS, _linux_mod_SOURCES)
(_linux_mod_CFLAGS, linux_mod_SOURCES, linux_mod_CFLAGS)
(normal_mod_SOURCES, normal_mod_CFLAGS, normal_mod_ASFLAGS)
(hello_mod_SOURCES, hello_mod_CFLAGS, boot_mod_SOURCES)
(boot_mod_CFLAGS, terminal_mod_SOURCES, terminal_mod_CFLAGS)
(ls_mod_SOURCES, ls_mod_CFLAGS, cmp_mod_SOURCES, cmp_mod_CFLAGS)
(cat_mod_SOURCES, cat_mod_CFLAGS, font_mod_SOURCES)
(font_mod_CFLAGS, amiga_mod_SOURCES, amiga_mod_CFLAGS)
(apple_mod_SOURCES, apple_mod_CFLAGS, pc_mod_SOURCES)
(pc_mod_CFLAGS): New variables.
* disk/powerpc/ieee1275/ofdisk.c: Include <grub/machine/init.h>.
(grub_ofdisk_iterate): Add a prototype for `dev_iterate'.
* include/grub/dl.h (grub_arch_dl_sync_caches): New prototype.
* include/grub/loader.h (grub_os_area_addr, grub_os_area_size):
Moved from here...
* include/grub/i386/pc/init.h (grub_os_area_addr)
(rub_os_area_size): ... to here.
* include/grub/powerpc/ieee1275/ieee1275.h
(grub_ieee1275_entry_fn): Export symbol.
* include/grub/powerpc/ieee1275/init.h: New file.
* include/grub/powerpc/libgcc.h: Likewise.
* include/grub/cache.h: Likewise.
* kern/powerpc/cache.S: Likewise. Written by Hollis Blanchard
<hollis@penguinppc.org>.
* kern/dl.c: Include <grub/cache.h>.
(grub_dl_flush_cache): New function.
(grub_dl_load_core): Call `grub_dl_flush_cache' to flush the cache
for this module.
* kern/powerpc/ieee1275/init.c (grub_ofdisk_init)
(grub_console_init): Removed prototypes.
(grub_machine_init): Don't initialize the modules anymore.
* kern/powerpc/ieee1275/openfw.c (grub_map): Make the function
static.
* include/grub/powerpc/types.h (GRUB_HOST_WORDS_LITTLEENDIAN):
Macro undef removed.
(GRUB_HOST_WORDS_BIGENDIAN): New macro.
* kern/powerpc/dl.c (grub_arch_dl_relocate_symbols): Add
relocation `R_PPC_REL32'. Return an error when the relocation is
unknown.
* Makefile.in (DATA): Add `$(pkgdata_PROGRAMS)'.
* kern/i386/pc/init.c (grub_arch_sync_caches): New function.
* util/misc.c (grub_arch_sync_caches): Likewise.
All symbols prefixed with PUPA_ and pupa_ are renamed to GRUB_
and grub_, respectively. Because the conversion is trivial and
mechanical, I omit the details here. Please refer to the CVS
if you need more information.
* commands/boot.c: New file.
* commands/cat.c: Likewise.
* commands/cmp.c: Likewise.
* commands/ls.c: Likewise.
* commands/terminal.c: Likewise.
* normal/command.c: Include <pupa/env.h> and <pupa/dl.h>.
(pupa_register_command): Changed interface to match the new
argument parser.
(pupa_command_execute): Changed (almost rewritten) so it uses
pupa_split_command. Added support for setting variables using the
syntax `foo=bar'.
(rescue_command): Changed to work with the new argument parser.
(terminal_command): Moved from here to commands/terminal.c.
(set_command): New function.
(unset_command): New function.
(insmod_command): New function.
(rmmod_command): New function.
(lsmod_command): New function.
(pupa_command_init): Don't initialize the command terminal
anymore. Initialize the commands set, unset, insmod, rmmod and
lsmod.
* conf/i386-pc.rmk (kernel_img_SOURCES): Add kern/env.c.
(kernel_img_HEADERS): Add arg.h and env.h.
(pupa_mkimage_LDFLAGS): Add kern/env.c.
(pupa_emu_SOURCES): Add kern/env.c, commands/ls.c,
commands/terminal.c commands/boot.c commands/cmp.c commands/cat.c,
normal/arg.c.
(pkgdata_MODULES): Add ls.mod, boot.mod, cmp.mod, cat.mod and
terminal.mod.
(normal_mod_SOURCES): Add normal/arg.c and normal/arg.c.
(boot_mod_SOURCES): New variable.
(terminal_mod_SOURCES): Likewise.
(ls_mod_SOURCES): Likewise.
(cmp_mod_SOURCES): Likewise.
(cat_mod_SOURCES): Likewise.
* normal/arg.c: New file.
* kern/env.c: Likewise.
* include/pupa/arg.h: Likewise.
* include/pupa/env.h: Likewise.
* font/manager.c (font_command): Changed to match argument parsing
interface changes.
(PUPA_MOD_INIT): Likewise.
* hello/hello.c (pupa_cmd_hello): Likewise.
(PUPA_MOD_INIT): Likewise.
* include/pupa/disk.h: Include <pupa/device.h>.
(pupa_print_partinfo): New prototype.
* include/pupa/dl.h (pupa_dl_set_prefix): Prototype removed.
(pupa_dl_get_prefix): Likewise.
* include/pupa/misc.h: Include <pupa/err.h>.
(pupa_isgraph): New prototype.
(pupa_isdigit): Likewise.
(pupa_split_cmdline): Likewise.
* include/pupa/normal.h: Include <pupa/arg.h>.
(pupa_command): Changed the prototype of the member `func' to
match the argument parsing interface. Added member `options'.
(pupa_register_command): Updated to match function.
(pupa_arg_parse): New prototype.
(pupa_hello_init) [PUPA_UTIL]: New prototype.
(pupa_hello_fini) [PUPA_UTIL]: Likewise.
(pupa_ls_init) [PUPA_UTIL]: Likewise.
(pupa_ls_fini) [PUPA_UTIL]: Likewise.
(pupa_cat_init) [PUPA_UTIL]: Likewise.
(pupa_cat_fini) [PUPA_UTIL]: Likewise.
(pupa_boot_init) [PUPA_UTIL]: Likewise.
(pupa_boot_fini) [PUPA_UTIL]: Likewise.
(pupa_cmp_init) [PUPA_UTIL]: Likewise.
(pupa_cmp_fini) [PUPA_UTIL]: Likewise.
(pupa_terminal_init) [PUPA_UTIL]: Likewise.
(pupa_terminal_fini) [PUPA_UTIL]: Likewise.
* kern/disk.c: Include <pupa/file.h>.
(pupa_print_partinfo): New function.
* kern/dl.c: Include <pupa/env.h>.
(pupa_dl_dir): Variable removed.
(pupa_dl_load): Use the environment variable `prefix' instead of
the variable pupa_dl_dir.
(pupa_dl_set_prefix): Function removed.
(pupa_dl_get_prefix): Likewise.
* kern/i386/pc/init.c: Include <pupa/env.h>.
(pupa_machine_init): Use the environment variable `prefix' instead of
using pupa_dl_set_prefix to set the prefix.
* kern/main.c: Include <pupa/env.h>.
(pupa_set_root_dev): Use the environment variable `prefix' instead of
using pupa_dl_get_prefix to get the prefix.
* kern/misc.c: Include <pupa/env.h>.
(pupa_isdigit): New function.
(pupa_isgraph): Likewise.
(pupa_ftoa): Likewise.
(pupa_vsprintf): Added support for printing values of the type
`double'. Make it possible to format variable output when using
formatting like `%1.2%f'.
(pupa_split_cmdline): New function.
* kern/rescue.c: Include <pupa/env.h>.
(next_word): Removed function.
(pupa_rescue_cmd_prefix): Likewise.
(pupa_rescue_cmd_set): New function.
(pupa_rescue_cmd_unset): New function.
(pupa_enter_rescue_mode): Use the `pupa_split_cmdline' function to
split the command line instead of splitting it here. Added
support for setting variables using the syntax `foo=bar'. Don't
initialize the prefix command anymore. Initialized the set and
unset commands.
* normal/cmdline.c: Include <pupa/env.h>.
(pupa_tab_complete): Added prototypes for print_simple_completion,
print_partition_completion, add_completion, iterate_commands,
iterate_dev, iterate_part and iterate_dir. Moved code to print
partition information from here to kern/disk.c.
(pupa_cmdline_run): Don't check if the funtion exists anymore.
* normal/main.c: Include <pupa/env.h>.
(pupa_rescue_cmd_normal): Use the environment variable `prefix'
instead of using pupa_dl_get_prefix to get the prefix.
* term/i386/pc/vga.c: Include <pupa/arg.h>.
(check_vga_mem): Cast pointers to `void *' to silence a gcc
warning.
(pupa_vga_putchar) [! DEBUG_VGA]: Removed for this case.
(pupa_vga_setcolor): Declare unused variables with `__attribute__
((unused))' to silence a gcc warning.
(pupa_vga_setcolor): Likewise.
(debug_command): Changed to match argument parsing
interface changes.
* util/pupa-emu.c: Include <pupa/env.h>.
(options): Added 0's for unused fields to silence a gcc warning.
(argp): Likewise.
(main): Use the environment variable `prefix' instead of using
pupa_dl_set_prefix to set the prefix. Initialize the commands ls,
boot, cmp, cat and terminal. Finish the commands boot, cmp, cat
and terminal.
* util/i386/pc/getroot.c: Include <pupa/i386/pc/util/biosdisk.h>.
* util/misc.c: Include <malloc.h>.
(pupa_malloc): Rewritten so errors are correctly reported.
(pupa_realloc): Likewise.
(pupa_memalign): Likewise.
(pupa_mm_init_region): Declare unused variables with
`__attribute__ ((unused))' to silence a gcc warning.
* normal/i386/setjmp.S: Remove tab at the end of the file to
silence a gcc warning.
* loader/i386/pc/linux.c (pupa_rescue_cmd_initrd): Declare unused
variables with `__attribute__ ((unused))' to silence a gcc
warning.
* loader/i386/pc/multiboot.c (pupa_multiboot_unload): Make the
local variable i unsigned to silence a gcc warning.
* kern/term.c: Include <pupa/misc.h>.
(pupa_more_lines): New variable.
(pupa_more): Likewise.
(pupa_putcode): When the pager is active pause at the end of every
screen.
(pupa_set_more): New function.
* include/pupa/term.h (pupa_set_more): New prototype.
* disk/i386/pc/biosdisk.c (pupa_biosdisk_open): Correctly check
for available extensions.
* include/pupa/i386/pc/time.h: New file.
* kern/disk.c: Include <pupa/machine/time.h>.
(PUPA_CACHE_TIMEOUT): New macro.
(pupa_last_time): New variable.
(pupa_disk_open): Flush the cache when there was a timeout.
(pupa_disk_close): Reset the timer.
* kern/i386/pc/startup.S (pupa_get_rtc): Renamed from
pupa_currticks.
* util/misc.c: Include <sys/times.h>
(pupa_get_rtc): New function.
I forgot to check in these changes for a long time. This adds
incomplete support for VGA console, and this is still very
buggy. Also, a lot of consideration is required for I18N,
UNICODE, and VGA font issues. Therefore, assume that this is
such that "better than nothing".
* font/manager.c: New file.
* include/pupa/font.h: Likewise.
* include/pupa/i386/pc/vga.h: Likewise.
* term/i386/pc/vga.c: Likewise.
* util/unifont2pff.rb: Likewise.
* conf/i386-pc.rmk (kernel_img_HEADERS): Added machine/vga.h.
(pkgdata_MODULES): Added vga.mod and font.mod.
(vga_mod_SOURCES): New variables.
(vga_mod_CFLAGS): Likewise.
(font_mod_SOURCES): Likewise.
(font_mod_CFLAGS): Likewise.
* include/pupa/err.h (PUPA_ERR_BAD_FONT): New constant.
* include/pupa/term.h: Include pupa/err.h.
(struct pupa_term): Added init and fini.
Changed the argument of putchar to pupa_uint32_t.
* include/pupa/i386/pc/console.h: Include pupa/symbol.h.
(pupa_console_real_putchar): New prototype.
(pupa_console_putchar): Removed.
(pupa_console_checkkey): Exported.
(pupa_console_getkey): Likewise.
* kern/misc.c (pupa_vsprintf): Add support for UNICODE
characters.
* kern/term.c (pupa_term_set_current): Rewritten.
(pupa_putchar): Likewise.
(pupa_putcode): New function.
* kern/i386/pc/startup.S (pupa_console_putchar): Renamed to ...
(pupa_console_real_putchar): ... this.
(pupa_vga_set_mode): New function.
(pupa_vga_get_font): Likewise.
* normal/command.c: Include pupa/term.h.
(terminal_command): New function.
(pupa_command_init): Register the command "terminal".
* normal/menu.c (DISP_LEFT): Changed to a UNICODE value.
(DISP_UP): Likewise.
(DISP_RIGHT): Likewise.
(DISP_DOWN): Likewise.
(DISP_HLINE): Likewise.
(DISP_VLINE): Likewise.
(DISP_UL): Likewise.
(DISP_UR): Likewise.
(DISP_LL): Likewise.
(DISP_LR): Likewise.
* term/i386/pc/console.c (pupa_console_putchar): New function.
* kern/i386/pc/lzo1x.S: New file.
* util/i386/pc/pupa-mkimage.c: Include lzo1x.h.
(compress_kernel): New variable.
(generate_image): Heavily modified to support compressing a
large part of the core image.
* util/misc.c (pupa_util_read_image): Fix a file descriptor
leak.
(pupa_util_load_image): New function.
* kern/i386/pc/startup.S: Include pupa/machine/kernel.h.
(pupa_compressed_size): New variable.
(codestart): Enable Gate A20 here.
Decompress the compressed part of the core image.
Rearrange the code to put functions and variables which are
required for initialization in the non-compressed part.
Include lzo1x.S.
* kern/i386/pc/init.c (pupa_machine_init): Don't enable Gate A20
here.
* include/pupa/util/misc.h (pupa_util_write_image): Declared.
* include/pupa/i386/pc/kernel.h
(PUPA_KERNEL_MACHINE_COMPRESSED_SIZE): New macro.
(PUPA_KERNEL_MACHINE_INSTALL_DOS_PART): Increased by 4.
(PUPA_KERNEL_MACHINE_INSTALL_BSD_PART): Likewise.
(PUPA_KERNEL_MACHINE_PREFIX): Likewise.
(PUPA_KERNEL_MACHINE_RAW_SIZE): New macro.
* conf/i386-pc.rmk (pupa_mkimage_LDFLAGS): New variable.
* genmk.rb (Image#rule): Put LDFLAGS at the end of a line.
(Utility#rule): Likewise.
* configure.ac: Check if LZO is available.
* include/pupa/normal.h: New file.
* include/pupa/setjmp.h: Likewise.
* include/pupa/i386/setjmp.h: Likewise.
* normal/cmdline.c: Likewise.
* normal/command.c: Likewise.
* normal/main.c: Likewise.
* normal/menu.c: Likewise.
* normal/i386/setjmp.S: Likewise.
* loader/i386/pc/linux.c (pupa_rescue_cmd_linux): Made global.
(pupa_rescue_cmd_initrd): Likewise.
* loader/i386/pc/chainloader.c (pupa_rescue_cmd_chainloader):
Likewise.
* kern/i386/pc/startup.S (translation_table): New variable.
(translate_keycode): New function.
(pupa_console_getkey): Call translate_keycode.
* kern/rescue.c (attempt_normal_mode): New function.
(pupa_enter_rescue_mode): Attempt to execute the normal mode. If
it failed, print a message.
* kern/mm.c (pupa_real_malloc): Print more information when a
free magic is broken.
(pupa_free): If the first free header is not free actually, set
it to P.
* kern/main.c (pupa_load_normal_mode): Just load the module
"normal".
(pupa_main): Don't print the message
"Entering into rescue mode..." here.
* include/pupa/i386/pc/loader.h (pupa_rescue_cmd_initrd):
Declared.
(pupa_rescue_cmd_initrd): Likewise.
(pupa_rescue_cmd_initrd): Likewise.
* include/pupa/symbol.h (FUNCTION): Specify the type.
(VARIABLE): Likewise.
* include/pupa/err.h (pupa_err_t): Added
PUPA_ERR_UNKNOWN_COMMAND.
* include/pupa/dl.h (pupa_dl_set_prefix): Exported.
(pupa_dl_get_prefix): Likewise.
* conf/i386-pc.rmk (pkgdata_MODULES): Added normal.mod.
Added _chain.mod and _linux.mod instead of chain.mod and
linux.mod.
(chain_mod_SOURCES): Renamed to ...
(_chain_mod_SOURCES): ... this.
(chain_mod_CFLAGS): Renamed to ...
(_chain_mod_CFLAGS): ... this.
(linux_mod_SOURCES): Renamed to ...
(_linux_mod_SOURCES): ... this.
(linux_mod_CFLAGS): Renamed to ...
(_linux_mod_CFLAGS): ... this.
(normal_mod_SOURCES): New variable.
(normal_mod_CFLAGS): Likewise.
(normal_mod_ASFLAGS): Likewise.
2003-01-18 Yoshinori K. Okuji <okuji@enbug.org>
* kern/rescue.c (pupa_rescue_cmd_rmmod): Call pupa_dl_unload, if
possible.
* kern/dl.c (pupa_dl_ref): Refer dependending modules
recursively.
(pupa_dl_unref): Unrefer depending modules recursively.
Don't call pupa_dl_unload implicitly, because PUPA can crash if
a module is unloaded before one depending on that module is
unloaded.
(pupa_dl_unload): Unload depending modules explicitly,
if possible.
* include/pupa/i386/pc/linux.h: New file.
* loader/i386/pc/linux.c: Likewise.
* loader/i386/pc/chainloader.c (pupa_chainloader_boot_sector):
Removed.
(pupa_chainloader_unload): Return PUPA_ERR_NONE.
(pupa_rescue_cmd_chainloader): Read the image to 0x7C00 instead
of PUPA_CHAINLOADER_BOOT_SECTOR.
* kern/i386/pc/startup.S: Include pupa/machine/linux.h.
(pupa_linux_prot_size): New variable.
(pupa_linux_tmp_addr): Likewise.
(pupa_linux_real_addr): Likewise.
(pupa_linux_boot_zimage): New function.
(pupa_linux_boot_bzimage): Likewise.
* kern/i386/pc/init.c (struct mem_region): New structure.
(MAX_REGIONS): New macro.
(mem_regions): New variable.
(num_regions): Likewise.
(pupa_os_area_addr): Likewise.
(pupa_os_area_size): Likewise.
(pupa_lower_mem): Likewise.
(pupa_upper_mem): Likewise.
(add_mem_region): New function.
(compact_mem_regions): Likewise.
(pupa_machine_init): Set PUPA_LOWER_MEM and PUPA_UPPER_MEM to
the size of the conventional memory and that of so-called upper
memory (before the first memory hole).
Instead of adding each found region to free memory, use
add_mem_region and add them after removing overlaps.
Also, add only 1/4 of the upper memory to free memory. The rest
is used for loading OS images. Maybe this is ad hoc, but this
makes it much easier to relocate OS images when booting.
* kern/rescue.c (pupa_rescue_cmd_module): Removed.
(pupa_enter_rescue_mode): Don't register initrd and module.
* kern/mm.c: Include pupa/dl.h.
* kern/main.c: Include pupa/file.h and pupa/device.h.
* kern/loader.c (pupa_loader_load_module_func): Removed.
(pupa_loader_load_module): Likewise.
* kern/dl.c (pupa_dl_load): Use the suffix ``.mod'' instead of
``.o''.
* include/pupa/i386/pc/loader.h (pupa_linux_prot_size): Declared.
(pupa_linux_tmp_addr): Likewise.
(pupa_linux_real_addr): Likewise.
(pupa_linux_boot_zimage): Likewise.
(pupa_linux_boot_bzimage): Likewise.
* include/pupa/i386/pc/init.h (pupa_lower_mem): Declared.
(pupa_upper_mem): Likewise.
(pupa_gate_a20): Don't export, because turning off Gate A20 in a
module is too dangerous.
* include/pupa/loader.h (pupa_os_area_addr): Declared.
(pupa_os_area_size): Likewise.
(pupa_loader_set): Remove the first argument. Loader doesn't
manage modules or initrd any longer.
(pupa_loader_load_module): Removed.
* conf/i386-pc.rmk (pkgdata_MODULES): Added linux.mod.
(linux_mod_SOURCES): New variable.
(linux_mod_CFLAGS): Likewise.
* util/i386/pc/pupa-setup.c: Include pupa/machine/kernel.h.
(setup): Configure the installed partition information and the
dl prefix.
* loader/i386/pc/chainloader.c (my_mod): New variable.
(pupa_chainloader_unload): New function.
(pupa_rescue_cmd_chainloader): Refer itself.
(PUPA_MOD_INIT): Save its own module in MY_MOD.
* kern/i386/pc/startup.S (install_partition): Removed.
(version_string): Likewise.
(config_file): Likewise.
(pupa_install_dos_part): New variable.
(pupa_install_bsd_part): Likewise.
(pupa_prefix): Likewise.
(pupa_chainloader_real_boot): Call pupa_dl_unload_all.
* kern/i386/pc/init.c: Include pupa/machine/kernel.h, pupa/dl.h
and pupa/misc.h.
(make_install_device): New function.
(pupa_machine_init): Set the dl prefix.
* kern/rescue.c: Include pupa/rescue.h and pupa/dl.h.
(buf): Renamed to ...
(linebuf): ... this.
(pupa_rescue_cmd_prefix): New function.
(pupa_rescue_cmd_insmod): Likewise.
(pupa_rescue_cmd_rmmod): Likewise.
(pupa_rescue_cmd_lsmod): Likewise.
(pupa_enter_rescue_mode): Register new commands: prefix, insmod,
rmmod and lsmod.
* kern/mm.c (pupa_memalign): If failed even after invalidating
disk caches, unload unneeded modules and retry.
* kern/misc.c (pupa_memmove): New function.
(pupa_memcpy): Removed.
(pupa_strcpy): New function.
(pupa_itoa): Made static.
* kern/dl.c (pupa_dl_iterate): New function.
(pupa_dl_ref): Likewise.
(pupa_dl_unref): Likewise.
(pupa_dl_unload): Return if succeeded or not.
(pupa_dl_unload_unneeded): New function.
(pupa_dl_unload_all): Likewise.
(pupa_dl_init): Renamed to ...
(pupa_dl_set_prefix): ... this.
(pupa_dl_get_prefix): New function.
* include/pupa/i386/pc/kernel.h: Include pupa/types.h.
(PUPA_KERNEL_MACHINE_INSTALL_DOS_PART): New macro.
(PUPA_KERNEL_MACHINE_INSTALL_BSD_PART): Likewise.
(PUPA_KERNEL_MACHINE_PREFIX): Likewise.
(pupa_install_dos_part): Declared.
(pupa_install_bsd_part): Likewise.
(pupa_prefix): Likewise.
(pupa_boot_drive): Likewise.
* include/pupa/types.h: Fix a typo.
* include/pupa/misc.h (pupa_memcpy): New macro. Just an alias to
pupa_memmove.
(pupa_memmove): Declared.
(pupa_strcpy): Likewise.
* include/pupa/dl.h (PUPA_MOD_INIT): Change the prototype. Now
pupa_mod_init takes one argument, its own module.
(pupa_dl_unload_unneeded): Declared.
(pupa_dl_unload_all): Likewise.
(pupa_dl_ref): Likewise.
(pupa_dl_unref): Likewise.
(pupa_dl_iterate): Likewise.
(pupa_dl_init): Renamed to ...
(pupa_dl_set_prefix): ... this.
(pupa_dl_get_prefix): Declared.
* fs/fat.c [!PUPA_UTIL] (my_mod): New variable.
(pupa_fat_dir) [!PUPA_UTIL]: Prevent the fat module from being
unloaded.
(pupa_fat_open) [!PUPA_UTIL]: Refer itself if succeeded.
(pupa_fat_close) [!PUPA_UTIL]: Unrefer itself.
* configure.ac (tmp_CFLAGS): Added -Wshadow, -Wpointer-arith,
-Wmissing-prototypes, -Wundef and -Wstrict-prototypes.
* util/i386/pc/pupa-setup.c (setup): Define the internal
function find_first_partition_start at the top level, because GCC
3.0.x cannot compile internal functions in deeper scopes
correctly.
(find_root_device): Use lstat instead of stat.
Don't follow symbolic links.
Fix the path-constructing code.
* util/i386/pc/biosdisk.c [__linux__] (BLKFLSBUF): New macro.
(pupa_util_biosdisk_open) [__linux__]: Get the size of a device
by a BLKGETSIZE ioctl first, because block devices don't fill
the member st_mode of the structure stat on Linux.
[__linux__] (linux_find_partition): Use a temporary buffer
REAL_DEV for the working space. Copy it to DEV before returning.
(open_device) [__linux__]: Call ioctl with BLKFLSBUF to make the
buffer cache consistent.
(get_os_disk) [__linux__]: Use the length 5 instead of 4 for
strncmp. The previous value was merely wrong.
(pupa_util_biosdisk_get_pupa_dev): Use stat instead of lstat.
* fs/fat.c (pupa_fat_read_data): Shift 4 instead of 12 when the
FAT size is 12. The previous value was merely wrong.
* kern/main.c (pupa_main): Don't split the starting message from
newlines.
* kern/term.c (pupa_putchar): Put CR after LF instead of before
LF, because BIOS goes crazy about character attributes in this
case.
Use -mrtd and -mregparm=3 to reduce the generated code sizes.
This means that any missing prototypes could be fatal. Also, you
must take care when writing assembly code. See the comments at
the beginning of startup.S, for more details.
* kern/i386/pc/startup.S (pupa_halt): Modified for the new
compilation mechanism.
(pupa_chainloader_real_boot): Likewise.
(pupa_biosdisk_rw_int13_extensions): Likewise.
(pupa_biosdisk_rw_standard): Likewise.
(pupa_biosdisk_check_int13_extensions): Likewise.
(pupa_biosdisk_get_diskinfo_int13_extensions): Likewise.
(pupa_biosdisk_get_diskinfo_standard): Likewise.
(pupa_get_memsize): Likewise.
(pupa_get_mmap_entry): Likewise.
(pupa_console_putchar): Likewise.
(pupa_console_setcursor): Likewise.
(pupa_getrtsecs): Use pushl instead of push.
* kern/i386/pc/init.c (pupa_machine_init): Use the scratch
memory instead of the stack for a mmap entry, because some
BIOSes may ignore the maximum size and overflow.
* conf/i386-pc.rmk (COMMON_CFLAGS): Added -mrtd and -mregparm=3.
* genmk.rb (PModule#rule): Compile automatically generated
sources with module-specific CFLAGS as well as other sources.
