This patch implements a search for a specific configuration when the config
file is on a remoteserver. It uses the following order:
1) DHCP client UUID option.
2) MAC address (in lower case hexadecimal with dash separators);
3) IP (in upper case hexadecimal) or IPv6;
4) The original grub.cfg file.
This procedure is similar to what is used by pxelinux and yaboot:
http://www.syslinux.org/wiki/index.php/PXELINUX#config
It is enabled by default but can be disabled by setting the environment
variable "feature_net_search_cfg" to "n" in an embedded configuration.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=873406
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch sets a net_<interface>_clientid and net_<interface>_clientuuid
GRUB environment variables, using the DHCP client ID and UUID options if
these are found.
In the same way than net_<interface>_<option> variables are set for other
options such domain name, boot file, next server, etc.
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The DHCP Options and BOOTP Vendor Extensions enum values are a mixture of
decimal and hexadecimal numbers. Change this to consistently use decimal
numbers for all since that is how these values are defined by RFC 2132.
Suggested-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The luks module contains quite a lot of logic to parse cipher and
cipher-mode strings like aes-xts-plain64 into constants to apply them
to the grub_cryptodisk_t structure. This code will be required by the
upcoming luks2 module, as well, which is why this commit moves it into
its own function grub_cryptodisk_setcipher in the cryptodisk module.
While the strings are probably rather specific to the LUKS modules, it
certainly does make sense that the cryptodisk module houses code to set
up its own internal ciphers instead of hosting that code in the luks
module.
Except for necessary adjustments around error handling, this commit does
an exact move of the cipher configuration logic from luks.c to
cryptodisk.c. Any behavior changes are unintentional.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is needed for the zstd module build for riscv64-emu.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The following are two use cases from Rajat Jain <rajatjain@juniper.net>:
1) We have a board that boots Linux and this board itself can be plugged
into one of different chassis types. We need to pass different
parameters to the kernel based on the "CHASSIS_TYPE" information
that is passed by the bios in the DMI/SMBIOS tables.
2) We may have a USB stick that can go into multiple boards, and the
exact kernel to be loaded depends on the machine information
(PRODUCT_NAME etc) passed via the DMI.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This adds the GUID and includes it in lsefisystab output.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add IA64 to the architectures excluding a declaration for
grub_arch_sync_dma_caches().
IA64 does not include any of the source files that require the function,
but was overlooked for d8901e3ba1 ("cache: Fix compilation for ppc,
sparc and arm64").
Add it to the list of excluding architectures in order to not get
missing symbol errors when running grub-mkimage.
Reported-by: Alexander Graf <agraf@csgraf.de>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Simply adds the missing packed attribute to 'struct grub_acpi_madt'.
[ 233s] ../../grub-core/commands/lsacpi.c: In function 'disp_acpi_xsdt_table':
[ 233s] ../../grub-core/commands/lsacpi.c:201:27: error: converting a packed 'struct grub_acpi_table_header' pointer (alignment 1) to a 'struct grub_acpi_madt' pointer (alignment 4) may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 233s] 201 | disp_madt_table ((struct grub_acpi_madt *) t);
[ 233s] | ^~~~~~~~~~~~~~
[ 233s] In file included from ../../grub-core/commands/lsacpi.c:23:
[ 233s] ../../include/grub/acpi.h:50:8: note: defined here
[ 233s] 50 | struct grub_acpi_table_header
[ 233s] | ^~~~~~~~~~~~~~~~~~~~~~
[ 233s] ../../include/grub/acpi.h:90:8: note: defined here
[ 233s] 90 | struct grub_acpi_madt
[ 233s] | ^~~~~~~~~~~~~~
[ 233s] ../../grub-core/commands/lsacpi.c: In function 'disp_acpi_rsdt_table':
[ 233s] ../../grub-core/commands/lsacpi.c:225:27: error: converting a packed 'struct grub_acpi_table_header' pointer (alignment 1) to a 'struct grub_acpi_madt' pointer (alignment 4) may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 233s] 225 | disp_madt_table ((struct grub_acpi_madt *) t);
[ 233s] | ^~~~~~~~~~~~~~
[ 233s] In file included from ../../grub-core/commands/lsacpi.c:23:
[ 233s] ../../include/grub/acpi.h:50:8: note: defined here
[ 233s] 50 | struct grub_acpi_table_header
[ 233s] | ^~~~~~~~~~~~~~~~~~~~~~
[ 233s] ../../include/grub/acpi.h:90:8: note: defined here
[ 233s] 90 | struct grub_acpi_madt
[ 233s] | ^~~~~~~~~~~~~~
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Simply adds the missing packed attribute to 'struct grub_hfs_extent'.
[ 83s] ../grub-core/fs/hfs.c: In function 'grub_hfs_iterate_records':
[ 83s] ../grub-core/fs/hfs.c:699:9: error: taking address of packed member of 'struct grub_hfs_sblock' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 83s] 699 | ? (&data->sblock.catalog_recs)
[ 83s] | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~
[ 83s] ../grub-core/fs/hfs.c:700:9: error: taking address of packed member of 'struct grub_hfs_sblock' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 83s] 700 | : (&data->sblock.extent_recs));
[ 83s] | ~^~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Some older GCC versions produce following error when x86 MSR modules are build:
In file included from commands/i386/rdmsr.c:29:0:
../include/grub/i386/rdmsr.h:27:29: error: no previous prototype for ‘grub_msr_read’ [-Werror=missing-prototypes]
extern inline grub_uint64_t grub_msr_read (grub_uint32_t msr_id)
^
cc1: all warnings being treated as errors
This happens due to lack of support for a such usage of extern keyword
in older GCCs. Additionally, this usage is not consistent with the rest
of codebase. So, replace it with static keyword.
Additionally, fix incorrect coding style.
Reported-by: Eric Snowberg <eric.snowberg@oracle.com>
Reported-by: adrian15 <adrian15sgd@gmail.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Vladimir 'phcoder' Serbinenko <phcoder@gmail.com>
Reviewed-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: adrian15 <adrian15sgd@gmail.com>
Previously the setup_header length was just assumed to be the size of the
linux_kernel_params struct. The linux x86 32-bit boot protocol says that the
end of the linux_i386_kernel_header is at 0x202 + the byte value at 0x201 in
the linux_i386_kernel_header. So, calculate the size of the header using the
end of the linux_i386_kernel_header, rather than assume it is the size of the
linux_kernel_params struct.
Additionally, add some required members to the linux_kernel_params
struct and align the content of linux_i386_kernel_header struct with
it. New members naming was taken directly from Linux kernel source.
linux_kernel_params and linux_i386_kernel_header structs require more
cleanup. However, this is not urgent, so, let's do this after release.
Just in case...
Signed-off-by: Andrew Jeddeloh <andrew.jeddeloh@coreos.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Vladimir Serbinenko <phcoder@google.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Recent versions of binutils dropped support for the a.out and COFF
formats on sparc64 targets. Since the boot loader on sparc64 is
supposed to be an a.out binary and the a.out header entries are
rather simple to calculate in our case, we just write the header
ourselves instead of relying on external tools to do that.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
gnulib now replaces vfprintf and hence its format becomes GNU_PRINTF format
This also fixes matching definitions to always use GNU format
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Vladimir Serbinenko <phcoder@google.com>
I didn't check the spec but pointer to address doesn't make much sense
and doesn't match the code.
Signed-off-by: Vladimir Serbinenko <phcoder@google.com>
This patch is similiar to commit e795b9011 (RISC-V: Add libgcc helpers
for clz) but for SPARC target.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
This patch is similiar to commit e795b9011 (RISC-V: Add libgcc helpers
for clz) but for MIPS target.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
In addition to what was already there, Gnulib's <intprops.h> needs SCHAR_MIN,
SCHAR_MAX, SHRT_MIN, INT_MIN, LONG_MIN, and LONG_MAX. Fixes build on CentOS 7.
Reported-by: "Chen, Farrah" <farrah.chen@intel.com>
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Even though we were parsing some DHCP options sent by the server, so far
we are only using the BOOTP 2-way handshake, even when talking to a DHCP
server.
Change this by actually sending out DHCP DISCOVER packets instead of the
generic (mostly empty) BOOTP BOOTREQUEST packets.
A pure BOOTP server would ignore the extra DHCP options in the DISCOVER
packet and would just reply with a BOOTREPLY packet, which we also
handle in the code.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In respone to a BOOTREQUEST packet a BOOTP server would answer with a BOOTREPLY
packet, which ends the conversation for good. DHCP uses a 4-way handshake,
where the initial server respone is an OFFER, which has to be answered with
REQUEST by the client again, only to be completed by an ACKNOWLEDGE packet
from the server.
Teach the grub_net_process_dhcp() function to deal with OFFER packets,
and treat ACK packets the same es BOOTREPLY packets.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The BOOTP RFC describes the boot file name and the server name as being part
of the integral BOOTP data structure, with some limits on the size of them.
DHCP extends this by allowing them to be separate DHCP options, which is more
flexible.
Teach the code dealing with those fields to check for those DHCP options first
and use this information, if provided. We fall back to using the BOOTP
information if those options are not used.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently we have a global timeout for all network cards in the BOOTP/DHCP
discovery process.
Make this timeout a per-interface one, so better accommodate the upcoming
4-way DHCP handshake and to also cover the lease time limit a DHCP offer
will come with.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Change the interface of the function dealing with incoming BOOTP packets
to take an interface instead of a card, to allow more fine per-interface
state (timeout, handshake state) later on.
Use the opportunity to clean up the code a bit.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
DHCP specifies a special dummy option OVERLOAD, to allow DHCP options to
spill over into the (legacy) BOOTFILE and SNAME fields.
Parse and handle this option properly.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In order to be able to read from and write to model-specific registers,
two new modules are added. They are i386 specific, as the cpuid module.
rdmsr module registers the command rdmsr that allows reading from a MSR.
wrmsr module registers the command wrmsr that allows writing to a MSR.
wrmsr module is disabled if UEFI secure boot is enabled.
Please note that on SMP systems, interacting with a MSR that has a scope
per hardware thread, implies that the value only applies to the
particular cpu/core/thread that ran the command.
Also, if you specify a reserved or unimplemented MSR address, it will
cause a general protection exception (which is not currently being
handled) and the system will reboot.
Signed-off-by: Jesús Diéguez Fernández <jesusdf@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In order to maintain the coding style consistency, it was requested to
replace the methods that use "__asm__ __volatile__" with "asm volatile".
Signed-off-by: Jesús Diéguez Fernández <jesusdf@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a new disk driver called obdisk for IEEE1275 platforms. Currently
the only platform using this disk driver is SPARC, however other IEEE1275
platforms could start using it if they so choose. While the functionality
within the current IEEE1275 ofdisk driver may be suitable for PPC and x86, it
presented too many problems on SPARC hardware.
Within the old ofdisk, there is not a way to determine the true canonical
name for the disk. Within Open Boot, the same disk can have multiple names
but all reference the same disk. For example the same disk can be referenced
by its SAS WWN, using this form:
/pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@w5000cca02f037d6d,0
It can also be referenced by its PHY identifier using this form:
/pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@p0
It can also be referenced by its Target identifier using this form:
/pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@0
Also, when the LUN=0, it is legal to omit the ,0 from the device name. So with
the disk above, before taking into account the device aliases, there are 6 ways
to reference the same disk.
Then it is possible to have 0 .. n device aliases all representing the same disk.
Within this new driver the true canonical name is determined using the the
IEEE1275 encode-unit and decode-unit commands when address_cells == 4. This
will determine the true single canonical name for the device so multiple ihandles
are not opened for the same device. This is what frequently happens with the old
ofdisk driver. With some devices when they are opened multiple times it causes
the entire system to hang.
Another problem solved with this driver is devices that do not have a device
alias can be booted and used within GRUB. Within the old ofdisk, this was not
possible, unless it was the original boot device. All devices behind a SAS
or SCSI parent can be found. Within the old ofdisk, finding these disks
relied on there being an alias defined. The alias requirement is not
necessary with this new driver. It can also find devices behind a parent
after they have been hot-plugged. This is something that is not possible
with the old ofdisk driver.
The old ofdisk driver also incorrectly assumes that the device pointing to by a
device alias is in its true canonical form. This assumption is never made with
this new driver.
Another issue solved with this driver is that it properly caches the ihandle
for all open devices. The old ofdisk tries to do this by caching the last
opened ihandle. However this does not work properly because the layer above
does not use a consistent device name for the same disk when calling into the
driver. This is because the upper layer uses the bootpath value returned within
/chosen, other times it uses the device alias, and other times it uses the
value within grub.cfg. It does not have a way to figure out that these devices
are the same disk. This is not a problem with this new driver.
Due to the way GRUB repeatedly opens and closes the same disk. Caching the
ihandle is important on SPARC. Without caching, some SAS devices can take
15 - 20 minutes to get to the GRUB menu. This ihandle caching is not possible
without correctly having the canonical disk name.
When available, this driver also tries to use the deblocker #blocks and
a way of determining the disk size.
Finally and probably most importantly, this new driver is also capable of
seeing all partitions on a GPT disk. With the old driver, the GPT
partition table can not be read and only the first partition on the disk
can be seen.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Many of GRUB's utilities don't check anywhere near all the possible
write errors. For example, if grub-install runs out of space when
copying a file, it won't notice. There were missing checks for the
return values of write, fflush, fsync, and close (or the equivalents on
other OSes), all of which must be checked.
I tried to be consistent with the existing logging practices of the
various hostdisk implementations, but they weren't entirely consistent
to start with so I used my judgement. The result at least looks
reasonable on GNU/Linux when I provoke a write error:
Installing for x86_64-efi platform.
grub-install: error: cannot copy `/usr/lib/grub/x86_64-efi-signed/grubx64.efi.signed' to `/boot/efi/EFI/debian/grubx64.efi': No space left on device.
There are more missing checks in other utilities, but this should fix
the most critical ones.
Fixes Debian bug #922741.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top of EFI
firmware. If so, return "arm-efi". If not, fall back to "arm-uboot" as
previously.
Split out the code to (maybe) load the efivar module and check for
/sys/firmware/efi into a common helper routine is_efi_system().
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This reverts commit 082fd84d52.
Incorrect version of the patch was pushed into the git repo.
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top
of EFI firmware. If so, return "arm-efi". If not, fall back to
"arm-uboot" as previously.
Heavily inspired by the existing code for x86.
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We now have signature check logic in grub which allows us to treat
files differently depending on their file type.
Treat a loaded device tree like an overlayed ACPI table.
Both describe hardware, so I suppose their threat level is the same.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for RISC-V to the grub build system. With this
patch, I can successfully build grub on RISC-V as a UEFI application.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Gcc may decide it wants to call helper functions to execute clz. Provide
them in our own copy of libgcc.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
To support a new architecture we need to provide a few helper functions
for memory, cache, timer, etc support.
This patch adds the remainders of those. Some bits are still disabled,
as I couldn't guarantee that we're always running on models / in modes
where the respective hardware is available.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds awareness of RISC-V relocations throughout the grub tools
as well as dynamic linkage and elf->PE relocation conversion support.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We currently only support to run grub on RISC-V as UEFI payload. Ideally,
we also only want to support running Linux underneath as UEFI payload.
Prepare that with some Linux boot stub code. Once the arm64 target is
generalized, we can hook into that one and gain boot functionality.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds a 32/64 capable setjmp implementation for RISC-V.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The RISC-V ABI document outlines ELF header structure and relocation
information. Pull the respective magic numbers into our elf header
so we can make use of them.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The PE format defines magic numbers as well as relocation identifiers for
RISC-V. Add them to our include file, so we can make use of them.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Some architectures want to boot Linux as plain UEFI binary. Today that
really only encompasses ARM and AArch64, but going forward more
architectures may adopt that model.
So rename our internal API accordingly.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There is UEFI firmware popping up in the wild now that implements stricter
permission checks using NX and write protect page table entry bits.
This means that firmware now may fail to load binaries if its individual
sections are not page aligned, as otherwise it can not ensure permission
boundaries.
So let's bump all efi section alignments up to 4k (EFI page size). That way
we will stay compatible going forward.
Unfortunately our internals can't deal very well with a mismatch of alignment
between the virtual and file offsets, so we have to also pad our target
binary a bit.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Julien ROBIN <julien.robin28@free.fr>
This patch allows to have bigger kernels. If the kernel grows, then it will
overwrite the initrd when it is extracted.
Signed-off-by: Guillaume GARDET <guillaume.gardet@arm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A certain amount of dynamic space is required for the handover from
GRUB/Linux-EFI-stub. This entails things like initrd addresses,
address-cells entries and associated strings.
But move this into a proper centralised #define rather than live-code
it in the loader.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
uboot_disk_write() is currently lacking the write support
to storage devices because, historically, those devices did not
implement block_write() in U-Boot.
The solution has been tested using a patched U-Boot loading
and booting GRUB in a QEMU vexpress-a9 environment.
The disk write operations were triggered with GRUB's save_env
command.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add support for performing basic TPM measurements. Right now this only
supports extending PCRs statically and only on UEFI. In future we might
want to have some sort of mechanism for choosing which events get logged
to which PCRs, but this seems like a good default policy and we can wait
to see whether anyone has a use case before adding more complexity.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Pass all commands executed by GRUB to the verifiers layer. Most verifiers will
ignore this, but some (such as the TPM verifier) want to be able to measure and
log each command executed in order to ensure that the boot state is as expected.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add xen_pvh support to grub-install.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
