server cannot be NULL at this point (we return error earlier if it is).
Also structure is zalloc'ed, so no need to explicitly initialize
members to 0.
Found by: Coverity scan.
CID: 73837
While adding tcp window scaling support I was finding that I'd get some packet
loss or reordering when transferring from large distances and grub would just
timeout. This is because we weren't ack'ing when we got our OOO packet, so the
sender didn't know it needed to retransmit anything, so eventually it would fill
the window and stop transmitting, and we'd time out. Fix this by ACK'ing when
we don't find our next sequence numbered packet. With this fix I no longer time
out. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
We were resetting nb->data every time we tried a new server, but we need to do
it every time we try for a different record, otherwise we don't end up falling
back to the A record properly. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
sun4v vnet devices do not implement the support of duplex and speed
instance attributes. An attempt to open such a device with
the attributes will fail:
ok select net:speed=auto,duplex=auto
Unknown key 'speed'
Unknown key 'duplex'
Manual Configuration: Host IP, boot server and filename must be specified
WARNING: /virtual-devices@100/channel-devices@200/network@0: Can't open OBP standard TFTP package
Can't open device
ok
Therefore, let's not set SUFFIX for such devices.
Signed-off-by: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
The EFI spec indicates that get_status() should return the address of the buffer
we passed into transmit to indicate the the buffer was transmitted. However we
have boxes where the firmware returns some arbitrary address instead, which
makes grub think that we've not sent anything. So since we have the SNP stuff
opened in exclusive mode just assume any non-NULL txbuf means that our transmit
occurred properly. This makes grub able to do its networking stuff properly on
our broken firmware. Thanks,
cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Exclusive open on SNP will close all existing protocol instances which
may disable all receive filters on interface. Reinstall them after we
opened protocol exclusively.
Also follow UEFI specification recommendation and stop interfaces when
closing them:
Unexpected system errors, reboots and hangs can occur if an OS is loaded
and the network devices are not Shutdown() and Stopped().
Also by: Mark Salter <msalter@redhat.com>
Closes: 45204
From RFC1542:
The 'giaddr' field is rather poorly named. It exists to facilitate
the transfer of BOOTREQUEST messages from a client, through BOOTP
relay agents, to servers on different networks than the client.
Similarly, it facilitates the delivery of BOOTREPLY messages from the
servers, through BOOTP relay agents, back to the client. In no case
does it represent a general IP router to be used by the client. A
BOOTP client MUST set the 'giaddr' field to zero (0.0.0.0) in all
BOOTREQUEST messages it generates.
A BOOTP client MUST NOT interpret the 'giaddr' field of a BOOTREPLY
message to be the IP address of an IP router. A BOOTP client SHOULD
completely ignore the contents of the 'giaddr' field in BOOTREPLY
messages.
Leave code ifdef'd out for the time being in case we see regression.
Suggested by: Rink Springer <rink@rink.nu>
Closes: 43396
EDK2 network stack is based on Managed Network Protocol which is layered
on top of Simple Management Protocol and does background polling. This
polling races with grub for received (and probably trasmitted) packets
which causes either serious slowdown or complete failure to load files.
Open SNP device exclusively. This destroys all child MNP instances and
stops background polling.
Exclusive open cannot be done when enumerating cards, as it would destroy
PXE information we need to autoconfigure interface; and it cannot be done
during autoconfiguration as we need to do it for non-PXE boot as well. So
move SNP open to card ->open method and add matching ->close to clean up.
Based on patch from Mark Salter <msalter@redhat.com>
Also-By: Mark Salter <msalter@redhat.com>
Closes: 41731
EDK2 PXE driver creates two child devices - IPv4 and IPv6 - with
bound SNP instance. This means we get three cards for every physical
adapter when enumerating. Not only is this confusing, this may result
in grub ignoring packets that come in via the "wrong" card.
Example of device hierarchy is
Ctrl[91] PciRoot(0x0)/Pci(0x3,0x0)
Ctrl[95] PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)
Ctrl[B4] PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)/IPv4(0.0.0.0)
Ctrl[BC] PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)/IPv6(0000:0000:0000:0000:0000:0000:0000:0000)
Skip PXE created virtual devices when enumerating cards. Make sure to
find real card when applying initial autoconfiguration during PXE boot,
this information is associated with one of child devices.
This reverts commits 47b2bee3ef
and 8d3c4544ff. It is not safe
to free allocated cards, dangling pointers main remain. Such
cleanup requires more changes in net core.
This restrict ARP handling to MAC and IP addresses but in practice we need
only this case anyway and other cases are very rar if exist at all. It makes
code much simpler and less error-prone.
Using the http module to download config files, produces memory errors,
after the config file is downloaded.
The error was traced to the tcp stack in grub-core/net/tcp.c. The wrong
netbuff pointer was being freed in the clean up loop.
Changing the code to free the correct netbuff pointer removes the runtime
error.
Closes 42765.
Many routers have long router advertisment interval configured by
default. The Neighbor Discovery protocol (RFC4861) has defined default
MaxRtrAdvInterval value as 600 seconds and
MinRtrAdvInterval as 0.33*MaxRtrAdvInterval. This makes
net_ipv6_autoconf fails more often than not as currently it passively
listens the RA message to perfom address autoconfiguration.
This patch tries to send router solicitation to overcome the problem of
long RA interval.
v2:
use cpu_to_be macro for network byte order conversion
add missing error handling
The structure size used in grub_netbuff_pull to get the pointer to
option header is apparently wrong, which leads to subsequent range check
failed and therefore not responding to any neighbor solicit message in my
testing.
It enables net boot even when there is no bootp/dhcp server.
* grub-core/net/drivers/ieee1275/ofnet.c: Add grub_ieee1275_parse_bootpath and
call it at grub_ieee1275_net_config_real.
* grub-core/kern/ieee1275/init.c: Add bootpath to grub_ieee1275_net_config.
* include/grub/ieee1275/ieee1275.h: Likewise.
In net/net.c there is a while (1) that only exits if there is a stop
condition and more then 10 packages or if there is no package received.
If GRUB is idle and enter in this loop, the only condition to leave is
if it doesn't have incoming packages. In a network with heavy traffic
this never happens.
Adding multiple questions on a single DNS query is not supportted by
most DNS servers. This patch issues two separate DNS queries
sequentially for ipv4 and then for ipv6.
Fixes: https://savannah.gnu.org/bugs/?39710
* grub-core/net/bootp.c (parse_dhcp_vendor): Add DNS option.
* grub-core/net/dns.c (grub_dns_qtype_id): New enum.
* (grub_net_dns_lookup): Now using separated dns packages.
* (grub_cmd_nslookup): Add error condition.
* (grub_cmd_list_dns): Print DNS option.
* (grub_cmd_add_dns): Add four parameters: --only-ipv4,
* --only-ipv6, --prefer-ipv4, and --prefer-ipv6.
* include/grub/net.h (grub_dns_option_t): New enum.
* (grub_net_network_level_address): option added.
Also-by: Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com>
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com>
strncpy.
* grub-core/fs/jfs.c (grub_jfs_lookup_symlink): Likewise.
* grub-core/kern/misc.c (grub_strncpy): Move from here ...
* include/grub/misc.h (grub_strncpy): ... to here. Make inline.
* grub-core/net/net.c (grub_net_addr_to_str): Use COMPILE_TIME_ASSERT
+ strcpy rather than strncpy.
