* util/grub.d/00_header.in: Move last prepare_grub_to_access_device()
call from here ...
* util/grub.d/10_hurd.in: ... to here ...
* util/grub.d/10_linux.in: ... and here.
* util/update-grub_lib.in (prepare_grub_to_access_device): Remove
check for partition that provides /boot/grub. Its logic is flawed,
as it prevents prepare_grub_to_access_device() from being called
multiple times.
* util/update-grub_lib.in (prepare_grub_to_access_device): Issue
"insmod" command directly when abstraction modules are needed,
instead of reliing on GRUB_PRELOAD_MODULES (which had no effect
since it had already been processed).
* util/i386/pc/grub-install.in: If the drive is LVM or RAID, prepend
it in prefix.
* util/i386/pc/grub-setup.c (main): Don't handle prefix at all. Set
`must_embed' to 1 when root_dev is a RAID device. When dest_dev is
a RAID device, run setup() for all members independently on whether
LVM abstraction is being used.
(setup): Don't handle prefix at all; let grub-mkimage take care of it.
If grub-mkimage has set `*install_dos_part == -2', don't override this
value.
Perform *install_dos_part adjustments independently on whether
we're embedding or not.
Clarify error message when image is too big for embedding.
Remove duplicate *install_dos_part stanza.
* util/update-grub_lib.in (prepare_grub_to_access_device): Use
/boot/grub for the check in last commit, not /boot (they could be
different partitions).
* util/update-grub_lib.in (prepare_grub_to_access_device): If we were
asked to setup access for the same partition that provides /boot,
don't bother using UUIDs since our root already has the value we
want.
* util/i386/pc/grub-mkimage.c (generate_image): If we included a drive
in our prefix, set install_{dos,bsd}_part = -2 to indicate this can be
skipped later.
(main): If a memdisk was requested, add "(memdisk)" drive explicitly to
the beginning of the prefix.
* kern/i386/pc/init.c (make_install_device): Remove memdisk check.
It is assumed that if we have a memdisk, grub-mkimage has set
grub_prefix to include the "(memdisk)" drive in it.
* util/biosdisk.c (open_device): Revert last change to the
function, it broke installation. The sector needs to be
different dependent on which device is opened.
* util/grub-emu.c (grub_machine_init): Move code in this function from
here ...
(main): ... to here (before grub_util_biosdisk_init() call, to prevent
segfault in case grub_printf() is called).
* util/i386/pc/grub-install.in: Append `--device-map=${device_map}' to
grub_probe. Update all users not to explicitly add it again.
(grub_device): New variable; contains corresponding device for grubdir.
(fs_module, partmap_module, devabstraction_module): Pass
`--device ${grub_device}' to grub_probe to avoid traversing /dev
every time.
* util/biosdisk.c (get_drive): Verify that `map[i].drive' is non-NULL
before dereferencing it.
* fs/fat.c (struct grub_fat_bpb): Move fat32-specific fields into a
union with fat12/fat16-specific ones. Add some new fields, including
`num_serial' for both versions.
(struct grub_fat_data): Add `uuid' member.
(grub_fat_mount): Refer to fat32-specific fields in `bpb' by their new
names. Initialize `data->uuid' using `num_serial'.
(grub_fat_uuid): New function.
(grub_fat_fs): Reference grub_fat_uuid() in `uuid' struct member.
* fs/reiserfs.c (grub_reiserfs_superblock): Add `uuid' field.
(grub_reiserfs_uuid): New function.
(grub_reiserfs_fs): Reference grub_reiserfs_uuid() in `uuid' struct
member.
* fs/xfs.c (grub_xfs_sblock): Add `uuid' field.
(grub_xfs_uuid): New function.
(grub_xfs_fs): Reference grub_reiserfs_uuid() in `uuid' struct member.
* util/biosdisk.c (linux_find_partition): Simplify logic and
make the code more universal. Keep special processing for
devfs, but use a simple rule for all other devices. If the
device ends with a number, append 'p' and the partition number.
Otherwise, append only the partition number.
* util/update-grub.in (GRUB_DISABLE_LINUX_UUID): Export variable.
* util/grub.d/10_linux.in: If GRUB_DEVICE_UUID is set, and
GRUB_DISABLE_LINUX_UUID isn't true, use the filesystem UUIDs as
the `root' parameter to Linux.
* commands/search.c (options): Rename --fs_uuid to --fs-uuid.
* util/update-grub_lib.in (prepare_grub_to_access_device): Replace
--fs_uuid with --fs-uuid.
* util/update-grub.in: Allow filesystem UUID probes to fail (since not
all filesystems support them).
* util/grub.d/00_header.in: Remove obsolete comment referencing
convert_system_path_to_grub_path().
* util/update-grub.in: Likewise.
* util/update-grub_lib.in (is_path_readable_by_grub): New function.
(convert_system_path_to_grub_path): Add a warning message explaining
that this function is deprecated. Rely on is_path_readable_by_grub()
for the readability checks.
(font_path): Use is_path_readable_by_grub() for the readability
check rather than convert_system_path_to_grub_path().
* util/update-grub_lib.in (prepare_grub_to_access_device): New function.
* util/update-grub.in: Set `GRUB_FONT_PATH' to the system path, without
converting it first.
* util/grub.d/00_header.in: Use prepare_grub_to_access_device() to setup
grub.cfg for access to font file, and afterwards call it again to set
the root device.
* commands/search.c (options): Add --fs_uuid option.
(search_fs_uuid): New function.
(grub_cmd_search): Fix --set argument passing.
Use search_fs_uuid() when requested via --fs_uuid.
(grub_search_init): Update help message.
* fs/ext2.c (struct grub_ext2_sblock): Rename `unique_id' to `uuid'
and redeclare it as an array of 16-bit words.
(grub_ext2_uuid): New function.
(grub_ext2_fs): Reference grub_ext2_uuid() in `uuid' struct member.
* include/grub/fs.h (struct grub_fs): Add `uuid' struct member.
* util/update-grub.in (GRUB_DEVICE_UUID, GRUB_DEVICE_BOOT)
(GRUB_DEVICE_BOOT_UUID): New variables.
(GRUB_DRIVE. GRUB_DRIVE_BOOT. GRUB_DRIVE_BOOT_GRUB): Remove.
* util/grub.d/00_header.in: Set root using `search --fs_uuid' command
whenever possible.
* util/grub.d/10_hurd.in: Avoid explicit use of root drive. Instead,
just assume `root' variable has the right value.
* util/grub.d/10_linux.in: Likewise.
* util/grub-probe.c (probe): Probe for filesystem UUID when requested
via PRINT_FS_UUID.
(main): Recognise `-t fs_uuid' argument.
* util/biosdisk.c (map): Redefine structure to hold information
about GRUB drive name.
(get_drive): Reimplement without assuming (and verifiing) BIOS-like
drive names.
(call_hook): Remove.
(grub_util_biosdisk_iterate): Access drive names via `.drive' struct
member. Assume drive has partitions.
(grub_util_biosdisk_open): Access device names via `.device' struct
member.
(open_device): Likewise.
(find_drive): Likewise.
(read_device_map): Adjust map[] usage to match the new struct
definition. Don't check for duplicates (still possible, but not cheap
anymore).
(grub_util_biosdisk_fini): Free malloced buffers referenced by map[].
(make_device_name): Remove assumption of BIOS-like drive names.
* util/biosdisk.c: [__CYGWIN__] Add includes.
(grub_util_biosdisk_open): Use Linux code also for Cygwin.
(get_os_disk): Move variable declarations to OS specific
parts to avoid warning.
[__GNU__] (get_os_disk): Fix /dev/sdXsN case.
[__CYGWIN__] (get_os_disk): Add Cygwin /dev/sdXN device names.
(grub_util_biosdisk_get_grub_dev): Use Linux code also for
Cygwin.
* util/getroot.c: [__CYGWIN__] Add includes.
(strip_extra_slashes): Fix "/" case.
[__CYGWIN__] (get_win32_path): New function.
[__CYGWIN__] (grub_get_prefix): Add conversion to win32 path.
[__CYGWIN__] (find_root_device): Disable.
[__CYGWIN__] (get_bootsec_serial): New function.
[__CYGWIN__] (find_cygwin_root_device): Likewise.
[__linux__] (grub_guess_root_device): Add early returns to simplify
structure.
[__CYGWIN__] (grub_guess_root_device): Call find_cygwin_root_device.
[__linux__] (grub_util_get_dev_abstraction): Enable LVM and RAID
check for Linux only.
* util/biosdisk.c (get_os_disk): Recognise xvd type disks.
* util/grub-mkdevicemap.c (get_xvd_disk_name): New function.
(make_device_map): Output entries for xvd type disks.
* util/update-grub_lib.in (make_system_path_relative_to_its_root):
Do not print a trailing slash (therefore, the root directory is an
empty string).
(convert_system_path_to_grub_path): Do not remove trailing slash
from make_system_path_relative_to_its_root() output.
* util/i386/pc/grub-install.in: Add trailing slash to output from
make_system_path_relative_to_its_root().
* util/grub-fstest.c (grub_refresh): Call `fflush (stdout)'. This
ensures that output lines aren't intermangled with those sent to
stderr (via grub_util_info()).
* util/grub-probe.c (grub_refresh): Likewise.
* util/i386/pc/grub-setup.c (grub_refresh): Likewise.
Based on patch from Fabian Greffrath <greffrath@leat.rub.de>
* util/grub.d/10_linux.in: Add ${GRUB_CMDLINE_LINUX_DEFAULT} to the
first boot option.
* util/update-grub.in: Export GRUB_CMDLINE_LINUX_DEFAULT.
* util/i386/pc/grub-mkrescue.in: Add --emulation=floppy
to create a floppy emulation boot CD when non emulation mode
does not work.
Enable Joliet CD filesystem extension.
* util/grub.d/30_os-prober.in: New script. Use `os-prober' and
`linux-boot-prober' (if installed) to detect other operating
systems which are installed on the computer and add them to
the boot menu.
* conf/common.rmk: Build and install 30_os-prober.
Revert grub/machine/init.h addition by Pavel (since it breaks on
i386-ieee1275 and others):
* util/i386/pc/misc.c: Remove grub/machine/init.h.
* util/powerpc/ieee1275/misc.c: Likewise.
* util/biosdisk.c: Include grub/util/biosdisk.h.
* util/grub-fstest.c (execute_command): Make static.
* util/grub-mkdevicemap.c (check_device): Likewise.
* util/i386/pc/misc.c: Include grub/machine/init.h.
* util/powerpc/ieee1275/misc.c: Likewise.
* util/lvm.c: Include grub/util/lvm.h.
* util/misc.c: Include grub/kernel.h, grub/misc.h and
grub/cache.h.
* util/raid.c: Include grub/util/raid.h.
(grub_util_getdiskname): Make static.
* util/grub-emu.c (main): Remove calls to grub_hostfs_init() and
grub_hostfs_fini(), as they are called from grub_init_all() and
grub_fini_all() respectively. This fixes an infinite loop in
grub-fstest due to double registration of hostfs.
Reported by Christian Franke <Christian.Franke@t-online.de>
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_find_options):
Fix signedness warnings.
* kern/powerpc/ieee1275/openfw.c (grub_available_iterate):
Likewise.
* util/ieee1275/get_disk_name.c: Include config.h so that
_GNU_SOURCE is defined and getline() is declared. Mark an
unused argument as such. Fix a signedness warning.
* util/grub-fstest.c (cmd_cmp): Use fseeko(), not fseek(). The
later is obsolete, potentially dangerous and sets a bad example.
* util/i386/efi/grub-mkimage.c (make_header): Likewise.
* util/misc.c (grub_util_get_image_size): Likewise.
* fs/udf.c (grub_udf_mount): Fix warning about a shadowing a
variable.
* include/grub/i386/loader.h: Change declaration of
grub_linux_boot() to match what grub_loader_set() expects.
* util/getroot.c (grub_guess_root_device): Return const char* to
fix a warning.
* util/grub-probe.c (probe): Fix a warning about uninitialized
abstraction_name variable.
* util/i386/get_disk_name.c (grub_util_get_disk_name): Mark
second argument as unused to fix a warning.
* util/update-grub.in: Reorganise terminal validity check. Accept
`ieee1275:console' (OLPC) and `*:gfxterm' as valid too.
Based on suggestion by Franklin PIAT.
* include/grub/util/getroot.h (grub_util_check_block_device): Export new
function.
* util/getroot.c (grub_util_check_block_device): New function that
returns the given argument if it is a block device and returns NULL else.
* util/grub-probe.c (argument_is_device): New variable.
(probe): Promote device_name from a variable to an argument. Receive
device_name from grub_util_check_block_device() if path is NULL and from
grub_guess_root_device() else. Do not free() device_name anymore.
(options): Introduce new parameter '-d, --device'.
(main): Add description of the new parameter to the help screen.
Rename path variable to argument. Set argument_is_device if the '-d'
option is given. Pass argument to probe() depending on
argument_is_device.
* partmap/gpt.c: Include `<grub/gpt_partition.h>'.
(grub_gpt_partition_type_empty): Redefine with macro from
`<grub/gpt_partition.h>'.
(gpt_partition_map_iterate): Adjust partition type comparison.
Export `entry' as partmap-specific `part.data' struct.
(grub_gpt_header, grub_gpt_partentry): Move from here ...
* include/grub/gpt_partition.h (grub_gpt_header)
(grub_gpt_partentry): ... to here (new file).
* util/i386/pc/grub-setup.c: Include `<grub/gpt_partition.h>'.
(grub_gpt_partition_type_bios_boot): New const variable, defined
with macro from `<grub/gpt_partition.h>'.
(setup): Replace `first_start' with `embed_region', which keeps
track of the embed region (and is partmap-agnostic).
Replace find_first_partition_start() with find_usable_region(),
which finds a usable region for embedding using partmap-specific
knowledge (supports PC/MSDOS and GPT).
Fix all assumptions that the embed region start at sector 1, using
`embed_region.start' from now on. Similarly, use `embed_region.end'
rather than `first_start' to calculate available size.
In grub_util_info() message, replace "into after the MBR" with an
indication of the specific sector our embed region starts at.
* util/i386/pc/grub-setup.c (setup): In find_first_partition_start(),
do not assume partition map is PC/MSDOS before performing checks that
are specific to that layout.
* util/getroot.c (grub_guess_root_device): Inspect /dev/evms before
/dev (like it is done for /dev/mapper). This doesn't provide support
for EVMS, but at least it is now easy to identify the problem when it
arises.
* util/biosdisk.c (grub_util_biosdisk_open, linux_find_partition)
(grub_util_biosdisk_get_grub_dev): Check open() exit status by
comparing it with -1, not 0.
* configure.ac: Probe for `help2man'.
* Makefile.in (builddir): New variable.
(HELP2MAN): Likewise. Set to `true' when @HELP2MAN@ doesn't provide it,
or otherwise add a few flags/options to it.
(install-local): For every executable utility or script that is
installed, invoke $(HELP2MAN) to install a manpage based on --help
output.
* util/i386/pc/grub-install.in: Move down `update-grub_lib' sourcing, so
that it doesn't prevent --help from working in build tree.
* util/i386/pc/grub-mkrescue.in (usage): Replace `grub-devel@gnu.org'
with `bug-grub@gnu.org'.
* util/powerpc/ieee1275/grub-mkrescue.in (usage): Likewise.
* util/update-grub.in (usage): New function.
Implement proper argument check, with support for --help and --version
(as well as existing -y).
* disk/lvm.c [GRUB_UTIL] (grub_lvm_memberlist): New function. Construct
and return a grub_diskmemberlist_t composed of LVM physical volumes.
[GRUB_UTIL] (grub_lvm_dev): Add `memberlist' member.
* disk/raid.c [GRUB_UTIL] (grub_raid_memberlist): New function. Construct
and return a grub_diskmemberlist_t composed of physical array members.
[GRUB_UTIL] (grub_raid_dev): Add `memberlist' member.
* include/grub/disk.h [GRUB_UTIL] (grub_disk_memberlist): New struct
prototype.
[GRUB_UTIL] (struct grub_disk_dev): Add `memberlist' function pointer.
[GRUB_UTIL] (struct grub_disk_memberlist): New struct declaration.
[GRUB_UTIL] (grub_disk_memberlist_t): New typedef.
* util/grub-probe.c (probe): Move partmap probing code from here ...
(probe_partmap): ... to here.
(probe): Use probe_partmap() once for the disk we're probing, and
additionally, when such disk contains a memberlist() struct member,
once for each disk that is contained in the structure returned by
memberlist().
* util/grub-probe.c (main): When `verbosity > 1', set `debug'
environment variable to 'all' in order to obtain debug output from
non-util/ code.
* util/i386/pc/grub-setup.c (main): Likewise.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): Get physical
address of entry.
(grub_multiboot_load_elf64): Likewise.
(grub_multiboot): Initialize mbi structure.
* util/grub-fstest.c: Don't include unused header file script.h.
* conf/common.rmk (grub-fstest.c_DEPENDENCIES): Move to the begginning
of file.
(grub_fstest_SOURCES): Likewise.
Make grub-setup handle a separate root device.
* util/i386/pc/grub-setup.c (setup): Always open the root device,
so that the root device can be compared with the destination
device.
When embedding the core image, if the root and destination devices
are different, set ROOT_DRIVE to ROOT_DEV->DISK->ID. Otherwise, to
0xFF.
When not embedding, set ROOT_DRIVE to 0xFF.
* util/powerpc/ieee1275/grub-mkrescue.in: New file.
* conf/powerpc-ieee1275.rmk: Add grub-mkrescue support for
PowerPC.
* DISTLIST: Add util/powerpc/ieee1275/grub-mkrescue.in.
to create a gap between _end and the modules added to the image
with grub-mkrescue. That fixes "CLAIM failed" on PowerMAC.
* kern/powerpc/ieee1275/init.c: Use GRUB_MOD_GAP.
* util/elf/grub-mkimage.c (add_segments): Likewise.
* kern/i386/pc/init.c (make_install_device): When memdisk image is
present, "(memdisk)/boot/grub" becomes the default prefix.
* util/i386/pc/grub-mkrescue.in: Switch to a minimal core.img plus
a memdisk tarball with all the modules. Add --overlay=DIR option that
allows users to overlay additional files into the image.
* conf/i386-pc.rmk (GRUB_MEMORY_MACHINE_LINK_ADDR): New variable.
(kernel_img_LDFLAGS): Use `GRUB_MEMORY_MACHINE_LINK_ADDR' as link
address.
(grub_mkimage_CFLAGS): Propagate `GRUB_MEMORY_MACHINE_LINK_ADDR' as
a C macro.
* include/grub/i386/pc/memory.h (GRUB_MEMORY_MACHINE_UPPER): New macro.
Indicates start of upper memory.
* util/i386/pc/grub-mkimage.c: Include `<grub/machine/memory.h>'.
(generate_image): Abort when image size is big enough to corrupt
upper memory.
* include/grub/i386/pc/vga.h: Include `<grub/machine/memory.h>'.
(GRUB_MEMORY_MACHINE_VGA_ADDR): Alias for `GRUB_MEMORY_MACHINE_UPPER'.
* term/i386/pc/vga.c (VGA_MEM): Use `GRUB_MEMORY_MACHINE_VGA_ADDR'
instead of hardcoding 0xA0000.
* video/i386/pc/vbe.c: Include `<grub/machine/vga.h>'.
(grub_vbe_set_video_mode): Use `GRUB_MEMORY_MACHINE_VGA_ADDR'
instead of hardcoding 0xA0000.
* conf/i386-pc.rmk (kernel_img_HEADERS): Add `machine/kernel.h'.
(pkglib_MODULES): Add `memdisk.mod'.
(memdisk_mod_SOURCES): New variable.
(memdisk_mod_CFLAGS): Likewise.
(memdisk_mod_LDFLAGS): Likewise.
* disk/memdisk.c: New file.
* include/grub/disk.h (grub_disk_dev_id): Add
`GRUB_DISK_DEVICE_MEMDISK_ID'.
* include/grub/i386/pc/kernel.h
(GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE): New macro.
(GRUB_KERNEL_MACHINE_PREFIX): Increment by 4.
(grub_kernel_image_size): New variable declaration.
(grub_total_module_size): Likewise.
(grub_memdisk_image_size): Likewise.
* include/grub/i386/pc/memory.h
(GRUB_MEMORY_MACHINE_DECOMPRESSION_ADDR): New macro.
* include/grub/kernel.h: Include `<grub/symbol.h>'.
(grub_arch_memdisk_addr): New variable declaration.
(grub_arch_memdisk_size): Likewise.
* kern/i386/pc/init.c (grub_arch_memdisk_addr): New function.
(grub_arch_memdisk_size): Likewise.
* kern/i386/pc/startup.S (grub_memdisk_image_size): New variable.
(codestart): Replace hardcoded `0x100000' with
`GRUB_MEMORY_MACHINE_DECOMPRESSION_ADDR' macro.
* util/i386/pc/grub-mkimage.c: Include `<grub/misc.h>'.
(generate_image): Add `memdisk_path' parameter. When `memdisk_path' is
not NULL, append the contents of the file it refers to, at the end of
the compressed kernel image. Initialize `grub_memdisk_image_size'
variable (at `GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE' offset).
(options): Add "memdisk"|'m' option.
(main): Parse --memdisk|-m option, and pass user-provided path as
parameter to generate_image().
* include/grub/util/getroot.h (grub_dev_abstraction_types): New enum.
(grub_util_get_dev_abstraction): New function prototype.
* util/getroot.c: Include `<grub/util/getroot.h>'
(grub_util_get_grub_dev): Move detection of abstraction type to ...
(grub_util_get_dev_abstraction): ... here (new function).
* util/grub-probe.c: Convert PRINT_* to an enum. Add
`PRINT_ABSTRACTION'.
(probe): Probe for abstraction type when requested.
(main): Understand `--target=abstraction'.
* util/i386/efi/grub-install.in: Add abstraction module to core
image when it is found to be necessary.
* util/i386/pc/grub-install.in: Likewise.
* util/powerpc/ieee1275/grub-install.in: Likewise.
* util/update-grub_lib.in (font_path): Return system path without
converting to GRUB path.
* util/update-grub.in: Convert system path returned by font_path()
to a GRUB path. Use `grub-probe -t abstraction' to determine what
abstraction module is needed for loading fonts (if any). Export
that as `GRUB_PRELOAD_MODULES'.
* util/grub.d/00_header.in: Process `GRUB_PRELOAD_MODULES' (print
insmod commands).
* util/update-grub_lib.in (grub_file_is_not_garbage): New function.
Determines if a file is garbage left by packaging systems, etc.
* util/update-grub.in: Use grub_file_is_not_garbage() as a condition
for processing /etc/grub.d scripts.
* util/grub.d/10_hurd.in: Fix `GRUB_DISTRIBUTOR' comparison.
* util/grub.d/10_linux.in: Likewise. Use grub_file_is_not_garbage()
as a condition for processing Linux images.
* kern/i386/linuxbios/init.c: Put "void" to all function
declarations with no arguments.
* kern/powerpc/ieee1275/init.c: Likewise.
* term/i386/pc/at_keyboard.c: Likewise.
* term/i386/pc/vga_text.c: Likewise.
* util/grub-mkdevicemap.c: Likewise.
* configure.ac: Search for possible unifont.hex locations, and
define UNIFONT_HEX if found.
* Makefile.in (UNIFONT_HEX): Define variable.
(DATA): Rename to ...
(PKGLIB): ... this. Update all users.
(PKGDATA): New variable.
(pkgdata_IMAGES): Rename to ...
(pkglib_IMAGES): ... this. Update all users.
(pkgdata_MODULES): Rename to ...
(pkglib_MODULES): ... this. Update all users.
(pkgdata_PROGRAMS): Rename to ...
(pkglib_PROGRAMS): ... this. Update all users.
(pkgdata_DATA): Rename to ...
(pkglib_DATA): ... this. Update all users.
(CLEANFILES): Redefine to `$(pkglib_DATA) $(pkgdata_DATA)'.
(unicode.pff, ascii.pff): New rules.
(all-local): Add `$(PKGDATA)' dependency.
(install-local): Process `$(PKGDATA)'.
* util/update-grub_lib.in (font_path): Search for *.pff files in
a few more locations, including `${pkgdata}'.
* util/grub-mkdevicemap.c (make_device_map): Iterate up to 20 for
IDE disk check, since Linux is known to support 20 IDE disks.
Reported by Colin Watson.
* util/console.c (grub_ncurses_getkey): Change curses KEY_* mapping,
now return control chars instead of GRUB_CONSOLE_KEY_* constants.
This fixes the problem that function keys did not work in grub-emu.
* geninitheader.sh: Process file specified in first parameter rather
than hardcoding grub_modules_init.lst.
* geninit.sh: Likewise. Also, construct header name dynamicaly rather
than hardcoding grub_modules_init.h.
* conf/common.rmk: Rename grub_modules_init.[ch] files associated with
grub-emu to grub_emu_init.[ch]. Add rules to build analogous
grub_probe_init.[ch] and grub_setup_init.[ch].
* conf/powerpc-ieee1275.rmk (grub_emu_DEPENDENCIES): Replace
grub_modules_init.h with grub_emu_init.h.
(grub_probe_DEPENDENCIES, grub_probe_SOURCES): Add new
grub_probe_init.[ch] files.
* conf/i386-efi.rmk: Likewise.
* conf/i386-pc.rmk: Likewise.
(grub_setup_DEPENDENCIES, grub_setup_SOURCES): Add new
grub_setup_init.[ch] files.
* util/grub-emu.c: Replace grub_modules_init.h with grub_emu_init.h.
* util/grub-probe.c: Include grub_probe_init.h. Use grub_init_all()
to initialize modules rather than a list of hardcoded functions.
* util/i386/pc/grub-setup.c: Include grub_setup_init.h. Use
grub_init_all() to initialize modules rather than a list of hardcoded
functions.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): Add
GRUB_IEEE1275_FLAG_BROKEN_OUTPUT flag.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_find_options): Set this
flag when running on SmartFirmware.
* term/ieee1275/ofconsole.c (grub_ofconsole_init): Avoid running
"output-device output" command when GRUB_IEEE1275_FLAG_BROKEN_OUTPUT
was set.
* kern/powerpc/ieee1275/openfw.c (grub_ieee1275_encode_devname):
Increase partno when GRUB_IEEE1275_FLAG_0_BASED_PARTITIONS flag is set,
rather than decreasing it.
* util/i386/pc/grub-setup.c (setup): When embedding is required, but
there's not enough space to do it, fail in the same way as when it
can't be done because there are no partitions.
* util/powerpc/ieee1275/grub-install.in: Improve error message shown
when nvsetenv failed.
* util/i386/efi/grub-install.in: Allow `grub_probe --target=partmap'
invocation to fail, in order to support partition-less media.
* util/i386/pc/grub-install.in: Likewise.
* util/powerpc/ieee1275/grub-install.in: Use grub-probe to determine
which fs or partmap modules are needed (akin to its sister scripts).
Also use grub-probe to get rid of unportable /proc/mounts check.
Print the same informational message that the other scripts do, before
exitting.
* util/update-grub_lib.in (font_path): New function. Determine wether
a font file can be found and, if so, echo the GRUB path to it.
* util/update-grub.in: Handle multiple terminals depending on user
input, platform availability and font file presence. Propagate
variables of our findings to /etc/grub.d/ children.
* util/grub.d/00_header.in: Handle multiple terminals, based on
environment setup by update-grub.
* util/update-grub_lib.in (convert_system_path_to_grub_path): Split
code to make path relative to its root into a separate function.
* util/i386/pc/grub-install.in: Use newly provided
make_system_path_relative_to_its_root() to convert ${grubdir}, then
pass the result to grub-install --prefix.
that I forgot to apply before.
* include/grub/i386/pc/kernel.h: Define GRUB_KERNEL_MACHINE_DATA_END to
indicate end of data section in kernel image.
* include/grub/i386/efi/kernel.h: Define GRUB_KERNEL_MACHINE_PREFIX and
GRUB_KERNEL_MACHINE_DATA_END.
* kern/i386/pc/startup.S: Do not initialize grub_prefix, only reserve
space for it.
* kern/i386/efi/startup.S: Likewise.
* util/i386/pc/grub-mkimage.c: Initialize grub_prefix to /boot/grub
during image generation. Implement --prefix option to override this
patch.
* util/i386/efi/grub-mkimage.c: Likewise.
* util/update-grub_lib.in (convert_system_path_to_grub_path): Split
code to make path relative to its root into a separate function.
* util/i386/pc/grub-install.in: Use newly provided
make_system_path_relative_to_its_root() to convert ${grubdir}, then
pass the result to grub-install --prefix.
* include/grub/util/misc.h: Define DEFAULT_DIRECTORY and
DEFAULT_DEVICE_MAP.
* util/grub-emu.c: Use above definitions from misc.h instead of
defining them.
* util/grub-mkdevicemap.c: Likewise.
* util/i386/pc/grub-setup.c: Likewise.
* util/grub-probe.c: Likewise.
(probe): Abort with grub_util_error() when either
grub_guess_root_device or grub_util_get_grub_dev fails.
* normal/command.c (grub_command_execute): Use NULL rather than 0 for
"pager" assignment.
* util/biosdisk.c (grub_util_biosdisk_get_grub_dev): Likewise for
"pcdata".
* util/grub-probe.c (probe): Likewise for "drive_name".
* util/i386/pc/grub-mkrescue.in: Add "set -e".
Add --pkglibdir=DIR option to override pkglibdir.
Mention --image-type=TYPE in help output.
Fix --grub-mkimage (it was a no-op).
Abort gracefuly when no parameter is given.
* util/update-grub_lib.in (convert_system_path_to_grub_path): Abort if
file doesn't exist, or if it is in a filesystem grub can't read.
* util/update-grub.in: Set fallback for GRUB_FS check to "unknown". Do
not abort if GRUB_DRIVE could not be defined. Rearrange generated
header comment to fit in 80 columns when the variables are resolved.
* util/grub.d/00_header.in: Only set root variable when GRUB_DRIVE
could be identified by update-grub. Remove redundant check for
unifont.pff existance (since convert_system_path_to_grub_path now
handles that).
* conf/powerpc-ieee1275.rmk: Enable grub-mkdevicemap and grub-probe.
* include/grub/partition.h: Declare grub_apple_partition_map_init and
grub_apple_partition_map_fini.
* util/biosdisk.c
(grub_util_biosdisk_open): Replace BLKGETSIZE with BLKGETSIZE64 (needed
to access >2 TiB disks).
Print disk->total_sectors with %llu instead of %lu, since this
variable is always 64-bit (prevents wrong disk size from being displayed
on either >2 TiB disk or big-endian CPU).
(grub_util_biosdisk_get_grub_dev): Convert gpt_partition_map handling
into a generic case that supports all (sane) partition maps.
Stop using grub_cpu_to_le32() on dos_part / bsd_part since it actually
breaks big-endian.
* util/grub-probe.c: Call grub_apple_partition_map_init() before probe()
and grub_apple_partition_map_fini() after that.
* util/update-grub_lib.in: New file.
* DISTLIST: Add update-grub_lib.in.
* conf/common.rmk: Generate update-grub_lib and install it in
$(lib_DATA).
* Makefile.in: Add install routine for $(lib_DATA).
* util/grub.d/00_header.in: Use convert_system_path_to_grub_path()
function provided by update-grub_lib to support arbitrary paths of
unifont.pff.
* util/update-grub.in: Use convert_system_path_to_grub_path() to
initialize GRUB_DRIVE_BOOT and GRUB_DRIVE_BOOT_GRUB variables.
* util/biosdisk.c (linux_find_partition): Allocate real_dev on the
stack instead of on the heap.
* kern/disk.c (grub_disk_read): Make sure tmp_buf is big enough
before doing a read on it.
* configure.ac: Only use -fno-stack-protector for the target
environment.
* util/getroot.c (grub_guess_root_device): Remove RAID and LVM
code, first search for device in /dev/mapper, then in /dev.
(grub_util_get_grub_dev): New function.
* include/grub/util/getroot.h (grub_util_get_grub_dev): Add
prototype.
* util/grub-probe.c (probe): Remove check for RAID, call
grub_util_get_grub_dev() instead of
grub_util_biosdisk_get_grub_dev().
* util/grub-emu.c (main): Call grub_util_get_grub_dev() instead of
grub_util_biosdisk_get_grub_dev().
* util/i386/pc/grub-setup.c (main): Likewise.
* DISTLIST: Update for the latest changes.
* conf/i386-pc.rmk: Use the new paths for util/getroot.c,
util/grub-mkdevicemap.c, util/grub-probe.c and util/biosdisk.c.
* util/grub-emu.c: Replace grub/i386/pc/util/biosdisk.h with
grub/util/biosdisk.h.
* util/i386/pc/grub-setup.c: Replace grub/machine/util/biosdisk.h with
grub/util/biosdisk.h.
* include/grub/i386/pc/util/biosdisk.h: Moved to ...
* include/grub/util/biosdisk.h: ... here.
* util/i386/pc/biosdisk.c: Moved to ...
* util/biosdisk.c: ... here.
* util/i386/pc/getroot.c: Moved to ...
* util/getroot.c: ... here.
* util/i386/pc/grub-mkdevicemap.c: Moved to ...
* util/grub-mkdevicemap.c: ... here.
* util/i386/pc/grub-probe.c: Moved to ...
* util/grub-probe.c: ... here.
* util/update-grub.in: Fix a few assumptions about the devices holding
/, /boot and /boot/grub being the same.
* util/grub.d/00_header.in: Likewise.
* util/grub.d/10_hurd.in: Likewise.
* util/grub.d/10_linux.in: Likewise.
* util/grub.d/10_linux.in: Implement Linux image sorting with arbitrary
patterns. Use that to define the `.old' suffix as older than `'.
* util/grub.d/00_header.in: Set default gfxmode to `800x600x16'.
* util/update-grub.in: Add a reference to ${sysconfdir}/default/grub in
the grub.cfg header message.
* util/update-grub.in: Create device.map if it doesn't already exist,
before attempting to run grub-probe.
Check for grub-probe and grub-mkdevicemap with the same code
grub-install is using.
Remove test mode.
* util/i386/pc/grub-probe.c: Add `grub-probe -t partmap' parameter to
determine partition map module.
* util/i386/pc/grub-install.in: Use this feature to decide which
partition module to load, instead of hardcoding pc and gpt.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add partmap/gpt.c.
(grub_probe_SOURCES): Likewise.
* util/i386/pc/biosdisk.c (grub_util_biosdisk_get_grub_dev): Detect
GPT and initialize dos_part and bsd_part accordingly.
* util/i386/pc/grub-setup.c (setup): Ditto for install_dos_part and
install_bsd_part.
(main): Activate gpt module for use during partition identification,
and deactivate it afterwards.
* util/i386/pc/grub-install.in: Add gpt module to core.img.
* util/i386/pc/grub-probe.c (main): Activate gpt module for use during
partition identification, and deactivate it afterwards.
* util/grub-emu.c: Move initialization functions
grub_util_biosdisk_init() and grub_init_all() before
grub_util_biosdisk_get_grub_dev(), which relies on them.
./configure --program-transform-name="s/grub/grub2/"
And the installed files (in this case for i386-pc) will be:
/usr/lib/grub2/i386-pc/*
/usr/local/sbin/grub2-emu
/usr/local/sbin/grub2-install
...etc
Also grub2-install place boot files in "/boot/grub2"
This allows easy integration into distributions as it allows grub2 to
sit side by side with a grub legacy install without.
* conf/powerpc-ieee1275.rmk (kernel_elf_LDFLAGS): Link at 64KB.
* kern/powerpc/ieee1275/init.c (_end): Add declaration.
(_start): Likewise.
(grub_arch_modules_addr): Return address after `_end'.
* util/powerpc/ieee1275/grub-mkimage.c: Include grub/misc.h.
(load_modules): Use new parameter as `p_paddr' and `p_vaddr'.
(add_segments): Calculate `_end' from phdr size and location.
(ALIGN_UP): Moved to ...
* include/grub/misc.h: here.
* include/grub/powerpc/ieee1275/kernel.h (GRUB_IEEE1275_MOD_ALIGN):
New macro.
(GRUB_IEEE1275_MODULE_BASE): Removed.
* include/grub/err.h (grub_err_t): Add `GRUB_ERR_MENU'.
* kern/env.c (grub_env_unset): Don't free the member `value' when
the type is GRUB_ENV_VAR_DATA, in this case it's a user defined
pointer.
* normal/main.c (current_menu): Removed.
(free_menu): Unset the `menu' environment variable.
(grub_normal_menu_addentry): Make use of the environment variable
`menu', instead of using the global `current_menu'. Allocate
memory for the sourcecode of this entry.
(read_config_file): New argument `nested', changed all callers.
Only in the case of a new context, initialize a new menu. Set the
`menu' environment variable.
(grub_normal_execute): Don't set and unset the environment
variable `menu' here anymore. Only free the menu when leaving the
context.
* util/i386/pc/biosdisk.c (linux_find_partition): Fixed a memory
leak.
* kern/disk.c (grub_disk_read): When there is a read error, always
try to read only the necessary data.
* conf/i386-pc.rmk (grub_probe_SOURCES): Add disk/lvm.c and
disk/raid.c.
* include/grub/disk.h [GRUB_UTIL] (grub_raid_init): New
prototype.
[GRUB_UTIL] (grub_raid_fini): Likewise.
[GRUB_UTIL] (grub_lvm_init): Likewise.
[GRUB_UTIL] (grub_lvm_fini): Likewise.
* util/i386/pc/grub-probe.c (probe): Check whether DEVICE_NAME is
RAID device and copy DEVICE_NAME to DRIVE_NAME in that case.
(main): Call grub_raid_init(), grub_lvm_init(), grub_lvm_fini()
and grub_raid_fini().
