previous patch increased the size of the RS code by 20 bytes (at
least with gcc-4.4), so increase this by 20 bytes to match.
(GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_PART): Likewise.
scratch area. Make sure to initialise chosen in standalone mode as
well as non-standalone.
Reported by: Robert Hooker and Andy Whitcroft.
Tested by: Andy Whitcroft.
comment. Add an extra layer of quotation, requiring the output of
this function to be used in a printf format string.
(gettext_printf): New function.
* util/grub.d/10_hurd.in: Use gettext_printf where appropriate.
Extract translatable strings from here-documents and use a temporary
variable instead, so that xgettext can find them.
* util/grub.d/10_kfreebsd.in: Likewise.
* util/grub.d/10_linux.in: Likewise.
* util/grub.d/20_linux_xen.in: Likewise.
* po/grub.d.sed: New file.
* po/Makefile.in.in ($(DOMAIN).pot-update): Extract gettext_printf
arguments. Set c-format flags on all strings extracted from
util/grub.d/ (xgettext refuses to include these itself for strings
it extracted from a shell file, but these really are c-format).
.mo/.mo.gz opening sequence to ...
(grub_mofile_open_lang): ... here.
(grub_gettext_init_ext): If opening ll_CC fails, try ll.
* util/grub.d/00_header.in (grub_lang): Include country part of
locale.
Reported by: Mario Limonciello.
* grub-core/loader/i386/bsd.c
(grub_cmd_freebsd_loadenv, grub_cmd_freebsd_module_elf): Check
whether kernel is loaded using grub_loader_is_loaded(), rather
than `kernel_type', which may still be `KERNEL_TYPE_NONE' under
certain error conditions.
* util/grub-probe.c (probe): Remember which disk was detected as
RAID (perhaps an LVM physical volume). Use that disk's raidname
rather than that of the top-level disk.
Remove byte-swapping function calls, which are not valid in
structure initialisers.
* grub-core/partmap/gpt.c (grub_gpt_partition_type_bios_boot): Make
non-const.
(GRUB_MOD_INIT): Byte-swap data1, data2, and data3 fields of
grub_gpt_partition_type_bios_boot.
[GRUB_MACHINE_MIPS_YEELOONG || GRUB_MACHINE_QEMU]: ifdef-ed out
(now unused).
(grub_keyboard_controller_init)
[GRUB_MACHINE_MIPS_YEELOONG || GRUB_MACHINE_QEMU]: Don't attempt to
read the initial state since controller isn't inited yet.
* grub-core/fs/udf.c (GRUB_UDF_LOG2_BLKSIZE): Removed.
(GRUB_UDF_BLKSZ): Removed.
(struct grub_udf_data): New field "lbshift" to hold the logical block
size of the file system in log2 format. All users updated.
(sblocklist): Change type to unsigned.
(grub_udf_mount): Change type of "sblklist" to unsigned.
Move AVDP search before VRS recognition, because the latter requires
knowledge of the logical block size, which is detected during the
former.
Detect and validate logical block size during AVDP search, adding
support for block sizes 512, 1024 and 4096.
Make VRS recognition independent of block size.
* include/grub/elfload.h (grub_elf32_size): New parameter. All users updated.
Return maximum segments alignment.
(grub_elf64_size): Likewise.
* kern/elf.c (grub_elf32_size): New parameter. All users updated.
Return maximum segments alignment.
(grub_elf64_size): Likewise.
* grub-core/loader/powerpc/ieee1275/linux.c:
(grub_linux_claimmap_iterate): New function. Uses the "available"property
in the "memory" node for memory allocation for kernel in the PowerPC loader.
(grub_linux_load32): Correctly find linux entry point offset.
(grub_linux_load64): Likewise.
On mips-yeeloong, build with -march=loongson2f when this flag is
available (GCC >= 4.4).
* conf/Makefile.common [COND_mips_yeeloong] (CFLAGS_PLATFORM): Remove
`-march=mips3'.
* configure.ac: For mips-yeeloong, add -march=loongson2f if available,
or otherwise add -march=mips3.
Reported by: Jordan Uggla
* grub-core/term/serial.c (grub_serial_terminfo_input_template): New
const.
(grub_serial_terminfo_output_template): Likewise.
(grub_cmd_serial): Register "serial" with terminfo.
(GRUB_MOD_INIT(serial)): Fill grub_serial_terminfo_input and
grub_serial_terminfo_output.
On Yeeloong, pass machine type information to Linux.
* grub-core/loader/mips/linux.c [GRUB_MACHINE_MIPS_YEELOONG]
(LOONGSON_MACHTYPE): New macro, set to
"machtype=lemote-yeeloong-2f-8.9inches".
[LOONGSON_MACHTYPE] (grub_cmd_linux): Pass LOONGSON_MACHTYPE as
additional argument to Linux.
* util/deviceiter.c (grub_util_iterate_devices): Increase SCSI
limit to 48 (to cope with Sun Fire X4500), and IDE limit to 96
(its SATA disks are detected as slaveless IDE master drives on
kFreeBSD).
Reported by Carsten Aulbert.
elements with invlid index.
* grub-core/disk/mdraid_linux.c (grub_mdraid_detect): Likewise.
* grub-core/disk/raid.c (insert_array): Automatically reallocate
members.
* include/grub/raid.h (grub_raid_member): New struct.
(grub_raid_array): Transform devices and start_sector into usage of
grub_raid_member. All users updated
(allocated_devs): New member.
* Makefile.util.def (libgrubkern.a): New library for grub kernel
components that depend on gnulib headers.
(libgrubmods.a): Renamed from earlier libgrub.a.
* conf/Makefile.common: Remove gnulib from *_LIBRARY flags.
(arguments): New member allow_floppy.
(argp_parser): Handle --allow-floppy.
(main): Pass allow_floppy.
* util/grub-install.in: New option --allow-floppy passed though to
grub-setup.
* grub-core/commands/acpihalt.c [GRUB_DSDT_TEST]: Include userspace
headers and add relevant defines. Don't include standard headers.
(main) [GRUB_DSDT_TEST]: New function.
* include/grub/acpi.h [GRUB_DSDT_TEST]: Don't include standard headers.
Don't declare functions.
* util/grub-mkconfig.in: Merge `GRUB_DISABLE_LINUX_RECOVERY' and
`GRUB_DISABLE_NETBSD_RECOVERY' into a single `GRUB_DISABLE_RECOVERY'
variable. All references updated.
* util/grub.d/10_kfreebsd.in: Support recovery boot entries.
* grub-core/disk/raid.c (grub_raid_getname) [GRUB_UTIL]: New function.
(insert_array): New argument raid.
* include/grub/disk.h (grub_disk_dev) [GRUB_UTIL]: New member raidname.
* include/grub/raid.h (grub_raid_array) [GRUB_UTIL]: New member driver.
* util/grub-probe.c (probe): PRint raidname instead of plainly "mdraid".
Tested by: decoder
Reported by: decoder and meta tech.
* grub-core/term/efi/console.c (grub_console_standard_color): Removed.
(grub_console_setcolorstate): Clear out 0x80 bit.
Use GRUB_TERM_DEFAULT_STANDARD_COLOR.
(grub_console_output): Use GRUB_TERM_DEFAULT_NORMAL_COLOR.
Use GRUB_TERM_DEFAULT_HIGHLIGHT_COLOR.
* gentpl.py: New groups terminfoinkernel and terminfomodule.
* grub-core/Makefile.am (KERNEL_HEADER_FILES): Include extcmd.h, arg.h
and terminfo.h when needed.
* grub-core/Makefile.core.def (kernel): Include term/terminfo.c,
term/tparm.c, commands/extcmd.c, lib/arg.c on terminfokernel.
(terminfo): Enable only on terminfokernel.
(extcmd): Likewise.
* include/grub/extcmd.h: Add missing EXPORT_FUNC.
* include/grub/lib/arg.h: Likewise.
* grub-core/term/ieee1275/ofconsole.c (grub_ofconsole_dimensions): Fix
incorrect usage of ->.
* grub-core/loader/i386/multiboot_mbi.c (grub_multiboot_get_mbi_size):
Take VBE info into account even if only text is supported.
(fill_vbe_info): Take into account the case when only VGA text
is supported.
* include/grub/multiboot.h (GRUB_MACHINE_HAS_VBE): Set to zero
on coreboot, multiboot and qemu.
* Makefile.util.def (grub-setup): Add grub-core/lib/reed_solomon.c.
* grub-core/Makefile.am (rs_decoder.S): New target.
(kern/i386/pc/startup.S): Depend on rs_decoder.S.
* grub-core/kern/i386/pc/startup.S (reed_solomon_redundancy): New field.
(multiboot): Move to RS part.
(post_reed_solomon): New label.
(grub_boot_drive): Move to non-RS part since it's modified in memory
on boot.
Include rs_decoder.S.
* grub-core/lib/reed_solomon.c: New file.
* include/grub/offsets.h (GRUB_KERNEL_I386_PC_REED_SOLOMON_REDUNDANCY):
New definition.
(GRUB_KERNEL_I386_PC_MULTIBOOT_SIGNATURE): Removed.
(GRUB_KERNEL_I386_PC_RAW_SIZE): Updated.
(GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_PART): New definition.
* include/grub/partition.h (grub_partition_map): Change prototype of
embed to allow returning additional sectors.
* include/grub/reed_solomon.h: New file.
* util/grub-setup.c (setup): Handle Reed-Solomon.
Support degraded ZFS arrays in "grub-probe -t device" resolution.
* grub-core/kern/emu/getroot.c (find_root_device_from_libzfs): When
the pool is an array of devices, iterate through it and return the
first device that passes a stat() test (instead of blindly returning
the first one).
Build fixes for GNU/kFreeBSD.
* Makefile.util.def: Add `$(LIBZFS) $(LIBNVPAIR)' library dependencies
to programs that require ZFS conversion.
* grub-core/kern/emu/hostdisk.c (grub_util_biosdisk_is_floppy): Support
kernels that don't have FLOPPY_MAJOR.
* autogen.sh: Create symlinks to ${GRUB_CONTRIB} if necessary to
avoid confusing Automake. Run autogen only twice, once for the top
level and once for grub-core. Add Makefile.util.def and
Makefile.core.def from extra modules to the appropriate autogen
invocations. If Makefile.common exists in an extra module, include
it in both Makefile.util.am and grub-core/Makefile.core.am;
similarly, include any Makefile.util.common file in Makefile.util.am
and any Makefile.core.common file in grub-core/Makefile.core.am.
* conf/Makefile.common ($(top_srcdir)/grub-core/Makefile.core.am):
Depend on $(top_srcdir)/grub-core/Makefile.gcry.def.
($(top_srcdir)/grub-core/Makefile.gcry.def): Remove.
* grub-core/Makefile.am: Remove inclusion of Makefile.gcry.am.
* gentpl.py (gvar_add): Turn GVARS into a set.
(global_variable_initializers): Sort global variables on output.
(vars_init): New function.
(first_time): Likewise.
(library): Ensure that non-global variable initialisations are
emitted before the first time we emit code for a library block.
Append to variables rather than setting them. Only emit
noinst_LIBRARIES, BUILT_SOURCES, and CLEANFILES the first time for
each conditional path.
(program): installdir() emits an Autogen macro, so must be passed to
var_add rather than gvar_add.
(data): Likewise.
(script): Likewise.
(rules): New function, centralising handling for different target
types. Set up Guile association lists for first_time and vars_init,
and send most output to a diversion so that variable initialisations
can be emitted first.
(module_rules): Use new rules function.
(kernel_rules): Likewise.
(image_rules): Likewise.
(library_rules): Likewise.
(program_rules): Likewise.
(script_rules): Likewise.
(data_rules): Likewise.
* configure.ac: Add AC_PROG_LN_S, for the benefit of ntldr-img.
* .bzrignore: Add contrib and grub-core/contrib. Remove
grub-core/Makefile.gcry.am.
* grub-core/loader/multiboot_mbi2.c (grub_multiboot_load): Declare
new tags as supported.
(acpiv2_size): New function.
(grub_multiboot_get_mbi_size): Take new tags into account.
(grub_multiboot_make_mbi): Add new tags.
* include/grub/multiboot.h (GRUB_MACHINE_HAS_ACPI): New definition.
convert partition names to disk names if the new `convert' parameter
is set.
(grub_util_biosdisk_get_grub_dev): If opening the disk device
returns GRUB_ERR_UNKNOWN_DEVICE, treat the partition device as a
disk in its own right. This can happen with Xen disk images.
* grub-core/commands/menuentry.c (grub_normal_add_menu_entry): New
parameter submenu. All users updated.
* grub-core/normal/main.c (free_menu): Rename to ...
(grub_normal_free_menu): ... this. Made global.
* grub-core/normal/menu.c (grub_menu_execute_entry): Open new context
if requested.
* grub-core/normal/menu_entry.c (screen): New field submenu.
(make_screen): Set submenu.
(run): Open new context if requested.
* include/grub/menu.h (grub_menu_entry): New field submenu.
* include/grub/normal.h (grub_normal_free_menu): New proto.
* Makefile.util.def (libgrub.a): Add grub-core/partmap/bsdlabel.c.
* grub-core/disk/efi/efidisk.c (grub_efidisk_get_device_name):
Properly handle concatenation.
* grub-core/kern/device.c (grub_device_iterate): Likewise.
* grub-core/normal/completion.c (iterate_partition): Likewise.
* grub-core/kern/disk.c (grub_disk_open): Make disk->name not
contain partition. All users updated.
* grub-core/partmap/bsdlabel.c (grub_netbsdlabel_partition_map): New
struct.
(grub_openbsdlabel_partition_map): Likewise.
(bsdlabel_partition_map_iterate): Rename to ..
(iterate_real): ... this. New arguments sector, freebsd and pmap.
(bsdlabel_partition_map_iterate): New function.
(netopenbsdlabel_partition_map_iterate): Likewise.
(netbsdlabel_partition_map_iterate): Likewise.
(openbsdlabel_partition_map_iterate): Likewise.
(GRUB_MOD_INIT): Register new partmaps.
(GRUB_MOD_FINI): Unregister new partmaps.
* grub-core/partmap/msdos.c (pc_partition_map_iterate): Rename to ...
(grub_partition_msdos_iterate): ... this. All users updated.
Don't support embedding other than in a minix partition.
* include/grub/msdos_partition.h (grub_partition_msdos_iterate): New
proto.
* include/grub/partition.h (grub_partition): New field msdostype.
* util/grub-install.in: Handle openbsd and netbsd types being in
part_bsd module.
as printf format strings; the translations might contain '%' which
could cause a crash.
(main): Likewise.
* util/grub-fstest.c (argp_parser): Likewise.
* util/grub-setup.c (argp_parser): Likewise.
(main): Likewise.
* grub-core/Makefile.core.def (lsefimmap): New module.
* include/grub/efi/api.h (PRIxGRUB_EFI_UINTN_T): New definition.
Also-By: Robert Millan <rmh.grub@aybabtu.com>
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
has a chance to see them.
* grub-core/kern/err.c (grub_err_printed_errors): New variable.
(grub_print_error): Increment grub_err_printed_errors.
* grub-core/normal/menu.c (grub_menu_execute_entry): Pause the
execution if any errors were displayed.
(show_menu): Remove old code for pause.
* grub-core/normal/menu_entry.c (run): Likewise.
* grub-core/normal/term.c (grub_normal_char_counter): Removed. All
users updated.
(grub_normal_get_char_counter): Likewise.
* include/grub/err.h (grub_err_printed_errors): New external variable.
* include/grub/normal.h (grub_normal_get_char_counter): Removed.
* grub-core/loader/i386/multiboot_mbi.c (grub_multiboot_get_mbi_size):
Take VBE info into account.
(fill_vbe_info) [GRUB_MACHINE_HAS_VBE]: New function.
(retrieve_video_parameters) [GRUB_MACHINE_HAS_VBE]:
Call fill_vbe_info when appropriate.
(grub_multiboot_make_mbi): Account for the size occupied by VBE info.
* grub-core/loader/multiboot_mbi2.c (grub_multiboot_load): Declare tags
as supported.
(grub_multiboot_get_mbi_size): Take new tags into account.
(fill_vbe_tag) [GRUB_MACHINE_HAS_VBE]: New function.
(retrieve_video_parameters) [GRUB_MACHINE_HAS_VBE]:
Call fill_vbe_tag when appropriate.
(grub_multiboot_make_mbi): Properly align tags.
* grub-core/video/i386/pc/vbe.c (grub_vbe_bios_get_pm_interface): New
function.
* include/grub/i386/pc/vbe.h (grub_vbe_bios_get_pm_interface): New
proto.
* include/grub/multiboot.h (GRUB_MACHINE_HAS_VBE): New definition.
* grub-core/term/ieee1275/ofconsole.c (grub_ofconsole_dimensions):
Save state in grub_ofconsole_terminfo_output.
(grub_ofconsole_term): Use grub_terminfo_getwh.
(grub_ofconsole_getwh): Removed.
* grub-core/term/serial.c (grub_serial_getwh): Removed.
(grub_serial_term): Use grub_terminfo_getwh.
* grub-core/term/terminfo.c (grub_terminfo_getwh): New function.
(options): New struct.
(OPTION_*): New enum.
(grub_cmd_terminfo): Transform into extcmd and handle new parameters.
* include/grub/terminfo.h (grub_terminfo_output_state): New fields
width and height.
(grub_terminfo_getwh): New proto.
* grub-core/lib/legacy_parse.c (grub_legacy_parse): Handle --lines.
* grub-core/lib/legacy_parse.c (legacy_command): New flags FLAG_TITLE
and FLAG_TERMINAL.
(legacy_commands): Add terminal and title.
(grub_legacy_parse): Handle terminal. Simplify title handling.
