* include/grub/i386/efi/machine.h: New file.
* include/grub/i386/linuxbios/machine.h: Likewise.
* include/grub/i386/pc/machine.h: Likewise.
* include/grub/powerpc/ieee1275/machine.h: Likewise.
* include/grub/sparc64/ieee1275/machine.h: Likewise.
* term/i386/pc/serial.c: Include <grub/machine/machine.h>.
(serial_hw_io_addr): New variable.
(serial_hw_get_port): Obtain port address from `serial_hw_io_addr'
instead of `(unsigned short *) 0x400'.
* term/i386/pc/vga_text.c: Include <grub/cpu/io.h>.
(CRTC_ADDR_PORT): New macro.
(CRTC_DATA_PORT): Likewise.
(CRTC_CURSOR): Likewise.
(CRTC_CURSOR_ADDR_HIGH): Likewise.
(CRTC_CURSOR_ADDR_LOW): Likewise.
(update_cursor): New function.
(grub_console_real_putchar): Call `update_cursor'.
(grub_console_gotoxy): Likewise.
(grub_console_cls): Set the default color when clearing the
screen.
(grub_console_setcursor): Implemented.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): Add
GRUB_IEEE1275_FLAG_BROKEN_OUTPUT flag.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_find_options): Set this
flag when running on SmartFirmware.
* term/ieee1275/ofconsole.c (grub_ofconsole_init): Avoid running
"output-device output" command when GRUB_IEEE1275_FLAG_BROKEN_OUTPUT
was set.
* kern/powerpc/ieee1275/openfw.c (grub_ieee1275_encode_devname):
Increase partno when GRUB_IEEE1275_FLAG_0_BASED_PARTITIONS flag is set,
rather than decreasing it.
* util/i386/pc/grub-setup.c (setup): When embedding is required, but
there's not enough space to do it, fail in the same way as when it
can't be done because there are no partitions.
* util/powerpc/ieee1275/grub-install.in: Improve error message shown
when nvsetenv failed.
* commands/blocklist.c: New file.
* DISTLIST: Added commands/blocklist.c.
* term/efi/console.c (grub_console_highlight_color): Use a lighter
color for the background, and a daker color for the foreground.
(grub_console_checkkey): Return READ_KEY.
(grub_console_cls): Set the background to
GRUB_EFI_BACKGROUND_BLACK temporarily to clean out the screen.
* kern/efi/efi.c (grub_efi_exit_boot_services): New function.
* include/grub/i386/linux.h (struct linux_kernel_params): Fixed
the size of "padding5", "hd0_drive_info" and "hd1_drive_info".
* include/grub/efi/efi.h (grub_efi_exit_boot_services): New
prototype.
* include/grub/efi/api.h (GRUB_EFI_TEXT_ATTR): Do not shift
BG. The spec is wrong again.
* include/grub/normal.h [GRUB_UTIL] (grub_blocklist_init): New
prototype.
[GRUB_UTIL] (grub_blocklist_fini): Likewise.
* conf/i386-pc.rmk (grub_emu_SOURCES): Added
commands/blocklist.c.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Likewise.
* conf/common.rmk (pkgdata_MODULES): Added blocklist.mod.
(blocklist_mod_SOURCES): New variable.
(blocklist_mod_CFLAGS): Likewise.
(blocklist_mod_LDFLAGS): Likewise.
Extend the loader so that GRUB can accept a loader which comes
back to GRUB when a loaded image exits. Also, this change adds
support for a chainloader on EFI.
* term/efi/console.c: Include grub/misc.h.
(grub_console_checkkey): Display a scan code on the top for
debugging. This will be removed once the EFI port gets stable.
Correct the scan code mapping.
* kern/efi/mm.c (sort_memory_map): Sort in a descending order to
allocate memory from larger regions, in order to reduce the number
of allocated regions. Otherwise, the MacOSX loader panics.
(filter_memory_map): Avoid less than 1MB for compatibility with
other loaders.
(add_memory_regions): Allocate from the tail of a region, if
possible, to avoid allocating a region near to 1MB, for the MacOSX
loader.
* kern/efi/init.c (grub_efi_set_prefix): Specify
GRUB_EFI_IMAGE_HANDLE to grub_efi_get_loaded_image.
* kern/efi/efi.c (grub_efi_get_loaded_image): Accept a new
argument IMAGE_HANDLE and specify it to get a loaded image.
(grub_arch_modules_addr): Specify GRUB_EFI_IMAGE_HANDLE to
grub_efi_get_loaded_image.
(grub_efi_get_filename): Divide the legnth by the size of
grub_efi_char16_t.
(grub_efi_get_device_path): New function.
(grub_efi_print_device_path): Print End Device Path nodes. Divide
the length by the size of grub_efi_char16_t for a file path device
path node.
* kern/loader.c (grub_loader_noreturn): New variable.
(grub_loader_set): Accept a new argument NORETURN. Set
GRUB_LOADER_NORETURN to NORETURN.
All callers changed.
(grub_loader_boot): If GRUB_LOADER_NORETURN is false, do not call
grub_machine_fini.
* include/grub/efi/efi.h (grub_efi_get_device_path): New
prototype.
(grub_efi_get_loaded_image): Take an argument to specify an image
handle.
* include/grub/loader.h (grub_loader_set): Added one more argument
NORETURN.
* disk/efi/efidisk.c (make_devices): Use grub_efi_get_device_path
instead of grub_efi_open_protocol.
(grub_efidisk_get_device_name): Likewise.
(grub_efidisk_close): Print a newline.
(grub_efidisk_get_device_handle): Fixed to use
GRUB_EFI_DEVICE_PATH_SUBTYPE instead of
GRUB_EFI_DEVICE_PATH_TYPE.
* disk/efi/efidisk.c (device_path_guid): Moved to ...
* kern/efi/efi.c (device_path_guid): ... here.
* conf/i386-efi.rmk (pkgdata_MODULES): Added _chain.mod and
chain.mod.
(kernel_mod_HEADERS): Added efi/disk.h.
(_chain_mod_SOURCES): New variable.
(_chain_mod_CFLAGS): Likewise.
(_chain_mod_LDFLAGS): Likewise.
(chain_mod_SOURCES): Likewise.
(chain_mod_CFLAGS): Likewise.
(chain_mod_LDFLAGS): Likewise.
* DISTLIST: Added include/grub/efi/chainloader.h,
loader/efi/chainloader.c and loader/efi/chainloader_normal.c.
* include/grub/efi/chainloader.h: New file.
* loader/efi/chainloader.c: Likewise.
* loader/efi/chainloader_normal.c: Likewise.
* term/ieee1275/ofconsole.c (grub_ofconsole_cls): Use both the ANSI
escape sequence and a literal ^L to clear the screen.
* commands/ieee1275/suspend.c (grub_cmd_suspend): Clear the screen
when returning from Open Firmware.
* term/ieee1275/ofconsole.c (grub_ofconsole_width): New variable.
(grub_ofconsole_height): Likewise.
(grub_ofconsole_putchar): If `grub_curr_x' exceeds console width,
manually insert a '\n'.
(grub_ofconsole_getwh): Set and return `grub_ofconsole_width' and
`grub_ofconsole_height'. Return early if these are already set.
* kern/powerpc/ieee1275/init.c (grub_get_rtc): Initialize `msecs'
to 0.
* term/ieee1275/ofconsole.c (grub_ofconsole_checkkey): Return -1 if
there are no pending characters.
* kern/term.c (grub_putchar): Use grub_utf8_to_ucs4 for the
conversion.
(grub_getcharwidth): New function.
* kern/misc.c (grub_utf8_to_ucs4): New function.
* include/grub/term.h (struct grub_term): Added a new member
"getcharwidth".
(grub_getcharwidth): New prototype.
* include/grub/misc.h (grub_utf8_to_ucs4): New prototype.
* term/i386/pc/console.c (map_char): New function. Segregated from
grub_console_putchar.
(grub_console_putchar): Use map_char.
(grub_console_getcharwidth): New function.
(grub_console_term): Specified grub_console_getcharwidth as
getcharwidth.
* term/i386/pc/vga.c (grub_vga_getcharwidth): New function.
(grub_vga_term): Specified grub_vga_getcharwidth as getcharwidth.
* term/i386/pc/vesafb.c (grub_virtual_screen_setup): Return
GRUB_ERRNO.
(grub_vesafb_init): Do not use RC. Instead, use GRUB_ERRNO. Rely
on grub_strtoul completely.
(write_char): Declare local variables in the beginning of the
function.
(grub_vesafb_getcharwidth): New function.
(grub_vesafb_term): Specified grub_vesafb_getcharwidth as
getcharwidth.
* term/ieee1275/ofconsole.c: Include <grub/mm.h>.
(grub_ofconsole_getwh): Cast -1 to type grub_ieee1275_ihandle_t.
Pass 0 as `end' parameter to grub_strtoul().
* kern/term.c (grub_putcode): Use `grub_getwh' instead of
hardcoded value.
From Vincent Pelletier <subdino2004@yahoo.fr>
* include/grub/term.h (GRUB_TERM_WIDTH, GRUB_TERM_HEIGHT):
Redefined to use grub_getwh.
(grub_term): New member named getwh.
(grub_getwh): New prototype.
* kern/term.c (grub_getwh): New function.
* term/i386/pc/console.c (grub_console_getwh): New function.
(grub_console_term): New member `getwh'.
* term/i386/pc/vga.c (grub_vga_getwh): New function.
(grub_vga_term): New member `getwh'.
* term/sparc64/ofconsole.c (grub_ofconsole_readkey): Use
grub_ssize_t.
(grub_ofconsole_getw): New function.
(grub_ofconsole_init): Use grub_ssize_t and unsigned char.
(grub_ofconsole_term): New field named getwh and new initial
value.
* include/grub/powerpc/ieee1275/ieee1275.h: Move ...
* include/grub/ieee1275/ieee1275.h: ... to here. All users updated.
Move `abort', `grub_reboot', and `grub_halt' prototypes ...
* include/grub/powerpc/ieee1275/kernel.h: ... to here.
* commands/ieee1275/halt.c: Include <grub/machine/kernel.h> instead
of <grub/machine/ieee1275.h>.
* commands/ieee1275/reboot.c: Likewise.
* boot/powerpc/ieee1275/ieee1275.c: Move ...
* kern/ieee1275.c: ... to here. All users updated. Change all
parameter structs to use new type `grub_ieee1275_cell_t'.
* term/powerpc/ieee1275/ofconsole.c: Move ...
* term/ieee1275/ofconsole.c: ... to here. All users updated.
* disk/powerpc/ieee1275/ofdisk.c: Move ...
* disk/ieee1275/ofdisk.c: ... to here. All users updated.
* boot/powerpc/ieee1275/cmain.c: Change `grub_ieee1275_entry_fn' type
to return int.
* include/grub/i386/pc/console.h: Move to include/grub/console.h.
Remove unused prototypes. All users updated.
* include/grub/powerpc/ieee1275/console.h: Removed.
* include/grub/powerpc/ieee1275/ieee1275.h: Define
`grub_ieee1275_cell_t'.
* kern/powerpc/ieee1275/openfw.c: Include <grub/machine/kernel.h>.
Cast comparisons with -1 to the correct type.
* loader/powerpc/ieee1275/linux.c (kernel_entry_t): Change parameter
type to match `grub_ieee1275_entry_fn'.
* boot/powerpc/ieee1275/cmain.c (module_info): Remove definition.
(grub_ieee1275_chosen): New variable.
(cmain): Initialize and use `grub_ieee1275_chosen' instead of
`chosen'.
* boot/powerpc/ieee1275/crt0.S (init_stack): Remove stack space.
* boot/powerpc/ieee1275/ieee1275.c (grub_ieee1275_get_property):
Rename first argument to `phandle' for consistency.
(grub_ieee1275_get_property_length): Likewise.
(grub_ieee1275_next_property): Likewise. Change type of first argument
to grub_ieee1275_phandle_t.
* include/grub/powerpc/ieee1275/ieee1275.h (grub_ieee1275_entry_fn):
Move export next to declaration.
(grub_ieee1275_chosen): New variable.
* include/grub/powerpc/ieee1275/kernel.h (GRUB_IEEE1275_MODULE_BASE):
Correct cosmetic typo.
* kern/powerpc/ieee1275/init.c (grub_set_prefix): Use
`grub_ieee1275_chosen'.
* kern/powerpc/ieee1275/openfw.c (grub_map): Likewise.
* loader/powerpc/ieee1275/linux.c (grub_linux_boot): Likewise.
(grub_rescue_cmd_linux): Set `initrd_addr' to 0.
* term/powerpc/ieee1275/ofconsole.c (grub_ofconsole_refresh): Use
`grub_ieee1275_chosen'.
* include/grub/normal.h (grub_halt_init): New prototype.
(grub_halt_fini): Likewise.
(grub_reboot_init): Likewise.
(grub_reboot_fini): Likewise.
* util/grub-emu.c: Include signal.h.
(main_env): New global variable.
(grub_machine_init): Ignore SIGINT. Otherwise grub-emu cannot
catch C-c.
(grub_machine_fini): New function.
(main): Call grub_halt_init and grub_reboot_init before
grub_main, and grub_reboot_fini and grub_halt_fini after it.
Call setjmp with MAIN_ENV to go back afterwards.
Call grub_machine_fini right before return.
* include/grub/util/misc.h: Include setjmp.h.
(main_env): New prototype.
* include/grub/kernel.h (grub_machine_fini): New prototype.
* include/grub/i386/pc/biosdisk.h (grub_biosdisk_fini): Likewise.
* include/grub/i386/pc/console.h (grub_console_fini): Likewise.
* disk/i386/pc/biosdisk.c (grub_biosdisk_fini): New function.
* kern/i386/pc/init.c (grub_machine_fini): Likewise.
* term/i386/pc/console.c (grub_console_fini): Likewise.
* util/i386/pc/misc.c: New file.
* conf/i386-pc.rmk (grub_emu_SOURCES): Added
util/i386/pc/misc.c, commands/i386/pc/halt.c and
commands/i386/pc/reboot.c.
* term/i386/pc/vga.c (VGA_HEIGHT): Changed to 350.
(PAGE_OFFSET): New macro.
(CRTC_ADDR_PORT): Likewise.
(CRTC_DATA_PORT): Likewise.
(START_ADDR_HIGH_REGISTER): Likewise.
(START_ADDR_LOW_REGISTER): Likewise.
(GRAPHICS_ADDR_PORT): Likewise.
(GRAPHICS_DATA_PORT): Likewise.
(READ_MAP_REGISTER): Likewise.
(INPUT_STATUS1_REGISTER): Likewise.
(INPUT_STATUS1_VERTR_BIT): Likewise.
(page): New variable.
(wait_vretrace): New function.
(set_read_map): Likewise.
(set_start_address): Likewise.
(grub_vga_init): Use mode 0x10 instead of mode 0x12. Switch to
the right page.
(check_vga_mem): Take the page into account.
(write_char): Likewise.
(write_cursor): Likewise.
(scroll_up): Likewise. Copy the page to the page that is not
shown and switch between both pages.
(grub_vga_putchar): Fix off by one error.
(grub_vga_cls): Wait for the vertical retrace. Take the page into
account.
All symbols prefixed with PUPA_ and pupa_ are renamed to GRUB_
and grub_, respectively. Because the conversion is trivial and
mechanical, I omit the details here. Please refer to the CVS
if you need more information.
Add support for the newworld apple macintosh (PPC). This has been
tested on the powerbook 2000 only. It only adds support for
generic ieee1275 functions, console and disk support. This should
be easy to port to other architectures with support for Open
Firmware.
* configure.ac: Accept the powerpc as host_cpu. In the case of
the powerpc cpu set the host_vendor to ieee1275. Make sure the i386
specific tests are only executed while building for the i386.
Inverse test for crosscompile.
* genmk.rb (Utility): Allow assembler files.
* normal/cmdline.c (pupa_tab_complete): Reset pupa_errno.
* conf/powerpc-ieee1275.rmk: New file.
* disk/powerpc/ieee1275/ofdisk.c: Likewise.
* disk/powerpc/ieee1275/partition.c: Likewise.
* include/pupa/powerpc/ieee1275/biosdisk.h: Likewise.
* include/pupa/powerpc/ieee1275/console.h: Likewise.
* include/pupa/powerpc/ieee1275/partition.h: Likewise.
* include/pupa/powerpc/ieee1275/time.h: Likewise.
* include/pupa/powerpc/ieee1275/util/biosdisk.h: Likewise.
* include/pupa/powerpc/ieee1275/multiboot.h: Likewise.
* include/pupa/powerpc/ieee1275/loader.h
* include/pupa/powerpc/setjmp.h: Likewise.
* include/pupa/powerpc/types.h: Likewise.
* kern/powerpc/ieee1275/init.c: Likewise.
* kern/powerpc/ieee1275/openfw.c: Likewise.
* term/powerpc/ieee1275/ofconsole.c: Likewise.
These files were written by Johan Rydberg
(jrydberg@night.trouble.net) and I only modified them slightly.
* boot/powerpc/ieee1275/cmain.c: New file.
* boot/powerpc/ieee1275/crt0.S: Likewise.
* boot/powerpc/ieee1275/ieee1275.c: Likewise.
* include/pupa/powerpc/ieee1275/ieee1275.h: Likewise.
* commands/boot.c: New file.
* commands/cat.c: Likewise.
* commands/cmp.c: Likewise.
* commands/ls.c: Likewise.
* commands/terminal.c: Likewise.
* normal/command.c: Include <pupa/env.h> and <pupa/dl.h>.
(pupa_register_command): Changed interface to match the new
argument parser.
(pupa_command_execute): Changed (almost rewritten) so it uses
pupa_split_command. Added support for setting variables using the
syntax `foo=bar'.
(rescue_command): Changed to work with the new argument parser.
(terminal_command): Moved from here to commands/terminal.c.
(set_command): New function.
(unset_command): New function.
(insmod_command): New function.
(rmmod_command): New function.
(lsmod_command): New function.
(pupa_command_init): Don't initialize the command terminal
anymore. Initialize the commands set, unset, insmod, rmmod and
lsmod.
* conf/i386-pc.rmk (kernel_img_SOURCES): Add kern/env.c.
(kernel_img_HEADERS): Add arg.h and env.h.
(pupa_mkimage_LDFLAGS): Add kern/env.c.
(pupa_emu_SOURCES): Add kern/env.c, commands/ls.c,
commands/terminal.c commands/boot.c commands/cmp.c commands/cat.c,
normal/arg.c.
(pkgdata_MODULES): Add ls.mod, boot.mod, cmp.mod, cat.mod and
terminal.mod.
(normal_mod_SOURCES): Add normal/arg.c and normal/arg.c.
(boot_mod_SOURCES): New variable.
(terminal_mod_SOURCES): Likewise.
(ls_mod_SOURCES): Likewise.
(cmp_mod_SOURCES): Likewise.
(cat_mod_SOURCES): Likewise.
* normal/arg.c: New file.
* kern/env.c: Likewise.
* include/pupa/arg.h: Likewise.
* include/pupa/env.h: Likewise.
* font/manager.c (font_command): Changed to match argument parsing
interface changes.
(PUPA_MOD_INIT): Likewise.
* hello/hello.c (pupa_cmd_hello): Likewise.
(PUPA_MOD_INIT): Likewise.
* include/pupa/disk.h: Include <pupa/device.h>.
(pupa_print_partinfo): New prototype.
* include/pupa/dl.h (pupa_dl_set_prefix): Prototype removed.
(pupa_dl_get_prefix): Likewise.
* include/pupa/misc.h: Include <pupa/err.h>.
(pupa_isgraph): New prototype.
(pupa_isdigit): Likewise.
(pupa_split_cmdline): Likewise.
* include/pupa/normal.h: Include <pupa/arg.h>.
(pupa_command): Changed the prototype of the member `func' to
match the argument parsing interface. Added member `options'.
(pupa_register_command): Updated to match function.
(pupa_arg_parse): New prototype.
(pupa_hello_init) [PUPA_UTIL]: New prototype.
(pupa_hello_fini) [PUPA_UTIL]: Likewise.
(pupa_ls_init) [PUPA_UTIL]: Likewise.
(pupa_ls_fini) [PUPA_UTIL]: Likewise.
(pupa_cat_init) [PUPA_UTIL]: Likewise.
(pupa_cat_fini) [PUPA_UTIL]: Likewise.
(pupa_boot_init) [PUPA_UTIL]: Likewise.
(pupa_boot_fini) [PUPA_UTIL]: Likewise.
(pupa_cmp_init) [PUPA_UTIL]: Likewise.
(pupa_cmp_fini) [PUPA_UTIL]: Likewise.
(pupa_terminal_init) [PUPA_UTIL]: Likewise.
(pupa_terminal_fini) [PUPA_UTIL]: Likewise.
* kern/disk.c: Include <pupa/file.h>.
(pupa_print_partinfo): New function.
* kern/dl.c: Include <pupa/env.h>.
(pupa_dl_dir): Variable removed.
(pupa_dl_load): Use the environment variable `prefix' instead of
the variable pupa_dl_dir.
(pupa_dl_set_prefix): Function removed.
(pupa_dl_get_prefix): Likewise.
* kern/i386/pc/init.c: Include <pupa/env.h>.
(pupa_machine_init): Use the environment variable `prefix' instead of
using pupa_dl_set_prefix to set the prefix.
* kern/main.c: Include <pupa/env.h>.
(pupa_set_root_dev): Use the environment variable `prefix' instead of
using pupa_dl_get_prefix to get the prefix.
* kern/misc.c: Include <pupa/env.h>.
(pupa_isdigit): New function.
(pupa_isgraph): Likewise.
(pupa_ftoa): Likewise.
(pupa_vsprintf): Added support for printing values of the type
`double'. Make it possible to format variable output when using
formatting like `%1.2%f'.
(pupa_split_cmdline): New function.
* kern/rescue.c: Include <pupa/env.h>.
(next_word): Removed function.
(pupa_rescue_cmd_prefix): Likewise.
(pupa_rescue_cmd_set): New function.
(pupa_rescue_cmd_unset): New function.
(pupa_enter_rescue_mode): Use the `pupa_split_cmdline' function to
split the command line instead of splitting it here. Added
support for setting variables using the syntax `foo=bar'. Don't
initialize the prefix command anymore. Initialized the set and
unset commands.
* normal/cmdline.c: Include <pupa/env.h>.
(pupa_tab_complete): Added prototypes for print_simple_completion,
print_partition_completion, add_completion, iterate_commands,
iterate_dev, iterate_part and iterate_dir. Moved code to print
partition information from here to kern/disk.c.
(pupa_cmdline_run): Don't check if the funtion exists anymore.
* normal/main.c: Include <pupa/env.h>.
(pupa_rescue_cmd_normal): Use the environment variable `prefix'
instead of using pupa_dl_get_prefix to get the prefix.
* term/i386/pc/vga.c: Include <pupa/arg.h>.
(check_vga_mem): Cast pointers to `void *' to silence a gcc
warning.
(pupa_vga_putchar) [! DEBUG_VGA]: Removed for this case.
(pupa_vga_setcolor): Declare unused variables with `__attribute__
((unused))' to silence a gcc warning.
(pupa_vga_setcolor): Likewise.
(debug_command): Changed to match argument parsing
interface changes.
* util/pupa-emu.c: Include <pupa/env.h>.
(options): Added 0's for unused fields to silence a gcc warning.
(argp): Likewise.
(main): Use the environment variable `prefix' instead of using
pupa_dl_set_prefix to set the prefix. Initialize the commands ls,
boot, cmp, cat and terminal. Finish the commands boot, cmp, cat
and terminal.
* util/i386/pc/getroot.c: Include <pupa/i386/pc/util/biosdisk.h>.
* util/misc.c: Include <malloc.h>.
(pupa_malloc): Rewritten so errors are correctly reported.
(pupa_realloc): Likewise.
(pupa_memalign): Likewise.
(pupa_mm_init_region): Declare unused variables with
`__attribute__ ((unused))' to silence a gcc warning.
* normal/i386/setjmp.S: Remove tab at the end of the file to
silence a gcc warning.
* loader/i386/pc/linux.c (pupa_rescue_cmd_initrd): Declare unused
variables with `__attribute__ ((unused))' to silence a gcc
warning.
* loader/i386/pc/multiboot.c (pupa_multiboot_unload): Make the
local variable i unsigned to silence a gcc warning.
* kern/term.c: Include <pupa/misc.h>.
(pupa_more_lines): New variable.
(pupa_more): Likewise.
(pupa_putcode): When the pager is active pause at the end of every
screen.
(pupa_set_more): New function.
* include/pupa/term.h (pupa_set_more): New prototype.
I forgot to check in these changes for a long time. This adds
incomplete support for VGA console, and this is still very
buggy. Also, a lot of consideration is required for I18N,
UNICODE, and VGA font issues. Therefore, assume that this is
such that "better than nothing".
* font/manager.c: New file.
* include/pupa/font.h: Likewise.
* include/pupa/i386/pc/vga.h: Likewise.
* term/i386/pc/vga.c: Likewise.
* util/unifont2pff.rb: Likewise.
* conf/i386-pc.rmk (kernel_img_HEADERS): Added machine/vga.h.
(pkgdata_MODULES): Added vga.mod and font.mod.
(vga_mod_SOURCES): New variables.
(vga_mod_CFLAGS): Likewise.
(font_mod_SOURCES): Likewise.
(font_mod_CFLAGS): Likewise.
* include/pupa/err.h (PUPA_ERR_BAD_FONT): New constant.
* include/pupa/term.h: Include pupa/err.h.
(struct pupa_term): Added init and fini.
Changed the argument of putchar to pupa_uint32_t.
* include/pupa/i386/pc/console.h: Include pupa/symbol.h.
(pupa_console_real_putchar): New prototype.
(pupa_console_putchar): Removed.
(pupa_console_checkkey): Exported.
(pupa_console_getkey): Likewise.
* kern/misc.c (pupa_vsprintf): Add support for UNICODE
characters.
* kern/term.c (pupa_term_set_current): Rewritten.
(pupa_putchar): Likewise.
(pupa_putcode): New function.
* kern/i386/pc/startup.S (pupa_console_putchar): Renamed to ...
(pupa_console_real_putchar): ... this.
(pupa_vga_set_mode): New function.
(pupa_vga_get_font): Likewise.
* normal/command.c: Include pupa/term.h.
(terminal_command): New function.
(pupa_command_init): Register the command "terminal".
* normal/menu.c (DISP_LEFT): Changed to a UNICODE value.
(DISP_UP): Likewise.
(DISP_RIGHT): Likewise.
(DISP_DOWN): Likewise.
(DISP_HLINE): Likewise.
(DISP_VLINE): Likewise.
(DISP_UL): Likewise.
(DISP_UR): Likewise.
(DISP_LL): Likewise.
(DISP_LR): Likewise.
* term/i386/pc/console.c (pupa_console_putchar): New function.
