* grub-core/fs/zfs/zfs.c (zlib_decompress): New function.
(decomp_table): Add zlib entries.
(zio_read): USe 8 bits for compression function rather than 3.
* include/grub/zfs/zio.h (zio_compress): Add zlib values.
* grub-core/Makefile.core.def (ata_pthru): Removed.
(ahci): New module.
(pata): Likewise.
* grub-core/bus/usb/ohci.c (GRUB_MOD_FINI): Unregister preboot hook
on unload.
* grub-core/commands/hdparm.c (grub_hdparm_do_ata_cmd): Use ATA
readwrite.
(grub_hdparm_do_check_powermode_cmd): Likewise.
(grub_hdparm_do_smart_cmd): Likewise.
(grub_hdparm_set_val_cmd): Likewise.
(grub_cmd_hdparm): Likewise. Check thta we have an ATA device.
* grub-core/disk/ahci.c: New file.
* grub-core/disk/ata.c: Factor out the low-level part into ...
* grub-core/disk/pata.c: ... here.
* grub-core/disk/ata_pthru.c: Contents moved to ...
* grub-core/disk/pata.c: ... here.
* grub-core/disk/scsi.c (grub_scsi_names): New array.
(grub_scsi_iterate): Use grub_scsi_names.
(grub_scsi_open): Likewise.
* grub-core/kern/disk.c (grub_disk_ata_pass_through): Removed.
* include/grub/ata.h (grub_ata_commands): Add DMA commands.
(grub_ata_regs_t): New struct.
(grub_disk_ata_pass_through_parms): Likewise.
(grub_ata_device): Renamed to ...
(grub_ata): ... this.
(grub_ata_dev): New struct.
Removed all low-level inline functions.
* include/grub/scsi.h: Add PATA and AHCI subsystems.
(grub_scsi_dev): Removed 'name' and 'id'. Added 'id' parameter to
iterate hooks and open. All users updated.
* util/grub-install.in: Handle AHCI disk module.
* grub-core/video/readers/jpeg.c (JPEG_MARKER_DRI): New define.
(JPEG_MARKER_RST0): Likewise.
(JPEG_MARKER_RST1): Likewise.
(JPEG_MARKER_RST2): Likewise.
(JPEG_MARKER_RST3): Likewise.
(JPEG_MARKER_RST4): Likewise.
(JPEG_MARKER_RST5): Likewise.
(JPEG_MARKER_RST6): Likewise.
(JPEG_MARKER_RST7): Likewise.
(grub_jpeg_data): New fields dri, r1, bitmap_ptr.
(grub_jpeg_decode_dri): New function.
(grub_jpeg_decode_sos): Move image data related part into
grub_jpeg_decode_data function.
(grub_jpeg_decode_data): New function.
(grub_jpeg_reset): New function.
(grub_jpeg_decode_jpeg): Handle new markers.
Detect `ataraid' devices on GNU/kFreeBSD. Fix for ATA devices using
`ata' driver on kernel of FreeBSD 9.
* util/deviceiter.c [__FreeBSD_kernel__] (get_ada_disk_name)
(get_ataraid_disk_name): New functions.
[__FreeBSD_kernel__] (grub_util_iterate_devices): Scan for ataraid
(/dev/ar[0-9]+) and ada (/dev/ada[0-9]+) devices using
get_ataraid_disk_name() and get_ada_disk_name().
after ten consecutive open failures. Scanning all the way up to
10000 is excessive and can cause serious performance problems in
some configurations.
Fixes Ubuntu bug #787461.
* grub-core/kern/emu/getroot.c (grub_find_device): Recognize
dir == /dev/mapper.
(grub_guess_root_device): Use already known os_dev if possible.
* grub-core/kern/emu/hostdisk.c
(convert_system_partition_to_system_disk): Scan only in /dev/mapper
if device is known to be a dm one.
Also-By: Colin Watson <cjwatson@ubuntu.com>
* grub-core/kern/misc.c (grub_divmod64_full): Renamed to ...
(grub_divmod64): ... this.
* include/grub/misc.h (grub_divmod64): Removed. All users switch to full
version.
* grub-core/fs/fat.c: Include grub/fat.h.
(grub_fat_bpb): Moved to ...
* include/grub/fat.h (grub_fat_bpb): ... here. New file.
* grub-core/loader/i386/pc/chainloader.c: Include grub/fat.h and
grub/ntfs.h.
* include/grub/i386/pc/chainloader.h (grub_chainloader_flags_t):
Moved from here...
* grub-core/loader/i386/pc/chainloader.c (grub_chainloader_flags_t): ...
here.
* grub-core/loader/i386/pc/chainloader.c (grub_chainloader_patch_bpb):
New function.
(grub_chainloader_cmd): Patch BPB if --bpb is given.
(GRUB_MOD_INIT): Show --bpb.
* grub-core/loader/i386/pc/ntldr.c (grub_cmd_ntldr): Patch BPB.
* grub-core/normal/main.c (features): New variable.
(GRUB_MOD_INIT): Set feature_* variables.
* include/grub/i386/pc/chainloader.h (grub_chainloader_patch_bpb): New
proto.
* include/grub/ntfs.h (grub_ntfs_bpb): New field bios_drive.
(grub_fat_bpb): Moved to ...
* include/grub/fat.h (grub_fat_bpb): ... here. New file.
* grub-core/loader/i386/pc/chainloader.c: Include grub/fat.h and
grub/ntfs.h.
* include/grub/i386/pc/chainloader.h (grub_chainloader_flags_t):
Moved from here...
* grub-core/loader/i386/pc/chainloader.c (grub_chainloader_flags_t): ...
here.
* grub-core/loader/i386/pc/chainloader.c (grub_chainloader_patch_bpb):
New function.
(grub_chainloader_cmd): Patch BPB if --bpb is given.
(GRUB_MOD_INIT): Show --bpb.
* grub-core/loader/i386/pc/ntldr.c (grub_cmd_ntldr): Patch BPB.
* grub-core/normal/main.c (features): New variable.
(GRUB_MOD_INIT): Set feature_* variables.
* include/grub/i386/pc/chainloader.h (grub_chainloader_patch_bpb): New
proto.
* include/grub/ntfs.h (grub_ntfs_bpb): New field bios_drive.
* grub-core/loader/i386/linux.c (GRUB_LINUX_CL_END_OFFSET): Removed.
(maximal_cmdline_size): New variable.
(allocate_pages): Use maximal_cmdline_size.
(grub_cmd_linux): Set and use maximal_cmdline_size.
* grub-core/loader/i386/pc/linux.c (GRUB_LINUX_CL_END_OFFSET): Removed.
(allocate_pages): Use maximal_cmdline_size.
(grub_cmd_linux): Set and use maximal_cmdline_size.
* include/grub/i386/linux.h (GRUB_LINUX_SETUP_MOVE_SIZE): Removed.
(linux_kernel_header): Add fields kernel_alignment, relocatable, pad
and cmdline_size.
* grub-core/kern/emu/getroot.c (grub_util_is_dmraid): Removed.
(grub_util_is_lvm): New function.
(grub_util_get_dev_abstraction): Assume dmraid if not lvm rather
than lvm if not dmraid.
Handle mapped md nodes.
* grub-core/kern/emu/hostdisk.c (device_is_mapped): Rename to ...
(grub_util_device_is_mapped): ... this. Make always available. All users
updated.
(grub_util_get_dm_node_linear_info) [HAVE_DEVICE_MAPPER]: New function.
(convert_system_partition_to_system_disk): Handle lvm, mpath and
dmraid nodes.
* include/grub/emu/misc.h (grub_util_device_is_mapped): New proto.
Also-By: Colin Watson <cjwatson@ubuntu.com>
allow both endiannesses coexist.
* configure.ac: proparate target_cpu=mipsel rather than resetting to
mips. All conditions adjusted.
* tests/util/grub-shell-tester.in: Remove gratuitious target_cpu
variable.
* util/grub-install.in: Adjust conditions to take renaming into account.
* util/grub-mkimage.c (image_targets): Likewise. New target
mips-qemu_mips-elf for bigendian mips.
* grub-core/boot/decompressor/none.c (grub_decompress_core): Exit
early if src == dest.
* util/grub-mkimage.c (generate_image): Arange for src == dest if
compression is none.
as opposed to after.
* grub-core/Makefile.core.def (kernel): Increase linking address.
(none_decompress): Likewise.
(xz_decompress): Likewise.
* grub-core/boot/mips/startup_raw.S: Use prewritten uncompression
address.
* grub-core/kern/mips/arc/init.c (grub_machine_init): Handle memory
layout change.
(grub_arch_modules_addr): New function.
* grub-core/kern/mips/init.c (grub_arch_modules_addr): Moved from here...
* grub-core/kern/mips/loongson/init.c (grub_arch_modules_addr): .. here
* grub-core/kern/mips/qemu_mips/init.c (grub_arch_modules_addr): ... and
here.
* grub-core/kern/mips/startup.S (total_size): Rename to ...
(grub_total_modules_size): ... this. Make global.
[GRUB_MACHINE_ARC]: Don't attempt to move modules out of the bss.
* include/grub/offsets.h (GRUB_KERNEL_MIPS_LOONGSON_UNCOMPRESSED_ADDR):
New definition.
(GRUB_KERNEL_MIPS_QEMU_MIPS_UNCOMPRESSED_ADDR): Likewise.
(GRUB_KERNEL_MIPS_ARC_UNCOMPRESSED_ADDR): Likewise.
(GRUB_KERNEL_MACHINE_UNCOMPRESSED_ADDR): Likewise.
(GRUB_KERNEL_MIPS_ARC_LINK_ADDR): Increased.
* util/grub-mkimage.c (image_target_desc): New flag
PLATFORM_FLAGS_MODULES_BEFORE_KERNEL.
(image_targets): Set PLATFORM_FLAGS_MODULES_BEFORE_KERNEL on mips-arc.
(generate_image): Handle images with modules before kernel.
and GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT, which replace
GRUB_CMDLINE_LINUX and GRUB_CMDLINE_LINUX_DEFAULT (complementing the
existing options which append).
* docs/grub.texi (Simple configuration): Document new options.
Reported by: Ian Jackson. Fixes Debian bug #617538.
* Makefile.util.def (libgrubmods.a): Add dvh.c.
* conf/Makefile.common (CCASFLAGS_PLATFORM): Add -mips3 on all mips
platforms.
* configure.ac: New target mips-arc.
* gentpl.py: Likewise.
* grub-core/Makefile.am: Likewise.
* grub-core/Makefile.core.def: Likewise.
(xz_decompress): Remove -D GRUB_MACHINE_LINK_ADDR.
(none_decompress): Likewise.
(lsdev): New module.
(datetime): Use lib/arc/datetime.c on ARC.
(part_dvh): New module.
* grub-core/commands/arc/lsdev.c: New file.
* grub-core/disk/arc/arcdisk.c: Likewise.
* grub-core/kern/mips/arc/init.c: Likewise.
* grub-core/kern/mips/cache_flush.S: Don't flush non 4-byte
aligned addresses.
* grub-core/kern/mips/dl.c (grub_arch_dl_check_header): Fix bigendian
support.
(grub_arch_dl_relocate_symbols): Likewise.
* grub-core/kern/mips/loongson/init.c (grub_get_rtc): Moved from here...
* grub-core/kern/mips/init.c (grub_get_rtc): ... here.
* grub-core/kern/mips/startup.S (grub_arch_cpuclock): Have on all
platforms.
* grub-core/lib/arc/datetime.c: New file.
* grub-core/loader/mips/linux.c: Always include time.h. Don't include
pci.h on non-loongson.
(envp_off) [!GRUB_MACHINE_MIPS_LOONGSON]: Remove.
(grub_linux_boot): Set unused registers to 0.
(grub_cmd_linux) [!GRUB_MACHINE_MIPS_LOONGSON]: Remove envp.
* grub-core/mmap/mips/loongson/uppermem.c: Moved from here ...
* grub-core/mmap/mips/uppermem.c: ...here.
* grub-core/partmap/dvh.c: New file.
* grub-core/term/arc/console.c: Likewise.
* grub-core/term/terminfo.c (ANSI_C0_STR): New const.
(grub_terminfo_set_current): Add terminal "arc".
(grub_terminfo_readkey): Support ARC sequences.
* include/grub/arc/arc.h: New file.
* include/grub/arc/console.h: Likewise.
* include/grub/disk.h (grub_disk_dev_id): Add
GRUB_DISK_DEVICE_ARCDISK_ID.
* include/grub/mips/arc/kernel.h: New file.
* include/grub/mips/arc/memory.h: Likewise.
* include/grub/mips/arc/time.h: Likewise.
* include/grub/mips/loongson/kernel.h (grub_halt): Moved from here ...
* include/grub/mips/kernel.h (grub_halt): ... here.
* include/grub/mips/loongson.h (GRUB_CPU_REGISTER_WRAP): Moved from
here...
* include/grub/mips/mips.h (GRUB_CPU_REGISTER_WRAP): ... here.
(GRUB_CPU_LOONGSON_COP0_TIMER_COUNT): Moved from here ...
* include/grub/mips/mips.h (GRUB_CPU_LOONGSON_COP0_TIMER_COUNT): .. here
* include/grub/mips/loongson/kernel.h (grub_reboot): Removed redundant
proto.
* include/grub/mips/loongson/memory.h (GRUB_ARCH_LOWMEMVSTART): Moved
from here ...
* include/grub/mips/memory.h (GRUB_ARCH_LOWMEMVSTART): ... here.
(GRUB_ARCH_LOWMEMPSTART): Moved from here ...
* include/grub/mips/memory.h (GRUB_ARCH_LOWMEMPSTART): ... here.
(GRUB_ARCH_LOWMEMMAXSIZE): Moved from here ...
* include/grub/mips/memory.h (GRUB_ARCH_LOWMEMMAXSIZE): ... here.
(GRUB_ARCH_HIGHMEMPSTART): Moved from here ...
* include/grub/mips/memory.h (GRUB_ARCH_HIGHMEMPSTART): ... here.
(grub_phys_addr_t): Moved from here ...
* include/grub/mips/memory.h (grub_phys_addr_t): ... here.
(grub_vtop): Moved from here ...
* include/grub/mips/memory.h (grub_vtop): ... here.
(grub_map_memory): Moved from here ...
* include/grub/mips/memory.h (grub_map_memory): ... here.
(grub_unmap_memory): Moved from here ...
* include/grub/mips/memory.h (grub_unmap_memory): ... here.
(grub_machine_mmap_iterate): Moved from here ...
* include/grub/mips/memory.h (grub_machine_mmap_iterate): ... here.
(grub_mmap_get_lower): Moved from here ...
* include/grub/mips/memory.h (grub_mmap_get_lower): ... here.
(grub_mmap_get_upper): Moved from here ...
* include/grub/mips/memory.h (grub_mmap_get_upper): ... here.
* include/grub/mips/loongson/time.h (grub_arch_cpuclock): Moved from
here ...
* include/grub/mips/time.h (grub_arch_cpuclock): ... here.
* include/grub/mips/loongson/time.h (grub_get_rtc): Moved from
here ...
* include/grub/mips/time.h (grub_get_rtc): ... here.
* include/grub/mips/loongson/time.h (grub_arch_cpuclock): Moved from
here ...
* include/grub/mips/time.h (grub_arch_cpuclock): ... here.
* include/grub/mips/loongson/time.h (grub_cpu_idle): Moved from
here ...
* include/grub/mips/time.h (grub_cpu_idle): ... here.
* include/grub/offsets.h (GRUB_KERNEL_MIPS_ARC_LINK_ADDR): New
definition.
(GRUB_KERNEL_MIPS_ARC_LINK_ALIGN): Likewise.
(GRUB_KERNEL_MIPS_ARC_COMPRESSED_SIZE): Likewise.
(GRUB_KERNEL_MIPS_ARC_UNCOMPRESSED_SIZE): Likewise.
(GRUB_KERNEL_MIPS_ARC_TOTAL_MODULE_SIZE): Likewise.
(GRUB_KERNEL_MIPS_ARC_PREFIX): Likewise.
(GRUB_KERNEL_MIPS_ARC_PREFIX_END): Likewise.
(GRUB_KERNEL_MIPS_ARC_MOD_ALIGN): Likewise.
(GRUB_MACHINE_LINK_ADDR): Likewise.
* include/grub/terminfo.h (GRUB_TERMINFO_READKEY_MAX_LEN): Increased
to 6.
* util/grub-install.in: Run dvhtool on ARC.
* util/grub-mkimage.c (image_targets): Add mips-arc.
* grub-core/bus/usb/usb.c (grub_usb_device_initialize): Fail if
configcnt == 0.
* include/grub/usb.h (grub_usb_err_t): New enum value
GRUB_USB_ERR_BADDEVICE.
* grub-core/fs/affs.c (grub_affs_time): New struct.
(grub_affs_file): New field mtime.
(grub_fshelp_node): Changed 'block' and 'parent' to more appropriate
type. Removed 'size'. New field 'di'. All users updated.
(grub_affs_mount): Simplify checsum checking.
(grub_affs_iterate_dir): New helper grub_affs_create_node.
(grub_affs_dir): Handle mtime.
* grub-core/fs/cpio.c (grub_cpio_find_file): Handle mtime.
(grub_cpio_dir): Likewise.
* grub-core/fs/hfs.c (grub_hfs_dirrec): New fields 'ctime' and 'mtime'.
(grub_hfs_filerec): New field mtime.
(grub_hfs_dir): Handle mtime.
(grub_hfs_mtime): New function.
(grub_hfs_fs): Register grub_hfs_mtime.
* grub-core/fs/iso9660.c (grub_iso9660_date2): New struct.
(grub_iso9660_dir): New field mtime.
(grub_fshelp_node): New field dirent.
(iso9660_to_unixtime): New function.
(iso9660_to_unixtime2): Likewise.
(grub_iso9660_read_symlink): Use node->dirent.
(grub_iso9660_iterate_dir): Likewise.
(grub_iso9660_dir): Set mtime.
(grub_iso9660_mtime): New function.
(grub_iso9660_fs): Register grub_iso9660_mtime.
* grub-core/fs/jfs.c (grub_jfs_time): New struct.
(grub_jfs_inode): New fields atime, ctime and mtime.
(grub_jfs_dir): Set mtime.
* grub-core/fs/minix.c (grub_minix_dir): Likewise.
* grub-core/fs/ntfs.c (list_file): Set mtime.
(grub_ntfs_dir): Likewise.
* grub-core/fs/reiserfs.c (grub_fshelp_node): New field 'mtime'.
(grub_reiserfs_iterate_dir): Set mtime.
(grub_reiserfs_dir): Likewise.
* grub-core/fs/sfs.c (grub_sfs_obj): New field mtime.
(grub_fshelp_node): Likewise.
(grub_sfs_iterate_dir): Set mtime.
(grub_sfs_dir): Likewise.
* grub-core/fs/udf.c (grub_udf_dir): Set mtime.
* grub-core/fs/xfs.c (grub_xfs_time): New struct.
(grub_xfs_inode): New fields atime, mtime, ctime.
(grub_xfs_dir): Set mtime.
* include/grub/datetime.h (grub_datetime2unixtime): New function.
* include/grub/hfs.h (grub_hfs_sblock): New fields ctime and mtime.
* include/grub/ntfs.h (grub_fshelp_node): New field mtime.
Support UDF symlinks.
* grub-core/fs/udf.c (grub_udf_iterate_dir): Handle symlinks.
(grub_ufs_read_symlink): New function. All users updated.
Check amiga partmap checksum.
* grub-core/partmap/amiga.c (grub_amiga_rdsk): Pad to 128 bytes.
(grub_amiga_partition): Likewise.
(amiga_partition_map_checksum): New function.
(amiga_partition_map_iterate): Check checksum.
* grub-core/Makefile.core.def (minix3): New module.
* grub-core/fs/minix.c (GRUB_MINIX_MAGIC) [MODE_MINIX3]: New value.
(GRUB_MINIX_BSIZE): Removed.
(GRUB_MINIX_INODE_DIR_BLOCKS): New definition. All users updated.
(grub_minix_ino_t): New type.
(grub_minix_le_to_cpu_ino): New macro.
(GRUB_MINIX_ZONE2SECT): New definition. All users updated.
(grub_minix_sblock) [MODE_MINIX3]: Change for minix3.
(grub_minix_data): New field block_size.
(grub_minix_read_file): Handle 64-bit correctly.
* grub-core/fs/minix3.c: New file.
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
* Makefile.util.def (libgrubmods.a): Add grub-core/kern/ia64/dl_helper.c
* configure.ac: Add ia64-efi target.
Probe for __ia64_trampoline, __udivsi3, __umoddi3, __udivdi3,
__divsi3, __modsi3, __umodsi3, __moddi3 and __divdi3 symbols.
* gentpl.py: Add ia64_efi platform.
Rename x86_efi to efi and Add ia64-efi. All users updated.
* grub-core/Makefile.am: Set KERNEL_HEADER_FILES for ia64-efi.
* grub-core/Makefile.core.def (kernel.img): Add compile flags for ia64.
Remove kern/generic/rtc_get_time_ms.c on EFI.
Add kern/ia64/efi/startup.S, kern/ia64/efi/init.c, kern/ia64/dl.c,
kern/ia64/dl_helper.c on ia64-efi.
Add kern/emu/cache.c on emu.
(linux): Use on loader/ia64/efi/linux.c on ia64.
* grub-core/gensymlist.sh (grub_register_exported_symbols): Check
whether symbol is a function.
* grub-core/kern/dl.c [GRUB_MACHINE_EMU]: Include sys/mman.h.
(grub_symbol): New field 'isfunc'.
(grub_dl_resolve_symbol): Return whole symbol rather than just address.
(grub_dl_register_symbol): New argument 'isfunc'. All users updated.
(grub_dl_load_segments): Place all sections into the same region.
[__ia64__]: Create trampolines and got.
[GRUB_MACHINE_EMU]: Call mprotect.
(grub_dl_resolve_symbols): Resolve symbol type as well.
[__ia64__]: Create function descriptors.
* grub-core/kern/efi/efi.c (grub_get_rtc): Renamed to ...
(grub_rtc_get_time_ms): ... this. Expressions simplified.
(grub_get_rtc): New function.
* grub-core/kern/emu/cache.c [__ia64__]: New file.
* grub-core/kern/emu/cache.S: Renamed to ...
* grub-core/kern/emu/cache_s.S: ... this.
[__ia64__]: Add a nop.
* grub-core/kern/emu/full.c (grub_arch_dl_get_tramp_got_size)
[__ia64__]: New function.
* grub-core/kern/emu/lite.c [__ia64__]: Include ../ia64/dl.c.
* grub-core/kern/ia64/dl.c: New file.
* grub-core/kern/ia64/dl_helper.c: Likewise.
* grub-core/kern/ia64/efi/init.c: New file.
* grub-core/kern/ia64/efi/startup.S: Likewise.
* grub-core/lib/efi/halt.c [__ia64__]: Don't try acpi.
* grub-core/lib/ia64/longjmp.S: New file (from glibc).
* grub-core/lib/ia64/setjmp.S: Likewise (from glibc).
* grub-core/lib/setjmp.S [__ia64__]: Include ./ia64/setjmp.S.
* grub-core/loader/ia64/efi/linux.c: New file.
* include/grub/dl.h (GRUB_MOD_NAME): Redefined using C rather than asm.
(GRUB_MOD_DEP): Likewise.
(grub_dl) [__ia64__]: New fields got and tramp.
(grub_dl): New field 'base'.
(grub_dl_register_symbol): New argument isfunc. All users updated.
(GRUB_IA64_DL_TRAMP_ALIGN): New definition.
(GRUB_IA64_DL_TRAMP_SIZE): Likewise.
(GRUB_IA64_DL_GOT_ALIGN): Likewise.
(grub_ia64_dl_get_tramp_got_size): New proto.
(GRUB_ARCH_DL_TRAMP_ALIGN) [__ia64__]: Likewise
(GRUB_ARCH_DL_GOT_ALIGN) [__ia64__]: Likewise
(grub_arch_dl_get_tramp_got_size) [__ia64__]: Likewise
* include/grub/efi/api.h: Skip call wrappers on ia64.
* include/grub/efi/pe32.h (GRUB_PE32_MACHINE_IA64): New definition.
* include/grub/efi/time.h (GRUB_TICKS_PER_SECOND): Change to 1000.
* include/grub/elf.h (ELF_ST_INFO): New definition.
* include/grub/ia64/efi/kernel.h: New file.
* include/grub/ia64/efi/memory.h: Likewise.
* include/grub/ia64/efi/time.h: Likewise.
* include/grub/ia64/kernel.h: Likewise.
* include/grub/ia64/setjmp.h: Likewise (from glibc).
* include/grub/ia64/time.h: New file.
* include/grub/ia64/types.h: Likewise.
* include/grub/libgcc.h (__udivsi3, __umodsi3, __umoddi3, __udivdi3,
__moddi3, __divdi3, __divsi3, __modsi3, __ia64_trampoline):
New protos.
* include/grub/offsets.h (GRUB_KERNEL_IA64_EFI_PREFIX): New definition.
(GRUB_KERNEL_IA64_EFI_PREFIX_END): Likewise.
* include/grub/types.h (PRIxGRUB_ADDR): Likewise.
* util/grub-mkimage.c (image_target_desc): New field pe_target.
All users updated.
(EFI64_HEADER_SIZE): New definition. All users updated.
(image_targets): Add ia64-efi.
* util/grub-mkimagexx.c (relocate_symbols): New arguments jumpers and
jumpers_addr. All users updated.
Create function descriptors.
(count_funcs): New function.
(unaligned_uint32): New struct.
(MASK20): New definition.
(MASK19): Likewise.
(MASKF21): Likewise.
(add_value_to_slot_20b): New function.
(add_value_to_slot_21_real): Likewise.
(add_value_to_slot_21): Likewise.
(ia64_kernel_trampoline): New struct.
(nopm): New variable.
(jump): Likewise.
(make_trampoline): New function.
(relocate_addresses): Handle ia64.
(make_reloc_section): Likewise.
(load_image): Likewise.
Also-By: Robert Millan <rmh.grub@aybabtu.com>
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
* configure.ac: Rename yeeloong platform to loongson. All users updated.
* grub-core/Makefile.core.def (fwstart_fuloong): New image.
* grub-core/boot/mips/loongson/fuloong.S: New file.
* grub-core/boot/mips/loongson/fwstart.S: Wait for CS5536 to come up.
Explicitly init CS5536.
[FULOONG]: Don't use serial until CS5536 is available.
Set GPIO based on dumps.
(serial_hw_init) [FULOONG]: Handle CS5536 parts.
[FULOONG]: Handle GPIO and memory controller differences.
Parse machine type in $a2.
* grub-core/boot/mips/startup_raw.S: Determine and save the
architecture.
* grub-core/bus/cs5536.c (gpiodump): Move to fwstart.S.
(grub_cs5536_init_geode): Remove gpio part. Conditionalise DIVIL
init on architecture type.
* grub-core/kern/mips/loongson/init.c (grub_machine_init): Init
SIS315E. Don't init at_keyboard on fuloong.
(grub_halt): Support Fuloong.
* grub-core/kern/mips/startup.S [LOONGSON]: Save $s7.
* grub-core/loader/mips/linux.c (LOONGSON_MACHTYPE): Removed.
(loongson_machtypes): New array.
(grub_cmd_linux) [GRUB_MACHINE_MIPS_LOONGSON]: Pass the right machine
type.
* grub-core/term/ns8250.c (serial_get_divisor): New parameter port and
config. All users updated. Handle CS5536 serial.
* grub-core/term/serial.c (grub_serial_register): Conditionalise
default port on machine type. Register serial as inactive.
* grub-core/video/sis315pro.c: New file.
* include/grub/cs5536.h (GRUB_CS5536_MSR_MAILBOX_CONFIG_ENABLED): New
definition.
(GRUB_CS5536_MSR_MAILBOX_CONFIG): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART1_COM1): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART2_COM3): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART1_CONF): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART2_CONF): Likewise.
* include/grub/mips/loongson.h (GRUB_CPU_LOONGSON_SHUTDOWN_GPIO): Rename
to ...
(GRUB_CPU_YEELOONG_SHUTDOWN_GPIO): ... this.
* include/grub/mips/loongson/kernel.h (GRUB_ARCH_MACHINE_YEELOONG): New
definition.
(GRUB_ARCH_MACHINE_FULOONG): Likewise.
(grub_arch_machine): New extern var.
* include/grub/mips/loongson/serial.h
(GRUB_MACHINE_SERIAL_DIVISOR_115200): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0_DIVISOR_115200): ... this.
(GRUB_MACHINE_SERIAL_PORT): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0): ... this.
(GRUB_MACHINE_SERIAL_PORT2_DIVISOR_115200): New definition.
(GRUB_MACHINE_SERIAL_PORT1): Likewise.
(GRUB_MACHINE_SERIAL_PORT2): Likewise.
(GRUB_MACHINE_SERIAL_PORTS): Include ports 1 and 2.
* include/grub/term.h (grub_term_register_input_inactive): New inline
function.
(grub_term_register_output_inactive): Likewise.
* include/grub/video.h (grub_video_driver_id): New value
GRUB_VIDEO_DRIVER_SIS315PRO.
* util/grub-mkimage.c (image_target_desc): Rename name to dirname.
New field "names". All users updated.
New field value IMAGE_FULOONG_FLASH.
(generate_image): USe separate fwstart hashes for yeeloong and fuloong.
* util/grub-pe2elf.c (MODLICENSE_SECTION): New definition. All following
sections shifted.
(insert_string): Make argument const char * instead of char *.
(write_section_data): Handle long section names.
Handle module_license.
to spin up.
* grub-core/disk/ata.c (grub_atapi_identify): Use GRUB_ATA_TOUT_DEV_INIT
if dev->present is 1. Reset dev->present on failure.
(grub_ata_device_initialize): Set dev->present to 1.
* include/grub/ata.h (GRUB_ATA_TOUT_DEV_INIT): New value.
(grub_ata_device): New member 'present'.
file_path to 0 for surety.
(grub_chainloader_boot): Set exit_data to NULL.
Unset the loader once done.
(grub_cmd_chainloader): Fix confusing error message if file is empty.
(devpath_1): Use MAKE_PIWG_PATH.
(devpath_2): Likewise.
(devpath_3): Likewise.
(devpath_4): Likewise.
(devpath_5): Likewise.
(devpath_6): Likewise.
The appleldr.mod was checked that to be binary identical to previous
version.
GRUB_ERR_BAD_FS rather than GRUB_ERR_IO if the disk is not a pxe
disk; otherwise grub_fs_probe will not fall back to the next
filesystem.
(grub_pxefs_open): Likewise, for consistency.
Reported and tested by: Ezekiel Grave.
#551428.
* docs/man/grub-editenv.h2m (SEE ALSO): New section.
* docs/man/grub-emu.h2m (SEE ALSO): Likewise.
* docs/man/grub-fstest.h2m (SEE ALSO): Likewise.
* docs/man/grub-install.h2m (SEE ALSO): Likewise.
* docs/man/grub-macho2img.h2m (SEE ALSO): Likewise.
* docs/man/grub-menulst2cfg.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkconfig.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkdevicemap.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkfont.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkimage.h2m (SEE ALSO): Likewise.
* docs/man/grub-mklayout.h2m (SEE ALSO): Likewise.
* docs/man/grub-mknetdir.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkpasswd-pbkdf2.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkrelpath.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkrescue.h2m (SEE ALSO): Likewise.
* docs/man/grub-ofpathname.h2m (SEE ALSO): Likewise.
* docs/man/grub-pe2elf.h2m (SEE ALSO): Likewise.
* docs/man/grub-probe.h2m (SEE ALSO): Likewise.
* docs/man/grub-reboot.h2m (SEE ALSO): Likewise.
* docs/man/grub-script-check.h2m (SEE ALSO): Likewise.
* docs/man/grub-set-default.h2m (SEE ALSO): Likewise.
* docs/man/grub-setup.h2m (SEE ALSO): Likewise.
(grub_find_root_device_from_mountinfo): Remove non-virtual-device
test that was incorrectly reintroduced in r3214.
Reported by: Ian Dall. Fixes Savannah bug #33133.
* grub-core/lib/i386/relocator16.S (grub_relocator16_start): Move
grub_relocator16_sp to %esp rather than %ss, and zero-extend it.
Fixes Ubuntu bug #683904.
New function.
(grub_util_biosdisk_close): Use grub_util_biosdisk_flush.
* include/grub/emu/hostdisk.h (grub_util_biosdisk_flush): New proto.
* util/grub-setup.c (setup): Use grub_util_biosdisk_flush.
* grub-core/gfxmenu/widget-box.c (get_border_width): New function.
(grub_gfxmenu_create_box): Register get_border_width.
* grub-core/gfxmenu/gui_list.c (draw_menu): Use get_border_width
if available.
* include/grub/gfxwidgets.h (grub_gfxmenu_box): New member
get_border_width.
* grub-core/disk/raid.c (ascii2hex): New function.
(grub_raid_open): Accept mduuid/%s specification.
* grub-core/kern/emu/getroot.c (get_mdadm_name): Revamped into ...
(get_mdadm_uuid): ... this.
(grub_util_get_grub_dev): Use mduuid/%s if UUID is available.
move-mounts appearing out of order. Fixes Ubuntu bug #738345.
* grub-core/kern/emu/getroot.c (find_root_device_from_mountinfo):
Build a list of relevant visible mounts using the mnt_id and
parent_mnt_id fields, and then scan that list at the end.
even more important testing by Colin.
* Makefile.util.def (libgrubmods.a): Add crc.c and gzio.c
* grub-core/Makefile.core.def (btrfs): Add crc.c.
* grub-core/fs/btrfs.c: Stub replaced with real implementation.
* grub-core/io/gzio.c (grub_gzio): New fields mem_input_size,
mem_input_off and mem_input. All users updated to accept in-RAM input.
(gzio_seek): New function.
(test_zlib_header): Likewise.
(grub_gzio_read): Likewise.
(grub_zlib_decompress): Likewise.
* grub-core/kern/emu/getroot.c (grub_find_root_device_from_mountinfo):
Accept partial and non-virtual mounts.
(grub_guess_root_device): Do rescanning after device_from_mountinfo to
avoid receiving /dev/dm-X as device.
* grub-core/kern/emu/misc.c (grub_make_system_path_relative_to_its_root):
Handle bind and partial mounts.
* grub-core/lib/crc.c: New file.
* include/grub/deflate.h: Likewise.
* include/grub/emu/misc.h (grub_find_root_device_from_mountinfo): New
proto.
* include/grub/lib/crc.h: New file.
* grub-core/normal/menu_entry.c (per_term_screen): New member
num_entries.
(print_down): Use num_entries.
(update_screen): Likewise.
(grub_menu_entry_run): Set num_entries.
* grub-core/normal/menu_text.c (menu_viewer_data): New member
num_entries.
(grub_print_message_indented): Move real part to ...
(grub_print_message_indented_real): ... here. Additional argument
dry_run.
(draw_border): Additional argument num_entries.
(print_message): Additional argument dry_run.
(print_entries): Receive menu viewer data.
(grub_menu_init_page): New argment num_entries.
(menu_text_set_chosen_entry): Use num_entries.
(grub_menu_try_text): Likewise.
* grub-core/normal/term.c (print_ucs4_terminal): New argument dry_run.
All users updated.
(grub_ucs4_count_lines): New function.
* include/grub/term.h (grub_term_cursor_x): Moved from here ..
* grub-core/normal/menu_text.c (grub_term_cursor_x): ... to here.
* include/grub/term.h (GRUB_TERM_MESSAGE_HEIGHT): Removed.
(grub_term_border_height): Likewise.
(grub_term_num_entries): Likewise.
build system.
(Getting started): GRUB is developed in Bazaar now, not Subversion.
(Comment): Fix typo.
(Getting started): General copy-editing.
(Typical Development Experience): Likewise.
(Error Handling): Likewise.
(Video API): Likewise.
const.
* util/grub-setup.c (main): Reuse md device name if available.
* util/raid.c (grub_util_raid_getmembers): Receive device name and
not GRUB name as argument.
Based on patch by: Florian Wagner <fwagner>.
* grub-core/gfxmenu/gfxmenu.c (grub_gfxmenu_try): Move the call to
grub_gfxterm_fullscreen on error paths to ...
* grub-core/normal/menu.c (menu_init): ...here. Wait after showing
theme loading error.
configurations like pvmove. Previously code assumed that in some places
only lvs or only pvs are used whereas it seems that they are used
interchangeably.
* grub-core/disk/lvm.c (read_node): New function.
(read_lv): Use read_node.
(grub_lvm_scan_device): Use only first mirror on pvmove'd lvs.
Match volumes only at the end when all lvs are found. Take both
pvs (first) and lvs (second) into account.
* include/grub/lvm.h (grub_lvm_segment): Merge fields stripe_* and
mirror_* into node_*. All users updated.
(grub_lvm_stripe): Merge this ...
(grub_lvm_mirror): ... and this ...
(grub_lvm_node): ... into this. All users updated.
contributions by the various authors with active copyright assignment.
* docs/Makefile.am (info_TEXINFOS): Add grub-dev.texi.
* docs/font_char_metrics.png: New file.
* docs/font_char_metrics.txt: Likewise.
* docs/grub-dev.texi: Likewise.
* docs/grub.texi (Internals): Move from here ...
* docs/grub-dev.texi: ... here.
rather than the file it points to. This fixes use of freed memory
if an existing loopback device is replaced.
* grub-core/disk/loopback.c (grub_loopback_open): Store dev in
disk->data, not dev->file.
(grub_loopback_read): Adjust file assignment to match.
Fixes Ubuntu bug #742967.
memory corruptions.
* grub-core/fs/jfs.c (struct grub_jfs_diropen): Interpret bytes as
unsigned.
(grub_jfs_lookup_symlink): Make ino a grub_uint32_t rather than int.
(grub_jfs_blkno): Use 64-bit quantities for block sectors.
(grub_jfs_read_inode): Likewise.
(grub_jfs_opendir): Likewise. Remove now useless casts.
(grub_jfs_getent): Likewise.
Make ino a grub_uint32_t rather than int.
(grub_jfs_mount): Ensure that blksize and log2_blksize are consistent.
(grub_jfs_read_file): Use 64-bit quantities when necessary. Replace
division and module with bit operations.
(grub_jfs_find_file): Make ino a grub_uint32_t.
(grub_jfs_lookup_symlink): Likewise. Use 64-bit quantities
warning. (This was in fact always initialised before use, but GCC
wasn't smart enough to prove that.)
* grub-core/script/lexer.c (grub_script_lexer_yywrap): Likewise.
(Changes from GRUB Legacy): Link to "Environment block" section for
details of limitations.
(Simple configuration): Likewise. Link to documentation of gfxmode
and gfxpayload variables from GRUB_GFXMODE and GRUB_GFXPAYLOAD
respectively.
(Shell-like scripting): Note that normal variables are stored in the
environment.
(gettext): Link to documentation of lang and locale_dir.
(list_env): New section.
(load_env): New section.
(save_env): New section.
(Reporting bugs): Fix typo.
(grub_lvm_segment): New fields 'type', 'mirror_count' and 'mirrors'.
(grub_lvm_mirror): New struct.
* grub-core/disk/lvm.c (grub_lvm_checkvalue): Commented out.
(grub_lvm_iterate): Iterate only visible volumes.
(grub_lvm_read): Factor out to ..
(read_lv): ... this. Support mirrors.
(grub_lvm_read): New wrapper function.
(grub_lvm_scan_device): Parse mirrors. Skip everything that isn't
stripped or mirrored.
[!DEBUG_RELOCATOR_NOMEM_DPRINTF]: Avoid grub_dprintf since not all
terminals are capabple of malloc-free operation.
(allocate_inreg) [!DEBUG_RELOCATOR_NOMEM_DPRINTF]: Likewise.
(malloc_in_range) [!DEBUG_RELOCATOR_NOMEM_DPRINTF]: Likewise.
is disabled, even if no partition table is found.
Otherwise, the BIOS on Dell Latitude E series laptops will freeze
during POST if an invalid partition table is contained in the PBR
of the active partition when GRUB is installed to a partition.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): New enum value
GRUB_IEEE1275_FLAG_BROKEN_ADDRESS_CELLS.
* grub-core/kern/ieee1275/mmap.c (grub_machine_mmap_iterate): Ignore
adress_cells and size:cells if GRUB_IEEE1275_FLAG_BROKEN_ADDRESS_CELLS
is set.
* grub-core/kern/ieee1275/cmain.c (grub_ieee1275_find_options): Set
GRUB_IEEE1275_FLAG_BROKEN_ADDRESS_CELLS on powermacs.
empty, since in that case we can only generate either nothing or a
syntactically invalid configuration file.
Reported by: Michal Suchanek. Fixes Debian bug #612898.
* conf/Makefile.common (STRIPFLAGS_KERNEL): Add -F elf32-i386 and
-R .drectve on cygwin.
* conf/i386-pc-cygwin-img-ld.sc: Merge rdata and pdata into data.
* configure.ac: Use $(top_builddir) in TARGET_OBJ2ELF.
(COND_CYGWIN): New condition.
* grub-core/Makefile.am (%.mod): Set TARGET_OBJ2ELF.
* grub-core/genmod.sh.in: Use ${TARGET_OBJ2ELF} and
not @TARGET_OBJ2ELF@.
* util/grub-pe2elf.c (write_symbol_table): Use pe_symtab->type and not
type to determine whether aux is to be used.
* grub-core/loader/i386/linux.c (grub_linux_setup_video): Use
grub_video_get_driver_id and variable gfxpayloadforcelfb to
fill have_vga.
(grub_linux_boot): Rely on grub_linux_setup_video to fill have_vga and
shift params->lfb_size.
* include/grub/i386/linux.h: Make an enume out of have_vga values.
* grub-core/normal/menu.c (grub_menu_execute_entry): New parameter
auto_boot. All users updated.
Declared static.
Handle chosen and default with submenus.
(grub_menu_execute_with_fallback): Declared static.
Don't notify failure if autobooted. Upper level does it.
(menuentry_eq): New function.
(get_entry_number): Use menuentry_eq.
(show_menu): New parameter "autobooted". All users updated.
(grub_show_menu): Likewise.
* include/grub/normal.h (grub_show_menu): Likewise.
* include/grub/menu.h (grub_menu_execute_entry): Removed.
(grub_menu_execute_with_fallback): Likewise.
(grub_machine_init): Don't check amount of low memory as reportedly
INT 12h can be broken and if low memory is too low we wouldn't have
gotten into grub_machine_init anyway.
move the cursor to (0,0).
* grub-core/term/ieee1275/ofconsole.c (grub_ofconsole_init_output):
Call grub_terminfo_output_init.
* grub-core/term/serial.c (grub_serial_term_output): Set .init.
* grub-core/term/terminfo.c (grub_terminfo_output_init): New function.
* include/grub/terminfo.h (grub_terminfo_output_init): New declaration.
* grub-core/kern/i386/pc/startup.S: Remove 0-data check.
* grub-core/lib/reed_solomon.c (decode_block): Do not proceed on 0 data
or 0 redundancy.
(grub_reed_solomon_add_redundancy): Do not proceed with 0 redundancy.
(grub_reed_solomon_recover): Likewise.
* grub-core/loader/i386/bsd.c (freebsd_bootdev): New variable.
(freebsd_biosdev): Likewise.
(grub_freebsd_boot): Use freebsd_bootdev and freebsd_biosdev.
(grub_cmd_freebsd): Set freebsd_bootdev and freebsd_biosdev.
used e.g. for initrd or modules. Moreover gzip handling of not
easily seekable files is buggy. Disable unknown file size for now. May
be inefficient but works.
* grub-core/io/gzio.c (test_header): Always retrieve the file size.
* grub-core/io/xzio.c (grub_xzio_open): Likewise.
previous patch increased the size of the RS code by 20 bytes (at
least with gcc-4.4), so increase this by 20 bytes to match.
(GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_PART): Likewise.
scratch area. Make sure to initialise chosen in standalone mode as
well as non-standalone.
Reported by: Robert Hooker and Andy Whitcroft.
Tested by: Andy Whitcroft.
comment. Add an extra layer of quotation, requiring the output of
this function to be used in a printf format string.
(gettext_printf): New function.
* util/grub.d/10_hurd.in: Use gettext_printf where appropriate.
Extract translatable strings from here-documents and use a temporary
variable instead, so that xgettext can find them.
* util/grub.d/10_kfreebsd.in: Likewise.
* util/grub.d/10_linux.in: Likewise.
* util/grub.d/20_linux_xen.in: Likewise.
* po/grub.d.sed: New file.
* po/Makefile.in.in ($(DOMAIN).pot-update): Extract gettext_printf
arguments. Set c-format flags on all strings extracted from
util/grub.d/ (xgettext refuses to include these itself for strings
it extracted from a shell file, but these really are c-format).
.mo/.mo.gz opening sequence to ...
(grub_mofile_open_lang): ... here.
(grub_gettext_init_ext): If opening ll_CC fails, try ll.
* util/grub.d/00_header.in (grub_lang): Include country part of
locale.
Reported by: Mario Limonciello.
* grub-core/loader/i386/bsd.c
(grub_cmd_freebsd_loadenv, grub_cmd_freebsd_module_elf): Check
whether kernel is loaded using grub_loader_is_loaded(), rather
than `kernel_type', which may still be `KERNEL_TYPE_NONE' under
certain error conditions.
* util/grub-probe.c (probe): Remember which disk was detected as
RAID (perhaps an LVM physical volume). Use that disk's raidname
rather than that of the top-level disk.
Remove byte-swapping function calls, which are not valid in
structure initialisers.
* grub-core/partmap/gpt.c (grub_gpt_partition_type_bios_boot): Make
non-const.
(GRUB_MOD_INIT): Byte-swap data1, data2, and data3 fields of
grub_gpt_partition_type_bios_boot.
[GRUB_MACHINE_MIPS_YEELOONG || GRUB_MACHINE_QEMU]: ifdef-ed out
(now unused).
(grub_keyboard_controller_init)
[GRUB_MACHINE_MIPS_YEELOONG || GRUB_MACHINE_QEMU]: Don't attempt to
read the initial state since controller isn't inited yet.
* grub-core/fs/udf.c (GRUB_UDF_LOG2_BLKSIZE): Removed.
(GRUB_UDF_BLKSZ): Removed.
(struct grub_udf_data): New field "lbshift" to hold the logical block
size of the file system in log2 format. All users updated.
(sblocklist): Change type to unsigned.
(grub_udf_mount): Change type of "sblklist" to unsigned.
Move AVDP search before VRS recognition, because the latter requires
knowledge of the logical block size, which is detected during the
former.
Detect and validate logical block size during AVDP search, adding
support for block sizes 512, 1024 and 4096.
Make VRS recognition independent of block size.
* include/grub/elfload.h (grub_elf32_size): New parameter. All users updated.
Return maximum segments alignment.
(grub_elf64_size): Likewise.
* kern/elf.c (grub_elf32_size): New parameter. All users updated.
Return maximum segments alignment.
(grub_elf64_size): Likewise.
* grub-core/loader/powerpc/ieee1275/linux.c:
(grub_linux_claimmap_iterate): New function. Uses the "available"property
in the "memory" node for memory allocation for kernel in the PowerPC loader.
(grub_linux_load32): Correctly find linux entry point offset.
(grub_linux_load64): Likewise.
On mips-yeeloong, build with -march=loongson2f when this flag is
available (GCC >= 4.4).
* conf/Makefile.common [COND_mips_yeeloong] (CFLAGS_PLATFORM): Remove
`-march=mips3'.
* configure.ac: For mips-yeeloong, add -march=loongson2f if available,
or otherwise add -march=mips3.
