* boot/i386/pc/boot.S (boot_drive_check): Add a comment indicating
which instruction is modified by grub-setup during installation
(since it wasn't obvious by only looking at this file).
Clean up the code to support 64-bit addressing in disks and
files. This change is not enough for filesystems yet.
* util/i386/pc/grub-setup.c (struct boot_blocklist): Change the
type of "start" to grub_uint64_t.
(setup): Change the types of KERNEL_SECTOR and FIRST_SECTOR to
grub_disk_addr_t * and grub_disk_addr_t. Fix the format string in
save_first_sector and save_blocklists. Use grub_le_to_cpu64 to
convert addresses.
* util/i386/pc/biosdisk.c (open_device): Change the type of SECTOR
to grub_disk_addr_t.
* partmap/gpt.c (gpt_partition_map_iterate): Fix the format
string.
* partmap/pc.c (pc_partition_map_iterate): Likewise.
* partmap/amiga.c (amiga_partition_map_iterate): Cast RDSK.MAGIC
to char *.
* normal/script.c (grub_script_parse): Remove unused MEMFREE.
* normal/parser.y (YYLTYPE_IS_TRIVIAL): New macro.
* normal/lexer.c (grub_script_yyerror): Specify unused to LEX.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf64): Cast -1
to grub_off_t, to detect an error from grub_file_seek.
(grub_multiboot_load_elf32): Likewise.
* kern/misc.c (grub_strtoul): Use grub_strtoull. Return the
maximum unsigned long value when an overflow is detected.
(grub_strtoull): New function.
(grub_divmod64): Likewise.
(grub_lltoa): use grub_divmod64.
* kern/fs.c (struct grub_fs_block): Change the type of "offset" to
grub_disk_addr_t.
(grub_fs_blocklist_open): Increase P if P is not NULL to advance
the pointer to next character. Use grub_strtoull instead of
grub_strtoul.
(grub_fs_blocklist_read): Change the types of SECTOR, OFFSET and
SIZE to grub_disk_addr_t, grub_off_t and grub_size_t,
respectively.
* kern/file.c (grub_file_read): Prevent an oveflow of LEN, as the
return value is signed.
(grub_file_seek): Change the type of OLD to grub_off_t. Do not
test if OFFSET is less than zero, as OFFSET is unsigned now.
* kern/disk.c (struct grub_disk_cache): Change the type of
"sector" to grub_disk_addr_t.
(grub_disk_cache_get_index): Change the type of SECTOR to
grub_disk_addr_t. Calculate the hash with SECTOR casted to
unsigned after shifting.
(grub_disk_cache_invalidate): Change the type of SECTOR to
grub_disk_addr_t.
(grub_disk_cache_unlock): Likewise.
(grub_disk_cache_store): Likewise.
(grub_disk_check_range): Change the types of SECTOR, OFFSET, SIZE,
START and LEN to grub_disk_addr_t *, grub_off_t *, grub_size_t,
grub_disk_addr_t and grub_uint64_t, respectively.
(grub_disk_read): Use an unsigned variable REAL_OFFSET for the
body, as the value of OFFSET is tweaked by
grub_disk_check_range. Change the types of START_SECTOR, LEN and
POS to grub_disk_addr_t, grub_size_t and grub_size_t,
respectively.
(grub_disk_write): Use an unsigned variable REAL_OFFSET for the
body, as the value of OFFSET is tweaked by
grub_disk_check_range. Change the types of LEN and N to
grub_size_t.
* io/gzio.c (struct grub_gzio): Change the types of "data_offset"
and "saved_offset" to grub_off_t.
(test_header): Cast BUF to char *.
(get_byte): Cast GZIO->DATA_OFFSET to grub_off_t. Cast GZIO->INBUF
to char *.
(grub_gzio_read): Change the types of OFFSET and SIZE to
grub_off_t and grub_size_t, respectively.
* include/grub/i386/pc/boot.h (GRUB_BOOT_MACHINE_FORCE_LBA):
Removed.
(GRUB_BOOT_MACHINE_BOOT_DRIVE): Changed to 0x4c.
(GRUB_BOOT_MACHINE_KERNEL_ADDRESS): Changed to 0x40.
(GRUB_BOOT_MACHINE_KERNEL_SEGMENT): Changed to 0x42.
(GRUB_BOOT_MACHINE_DRIVE_CHECK): Changed to 0x4e.
(GRUB_BOOT_MACHINE_LIST_SIZE): Increased to 12.
* include/grub/types.h (grub_off_t): Unconditionally set to
grub_uint64_t.
(grub_disk_addr_t): Changed to grub_uint64_t.
* include/grub/partition.h (struct grub_partition): Change the
types of "start", "len" and "offset" to grub_disk_addr_t,
grub_uint64_t and grub_disk_addr_t, respectively.
(grub_partition_get_start): Return grub_disk_addr_t.
(grub_partition_get_len): Return grub_uint64_t.
* include/grub/misc.h (grub_strtoull): New prototype.
(grub_divmod64): Likewise.
* include/grub/fshelp.h (grub_fshelp_read_file): Change the types
of SECTOR, LEN and FILESIZE to grub_disk_addr_t, grub_size_t and
grub_off_t, respectively.
All callers and references changed.
* include/grub/fs.h (struct grub_fs): Change the type of LEN to
grub_size_t in "read".
All callers and references changed.
* include/grub/file.h (struct grub_file): Change the types of
"offset" and "size" to grub_off_t and grub_off_t,
respectively. Change the type of SECTOR to grub_disk_addr_t in
"read_hook".
(grub_file_read): Change the type of LEN to grub_size_t.
(grub_file_seek): Return grub_off_t. Change the type of OFFSET to
grub_off_t.
(grub_file_size): Return grub_off_t.
(grub_file_tell): Likewise.
All callers and references changed.
* include/grub/disk.h (struct grub_disk_dev): Change the types of
SECTOR and SIZE to grub_disk_addr_t and grub_size_t in "read" and
"write".
(struct grub_disk): Change the type of "total_sectors" to
grub_uint64_t. Change the type of SECTOR to grub_disk_addr_t in
"read_hook".
(grub_disk_read): Change the types of SECTOR, OFFSET and SIZE to
grub_disk_addr_t, grub_off_t and grub_size_t, respectively.
(grub_disk_write): Likewise.
All callers and references changed.
* fs/iso9660.c (grub_iso9660_susp_iterate): Cast parameters to
char * for grub_strncmp to silence gcc.
(grub_iso9660_mount): Likewise.
(grub_iso9660_mount): Likewise.
(grub_iso9660_read_symlink): Likewise. Also, remove the nonsense
return statement.
(grub_iso9660_iterate_dir): Likewise.
(grub_iso9660_label): Cast DATA->VOLDESC.VOLNAME to char *.
* fs/hfs.c (grub_hfs_read_file): Change the types of SECTOR and
LEN to grub_disk_addr_t and grub_size_t, respectively.
* fs/hfsplus.c (grub_hfsplus_read_file): Likewise.
* fs/jfs.c (grub_jfs_read_file): Likewise.
* fs/minix.c (grub_jfs_read_file): Likewise.
* fs/sfs.c (grub_jfs_read_file): Likewise.
* fs/ufs.c (grub_jfs_read_file): Likewise.
* fs/xfs.c (grub_jfs_read_file): Likewise.
* fs/fat.c (grub_fat_read_data): Change the types of SECTOR, LEN
and SIZE to grub_disk_addr_t, grub_size_t and grub_size_t,
respectively.
* fs/ext2.c (grub_ext2_read_block): When an error happens, set
BLKNR to -1 instead of returning GRUB_ERRNO.
(grub_ext2_read_file): Change the types of SECTOR and
LEN to grub_disk_addr_t and grub_size_t, respectively.
* fs/affs.c (grub_affs_read_file): Change the types of SECTOR and
LEN to grub_disk_addr_t and grub_size_t, respectively.
* font/manager.c (grub_font_get_glyph): Cast BITMAP to char * for
grub_file_read.
* disk/ieee1275/ofdisk.c (grub_ofdisk_read): Fix the format
string. Do not cast SECTOR explicitly.
* disk/i386/pc/biosdisk.c (grub_biosdisk_open): Change the type of
TOTAL_SECTORS to grub_uint64_t. Do not mask DRP->TOTAL_SECTORS.
(grub_biosdisk_rw): Change the types of SECTOR and SIZE to
grub_disk_addr_t and grub_size_t, respectively. If the sector is
over 2TB and LBA mode is not supported, raise an error.
(get_safe_sectors): New function.
(grub_biosdisk_read): Use get_safe_sectors.
(grub_biosdisk_write): Likewise.
* disk/efi/efidisk.c (grub_efidisk_read): Fix the format string.
(grub_efidisk_write): Likewise.
* disk/loopback.c (delete_loopback): Cosmetic changes.
(grub_cmd_loopback): Likewise. Also, test NEWDEV->FILENAME
correctly.
(grub_loopback_open): Likewise.
(grub_loopback_read): Likewise. Also, change the type of POS to
grub_off_t, and fix the usage of grub_memset.
* commands/i386/pc/play.c: Include grub/machine/time.h.
* commands/ls.c (grub_ls_list_files): Use "llu" instead of "d" to
print FILE->SIZE.
* commands/configfile.c: Include grub/env.h.
* commands/cmp.c (grub_cmd_cmp): Do not use ERR, but use
GRUB_ERRNO directly instead. Change the type of POS to
grub_off_t. Follow the coding standard.
* commands/blocklist.c: Include grub/partition.h.
(grub_cmd_blocklist): Return an error if the underlying device is
not a disk. Take the starting sector of a partition into account,
if a partition is used.
* boot/i386/pc/diskboot.S (bootloop): Adapted to the new offset of
a length field.
(lba_mode): Support 64-bit addresses.
(chs_mode): Likewise.
(copy_buffer): Adapted to the new offsets of a length field and a
segment field.
(blocklist_default_start): Allocate 64-bit space.
* boot/i386/pc/boot.S (force_lba): Removed.
(boot_drive): Moved to under KERNEL_SECTOR.
(kernel_sector): Moved to under KENREL_SEGMENT. Allocate 64-bit
space.
(real_start): Set %si earlier. Remove code for FORCE_LBA, since it
is useless.
(lba_mode): Refactored to support a 64-bit address. More size
optimization.
(setup_sectors): Likewise.
* DISTLIST: Replaced boot/powerpc/ieee1275/crt0.S and
boot/powerpc/ieee1275/cmain.c with kern/powerpc/ieee1275/crt0.S
and kern/powerpc/ieee1275/cmain.c, respectively.
* boot/powerpc/ieee1275/crt0.S: Moved to ...
* kern/powerpc/ieee1275/crt0.S: ... here.
* boot/powerpc/ieee1275/cmain.c: Moved to ...
* kern/powerpc/ieee1275/cmain.c: ... here.
* conf/powerpc-ieee1275.rmk (grubof_SOURCES): Use
kern/powerpc/ieee1275/crt0.S and kern/powerpc/ieee1275/cmain.c
instead of boot/powerpc/ieee1275/crt0.S and
boot/powerpc/ieee1275/cmain.c, respectively.
* boot/i386/pc/boot.S (lba_mode): Do not store the total number of
sectors. It was not used anyway.
* boot/i386/pc/boot.S (boot_drive_check): New label.
* include/grub/i386/pc/boot.h (GRUB_BOOT_MACHINE_DRIVE_CHECK): New
macro.
* util/i386/pc/grub-setup.c (setup): Added a workaround for BIOSes
which do not pass a boot drive correctly. Copied from GRUB Legacy.
* conf/i386-pc.rmk (pxeboot_img_LDFLAGS): The text address should
be 0x7C00 instead of 0x8000.
* boot/i386/pc/pxeboot.S: Rewritten.
* kern/i386/pc/startup.S (gate_a20_try_bios): No need to specify
EXT_C.
(gate_a20_check_state): Read a byte from 0x108000. Invert the
result.
* conf/i386-pc.rmk (pkgdata_IMAGE): Add pxeboot.img.
(pxeboot_img_SOURCES): New variable.
(pxeboot_img_ASFLAGS): Likewise.
(pxeboot_img_LDFLAGS): Likewise.
* boot/i386/pc/pxeboot.S: New file. Based on pxeloader.S from
GRUB Legacy and boot.S. Adopted for GRUB 2 by lode leroy
<lode_leroy@hotmail.com>.
All symbols prefixed with PUPA_ and pupa_ are renamed to GRUB_
and grub_, respectively. Because the conversion is trivial and
mechanical, I omit the details here. Please refer to the CVS
if you need more information.
* include/i386/pc/util/biosdisk.h: New file.
* util/i386/pc/biosdisk.c: Likewise.
* util/i386/pc/pupa-setup.c: Likewise.
* Makefile.in (INCLUDE_DISTFILES): Added
include/pupa/i386/pc/util/biosdisk.h.
(UTIL_DISTFILES): Added biosdisk.c and pupa-setup.c under the
directory util/i386/pc.
(install-local): Added a rule for sbin_UTILITIES.
(uninstall): Likewise.
* util/i386/pc/pupa-mkimage.c (usage): Fix a typo in the doc.
* util/misc.c (xrealloc): New function.
(pupa_malloc): Likewise.
(pupa_free): Likewise.
(pupa_realloc): Likewise.
(pupa_stop): Likewise.
(pupa_putchar): Likewise.
* kern/disk.c (pupa_disk_read): Prevent L from underflowing.
* include/pupa/util/misc.h (xrealloc): Declared.
* include/pupa/i386/pc/boot.h (PUPA_BOOT_MACHINE_BPB_START): New
macro.
(PUPA_BOOT_MACHINE_BPBEND): Renamed to ...
(PUPA_BOOT_MACHINE_BPB_END): ... this.
* include/pupa/fs.h [PUPA_UTIL] (pupa_fat_init): Declared.
[PUPA_UTIL] (pupa_fat_fini): Likewise.
* fs/fat.c [PUPA_UTIL] (pupa_fat_init): Defined. Maybe a better
way should be implemented.
[PUPA_UTIL] (pupa_fat_fini): Likewise.
* disk/i386/pc/biosdisk.c (pupa_biosdisk_call_hook): Increase
the size of NAME for safety.
(pupa_biosdisk_iterate): Search hard disks to 0x90 instead of
0x88.
* conf/i386-pc.rmk (sbin_UTILITIES): New variable.
(pupa_setup_SOURCES): Likewise.
* genmk.rb (Utility#rule): Add $(BUILD_CFLAGS) into the rules.
