util/grub-mkimagexx.c is included in a special way into mkimage.c.
Interoperation between defines makes this very tricky. Instead
just have a clean interface and compile util/grub-mkimage*.c separately
from mkimage.c
all_video module does not have any code or data and exists solely for
.moddeps section to pull in dependencies. This makes all symbols unneeded.
While in current binutils (last released version as of this commit is 2.26)
``strip --strip-unneeded'' unintentionally adds section symbols for each
existing section, this behavior was considered a bug and changed in commit
14f2c699ddca1e2f706342dffc59a6c7e23e844c to completely strip symbol table
in this case.
Older binutils (verified with 2.17) and some other toolchains (at least
elftoolchain r3223M), both used in FreeBSD, remove symbol table in all_video
as well.
Relax run-time check and do not return error for modules without symbol table.
Add additional checks to module verifier to make sure such modules
a) have non-empty .moddeps section. Without either externally visible symbols
or .moddeps modules are completely useless and should not be built.
b) do not have any relocations.
Closes: 46986
v2: add run-time check for empty symbol table if relocations are present as
suggested by Vladimir.
If root filesystem is multidev btrfs, do not attempt to pass all devices as
kernel root= argument. This results in splitting command line in GRUB due to
embedded newline and even if we managed to quote it, kernel does not know how
to interpret it anyway. Multidev btrfs requires user space device scanning,
so passing single device would not work too.
This still respects user settings GRUB_DISABLE_LINUX_UUID. Not sure what we
should do in this case.
Closes: 45709
Currently only Windows gets distinguished icons, everything else is displayed
using the same generic one. Add additional --class based on os-prober returned
label, which usually is expected to match primary distribution name.
Also use it for Windows as well - chainloader prober may actually return
different strings (Windows, MS-DOS, Windows9xME).
This did not cause real problem but is good for reproducible builds. I hit
it with recent bootinfoscript that displays embedded config; I was puzzled
by random garbage at the end.
Prezero memory buffer used to assemble core.img. This makes individual
memset redundant. Also ensure buffer is filled with zeroes in several other
places.
Also remove redundant zeroing code where we fill in the whole memory block
anyway.
Incorrect drive name was being passed into grub_util_sparc_setup,
causing the grub-install to fail.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Current code in probe() could not be verified to not contain memory leaks.
Restructure code and ensure grub_device_close is always called at the end of
loop.
Calms down Coverity scan.
CID: 73739
canonicalize_file_name clashed with gnulib function. Additionally
it was declared in 2 places: emu/misc.h and util/misc.h. Added
grub_ prefix and removed second declaration.
gcc5 reports:
../util/mkimage.c: In function 'grub_install_get_image_target':
../util/mkimage.c:954:5: error: loop exit may only be reached after undefined behavior [-Werror=aggressive-loop-optimizations]
&& j < ARRAY_SIZE (image_targets[i].names); j++)
^
../util/mkimage.c:953:39: note: possible undefined statement is here
for (j = 0; image_targets[i].names[j]
^
Well, let's move the index 'j' test before accesing the array to:
1) make the loop obvious
2) make gcc happy
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
When booted from stick, EFI would use GPT partition and our root
device detection algortihm depends on GRUB's ability to see the same
partitions. Hence include msdos and gpt partmap modules on EFI even when
they're not needed to access root filesystem.
util/grub-mkconfig_lib.in(version_test_gt): "echo -n" is not really needed,
final newline is stripped by command substitution.
util/grub.d/10_kfreebsd.in, util/grub.d/10_linux.in,
util/grub.d/20_linux_xen.in: change how list is built, to avoid echo -n
completely.
util/grub.d/30_os-prober.in: add spaces to printed line directly
Closes 43668.
* util/grub.d/30_os-prober.in: Tolerate devices with no filesystem
UUID. Other parts of grub-mkconfig tolerate these, they were
previously allowed here up to commit
55e706c918, and they can arise in
practice when the system has active LVM snapshots.
Fixes Ubuntu bug #1287436.
Commit 588744d0dc caused grub-mkconfig
no longer to be forgiving of trailing spaces on grub-probe output
lines, which among other things means that util/grub.d/10_linux.in
no longer detects LVM. To fix this, make grub-probe's output
delimiting more consistent. As a bonus, this improves the coverage
of the -0 option.
Fixes Debian bug #735935.
* grub-core/disk/cryptodisk.c
(grub_util_cryptodisk_get_abstraction): Add a user-data argument.
* grub-core/disk/diskfilter.c (grub_diskfilter_get_partmap):
Likewise.
* include/grub/cryptodisk.h (grub_util_cryptodisk_get_abstraction):
Update prototype.
* include/grub/diskfilter.h (grub_diskfilter_get_partmap): Likewise.
* util/grub-install.c (push_partmap_module, push_cryptodisk_module,
probe_mods): Adjust for extra user-data arguments.
* util/grub-probe.c (do_print, probe_partmap, probe_cryptodisk_uuid,
probe_abstraction): Use configured delimiter. Update callers.
In file included from util/misc.c:36:0:
./include/grub/emu/misc.h:56:1: error: 'libintl_printf' is an unrecognized format function type [-Werror=format=]
char * EXPORT_FUNC(xasprintf) (const char *fmt, ...) __attribute__ ((format (printf, 1, 2))) WARN_UNUSED_RESULT;
^
./include/grub/emu/misc.h:58:1: error: 'libintl_printf' is an unrecognized format function type [-Werror=format=]
The reason is libintl.h which redefines printf as libintl_printf. The problem
is not present in native MinGW build which avoids redefinition. Use
(format (__printf__) instead which is valid replacement in GCC.
v2: add grub-core/lib/libgcrypt/src/g10lib.h
v3: modify g10lib.h during import
* util/grub.d/00_header.in (make_timeout): Use && rather than test
-a.
* util/grub.d/10_windows.in: Likewise.
* util/grub.d/10_netbsd.in (netbsd_load_fs_module): Use || rather
than test -o.
* util/grub.d/30_os-prober.in: Use && rather than test -a, and ||
rather than test -o.
On Mac rescue image is booted from HFS+ partition, so bootpath looks like
/ACPI(a0341d0,0)/PCI(1,1f)/ATAPI(0,0,0)/HD(3,5d1,ca3,0000000000000000,20,0)/EndEntire
grub fails to find device for this path because it cannot scan partition
table. The simplest fix is to add part_apple by default.
According to UEFI 2.4 specification, default boot file name on AArch64
is BOOTAA64.EFI (3.4.1.1 Removable Media Boot Behavior). Also set default
GRUB image name to grubaa64.efi to match it.
Split single string in help message into several strings used before in shell
grub-mkrescue to minimize changes to existing translations.
Reported by Benno Schulenberg
