* configure.ac: Rename yeeloong platform to loongson. All users updated.
* grub-core/Makefile.core.def (fwstart_fuloong): New image.
* grub-core/boot/mips/loongson/fuloong.S: New file.
* grub-core/boot/mips/loongson/fwstart.S: Wait for CS5536 to come up.
Explicitly init CS5536.
[FULOONG]: Don't use serial until CS5536 is available.
Set GPIO based on dumps.
(serial_hw_init) [FULOONG]: Handle CS5536 parts.
[FULOONG]: Handle GPIO and memory controller differences.
Parse machine type in $a2.
* grub-core/boot/mips/startup_raw.S: Determine and save the
architecture.
* grub-core/bus/cs5536.c (gpiodump): Move to fwstart.S.
(grub_cs5536_init_geode): Remove gpio part. Conditionalise DIVIL
init on architecture type.
* grub-core/kern/mips/loongson/init.c (grub_machine_init): Init
SIS315E. Don't init at_keyboard on fuloong.
(grub_halt): Support Fuloong.
* grub-core/kern/mips/startup.S [LOONGSON]: Save $s7.
* grub-core/loader/mips/linux.c (LOONGSON_MACHTYPE): Removed.
(loongson_machtypes): New array.
(grub_cmd_linux) [GRUB_MACHINE_MIPS_LOONGSON]: Pass the right machine
type.
* grub-core/term/ns8250.c (serial_get_divisor): New parameter port and
config. All users updated. Handle CS5536 serial.
* grub-core/term/serial.c (grub_serial_register): Conditionalise
default port on machine type. Register serial as inactive.
* grub-core/video/sis315pro.c: New file.
* include/grub/cs5536.h (GRUB_CS5536_MSR_MAILBOX_CONFIG_ENABLED): New
definition.
(GRUB_CS5536_MSR_MAILBOX_CONFIG): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART1_COM1): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART2_COM3): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART1_CONF): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART2_CONF): Likewise.
* include/grub/mips/loongson.h (GRUB_CPU_LOONGSON_SHUTDOWN_GPIO): Rename
to ...
(GRUB_CPU_YEELOONG_SHUTDOWN_GPIO): ... this.
* include/grub/mips/loongson/kernel.h (GRUB_ARCH_MACHINE_YEELOONG): New
definition.
(GRUB_ARCH_MACHINE_FULOONG): Likewise.
(grub_arch_machine): New extern var.
* include/grub/mips/loongson/serial.h
(GRUB_MACHINE_SERIAL_DIVISOR_115200): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0_DIVISOR_115200): ... this.
(GRUB_MACHINE_SERIAL_PORT): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0): ... this.
(GRUB_MACHINE_SERIAL_PORT2_DIVISOR_115200): New definition.
(GRUB_MACHINE_SERIAL_PORT1): Likewise.
(GRUB_MACHINE_SERIAL_PORT2): Likewise.
(GRUB_MACHINE_SERIAL_PORTS): Include ports 1 and 2.
* include/grub/term.h (grub_term_register_input_inactive): New inline
function.
(grub_term_register_output_inactive): Likewise.
* include/grub/video.h (grub_video_driver_id): New value
GRUB_VIDEO_DRIVER_SIS315PRO.
* util/grub-mkimage.c (image_target_desc): Rename name to dirname.
New field "names". All users updated.
New field value IMAGE_FULOONG_FLASH.
(generate_image): USe separate fwstart hashes for yeeloong and fuloong.
video adapter has not necessarily yet been set. Use grub_video_vbe_get_edid
and grub_video_edid_checksum directly instead. Remove grub_video_get_edid
as it now has no users.
Reported by: Marjo Mercado.
* grub-core/video/i386/pc/vbe.c (grub_vbe_bios_get_flat_panel_info):
New function.
(grub_vbe_bios_get_ddc_capabilities): Likewise.
(grub_vbe_bios_read_edid): Likewise.
(grub_vbe_edid_checksum): Likewise.
(grub_vbe_get_preferred_mode): Likewise. Try EDID followed by the
Flat Panel extension, in line with the X.org VESA driver.
(grub_video_vbe_setup): When the mode is "auto", try to get the
preferred mode from VBE, and use the largest mode that is no larger
than the preferred mode (some BIOSes expose a preferred mode that is
not in their mode list!). If this fails, fall back to 640x480 as a
safe conservative choice.
* include/grub/i386/pc/vbe.h (struct grub_vbe_flat_panel_info): New
structure.
(struct grub_vbe_edid_info): Likewise.
(grub_vbe_bios_get_flat_panel_info): Add prototype.
(grub_vbe_bios_get_ddc_capabilities): Likewise.
(grub_vbe_bios_read_edid): Likewise.
* util/grub.d/00_header.in (GRUB_GFXMODE): Default to "auto". This
is more appropriate on a wider range of platforms than 640x480.
* grub-core/Makefile.core.def (vbeinfo): Removed.
(vbetest): Removed.
(videoinfo): New module.
* grub-core/commands/i386/pc/vbeinfo.c: Removed.
* grub-core/commands/i386/pc/vbetest.c: Removed.
* grub-core/commands/videoinfo.c: New file.
* grub-core/commands/videotest.c (grub_cmd_videotest): Support mode
specification.
(grub_cmd_videotest) [GRUB_MACHINE_PCBIOS]: Load vbe.mod when invoked
as vbetest.
(GRUB_MOD_INIT) [GRUB_MACHINE_PCBIOS]: New command vbetest.
(GRUB_MOD_FINI) [GRUB_MACHINE_PCBIOS]: Unregister vbetest.
* grub-core/video/efi_gop.c (grub_video_gop_fill_mode_info): Fill
mode_number. New parameter mode. All users updated.
(grub_video_gop_iterate): New function.
(grub_video_efi_gop): New member iterate.
* grub-core/video/i386/pc/vbe.c (framebuffer): Removed leftover fields.
(grub_vbe_set_video_mode): Remove setting useless fields.
(vbe2videoinfo): New function.
(grub_video_vbe_iterate): Likewise.
(grub_video_vbe_setup): Use vbe2videoinfo.
(grub_video_vbe_print_adapter_specific_info): New function.
(grub_video_vbe_adapter): New fields iterate and
print_adapter_specific_info.
* include/grub/video.h (GRUB_VIDEO_MODE_*): Transform into enum.
All users updated.
(grub_video_mode_info): New field mode_number.
(grub_video_adapter): New fields iterate and
print_adapter_specific_info.
* grub-core/video/ieee1275.c (stdout_ihandle): New variable.
(have_setcolors): Likewise.
(grub_video_ieee1275_init): Fill stdout_ihandle and have_setcolors.
(grub_video_ieee1275_setup): Use grub_video_ieee1275_set_palette.
(grub_video_ieee1275_set_palette): Implement.
