* disk/raid.c (grub_raid_scan_device): Check for
`array->device[sb.this_disk.number]' rather than for
`array->device[sb.this_disk.number]->name', since the latter is not
garanteed to be accessible.
* include/grub/raid.h (struct grub_raid_array): Change type of `device'
to a grub_disk_t array.
* disk/raid.c (grub_raid_read): Replace `device[x].disk' accesses with
`device[x]'.
(grub_raid_scan_device): Replace `device[x].name' accesses with
`device[x]->name'. Simplify initialization of `array->device[x]'.
* disk/raid.c (grub_raid_open, grub_raid_scan_device): Add a few
grub_dprintf() calls.
* kern/disk.c (grub_disk_read): Include grub_errmsg in out of range
error message.
Patch from Jeroen Dekkers.
* disk/raid.c (grub_raid_scan_device): Reset `grub_errno' on disk
failure, since succesfuly reading all array members might not be
required.
* fs/cpio.c (grub_cpio_find_file): Return GRUB_ERR_NONE
(and set *ofs = 0) instead of GRUB_ERR_FILE_NOT_FOUND on
last block of a cpio or tar stream.
Check for "TRAILER!!!" instead of any empty data
block to detect last block of a cpio stream.
(grub_cpio_dir): Fix constness of variable np.
(grub_cpio_open): Return GRUB_ERR_FILE_NOT_FOUND if
cpio or tar trailer is detected. This fixes a crash
on open of a non existing file.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): Get physical
address of entry.
(grub_multiboot_load_elf64): Likewise.
(grub_multiboot): Initialize mbi structure.
* util/grub-fstest.c: Don't include unused header file script.h.
* conf/common.rmk (grub-fstest.c_DEPENDENCIES): Move to the begginning
of file.
(grub_fstest_SOURCES): Likewise.
* include/grub/term.h (GRUB_TERM_LEFT, GRUB_TERM_RIGHT)
(GRUB_TERM_UP, GRUB_TERM_DOWN, GRUB_TERM_HOME, GRUB_TERM_END)
(GRUB_TERM_DC, GRUB_TERM_PPAGE, GRUB_TERM_NPAGE, GRUB_TERM_ESC)
(GRUB_TERM_TAB, GRUB_TERM_BACKSPACE): New macros.
* kern/i386/pc/startup.S: Include `<grub/term.h>'.
(translation_table): Replace hardcoded values with macros
provided by `<grub/term.h>'.
* term/i386/pc/at_keyboard.c: Include `<grub/term.h>'.
(keyboard_map): Correct/add a few values, with macros provided
by `<grub/term.h>'.
(keyboard_map_shift): Zero values that don't differ from their
`keyboard_map' equivalents.
(grub_console_checkkey): Optimize KEYBOARD_STATUS_CAPS_LOCK toggling.
Discard the second scan code that is always sent by Caps lock.
Only use `keyboard_map_shift' when it provides a non-zero value,
otherwise fallback to `keyboard_map'.
Make grub-setup handle a separate root device.
* util/i386/pc/grub-setup.c (setup): Always open the root device,
so that the root device can be compared with the destination
device.
When embedding the core image, if the root and destination devices
are different, set ROOT_DRIVE to ROOT_DEV->DISK->ID. Otherwise, to
0xFF.
When not embedding, set ROOT_DRIVE to 0xFF.
Add support for having a grub directory in a different drive. This
is still only the data handling part.
* kern/i386/pc/startup.S (multiboot_trampoline): Set %dh to 0xFF.
(codestart): Save %dh in GRUB_ROOT_DRIVE.
(grub_root_drive): New variable.
* kern/i386/pc/init.c (make_install_device): Use GRUB_ROOT_DRIVE
instead of GRUB_BOOT_DRIVE to construct a device name. Set
GRUB_ROOT_DRIVE to GRUB_BOOT_DRIVE if it is 0xFF, otherwise use it
as it was.
* include/grub/i386/pc/kernel.h (grub_root_drive): New prototype.
* include/grub/i386/pc/boot.h (GRUB_BOOT_MACHINE_ROOT_DRIVE): New
macro.
(GRUB_BOOT_MACHINE_DRIVE_CHECK): Set to 0x4f.
* boot/i386/pc/pxeboot.S (_start): Set %dh to 0xFF. For now, this
is bogus, because PXE booting does not specify any drive
correctly.
* boot/i386/pc/lnxboot.S (reg_edx): Set the second byte to 0xFF. I
am not sure if this is really correct.
* boot/i386/pc/cdboot.S: Set %dh to 0xFF, because the root drive
is always identical to the boot drive when booting from a CD.
* boot/i386/pc/boot.S (MOV_MEM_TO_AL): Removed. Not needed any
longer.
(root_drive): New variable.
(real_start): Unconditionally set %dh to ROOT_DRIVE.
(setup_sectors): Push %dx right after popping it, because %dh will
be modified later.
(copy_buffer): Restore %dx.
* a/kern/i386/pc/startup.S (grub_chainloader_real_boot): Pop
%edx and %esi from stack only after grub_gate_a20() is called.
grub_gate_a20() clobbers %edx.
* conf/i386-pc.rmk (pkglib_IMAGES): Add cdboot.img.
(cdboot_img_SOURCES): New variable.
(cdboot_img_ASFLAGS): New variable.
(cdboot_img_LDFLAGS): New variable.
* boot/i386/pc/cdboot.S: New file.
* disk/i386/pc/biosdisk.c (cd_start): New variable.
(cd_count): Likewise.
(grub_biosdisk_get_drive): Add support for cd device.
(grub_biosdisk_call_hook): Likewise.
(grub_biosdisk_iterate): Likewise.
(grub_biosdisk_open): Likewise.
(GRUB_BIOSDISK_CDROM_RETRY_COUNT): New macro.
(grub_biosdisk_rw): Support reading from cd device.
(GRUB_MOD_INIT): Iterate cd devices.
* include/grub/i386/pc/biosdisk.h (GRUB_BIOSDISK_FLAG_CDROM): New macro.
(GRUB_BIOSDISK_MACHINE_CDROM_START): Likewise.
(GRUB_BIOSDISK_MACHINE_CDROM_END): Likewise.
* kern/i386/pc/init.c (make_install_device): Check for cd device.
* fs/ufs.c (INODE_BLKSZ): Fix incorrect value.
(grub_ufs_get_file_block): Fix indirect block calculation problem.
* fs/xfs.c (grub_xfs_sblock): New member log2_dirblk.
(grub_xfs_btree_node): New structure.
(grub_xfs_btree_root): New structure.
(grub_xfs_inode): New members nblocks, extsize, nextents and btree.
(GRUB_XFS_EXTENT_OFFSET): Use exts instead of inode->data.extents.
(GRUB_XFS_EXTENT_BLOCK): Likewise.
(GRUB_XFS_EXTENT_SIZE): Likewise.
(grub_xfs_read_block): Support btree format type.
(grub_xfs_iterate_dir): Use NESTED_FUNC_ATTR in call_hook.
Use directory block as basic unit.
* fs/fshelp.c (grub_fshelp_read_file): Bug fix for sparse block.
* aclocal.m4 (grub_i386_CHECK_REGPARM_BUG): Define NESTED_FUNC_ATTR as
__attribute__ ((__regparm__ (1))).
Correct a mistake in previous commit.
* conf/i386-pc.rmk (normal/execute.c_DEPENDENCIES): Move to the
top.
(normal/command.c_DEPENDENCIES): New variable.
* util/powerpc/ieee1275/grub-mkrescue.in: New file.
* conf/powerpc-ieee1275.rmk: Add grub-mkrescue support for
PowerPC.
* DISTLIST: Add util/powerpc/ieee1275/grub-mkrescue.in.
to create a gap between _end and the modules added to the image
with grub-mkrescue. That fixes "CLAIM failed" on PowerMAC.
* kern/powerpc/ieee1275/init.c: Use GRUB_MOD_GAP.
* util/elf/grub-mkimage.c (add_segments): Likewise.
* fs/reiserfs.c (grub_fshelp_node): New member next_offset.
(grub_reiserfs_get_item): Save offset of the next item.
(grub_reiserfs_iterate_dir): Use next_offset to find next item.
that hang if GRUB tries to setup colors.
* term/ieee1275/ofconsole.c (grub_ofconsole_init): Don't set
colors for firmwares that don't support it.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_set_flag):
Recognize Open Hack'Ware, set flags to work around its
limitations.
* fs/ufs.c (GRUB_UFS_VOLNAME_LEN): New macro.
(grub_ufs_sblock): New member volume name.
(grub_ufs_find_file): Fix string copy bug.
(grub_ufs_label): Implement this function properly.
* fs/hfs.c (grub_hfs_cnid_type): New enum.
(grub_hfs_iterate_records): Use the correct file number for extents
and catalog file. Fix problem in next index calculation.
(grub_hfs_find_node): Replace recursive function call with loop.
(grub_hfs_iterate_dir): Replace recursive function call with loop.
* term/i386/pc/at_keyboard.c (grub_keyboard_isr): #ifdef out
grub_dprintf calls, since they make "debug=all" mode unusable.
(grub_console_checkkey): Likewise.
