/* ata.c - ATA disk access. */
/*
* GRUB -- GRand Unified Bootloader
* Copyright (C) 2007, 2008 Free Software Foundation, Inc.
*
* GRUB is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* GRUB is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with GRUB. If not, see .
*/
#include
#include
#include
#include
#include
#include
/* XXX: For now this only works on i386. */
#include
typedef enum
{
GRUB_ATA_CHS,
GRUB_ATA_LBA,
GRUB_ATA_LBA48
} grub_ata_addressing_t;
/* At the moment, only two IDE ports are supported. */
static const int grub_ata_ioaddress[] = { 0x1f0, 0x170 };
static const int grub_ata_ioaddress2[] = { 0x3f6, 0x376 };
#define GRUB_CDROM_SECTOR_SIZE 2048
#define GRUB_ATA_REG_DATA 0
#define GRUB_ATA_REG_ERROR 1
#define GRUB_ATA_REG_FEATURES 1
#define GRUB_ATA_REG_SECTORS 2
#define GRUB_ATA_REG_SECTNUM 3
#define GRUB_ATA_REG_CYLLSB 4
#define GRUB_ATA_REG_CYLMSB 5
#define GRUB_ATA_REG_LBALOW 3
#define GRUB_ATA_REG_LBAMID 4
#define GRUB_ATA_REG_LBAHIGH 5
#define GRUB_ATA_REG_DISK 6
#define GRUB_ATA_REG_CMD 7
#define GRUB_ATA_REG_STATUS 7
#define GRUB_ATA_REG2_CONTROL 0
#define GRUB_ATA_STATUS_ERR 0x01
#define GRUB_ATA_STATUS_INDEX 0x02
#define GRUB_ATA_STATUS_ECC 0x04
#define GRUB_ATA_STATUS_DRQ 0x08
#define GRUB_ATA_STATUS_SEEK 0x10
#define GRUB_ATA_STATUS_WRERR 0x20
#define GRUB_ATA_STATUS_READY 0x40
#define GRUB_ATA_STATUS_BUSY 0x80
enum grub_ata_commands
{
GRUB_ATA_CMD_READ_SECTORS = 0x20,
GRUB_ATA_CMD_READ_SECTORS_EXT = 0x24,
GRUB_ATA_CMD_WRITE_SECTORS = 0x30,
GRUB_ATA_CMD_WRITE_SECTORS_EXT = 0x34,
GRUB_ATA_CMD_IDENTIFY_DEVICE = 0xEC,
GRUB_ATA_CMD_IDENTIFY_PACKET_DEVICE = 0xA1,
GRUB_ATA_CMD_PACKET = 0xA0,
GRUB_ATA_CMD_EXEC_DEV_DIAGNOSTICS = 0x90
};
struct grub_ata_device
{
/* IDE port to use. */
int port;
/* IO addresses on which the registers for this device can be
found. */
int ioaddress;
int ioaddress2;
/* Two devices can be connected to a single cable. Use this field
to select device 0 (commonly known as "master") or device 1
(commonly known as "slave"). */
int device;
/* Addressing methods available for accessing this device. If CHS
is only available, use that. Otherwise use LBA, except for the
high sectors. In that case use LBA48. */
grub_ata_addressing_t addr;
/* Sector count. */
grub_uint64_t size;
/* CHS maximums. */
grub_uint16_t cylinders;
grub_uint16_t heads;
grub_uint16_t sectors_per_track;
/* Set to 0 for ATA, set to 1 for ATAPI. */
int atapi;
struct grub_ata_device *next;
};
static struct grub_ata_device *grub_ata_devices;
static inline void
grub_ata_regset (struct grub_ata_device *dev, int reg, int val)
{
grub_outb (val, dev->ioaddress + reg);
}
static inline int
grub_ata_regget (struct grub_ata_device *dev, int reg)
{
return grub_inb (dev->ioaddress + reg);
}
static inline void
grub_ata_regset2 (struct grub_ata_device *dev, int reg, int val)
{
grub_outb (val, dev->ioaddress2 + reg);
}
static inline int
grub_ata_regget2 (struct grub_ata_device *dev, int reg)
{
return grub_inb (dev->ioaddress2 + reg);
}
/* Wait until the device DEV has the status set to ready. */
static inline void
grub_ata_wait_busy (struct grub_ata_device *dev)
{
while ((grub_ata_regget (dev, GRUB_ATA_REG_STATUS) & GRUB_ATA_STATUS_BUSY));
}
static inline void
grub_ata_wait_drq (struct grub_ata_device *dev)
{
while (! (grub_ata_regget (dev, GRUB_ATA_REG_STATUS) & GRUB_ATA_STATUS_DRQ));
}
static inline void
grub_ata_wait (void)
{
grub_millisleep (50);
}
/* Byteorder has to be changed before strings can be read. */
static inline void
grub_ata_strncpy (char *dst, char *src, grub_size_t len)
{
grub_uint16_t *src16 = (grub_uint16_t *) src;
grub_uint16_t *dst16 = (grub_uint16_t *) dst;
unsigned int i;
for (i = 0; i < len / 2; i++)
*(dst16++) = grub_be_to_cpu16(*(src16++));
dst[len] = '\0';
}
static int
grub_ata_pio_read (struct grub_ata_device *dev, char *buf,
grub_size_t size)
{
grub_uint16_t *buf16 = (grub_uint16_t *) buf;
unsigned int i;
if (grub_ata_regget (dev, GRUB_ATA_REG_STATUS) & GRUB_ATA_STATUS_ERR)
return grub_ata_regget (dev, GRUB_ATA_REG_ERROR);
/* Wait until the data is available. */
grub_ata_wait_drq (dev);
/* Read in the data, word by word. */
for (i = 0; i < size / 2; i++)
buf16[i] = grub_le_to_cpu16 (grub_inw(dev->ioaddress + GRUB_ATA_REG_DATA));
if (grub_ata_regget (dev, GRUB_ATA_REG_STATUS) & GRUB_ATA_STATUS_ERR)
return grub_ata_regget (dev, GRUB_ATA_REG_ERROR);
return 0;
}
static grub_err_t
grub_ata_pio_write (struct grub_ata_device *dev, char *buf,
grub_size_t size)
{
grub_uint16_t *buf16 = (grub_uint16_t *) buf;
unsigned int i;
if (grub_ata_regget (dev, GRUB_ATA_REG_STATUS) & GRUB_ATA_STATUS_ERR)
return grub_ata_regget (dev, GRUB_ATA_REG_ERROR);
/* Wait until the device is ready to write. */
grub_ata_wait_drq (dev);
/* Write the data, word by word. */
for (i = 0; i < size / 2; i++)
grub_outw(grub_cpu_to_le16 (buf16[i]), dev->ioaddress + GRUB_ATA_REG_DATA);
if (grub_ata_regget (dev, GRUB_ATA_REG_STATUS) & GRUB_ATA_STATUS_ERR)
return grub_ata_regget (dev, GRUB_ATA_REG_ERROR);
return 0;
}
static void
grub_ata_dumpinfo (struct grub_ata_device *dev, char *info)
{
char text[41];
/* The device information was read, dump it for debugging. */
grub_ata_strncpy (text, info + 20, 20);
grub_dprintf ("ata", "Serial: %s\n", text);
grub_ata_strncpy (text, info + 46, 8);
grub_dprintf ("ata", "Firmware: %s\n", text);
grub_ata_strncpy (text, info + 54, 40);
grub_dprintf ("ata", "Model: %s\n", text);
if (! dev->atapi)
{
grub_dprintf ("ata", "Addressing: %d\n", dev->addr);
grub_dprintf ("ata", "Sectors: %lld\n", dev->size);
}
}
static grub_err_t
grub_atapi_identify (struct grub_ata_device *dev)
{
char *info;
info = grub_malloc (256);
if (! info)
return grub_errno;
grub_ata_wait_busy (dev);
grub_ata_regset (dev, GRUB_ATA_REG_DISK, 0xE0 | dev->device << 4);
grub_ata_regset (dev, GRUB_ATA_REG_CMD,
GRUB_ATA_CMD_IDENTIFY_PACKET_DEVICE);
grub_ata_wait ();
grub_ata_pio_read (dev, info, 256);
dev->atapi = 1;
grub_ata_dumpinfo (dev, info);
grub_free (info);
return 0;
}
static grub_err_t
grub_atapi_packet (struct grub_ata_device *dev, char *packet)
{
grub_ata_regset (dev, GRUB_ATA_REG_DISK, dev->device << 4);
grub_ata_regset (dev, GRUB_ATA_REG_FEATURES, 0);
grub_ata_regset (dev, GRUB_ATA_REG_SECTORS, 0);
grub_ata_regset (dev, GRUB_ATA_REG_LBAHIGH, 0xFF);
grub_ata_regset (dev, GRUB_ATA_REG_LBAMID, 0xFF);
grub_ata_regset (dev, GRUB_ATA_REG_CMD, GRUB_ATA_CMD_PACKET);
grub_ata_wait ();
grub_ata_pio_write (dev, packet, 12);
return 0;
}
static grub_err_t
grub_ata_identify (struct grub_ata_device *dev)
{
char *info;
grub_uint16_t *info16;
int ataerr;
info = grub_malloc (GRUB_DISK_SECTOR_SIZE);
if (! info)
return grub_errno;
info16 = (grub_uint16_t *) info;
grub_ata_wait_busy (dev);
grub_ata_regset (dev, GRUB_ATA_REG_DISK, 0xE0 | dev->device << 4);
grub_ata_regset (dev, GRUB_ATA_REG_CMD, GRUB_ATA_CMD_IDENTIFY_DEVICE);
grub_ata_wait ();
ataerr = grub_ata_pio_read (dev, info, GRUB_DISK_SECTOR_SIZE);
if (ataerr & 4)
{
/* ATAPI device detected. */
grub_free(info);
return grub_atapi_identify (dev);
}
else if (ataerr)
{
/* Error. */
grub_free(info);
return grub_error (GRUB_ERR_UNKNOWN_DEVICE,
"device can not be identified");
}
/* Now it is certain that this is not an ATAPI device. */
dev->atapi = 0;
/* CHS is always supported. */
dev->addr = GRUB_ATA_CHS;
/* Check if LBA is supported. */
if (info16[49] & (1 << 9))
{
/* Check if LBA48 is supported. */
if (info16[83] & (1 << 10))
dev->addr = GRUB_ATA_LBA48;
else
dev->addr = GRUB_ATA_LBA;
}
/* Determine the amount of sectors. */
if (dev->addr != GRUB_ATA_LBA48)
dev->size = grub_le_to_cpu32(*((grub_uint32_t *) &info16[60]));
else
dev->size = grub_le_to_cpu64(*((grub_uint64_t *) &info16[100]));
/* Read CHS information. */
dev->cylinders = info16[1];
dev->heads = info16[3];
dev->sectors_per_track = info16[6];
grub_ata_dumpinfo (dev, info);
grub_free(info);
return 0;
}
static grub_err_t
grub_ata_device_initialize (int port, int device, int addr, int addr2)
{
struct grub_ata_device *dev;
struct grub_ata_device **devp;
grub_dprintf ("ata", "detecting device %d,%d (0x%x, 0x%x)\n",
port, device, addr, addr2);
dev = grub_malloc (sizeof(*dev));
if (! dev)
return grub_errno;
/* Setup the device information. */
dev->port = port;
dev->device = device;
dev->ioaddress = grub_ata_ioaddress[dev->port];
dev->ioaddress2 = grub_ata_ioaddress2[dev->port];
dev->next = NULL;
/* Try to detect if the port is in use by writing to it,
waiting for a while and reading it again. If the value
was preserved, there is a device connected. */
grub_ata_regset (dev, GRUB_ATA_REG_DISK, dev->device << 4);
grub_ata_wait ();
grub_ata_regset (dev, GRUB_ATA_REG_SECTORS, 0x5A);
grub_ata_wait ();
if (grub_ata_regget (dev, GRUB_ATA_REG_SECTORS) != 0x5A)
{
grub_free(dev);
return 0;
}
/* Detect if the device is present by issuing a EXECUTE
DEVICE DIAGNOSTICS command. */
grub_ata_regset (dev, GRUB_ATA_REG_DISK, dev->device << 4);
grub_ata_regset (dev, GRUB_ATA_REG_CMD,
GRUB_ATA_CMD_EXEC_DEV_DIAGNOSTICS);
grub_ata_wait ();
grub_dprintf ("ata", "Registers: %x %x %x %x\n",
grub_ata_regget (dev, GRUB_ATA_REG_SECTORS),
grub_ata_regget (dev, GRUB_ATA_REG_LBALOW),
grub_ata_regget (dev, GRUB_ATA_REG_LBAMID),
grub_ata_regget (dev, GRUB_ATA_REG_LBAHIGH));
/* Check some registers to see if the channel is used. */
if (grub_ata_regget (dev, GRUB_ATA_REG_SECTORS) == 0x01
&& grub_ata_regget (dev, GRUB_ATA_REG_LBALOW) == 0x01
&& grub_ata_regget (dev, GRUB_ATA_REG_LBAMID) == 0x14
&& grub_ata_regget (dev, GRUB_ATA_REG_LBAHIGH) == 0xeb)
{
grub_dprintf ("ata", "ATAPI signature detected\n");
}
else if (! (grub_ata_regget (dev, GRUB_ATA_REG_SECTORS) == 0x01
&& grub_ata_regget (dev, GRUB_ATA_REG_LBALOW) == 0x01
&& grub_ata_regget (dev, GRUB_ATA_REG_LBAMID) == 0x00
&& grub_ata_regget (dev, GRUB_ATA_REG_LBAHIGH) == 0x00))
{
grub_dprintf ("ata", "incorrect signature\n");
grub_free (dev);
return 0;
}
else
{
grub_dprintf ("ata", "ATA detected\n");
}
/* Use the IDENTIFY DEVICE command to query the device. */
if (grub_ata_identify (dev))
{
grub_free (dev);
return 0;
}
/* Register the device. */
for (devp = &grub_ata_devices; *devp; devp = &(*devp)->next);
*devp = dev;
return 0;
}
static int
grub_ata_pciinit (int bus, int device, int func, grub_pci_id_t pciid)
{
static int compat_use[2] = { 0 };
grub_pci_address_t addr;
grub_uint32_t class;
grub_uint32_t bar1;
grub_uint32_t bar2;
int rega;
int regb;
int i;
/* Read class. */
addr = grub_pci_make_address (bus, device, func, 2);
class = grub_pci_read (addr);
/* Check if this class ID matches that of a PCI IDE Controller. */
if (class >> 16 != 0x0101)
return 0;
for (i = 0; i < 2; i++)
{
/* Set to 0 when the channel operated in compatibility mode. */
int compat = (class >> (2 * i)) & 1;
rega = 0;
regb = 0;
/* If the channel is in compatibility mode, just assign the
default registers. */
if (compat == 0 && !compat_use[i])
{
rega = grub_ata_ioaddress[i];
regb = grub_ata_ioaddress2[i];
compat_use[i] = 0;
}
else if (compat)
{
/* Read the BARs, which either contain a mmapped IO address
or the IO port address. */
addr = grub_pci_make_address (bus, device, func, 4 + 2 * i);
bar1 = grub_pci_read (addr);
addr = grub_pci_make_address (bus, device, func, 5 + 2 * i);
bar2 = grub_pci_read (addr);
/* Check if the BARs describe an IO region. */
if ((bar1 & 1) && (bar2 & 1))
{
rega = bar1 & ~3;
regb = bar2 & ~3;
}
}
grub_dprintf ("ata",
"PCI dev (%d,%d,%d) compat=%d rega=0x%x regb=0x%x\n",
bus, device, func, compat, rega, regb);
if (rega && regb)
{
grub_ata_device_initialize (i, 0, rega, regb);
grub_ata_device_initialize (i, 1, rega, regb);
}
}
return 0;
}
static grub_err_t
grub_ata_initialize (void)
{
grub_pci_iterate (grub_ata_pciinit);
return 0;
}
static void
grub_ata_setlba (struct grub_ata_device *dev, grub_disk_addr_t sector,
grub_size_t size)
{
grub_ata_regset (dev, GRUB_ATA_REG_SECTORS, size);
grub_ata_regset (dev, GRUB_ATA_REG_LBALOW, sector & 0xFF);
grub_ata_regset (dev, GRUB_ATA_REG_LBAMID, (sector >> 8) & 0xFF);
grub_ata_regset (dev, GRUB_ATA_REG_LBAHIGH, (sector >> 16) & 0xFF);
}
static grub_err_t
grub_ata_setaddress (struct grub_ata_device *dev,
grub_ata_addressing_t addressing,
grub_disk_addr_t sector,
grub_size_t size)
{
grub_ata_wait_busy (dev);
switch (addressing)
{
case GRUB_ATA_CHS:
{
unsigned int cylinder;
unsigned int head;
unsigned int sect;
/* Calculate the sector, cylinder and head to use. */
sect = ((grub_uint32_t) sector % dev->sectors_per_track) + 1;
cylinder = (((grub_uint32_t) sector / dev->sectors_per_track)
/ dev->heads);
head = ((grub_uint32_t) sector / dev->sectors_per_track) % dev->heads;
if (sect > dev->sectors_per_track
|| cylinder > dev->cylinders
|| head > dev->heads)
return grub_error (GRUB_ERR_OUT_OF_RANGE,
"sector %d can not be addressed "
"using CHS addressing", sector);
grub_ata_regset (dev, GRUB_ATA_REG_SECTNUM, sect);
grub_ata_regset (dev, GRUB_ATA_REG_CYLLSB, cylinder & 0xFF);
grub_ata_regset (dev, GRUB_ATA_REG_CYLMSB, cylinder >> 8);
grub_ata_regset (dev, GRUB_ATA_REG_DISK, (dev->device << 4) | head);
break;
}
case GRUB_ATA_LBA:
if (size == 256)
size = 0;
grub_ata_setlba (dev, sector, size);
grub_ata_regset (dev, GRUB_ATA_REG_DISK,
0xE0 | (dev->device << 4) | ((sector >> 24) & 0x0F));
break;
case GRUB_ATA_LBA48:
if (size == 65536)
size = 0;
/* Set "Previous". */
grub_ata_setlba (dev, sector >> 24, size >> 8);
/* Set "Current". */
grub_ata_setlba (dev, sector, size);
grub_ata_regset (dev, GRUB_ATA_REG_DISK, 0xE0 | (dev->device << 4));
break;
}
return GRUB_ERR_NONE;
}
static grub_err_t
grub_ata_readwrite (grub_disk_t disk, grub_disk_addr_t sector,
grub_size_t size, char *buf, int rw)
{
struct grub_ata_device *dev = (struct grub_ata_device *) disk->data;
grub_size_t cnt;
grub_size_t batch;
grub_ata_addressing_t addressing;
int cmd;
int cmd_write;
unsigned int sect;
addressing = dev->addr;
if (addressing == GRUB_ATA_LBA48 && ((sector + size) >> 28) != 0)
{
batch = 65536;
cmd = GRUB_ATA_CMD_READ_SECTORS_EXT;
cmd_write = GRUB_ATA_CMD_WRITE_SECTORS_EXT;
}
else
{
if (addressing == GRUB_ATA_LBA48)
addressing = GRUB_ATA_LBA;
batch = 256;
cmd = GRUB_ATA_CMD_READ_SECTORS;
cmd_write = GRUB_ATA_CMD_WRITE_SECTORS;
}
cnt = size / batch;
/* Read/write batches of 256/65536 sectors, when more than 256/65536
sectors should be read/written. */
for (; cnt; cnt--)
{
if (grub_ata_setaddress (dev, addressing, sector, batch))
return grub_errno;
if (rw == 0)
{
/* Read 256/65536 sectors. */
grub_ata_regset (dev, GRUB_ATA_REG_CMD, cmd);
grub_ata_wait ();
for (sect = 0; sect < batch; sect++)
{
if (grub_ata_pio_read (dev, buf,
GRUB_DISK_SECTOR_SIZE))
return grub_error (GRUB_ERR_READ_ERROR, "ATA read error");
buf += GRUB_DISK_SECTOR_SIZE;
}
}
else
{
/* Write 256/65536 sectors. */
grub_ata_regset (dev, GRUB_ATA_REG_CMD, cmd_write);
grub_ata_wait ();
for (sect = 0; sect < batch; sect++)
{
if (grub_ata_pio_write (dev, buf,
GRUB_DISK_SECTOR_SIZE))
return grub_error (GRUB_ERR_WRITE_ERROR, "ATA write error");
buf += GRUB_DISK_SECTOR_SIZE;
}
}
sector += batch;
}
/* Read/write just a "few" sectors. */
if (grub_ata_setaddress (dev, addressing, sector, size % batch))
return grub_errno;
if (rw == 0)
{
/* Read sectors. */
grub_ata_regset (dev, GRUB_ATA_REG_CMD, cmd);
grub_ata_wait ();
for (sect = 0; sect < (size % batch); sect++)
{
if (grub_ata_pio_read (dev, buf, GRUB_DISK_SECTOR_SIZE))
return grub_error (GRUB_ERR_READ_ERROR, "ATA read error");
buf += GRUB_DISK_SECTOR_SIZE;
}
} else {
/* Write sectors. */
grub_ata_regset (dev, GRUB_ATA_REG_CMD, cmd_write);
grub_ata_wait ();
for (sect = 0; sect < (size % batch); sect++)
{
if (grub_ata_pio_write (dev, buf, GRUB_DISK_SECTOR_SIZE))
return grub_error (GRUB_ERR_WRITE_ERROR, "ATA write error");
buf += GRUB_DISK_SECTOR_SIZE;
}
}
return GRUB_ERR_NONE;
}
static int
grub_ata_iterate (int (*hook) (const char *name))
{
struct grub_ata_device *dev;
for (dev = grub_ata_devices; dev; dev = dev->next)
{
char devname[5];
grub_sprintf (devname, "ata%d", dev->port * 2 + dev->device);
if (hook (devname))
return 1;
}
return 0;
}
static grub_err_t
grub_ata_open (const char *name, grub_disk_t disk)
{
struct grub_ata_device *dev;
for (dev = grub_ata_devices; dev; dev = dev->next)
{
char devname[5];
grub_sprintf (devname, "ata%d", dev->port * 2 + dev->device);
if (grub_strcmp (name, devname) == 0)
break;
}
if (! dev)
return grub_error (GRUB_ERR_UNKNOWN_DEVICE, "Can't open device");
if (dev->atapi)
disk->total_sectors = 9000000; /* XXX */
else
disk->total_sectors = dev->size;
disk->id = (unsigned long) dev;
disk->has_partitions = !dev->atapi;
disk->data = dev;
return 0;
}
static void
grub_ata_close (grub_disk_t disk __attribute__((unused)))
{
}
struct grub_atapi_read
{
grub_uint8_t code;
grub_uint8_t reserved1;
grub_uint32_t lba;
grub_uint32_t length;
grub_uint8_t reserved2[2];
} __attribute__((packed));
static grub_err_t
grub_atapi_readsector (struct grub_ata_device *dev,
char *buf, grub_disk_addr_t sector)
{
struct grub_atapi_read readcmd;
readcmd.code = 0xA8;
readcmd.lba = grub_cpu_to_be32 (sector);
readcmd.length = grub_cpu_to_be32 (1);
grub_atapi_packet (dev, (char *) &readcmd);
grub_ata_wait ();
grub_ata_pio_read (dev, buf, GRUB_CDROM_SECTOR_SIZE);
return 0;
}
static grub_err_t
grub_ata_read (grub_disk_t disk, grub_disk_addr_t sector,
grub_size_t size, char *buf)
{
struct grub_ata_device *dev = (struct grub_ata_device *) disk->data;
int cdsector;
char *sbuf;
if (! dev->atapi)
return grub_ata_readwrite (disk, sector, size, buf, 0);
/* ATAPI is being used, so try to read from CDROM using ATAPI. */
sbuf = grub_malloc (GRUB_CDROM_SECTOR_SIZE);
if (! sbuf)
return grub_errno;
/* CDROMs have sectors of 2048 bytes, so chop them into pieces of
512 bytes. */
while (size > 0)
{
int rsize;
int offset;
int max;
cdsector = sector >> 2;
rsize = ((size * GRUB_DISK_SECTOR_SIZE > GRUB_CDROM_SECTOR_SIZE)
? GRUB_CDROM_SECTOR_SIZE : size * GRUB_DISK_SECTOR_SIZE);
offset = (sector & 3) * GRUB_DISK_SECTOR_SIZE;
max = GRUB_CDROM_SECTOR_SIZE - offset;
rsize = (rsize > max) ? max : rsize;
grub_atapi_readsector (dev, sbuf, cdsector);
grub_memcpy (buf + offset, sbuf, rsize);
buf += rsize;
size -= rsize / GRUB_DISK_SECTOR_SIZE;
sector += rsize / GRUB_DISK_SECTOR_SIZE;
}
grub_free (sbuf);
return 0;
}
static grub_err_t
grub_ata_write (grub_disk_t disk,
grub_disk_addr_t sector,
grub_size_t size,
const char *buf)
{
struct grub_ata_device *dev = (struct grub_ata_device *) disk->data;
if (! dev->atapi)
return grub_ata_readwrite (disk, sector, size, (char *) buf, 1);
return grub_error (GRUB_ERR_NOT_IMPLEMENTED_YET, "ATAPI write not supported");
}
static struct grub_disk_dev grub_atadisk_dev =
{
.name = "ATA",
.id = GRUB_DISK_DEVICE_ATA_ID,
.iterate = grub_ata_iterate,
.open = grub_ata_open,
.close = grub_ata_close,
.read = grub_ata_read,
.write = grub_ata_write,
.next = 0
};
GRUB_MOD_INIT(ata)
{
(void) mod; /* To stop warning. */
/* To prevent two drivers operating on the same disks. */
grub_disk_firmware_is_tainted = 1;
if (grub_disk_firmware_fini)
{
grub_disk_firmware_fini ();
grub_disk_firmware_fini = NULL;
}
/* ATA initialization. */
grub_ata_initialize ();
grub_disk_dev_register (&grub_atadisk_dev);
}
GRUB_MOD_FINI(ata)
{
grub_disk_dev_unregister (&grub_atadisk_dev);
}