vbatts/grub
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
grub/kern/i386/pc/startup.S
okuji 4b13b216f4 2004-04-04 Yoshinori K. Okuji <okuji@enbug.org> 
All symbols prefixed with PUPA_ and pupa_ are renamed to GRUB_
	and grub_, respectively. Because the conversion is trivial and
	mechanical, I omit the details here. Please refer to the CVS
	if you need more information.
2004-04-04 13:46:03 +00:00

1596 lines
29 KiB
ArmAsm
Raw Blame History

/*
* GRUB -- GRand Unified Bootloader
* Copyright (C) 1999,2000,2001,2002,2003 Free Software Foundation, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* Note: These functions defined in this file may be called from C.
* Be careful of that you must not modify some registers. Quote
* from gcc-2.95.2/gcc/config/i386/i386.h:
1 for registers not available across function calls.
These must include the FIXED_REGISTERS and also any
registers that can be used without being saved.
The latter must include the registers where values are returned
and the register where structure-value addresses are passed.
Aside from that, you can include as many other registers as you like.
ax,dx,cx,bx,si,di,bp,sp,st,st1,st2,st3,st4,st5,st6,st7,arg
{ 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }
*/
/*
* Note: GRUB is compiled with the options -mrtd and -mregparm=3.
* So the first three arguments are passed in %eax, %edx, and %ecx,
* respectively, and if a function has a fixed number of arguments
* and the number if greater than three, the function must return
* with "ret $N" where N is ((the number of arguments) - 3) * 4.
*/
#include <config.h>
#include <grub/symbol.h>
#include <grub/boot.h>
#include <grub/machine/boot.h>
#include <grub/machine/memory.h>
#include <grub/machine/console.h>
#include <grub/machine/linux.h>
#include <grub/machine/kernel.h>
#include <grub/machine/multiboot.h>
#define ABS(x) ((x) - EXT_C(start) + GRUB_BOOT_MACHINE_KERNEL_ADDR + 0x200)
.file "startup.S"
.text
/* Tell GAS to generate 16-bit instructions so that this code works
in real mode. */
.code16
.globl start, _start
start:
_start:
/*
* Guarantee that "main" is loaded at 0x0:0x8200.
*/
ljmp $0, $ABS(codestart)
/*
* Compatibility version number
*
* These MUST be at byte offset 6 and 7 of the executable
* DO NOT MOVE !!!
*/
. = EXT_C(start) + 0x6
.byte GRUB_BOOT_VERSION_MAJOR, GRUB_BOOT_VERSION_MINOR
/*
* This is a special data area 8 bytes from the beginning.
*/
. = EXT_C(start) + 0x8
VARIABLE(grub_total_module_size)
.long 0
VARIABLE(grub_kernel_image_size)
.long 0
VARIABLE(grub_compressed_size)
.long 0
VARIABLE(grub_install_dos_part)
.long 0xFFFFFFFF
VARIABLE(grub_install_bsd_part)
.long 0xFFFFFFFF
VARIABLE(grub_prefix)
.string "/boot/grub"
/*
* Leave some breathing room for the prefix.
*/
. = EXT_C(start) + 0x50
/* the real mode code continues... */
codestart:
cli /* we're not safe here! */
/* set up %ds, %ss, and %es */
xorw %ax, %ax
movw %ax, %ds
movw %ax, %ss
movw %ax, %es
/* set up the real mode/BIOS stack */
movl $GRUB_MEMORY_MACHINE_REAL_STACK, %ebp
movl %ebp, %esp
sti /* we're safe again */
/* save boot drive reference */
ADDR32 movb %dl, EXT_C(grub_boot_drive)
/* reset disk system (%ah = 0) */
int $0x13
/* transition to protected mode */
DATA32 call real_to_prot
/* The ".code32" directive takes GAS out of 16-bit mode. */
.code32
incl %eax
call EXT_C(grub_gate_a20)
/* decompress the compressed part and put the result at 1MB */
movl $0x100000, %esi
movl $(START_SYMBOL + GRUB_KERNEL_MACHINE_RAW_SIZE), %edi
pushl %esi
pushl EXT_C(grub_compressed_size)
pushl %edi
call lzo1x_decompress
addl $12, %esp
/* copy back the decompressed part */
movl %eax, %ecx
cld
rep
movsb
/* copy modules before cleaning out the bss */
movl EXT_C(grub_total_module_size), %ecx
movl EXT_C(grub_kernel_image_size), %esi
addl %ecx, %esi
addl $START_SYMBOL, %esi
decl %esi
movl $END_SYMBOL, %edi
addl %ecx, %edi
decl %edi
std
rep
movsb
/* clean out the bss */
movl $BSS_START_SYMBOL, %edi
/* compute the bss length */
movl $END_SYMBOL, %ecx
subl %edi, %ecx
/* clean out */
xorl %eax, %eax
cld
rep
stosb
/*
* Call the start of main body of C code.
*/
call EXT_C(grub_main)
/*
* This is the area for all of the special variables.
*/
.p2align 2 /* force 4-byte alignment */
protstack:
.long GRUB_MEMORY_MACHINE_PROT_STACK
VARIABLE(grub_boot_drive)
.long 0
VARIABLE(grub_start_addr)
.long START_SYMBOL
VARIABLE(grub_end_addr)
.long END_SYMBOL
VARIABLE(grub_apm_bios_info)
.word 0 /* version */
.word 0 /* cseg */
.long 0 /* offset */
.word 0 /* cseg_16 */
.word 0 /* dseg_16 */
.word 0 /* cseg_len */
.word 0 /* cseg_16_len */
.word 0 /* dseg_16_len */
/*
* This is the Global Descriptor Table
*
* An entry, a "Segment Descriptor", looks like this:
*
* 31 24 19 16 7 0
* ------------------------------------------------------------
* | | |B| |A| | | |1|0|E|W|A| |
* | BASE 31..24 |G|/|0|V| LIMIT |P|DPL| TYPE | BASE 23:16 |
* | | |D| |L| 19..16| | |1|1|C|R|A| |
* ------------------------------------------------------------
* | | |
* | BASE 15..0 | LIMIT 15..0 |
* | | |
* ------------------------------------------------------------
*
* Note the ordering of the data items is reversed from the above
* description.
*/
.p2align 2 /* force 4-byte alignment */
gdt:
.word 0, 0
.byte 0, 0, 0, 0
/* code segment */
.word 0xFFFF, 0
.byte 0, 0x9A, 0xCF, 0
/* data segment */
.word 0xFFFF, 0
.byte 0, 0x92, 0xCF, 0
/* 16 bit real mode CS */
.word 0xFFFF, 0
.byte 0, 0x9E, 0, 0
/* 16 bit real mode DS */
.word 0xFFFF, 0
.byte 0, 0x92, 0, 0
/* this is the GDT descriptor */
gdtdesc:
.word 0x27 /* limit */
.long gdt /* addr */
/*
* These next two routines, "real_to_prot" and "prot_to_real" are structured
* in a very specific way. Be very careful when changing them.
*
* NOTE: Use of either one messes up %eax and %ebp.
*/
real_to_prot:
.code16
cli
/* load the GDT register */
DATA32 ADDR32 lgdt gdtdesc
/* turn on protected mode */
movl %cr0, %eax
orl $GRUB_MEMORY_MACHINE_CR0_PE_ON, %eax
movl %eax, %cr0
/* jump to relocation, flush prefetch queue, and reload %cs */
DATA32 ljmp $GRUB_MEMORY_MACHINE_PROT_MODE_CSEG, $protcseg
.code32
protcseg:
/* reload other segment registers */
movw $GRUB_MEMORY_MACHINE_PROT_MODE_DSEG, %ax
movw %ax, %ds
movw %ax, %es
movw %ax, %fs
movw %ax, %gs
movw %ax, %ss
/* put the return address in a known safe location */
movl (%esp), %eax
movl %eax, GRUB_MEMORY_MACHINE_REAL_STACK
/* get protected mode stack */
movl protstack, %eax
movl %eax, %esp
movl %eax, %ebp
/* get return address onto the right stack */
movl GRUB_MEMORY_MACHINE_REAL_STACK, %eax
movl %eax, (%esp)
/* zero %eax */
xorl %eax, %eax
/* return on the old (or initialized) stack! */
ret
prot_to_real:
/* just in case, set GDT */
lgdt gdtdesc
/* save the protected mode stack */
movl %esp, %eax
movl %eax, protstack
/* get the return address */
movl (%esp), %eax
movl %eax, GRUB_MEMORY_MACHINE_REAL_STACK
/* set up new stack */
movl $GRUB_MEMORY_MACHINE_REAL_STACK, %eax
movl %eax, %esp
movl %eax, %ebp
/* set up segment limits */
movw $GRUB_MEMORY_MACHINE_PSEUDO_REAL_DSEG, %ax
movw %ax, %ds
movw %ax, %es
movw %ax, %fs
movw %ax, %gs
movw %ax, %ss
/* this might be an extra step */
/* jump to a 16 bit segment */
ljmp $GRUB_MEMORY_MACHINE_PSEUDO_REAL_CSEG, $tmpcseg
tmpcseg:
.code16
/* clear the PE bit of CR0 */
movl %cr0, %eax
andl $(~GRUB_MEMORY_MACHINE_CR0_PE_ON), %eax
movl %eax, %cr0
/* flush prefetch queue, reload %cs */
DATA32 ljmp $0, $realcseg
realcseg:
/* we are in real mode now
* set up the real mode segment registers : DS, SS, ES
*/
/* zero %eax */
xorl %eax, %eax
movw %ax, %ds
movw %ax, %es
movw %ax, %fs
movw %ax, %gs
movw %ax, %ss
/* restore interrupts */
sti
/* return on new stack! */
DATA32 ret
.code32
/*
* grub_gate_a20(int on)
*
* Gate address-line 20 for high memory.
*
* This routine is probably overconservative in what it does, but so what?
*
* It also eats any keystrokes in the keyboard buffer. :-(
*/
FUNCTION(grub_gate_a20)
movl %eax, %ecx
call gloop1
movb $0xd1, %al
outb $0x64
gloopint1:
inb $0x64
andb $0x02, %al
jnz gloopint1
movb $0xdd, %al
testl %ecx, %ecx
jz gdoit
orb $0x02, %al
gdoit:
outb $0x60
call gloop1
/* output a dummy command (USB keyboard hack) */
movb $0xff, %al
outb $0x64
call gloop1
ret
gloop1:
inb $0x64
andb $0x02, %al
jnz gloop1
gloop2:
inb $0x64
andb $0x01, %al
jz gloop2ret
inb $0x60
jmp gloop2
gloop2ret:
ret
#include "lzo1x.S"
/*
* This call is special... it never returns... in fact it should simply
* hang at this point!
*/
FUNCTION(grub_stop)
call prot_to_real
/*
* This next part is sort of evil. It takes advantage of the
* byte ordering on the x86 to work in either 16-bit or 32-bit
* mode, so think about it before changing it.
*/
FUNCTION(grub_hard_stop)
hlt
jmp EXT_C(grub_hard_stop)
/*
* grub_stop_floppy()
*
* Stop the floppy drive from spinning, so that other software is
* jumped to with a known state.
*/
FUNCTION(grub_stop_floppy)
movw $0x3F2, %dx
xorb %al, %al
outb %al, %dx
ret
/*
* grub_reboot()
*
* Reboot the system. At the moment, rely on BIOS.
*/
FUNCTION(grub_reboot)
call prot_to_real
.code16
/* cold boot */
movw $0x0472, %di
movw %ax, (%di)
ljmp $0xFFFF, $0x0000
.code32
/*
* grub_halt(int no_apm)
*
* Halt the system, using APM if possible. If NO_APM is true, don't use
* APM even if it is available.
*/
FUNCTION(grub_halt)
/* see if zero */
testl %eax, %eax
jnz EXT_C(grub_stop)
call prot_to_real
.code16
/* detect APM */
movw $0x5300, %ax
xorw %bx, %bx
int $0x15
jc EXT_C(grub_hard_stop)
/* don't check %bx for buggy BIOSes... */
/* disconnect APM first */
movw $0x5304, %ax
xorw %bx, %bx
int $0x15
/* connect APM */
movw $0x5301, %ax
xorw %bx, %bx
int $0x15
jc EXT_C(grub_hard_stop)
/* set APM protocol level - 1.1 or bust. (this covers APM 1.2 also) */
movw $0x530E, %ax
xorw %bx, %bx
movw $0x0101, %cx
int $0x15
jc EXT_C(grub_hard_stop)
/* set the power state to off */
movw $0x5307, %ax
movw $1, %bx
movw $3, %cx
int $0x15
/* shouldn't reach here */
jmp EXT_C(grub_hard_stop)
.code32
/*
* void grub_chainloader_real_boot (int drive, void *part_addr)
*
* This starts another boot loader.
*/
FUNCTION(grub_chainloader_real_boot)
pushl %edx
pushl %eax
call EXT_C(grub_dl_unload_all)
/* set up to pass boot drive */
popl %edx
/* ESI must point to a partition table entry */
popl %esi
/* Turn off Gate A20 */
xorl %eax, %eax
call EXT_C(grub_gate_a20)
call prot_to_real
.code16
ljmp $0, $GRUB_MEMORY_MACHINE_BOOT_LOADER_ADDR
.code32
/*
* void grub_linux_boot_zimage (void)
*/
VARIABLE(grub_linux_prot_size)
.long 0
VARIABLE(grub_linux_tmp_addr)
.long 0
VARIABLE(grub_linux_real_addr)
.long 0
FUNCTION(grub_linux_boot_zimage)
/* copy the kernel */
movl EXT_C(grub_linux_prot_size), %ecx
addl $3, %ecx
shrl $2, %ecx
movl $GRUB_LINUX_BZIMAGE_ADDR, %esi
movl $GRUB_LINUX_ZIMAGE_ADDR, %edi
cld
rep
movsl
FUNCTION(grub_linux_boot_bzimage)
call EXT_C(grub_dl_unload_all)
movl EXT_C(grub_linux_real_addr), %ebx
/* copy the real mode code */
movl EXT_C(grub_linux_tmp_addr), %esi
movl %ebx, %edi
movl $GRUB_LINUX_SETUP_MOVE_SIZE, %ecx
cld
rep
movsb
/* change %ebx to the segment address */
shrl $4, %ebx
movl %ebx, %eax
addl $0x20, %eax
movw %ax, linux_setup_seg
/* XXX new stack pointer in safe area for calling functions */
movl $0x4000, %esp
call EXT_C(grub_stop_floppy)
/* final setup for linux boot */
call prot_to_real
.code16
cli
movw %bx, %ss
movw $GRUB_LINUX_SETUP_STACK, %sp
movw %bx, %ds
movw %bx, %es
movw %bx, %fs
movw %bx, %gs
/* ljmp */
.byte 0xea
.word 0
linux_setup_seg:
.word 0
.code32
/*
* This starts the multiboot kernel.
*/
FUNCTION(grub_multiboot_real_boot)
/* Push the entry address on the stack. */
pushl %eax
/* Move the address of the multiboot information structure to ebx. */
movl %edx,%ebx
/* Unload all modules and stop the floppy driver. */
call EXT_C(grub_dl_unload_all)
call EXT_C(grub_stop_floppy)
/* Interrupts should be disabled. */
cli
/* Move the magic value into eax and jump to the kernel. */
movl $GRUB_MB_MAGIC2,%eax
popl %ecx
jmp *%ecx
/*
* int grub_biosdisk_rw_int13_extensions (int ah, int drive, void *dap)
*
* Call IBM/MS INT13 Extensions (int 13 %ah=AH) for DRIVE. DAP
* is passed for disk address packet. If an error occurs, return
* non-zero, otherwise zero.
*/
FUNCTION(grub_biosdisk_rw_int13_extensions)
pushl %ebp
pushl %esi
/* compute the address of disk_address_packet */
movw %cx, %si
xorw %cx, %cx
shrl $4, %ecx /* save the segment to cx */
/* ah */
movb %al, %dh
/* enter real mode */
call prot_to_real
.code16
movb %dh, %ah
movw %cx, %ds
int $0x13 /* do the operation */
movb %ah, %dl /* save return value */
/* clear the data segment */
xorw %ax, %ax
movw %ax, %ds
/* back to protected mode */
DATA32 call real_to_prot
.code32
movb %dl, %al /* return value in %eax */
popl %esi
popl %ebp
ret
/*
* int grub_biosdisk_rw_standard (int ah, int drive, int coff, int hoff,
* int soff, int nsec, int segment)
*
* Call standard and old INT13 (int 13 %ah=AH) for DRIVE. Read/write
* NSEC sectors from COFF/HOFF/SOFF into SEGMENT. If an error occurs,
* return non-zero, otherwise zero.
*/
FUNCTION(grub_biosdisk_rw_standard)
pushl %ebp
movl %esp, %ebp
pushl %ebx
pushl %edi
pushl %esi
/* set up CHS information */
/* set %ch to low eight bits of cylinder */
xchgb %cl, %ch
/* set bits 6-7 of %cl to high two bits of cylinder */
shlb $6, %cl
/* set bits 0-5 of %cl to sector */
addb 0xc(%ebp), %cl
/* set %dh to head */
movb 0x8(%ebp), %dh
/* set %ah to AH */
movb %al, %ah
/* set %al to NSEC */
movb 0x10(%ebp), %al
/* save %ax in %di */
movw %ax, %di
/* save SEGMENT in %bx */
movw 0x14(%ebp), %bx
/* enter real mode */
call prot_to_real
.code16
movw %bx, %es
xorw %bx, %bx
movw $3, %si /* attempt at least three times */
1:
movw %di, %ax
int $0x13 /* do the operation */
jnc 2f /* check if successful */
movb %ah, %bl /* save return value */
/* if fail, reset the disk system */
xorw %ax, %ax
int $0x13
decw %si
cmpw $0, %si
je 2f
xorb %bl, %bl
jmp 1b /* retry */
2:
/* back to protected mode */
DATA32 call real_to_prot
.code32
movb %bl, %al /* return value in %eax */
popl %esi
popl %edi
popl %ebx
popl %ebp
ret $(4 * 4)
/*
* int grub_biosdisk_check_int13_extensions (int drive)
*
* Check if LBA is supported for DRIVE. If it is supported, then return
* the major version of extensions, otherwise zero.
*/
FUNCTION(grub_biosdisk_check_int13_extensions)
pushl %ebp
pushl %ebx
/* drive */
movb %al, %dl
/* enter real mode */
call prot_to_real
.code16
movb $0x41, %ah
movw $0x55aa, %bx
int $0x13 /* do the operation */
/* check the result */
jc 1f
cmpw $0xaa55, %bx
jne 1f
movb %ah, %bl /* save the major version into %bl */
/* check if AH=0x42 is supported */
andw $1, %cx
jnz 2f
1:
xorb %bl, %bl
2:
/* back to protected mode */
DATA32 call real_to_prot
.code32
movb %bl, %al /* return value in %eax */
popl %ebx
popl %ebp
ret
/*
* int grub_biosdisk_get_diskinfo_int13_extensions (int drive, void *drp)
*
* Return the geometry of DRIVE in a drive parameters, DRP. If an error
* occurs, then return non-zero, otherwise zero.
*/
FUNCTION(grub_biosdisk_get_diskinfo_int13_extensions)
pushl %ebp
pushl %ebx
pushl %esi
/* compute the address of drive parameters */
movw %dx, %si
xorw %dx, %dx
shrl $4, %edx
movw %dx, %bx /* save the segment into %bx */
/* drive */
movb %al, %dl
/* enter real mode */
call prot_to_real
.code16
movb $0x48, %ah
movw %bx, %ds
int $0x13 /* do the operation */
movb %ah, %bl /* save return value in %bl */
/* clear the data segment */
xorw %ax, %ax
movw %ax, %ds
/* back to protected mode */
DATA32 call real_to_prot
.code32
movb %bl, %al /* return value in %eax */
popl %esi
popl %ebx
popl %ebp
ret
/*
* int grub_biosdisk_get_diskinfo_standard (int drive,
* unsigned long *cylinders,
* unsigned long *heads,
* unsigned long *sectors)
*
* Return the geometry of DRIVE in CYLINDERS, HEADS and SECTORS. If an
* error occurs, then return non-zero, otherwise zero.
*/
FUNCTION(grub_biosdisk_get_diskinfo_standard)
pushl %ebp
pushl %ebx
pushl %edi
/* push CYLINDERS */
pushl %edx
/* push HEADS */
pushl %ecx
/* SECTORS is on the stack */
/* drive */
movb %al, %dl
/* enter real mode */
call prot_to_real
.code16
movb $0x8, %ah
int $0x13 /* do the operation */
/* check if successful */
testb %ah, %ah
jnz 1f
/* bogus BIOSes may not return an error number */
testb $0x3f, %cl /* 0 sectors means no disk */
jnz 1f /* if non-zero, then succeed */
/* XXX 0x60 is one of the unused error numbers */
movb $0x60, %ah
1:
movb %ah, %bl /* save return value in %bl */
/* back to protected mode */
DATA32 call real_to_prot
.code32
/* pop HEADS */
popl %edi
movb %dh, %al
incl %eax /* the number of heads is counted from zero */
movl %eax, (%edi)
/* pop CYLINDERS */
popl %edi
movb %ch, %al
movb %cl, %ah
shrb $6, %ah /* the number of cylinders is counted from zero */
incl %eax
movl %eax, (%edi)
/* SECTORS */
movl 0x10(%esp), %edi
andb $0x3f, %cl
movzbl %cl, %eax
movl %eax, (%edi)
xorl %eax, %eax
movb %bl, %al /* return value in %eax */
popl %edi
popl %ebx
popl %ebp
ret $4
/*
* int grub_biosdisk_get_num_floppies (void)
*/
FUNCTION(grub_biosdisk_get_num_floppies)
pushl %ebp
xorl %edx, %edx
call prot_to_real
.code16
/* reset the disk system first */
int $0x13
1:
stc
/* call GET DISK TYPE */
movb $0x15, %ah
int $0x13
jc 2f
/* check if this drive exists */
testb $0x3, %ah
jz 2f
incb %dl
cmpb $2, %dl
jne 1b
2:
DATA32 call real_to_prot
.code32
movl %edx, %eax
popl %ebp
ret
/*
*
* grub_get_memsize(i) : return the memory size in KB. i == 0 for conventional
* memory, i == 1 for extended memory
* BIOS call "INT 12H" to get conventional memory size
* BIOS call "INT 15H, AH=88H" to get extended memory size
* Both have the return value in AX.
*
*/
FUNCTION(grub_get_memsize)
pushl %ebp
movl %eax, %edx
call prot_to_real /* enter real mode */
.code16
testl %edx, %edx
jnz xext
int $0x12
jmp xdone
xext:
movb $0x88, %ah
int $0x15
xdone:
movw %ax, %dx
DATA32 call real_to_prot
.code32
movw %dx, %ax
popl %ebp
ret
/*
*
* grub_get_eisa_mmap() : return packed EISA memory map, lower 16 bits is
* memory between 1M and 16M in 1K parts, upper 16 bits is
* memory above 16M in 64K parts. If error, return zero.
* BIOS call "INT 15H, AH=E801H" to get EISA memory map,
* AX = memory between 1M and 16M in 1K parts.
* BX = memory above 16M in 64K parts.
*
*/
FUNCTION(grub_get_eisa_mmap)
pushl %ebp
pushl %ebx
call prot_to_real /* enter real mode */
.code16
movw $0xe801, %ax
int $0x15
shll $16, %ebx
movw %ax, %bx
DATA32 call real_to_prot
.code32
cmpb $0x86, %bh
je xnoteisa
movl %ebx, %eax
xnoteisa:
popl %ebx
popl %ebp
ret
/*
*
* grub_get_mmap_entry(addr, cont) : address and old continuation value (zero to
* start), for the Query System Address Map BIOS call.
*
* Sets the first 4-byte int value of "addr" to the size returned by
* the call. If the call fails, sets it to zero.
*
* Returns: new (non-zero) continuation value, 0 if done.
*/
FUNCTION(grub_get_mmap_entry)
pushl %ebp
pushl %ebx
pushl %edi
pushl %esi
/* push ADDR */
pushl %eax
/* place address (+4) in ES:DI */
addl $4, %eax
movl %eax, %edi
andl $0xf, %edi
shrl $4, %eax
movl %eax, %esi
/* set continuation value */
movl %edx, %ebx
/* set default maximum buffer size */
movl $0x14, %ecx
/* set EDX to 'SMAP' */
movl $0x534d4150, %edx
call prot_to_real /* enter real mode */
.code16
movw %si, %es
movl $0xe820, %eax
int $0x15
DATA32 jc xnosmap
cmpl $0x534d4150, %eax
jne xnosmap
cmpl $0x14, %ecx
jl xnosmap
cmpl $0x400, %ecx
jg xnosmap
jmp xsmap
xnosmap:
xorl %ecx, %ecx
xsmap:
DATA32 call real_to_prot
.code32
/* write length of buffer (zero if error) into ADDR */
popl %eax
movl %ecx, (%eax)
/* set return value to continuation */
movl %ebx, %eax
popl %esi
popl %edi
popl %ebx
popl %ebp
ret
/*
* void grub_console_real_putchar (int c)
*
* Put the character C on the console. Because GRUB wants to write a
* character with an attribute, this implementation is a bit tricky.
* If C is a control character (CR, LF, BEL, BS), use INT 10, AH = 0Eh
* (TELETYPE OUTPUT). Otherwise, save the original position, put a space,
* save the current position, restore the original position, write the
* character and the attribute, and restore the current position.
*
* The reason why this is so complicated is that there is no easy way to
* get the height of the screen, and the TELETYPE OUPUT BIOS call doesn't
* support setting a background attribute.
*/
FUNCTION(grub_console_real_putchar)
movl %eax, %edx
pusha
movb EXT_C(grub_console_cur_color), %bl
call prot_to_real
.code16
movb %dl, %al
xorb %bh, %bh
/* use teletype output if control character */
cmpb $0x7, %al
je 1f
cmpb $0x8, %al
je 1f
cmpb $0xa, %al
je 1f
cmpb $0xd, %al
je 1f
/* save the character and the attribute on the stack */
pushw %ax
pushw %bx
/* get the current position */
movb $0x3, %ah
int $0x10
/* check the column with the width */
cmpb $79, %dl
jl 2f
/* print CR and LF, if next write will exceed the width */
movw $0x0e0d, %ax
int $0x10
movb $0x0a, %al
int $0x10
/* get the current position */
movb $0x3, %ah
int $0x10
2:
/* restore the character and the attribute */
popw %bx
popw %ax
/* write the character with the attribute */
movb $0x9, %ah
movw $1, %cx
int $0x10
/* move the cursor forward */
incb %dl
movb $0x2, %ah
int $0x10
jmp 3f
1: movw $1, %bx
movb $0xe, %ah
int $0x10
3: DATA32 call real_to_prot
.code32
popa
ret
/*
* int grub_console_getkey (void)
* BIOS call "INT 16H Function 00H" to read character from keyboard
* Call with %ah = 0x0
* Return: %ah = keyboard scan code
* %al = ASCII character
*/
/* this table is used in translate_keycode below */
translation_table:
.word GRUB_CONSOLE_KEY_LEFT, 2
.word GRUB_CONSOLE_KEY_RIGHT, 6
.word GRUB_CONSOLE_KEY_UP, 16
.word GRUB_CONSOLE_KEY_DOWN, 14
.word GRUB_CONSOLE_KEY_HOME, 1
.word GRUB_CONSOLE_KEY_END, 5
.word GRUB_CONSOLE_KEY_DC, 4
.word GRUB_CONSOLE_KEY_BACKSPACE, 8
.word GRUB_CONSOLE_KEY_PPAGE, 7
.word GRUB_CONSOLE_KEY_NPAGE, 3
.word 0
/*
* translate_keycode translates the key code %dx to an ascii code.
*/
.code16
translate_keycode:
pushw %bx
pushw %si
movw $ABS(translation_table), %si
1: lodsw
/* check if this is the end */
testw %ax, %ax
jz 2f
/* load the ascii code into %ax */
movw %ax, %bx
lodsw
/* check if this matches the key code */
cmpw %bx, %dx
jne 1b
/* translate %dx, if successful */
movw %ax, %dx
2: popw %si
popw %bx
ret
.code32
FUNCTION(grub_console_getkey)
pushl %ebp
call prot_to_real
.code16
int $0x16
movw %ax, %dx /* real_to_prot uses %eax */
call translate_keycode
DATA32 call real_to_prot
.code32
movw %dx, %ax
popl %ebp
ret
/*
* int grub_console_checkkey (void)
* if there is a character pending, return it; otherwise return -1
* BIOS call "INT 16H Function 01H" to check whether a character is pending
* Call with %ah = 0x1
* Return:
* If key waiting to be input:
* %ah = keyboard scan code
* %al = ASCII character
* Zero flag = clear
* else
* Zero flag = set
*/
FUNCTION(grub_console_checkkey)
pushl %ebp
xorl %edx, %edx
call prot_to_real /* enter real mode */
.code16
movb $0x1, %ah
int $0x16
jz notpending
movw %ax, %dx
DATA32 jmp pending
notpending:
decl %edx
pending:
DATA32 call real_to_prot
.code32
movl %edx, %eax
popl %ebp
ret
/*
* grub_uint16_t grub_console_getxy (void)
* BIOS call "INT 10H Function 03h" to get cursor position
* Call with %ah = 0x03
* %bh = page
* Returns %ch = starting scan line
* %cl = ending scan line
* %dh = row (0 is top)
* %dl = column (0 is left)
*/
FUNCTION(grub_console_getxy)
pushl %ebp
pushl %ebx /* save EBX */
call prot_to_real
.code16
xorb %bh, %bh /* set page to 0 */
movb $0x3, %ah
int $0x10 /* get cursor position */
DATA32 call real_to_prot
.code32
movb %dl, %ah
movb %dh, %al
popl %ebx
popl %ebp
ret
/*
* void grub_console_gotoxy(grub_uint8_t x, grub_uint8_t y)
* BIOS call "INT 10H Function 02h" to set cursor position
* Call with %ah = 0x02
* %bh = page
* %dh = row (0 is top)
* %dl = column (0 is left)
*/
FUNCTION(grub_console_gotoxy)
pushl %ebp
pushl %ebx /* save EBX */
movb %dl, %dh /* %dh = y */
movb %al, %dl /* %dl = x */
call prot_to_real
.code16
xorb %bh, %bh /* set page to 0 */
movb $0x2, %ah
int $0x10 /* set cursor position */
DATA32 call real_to_prot
.code32
popl %ebx
popl %ebp
ret
/*
* void grub_console_cls (void)
* BIOS call "INT 10H Function 09h" to write character and attribute
* Call with %ah = 0x09
* %al = (character)
* %bh = (page number)
* %bl = (attribute)
* %cx = (number of times)
*/
FUNCTION(grub_console_cls)
pushl %ebp
pushl %ebx /* save EBX */
call prot_to_real
.code16
/* move the cursor to the beginning */
movb $0x02, %ah
xorb %bh, %bh
xorw %dx, %dx
int $0x10
/* write spaces to the entire screen */
movw $0x0920, %ax
movw $0x07, %bx
movw $(80 * 25), %cx
int $0x10
/* move back the cursor */
movb $0x02, %ah
int $0x10
DATA32 call real_to_prot
.code32
popl %ebx
popl %ebp
ret
/*
* void grub_console_setcursor (int on)
* BIOS call "INT 10H Function 01h" to set cursor type
* Call with %ah = 0x01
* %ch = cursor starting scanline
* %cl = cursor ending scanline
*/
console_cursor_state:
.byte 1
console_cursor_shape:
.word 0
FUNCTION(grub_console_setcursor)
pushl %ebp
pushl %ebx
/* push ON */
pushl %eax
/* check if the standard cursor shape has already been saved */
movw console_cursor_shape, %ax
testw %ax, %ax
jne 1f
call prot_to_real
.code16
movb $0x03, %ah
xorb %bh, %bh
int $0x10
DATA32 call real_to_prot
.code32
movw %cx, console_cursor_shape
1:
/* set %cx to the designated cursor shape */
movw $0x2000, %cx
popl %eax
testl %eax, %eax
jz 2f
movw console_cursor_shape, %cx
2:
call prot_to_real
.code16
movb $0x1, %ah
int $0x10
DATA32 call real_to_prot
.code32
popl %ebx
popl %ebp
ret
/*
* grub_getrtsecs()
* if a seconds value can be read, read it and return it (BCD),
* otherwise return 0xFF
* BIOS call "INT 1AH Function 02H" to check whether a character is pending
* Call with %ah = 0x2
* Return:
* If RT Clock can give correct values
* %ch = hour (BCD)
* %cl = minutes (BCD)
* %dh = seconds (BCD)
* %dl = daylight savings time (00h std, 01h daylight)
* Carry flag = clear
* else
* Carry flag = set
* (this indicates that the clock is updating, or
* that it isn't running)
*/
FUNCTION(grub_getrtsecs)
pushl %ebp
call prot_to_real /* enter real mode */
.code16
clc
movb $0x2, %ah
int $0x1a
DATA32 jnc gottime
movb $0xff, %dh
gottime:
DATA32 call real_to_prot
.code32
movb %dh, %al
popl %ebp
ret
/*
* grub_get_rtc()
* return the real time in ticks, of which there are about
* 18-20 per second
*/
FUNCTION(grub_get_rtc)
pushl %ebp
call prot_to_real /* enter real mode */
.code16
/* %ax is already zero */
int $0x1a
DATA32 call real_to_prot
.code32
movl %ecx, %eax
shll $16, %eax
movw %dx, %ax
popl %ebp
ret
/*
* unsigned char grub_vga_set_mode (unsigned char mode)
*/
FUNCTION(grub_vga_set_mode)
pushl %ebp
pushl %ebx
movl %eax, %ecx
call prot_to_real
.code16
/* get current mode */
xorw %bx, %bx
movb $0x0f, %ah
int $0x10
movb %al, %dl
/* set the new mode */
movb %cl, %al
xorb %ah, %ah
int $0x10
DATA32 call real_to_prot
.code32
movb %dl, %al
popl %ebx
popl %ebp
ret
/*
* unsigned char *grub_vga_get_font (void)
*/
FUNCTION(grub_vga_get_font)
pushl %ebp
pushl %ebx
call prot_to_real
.code16
movw $0x1130, %ax
movb $0x06, %bh
int $0x10
movw %es, %bx
movw %bp, %dx
DATA32 call real_to_prot
.code32
movzwl %bx, %ecx
shll $4, %ecx
movw %dx, %ax
addl %ecx, %eax
popl %ebx
popl %ebp
ret
Reference in a new issue View git blame Copy permalink