vbatts/grub
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
grub/grub-core/bus/usb/ehci.c
Vladimir Serbinenko 058df7b5a9 ehci: Split core code from PCI part. 
On ARM often EHCI is present without PCI and just declared in device
tree. So splitcore from PCI part.
2017-05-08 22:10:26 +02:00

1839 lines
61 KiB
C
Raw Blame History

/* ehci.c - EHCI Support. */
/*
* GRUB -- GRand Unified Bootloader
* Copyright (C) 2011 Free Software Foundation, Inc.
*
* GRUB is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* GRUB is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with GRUB. If not, see <http://www.gnu.org/licenses/>.
*/
#include <grub/dl.h>
#include <grub/mm.h>
#include <grub/usb.h>
#include <grub/usbtrans.h>
#include <grub/misc.h>
#include <grub/time.h>
#include <grub/loader.h>
#include <grub/disk.h>
#include <grub/dma.h>
#include <grub/cache.h>
GRUB_MOD_LICENSE ("GPLv3+");
/* This simple GRUB implementation of EHCI driver:
* - assumes no IRQ
* - is not supporting isochronous transfers (iTD, siTD)
* - is not supporting interrupt transfers
*/
/* Capability registers offsets */
enum
{
GRUB_EHCI_EHCC_CAPLEN = 0x00, /* byte */
GRUB_EHCI_EHCC_VERSION = 0x02, /* word */
GRUB_EHCI_EHCC_SPARAMS = 0x04, /* dword */
GRUB_EHCI_EHCC_CPARAMS = 0x08, /* dword */
GRUB_EHCI_EHCC_PROUTE = 0x0c, /* 60 bits */
};
#define GRUB_EHCI_EECP_MASK (0xff << 8)
#define GRUB_EHCI_EECP_SHIFT 8
#define GRUB_EHCI_POINTER_MASK (~0x1f)
/* Capability register SPARAMS bits */
enum
{
GRUB_EHCI_SPARAMS_N_PORTS = (0xf << 0),
GRUB_EHCI_SPARAMS_PPC = (1 << 4), /* Power port control */
GRUB_EHCI_SPARAMS_PRR = (1 << 7), /* Port routing rules */
GRUB_EHCI_SPARAMS_N_PCC = (0xf << 8), /* No of ports per comp. */
GRUB_EHCI_SPARAMS_NCC = (0xf << 12), /* No of com. controllers */
GRUB_EHCI_SPARAMS_P_IND = (1 << 16), /* Port indicators present */
GRUB_EHCI_SPARAMS_DEBUG_P = (0xf << 20) /* Debug port */
};
#define GRUB_EHCI_MAX_N_PORTS 15 /* Max. number of ports */
/* Capability register CPARAMS bits */
enum
{
GRUB_EHCI_CPARAMS_64BIT = (1 << 0),
GRUB_EHCI_CPARAMS_PROG_FRAMELIST = (1 << 1),
GRUB_EHCI_CPARAMS_PARK_CAP = (1 << 2)
};
#define GRUB_EHCI_N_FRAMELIST 1024
#define GRUB_EHCI_N_QH 256
#define GRUB_EHCI_N_TD 640
#define GRUB_EHCI_QH_EMPTY 1
/* Operational registers offsets */
enum
{
GRUB_EHCI_COMMAND = 0x00,
GRUB_EHCI_STATUS = 0x04,
GRUB_EHCI_INTERRUPT = 0x08,
GRUB_EHCI_FRAME_INDEX = 0x0c,
GRUB_EHCI_64BIT_SEL = 0x10,
GRUB_EHCI_FL_BASE = 0x14,
GRUB_EHCI_CUR_AL_ADDR = 0x18,
GRUB_EHCI_CONFIG_FLAG = 0x40,
GRUB_EHCI_PORT_STAT_CMD = 0x44
};
/* Operational register COMMAND bits */
enum
{
GRUB_EHCI_CMD_RUNSTOP = (1 << 0),
GRUB_EHCI_CMD_HC_RESET = (1 << 1),
GRUB_EHCI_CMD_FL_SIZE = (3 << 2),
GRUB_EHCI_CMD_PS_ENABL = (1 << 4),
GRUB_EHCI_CMD_AS_ENABL = (1 << 5),
GRUB_EHCI_CMD_AS_ADV_D = (1 << 6),
GRUB_EHCI_CMD_L_HC_RES = (1 << 7),
GRUB_EHCI_CMD_AS_PARKM = (3 << 8),
GRUB_EHCI_CMD_AS_PARKE = (1 << 11),
GRUB_EHCI_CMD_INT_THRS = (0xff << 16)
};
/* Operational register STATUS bits */
enum
{
GRUB_EHCI_ST_INTERRUPT = (1 << 0),
GRUB_EHCI_ST_ERROR_INT = (1 << 1),
GRUB_EHCI_ST_PORT_CHG = (1 << 2),
GRUB_EHCI_ST_FL_ROLLOVR = (1 << 3),
GRUB_EHCI_ST_HS_ERROR = (1 << 4),
GRUB_EHCI_ST_AS_ADVANCE = (1 << 5),
GRUB_EHCI_ST_HC_HALTED = (1 << 12),
GRUB_EHCI_ST_RECLAM = (1 << 13),
GRUB_EHCI_ST_PS_STATUS = (1 << 14),
GRUB_EHCI_ST_AS_STATUS = (1 << 15)
};
/* Operational register PORT_STAT_CMD bits */
enum
{
GRUB_EHCI_PORT_CONNECT = (1 << 0),
GRUB_EHCI_PORT_CONNECT_CH = (1 << 1),
GRUB_EHCI_PORT_ENABLED = (1 << 2),
GRUB_EHCI_PORT_ENABLED_CH = (1 << 3),
GRUB_EHCI_PORT_OVERCUR = (1 << 4),
GRUB_EHCI_PORT_OVERCUR_CH = (1 << 5),
GRUB_EHCI_PORT_RESUME = (1 << 6),
GRUB_EHCI_PORT_SUSPEND = (1 << 7),
GRUB_EHCI_PORT_RESET = (1 << 8),
GRUB_EHCI_PORT_LINE_STAT = (3 << 10),
GRUB_EHCI_PORT_POWER = (1 << 12),
GRUB_EHCI_PORT_OWNER = (1 << 13),
GRUB_EHCI_PORT_INDICATOR = (3 << 14),
GRUB_EHCI_PORT_TEST = (0xf << 16),
GRUB_EHCI_PORT_WON_CONN_E = (1 << 20),
GRUB_EHCI_PORT_WON_DISC_E = (1 << 21),
GRUB_EHCI_PORT_WON_OVER_E = (1 << 22),
GRUB_EHCI_PORT_LINE_SE0 = (0 << 10),
GRUB_EHCI_PORT_LINE_K = (1 << 10),
GRUB_EHCI_PORT_LINE_J = (2 << 10),
GRUB_EHCI_PORT_LINE_UNDEF = (3 << 10),
GRUB_EHCI_PORT_LINE_LOWSP = GRUB_EHCI_PORT_LINE_K, /* K state means low speed */
GRUB_EHCI_PORT_WMASK = ~(GRUB_EHCI_PORT_CONNECT_CH
| GRUB_EHCI_PORT_ENABLED_CH
| GRUB_EHCI_PORT_OVERCUR_CH)
};
/* Operational register CONFIGFLAGS bits */
enum
{
GRUB_EHCI_CF_EHCI_OWNER = (1 << 0)
};
/* Queue Head & Transfer Descriptor constants */
#define GRUB_EHCI_HPTR_OFF 5 /* Horiz. pointer bit offset */
enum
{
GRUB_EHCI_HPTR_TYPE_MASK = (3 << 1),
GRUB_EHCI_HPTR_TYPE_ITD = (0 << 1),
GRUB_EHCI_HPTR_TYPE_QH = (1 << 1),
GRUB_EHCI_HPTR_TYPE_SITD = (2 << 1),
GRUB_EHCI_HPTR_TYPE_FSTN = (3 << 1)
};
enum
{
GRUB_EHCI_C = (1 << 27),
GRUB_EHCI_MAXPLEN_MASK = (0x7ff << 16),
GRUB_EHCI_H = (1 << 15),
GRUB_EHCI_DTC = (1 << 14),
GRUB_EHCI_SPEED_MASK = (3 << 12),
GRUB_EHCI_SPEED_FULL = (0 << 12),
GRUB_EHCI_SPEED_LOW = (1 << 12),
GRUB_EHCI_SPEED_HIGH = (2 << 12),
GRUB_EHCI_SPEED_RESERVED = (3 << 12),
GRUB_EHCI_EP_NUM_MASK = (0xf << 8),
GRUB_EHCI_DEVADDR_MASK = 0x7f,
GRUB_EHCI_TARGET_MASK = (GRUB_EHCI_EP_NUM_MASK | GRUB_EHCI_DEVADDR_MASK)
};
enum
{
GRUB_EHCI_MAXPLEN_OFF = 16,
GRUB_EHCI_SPEED_OFF = 12,
GRUB_EHCI_EP_NUM_OFF = 8
};
enum
{
GRUB_EHCI_MULT_MASK = (3 << 30),
GRUB_EHCI_MULT_RESERVED = (0 << 30),
GRUB_EHCI_MULT_ONE = (1 << 30),
GRUB_EHCI_MULT_TWO = (2 << 30),
GRUB_EHCI_MULT_THREE = (3 << 30),
GRUB_EHCI_DEVPORT_MASK = (0x7f << 23),
GRUB_EHCI_HUBADDR_MASK = (0x7f << 16),
GRUB_EHCI_CMASK_MASK = (0xff << 8),
GRUB_EHCI_SMASK_MASK = (0xff << 0),
};
enum
{
GRUB_EHCI_MULT_OFF = 30,
GRUB_EHCI_DEVPORT_OFF = 23,
GRUB_EHCI_HUBADDR_OFF = 16,
GRUB_EHCI_CMASK_OFF = 8,
GRUB_EHCI_SMASK_OFF = 0,
};
#define GRUB_EHCI_TERMINATE (1<<0)
#define GRUB_EHCI_TOGGLE (1<<31)
enum
{
GRUB_EHCI_TOTAL_MASK = (0x7fff << 16),
GRUB_EHCI_CERR_MASK = (3 << 10),
GRUB_EHCI_CERR_0 = (0 << 10),
GRUB_EHCI_CERR_1 = (1 << 10),
GRUB_EHCI_CERR_2 = (2 << 10),
GRUB_EHCI_CERR_3 = (3 << 10),
GRUB_EHCI_PIDCODE_OUT = (0 << 8),
GRUB_EHCI_PIDCODE_IN = (1 << 8),
GRUB_EHCI_PIDCODE_SETUP = (2 << 8),
GRUB_EHCI_STATUS_MASK = 0xff,
GRUB_EHCI_STATUS_ACTIVE = (1 << 7),
GRUB_EHCI_STATUS_HALTED = (1 << 6),
GRUB_EHCI_STATUS_BUFERR = (1 << 5),
GRUB_EHCI_STATUS_BABBLE = (1 << 4),
GRUB_EHCI_STATUS_TRANERR = (1 << 3),
GRUB_EHCI_STATUS_MISSDMF = (1 << 2),
GRUB_EHCI_STATUS_SPLITST = (1 << 1),
GRUB_EHCI_STATUS_PINGERR = (1 << 0)
};
enum
{
GRUB_EHCI_TOTAL_OFF = 16,
GRUB_EHCI_CERR_OFF = 10
};
#define GRUB_EHCI_BUFPTR_MASK (0xfffff<<12)
#define GRUB_EHCI_QHTDPTR_MASK 0xffffffe0
#define GRUB_EHCI_TD_BUF_PAGES 5
#define GRUB_EHCI_BUFPAGELEN 0x1000
#define GRUB_EHCI_MAXBUFLEN 0x5000
struct grub_ehci_td;
struct grub_ehci_qh;
typedef volatile struct grub_ehci_td *grub_ehci_td_t;
typedef volatile struct grub_ehci_qh *grub_ehci_qh_t;
/* EHCI Isochronous Transfer Descriptor */
/* Currently not supported */
/* EHCI Split Transaction Isochronous Transfer Descriptor */
/* Currently not supported */
/* EHCI Queue Element Transfer Descriptor (qTD) */
/* Align to 32-byte boundaries */
struct grub_ehci_td
{
/* EHCI HW part */
grub_uint32_t next_td; /* Pointer to next qTD */
grub_uint32_t alt_next_td; /* Pointer to alternate next qTD */
grub_uint32_t token; /* Toggle, Len, Interrupt, Page, Error, PID, Status */
grub_uint32_t buffer_page[GRUB_EHCI_TD_BUF_PAGES]; /* Buffer pointer (+ cur. offset in page 0 */
/* 64-bits part */
grub_uint32_t buffer_page_high[GRUB_EHCI_TD_BUF_PAGES];
/* EHCI driver part */
grub_uint32_t link_td; /* pointer to next free/chained TD */
grub_uint32_t size;
grub_uint32_t pad[1]; /* padding to some multiple of 32 bytes */
};
/* EHCI Queue Head */
/* Align to 32-byte boundaries */
/* QH allocation is made in the similar/same way as in OHCI driver,
* because unlninking QH from the Asynchronous list is not so
* trivial as on UHCI (at least it is time consuming) */
struct grub_ehci_qh
{
/* EHCI HW part */
grub_uint32_t qh_hptr; /* Horiz. pointer & Terminate */
grub_uint32_t ep_char; /* EP characteristics */
grub_uint32_t ep_cap; /* EP capabilities */
grub_uint32_t td_current; /* current TD link pointer */
struct grub_ehci_td td_overlay; /* TD overlay area = 64 bytes */
/* EHCI driver part */
grub_uint32_t pad[4]; /* padding to some multiple of 32 bytes */
};
/* EHCI Periodic Frame Span Traversal Node */
/* Currently not supported */
struct grub_ehci
{
volatile grub_uint32_t *iobase_ehcc; /* Capability registers */
volatile grub_uint32_t *iobase; /* Operational registers */
struct grub_pci_dma_chunk *framelist_chunk; /* Currently not used */
volatile grub_uint32_t *framelist_virt;
grub_uint32_t framelist_phys;
struct grub_pci_dma_chunk *qh_chunk; /* GRUB_EHCI_N_QH Queue Heads */
grub_ehci_qh_t qh_virt;
grub_uint32_t qh_phys;
struct grub_pci_dma_chunk *td_chunk; /* GRUB_EHCI_N_TD Transfer Descriptors */
grub_ehci_td_t td_virt;
grub_uint32_t td_phys;
grub_ehci_td_t tdfree_virt; /* Free Transfer Descriptors */
int flag64;
grub_uint32_t reset; /* bits 1-15 are flags if port was reset from connected time or not */
struct grub_ehci *next;
};
static struct grub_ehci *ehci;
static void
sync_all_caches (struct grub_ehci *e)
{
if (!e)
return;
if (e->td_virt)
grub_arch_sync_dma_caches (e->td_virt, sizeof (struct grub_ehci_td) *
GRUB_EHCI_N_TD);
if (e->qh_virt)
grub_arch_sync_dma_caches (e->qh_virt, sizeof (struct grub_ehci_qh) *
GRUB_EHCI_N_QH);
if (e->framelist_virt)
grub_arch_sync_dma_caches (e->framelist_virt, 4096);
}
/* EHCC registers access functions */
static inline grub_uint32_t
grub_ehci_ehcc_read32 (struct grub_ehci *e, grub_uint32_t addr)
{
return
grub_le_to_cpu32 (*((volatile grub_uint32_t *) e->iobase_ehcc +
(addr / sizeof (grub_uint32_t))));
}
static inline grub_uint16_t
grub_ehci_ehcc_read16 (struct grub_ehci *e, grub_uint32_t addr)
{
return
grub_le_to_cpu16 (*((volatile grub_uint16_t *) e->iobase_ehcc +
(addr / sizeof (grub_uint16_t))));
}
static inline grub_uint8_t
grub_ehci_ehcc_read8 (struct grub_ehci *e, grub_uint32_t addr)
{
return *((volatile grub_uint8_t *) e->iobase_ehcc + addr);
}
/* Operational registers access functions */
static inline grub_uint32_t
grub_ehci_oper_read32 (struct grub_ehci *e, grub_uint32_t addr)
{
return
grub_le_to_cpu32 (*
((volatile grub_uint32_t *) e->iobase +
(addr / sizeof (grub_uint32_t))));
}
static inline void
grub_ehci_oper_write32 (struct grub_ehci *e, grub_uint32_t addr,
grub_uint32_t value)
{
*((volatile grub_uint32_t *) e->iobase + (addr / sizeof (grub_uint32_t))) =
grub_cpu_to_le32 (value);
}
static inline grub_uint32_t
grub_ehci_port_read (struct grub_ehci *e, grub_uint32_t port)
{
return grub_ehci_oper_read32 (e, GRUB_EHCI_PORT_STAT_CMD + port * 4);
}
static inline void
grub_ehci_port_resbits (struct grub_ehci *e, grub_uint32_t port,
grub_uint32_t bits)
{
grub_ehci_oper_write32 (e, GRUB_EHCI_PORT_STAT_CMD + port * 4,
grub_ehci_port_read (e,
port) & GRUB_EHCI_PORT_WMASK &
~(bits));
grub_ehci_port_read (e, port);
}
static inline void
grub_ehci_port_setbits (struct grub_ehci *e, grub_uint32_t port,
grub_uint32_t bits)
{
grub_ehci_oper_write32 (e, GRUB_EHCI_PORT_STAT_CMD + port * 4,
(grub_ehci_port_read (e, port) &
GRUB_EHCI_PORT_WMASK) | bits);
grub_ehci_port_read (e, port);
}
/* Halt if EHCI HC not halted */
static grub_usb_err_t
grub_ehci_halt (struct grub_ehci *e)
{
grub_uint64_t maxtime;
if ((grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS) & GRUB_EHCI_ST_HC_HALTED) == 0) /* EHCI is not halted */
{
/* Halt EHCI */
grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND,
~GRUB_EHCI_CMD_RUNSTOP
& grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND));
/* Ensure command is written */
grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND);
maxtime = grub_get_time_ms () + 1000; /* Fix: Should be 2ms ! */
while (((grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS)
& GRUB_EHCI_ST_HC_HALTED) == 0)
&& (grub_get_time_ms () < maxtime));
if ((grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS)
& GRUB_EHCI_ST_HC_HALTED) == 0)
return GRUB_USB_ERR_TIMEOUT;
}
return GRUB_USB_ERR_NONE;
}
/* EHCI HC reset */
static grub_usb_err_t
grub_ehci_reset (struct grub_ehci *e)
{
grub_uint64_t maxtime;
sync_all_caches (e);
grub_dprintf ("ehci", "reset\n");
grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND,
GRUB_EHCI_CMD_HC_RESET);
/* Ensure command is written */
grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND);
/* XXX: How long time could take reset of HC ? */
maxtime = grub_get_time_ms () + 1000;
while (((grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND)
& GRUB_EHCI_CMD_HC_RESET) != 0)
&& (grub_get_time_ms () < maxtime));
if ((grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND)
& GRUB_EHCI_CMD_HC_RESET) != 0)
return GRUB_USB_ERR_TIMEOUT;
return GRUB_USB_ERR_NONE;
}
/* PCI iteration function... */
void
grub_ehci_init_device (volatile void *regs)
{
struct grub_ehci *e;
grub_uint32_t fp;
int i;
grub_uint32_t n_ports;
grub_uint8_t caplen;
/* Allocate memory for the controller and fill basic values. */
e = grub_zalloc (sizeof (*e));
if (!e)
return;
e->framelist_chunk = NULL;
e->td_chunk = NULL;
e->qh_chunk = NULL;
e->iobase_ehcc = regs;
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: CAPLEN: %02x\n",
grub_ehci_ehcc_read8 (e, GRUB_EHCI_EHCC_CAPLEN));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: VERSION: %04x\n",
grub_ehci_ehcc_read16 (e, GRUB_EHCI_EHCC_VERSION));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: SPARAMS: %08x\n",
grub_ehci_ehcc_read32 (e, GRUB_EHCI_EHCC_SPARAMS));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: CPARAMS: %08x\n",
grub_ehci_ehcc_read32 (e, GRUB_EHCI_EHCC_CPARAMS));
/* Determine base address of EHCI operational registers */
caplen = grub_ehci_ehcc_read8 (e, GRUB_EHCI_EHCC_CAPLEN);
#ifndef GRUB_HAVE_UNALIGNED_ACCESS
if (caplen & (sizeof (grub_uint32_t) - 1))
{
grub_dprintf ("ehci", "Unaligned caplen\n");
return;
}
e->iobase = ((volatile grub_uint32_t *) e->iobase_ehcc
+ (caplen / sizeof (grub_uint32_t)));
#else
e->iobase = (volatile grub_uint32_t *)
((grub_uint8_t *) e->iobase_ehcc + caplen);
#endif
grub_dprintf ("ehci",
"EHCI grub_ehci_pci_iter: iobase of oper. regs: %08x\n",
(grub_addr_t) e->iobase_ehcc + caplen);
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: COMMAND: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: STATUS: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: INTERRUPT: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_INTERRUPT));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: FRAME_INDEX: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_FRAME_INDEX));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: FL_BASE: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_FL_BASE));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: CUR_AL_ADDR: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_CUR_AL_ADDR));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: CONFIG_FLAG: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_CONFIG_FLAG));
/* Check format of data structures requested by EHCI */
/* XXX: In fact it is not used at any place, it is prepared for future
* This implementation uses 32-bits pointers only */
e->flag64 = ((grub_ehci_ehcc_read32 (e, GRUB_EHCI_EHCC_CPARAMS)
& GRUB_EHCI_CPARAMS_64BIT) != 0);
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: flag64=%d\n", e->flag64);
/* Reserve a page for the frame list - it is accurate for max.
* possible size of framelist. But currently it is not used. */
e->framelist_chunk = grub_memalign_dma32 (4096, 4096);
if (!e->framelist_chunk)
goto fail;
e->framelist_virt = grub_dma_get_virt (e->framelist_chunk);
e->framelist_phys = grub_dma_get_phys (e->framelist_chunk);
grub_memset ((void *) e->framelist_virt, 0, 4096);
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: framelist mem=%p. OK\n",
e->framelist_virt);
/* Allocate memory for the QHs and register it in "e". */
e->qh_chunk = grub_memalign_dma32 (4096,
sizeof (struct grub_ehci_qh) *
GRUB_EHCI_N_QH);
if (!e->qh_chunk)
goto fail;
e->qh_virt = (grub_ehci_qh_t) grub_dma_get_virt (e->qh_chunk);
e->qh_phys = grub_dma_get_phys (e->qh_chunk);
grub_memset ((void *) e->qh_virt, 0,
sizeof (struct grub_ehci_qh) * GRUB_EHCI_N_QH);
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: QH mem=%p. OK\n",
e->qh_virt);
/* Allocate memory for the TDs and register it in "e". */
e->td_chunk = grub_memalign_dma32 (4096,
sizeof (struct grub_ehci_td) *
GRUB_EHCI_N_TD);
if (!e->td_chunk)
goto fail;
e->td_virt = (grub_ehci_td_t) grub_dma_get_virt (e->td_chunk);
e->td_phys = grub_dma_get_phys (e->td_chunk);
grub_memset ((void *) e->td_virt, 0,
sizeof (struct grub_ehci_td) * GRUB_EHCI_N_TD);
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: TD mem=%p. OK\n",
e->td_virt);
/* Setup all frame list pointers. Since no isochronous transfers
are supported, they all point to the (same!) queue
head with index 0. */
fp = grub_cpu_to_le32 ((e->qh_phys & GRUB_EHCI_POINTER_MASK)
| GRUB_EHCI_HPTR_TYPE_QH);
for (i = 0; i < GRUB_EHCI_N_FRAMELIST; i++)
e->framelist_virt[i] = fp;
/* Prepare chain of all TDs and set Terminate in all TDs */
for (i = 0; i < (GRUB_EHCI_N_TD - 1); i++)
{
e->td_virt[i].link_td = e->td_phys + (i + 1) * sizeof (struct grub_ehci_td);
e->td_virt[i].next_td = grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
e->td_virt[i].alt_next_td = grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
}
e->td_virt[GRUB_EHCI_N_TD - 1].next_td =
grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
e->td_virt[GRUB_EHCI_N_TD - 1].alt_next_td =
grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
e->tdfree_virt = e->td_virt;
/* Set Terminate in first QH, which is used in framelist */
e->qh_virt[0].qh_hptr = grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE | GRUB_EHCI_HPTR_TYPE_QH);
e->qh_virt[0].td_overlay.next_td = grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
e->qh_virt[0].td_overlay.alt_next_td =
grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
/* Also set Halted bit in token */
e->qh_virt[0].td_overlay.token = grub_cpu_to_le32_compile_time (GRUB_EHCI_STATUS_HALTED);
/* Set the H bit in first QH used for AL */
e->qh_virt[1].ep_char = grub_cpu_to_le32_compile_time (GRUB_EHCI_H);
/* Set Terminate into TD in rest of QHs and set horizontal link
* pointer to itself - these QHs will be used for asynchronous
* schedule and they should have valid value in horiz. link */
for (i = 1; i < GRUB_EHCI_N_QH; i++)
{
e->qh_virt[i].qh_hptr =
grub_cpu_to_le32 ((grub_dma_virt2phys (&e->qh_virt[i],
e->qh_chunk) &
GRUB_EHCI_POINTER_MASK) | GRUB_EHCI_HPTR_TYPE_QH);
e->qh_virt[i].td_overlay.next_td =
grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
e->qh_virt[i].td_overlay.alt_next_td =
grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
/* Also set Halted bit in token */
e->qh_virt[i].td_overlay.token =
grub_cpu_to_le32_compile_time (GRUB_EHCI_STATUS_HALTED);
}
/* Note: QH 0 and QH 1 are reserved and must not be used anywhere.
* QH 0 is used as empty QH for framelist
* QH 1 is used as starting empty QH for asynchronous schedule
* QH 1 must exist at any time because at least one QH linked to
* itself must exist in asynchronous schedule
* QH 1 has the H flag set to one */
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: QH/TD init. OK\n");
/* Now we can setup EHCI (maybe...) */
/* Check if EHCI is halted and halt it if not */
if (grub_ehci_halt (e) != GRUB_USB_ERR_NONE)
{
grub_error (GRUB_ERR_TIMEOUT,
"EHCI grub_ehci_pci_iter: EHCI halt timeout");
goto fail;
}
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: halted OK\n");
/* Reset EHCI */
if (grub_ehci_reset (e) != GRUB_USB_ERR_NONE)
{
grub_error (GRUB_ERR_TIMEOUT,
"EHCI grub_ehci_pci_iter: EHCI reset timeout");
goto fail;
}
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: reset OK\n");
/* Setup list address registers */
grub_ehci_oper_write32 (e, GRUB_EHCI_FL_BASE, e->framelist_phys);
grub_ehci_oper_write32 (e, GRUB_EHCI_CUR_AL_ADDR,
grub_dma_virt2phys (&e->qh_virt[1],
e->qh_chunk));
/* Set ownership of root hub ports to EHCI */
grub_ehci_oper_write32 (e, GRUB_EHCI_CONFIG_FLAG, GRUB_EHCI_CF_EHCI_OWNER);
/* Enable both lists */
grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND,
GRUB_EHCI_CMD_AS_ENABL
| GRUB_EHCI_CMD_PS_ENABL
| grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND));
/* Now should be possible to power-up and enumerate ports etc. */
if ((grub_ehci_ehcc_read32 (e, GRUB_EHCI_EHCC_SPARAMS)
& GRUB_EHCI_SPARAMS_PPC) != 0)
{ /* EHCI has port powering control */
/* Power on all ports */
n_ports = grub_ehci_ehcc_read32 (e, GRUB_EHCI_EHCC_SPARAMS)
& GRUB_EHCI_SPARAMS_N_PORTS;
for (i = 0; i < (int) n_ports; i++)
grub_ehci_oper_write32 (e, GRUB_EHCI_PORT_STAT_CMD + i * 4,
GRUB_EHCI_PORT_POWER
| grub_ehci_oper_read32 (e,
GRUB_EHCI_PORT_STAT_CMD
+ i * 4));
}
/* Ensure all commands are written */
grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND);
/* Enable EHCI */
grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND,
GRUB_EHCI_CMD_RUNSTOP
| grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND));
/* Ensure command is written */
grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND);
/* Link to ehci now that initialisation is successful. */
e->next = ehci;
ehci = e;
sync_all_caches (e);
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: OK at all\n");
grub_dprintf ("ehci",
"EHCI grub_ehci_pci_iter: iobase of oper. regs: %08x\n",
(grub_addr_t) regs);
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: COMMAND: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: STATUS: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: INTERRUPT: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_INTERRUPT));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: FRAME_INDEX: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_FRAME_INDEX));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: FL_BASE: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_FL_BASE));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: CUR_AL_ADDR: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_CUR_AL_ADDR));
grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: CONFIG_FLAG: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_CONFIG_FLAG));
return;
fail:
if (e)
{
if (e->td_chunk)
grub_dma_free ((void *) e->td_chunk);
if (e->qh_chunk)
grub_dma_free ((void *) e->qh_chunk);
if (e->framelist_chunk)
grub_dma_free (e->framelist_chunk);
}
grub_free (e);
return;
}
static int
grub_ehci_iterate (grub_usb_controller_iterate_hook_t hook, void *hook_data)
{
struct grub_ehci *e;
struct grub_usb_controller dev;
for (e = ehci; e; e = e->next)
{
dev.data = e;
if (hook (&dev, hook_data))
return 1;
}
return 0;
}
static void
grub_ehci_setup_qh (grub_ehci_qh_t qh, grub_usb_transfer_t transfer)
{
grub_uint32_t ep_char = 0;
grub_uint32_t ep_cap = 0;
/* Note: Another part of code is responsible to this QH is
* Halted ! But it can be linked in AL, so we cannot erase or
* change qh_hptr ! */
/* We will not change any TD field because they should/must be
* in safe state from previous use. */
/* EP characteristic setup */
/* Currently not used NAK counter (RL=0),
* C bit set if EP is not HIGH speed and is control,
* Max Packet Length is taken from transfer structure,
* H bit = 0 (because QH[1] has this bit set),
* DTC bit set to 1 because we are using our own toggle bit control,
* SPEED is selected according to value from transfer structure,
* EP number is taken from transfer structure
* "I" bit must not be set,
* Device Address is taken from transfer structure
* */
if ((transfer->dev->speed != GRUB_USB_SPEED_HIGH)
&& (transfer->type == GRUB_USB_TRANSACTION_TYPE_CONTROL))
ep_char |= GRUB_EHCI_C;
ep_char |= (transfer->max << GRUB_EHCI_MAXPLEN_OFF)
& GRUB_EHCI_MAXPLEN_MASK;
ep_char |= GRUB_EHCI_DTC;
switch (transfer->dev->speed)
{
case GRUB_USB_SPEED_LOW:
ep_char |= GRUB_EHCI_SPEED_LOW;
break;
case GRUB_USB_SPEED_FULL:
ep_char |= GRUB_EHCI_SPEED_FULL;
break;
case GRUB_USB_SPEED_HIGH:
default:
ep_char |= GRUB_EHCI_SPEED_HIGH;
/* XXX: How we will handle unknown value of speed? */
}
ep_char |= (transfer->endpoint << GRUB_EHCI_EP_NUM_OFF)
& GRUB_EHCI_EP_NUM_MASK;
ep_char |= transfer->devaddr & GRUB_EHCI_DEVADDR_MASK;
qh->ep_char = grub_cpu_to_le32 (ep_char);
/* EP capabilities setup */
/* MULT field - we try to use max. number
* PortNumber - included now in device structure referenced
* inside transfer structure
* HubAddress - included now in device structure referenced
* inside transfer structure
* SplitCompletionMask - AFAIK it is ignored in asynchronous list,
* InterruptScheduleMask - AFAIK it should be zero in async. list */
ep_cap |= GRUB_EHCI_MULT_THREE;
ep_cap |= (transfer->dev->split_hubport << GRUB_EHCI_DEVPORT_OFF)
& GRUB_EHCI_DEVPORT_MASK;
ep_cap |= (transfer->dev->split_hubaddr << GRUB_EHCI_HUBADDR_OFF)
& GRUB_EHCI_HUBADDR_MASK;
if (transfer->dev->speed == GRUB_USB_SPEED_LOW
&& transfer->type != GRUB_USB_TRANSACTION_TYPE_CONTROL)
{
ep_cap |= (1<<0) << GRUB_EHCI_SMASK_OFF;
ep_cap |= (7<<2) << GRUB_EHCI_CMASK_OFF;
}
qh->ep_cap = grub_cpu_to_le32 (ep_cap);
grub_dprintf ("ehci", "setup_qh: qh=%p, not changed: qh_hptr=%08x\n",
qh, grub_le_to_cpu32 (qh->qh_hptr));
grub_dprintf ("ehci", "setup_qh: ep_char=%08x, ep_cap=%08x\n",
ep_char, ep_cap);
grub_dprintf ("ehci", "setup_qh: end\n");
grub_dprintf ("ehci", "setup_qh: not changed: td_current=%08x\n",
grub_le_to_cpu32 (qh->td_current));
grub_dprintf ("ehci", "setup_qh: not changed: next_td=%08x\n",
grub_le_to_cpu32 (qh->td_overlay.next_td));
grub_dprintf ("ehci", "setup_qh: not changed: alt_next_td=%08x\n",
grub_le_to_cpu32 (qh->td_overlay.alt_next_td));
grub_dprintf ("ehci", "setup_qh: not changed: token=%08x\n",
grub_le_to_cpu32 (qh->td_overlay.token));
}
static grub_ehci_qh_t
grub_ehci_find_qh (struct grub_ehci *e, grub_usb_transfer_t transfer)
{
grub_uint32_t target, mask;
int i;
grub_ehci_qh_t qh = e->qh_virt;
grub_ehci_qh_t head;
grub_uint32_t qh_phys;
grub_uint32_t qh_terminate =
GRUB_EHCI_TERMINATE | GRUB_EHCI_HPTR_TYPE_QH;
grub_ehci_qh_t qh_iter;
/* Prepare part of EP Characteristic to find existing QH */
target = ((transfer->endpoint << GRUB_EHCI_EP_NUM_OFF) |
transfer->devaddr) & GRUB_EHCI_TARGET_MASK;
target = grub_cpu_to_le32 (target);
mask = grub_cpu_to_le32_compile_time (GRUB_EHCI_TARGET_MASK);
/* low speed interrupt transfers are linked to the periodic */
/* schedule, everything else to the asynchronous schedule */
if (transfer->dev->speed == GRUB_USB_SPEED_LOW
&& transfer->type != GRUB_USB_TRANSACTION_TYPE_CONTROL)
head = &qh[0];
else
head = &qh[1];
/* First try to find existing QH with proper target in proper list */
qh_phys = grub_le_to_cpu32( head->qh_hptr );
if (qh_phys != qh_terminate)
qh_iter = grub_dma_phys2virt ( qh_phys & GRUB_EHCI_QHTDPTR_MASK,
e->qh_chunk );
else
qh_iter = NULL;
for (
i = 0;
(qh_phys != qh_terminate) && (qh_iter != NULL) &&
(qh_iter != head) && (i < GRUB_EHCI_N_QH);
i++ )
{
if (target == (qh_iter->ep_char & mask))
{
/* Found proper existing (and linked) QH, do setup of QH */
grub_dprintf ("ehci", "find_qh: found, QH=%p\n", qh_iter);
grub_ehci_setup_qh (qh_iter, transfer);
sync_all_caches (e);
return qh_iter;
}
qh_phys = grub_le_to_cpu32( qh_iter->qh_hptr );
if (qh_phys != qh_terminate)
qh_iter = grub_dma_phys2virt ( qh_phys & GRUB_EHCI_QHTDPTR_MASK,
e->qh_chunk );
else
qh_iter = NULL;
}
/* variable "i" should be never equal to GRUB_EHCI_N_QH here */
if (i >= GRUB_EHCI_N_QH)
{ /* Something very bad happened in QH list(s) ! */
grub_dprintf ("ehci", "find_qh: Mismatch in QH list! head=%p\n",
head);
}
/* QH with target_addr does not exist, we have to find and add it */
for (i = 2; i < GRUB_EHCI_N_QH; i++) /* We ignore zero and first QH */
{
if (!qh[i].ep_char)
break; /* Found first not-allocated QH, finish */
}
/* Have we any free QH in array ? */
if (i >= GRUB_EHCI_N_QH) /* No. */
{
grub_dprintf ("ehci", "find_qh: end - no free QH\n");
return NULL;
}
grub_dprintf ("ehci", "find_qh: new, i=%d, QH=%p\n",
i, &qh[i]);
/* Currently we simply take next (current) QH in array, no allocation
* function is used. It should be no problem until we will need to
* de-allocate QHs of unplugged devices. */
/* We should preset new QH and link it into AL */
grub_ehci_setup_qh (&qh[i], transfer);
/* Linking - this new (last) QH will copy the QH from the head QH */
qh[i].qh_hptr = head->qh_hptr;
/* Linking - the head QH will point to this new QH */
head->qh_hptr = grub_cpu_to_le32 (GRUB_EHCI_HPTR_TYPE_QH
| grub_dma_virt2phys (&qh[i],
e->qh_chunk));
return &qh[i];
}
static grub_ehci_td_t
grub_ehci_alloc_td (struct grub_ehci *e)
{
grub_ehci_td_t ret;
/* Check if there is a Transfer Descriptor available. */
if (!e->tdfree_virt)
{
grub_dprintf ("ehci", "alloc_td: end - no free TD\n");
return NULL;
}
ret = e->tdfree_virt; /* Take current free TD */
/* Advance to next free TD in chain */
if (ret->link_td)
e->tdfree_virt = grub_dma_phys2virt (ret->link_td, e->td_chunk);
else
e->tdfree_virt = NULL;
ret->link_td = 0; /* Reset link_td in allocated TD */
return ret;
}
static void
grub_ehci_free_td (struct grub_ehci *e, grub_ehci_td_t td)
{
/* Chain new free TD & rest */
if (e->tdfree_virt)
td->link_td = grub_dma_virt2phys (e->tdfree_virt, e->td_chunk);
else
td->link_td = 0;
e->tdfree_virt = td; /* Change address of first free TD */
}
static void
grub_ehci_free_tds (struct grub_ehci *e, grub_ehci_td_t td,
grub_usb_transfer_t transfer, grub_size_t * actual)
{
int i; /* Index of TD in transfer */
grub_uint32_t token, to_transfer;
/* Note: Another part of code is responsible to this QH is
* INACTIVE ! */
*actual = 0;
/* Free the TDs in this queue and set last_trans. */
for (i = 0; td; i++)
{
grub_ehci_td_t tdprev;
token = grub_le_to_cpu32 (td->token);
to_transfer = (token & GRUB_EHCI_TOTAL_MASK) >> GRUB_EHCI_TOTAL_OFF;
/* Check state of TD - if it did not transfer
* whole data then set last_trans - it should be last executed TD
* in case when something went wrong. */
if (transfer && (td->size != to_transfer))
transfer->last_trans = i;
*actual += td->size - to_transfer;
/* Unlink the TD */
tdprev = td;
if (td->link_td)
td = grub_dma_phys2virt (td->link_td, e->td_chunk);
else
td = NULL;
/* Free the TD. */
grub_ehci_free_td (e, tdprev);
}
/* Check if last_trans was set. If not and something was
* transferred (it should be all data in this case), set it
* to index of last TD, i.e. i-1 */
if (transfer && (transfer->last_trans < 0) && (*actual != 0))
transfer->last_trans = i - 1;
/* XXX: Fix it: last_trans may be set to bad index.
* Probably we should test more error flags to distinguish
* if TD was at least partialy executed or not at all.
* Generaly, we still could have problem with toggling because
* EHCI can probably split transactions into smaller parts then
* we defined in transaction even if we did not exceed MaxFrame
* length - it probably could happen at the end of microframe (?)
* and if the buffer is crossing page boundary (?). */
}
static grub_ehci_td_t
grub_ehci_transaction (struct grub_ehci *e,
grub_transfer_type_t type,
unsigned int toggle, grub_size_t size,
grub_uint32_t data, grub_ehci_td_t td_alt)
{
grub_ehci_td_t td;
grub_uint32_t token;
grub_uint32_t bufadr;
int i;
/* Test of transfer size, it can be:
* <= GRUB_EHCI_MAXBUFLEN if data aligned to page boundary
* <= GRUB_EHCI_MAXBUFLEN - GRUB_EHCI_BUFPAGELEN if not aligned
* (worst case)
*/
if ((((data % GRUB_EHCI_BUFPAGELEN) == 0)
&& (size > GRUB_EHCI_MAXBUFLEN))
||
(((data % GRUB_EHCI_BUFPAGELEN) != 0)
&& (size > (GRUB_EHCI_MAXBUFLEN - GRUB_EHCI_BUFPAGELEN))))
{
grub_error (GRUB_ERR_OUT_OF_MEMORY,
"too long data buffer for EHCI transaction");
return 0;
}
/* Grab a free Transfer Descriptor and initialize it. */
td = grub_ehci_alloc_td (e);
if (!td)
{
grub_error (GRUB_ERR_OUT_OF_MEMORY,
"no transfer descriptors available for EHCI transfer");
return 0;
}
grub_dprintf ("ehci",
"transaction: type=%d, toggle=%d, size=%lu data=0x%x td=%p\n",
type, toggle, (unsigned long) size, data, td);
/* Fill whole TD by zeros */
grub_memset ((void *) td, 0, sizeof (struct grub_ehci_td));
/* Don't point to any TD yet, just terminate. */
td->next_td = grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
/* Set alternate pointer. When short packet occurs, alternate TD
* will not be really fetched because it is not active. But don't
* forget, EHCI will try to fetch alternate TD every scan of AL
* until QH is halted. */
td->alt_next_td = grub_cpu_to_le32 (grub_dma_virt2phys (td_alt,
e->td_chunk));
/* token:
* TOGGLE - according to toggle
* TOTAL SIZE = size
* Interrupt On Complete = FALSE, we don't need IRQ
* Current Page = 0
* Error Counter = max. value = 3
* PID Code - according to type
* STATUS:
* ACTIVE bit should be set to one
* SPLIT TRANS. STATE bit should be zero. It is ignored
* in HIGH speed transaction, and should be zero for LOW/FULL
* speed to indicate state Do Split Transaction */
token = toggle ? GRUB_EHCI_TOGGLE : 0;
token |= (size << GRUB_EHCI_TOTAL_OFF) & GRUB_EHCI_TOTAL_MASK;
token |= GRUB_EHCI_CERR_3;
switch (type)
{
case GRUB_USB_TRANSFER_TYPE_IN:
token |= GRUB_EHCI_PIDCODE_IN;
break;
case GRUB_USB_TRANSFER_TYPE_OUT:
token |= GRUB_EHCI_PIDCODE_OUT;
break;
case GRUB_USB_TRANSFER_TYPE_SETUP:
token |= GRUB_EHCI_PIDCODE_SETUP;
break;
default: /* XXX: Should not happen, but what to do if it does ? */
break;
}
token |= GRUB_EHCI_STATUS_ACTIVE;
td->token = grub_cpu_to_le32 (token);
/* Fill buffer pointers according to size */
bufadr = data;
td->buffer_page[0] = grub_cpu_to_le32 (bufadr);
bufadr = ((bufadr / GRUB_EHCI_BUFPAGELEN) + 1) * GRUB_EHCI_BUFPAGELEN;
for (i = 1; ((bufadr - data) < size) && (i < GRUB_EHCI_TD_BUF_PAGES); i++)
{
td->buffer_page[i] = grub_cpu_to_le32 (bufadr & GRUB_EHCI_BUFPTR_MASK);
bufadr = ((bufadr / GRUB_EHCI_BUFPAGELEN) + 1) * GRUB_EHCI_BUFPAGELEN;
}
/* Remember data size for future use... */
td->size = (grub_uint32_t) size;
grub_dprintf ("ehci", "td=%p\n", td);
grub_dprintf ("ehci", "HW: next_td=%08x, alt_next_td=%08x\n",
grub_le_to_cpu32 (td->next_td),
grub_le_to_cpu32 (td->alt_next_td));
grub_dprintf ("ehci", "HW: token=%08x, buffer[0]=%08x\n",
grub_le_to_cpu32 (td->token),
grub_le_to_cpu32 (td->buffer_page[0]));
grub_dprintf ("ehci", "HW: buffer[1]=%08x, buffer[2]=%08x\n",
grub_le_to_cpu32 (td->buffer_page[1]),
grub_le_to_cpu32 (td->buffer_page[2]));
grub_dprintf ("ehci", "HW: buffer[3]=%08x, buffer[4]=%08x\n",
grub_le_to_cpu32 (td->buffer_page[3]),
grub_le_to_cpu32 (td->buffer_page[4]));
grub_dprintf ("ehci", "link_td=%08x, size=%08x\n",
td->link_td, td->size);
return td;
}
struct grub_ehci_transfer_controller_data
{
grub_ehci_qh_t qh_virt;
grub_ehci_td_t td_first_virt;
grub_ehci_td_t td_alt_virt;
grub_ehci_td_t td_last_virt;
grub_uint32_t td_last_phys;
};
static grub_usb_err_t
grub_ehci_setup_transfer (grub_usb_controller_t dev,
grub_usb_transfer_t transfer)
{
struct grub_ehci *e = (struct grub_ehci *) dev->data;
grub_ehci_td_t td = NULL;
grub_ehci_td_t td_prev = NULL;
int i;
struct grub_ehci_transfer_controller_data *cdata;
grub_uint32_t status;
sync_all_caches (e);
/* Check if EHCI is running and AL is enabled */
status = grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS);
if ((status & GRUB_EHCI_ST_HC_HALTED) != 0)
/* XXX: Fix it: Currently we don't do anything to restart EHCI */
{
grub_dprintf ("ehci", "setup_transfer: halted, status = 0x%x\n",
status);
return GRUB_USB_ERR_INTERNAL;
}
status = grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS);
if ((status
& (GRUB_EHCI_ST_AS_STATUS | GRUB_EHCI_ST_PS_STATUS)) == 0)
/* XXX: Fix it: Currently we don't do anything to restart EHCI */
{
grub_dprintf ("ehci", "setup_transfer: no AS/PS, status = 0x%x\n",
status);
return GRUB_USB_ERR_INTERNAL;
}
/* Allocate memory for controller transfer data. */
cdata = grub_malloc (sizeof (*cdata));
if (!cdata)
return GRUB_USB_ERR_INTERNAL;
cdata->td_first_virt = NULL;
/* Allocate a queue head for the transfer queue. */
cdata->qh_virt = grub_ehci_find_qh (e, transfer);
if (!cdata->qh_virt)
{
grub_dprintf ("ehci", "setup_transfer: no QH\n");
grub_free (cdata);
return GRUB_USB_ERR_INTERNAL;
}
/* To detect short packet we need some additional "alternate" TD,
* allocate it first. */
cdata->td_alt_virt = grub_ehci_alloc_td (e);
if (!cdata->td_alt_virt)
{
grub_dprintf ("ehci", "setup_transfer: no TDs\n");
grub_free (cdata);
return GRUB_USB_ERR_INTERNAL;
}
/* Fill whole alternate TD by zeros (= inactive) and set
* Terminate bits and Halt bit */
grub_memset ((void *) cdata->td_alt_virt, 0, sizeof (struct grub_ehci_td));
cdata->td_alt_virt->next_td = grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
cdata->td_alt_virt->alt_next_td = grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
cdata->td_alt_virt->token = grub_cpu_to_le32_compile_time (GRUB_EHCI_STATUS_HALTED);
/* Allocate appropriate number of TDs and set */
for (i = 0; i < transfer->transcnt; i++)
{
grub_usb_transaction_t tr = &transfer->transactions[i];
td = grub_ehci_transaction (e, tr->pid, tr->toggle, tr->size,
tr->data, cdata->td_alt_virt);
if (!td) /* de-allocate and free all */
{
grub_size_t actual = 0;
if (cdata->td_first_virt)
grub_ehci_free_tds (e, cdata->td_first_virt, NULL, &actual);
grub_free (cdata);
grub_dprintf ("ehci", "setup_transfer: no TD\n");
return GRUB_USB_ERR_INTERNAL;
}
/* Register new TD in cdata or previous TD */
if (!cdata->td_first_virt)
cdata->td_first_virt = td;
else
{
td_prev->link_td = grub_dma_virt2phys (td, e->td_chunk);
td_prev->next_td =
grub_cpu_to_le32 (grub_dma_virt2phys (td, e->td_chunk));
}
td_prev = td;
}
/* Remember last TD */
cdata->td_last_virt = td;
cdata->td_last_phys = grub_dma_virt2phys (td, e->td_chunk);
/* Last TD should not have set alternate TD */
cdata->td_last_virt->alt_next_td = grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
grub_dprintf ("ehci", "setup_transfer: cdata=%p, qh=%p\n",
cdata,cdata->qh_virt);
grub_dprintf ("ehci", "setup_transfer: td_first=%p, td_alt=%p\n",
cdata->td_first_virt,
cdata->td_alt_virt);
grub_dprintf ("ehci", "setup_transfer: td_last=%p\n",
cdata->td_last_virt);
/* Start transfer: */
/* Unlink possible alternate pointer in QH */
cdata->qh_virt->td_overlay.alt_next_td =
grub_cpu_to_le32_compile_time (GRUB_EHCI_TERMINATE);
/* Link new TDs with QH via next_td */
cdata->qh_virt->td_overlay.next_td =
grub_cpu_to_le32 (grub_dma_virt2phys
(cdata->td_first_virt, e->td_chunk));
/* Reset Active and Halted bits in QH to activate Advance Queue,
* i.e. reset token */
cdata->qh_virt->td_overlay.token = grub_cpu_to_le32_compile_time (0);
sync_all_caches (e);
/* Finito */
transfer->controller_data = cdata;
return GRUB_USB_ERR_NONE;
}
/* This function expects QH is not active.
* Function set Halt bit in QH TD overlay and possibly prints
* necessary debug information. */
static void
grub_ehci_pre_finish_transfer (grub_usb_transfer_t transfer)
{
struct grub_ehci_transfer_controller_data *cdata =
transfer->controller_data;
/* Collect debug data here if necessary */
/* Set Halt bit in not active QH. AL will not attempt to do
* Advance Queue on QH with Halt bit set, i.e., we can then
* safely manipulate with QH TD part. */
cdata->qh_virt->td_overlay.token = (cdata->qh_virt->td_overlay.token
|
grub_cpu_to_le32_compile_time
(GRUB_EHCI_STATUS_HALTED)) &
grub_cpu_to_le32_compile_time (~GRUB_EHCI_STATUS_ACTIVE);
/* Print debug data here if necessary */
}
static grub_usb_err_t
grub_ehci_parse_notrun (grub_usb_controller_t dev,
grub_usb_transfer_t transfer, grub_size_t * actual)
{
struct grub_ehci *e = dev->data;
struct grub_ehci_transfer_controller_data *cdata =
transfer->controller_data;
grub_dprintf ("ehci", "parse_notrun: info\n");
/* QH can be in any state in this case. */
/* But EHCI or AL is not running, so QH is surely not active
* even if it has Active bit set... */
grub_ehci_pre_finish_transfer (transfer);
grub_ehci_free_tds (e, cdata->td_first_virt, transfer, actual);
grub_ehci_free_td (e, cdata->td_alt_virt);
grub_free (cdata);
sync_all_caches (e);
/* Additionally, do something with EHCI to make it running (what?) */
/* Try enable EHCI and AL */
grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND,
GRUB_EHCI_CMD_RUNSTOP | GRUB_EHCI_CMD_AS_ENABL
| GRUB_EHCI_CMD_PS_ENABL
| grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND));
/* Ensure command is written */
grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND);
return GRUB_USB_ERR_UNRECOVERABLE;
}
static grub_usb_err_t
grub_ehci_parse_halt (grub_usb_controller_t dev,
grub_usb_transfer_t transfer, grub_size_t * actual)
{
struct grub_ehci *e = dev->data;
struct grub_ehci_transfer_controller_data *cdata =
transfer->controller_data;
grub_uint32_t token;
grub_usb_err_t err = GRUB_USB_ERR_NAK;
/* QH should be halted and not active in this case. */
grub_dprintf ("ehci", "parse_halt: info\n");
/* Remember token before call pre-finish function */
token = grub_le_to_cpu32 (cdata->qh_virt->td_overlay.token);
/* Do things like in normal finish */
grub_ehci_pre_finish_transfer (transfer);
grub_ehci_free_tds (e, cdata->td_first_virt, transfer, actual);
grub_ehci_free_td (e, cdata->td_alt_virt);
grub_free (cdata);
sync_all_caches (e);
/* Evaluation of error code - currently we don't have GRUB USB error
* codes for some EHCI states, GRUB_USB_ERR_DATA is used for them.
* Order of evaluation is critical, specially bubble/stall. */
if ((token & GRUB_EHCI_STATUS_BABBLE) != 0)
err = GRUB_USB_ERR_BABBLE;
else if ((token & GRUB_EHCI_CERR_MASK) != 0)
err = GRUB_USB_ERR_STALL;
else if ((token & GRUB_EHCI_STATUS_TRANERR) != 0)
err = GRUB_USB_ERR_DATA;
else if ((token & GRUB_EHCI_STATUS_BUFERR) != 0)
err = GRUB_USB_ERR_DATA;
else if ((token & GRUB_EHCI_STATUS_MISSDMF) != 0)
err = GRUB_USB_ERR_DATA;
return err;
}
static grub_usb_err_t
grub_ehci_parse_success (grub_usb_controller_t dev,
grub_usb_transfer_t transfer, grub_size_t * actual)
{
struct grub_ehci *e = dev->data;
struct grub_ehci_transfer_controller_data *cdata =
transfer->controller_data;
grub_dprintf ("ehci", "parse_success: info\n");
/* QH should be not active in this case, but it is not halted. */
grub_ehci_pre_finish_transfer (transfer);
grub_ehci_free_tds (e, cdata->td_first_virt, transfer, actual);
grub_ehci_free_td (e, cdata->td_alt_virt);
grub_free (cdata);
sync_all_caches (e);
return GRUB_USB_ERR_NONE;
}
static grub_usb_err_t
grub_ehci_check_transfer (grub_usb_controller_t dev,
grub_usb_transfer_t transfer, grub_size_t * actual)
{
struct grub_ehci *e = dev->data;
struct grub_ehci_transfer_controller_data *cdata =
transfer->controller_data;
grub_uint32_t token, token_ftd;
sync_all_caches (e);
grub_dprintf ("ehci",
"check_transfer: EHCI STATUS=%08x, cdata=%p, qh=%p\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS),
cdata, cdata->qh_virt);
grub_dprintf ("ehci", "check_transfer: qh_hptr=%08x, ep_char=%08x\n",
grub_le_to_cpu32 (cdata->qh_virt->qh_hptr),
grub_le_to_cpu32 (cdata->qh_virt->ep_char));
grub_dprintf ("ehci", "check_transfer: ep_cap=%08x, td_current=%08x\n",
grub_le_to_cpu32 (cdata->qh_virt->ep_cap),
grub_le_to_cpu32 (cdata->qh_virt->td_current));
grub_dprintf ("ehci", "check_transfer: next_td=%08x, alt_next_td=%08x\n",
grub_le_to_cpu32 (cdata->qh_virt->td_overlay.next_td),
grub_le_to_cpu32 (cdata->qh_virt->td_overlay.alt_next_td));
grub_dprintf ("ehci", "check_transfer: token=%08x, buffer[0]=%08x\n",
grub_le_to_cpu32 (cdata->qh_virt->td_overlay.token),
grub_le_to_cpu32 (cdata->qh_virt->td_overlay.buffer_page[0]));
/* Check if EHCI is running and AL is enabled */
if ((grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS)
& GRUB_EHCI_ST_HC_HALTED) != 0)
return grub_ehci_parse_notrun (dev, transfer, actual);
if ((grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS)
& (GRUB_EHCI_ST_AS_STATUS | GRUB_EHCI_ST_PS_STATUS)) == 0)
return grub_ehci_parse_notrun (dev, transfer, actual);
token = grub_le_to_cpu32 (cdata->qh_virt->td_overlay.token);
/* If the transfer consist from only one TD, we should check */
/* if the TD was really executed and deactivated - to prevent */
/* false detection of transfer finish. */
token_ftd = grub_le_to_cpu32 (cdata->td_first_virt->token);
/* Detect QH halted */
if ((token & GRUB_EHCI_STATUS_HALTED) != 0)
return grub_ehci_parse_halt (dev, transfer, actual);
/* Detect QH not active - QH is not active and no next TD */
if (token && ((token & GRUB_EHCI_STATUS_ACTIVE) == 0)
&& ((token_ftd & GRUB_EHCI_STATUS_ACTIVE) == 0))
{
/* It could be finish at all or short packet condition */
if ((grub_le_to_cpu32 (cdata->qh_virt->td_overlay.next_td)
& GRUB_EHCI_TERMINATE) &&
((grub_le_to_cpu32 (cdata->qh_virt->td_current)
& GRUB_EHCI_QHTDPTR_MASK) == cdata->td_last_phys))
/* Normal finish */
return grub_ehci_parse_success (dev, transfer, actual);
else if ((token & GRUB_EHCI_TOTAL_MASK) != 0)
/* Short packet condition */
/* But currently we don't handle it - higher level will do it */
return grub_ehci_parse_success (dev, transfer, actual);
}
return GRUB_USB_ERR_WAIT;
}
static grub_usb_err_t
grub_ehci_cancel_transfer (grub_usb_controller_t dev,
grub_usb_transfer_t transfer)
{
struct grub_ehci *e = dev->data;
struct grub_ehci_transfer_controller_data *cdata =
transfer->controller_data;
grub_size_t actual;
int i;
grub_uint64_t maxtime;
grub_uint32_t qh_phys;
sync_all_caches (e);
grub_uint32_t interrupt =
cdata->qh_virt->ep_cap & GRUB_EHCI_SMASK_MASK;
/* QH can be active and should be de-activated and halted */
grub_dprintf ("ehci", "cancel_transfer: begin\n");
/* First check if EHCI is running - if not, there is no problem */
/* to cancel any transfer. Or, if transfer is asynchronous, check */
/* if AL is enabled - if not, transfer can be canceled also. */
if (((grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS) &
GRUB_EHCI_ST_HC_HALTED) != 0) ||
(!interrupt && ((grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS) &
(GRUB_EHCI_ST_AS_STATUS | GRUB_EHCI_ST_PS_STATUS)) == 0)))
{
grub_ehci_pre_finish_transfer (transfer);
grub_ehci_free_tds (e, cdata->td_first_virt, transfer, &actual);
grub_ehci_free_td (e, cdata->td_alt_virt);
grub_free (cdata);
sync_all_caches (e);
grub_dprintf ("ehci", "cancel_transfer: end - EHCI not running\n");
return GRUB_USB_ERR_NONE;
}
/* EHCI and (AL or SL) are running. What to do? */
/* Try to Halt QH via de-scheduling QH. */
/* Find index of previous QH */
qh_phys = grub_dma_virt2phys(cdata->qh_virt, e->qh_chunk);
for (i = 0; i < GRUB_EHCI_N_QH; i++)
{
if ((grub_le_to_cpu32(e->qh_virt[i].qh_hptr)
& GRUB_EHCI_QHTDPTR_MASK) == qh_phys)
break;
}
if (i == GRUB_EHCI_N_QH)
{
grub_printf ("%s: prev not found, queues are corrupt\n", __func__);
return GRUB_USB_ERR_UNRECOVERABLE;
}
/* Unlink QH from AL */
e->qh_virt[i].qh_hptr = cdata->qh_virt->qh_hptr;
sync_all_caches (e);
/* If this is an interrupt transfer, we just wait for the periodic
* schedule to advance a few times and then assume that the EHCI
* controller has read the updated QH. */
if (cdata->qh_virt->ep_cap & GRUB_EHCI_SMASK_MASK)
{
grub_millisleep(20);
}
else
{
/* For the asynchronous schedule we use the advance doorbell to find
* out when the EHCI controller has read the updated QH. */
/* Ring the doorbell */
grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND,
GRUB_EHCI_CMD_AS_ADV_D
| grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND));
/* Ensure command is written */
grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND);
/* Wait answer with timeout */
maxtime = grub_get_time_ms () + 2;
while (((grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS)
& GRUB_EHCI_ST_AS_ADVANCE) == 0)
&& (grub_get_time_ms () < maxtime));
/* We do not detect the timeout because if timeout occurs, it most
* probably means something wrong with EHCI - maybe stopped etc. */
/* Shut up the doorbell */
grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND,
~GRUB_EHCI_CMD_AS_ADV_D
& grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND));
grub_ehci_oper_write32 (e, GRUB_EHCI_STATUS,
GRUB_EHCI_ST_AS_ADVANCE
| grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS));
/* Ensure command is written */
grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS);
}
/* Now is QH out of AL and we can do anything with it... */
grub_ehci_pre_finish_transfer (transfer);
grub_ehci_free_tds (e, cdata->td_first_virt, transfer, &actual);
grub_ehci_free_td (e, cdata->td_alt_virt);
/* "Free" the QH - link it to itself */
cdata->qh_virt->ep_char = 0;
cdata->qh_virt->qh_hptr =
grub_cpu_to_le32 ((grub_dma_virt2phys (cdata->qh_virt,
e->qh_chunk)
& GRUB_EHCI_POINTER_MASK) | GRUB_EHCI_HPTR_TYPE_QH);
grub_free (cdata);
grub_dprintf ("ehci", "cancel_transfer: end\n");
sync_all_caches (e);
return GRUB_USB_ERR_NONE;
}
static int
grub_ehci_hubports (grub_usb_controller_t dev)
{
struct grub_ehci *e = (struct grub_ehci *) dev->data;
grub_uint32_t portinfo;
portinfo = grub_ehci_ehcc_read32 (e, GRUB_EHCI_EHCC_SPARAMS)
& GRUB_EHCI_SPARAMS_N_PORTS;
grub_dprintf ("ehci", "root hub ports=%d\n", portinfo);
return portinfo;
}
static grub_usb_err_t
grub_ehci_portstatus (grub_usb_controller_t dev,
unsigned int port, unsigned int enable)
{
struct grub_ehci *e = (struct grub_ehci *) dev->data;
grub_uint64_t endtime;
grub_dprintf ("ehci", "portstatus: EHCI STATUS: %08x\n",
grub_ehci_oper_read32 (e, GRUB_EHCI_STATUS));
grub_dprintf ("ehci",
"portstatus: begin, iobase=%p, port=%d, status=0x%02x\n",
e->iobase, port, grub_ehci_port_read (e, port));
/* In any case we need to disable port:
* - if enable==false - we should disable port
* - if enable==true we will do the reset and the specification says
* PortEnable should be FALSE in such case */
/* Disable the port and wait for it. */
grub_ehci_port_resbits (e, port, GRUB_EHCI_PORT_ENABLED);
endtime = grub_get_time_ms () + 1000;
while (grub_ehci_port_read (e, port) & GRUB_EHCI_PORT_ENABLED)
if (grub_get_time_ms () > endtime)
return GRUB_USB_ERR_TIMEOUT;
if (!enable) /* We don't need reset port */
{
grub_dprintf ("ehci", "portstatus: Disabled.\n");
grub_dprintf ("ehci", "portstatus: end, status=0x%02x\n",
grub_ehci_port_read (e, port));
return GRUB_USB_ERR_NONE;
}
grub_dprintf ("ehci", "portstatus: enable\n");
grub_boot_time ("Resetting port %d", port);
/* Now we will do reset - if HIGH speed device connected, it will
* result in Enabled state, otherwise port remains disabled. */
/* Set RESET bit for 50ms */
grub_ehci_port_setbits (e, port, GRUB_EHCI_PORT_RESET);
grub_millisleep (50);
/* Reset RESET bit and wait for the end of reset */
grub_ehci_port_resbits (e, port, GRUB_EHCI_PORT_RESET);
endtime = grub_get_time_ms () + 1000;
while (grub_ehci_port_read (e, port) & GRUB_EHCI_PORT_RESET)
if (grub_get_time_ms () > endtime)
return GRUB_USB_ERR_TIMEOUT;
grub_boot_time ("Port %d reset", port);
/* Remember "we did the reset" - needed by detect_dev */
e->reset |= (1 << port);
/* Test if port enabled, i.e. HIGH speed device connected */
if ((grub_ehci_port_read (e, port) & GRUB_EHCI_PORT_ENABLED) != 0) /* yes! */
{
grub_dprintf ("ehci", "portstatus: Enabled!\n");
/* "Reset recovery time" (USB spec.) */
grub_millisleep (10);
}
else /* no... */
{
/* FULL speed device connected - change port ownership.
* It results in disconnected state of this EHCI port. */
grub_ehci_port_setbits (e, port, GRUB_EHCI_PORT_OWNER);
return GRUB_USB_ERR_BADDEVICE;
}
/* XXX: Fix it! There is possible problem - we can say to calling
* function that we lost device if it is FULL speed onlu via
* return value <> GRUB_ERR_NONE. It (maybe) displays also error
* message on screen - but this situation is not error, it is normal
* state! */
grub_dprintf ("ehci", "portstatus: end, status=0x%02x\n",
grub_ehci_port_read (e, port));
return GRUB_USB_ERR_NONE;
}
static grub_usb_speed_t
grub_ehci_detect_dev (grub_usb_controller_t dev, int port, int *changed)
{
struct grub_ehci *e = (struct grub_ehci *) dev->data;
grub_uint32_t status, line_state;
status = grub_ehci_port_read (e, port);
/* Connect Status Change bit - it detects change of connection */
if (status & GRUB_EHCI_PORT_CONNECT_CH)
{
*changed = 1;
/* Reset bit Connect Status Change */
grub_ehci_port_setbits (e, port, GRUB_EHCI_PORT_CONNECT_CH);
}
else
*changed = 0;
if (!(status & GRUB_EHCI_PORT_CONNECT))
{ /* We should reset related "reset" flag in not connected state */
e->reset &= ~(1 << port);
return GRUB_USB_SPEED_NONE;
}
/* Detected connected state, so we should return speed.
* But we can detect only LOW speed device and only at connection
* time when PortEnabled=FALSE. FULL / HIGH speed detection is made
* later by EHCI-specific reset procedure.
* Another thing - if detected speed is LOW at connection time,
* we should change port ownership to companion controller.
* So:
* 1. If we detect connected and enabled and EHCI-owned port,
* we can say it is HIGH speed.
* 2. If we detect connected and not EHCI-owned port, we can say
* NONE speed, because such devices are not handled by EHCI.
* 3. If we detect connected, not enabled but reset port, we can say
* NONE speed, because it means FULL device connected to port and
* such devices are not handled by EHCI.
* 4. If we detect connected, not enabled and not reset port, which
* has line state != "K", we will say HIGH - it could be FULL or HIGH
* device, we will see it later after end of EHCI-specific reset
* procedure.
* 5. If we detect connected, not enabled and not reset port, which
* has line state == "K", we can say NONE speed, because LOW speed
* device is connected and we should change port ownership. */
if ((status & GRUB_EHCI_PORT_ENABLED) != 0) /* Port already enabled, return high speed. */
return GRUB_USB_SPEED_HIGH;
if ((status & GRUB_EHCI_PORT_OWNER) != 0) /* EHCI is not port owner */
return GRUB_USB_SPEED_NONE; /* EHCI driver is ignoring this port. */
if ((e->reset & (1 << port)) != 0) /* Port reset was done = FULL speed */
return GRUB_USB_SPEED_NONE; /* EHCI driver is ignoring this port. */
else /* Port connected but not enabled - test port speed. */
{
line_state = status & GRUB_EHCI_PORT_LINE_STAT;
if (line_state != GRUB_EHCI_PORT_LINE_LOWSP)
return GRUB_USB_SPEED_HIGH;
/* Detected LOW speed device, we should change
* port ownership.
* XXX: Fix it!: There should be test if related companion
* controler is available ! And what to do if it does not exist ? */
grub_ehci_port_setbits (e, port, GRUB_EHCI_PORT_OWNER);
return GRUB_USB_SPEED_NONE; /* Ignore this port */
/* Note: Reset of PORT_OWNER bit is done by EHCI HW when
* device is really disconnected from port.
* Don't do PORT_OWNER bit reset by SW when not connected signal
* is detected in port register ! */
}
}
static grub_err_t
grub_ehci_restore_hw (void)
{
struct grub_ehci *e;
grub_uint32_t n_ports;
int i;
/* We should re-enable all EHCI HW similarly as on inithw */
for (e = ehci; e; e = e->next)
{
/* Check if EHCI is halted and halt it if not */
if (grub_ehci_halt (e) != GRUB_USB_ERR_NONE)
grub_error (GRUB_ERR_TIMEOUT, "restore_hw: EHCI halt timeout");
/* Reset EHCI */
if (grub_ehci_reset (e) != GRUB_USB_ERR_NONE)
grub_error (GRUB_ERR_TIMEOUT, "restore_hw: EHCI reset timeout");
/* Setup some EHCI registers and enable EHCI */
grub_ehci_oper_write32 (e, GRUB_EHCI_FL_BASE, e->framelist_phys);
grub_ehci_oper_write32 (e, GRUB_EHCI_CUR_AL_ADDR,
grub_dma_virt2phys (&e->qh_virt[1],
e->qh_chunk));
grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND,
GRUB_EHCI_CMD_RUNSTOP |
grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND));
/* Set ownership of root hub ports to EHCI */
grub_ehci_oper_write32 (e, GRUB_EHCI_CONFIG_FLAG,
GRUB_EHCI_CF_EHCI_OWNER);
/* Enable asynchronous list */
grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND,
GRUB_EHCI_CMD_AS_ENABL
| GRUB_EHCI_CMD_PS_ENABL
| grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND));
/* Now should be possible to power-up and enumerate ports etc. */
if ((grub_ehci_ehcc_read32 (e, GRUB_EHCI_EHCC_SPARAMS)
& GRUB_EHCI_SPARAMS_PPC) != 0)
{ /* EHCI has port powering control */
/* Power on all ports */
n_ports = grub_ehci_ehcc_read32 (e, GRUB_EHCI_EHCC_SPARAMS)
& GRUB_EHCI_SPARAMS_N_PORTS;
for (i = 0; i < (int) n_ports; i++)
grub_ehci_oper_write32 (e, GRUB_EHCI_PORT_STAT_CMD + i * 4,
GRUB_EHCI_PORT_POWER
| grub_ehci_oper_read32 (e,
GRUB_EHCI_PORT_STAT_CMD
+ i * 4));
}
}
return GRUB_ERR_NONE;
}
static grub_err_t
grub_ehci_fini_hw (int noreturn __attribute__ ((unused)))
{
struct grub_ehci *e;
/* We should disable all EHCI HW to prevent any DMA access etc. */
for (e = ehci; e; e = e->next)
{
/* Disable both lists */
grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND,
~(GRUB_EHCI_CMD_AS_ENABL | GRUB_EHCI_CMD_PS_ENABL)
& grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND));
/* Check if EHCI is halted and halt it if not */
grub_ehci_halt (e);
/* Reset EHCI */
grub_ehci_reset (e);
}
return GRUB_ERR_NONE;
}
static struct grub_usb_controller_dev usb_controller = {
.name = "ehci",
.iterate = grub_ehci_iterate,
.setup_transfer = grub_ehci_setup_transfer,
.check_transfer = grub_ehci_check_transfer,
.cancel_transfer = grub_ehci_cancel_transfer,
.hubports = grub_ehci_hubports,
.portstatus = grub_ehci_portstatus,
.detect_dev = grub_ehci_detect_dev,
/* estimated max. count of TDs for one bulk transfer */
.max_bulk_tds = GRUB_EHCI_N_TD * 3 / 4
};
GRUB_MOD_INIT (ehci)
{
COMPILE_TIME_ASSERT (sizeof (struct grub_ehci_td) == 64);
COMPILE_TIME_ASSERT (sizeof (struct grub_ehci_qh) == 96);
grub_stop_disk_firmware ();
grub_boot_time ("Initing EHCI hardware");
grub_ehci_pci_scan ();
grub_boot_time ("Registering EHCI driver");
grub_usb_controller_dev_register (&usb_controller);
grub_boot_time ("EHCI driver registered");
grub_loader_register_preboot_hook (grub_ehci_fini_hw, grub_ehci_restore_hw,
GRUB_LOADER_PREBOOT_HOOK_PRIO_DISK);
}
GRUB_MOD_FINI (ehci)
{
grub_ehci_fini_hw (0);
grub_usb_controller_dev_unregister (&usb_controller);
}
Reference in a new issue View git blame Copy permalink