vbatts/grub
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
grub/grub-core/boot/i386/pc/startup_raw.S
Vladimir 'phcoder' Serbinenko ef023e42a2 * grub-core/boot/i386/pc/startup_raw.S: Move decompressor_end to .bss 
to ensure that it's after the last byte of .text.
2012-03-02 11:24:24 +01:00

356 lines
7.4 KiB
ArmAsm
Raw Blame History

/*
* GRUB -- GRand Unified Bootloader
* Copyright (C) 1999,2000,2001,2002,2003,2005,2006,2007,2008,2009,2011 Free Software Foundation, Inc.
*
* GRUB is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* GRUB is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with GRUB. If not, see <http://www.gnu.org/licenses/>.
*/
#include <config.h>
#include <grub/symbol.h>
#include <grub/offsets.h>
#include <grub/machine/boot.h>
#include <grub/machine/memory.h>
#include <grub/machine/kernel.h>
#define ABS(x) ((x) - LOCAL (base) + GRUB_BOOT_MACHINE_KERNEL_ADDR + 0x200)
.file "startup_raw.S"
.text
/* Tell GAS to generate 16-bit instructions so that this code works
in real mode. */
.code16
.globl start, _start
start:
_start:
LOCAL (base):
/*
* Guarantee that "main" is loaded at 0x0:0x8200.
*/
#ifdef __APPLE__
ljmp $0, $(ABS(LOCAL (codestart)) - 0x10000)
#else
ljmp $0, $ABS(LOCAL (codestart))
#endif
/*
* This is a special data area.
*/
. = _start + GRUB_DECOMPRESSOR_MACHINE_COMPRESSED_SIZE
LOCAL(compressed_size):
.long 0
. = _start + GRUB_DECOMPRESSOR_MACHINE_UNCOMPRESSED_SIZE
LOCAL(uncompressed_size):
.long 0
. = _start + GRUB_KERNEL_I386_PC_REED_SOLOMON_REDUNDANCY
reed_solomon_redundancy:
.long 0
. = _start + GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_LENGTH
.short (LOCAL(reed_solomon_part) - _start)
/*
* This is the area for all of the special variables.
*/
. = _start + GRUB_DECOMPRESSOR_I386_PC_BOOT_DEVICE
LOCAL(boot_dev):
.byte 0xFF, 0xFF, 0xFF
LOCAL(boot_drive):
.byte 0x00
/* the real mode code continues... */
LOCAL (codestart):
cli /* we're not safe here! */
/* set up %ds, %ss, and %es */
xorw %ax, %ax
movw %ax, %ds
movw %ax, %ss
movw %ax, %es
/* set up the real mode/BIOS stack */
movl $GRUB_MEMORY_MACHINE_REAL_STACK, %ebp
movl %ebp, %esp
sti /* we're safe again */
/* save the boot drive */
ADDR32 movb %dl, LOCAL(boot_drive)
/* reset disk system (%ah = 0) */
int $0x13
/* transition to protected mode */
DATA32 call real_to_prot
/* The ".code32" directive takes GAS out of 16-bit mode. */
.code32
incl %eax
cld
call grub_gate_a20
movl LOCAL(compressed_size), %edx
addl $(LOCAL(decompressor_end) - LOCAL(reed_solomon_part)), %edx
movl reed_solomon_redundancy, %ecx
leal LOCAL(reed_solomon_part), %eax
cld
call EXT_C (grub_reed_solomon_recover)
jmp post_reed_solomon
#include "../../../kern/i386/realmode.S"
#include <rs_decoder.S>
.text
/*
* grub_gate_a20(int on)
*
* Gate address-line 20 for high memory.
*
* This routine is probably overconservative in what it does, but so what?
*
* It also eats any keystrokes in the keyboard buffer. :-(
*/
grub_gate_a20:
movl %eax, %edx
gate_a20_test_current_state:
/* first of all, test if already in a good state */
call gate_a20_check_state
cmpb %al, %dl
jnz gate_a20_try_bios
ret
gate_a20_try_bios:
/* second, try a BIOS call */
pushl %ebp
call prot_to_real
.code16
movw $0x2400, %ax
testb %dl, %dl
jz 1f
incw %ax
1: int $0x15
DATA32 call real_to_prot
.code32
popl %ebp
call gate_a20_check_state
cmpb %al, %dl
jnz gate_a20_try_system_control_port_a
ret
gate_a20_try_system_control_port_a:
/*
* In macbook, the keyboard test would hang the machine, so we move
* this forward.
*/
/* fourth, try the system control port A */
inb $0x92
andb $(~0x03), %al
testb %dl, %dl
jz 6f
orb $0x02, %al
6: outb $0x92
/* When turning off Gate A20, do not check the state strictly,
because a failure is not fatal usually, and Gate A20 is always
on some modern machines. */
testb %dl, %dl
jz 7f
call gate_a20_check_state
cmpb %al, %dl
jnz gate_a20_try_keyboard_controller
7: ret
gate_a20_flush_keyboard_buffer:
inb $0x64
andb $0x02, %al
jnz gate_a20_flush_keyboard_buffer
2:
inb $0x64
andb $0x01, %al
jz 3f
inb $0x60
jmp 2b
3:
ret
gate_a20_try_keyboard_controller:
/* third, try the keyboard controller */
call gate_a20_flush_keyboard_buffer
movb $0xd1, %al
outb $0x64
4:
inb $0x64
andb $0x02, %al
jnz 4b
movb $0xdd, %al
testb %dl, %dl
jz 5f
orb $0x02, %al
5: outb $0x60
call gate_a20_flush_keyboard_buffer
/* output a dummy command (USB keyboard hack) */
movb $0xff, %al
outb $0x64
call gate_a20_flush_keyboard_buffer
call gate_a20_check_state
cmpb %al, %dl
/* everything failed, so restart from the beginning */
jnz gate_a20_try_bios
ret
gate_a20_check_state:
/* iterate the checking for a while */
movl $100, %ecx
1:
call 3f
cmpb %al, %dl
jz 2f
loop 1b
2:
ret
3:
pushl %ebx
pushl %ecx
xorl %eax, %eax
/* compare the byte at 0x8000 with that at 0x108000 */
movl $GRUB_BOOT_MACHINE_KERNEL_ADDR, %ebx
pushl %ebx
/* save the original byte in CL */
movb (%ebx), %cl
/* store the value at 0x108000 in AL */
addl $0x100000, %ebx
movb (%ebx), %al
/* try to set one less value at 0x8000 */
popl %ebx
movb %al, %ch
decb %ch
movb %ch, (%ebx)
/* serialize */
outb %al, $0x80
outb %al, $0x80
/* obtain the value at 0x108000 in CH */
pushl %ebx
addl $0x100000, %ebx
movb (%ebx), %ch
/* this result is 1 if A20 is on or 0 if it is off */
subb %ch, %al
xorb $1, %al
/* restore the original */
popl %ebx
movb %cl, (%ebx)
popl %ecx
popl %ebx
ret
LOCAL(reed_solomon_part):
/*
* Support for booting GRUB from a Multiboot boot loader (e.g. GRUB itself).
* This uses the a.out kludge to load raw binary to the area starting at 1MB,
* and relocates itself after loaded.
*/
.p2align 2 /* force 4-byte alignment */
multiboot_header:
/* magic */
.long 0x1BADB002
/* flags */
.long (1 << 16)
/* checksum */
.long -0x1BADB002 - (1 << 16)
/* header addr */
.long multiboot_header - _start + 0x100000 + 0x200
/* load addr */
.long 0x100000
/* load end addr */
.long 0
/* bss end addr */
.long 0
/* entry addr */
.long multiboot_entry - _start + 0x100000 + 0x200
multiboot_entry:
.code32
/* obtain the boot device */
movl 12(%ebx), %edx
movl $GRUB_MEMORY_MACHINE_PROT_STACK, %ebp
movl %ebp, %esp
/* relocate the code */
movl $(LOCAL(decompressor_end) + 0x200), %ecx
addl LOCAL(compressed_size) - _start + 0x100000 + 0x200, %ecx
movl $0x100000, %esi
movl $GRUB_BOOT_MACHINE_KERNEL_ADDR, %edi
cld
rep
movsb
/* jump to the real address */
movl $multiboot_trampoline, %eax
jmp *%eax
multiboot_trampoline:
/* fill the boot information */
movl %edx, LOCAL(boot_dev)
shrl $24, %edx
/* enter the usual booting */
call prot_to_real
.code16
jmp LOCAL (codestart)
.code32
post_reed_solomon:
#ifdef ENABLE_LZMA
movl $GRUB_MEMORY_MACHINE_DECOMPRESSION_ADDR, %edi
movl $LOCAL(decompressor_end), %esi
pushl %edi
movl LOCAL (uncompressed_size), %ecx
leal (%edi, %ecx), %ebx
/* Don't remove this push: it's an argument. */
push %ecx
call _LzmaDecodeA
pop %ecx
/* _LzmaDecodeA clears DF, so no need to run cld */
popl %esi
#endif
movl LOCAL(boot_dev), %edx
movl $prot_to_real, %edi
movl $real_to_prot, %ecx
movl $LOCAL(realidt), %eax
jmp *%esi
#ifdef ENABLE_LZMA
#include "lzma_decode.S"
#endif
.p2align 4
.bss
LOCAL(decompressor_end):
Reference in a new issue View git blame Copy permalink