This patch introduces a new experimental engine-level plugin management
with a new API and command line. Plugins can be distributed via a Docker
registry, and their lifecycle is managed by the engine.
This makes plugins a first-class construct.
For more background, have a look at issue #20363.
Documentation is in a separate commit. If you want to understand how the
new plugin system works, you can start by reading the documentation.
Note: backwards compatibility with existing plugins is maintained,
albeit they won't benefit from the advantages of the new system.
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This is similar to network scopes where a volume can either be `local`
or `global`. A `global` volume is one that exists across the entire
cluster where as a `local` volume exists on a single engine.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This generates an ID string for calls to Mount/Unmount, allowing drivers
to differentiate between two callers of `Mount` and `Unmount`.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When a plugin is first found, it is loaded into the available plugins
even though it's not activated yet.
If activation fails it is taken out of the list.
While it is in the list, other callers may see it and try to check it's
manifest. If it is not fully activated yet, the manifest will be nil and
cause a panic.
This is especially problematic for drivers that are down and have not
been activated yet.
We could just not load the plugin into the available list until it's
fully active, however that will just cause multiple of the same plugin
to attemp to be loaded.
We could check if the manifest is nil and return early (instead of
panicing on a nil manifest), but this will cause a 2nd caller to receive
a response while the first caller is still waiting, which can be
awkward.
This change uses a condition variable to handle activation (instead of
sync.Once). If the plugin is not activated, callers will all wait until
it is activated and receive a broadcast from the condition variable
signaling that it's ok to proceed, in which case we'll check if their
was an error in activation and proceed accordingly.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Use a back-compat struct to handle listing volumes for volumes we know
about (because, presumably, they are being used by a container) for
volume drivers which don't yet support `List`.
Adds a fall-back for the volume driver `Get` call, which will use
`Create` when the driver returns a `404` for `Get`. The old behavior was
to always use `Create` to get a volume reference.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
We don't want to error out when there is a json unmarshal error since
the `old way` will cause this to error.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Makes `docker volume ls` and `docker volume inspect` ask the volume
drivers rather than only using what is cached locally.
Previously in order to use a volume from an external driver, one would
either have to use `docker volume create` or have a container that is
already using that volume for it to be visible to the other volume
API's.
For keeping uniqueness of volume names in the daemon, names are bound to
a driver on a first come first serve basis. If two drivers have a volume
with the same name, the first one is chosen, and a warning is logged
about the second one.
Adds 2 new methods to the plugin API, `List` and `Get`.
If a plugin does not implement these endpoints, a user will not be able
to find the specified volumes as well requests go through the drivers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
- Use the ones provided by docker/go-connections, they are a drop in replacement.
- Remove pkg/sockets from docker.
- Keep pkg/tlsconfig because libnetwork still needs it and there is a
circular dependency issue.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This patches avoids registering (and calling) the same plugin more than
once. Using an helper map which indexes by name guarantees this and keeps
the order.
The behavior of overriding the same name in a flag is consistent with,
for instance, the `docker run -v /test -v /test` flag which register
the volume just once.
Adds integration tests.
Without this patch:
```
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.080901676+01:00" level=debug msg="Calling
GET
/v1.22/info"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.081213202+01:00" level=debug msg="AuthZ
request using plugin docker-novolume-plugin"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.081268132+01:00" level=debug
msg="docker-novolume-plugin implements: authz"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.081699788+01:00" level=debug msg="AuthZ
request using plugin docker-novolume-plugin"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.081762507+01:00" level=debug
msg="docker-novolume-plugin implements: authz"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.082092480+01:00" level=debug msg="GET
/v1.22/info"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.628691038+01:00" level=debug msg="AuthZ
response using plugin docker-novolume-plugin"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.629880930+01:00" level=debug msg="AuthZ
response using plugin docker-novolume-plugin"
```
With this patch:
```
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.376523958+01:00" level=debug msg="Calling
GET
/v1.22/info"
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.376715483+01:00" level=debug msg="AuthZ
request using plugin docker-novolume-plugin"
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.376771230+01:00" level=debug
msg="docker-novolume-plugin implements: authz"
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.377698897+01:00" level=debug msg="GET
/v1.22/info"
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.951016441+01:00" level=debug msg="AuthZ
response using plugin docker-novolume-plugin"
```
Also removes a somehow duplicate debug statement (leaving only the
second one as it's a loop of plugin's manifest):
```
Dec 20 19:52:30 localhost.localdomain docker[25767]:
time="2015-12-20T19:52:30.544090518+01:00" level=debug
msg="docker-novolume-plugin's manifest: &{[authz]}"
Dec 20 19:52:30 localhost.localdomain docker[25767]:
time="2015-12-20T19:52:30.544170677+01:00" level=debug
msg="docker-novolume-plugin implements: authz"
```
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
- fix naming and formatting
- provide more context when erroring auth
- do not capitalize errors
- fix wrong documentation
- remove ugly remoteError{}
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
When user call the `Call()` method, they don't always want to sent
some args or get the return value, so they use `nil` when call `Call()`
method and this will casue an error. It's better to not trying to
encode or decode if it's nil.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
Adds support for the daemon to handle user namespace maps as a
per-daemon setting.
Support for handling uid/gid mapping is added to the builder,
archive/unarchive packages and functions, all graphdrivers (except
Windows), and the test suite is updated to handle user namespace daemon
rootgraph changes.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Allows people to create out-of-process graphdrivers that can be used
with Docker.
Extensions must be started before Docker otherwise Docker will fail to
start.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch makes it such that plugin initialization is synchronized
based on the plugin name and not globally
Signed-off-by: Darren Shepherd <darren@rancher.com>
Check if there is a plugin socket first under `/run/docker/plugins/NAME.sock`.
If there is no socket for a plugin, check `/etc/docker/plugins/NAME.spec` and
`/usr/lib/docker/plugins/NAME.spec` for spec files.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed by all authors:
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Jeff Lindsay <progrium@gmail.com>
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Signed-off-by: Luke Marsden <luke@clusterhq.com>
Signed-off-by: David Calavera <david.calavera@gmail.com>
