The use of the pathMapper is no longer needed the way we have organized the
code base. The extra level of indirection has proved unnecessary and confusing
so we've opted to clean it up. In the future, we may require more flexibility,
but now it is simply not required.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Unfortunately, the 2.1 releease has written manfiest links into the wrong
directory. This doesn't affect new 2.1 deployments but fixing this to be 2.0
backwards compatible has broken 2.1.0 compatibility. To ensure we have
compatibility between 2.0, 2.1.0 and future releases, we now check one of
several locations to identify a manifest link.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Unfortunately, the refactor used the incorrect path for manifest links within a
repository. While this didn't stop the registry from working, it did break
compatibility with 2.0 deployments for manifest fetches.
Tests were added to ensure these are locked down to the appropriate paths.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The example configuration files add X-Content-Type-Options: nosniff.
Add coverage in existing registry/handlers unit tests.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
distribution errors. Fill in missing checks for mutations on a registry pull-through
cache. Add unit tests and update documentation.
Also, give v2.ErrorCodeUnsupported an HTTP status code, previously it was
defaulting to 500, now its 405 Method Not Allowed.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Several error codes are generally useful but tied to the v2 specification
definitions. This change moves these error code definitions into the common
package for use by the health package, which is not tied to the v2 API.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
To ensure the ensure the web application is properly operating, we've added a
periodic health check for the storage driver. If the health check fails three
times in a row, the registry will serve 503 response status for any request
until the condition is resolved. The condition is reported in the response body
and via the /debug/health endpoint.
To ensure that all drivers will properly operate with this health check, a
function has been added to the driver testsuite.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
When using the RADOS driver, the hierarchy of the files is stored
in OMAPs, but the root OMAP was not created and a call to List("/")
was returning an error instead of returned the first level files
stored. This patches creates an OMAP for "/" and excludes the listed
directory from the list of files returned.
Signed-off-by: Vincent Giersch <vincent@giersch.fr>
Instead, provide a variant of instrumentedResponseWriter that does not
implement CloseNotifier, and use that when necessary. In
copyFullPayload, log instead of panicing when we encounter something
that doesn't implement CloseNotifier.
This is more complicated than I'd like, but it's necessary because
instrumentedResponseWriter must not embed CloseNotifier unless there's
really a CloseNotifier to embed.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This patch splits LookupEndpoints into LookupPullEndpoints and
LookupPushEndpoints so that mirrors added with --registry-mirror are
skipped in the list returned by LookupPushEndpoints.
Fixes https://github.com/docker/distribution/issues/823
Signed-off-by: Tibor Vass <tibor@docker.com>
with a new `proxy` section in the configuration file.
Create a new registry type which delegates storage to a proxyBlobStore
and proxyManifestStore. These stores will pull through data if not present
locally. proxyBlobStore takes care not to write duplicate data to disk.
Add a scheduler to cleanup expired content. The scheduler runs as a background
goroutine. When a blob or manifest is pulled through from the remote registry,
an entry is added to the scheduler with a TTL. When the TTL expires the
scheduler calls a pre-specified function to remove the fetched resource.
Add token authentication to the registry middleware. Get a token at startup
and preload the credential store with the username and password supplied in the
config file.
Allow resumable digest functionality to be disabled at runtime and disable
it when the registry is a pull through cache.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
registry/storage/blob_test.go:149: arg d for printf verb %s of wrong type: github.com/docker/distribution.Descriptor
Signed-off-by: Doug Davis <dug@us.ibm.com>
The response code isn't actually sent to the client, because the
connection has already closed by this point. But it causes the status
code to appear as 499 in the logs instead of 0.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
When a client disconnects without completing a HTTP request, we were
attempting to process the partial request, which usually leads to a 400
error. These errors can pollute the logs and make it more difficult to
track down real bugs.
This change uses CloseNotifier to detect disconnects. In combination
with checking Content-Length, we can detect a disconnect before sending
the full payload, and avoid logging a 400 error.
This logic is only applied to PUT, POST, and PATCH endpoints, as these
are the places where disconnects during a request are most likely to
happen.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Some structures use int for sizes and UNIX timestamps. On some
platforms, int is 32 bits, so this can lead to the year 2038 issues and
overflows when dealing with large containers or layers.
Consistently use int64 to store sizes and UNIX timestamps in
api/types/types.go. Update related to code accordingly (i.e.
strconv.FormatInt instead of strconv.Itoa).
Use int64 in progressreader package to avoid integer overflow when
dealing with large quantities. Update related code accordingly.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This patch fixes a bug where a user specifies a v1 mirror for
--registry-mirror and pull an image from the Hub.
It used to not fallback because of an unexpected error returned when
trying to JSON marshal nginx output.
We now ensure that any unexpected error falls back to the next endpoint
in the list.
Signed-off-by: Tibor Vass <tibor@docker.com>
includes the http response.
When debugging non-successful registry requests this will place
the error details and http status fields in the same log line
giving easier visibility to what error occured in the request.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Log a warning if the registry generates its own secret.
Update configuration doc, and remove the default secret from the
development config file.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This passed in the #744 before merge, but apparently the test changed
since the PR was created in ways that led to a new failures.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Currently login and search do not load per registry certificates.
This is a regression caused by the last refactor since this was recently fixed.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Storage drivers can implement a method called URLFor which can return a direct
url for a given path. The functionality allows the registry to direct clients
to download content directly from the backend storage. This is commonly used
with s3 and cloudfront. Under certain conditions, such as when the registry is
not local to the backend, these redirects can hurt performance and waste
incoming bandwidth on pulls. This feature addition allows one to disable this
feature, if required.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Conflicts:
configuration/configuration.go
registry/handlers/app.go
registry/storage/catalog_test.go
registry/storage/manifeststore_test.go
registry/storage/registry.go
Add a trusted flag to force the cli to resolve a tag into a digest via the notary trust library and pull by digest.
On push the flag the trust flag will indicate the digest and size of a manifest should be signed and push to a notary server.
If a tag is given, the cli will resolve the tag into a digest and pull by digest.
After pulling, if a tag is given the cli makes a request to tag the image.
Use certificate directory for notary requests
Read certificates using same logic used by daemon for registry requests.
Catch JSON syntax errors from Notary client
When an uncaught error occurs in Notary it may show up in Docker as a JSON syntax error, causing a confusing error message to the user.
Provide a generic error when a JSON syntax error occurs.
Catch expiration errors and wrap in additional context.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
* Add godoc documentation where it was missing
* Change identifier names that don't match Go style, such as INDEX_NAME
* Rename RegistryInfo to PingResult, which more accurately describes
what this structure is for. It also has the benefit of making the name
not stutter if used outside the package.
Updates #14756
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Implement the delete API by implementing soft delete for layers
and blobs by removing link files and updating the blob descriptor
cache. Deletion is configurable - if it is disabled API calls
will return an unsupported error.
We invalidate the blob descriptor cache by changing the linkedBlobStore's
blobStatter to a blobDescriptorService and naming it blobAccessController.
Delete() is added throughout the relevant API to support this functionality.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Because the logger was incorrectly replaced while adding hooks, log output did
not include the version and instance ids. The main issue was the the
logrus.Entry was replaced with the logger, which included no context. Replacing
the logger on the context is not necessary when configuring hooks since we are
configuring the contexts logger directly.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This removes the erroneous http.Handler interface in favor a simple SetHeaders
method that only operattes on the response. Several unnecessary uses of pointer
types were also fixed up.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
Some missing descriptions and error code for tags pagination was cleaned up to
ensure clarity. Specifically, we ensure the request variations are named and
the proper error codes are included.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The way Repositories() was initially called was somewhat different than
other parts of the client bindings because there was no way to instantiate a
Namespace. This change implements a NewRegistry() function which changes
it so that Repositories() can be called the way one would expect.
It doesn't implement any of the other functions of Namespaces.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
This change removes the Catalog Service and replaces it with a more
simplistic Repositories() method for obtaining a catalog of all
repositories. The Repositories method takes a pre-allocated slice
and fills it up to the size of the slice and returns the amount
filled. The catalog is returned lexicographically and will start
being filled from the last entry passed to Repositories(). If there
are no more entries to fill, io.EOF will be returned.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
Conflicts:
registry/client/repository.go
registry/handlers/api_test.go
This change adds a basic catalog endpoint to the API, which returns a list,
or partial list, of all of the repositories contained in the registry. Calls
to this endpoint are somewhat expensive, as every call requires walking a
large part of the registry.
Instead, to maintain a list of repositories, you would first call the catalog
endpoint to get an initial list, and then use the events API to maintain
any future repositories.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
Move the specification to use a Link header, rather than a "next" entry in the
json results. This prevents requiring clients from parsing the request body to
issue the next request. It also ensures that the returned response body does
not change in between requests.
The ordering of the specification has been slightly tweaked, as well. Listing
image tags has been moved after the catalog specification. Tag pagination now
heavily references catalog pagination.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This contains a proposal for a catalog API, provided access to the internal
contents of a registry instance. The API endpoint is prefixed with an
underscore, which is illegal in images names, to prevent collisions with
repositories names. To avoid issues with large result sets, a paginated version
of the API is proposed. We make an addition to the tags API to support
pagination to ensure the specification is conistent.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
If a registry mirror is using TLS, ensure that certs for it
are picked up from /etc/docker/certs.d
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
The only uses of RequestAuthorization and its associated functions were
removed in 7fed379d95 ("Update graph to
use vendored distribution client for the v2 codepath")
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
- fully capitalize HTTP in HTTPHeaders
- comment for CONFIGFILE
- camelcase and privatize oldConfigfile, defaultIndexserver
- remove unused var errConfigFileMissing
- comments for methods and functions throughout
- external references to renamed variables changed
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
After consideration, we've changed the main descriptor field name to for number
of bytes to "size" to match convention. While this may be a subjective
argument, commonly we refer to files by their "size" rather than their
"length". This will match other conventions, like `(FileInfo).Size()` and
methods on `io.SizeReaderAt`. Under more broad analysis, this argument doesn't
necessarily hold up. If anything, "size" is shorter than "length".
Signed-off-by: Stephen J Day <stephen.day@docker.com>
An error level log is already produced within app.authorized() if an
actual unexpected error occurs during authorization, so this warning
level log remains for auditability purposes, but should not be
considered an error condition.
Addresses #704
Signed-off-by: Brian Bland <brian.bland@docker.com>
This changeset provides a common http handler for serving errcodes. This should
unify http responses across webservices in the face of errors.
Several type assertions have been added, as well, to ensure the error interface
is implemented.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Currently canonical name gets set to the local name and displayed in the errors.
Canonical name should be the unique and canonical name for an image.
Use docker.io as the canonical domain for images on the public registry.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Add a functional argument to pass a digest to (ManifestService).GetByTag().
If the digest matches an empty manifest and nil error are returned.
See 6bedf7d1cd for server implementation.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
The docker/distribution dependency was updated in the previous commit to allow
repository name components to only consist of a single letter. The unit tests
have been updated to cement this change.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The main goal of this changeset is to allow repository name components to
consist of a single character. The number of components allowed and the slash
separation requirements have also been clarified.
To go along with this simplification, errant constants and unneeded error types
have been removed.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
By adding this header AuthTransport will add Basic authentication to the request and allow 'docker search' results to include private images.
Signed-off-by: Matt Moore <mattmoor@google.com>
Challenger manager interface is used to handle getting authorization challenges from an endpoint as well as extracting challenges from responses.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Replace ping logic with individual functions to extract API version and authorization challenges. The response from a ping operation can be passed into these function. If an error occurs in parsing, the version or challenge will not be used. Sending the ping request is the responsibility of the caller.
APIVersion has been converted from a string to a structure type. A parse function was added to convert from string to the structure type.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Move client auth into a separate package.
Separate ping from the authorizer and export Challenges type.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Timeouts should not be a discrete period of time, because they end
up being arbitrary and may be difficult to gauge correctly against
very large Docker layers. Rather, timeouts should be set at the
transport level using the SetDeadline attribute on a net.Conn
object.
Signed-off-by: Jon Poler <jonathan.poler@apcera.com>
This removes documentation and code related to IPC based storage driver
plugins. The existence of this functionality was an original feature goal but
is now not maintained and actively confusing incoming contributions. We will
likely explore some driver plugin mechanism in the future but we don't need
this laying around in the meantime.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The registry client's TLS configuration used the
default cipher list, including RC4. This change
copies the default cipher list from Golang 1.4 and
removes RC4 from that list. RC4 ciphers are considered
weak and vulnerable to a number of attacks.
Uses the tlsconfig package to define allowed ciphers.
Signed-off-by: Eric Windisch <eric@windisch.us>
Today, endpoints implementing v2 cannot properly fallback to v1 because the underlying transport that deals with authentication (Basic / Token) doesn't get annotated.
This doesn't affect DockerHub because the DockerHub endpoint appears as 'https://index.docker.io/v1/' (in .dockercfg), and the 'v1' tricks this logic just long enough that the transport is always annotated for DockerHub accesses.
Signed-off-by: Matt Moore <mattmoor@google.com>
See: d796729b6b/registry/handlers/app.go (L498)
Per the comment on line 498, this moves the logic of setting the http
status code into the serveJSON func, leaving the auth.Challenge.ServeHTTP()
func to just set the auth challenge header.
Signed-off-by: Doug Davis <dug@us.ibm.com>
This ensures that rados is not required when building the registry. This was
slightly tricky in that when the flags were applied, the rados package was
completely missing. This led to a problem where rados was basically unlistable
and untestable as a package. This was fixed by simply adding a doc.go file that
is included whether rados is built or not.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This change refreshes the updated version of Azure SDK
for Go that has the latest changes.
I manually vendored the new SDK (github.com/Azure/azure-sdk-for-go)
and I removed `management/` `core/` packages manually simply because
they're not used here and they have a fork of `net/http` and `crypto/tls`
for a particular reason. It was introducing a 44k SLOC change otherwise...
This also undoes the `include_azure` flag (actually Steven removed the
driver from imports but forgot to add the build flag apparently, so the
flag wasn't really including azure. 😄 ). This also must be obsolete
now.
Fixes#620, #175.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
After consideration, the basic authentication implementation has been
simplified to only support bcrypt entries in an htpasswd file. This greatly
increases the security of the implementation by reducing the possibility of
timing attacks and other problems trying to detect the password hash type.
Also, the htpasswd file is only parsed at startup, ensuring that the file can
be edited and not effect ongoing requests. Newly added passwords take effect on
restart. Subsequently, password hash entries are now stored in a map.
Test cases have been modified accordingly.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This change refactors the basic authentication implementation to better follow
Go coding standards. Many types are no longer exported. The parser is now a
separate function from the authentication code. The standard functions
(*http.Request).BasicAuth/SetBasicAuth are now used where appropriate.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This patch ensures no auth headers are set for v1 registries if there
was a 302 redirect.
This also ensures v2 does not use authTransport.
Signed-off-by: Tibor Vass <tibor@docker.com>
In the request parameters lists `tag` was used instead of
`reference` present in the HTTP requests paths
Signed-off-by: Vincent Giersch <vincent.giersch@ovh.net>
Refactoring in Docker 1.7 changed the behavior to add this header where as Docker <= 1.6 wouldn't emit this Header on a HTTP 302 redirect.
This closes#13649
Signed-off-by: Jeffrey van Gogh <jvg@google.com>
It should not print to STDOUT so that it only prints the debugTransport
output if there was an error in one of the registry tests.
Signed-off-by: Tibor Vass <tibor@docker.com>
This PR is for issue of "email after registry webapp panic" #41, improving my
previous design (closed).
It use self setting up hooks, to catch panic in web application.
And, send email in hooks handle directly, to no use new http server and
handler.
Signed-off-by: xiekeyang <keyangxie@126.com>
To ensure manifest integrity when pulling by digest, this changeset ensures
that not only the remote digest provided by the registry is verified but also
that the digest provided on the command line is checked, as well. If this check
fails, the pull is cancelled as with an error. Inspection also should that
while layers were being verified against their digests, the error was being
treated as tech preview image signing verification error. This, in fact, is not
a tech preview and opens up the docker daemon to man in the middle attacks that
can be avoided with the v2 registry protocol.
As a matter of cleanliness, the digest package from the distribution project
has been updated to latest version. There were some recent improvements in the
digest package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The v2 registry will act as a pull-through cache, and needs to be
handled differently by the client to the v1 registry mirror.
See docker/distribution#459 for details
Configuration
Only one v2 registry can be configured as a mirror. Acceptable configurations
in this chanage are: 0...n v1 mirrors or 1 v2 mirror. A mixture of v1 and v2
mirrors is considered an error.
Pull
If a v2 mirror is configured, all pulls are redirected to that mirror. The
mirror will serve the content locally or attempt a pull from the upstream mirror,
cache it locally, and then serve to the client.
Push
If an image is tagged to a mirror, it will be pushed to the mirror and be
stored locally there. Otherwise, images are pushed to the hub. This is
unchanged behavior.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
To make the definition of supported digests more clear, we have refactored the
digest package to have a special Algorithm type. This represents the digest's
prefix and we associated various supported hash implementations through
function calls.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The change relies on a refactor of the upstream resumable sha256/sha512 package
that opts to register implementations with the standard library. This allows
the resumable support to be detected where it matters, avoiding unnecessary and
complex code. It also ensures that consumers of the digest package don't need
to depend on the forked sha implementations.
We also get an optimization with this change. If the size of data written to a
digester is the same as the file size, we check to see if the digest has been
verified. This works if the blob is written and committed in a single request.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Ensure that clients can use the blob descriptor cache provider without needing
the redis package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Changes behavior so ping doesn't happen if /v2/ is anywhere in a request path, but instead only at the beginning. This fixes attempts to ping on redirected URLs.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
The transport package no longer requires importing distribution for the ReadSeekCloser, instead declares its own.
Added comments on the Authenication handler in session.
Added todo on http seek reader to highlight its lack of belonging to the client transport.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Add check for unauthorized error code and explicitly set the error code if the content could not be parsed.
Updated repository test for unauthorized tests and nit feedback.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Each type no longer requires holding a reference to repository.
Added implementation for signatures get.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Update comments and TODOs
Fix switch style
Updated parse http response to take in reader
Add Cancel implementation
Update blobstore variable name
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This driver implements the storagedriver.StorageDriver interface and
uses Ceph Object Storage as storage backend.
Since RADOS is an object storage and no hierarchy notion, the
following convention is used to keep the filesystem notions stored in
this backend:
* All the objects data are stored with opaque UUID names prefixed
(e.g. "blob:d3d232ff-ab3a-4046-9ab7-930228d4c164).
* All the hierarchy information are stored in rados omaps, where the
omap object identifier is the virtual directory name, the keys in
a specific are the relative filenames and the values the blob
object identifier (or empty value for a sub directory).
e.g. For the following hierarchy:
/directory1
/directory1/object1
/directory1/object2
/directory1/directory2/object3
The omap "/directory1" will contains the following key / values:
- "object1" "blob:d3d232ff-ab3a-4046-9ab7-930228d4c164"
- "object2" "blob:db2e359d-4af0-4bfb-ba1d-d2fd029866a0"
- "directory2" ""
The omap "/directory1/directory2" will contains:
- "object3" "blob:9ae2371c-81fc-4945-80ac-8bf7f566a5d9"
* The MOVE is implemented by changing the reference to a specific
blob in its parent virtual directory omap.
This driver stripes rados objects to a fixed size (e.g. 4M). The idea
is to keep small objects (as done by RBD on the top of RADOS) that
will be easily synchronized accross OSDs. The information of the
original object (i.e total size of the chunks) is stored as a Xattr
in the first chunk object.
Signed-off-by: Vincent Giersch <vincent.giersch@ovh.net>
This patch removes the need for requestFactories and decorators
by implementing http.RoundTripper transports instead.
It refactors some challenging-to-read code.
NewSession now takes an *http.Client that can already have a
custom Transport, it will add its own auth transport by wrapping
it.
The idea is that callers of http.Client should not bother
setting custom headers for every handler but instead it should
be transparent to the callers of a same context.
This patch is needed for future refactorings of registry,
namely refactoring of the v1 client code.
Signed-off-by: Tibor Vass <tibor@docker.com>
Repository creation now just takes in an http.RoundTripper. Authenticated requests or requests which require additional headers should use the NewTransport function along with a request modifier (such an an authentication handler).
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Wrapping the reader in a NopCloser is necessary to prevent the http library from closing the input reader.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Refactory authorizer to take a set of authentication handlers for different authentication schemes returned by an unauthorized HTTP requst.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Adds functionality to create a Repository client which connects to a remote endpoint.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This PR refactors the blob service API to be oriented around blob descriptors.
Identified by digests, blobs become an abstract entity that can be read and
written using a descriptor as a handle. This allows blobs to take many forms,
such as a ReadSeekCloser or a simple byte buffer, allowing blob oriented
operations to better integrate with blob agnostic APIs (such as the `io`
package). The error definitions are now better organized to reflect conditions
that can only be seen when interacting with the blob API.
The main benefit of this is to separate the much smaller metadata from large
file storage. Many benefits also follow from this. Reading and writing has
been separated into discrete services. Backend implementation is also
simplified, by reducing the amount of metadata that needs to be picked up to
simply serve a read. This also improves cacheability.
"Opening" a blob simply consists of an access check (Stat) and a path
calculation. Caching is greatly simplified and we've made the mapping of
provisional to canonical hashes a first-class concept. BlobDescriptorService
and BlobProvider can be combined in different ways to achieve varying effects.
Recommend Review Approach
-------------------------
This is a very large patch. While apologies are in order, we are getting a
considerable amount of refactoring. Most changes follow from the changes to
the root package (distribution), so start there. From there, the main changes
are in storage. Looking at (*repository).Blobs will help to understand the how
the linkedBlobStore is wired. One can explore the internals within and also
branch out into understanding the changes to the caching layer. Following the
descriptions below will also help to guide you.
To reduce the chances for regressions, it was critical that major changes to
unit tests were avoided. Where possible, they are left untouched and where
not, the spirit is hopefully captured. Pay particular attention to where
behavior may have changed.
Storage
-------
The primary changes to the `storage` package, other than the interface
updates, were to merge the layerstore and blobstore. Blob access is now
layered even further. The first layer, blobStore, exposes a global
`BlobStatter` and `BlobProvider`. Operations here provide a fast path for most
read operations that don't take access control into account. The
`linkedBlobStore` layers on top of the `blobStore`, providing repository-
scoped blob link management in the backend. The `linkedBlobStore` implements
the full `BlobStore` suite, providing access-controlled, repository-local blob
writers. The abstraction between the two is slightly broken in that
`linkedBlobStore` is the only channel under which one can write into the global
blob store. The `linkedBlobStore` also provides flexibility in that it can act
over different link sets depending on configuration. This allows us to use the
same code for signature links, manifest links and blob links. Eventually, we
will fully consolidate this storage.
The improved cache flow comes from the `linkedBlobStatter` component
of `linkedBlobStore`. Using a `cachedBlobStatter`, these combine together to
provide a simple cache hierarchy that should streamline access checks on read
and write operations, or at least provide a single path to optimize. The
metrics have been changed in a slightly incompatible way since the former
operations, Fetch and Exists, are no longer relevant.
The fileWriter and fileReader have been slightly modified to support the rest
of the changes. The most interesting is the removal of the `Stat` call from
`newFileReader`. This was the source of unnecessary round trips that were only
present to look up the size of the resulting reader. Now, one must simply pass
in the size, requiring the caller to decide whether or not the `Stat` call is
appropriate. In several cases, it turned out the caller already had the size
already. The `WriterAt` implementation has been removed from `fileWriter`,
since it is no longer required for `BlobWriter`, reducing the number of paths
which writes may take.
Cache
-----
Unfortunately, the `cache` package required a near full rewrite. It was pretty
mechanical in that the cache is oriented around the `BlobDescriptorService`
slightly modified to include the ability to set the values for individual
digests. While the implementation is oriented towards caching, it can act as a
primary store. Provisions are in place to have repository local metadata, in
addition to global metadata. Fallback is implemented as a part of the storage
package to maintain this flexibility.
One unfortunate side-effect is that caching is now repository-scoped, rather
than global. This should have little effect on performance but may increase
memory usage.
Handlers
--------
The `handlers` package has been updated to leverage the new API. For the most
part, the changes are superficial or mechanical based on the API changes. This
did expose a bug in the handling of provisional vs canonical digests that was
fixed in the unit tests.
Configuration
-------------
One user-facing change has been made to the configuration and is updated in
the associated documentation. The `layerinfo` cache parameter has been
deprecated by the `blobdescriptor` cache parameter. Both are equivalent and
configuration files should be backward compatible.
Notifications
-------------
Changes the `notification` package are simply to support the interface
changes.
Context
-------
A small change has been made to the tracing log-level. Traces have been moved
from "info" to "debug" level to reduce output when not needed.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
- Set an Etag header
- Check If-None-Match and respond appropriately
- Set a Cache-Control header with a default of 1 week
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Allow to use a unix socket as a listener.
To specify an endpoint type we use an optional configuration
field 'net', as there's no way to distinguish a relative
socket path from a hostname.
Signed-off-by: Anton Tiurin <noxiouz@yandex.ru>
- Ensures new uploads and resumed upload statuses always return an offset of 0. This allows future clients which support resumable upload to not attempt resumable upload on this version which does not support it.
- Add PATCH support for streaming data on upload.
- Add messaging to specification that PATCH with content range is currently not supported.
- Update PUT blob to only support full data or no data, no more last chunk messaging as it was not supported.
closes#470
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This deals with a memory leak, caused by goroutines, experienced when using the
s3 driver. Unfortunately, this section of the code leaks goroutines like a
sieve. There is probably some refactoring that could be done to avoid this but
instead, we have a done channel that will cause waiting goroutines to exit.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
- Change driver interface to take a context as its first argument
- Make newFileReader take a context as its first argument
- Make newFileWriter take a context as its first argument
- Make blobstore exists and delete take a context as a first argument
- Pass the layerreader's context to the storage layer
- Pass the app's context to purgeuploads
- Store the app's context into the blobstore (was previously null)
- Pass the trace'd context to the storage drivers
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
According to the Apache mod_proxy docs, X-Forwarded-Host can be a
comma-separated list of hosts, to which each proxy appends the requested
host. We want to grab only the first from this comma-separated list
to get the original requested Host when building URLs.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
This adds a missing return statement. It is not strictly needed since if the
io.Copy fails, the Finish operation will fail. Currently, the client reports
both errors where this new code will correctly only report the io.Copy error.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The code using values from the yaml package wasn't careful enought with the
possible incoming types. Turns out, it is just an int but we've made this
section somewhat bulletproof in case that package changes the behavior.
This code likely never worked. The configuration system should be decoupled
from the object instantiation.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Rather than accept the resulting of a layer validation, we retry up to three
times, backing off 100ms after each try. The thought is that we allow s3 files
to make their way into the correct location increasing the liklihood the
verification can proceed, if possible.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Thanks to @dmcgowan for noticing.
Added a testcase to make sure Save() can create the dir and then
read from it.
Signed-off-by: Doug Davis <dug@us.ibm.com>
This PR does the following:
- migrated ~/.dockerfg to ~/.docker/config.json. The data is migrated
but the old file remains in case its needed
- moves the auth json in that fie into an "auth" property so we can add new
top-level properties w/o messing with the auth stuff
- adds support for an HttpHeaders property in ~/.docker/config.json
which adds these http headers to all msgs from the cli
In a follow-on PR I'll move the config file process out from under
"registry" since it not specific to that any more. I didn't do it here
because I wanted the diff to be smaller so people can make sure I didn't
break/miss any auth code during my edits.
Signed-off-by: Doug Davis <dug@us.ibm.com>
When the registry starts a background timer will periodically
scan the upload directories on the file system every 24 hours
and delete any files older than 1 week. An initial jitter
intends to avoid contention on the filesystem where multiple
registries with the same storage driver are started
simultaneously.
Ensure that the status is logged in the context by instantiating before the
request is routed to handlers. While this requires some level of hacking to
acheive, the result is that the context value of "http.request.status" is as
accurate as possible for each request.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Registry is intended to be used as a repository service than an abstract collection of repositories. Namespace better describes a collection of repositories retrievable by name.
The registry service serves any repository in the global scope.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This moves the instance id out of the app so that it is associated with an
instantiation of the runtime. The instance id is stored on the background
context. This allows allow contexts using the main background context to
include an instance id for log messages. It also simplifies the application
slightly.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The original implementation wrote to different locations in a shared slice.
While this is theoretically okay, we end up thrashing the cpu cache since
multiple slice members may be on the same cache line. So, even though each
thread has its own memory location, there may be contention over the cache
line. This changes the code to aggregate to a slice in a single goroutine.
In reality, this change likely won't have any performance impact. The theory
proposed above hasn't really even been tested. Either way, we can consider it
and possibly go forward.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Rather than enforce lowercase paths for all drivers, support for
case-sensitivity has been deferred to the driver. There are a few caveats to
this approach:
1. There are possible security implications for tags that only differ in their
case. For instance, a tag "A" may be equivalent to tag "a" on certain file
system backends.
2. All system paths should not use case-sensitive identifiers where possible.
This might be problematic in a blob store that uses case-sensitive ids. For
now, since digest hex ids are all case-insensitive, this will not be an issue.
The recommend workaround is to not run the registry on a case-insensitive
filesystem driver in security sensitive applications.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
To avoid compounded round trips leading to slow retrieval of manifests with a
large number of signatures, the fetch of signatures has been parallelized. This
simply spawns a goroutine for each path, coordinated with a sync.WaitGroup.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
registry/SearchResults was missing the "is_automated" field.
I added it back in.
Pull this 'table' removal one from the others because it fixed
a bug too
Signed-off-by: Doug Davis <dug@us.ibm.com>
For consistency with other systems, the redis and caching monitoring data has
been moved under the "registry" section in expvar. This ensures the entire
registry state is kept to a single section.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This allows one to better control the usage of the cache and turn it off
completely. The storage configuration module was modified to allow parameters
to be passed to just the storage implementation, rather than to the driver.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changeset integrates the layer info cache with the registry webapp and
storage backend. The main benefit is to cache immutable layer meta data,
reducing backend roundtrips. The cache can be configured to use either redis or
an inmemory cache.
This provides massive performance benefits for HEAD http checks on layer blobs
and manifest verification.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changeset defines the interface for layer info caches. Layer info caches
speed up access to layer meta data accessed in storage driver backends. The
two main operations are tests for repository membership and resolving path and
size information for backend blobs.
Two implementations are available. The main implementation leverages redis to
store layer info. An alternative implementation simply caches layer info in
maps, which should speed up resolution for less sophisticated implementations.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
By using a resumable digester and storing the state of upload digests between
subsequent upload chunks, finalizing an upload no longer requires reading back
all of the uploaded data to verify the client's expected digest.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
This chnage prevents a crash when moving from a non-existent directory that has
a file as a parent. To prevent this, we simply check that the node is a
directory and throws an error if it is not.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This change adds strong validation for the uuid variable for v2 routes. This is
a minor specification change but is okay since the uuid field is controlled by
the server. The character set is restricted to avoid path traversal, allowing
for alphanumeric values and urlsafe base64 encoding.
This change has no effect on client implementations.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Redis has been integrated with the web application for use with various
services. The configuraiton exposes connection details, timeouts and pool
parameters. Documentation has been updated accordingly.
A few convenience methods have been added to the context package to get loggers
with certain fields, exposing some missing functionality from logrus.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This makes `registry.Service` a first class type and does not use jobs
to interact with this type.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Update registry package to use the v2 registry api from distribution. Update interfaces to directly take in digests.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This enables Azure storage driver to be used with non-default
cloud endpoints like Azure China or Azure Government that does
not use `.blob.core.windows.net` FQDN suffix.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
No longer add the body to the error when a 404 is received on get repository data.
closes#11510
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Pushing a v2 image layer has two steps:
- POST to get a new upload URL
- PUT to that upload URL
We were previously not checking the response code of
the POST request and the PUT would fail in weird ways.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Currently the http clients used by auth use the default tls config. The config needs to be updated to only support TLS1.0 and newer as well as respect registry insecure configuration.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
When docker push get response with unknown HTTP status, docker daemon
print:
"Error: Status XXX trying to push repository XXX: XXX"
But when docker pull meets response with unknown status code, it gives:
"HTTP code: XXX"
This commit helps docker pull print more detailed error info like push
does, so push and pull can behave consistently when error happens.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Add ability to refer to an image by repository name and digest using the
format repository@digest. Works for pull, push, run, build, and rmi.
Signed-off-by: Andy Goldstein <agoldste@redhat.com>
Currently when registry error strings contain new line characters only the last line is displayed to the client. Quote the string to ensure the client can see the entire body value.
fixes#11346
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Currently when the registry ping is sent, it creates the request directly from http.NewRequest instead of from the http request factory. The request factory adds useful header information such as user agent which is needed by the registry.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Convert middleware in the config to be a map of type->[]Middleware
Add support for registry & repository middleware.
Some naming updates as well.
Signed-off-by: Andy Goldstein <agoldste@redhat.com>
middleware concept.
This also breaks the dependency the storage package had on goamz
Signed-off-by: David Lawrence <david.lawrence@docker.com> (github: endophage)
Private registries should support having images pushed with only a single name component (e.g. localhost:5000/myapp).
The public registry currently requires two name components, but this is already enforced in the registry code.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This changeset implements immutable manifest references via the HTTP API. Most
of the changes follow from modifications to ManifestService. Once updates were
made across the repo to implement these changes, the http handlers were change
accordingly. The new methods on ManifestService will be broken out into a
tagging service in a later PR.
Unfortunately, due to complexities around managing the manifest tag index in an
eventually consistent manner, direct deletes of manifests have been disabled.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Manifests are now fetched by a field called "reference", which may be a tag or
a digest. When using digests to reference a manifest, the data is immutable.
The routes and specification have been updated to allow this.
There are a few caveats to this approach:
1. It may be problematic to rely on data format to differentiate between a tag
and a digest. Currently, they are disjoint but there may modifications on
either side that break this guarantee.
2. The caching characteristics of returned content are very different for
digest versus tag-based references. Digest urls can be cached forever while tag
urls cannot.
Both of these are minimal caveats that we can live with in the future.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Add a SignatureService and expose it via Signatures() on Repository so
external integrations wrapping the registry can access signatures.
Move signature related code from revisionstore.go to signaturestore.go.
Signed-off-by: Andy Goldstein <agoldste@redhat.com>
benchmarks added to filewriter_test, demonstrate buffered
version is ~5x faster on my hardware.
Signed-off-by: David Lawrence <david.lawrence@docker.com> (github: endophage)
This changeset adds support for a header to identify docker upload uuids. This
id can be used as a key to manage local state for resumable uploads. The goal
is remove the necessity for a client to parse the url to get an upload uuid.
The restrictions for clients to use the location header are still strongly in
place.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The method (Registry).Repository may now return an error. This is too allow
certain implementationt to validate the name or opt to not return a repository
under certain conditions.
In conjunction with this change, error declarations have been moved into a
single file in the distribution package. Several error declarations that had
remained in the storage package have been moved into distribution, as well. The
declarations for Layer and LayerUpload have also been moved into the main
registry file, as a result.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Since the notifications package is now decoupled from storage, we are moving it
to the root package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
A Layer or LayerUpload should not be coupled with the containing repository.
Remove the Name method and correctly reference from the repository where
appropriate.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
After consideration, it has been decided that the interfaces defined in the
storage package provide a good base for interacting with various registry
instances. Whether interacting with a remote API or a local, on-disk registry,
these types have proved flexible. By moving them here, they can become the
central components of interacting with distribution components.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
After all of the perl refactoring, some import orderings were left asunder.
This commit corrects that.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This change is slightly more complex than previous package maves in that the
package name changed. To address this, we simply always reference the package
driver as storagedriver to avoid compatbility issues with existing code. While
unfortunate, this can be cleaned up over time.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The goal is to free up the distribution/registry package to include common
registry types. This moves the webapp definitions out of the way to allow for
this change in the future.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The branch that executes after a failed request authorization due to a missing
repo name now correctly returns an error. This is somewhat superficial since
the response would have already been executed. Although, unintended repository
operations may have occurred.
Documentations and comments have also been updated to be in line with
surrounding changes.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changeset integrates context with the storage package. Debug messages have
been added to exported methods. Existing log messages will now include
contextual details through logger fields to aid in debugging. This integration
focuses on logging and may be followed up with a metric-oriented change in the
future.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changeset integrates contextual logging into the registry web application.
Idiomatic context use is attempted within the current webapp layout. The
functionality is centered around making lifecycle objects (application and
request context) into contexts themselves. Relevant data has been moved into
the context where appropriate. We still have some work to do to factor out the
registry.Context object and the dispatching functionality to remove some
awkward portions.
The api tests were slightly refactored to use a test environment to eliminate
common code.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The auth package has been updated to use "golang.org/x/net/context" for
passing information between the application and the auth backend.
AccessControllers should now set a "auth.user" context value to a AuthUser
struct containing a single "Name" field for now with possible, optional, values
in the future.
The "silly" auth backend always sets the name to "silly", while the "token" auth
backend will set the name to match the "subject" claim of the JWT.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
This modifies the "docker help" text so that it is no wider than 80 chars
and each description fits on one line. This will also try to use ~ when
possible
Added a test to make sure we don't go over 80 chars again.
Added a test to make sure we use ~
Applied rules/tests to all docker commands - not just main help text
Closes#10214
Signed-off-by: Doug Davis <dug@us.ibm.com>
To clarify the role of actor, the request data that initiates an event has been
separated. The ActorRecord is pared down to just the username. This eliminates
confusion about where event related data should be added.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Endpoints are now created at applications startup time, using notification
configuration. The instances are then added to a Broadcaster instance, which
becomes the main event sink for the application. At request time, an event
bridge is configured to listen to repository method calls. The actor and source
of the eventBridge are created from the requeest context and application,
respectively. The result is notifications are dispatched with calls to the
context's Repository instance and are queued to each endpoint via the
broadcaster.
This commit also adds the concept of a RequestID and App.InstanceID. The
request id uniquely identifies each request and the InstanceID uniquely
identifies a run of the registry. These identifiers can be used in the future
to correlate log messages with generated events to support rich debugging.
The fields of the app were slightly reorganized for clarity and a few horrid
util functions have been removed.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Several API tests were added to ensure correct acceptance of zero-size and
empty tar files. This led to several changes in the storage backend around the
guarantees of remote file reading, which backs the layer and layer upload type.
In support of these changes, zero-length and empty checks have been added to
the digest package. These provide a sanity check against upstream tarsum
changes. The fileReader has been modified to be more robust when reading and
seeking on zero-length or non-existent files. The file no longer needs to exist
for the reader to be created. Seeks can now move beyond the end of the file,
causing reads to issue an io.EOF. This eliminates errors during certain race
conditions for reading files which should be detected by stat calls. As a part
of this, a few error types were factored out and the read buffer size was
increased to something more reasonable.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
When requesting a token, the basic auth header is always being set even
if there is no username value. This patch corrects this and does not set
the basic auth header if the username is empty.
Also fixes an issue where pulling all tags from a v2 registry succeeds
when the image does not actually exist on the registry.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
When getting the URL from a v2 registry url builder, it does not
honor the scheme from the endpoint object and will cause an https
endpoint to return urls starting with http.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
This changeset addresses intermittent internal server errors encountered during
pushes. The root cause has been isolated to layers that result in identical,
empty filesystems but may have some path declarations (imaginge "./"),
resulting in different tarsums. The main error message reported during these
upload problems was a 500 error, which was not correct. Further investigation
showed the errors to be rooted in digest verification when finishing uploads.
Inspection of the surrounding code also identified a few issues. PutLayerChunk
was slightly refactered into PutLayerUploadComplete. Helper methods were
avoided to make handler less confusing. This simplification leveraged an
earlier change in the spec that moved non-complete chunk uploads to the PATCH
method. Simple logging was also added in the unknown error case that should
help to avoid mysterious 500 errors in the future.
At the same time, the glaring omission of a proper layer upload cancel method
was rectified. This has been added in this change so it is not missed in the
future.
In the future, we may want to refactor the handler code to be more
straightforward, hopefully letting us avoid these problems in the future.
Added test cases that reproduce these errors and drove these changes include
the following:
1. Push a layer with an empty body results in invalid blob upload.
2. Push a layer with a different tarsum (in this case, empty tar)
3. Deleting a layer upload works.
4. Getting status on a deleted layer upload returns 404.
Common functionality was grouped into shared functions to remove repitition.
The API tests will still require future love.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Under certain cases, such as when putting a manifest or check for the existence
of a layer, the status code checks in session_v2.go were too narrow for their
purpose. In the case of putting a manifest, the handler only cares that an
error is not returned. Whether it is a 304 or 202 does not matter, as long as
the server reports success. Having the client only accept specific http codes
inhibits future protocol evolution.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Since the Docker-Distribution-API-Version header value may contain multiple
space delimited versions as well as many instances of the header key, the
header value is now split on whitespace characters to iterate over all versions
that may be listed in one instance of the header.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
v2 ping now checks for a Docker-Distribution-API-Version
header that identifies the endpoint as "registry/2.0"
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Setting a header for all responses can help clients better determine
if the server speaks the legacy v1 API or the v2 API. It is important
that the header be set *BEFORE* routing the request.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Fixes#10129
Makes the .dockercfg more human parsable.
Also cleaned up the (technically) racey login test.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Token cache prevents the need to get a new token for every registry interaction.
Since the tokens are short lived, the cache expires after only a minute.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
While the v2 pull operation is writing the body of the layer blob to disk
it now computes the tarsum checksum of the archive before extracting it to
the backend storage driver. If the checksum does not match that from the
image manifest an error is raised.
Also adds more debug logging to the pull operation and fixes existing test
cases which were failing. Adds a reverse lookup constructor to the tarsum
package so that you can get a tarsum object using a checksum label.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Because docker core cannot vendor non-master Go dependencies, we need to remove
dependencies on registry package. The definition of digest.Digest has been
changed to a string and the regular expressions have been ported from
docker-registry/common library.
We'll likely change this be dependent on the registry in the future when the
API stabilizies and use of the master branch becomes the norm.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This package, ported from next-generation docker regsitry, includes route and
error definitions. These facilitate compliant V2 client implementation. The
portions of the HTTP API that are included in this package are considered to be
locked down and should only be changed through a careful change proposal.
Descriptor definitions package layout may change without affecting API behavior
until the exported Go API is ready to be locked down.
When the new registry stabilizes and becomes the master branch, this package
can be vendored from the registry.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Registry authorization token is now taken from the response body rather than
the repsonse header.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
summary of changes:
registry/auth.go
- More logging around the login functions
- split Login() out to handle different code paths for v1 (unchanged logic)
and v2 (does not currently do account creation)
- handling for either basic or token based login attempts
registry/authchallenge.go
- New File
- credit to Brian Bland <brian.bland@docker.com> (github: BrianBland)
- handles parsing of WWW-Authenticate response headers
registry/endpoint.go
- EVEN MOAR LOGGING
- Many edits throught to make the coad less dense. Sparse code is more
readable code.
- slit Ping() out to handle different code paths for v1 (unchanged logic)
and v2.
- Updated Endpoint struct type to include an entry for authorization
challenges discovered during ping of a v2 registry.
- If registry endpoint version is unknown, v2 code path is first attempted,
then fallback to v1 upon failure.
registry/service.go
- STILL MOAR LOGGING
- simplified the logic around starting the 'auth' job.
registry/session.go
- updated use of a registry.Endpoint struct field.
registry/token.go
- New File
- Handles getting token from the parameters of a token auth challenge.
- Modified from function written by Brian Bland (see above credit).
registry/types.go
- Removed 'DefaultAPIVersion' in lieu of 'APIVersionUnknown = 0'`
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Because we guarded the error check, nil Upload on the handler was getting
through to unexpected branches. This directly handles the missing upload
ensuring its set as expected.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Most of this change follows from the modifications to the storage api. The
driving factor is the separation of layerUploadState from the storage backend,
leaving it to the web application to store and update it. As part of the
updates to meet changes in the storage api, support for the size parameter has
been completely removed.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This refactors the hmac state token to take control of the layerUploadState
json message, which has been removed from the storage backend. It also moves
away from the concept of a LayerUploadStateStore callback object, which was
short-lived. This allows for upload offset to be managed by the web application
logic in the face of an inconsistent backend. By controlling the upload offset
externally, we reduce the possibility of misreporting upload state to a client.
We may still want to modify the way this works after getting production
experience.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Passing RepositoryInfo to ResolveAuthConfig, pullRepository, and pushRepository
Moving --registry-mirror configuration to registry config
Created resolve_repository job
Repo names with 'index.docker.io' or 'docker.io' are now synonymous with omitting an index name.
Adding test for RepositoryInfo
Adding tests for opts.StringSetOpts and registry.ValidateMirror
Fixing search term use of repoInfo
Adding integration tests for registry mirror configuration
Normalizing LookupImage image name to match LocalName parsing rules
Normalizing repository LocalName to avoid multiple references to an official image
Removing errorOut use in tests
Removing TODO comment
gofmt changes
golint comments cleanup. renaming RegistryOptions => registry.Options, and RegistryServiceConfig => registry.ServiceConfig
Splitting out builtins.Registry and registry.NewService calls
Stray whitespace cleanup
Moving integration tests for Mirrors and InsecureRegistries into TestNewIndexInfo unit test
Factoring out ValidateRepositoryName from NewRepositoryInfo
Removing unused IndexServerURL
Allowing json marshaling of ServiceConfig. Exposing ServiceConfig in /info
Switching to CamelCase for json marshaling
PR cleanup; removing 'Is' prefix from boolean members. Removing unneeded json tags.
Removing non-cleanup related fix for 'localhost:[port]' in splitReposName
Merge fixes for gh9735
Fixing integration test
Reapplying #9754
Adding comment on config.IndexConfigs use from isSecureIndex
Remove unused error return value from isSecureIndex
Signed-off-by: Don Kjer <don.kjer@gmail.com>
Adding back comment in isSecureIndex
Signed-off-by: Don Kjer <don.kjer@gmail.com>
Since the repo is no longer just the registry, we are moving the registry web
application package out of the repo root into a sub-package. We may break down
the registry package further to separate webapp components and bring the client
package under it. This change accomplishes the task of freeing up the repo root
for a distribution-oriented package. A stub doc.go file is left in place to
declare intent.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
If `--insecure-registry mydomain.com` was specified, it would match a registry at mydomain.com on any port.
This was accidentally added in #9735 and is now being reverted.
Signed-off-by: Tibor Vass <teabee89@gmail.com>
This commit is patch for following comment
// TODO: This method should return the errors instead of masking them and returning false
Signed-off-by: Daehyeok Mun <daehyeok@gmail.com>
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Incase of a 3xx redirect the var was being overshowed and ever changed
causing an infinite loop.
Fixes#9480
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This ensures that ServerAddress is set, while previously it was getting
set after configFile.Configs.
Signed-off-by: Vaidas Jablonskis <jablonskis@gmail.com>
Fix issue with restoring the tag store and setting static configuration
from the daemon. i.e. the field on the TagStore struct must be made
internal or the json.Unmarshal in restore will overwrite the insecure
registries to be an empty struct.
Signed-off-by: Michael Crosby <michael@docker.com>
Conflicts:
graph/pull.go
graph/push.go
graph/tags.go
We do this to prevent leakage of information, we don't want people
to be able to probe for existing content.
According to RFC 2616, "This status code (404) is commonly used when the server does not
wish to reveal exactly why the request has been refused, or when no other response i
is applicable."
https://www.ietf.org/rfc/rfc2616.txt
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it.
Authorization will not help and the request SHOULD NOT be repeated.
If the request method was not HEAD and the server wishes to make
public why the request has not been fulfilled, it SHOULD describe the
reason for the refusal in the entity. If the server does not wish to
make this information available to the client, the status code 404
(Not Found) can be used instead.
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No
indication is given of whether the condition is temporary or
permanent. The 410 (Gone) status code SHOULD be used if the server
knows, through some internally configurable mechanism, that an old
resource is permanently unavailable and has no forwarding address.
This status code is commonly used when the server does not wish to
reveal exactly why the request has been refused, or when no other
response is applicable.
When docker is running through its certificates, it should continue
trying with a new certificate even if it gets back a 404 error code.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Add support for pulling signed images from a version 2 registry.
Only official images within the library namespace will be pull from the
new registry and check the build signature.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This introduces Versions for TarSum checksums.
Fixes: https://github.com/docker/docker/issues/7526
It preserves current functionality and abstracts the interface for
future flexibility of hashing algorithms. As a POC, the VersionDev
Tarsum does not include the mtime in the checksum calculation, and would
solve https://github.com/docker/docker/issues/7387 though this is not a
settled Version is subject to change until a version number is assigned.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Per registry.doRequest, res and client might be nil in case of error
For example, dns resolution errors, /etc/docker/certs.d perms, failed
loading of x509 cert ...
This will make res.StatusCode and res.Body SEGFAULT.
Signed-off-by: Arthur Gautier <baloo@gandi.net>
To avoid conflicting with layer IDs, repository names must
not be tagged with names that collide with hexadecimal strings.
Signed-off-by: Eric Windisch <eric@windisch.us>
The cli interface works similar to other registry related commands:
docker search foo
... searches for foo on the official hub
docker search localhost:5000/foo
... does the same for the private reg at localhost:5000
Signed-off-by: Daniel Menet <membership@sontags.ch>
renaming this struct to more clearly be session, as that is what it
handles.
Splitting out files for easier readability.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
functions to pkg/parsers/kernel, and parsing filters to
pkg/parsers/filter. Adjust imports and package references.
Docker-DCO-1.1-Signed-off-by: Erik Hollensbe <github@hollensbe.org> (github: erikh)
This lets you specify custom client TLS certificates and CA root for a
specific registry hostname. Docker will then verify the registry
against the CA and present the client cert when talking to that
registry. This allows the registry to verify that the client has a
proper key, indicating that the client is allowed to access the
images.
A custom cert is configured by creating a directory in
/etc/docker/certs.d with the same name as the registry hostname. Inside
this directory all *.crt files are added as CA Roots (if none exists,
the system default is used) and pair of files <filename>.key and
<filename>.cert indicate a custom certificate to present to the registry.
If there are multiple certificates each one will be tried in
alphabetical order, proceeding to the next if we get a 403 of 5xx
response.
So, an example setup would be:
/etc/docker/certs.d/
└── localhost
├── client.cert
├── client.key
└── localhost.crt
A simple way to test this setup is to use an apache server to host a
registry. Just copy a registry tree into the apache root, here is an
example one containing the busybox image:
http://people.gnome.org/~alexl/v1.tar.gz
Then add this conf file as /etc/httpd/conf.d/registry.conf:
# This must be in the root context, otherwise it causes a re-negotiation
# which is not supported by the tls implementation in go
SSLVerifyClient optional_no_ca
<Location /v1>
Action cert-protected /cgi-bin/cert.cgi
SetHandler cert-protected
Header set x-docker-registry-version "0.6.2"
SetEnvIf Host (.*) custom_host=$1
Header set X-Docker-Endpoints "%{custom_host}e"
</Location>
And this as /var/www/cgi-bin/cert.cgi
#!/bin/bash
if [ "$HTTPS" != "on" ]; then
echo "Status: 403 Not using SSL"
echo "x-docker-registry-version: 0.6.2"
echo
exit 0
fi
if [ "$SSL_CLIENT_VERIFY" == "NONE" ]; then
echo "Status: 403 Client certificate invalid"
echo "x-docker-registry-version: 0.6.2"
echo
exit 0
fi
echo "Content-length: $(stat --printf='%s' $PATH_TRANSLATED)"
echo "x-docker-registry-version: 0.6.2"
echo "X-Docker-Endpoints: $SERVER_NAME"
echo "X-Docker-Size: 0"
echo
cat $PATH_TRANSLATED
This will return 403 for all accessed to /v1 unless *any* client cert
is presented. Obviously a real implementation would verify more details
about the certificate.
Example client certs can be generated with:
openssl genrsa -out client.key 1024
openssl req -new -x509 -text -key client.key -out client.cert
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
These constants don't need to use time.Duration(). Fixup this file since
it seems to be the only one using this style.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
