This makes them easier to find between the non-exported ones, and puts
them as separate sections in the generated docs. While updating, also
extended documentation for some to be more descriptive.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Localhost is treated special when parsing references, and always considered
to be a domain, despite not having a "." nor a ":port". Adding a const for
this, to allow documenting this special case (making it more visible).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This pattern was used in two places, so adding an intermediate variable allows
documenting its purpose. The "remote-name" grammer (which is interchangably
used with "path") also seemed to be missing from the grammar, so adding it.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `domain` variable didn't make it clear that this could include port-numbers
as well, so renaming it makes that more visible.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The remaining uses of "expression()" were quite trivial; probably goes without
saying, but just using string-concatenating for these is more performant as well,
and removing the extra abstraction may make it easier to read;
pkg: github.com/distribution/distribution/v3/reference
BenchmarkExpression
BenchmarkExpression-10 27260877 43.10 ns/op 24 B/op 1 allocs/op
BenchmarkConcat
BenchmarkConcat-10 1000000000 0.3154 ns/op 0 B/op 0 allocs/op
PASS
ok github.com/distribution/distribution/v3/reference 1.762s
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With the exception of ".", none of the literals used required escaping, which made
the function rather redundant (and the extra abstraction made it harder to read).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
NameRegexp does not have capturing groups, so updating the documentation
to reflect that.
To verify if this was an unintentional regression, I looked up the commit
that introduced this regex (31a448a628), and
it looks like it never had capturing groups, so this was just a mistake in
the docs.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch:
- makes regexp strings that are constant a const
- moves some variables closer to where they're used
- removes some intermediate vars
- un-wraps some lines; they're lengthy, but probably more readable than having
them wrapped over multiple lines.
- touches-up some docs.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Not all tests have been rewritten to use sub-tests; for those
I enabled t.Parallel() for the parent test only.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- use strings.HasPrefix() to check for the prefix we're interested in instead
of doing a strings.Split() without limits. This makes the code both easier
to read, and prevents potential situations where we end up with a long slice.
- use consts for defaults; these should never be modified, so better to use
consts for them to indicate they're fixed values.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This upstreams `Sort()` as originally implemented in containerd in
https://github.com/containerd/containerd/0886ceaea2470edc7339dfc5ebe0e3257ae84d06
From that commit:
> Fix reference ordering in CRI image store
>
> Currently image references end up being stored in a
> random order due to the way maps are iterated through
> in Go. This leads to inconsistent identifiers being
> resolved when a single reference is needed to identify
> an image and the ordering of the references is used for
> the selection.
>
> Sort references in a consistent and ranked manner,
> from higher information formats to lower.
>
> Note: A `name + tag` reference is considered higher
> information than a `name + digest` reference since a
> registry may be used to resolve the digest from a
> `name + tag` reference.
Co-Authored-by: Derek McGowan <derek@mcg.dev>
Co-Authored-by: Maksym Pavlenko <pavlenko.maksym@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Go requires "deprecated" comments to have an empty line before them,
and to not be all-caps.
This updates to the comment so that it's correctly picked up as deprecated.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "shortid" syntax was added in d26a3b37a6,
and allowed for matching an image on its ID prefix (this is before images were
content-addressable). With the introduction of content-addressable references,
this syntax became problematic, and Docker deprecated this syntax in 2016
(Docker v1.13.0) through commit; 5fc71599a0
> The `repository:shortid` syntax for referencing images is very little used,
> collides with tag references, and can be confused with digest references.
Support for this syntax was removed in 2017 (Docker 17.12) through commit:
a942c92dd7
containerd uses a fork of the reference package with this syntax removed, and
does not support this syntax:
901bcb2231
This patch removes the deprecated syntax, the ParseAnyReferenceWithSet function,
and the ShortIdentifierRegexp regex.
As there are no external consumers for this function, nor the regexp, I'm
skipping a deprecation cycle for this;
- https://grep.app/search?q=.ShortIdentifierRegexp
- https://grep.app/search?q=.ParseAnyReferenceWithSet%28
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
gofumpt (https://github.com/mvdan/gofumpt) provides a supserset of `gofmt` / `go fmt`,
and addresses various formatting issues that linters may be checking for.
We can consider enabling the `gofumpt` linter to verify the formatting in CI, although
not every developer may have it installed, so for now this runs it once to get formatting
in shape.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Current registry reference use a subset of dns and IPv4 addresses to
represent a registry domain.
Since registries are mostly compatible with rfc3986, that defines the
URI generic syntax, this adds support for IPv6 enclosed in squared
brackets based on the mentioned rfc.
The regexp is only expanded to match on IPv6 addreses enclosed between
square brackets, considering only regular IPv6 addresses represented
as compressed or uncompressed, excluding special IPv6 address
representations.
Signed-off-by: Antonio Ojea <antonio.ojea.garcia@gmail.com>
Go 1.13 and up enforce import paths to be versioned if a project
contains a go.mod and has released v2 or up.
The current v2.x branches (and releases) do not yet have a go.mod,
and therefore are still allowed to be imported with a non-versioned
import path (go modules add a `+incompatible` annotation in that case).
However, now that this project has a `go.mod` file, incompatible
import paths will not be accepted by go modules, and attempting
to use code from this repository will fail.
This patch uses `v3` for the import-paths (not `v2`), because changing
import paths itself is a breaking change, which means that the
next release should increment the "major" version to comply with
SemVer (as go modules dictate).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
ParseDockerRef normalizes the image reference following the docker
convention. This is added mainly for backward compatibility. The reference
returned can only be either tagged or digested. For reference contains both tag
and digest, the function returns digested reference, e.g.
docker.io/library/busybox:latest@sha256:7cc4b5aefd1d0cadf8d97d4350462ba51c694ebca145b08d7d41b41acc8db5aa
will be returned as
docker.io/library/busybox@sha256:7cc4b5aefd1d0cadf8d97d4350462ba51c694ebca145b08d7d41b41acc8db5aa.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This updates the grammar to allow more than one digest algorithm
separator, matching the regular expression and intended grammar.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The common use case for this function is to add a default tag if the
reference only has a name. The current behavior only adds the default
tag if there is no *tag*, which requires most callers to check for a
digest. Change the behavior to only add default tags to name-only
references, and change the name to reflect this. The documentation
already described the new behavior, so it does not need to be changed.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The identifier fields were using spaces while the rest
of the lines were using tabs!
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
