Several API tests were added to ensure correct acceptance of zero-size and
empty tar files. This led to several changes in the storage backend around the
guarantees of remote file reading, which backs the layer and layer upload type.
In support of these changes, zero-length and empty checks have been added to
the digest package. These provide a sanity check against upstream tarsum
changes. The fileReader has been modified to be more robust when reading and
seeking on zero-length or non-existent files. The file no longer needs to exist
for the reader to be created. Seeks can now move beyond the end of the file,
causing reads to issue an io.EOF. This eliminates errors during certain race
conditions for reading files which should be detected by stat calls. As a part
of this, a few error types were factored out and the read buffer size was
increased to something more reasonable.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
When requesting a token, the basic auth header is always being set even
if there is no username value. This patch corrects this and does not set
the basic auth header if the username is empty.
Also fixes an issue where pulling all tags from a v2 registry succeeds
when the image does not actually exist on the registry.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
When getting the URL from a v2 registry url builder, it does not
honor the scheme from the endpoint object and will cause an https
endpoint to return urls starting with http.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
This changeset addresses intermittent internal server errors encountered during
pushes. The root cause has been isolated to layers that result in identical,
empty filesystems but may have some path declarations (imaginge "./"),
resulting in different tarsums. The main error message reported during these
upload problems was a 500 error, which was not correct. Further investigation
showed the errors to be rooted in digest verification when finishing uploads.
Inspection of the surrounding code also identified a few issues. PutLayerChunk
was slightly refactered into PutLayerUploadComplete. Helper methods were
avoided to make handler less confusing. This simplification leveraged an
earlier change in the spec that moved non-complete chunk uploads to the PATCH
method. Simple logging was also added in the unknown error case that should
help to avoid mysterious 500 errors in the future.
At the same time, the glaring omission of a proper layer upload cancel method
was rectified. This has been added in this change so it is not missed in the
future.
In the future, we may want to refactor the handler code to be more
straightforward, hopefully letting us avoid these problems in the future.
Added test cases that reproduce these errors and drove these changes include
the following:
1. Push a layer with an empty body results in invalid blob upload.
2. Push a layer with a different tarsum (in this case, empty tar)
3. Deleting a layer upload works.
4. Getting status on a deleted layer upload returns 404.
Common functionality was grouped into shared functions to remove repitition.
The API tests will still require future love.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Under certain cases, such as when putting a manifest or check for the existence
of a layer, the status code checks in session_v2.go were too narrow for their
purpose. In the case of putting a manifest, the handler only cares that an
error is not returned. Whether it is a 304 or 202 does not matter, as long as
the server reports success. Having the client only accept specific http codes
inhibits future protocol evolution.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Since the Docker-Distribution-API-Version header value may contain multiple
space delimited versions as well as many instances of the header key, the
header value is now split on whitespace characters to iterate over all versions
that may be listed in one instance of the header.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
v2 ping now checks for a Docker-Distribution-API-Version
header that identifies the endpoint as "registry/2.0"
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Setting a header for all responses can help clients better determine
if the server speaks the legacy v1 API or the v2 API. It is important
that the header be set *BEFORE* routing the request.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Fixes#10129
Makes the .dockercfg more human parsable.
Also cleaned up the (technically) racey login test.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Token cache prevents the need to get a new token for every registry interaction.
Since the tokens are short lived, the cache expires after only a minute.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
While the v2 pull operation is writing the body of the layer blob to disk
it now computes the tarsum checksum of the archive before extracting it to
the backend storage driver. If the checksum does not match that from the
image manifest an error is raised.
Also adds more debug logging to the pull operation and fixes existing test
cases which were failing. Adds a reverse lookup constructor to the tarsum
package so that you can get a tarsum object using a checksum label.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Because docker core cannot vendor non-master Go dependencies, we need to remove
dependencies on registry package. The definition of digest.Digest has been
changed to a string and the regular expressions have been ported from
docker-registry/common library.
We'll likely change this be dependent on the registry in the future when the
API stabilizies and use of the master branch becomes the norm.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This package, ported from next-generation docker regsitry, includes route and
error definitions. These facilitate compliant V2 client implementation. The
portions of the HTTP API that are included in this package are considered to be
locked down and should only be changed through a careful change proposal.
Descriptor definitions package layout may change without affecting API behavior
until the exported Go API is ready to be locked down.
When the new registry stabilizes and becomes the master branch, this package
can be vendored from the registry.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Registry authorization token is now taken from the response body rather than
the repsonse header.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
summary of changes:
registry/auth.go
- More logging around the login functions
- split Login() out to handle different code paths for v1 (unchanged logic)
and v2 (does not currently do account creation)
- handling for either basic or token based login attempts
registry/authchallenge.go
- New File
- credit to Brian Bland <brian.bland@docker.com> (github: BrianBland)
- handles parsing of WWW-Authenticate response headers
registry/endpoint.go
- EVEN MOAR LOGGING
- Many edits throught to make the coad less dense. Sparse code is more
readable code.
- slit Ping() out to handle different code paths for v1 (unchanged logic)
and v2.
- Updated Endpoint struct type to include an entry for authorization
challenges discovered during ping of a v2 registry.
- If registry endpoint version is unknown, v2 code path is first attempted,
then fallback to v1 upon failure.
registry/service.go
- STILL MOAR LOGGING
- simplified the logic around starting the 'auth' job.
registry/session.go
- updated use of a registry.Endpoint struct field.
registry/token.go
- New File
- Handles getting token from the parameters of a token auth challenge.
- Modified from function written by Brian Bland (see above credit).
registry/types.go
- Removed 'DefaultAPIVersion' in lieu of 'APIVersionUnknown = 0'`
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Because we guarded the error check, nil Upload on the handler was getting
through to unexpected branches. This directly handles the missing upload
ensuring its set as expected.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Most of this change follows from the modifications to the storage api. The
driving factor is the separation of layerUploadState from the storage backend,
leaving it to the web application to store and update it. As part of the
updates to meet changes in the storage api, support for the size parameter has
been completely removed.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This refactors the hmac state token to take control of the layerUploadState
json message, which has been removed from the storage backend. It also moves
away from the concept of a LayerUploadStateStore callback object, which was
short-lived. This allows for upload offset to be managed by the web application
logic in the face of an inconsistent backend. By controlling the upload offset
externally, we reduce the possibility of misreporting upload state to a client.
We may still want to modify the way this works after getting production
experience.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Passing RepositoryInfo to ResolveAuthConfig, pullRepository, and pushRepository
Moving --registry-mirror configuration to registry config
Created resolve_repository job
Repo names with 'index.docker.io' or 'docker.io' are now synonymous with omitting an index name.
Adding test for RepositoryInfo
Adding tests for opts.StringSetOpts and registry.ValidateMirror
Fixing search term use of repoInfo
Adding integration tests for registry mirror configuration
Normalizing LookupImage image name to match LocalName parsing rules
Normalizing repository LocalName to avoid multiple references to an official image
Removing errorOut use in tests
Removing TODO comment
gofmt changes
golint comments cleanup. renaming RegistryOptions => registry.Options, and RegistryServiceConfig => registry.ServiceConfig
Splitting out builtins.Registry and registry.NewService calls
Stray whitespace cleanup
Moving integration tests for Mirrors and InsecureRegistries into TestNewIndexInfo unit test
Factoring out ValidateRepositoryName from NewRepositoryInfo
Removing unused IndexServerURL
Allowing json marshaling of ServiceConfig. Exposing ServiceConfig in /info
Switching to CamelCase for json marshaling
PR cleanup; removing 'Is' prefix from boolean members. Removing unneeded json tags.
Removing non-cleanup related fix for 'localhost:[port]' in splitReposName
Merge fixes for gh9735
Fixing integration test
Reapplying #9754
Adding comment on config.IndexConfigs use from isSecureIndex
Remove unused error return value from isSecureIndex
Signed-off-by: Don Kjer <don.kjer@gmail.com>
Adding back comment in isSecureIndex
Signed-off-by: Don Kjer <don.kjer@gmail.com>
Since the repo is no longer just the registry, we are moving the registry web
application package out of the repo root into a sub-package. We may break down
the registry package further to separate webapp components and bring the client
package under it. This change accomplishes the task of freeing up the repo root
for a distribution-oriented package. A stub doc.go file is left in place to
declare intent.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
