Embed the interface that we're mocking; calling any of it's methods
that are not implemented will panic, so should give the same result
as before.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Both of these were deprecated in 55f675811a,
but the format of the GoDoc comments didn't follow the correct format, which
caused them not being picked up by tools as "deprecated".
This patch updates uses in the codebase to use the alternatives.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
gofumpt (https://github.com/mvdan/gofumpt) provides a supserset of `gofmt` / `go fmt`,
and addresses various formatting issues that linters may be checking for.
We can consider enabling the `gofumpt` linter to verify the formatting in CI, although
not every developer may have it installed, so for now this runs it once to get formatting
in shape.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Go 1.13 and up enforce import paths to be versioned if a project
contains a go.mod and has released v2 or up.
The current v2.x branches (and releases) do not yet have a go.mod,
and therefore are still allowed to be imported with a non-versioned
import path (go modules add a `+incompatible` annotation in that case).
However, now that this project has a `go.mod` file, incompatible
import paths will not be accepted by go modules, and attempting
to use code from this repository will fail.
This patch uses `v3` for the import-paths (not `v2`), because changing
import paths itself is a breaking change, which means that the
next release should increment the "major" version to comply with
SemVer (as go modules dictate).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Back in the before time, the best practices surrounding usage of Context
weren't quite worked out. We defined our own type to make usage easier.
As this packaged was used elsewhere, it make it more and more
challenging to integrate with the forked `Context` type. Now that it is
available in the standard library, we can just use that one directly.
To make usage more consistent, we now use `dcontext` when referring to
the distribution context package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The registry uses partial Named values which the named parsers
no longer support. To allow the registry service to continue
to operate without canonicalization, switch to use WithName.
In the future, the registry should start using fully canonical
values on the backend and WithName should no longer support
creating partial values.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
To allow generic manifest walking, we define an interface method of
`References` that returns the referenced items in the manifest. The
current implementation does not return the config target from schema2,
making this useless for most applications.
The garbage collector has been modified to show the utility of this
correctly formed `References` method. We may be able to make more
generic traversal methods with this, as well.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
When we push a schema1 manifest, we encode history information from the
image JSON into v1Compatibility strings for the respective layers. The
"author" field was not being set in these v1Compatibility strings, so if
a parent layer had an author set, it would not be preserved after
pushing through a schema1 manifest and repulling, so the image ID would
change after the pull. This change preserves the authorship information
for parent layers so that the image ID does not change.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add option for specifying trust key for signing schema1 manifests.
Since schema1 signature key identifiers are not verified anywhere and deprecated, storing signatures is no longer a requirement.
Furthermore in schema2 there is no signature, requiring the registry to already add signatures to generated schema1 manifests.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Most places in the registry were using string types to refer to
repository names. This changes them to use reference.Named, so the type
system can enforce validation of the naming rules.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The Payload function for schema1 currently returns a signed manifest,
but indicates the content type is that of a manifest that isn't signed.
Note that this breaks compatibility with Registry 2.3 alpha 1 and
Docker 1.10-rc1, because they use the incorrect content type.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
For compatibility with other registries that don't use this exact
variant of the Content-Type header, we need to be more flexible about
what we accept. Any form of "application/json" should be allowed. The
charset should not be included in the comparison.
See docker/docker#19400.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Removes the Mount operation and instead implements this behavior as part
of Create a From option is provided, which in turn returns a rich
ErrBlobMounted indicating that a blob upload session was not initiated,
but instead the blob was mounted from another repository
Signed-off-by: Brian Bland <brian.bland@docker.com>
Add schema2 manifest implementation.
Add a schema2 builder that creates a schema2 manifest from descriptors
and a configuration. It will add the configuration to the blob store if
necessary.
Rename the original schema1 manifest builder to ReferenceBuilder, and
create a ConfigBuilder variant that can build a schema1 manifest from an
image configuration and set of descriptors. This will be used to
translate schema2 manifests to the schema1 format for backward
compatibliity, by adding the descriptors from the existing schema2
manifest to the schema1 builder. It will also be used by engine-side
push code to create schema1 manifests from the new-style image
configration, when necessary to push a schema1 manifest.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add a generic Manifest interface to represent manifests in the registry and
remove references to schema specific manifests.
Add a ManifestBuilder to construct Manifest objects. Concrete manifest builders
will exist for each manifest type and implementations will contain manifest
specific data used to build a manifest.
Remove Signatures() from Repository interface.
Signatures are relevant only to schema1 manifests. Move access to the signature
store inside the schema1 manifestStore. Add some API tests to verify
signature roundtripping.
schema1
-------
Change the way data is stored in schema1.Manifest to enable Payload() to be used
to return complete Manifest JSON from the HTTP handler without knowledge of the
schema1 protocol.
tags
----
Move tag functionality to a seperate TagService and update ManifestService
to use the new interfaces. Implement a driver based tagService to be backward
compatible with the current tag service.
Add a proxyTagService to enable the registry to get a digest for remote manifests
from a tag.
manifest store
--------------
Remove revision store and move all signing functionality into the signed manifeststore.
manifest registration
---------------------
Add a mechanism to register manifest media types and to allow different manifest
types to be Unmarshalled correctly.
client
------
Add ManifestServiceOptions to client functions to allow tags to be passed into Put and
Get for building correct registry URLs. Change functional arguments to be an interface type
to allow passing data without mutating shared state.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
tarsum is not actually used by the registry. Remove support for it.
Convert numerous uses in unit tests to SHA256.
Update docs to remove mentions of tarsums (which were often inaccurate).
Remove tarsum dependency.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
contains equal length History and FSLayer arrays.
This is required to prevent malformed manifests being put to the registry and
failing external verification checks.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
To ensure that we only unmarshal the verified payload into the contained
manifest, we first copy the entire incoming buffer into Raw and then unmarshal
only the Payload portion of the incoming bytes. If the contents is later
verified, the caller can then be sure that the contents of the Manifest fields
can be trusted.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
As we begin our march towards multi-arch, we must prepare for the reality of
multiple manifest schemas. This is the beginning of a set of changes to
facilitate this. We are both moving this package into its target position where
it may live peacefully next to other manfiest versions.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
