cosmopolitan/libc/sock/recvmsg.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

126 lines
5.3 KiB
C
Raw Normal View History

2021-04-08 05:53:23 +00:00
/*-*- mode:c;indent-tabs-mode:nil;c-basic-offset:2;tab-width:8;coding:utf-8 -*-│
vi: set et ft=c ts=2 sts=2 sw=2 fenc=utf-8 :vi
Copyright 2020 Justine Alexandra Roberts Tunney
Permission to use, copy, modify, and/or distribute this software for
any purpose with or without fee is hereby granted, provided that the
above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.
*/
#include "libc/assert.h"
#include "libc/calls/cp.internal.h"
2021-04-08 05:53:23 +00:00
#include "libc/calls/internal.h"
#include "libc/calls/struct/fd.internal.h"
2021-04-08 05:53:23 +00:00
#include "libc/calls/struct/iovec.h"
#include "libc/calls/struct/iovec.internal.h"
2021-04-08 05:53:23 +00:00
#include "libc/dce.h"
#include "libc/errno.h"
#include "libc/intrin/kprintf.h"
#include "libc/intrin/strace.internal.h"
#include "libc/runtime/runtime.h"
2021-04-08 05:53:23 +00:00
#include "libc/sock/sock.h"
#include "libc/sock/struct/msghdr.h"
#include "libc/sock/struct/msghdr.internal.h"
#include "libc/sock/struct/sockaddr.internal.h"
2022-05-23 22:06:11 +00:00
#include "libc/sock/syscall_fd.internal.h"
2021-04-08 05:53:23 +00:00
#include "libc/str/str.h"
#include "libc/sysv/errfuns.h"
/**
* Sends a message from a socket.
*
* Note: Ancillary data currently isn't polyfilled across platforms.
*
2021-04-08 05:53:23 +00:00
* @param fd is the file descriptor returned by socket()
* @param msg is a pointer to a struct msghdr containing all the allocated
* buffers where to store incoming data.
* @param flags MSG_OOB, MSG_DONTROUTE, MSG_PARTIAL, MSG_NOSIGNAL, etc.
* @return number of bytes received, or -1 w/ errno
* @error EINTR, EHOSTUNREACH, ECONNRESET (UDP ICMP Port Unreachable),
* EPIPE (if MSG_NOSIGNAL), EMSGSIZE, ENOTSOCK, EFAULT, etc.
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is *controlled* by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread.
2023-10-08 12:36:18 +00:00
* @cancelationpoint
2021-04-08 05:53:23 +00:00
* @asyncsignalsafe
* @restartable (unless SO_RCVTIMEO)
2021-04-08 05:53:23 +00:00
*/
ssize_t recvmsg(int fd, struct msghdr *msg, int flags) {
ssize_t rc, got;
struct msghdr msg2;
union sockaddr_storage_bsd bsd;
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is *controlled* by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread.
2023-10-08 12:36:18 +00:00
BEGIN_CANCELATION_POINT;
if (IsAsan() && !__asan_is_valid_msghdr(msg)) {
rc = efault();
} else if (fd < g_fds.n && g_fds.p[fd].kind == kFdZip) {
rc = enotsock();
} else if (!IsWindows()) {
if (IsBsd() && msg->msg_name) {
memcpy(&msg2, msg, sizeof(msg2));
if (!(rc = sockaddr2bsd(msg->msg_name, msg->msg_namelen, &bsd,
&msg2.msg_namelen))) {
msg2.msg_name = &bsd.sa;
if ((rc = sys_recvmsg(fd, &msg2, flags)) != -1) {
sockaddr2linux(msg2.msg_name, msg2.msg_namelen, msg->msg_name,
&msg->msg_namelen);
}
}
} else {
rc = sys_recvmsg(fd, msg, flags);
2021-04-08 05:53:23 +00:00
}
} else if (__isfdopen(fd)) {
if (!msg->msg_control) {
if (__isfdkind(fd, kFdSocket)) {
rc = sys_recvfrom_nt(fd, msg->msg_iov, msg->msg_iovlen, flags,
msg->msg_name, &msg->msg_namelen);
} else if (__isfdkind(fd, kFdFile) && !msg->msg_name) { /* socketpair */
if (!flags) {
if ((got = sys_read_nt(fd, msg->msg_iov, msg->msg_iovlen, -1)) !=
-1) {
msg->msg_flags = 0;
rc = got;
} else {
rc = -1;
}
} else {
rc = einval(); // flags not supported on nt
}
} else {
rc = enotsock();
}
} else {
rc = einval(); // control msg not supported on nt
}
} else {
rc = ebadf();
}
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is *controlled* by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread.
2023-10-08 12:36:18 +00:00
END_CANCELATION_POINT;
#if SYSDEBUG && _DATATRACE
if (__strace > 0 && strace_enabled(0) > 0) {
if (!msg || (rc == -1 && errno == EFAULT)) {
DATATRACE("recvmsg(%d, %p, %#x) → %'ld% m", fd, msg, flags, rc);
} else {
kprintf(STRACE_PROLOGUE "recvmsg(%d, [{", fd);
if (msg->msg_namelen)
kprintf(".name=%#.*hhs, ", msg->msg_namelen, msg->msg_name);
if (msg->msg_controllen)
kprintf(".control=%#.*hhs, ", msg->msg_controllen, msg->msg_control);
if (msg->msg_flags)
kprintf(".flags=%#x, ", msg->msg_flags);
kprintf(".iov=%s", DescribeIovec(rc, msg->msg_iov, msg->msg_iovlen));
kprintf("], %#x) → %'ld% m\n", flags, rc);
}
2021-04-08 05:53:23 +00:00
}
#endif
return rc;
2021-04-08 05:53:23 +00:00
}