mirror of
https://github.com/jart/cosmopolitan.git
synced 2025-01-31 19:43:32 +00:00
398f0c16fb
This change makes SSL virtual hosting possible. You can now load
multiple certificates for multiple domains and redbean will just
figure out which one to use, even if you only have 1 ip address.
You can also use a jumbo certificate that lists all your domains
in the the subject alternative names.
This change also makes performance improvements to MbedTLS. Here
are some benchmarks vs. cc1920749e
BEFORE AFTER (microsecs)
suite_ssl.com 2512881 191738 13.11x faster
suite_pkparse.com 36291 3295 11.01x faster
suite_x509parse.com 854669 120293 7.10x faster
suite_pkwrite.com 6549 1265 5.18x faster
suite_ecdsa.com 53347 18778 2.84x faster
suite_pk.com 49051 18717 2.62x faster
suite_ecdh.com 19535 9502 2.06x faster
suite_shax.com 15848 7965 1.99x faster
suite_rsa.com 353257 184828 1.91x faster
suite_x509write.com 162646 85733 1.90x faster
suite_ecp.com 20503 11050 1.86x faster
suite_hmac_drbg.no_reseed.com 19528 11417 1.71x faster
suite_hmac_drbg.nopr.com 12460 8010 1.56x faster
suite_mpi.com 687124 442661 1.55x faster
suite_hmac_drbg.pr.com 11890 7752 1.53x faster
There aren't any special tricks to the performance imporvements.
It's mostly due to code cleanup, assembly and intel instructions
like mulx, adox, and adcx.
727 lines
35 KiB
C
727 lines
35 KiB
C
/*-*- mode:c;indent-tabs-mode:nil;c-basic-offset:4;tab-width:4;coding:utf-8 -*-│
|
|
│vi: set net ft=c ts=2 sts=2 sw=2 fenc=utf-8 :vi│
|
|
╞══════════════════════════════════════════════════════════════════════════════╡
|
|
│ Copyright The Mbed TLS Contributors │
|
|
│ │
|
|
│ Licensed under the Apache License, Version 2.0 (the "License"); │
|
|
│ you may not use this file except in compliance with the License. │
|
|
│ You may obtain a copy of the License at │
|
|
│ │
|
|
│ http://www.apache.org/licenses/LICENSE-2.0 │
|
|
│ │
|
|
│ Unless required by applicable law or agreed to in writing, software │
|
|
│ distributed under the License is distributed on an "AS IS" BASIS, │
|
|
│ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. │
|
|
│ See the License for the specific language governing permissions and │
|
|
│ limitations under the License. │
|
|
╚─────────────────────────────────────────────────────────────────────────────*/
|
|
#include "libc/fmt/fmt.h"
|
|
#include "third_party/mbedtls/aes.h"
|
|
#include "third_party/mbedtls/asn1.h"
|
|
#include "third_party/mbedtls/base64.h"
|
|
#include "third_party/mbedtls/bignum.h"
|
|
#include "third_party/mbedtls/ccm.h"
|
|
#include "third_party/mbedtls/chacha20.h"
|
|
#include "third_party/mbedtls/chachapoly.h"
|
|
#include "third_party/mbedtls/cipher.h"
|
|
#include "third_party/mbedtls/common.h"
|
|
#include "third_party/mbedtls/ctr_drbg.h"
|
|
#include "third_party/mbedtls/des.h"
|
|
#include "third_party/mbedtls/dhm.h"
|
|
#include "third_party/mbedtls/ecp.h"
|
|
#include "third_party/mbedtls/entropy.h"
|
|
#include "third_party/mbedtls/error.h"
|
|
#include "third_party/mbedtls/gcm.h"
|
|
#include "third_party/mbedtls/hkdf.h"
|
|
#include "third_party/mbedtls/hmac_drbg.h"
|
|
#include "third_party/mbedtls/md.h"
|
|
#include "third_party/mbedtls/md5.h"
|
|
#include "third_party/mbedtls/oid.h"
|
|
#include "third_party/mbedtls/pem.h"
|
|
#include "third_party/mbedtls/pk.h"
|
|
#include "third_party/mbedtls/pkcs5.h"
|
|
#include "third_party/mbedtls/platform.h"
|
|
#include "third_party/mbedtls/poly1305.h"
|
|
#include "third_party/mbedtls/rsa.h"
|
|
#include "third_party/mbedtls/sha1.h"
|
|
#include "third_party/mbedtls/sha256.h"
|
|
#include "third_party/mbedtls/sha512.h"
|
|
#include "third_party/mbedtls/ssl.h"
|
|
#include "third_party/mbedtls/x509.h"
|
|
|
|
asm(".ident\t\"\\n\\n\
|
|
Mbed TLS (Apache 2.0)\\n\
|
|
Copyright ARM Limited\\n\
|
|
Copyright Mbed TLS Contributors\"");
|
|
asm(".include \"libc/disclaimer.inc\"");
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* Error message information
|
|
*
|
|
* Copyright The Mbed TLS Contributors
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
|
* not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
|
|
#if defined(MBEDTLS_ERROR_C) || defined(MBEDTLS_ERROR_STRERROR_DUMMY)
|
|
|
|
#if defined(MBEDTLS_ERROR_C)
|
|
|
|
const char * mbedtls_high_level_strerr( int error_code )
|
|
{
|
|
int high_level_error_code;
|
|
|
|
if( error_code < 0 )
|
|
error_code = -error_code;
|
|
|
|
/* Extract the high-level part from the error code. */
|
|
high_level_error_code = error_code & 0xFF80;
|
|
|
|
switch( high_level_error_code )
|
|
{
|
|
/* Begin Auto-Generated Code. */
|
|
#if defined(MBEDTLS_CIPHER_C)
|
|
case -(MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE):
|
|
return( "CIPHER - The selected feature is not available" );
|
|
case -(MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA):
|
|
return( "CIPHER - Bad input parameters" );
|
|
case -(MBEDTLS_ERR_CIPHER_ALLOC_FAILED):
|
|
return( "CIPHER - Failed to allocate memory" );
|
|
case -(MBEDTLS_ERR_CIPHER_INVALID_PADDING):
|
|
return( "CIPHER - Input data contains invalid padding and is rejected" );
|
|
case -(MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED):
|
|
return( "CIPHER - Decryption of block requires a full block" );
|
|
case -(MBEDTLS_ERR_CIPHER_AUTH_FAILED):
|
|
return( "CIPHER - Authentication failed (for AEAD modes)" );
|
|
case -(MBEDTLS_ERR_CIPHER_INVALID_CONTEXT):
|
|
return( "CIPHER - The context is invalid. For example, because it was freed" );
|
|
case -(MBEDTLS_ERR_CIPHER_HW_ACCEL_FAILED):
|
|
return( "CIPHER - Cipher hardware accelerator failed" );
|
|
#endif /* MBEDTLS_CIPHER_C */
|
|
|
|
#if defined(MBEDTLS_DHM_C)
|
|
case -(MBEDTLS_ERR_DHM_BAD_INPUT_DATA):
|
|
return( "DHM - Bad input parameters" );
|
|
case -(MBEDTLS_ERR_DHM_READ_PARAMS_FAILED):
|
|
return( "DHM - Reading of the DHM parameters failed" );
|
|
case -(MBEDTLS_ERR_DHM_MAKE_PARAMS_FAILED):
|
|
return( "DHM - Making of the DHM parameters failed" );
|
|
case -(MBEDTLS_ERR_DHM_READ_PUBLIC_FAILED):
|
|
return( "DHM - Reading of the public values failed" );
|
|
case -(MBEDTLS_ERR_DHM_MAKE_PUBLIC_FAILED):
|
|
return( "DHM - Making of the public value failed" );
|
|
case -(MBEDTLS_ERR_DHM_CALC_SECRET_FAILED):
|
|
return( "DHM - Calculation of the DHM secret failed" );
|
|
case -(MBEDTLS_ERR_DHM_INVALID_FORMAT):
|
|
return( "DHM - The ASN.1 data is not formatted correctly" );
|
|
case -(MBEDTLS_ERR_DHM_ALLOC_FAILED):
|
|
return( "DHM - Allocation of memory failed" );
|
|
case -(MBEDTLS_ERR_DHM_FILE_IO_ERROR):
|
|
return( "DHM - Read or write of file failed" );
|
|
case -(MBEDTLS_ERR_DHM_HW_ACCEL_FAILED):
|
|
return( "DHM - DHM hardware accelerator failed" );
|
|
case -(MBEDTLS_ERR_DHM_SET_GROUP_FAILED):
|
|
return( "DHM - Setting the modulus and generator failed" );
|
|
#endif /* MBEDTLS_DHM_C */
|
|
|
|
#if defined(MBEDTLS_ECP_C)
|
|
case -(MBEDTLS_ERR_ECP_BAD_INPUT_DATA):
|
|
return( "ECP - Bad input parameters to function" );
|
|
case -(MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL):
|
|
return( "ECP - The buffer is too small to write to" );
|
|
case -(MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE):
|
|
return( "ECP - The requested feature is not available, for example, the requested curve is not supported" );
|
|
case -(MBEDTLS_ERR_ECP_VERIFY_FAILED):
|
|
return( "ECP - The signature is not valid" );
|
|
case -(MBEDTLS_ERR_ECP_ALLOC_FAILED):
|
|
return( "ECP - Memory allocation failed" );
|
|
case -(MBEDTLS_ERR_ECP_RANDOM_FAILED):
|
|
return( "ECP - Generation of random value, such as ephemeral key, failed" );
|
|
case -(MBEDTLS_ERR_ECP_INVALID_KEY):
|
|
return( "ECP - Invalid private or public key" );
|
|
case -(MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH):
|
|
return( "ECP - The buffer contains a valid signature followed by more data" );
|
|
case -(MBEDTLS_ERR_ECP_HW_ACCEL_FAILED):
|
|
return( "ECP - The ECP hardware accelerator failed" );
|
|
case -(MBEDTLS_ERR_ECP_IN_PROGRESS):
|
|
return( "ECP - Operation in progress, call again with the same parameters to continue" );
|
|
#endif /* MBEDTLS_ECP_C */
|
|
|
|
#if defined(MBEDTLS_MD_C)
|
|
case -(MBEDTLS_ERR_MD_FEATURE_UNAVAILABLE):
|
|
return( "MD - The selected feature is not available" );
|
|
case -(MBEDTLS_ERR_MD_BAD_INPUT_DATA):
|
|
return( "MD - Bad input parameters to function" );
|
|
case -(MBEDTLS_ERR_MD_ALLOC_FAILED):
|
|
return( "MD - Failed to allocate memory" );
|
|
case -(MBEDTLS_ERR_MD_FILE_IO_ERROR):
|
|
return( "MD - Opening or reading of file failed" );
|
|
case -(MBEDTLS_ERR_MD_HW_ACCEL_FAILED):
|
|
return( "MD - MD hardware accelerator failed" );
|
|
#endif /* MBEDTLS_MD_C */
|
|
|
|
#if defined(MBEDTLS_PEM_PARSE_C) || defined(MBEDTLS_PEM_WRITE_C)
|
|
case -(MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT):
|
|
return( "PEM - No PEM header or footer found" );
|
|
case -(MBEDTLS_ERR_PEM_INVALID_DATA):
|
|
return( "PEM - PEM string is not as expected" );
|
|
case -(MBEDTLS_ERR_PEM_ALLOC_FAILED):
|
|
return( "PEM - Failed to allocate memory" );
|
|
case -(MBEDTLS_ERR_PEM_INVALID_ENC_IV):
|
|
return( "PEM - RSA IV is not in hex-format" );
|
|
case -(MBEDTLS_ERR_PEM_UNKNOWN_ENC_ALG):
|
|
return( "PEM - Unsupported key encryption algorithm" );
|
|
case -(MBEDTLS_ERR_PEM_PASSWORD_REQUIRED):
|
|
return( "PEM - Private key password can't be empty" );
|
|
case -(MBEDTLS_ERR_PEM_PASSWORD_MISMATCH):
|
|
return( "PEM - Given private key password does not allow for correct decryption" );
|
|
case -(MBEDTLS_ERR_PEM_FEATURE_UNAVAILABLE):
|
|
return( "PEM - Unavailable feature, e.g. hashing/encryption combination" );
|
|
case -(MBEDTLS_ERR_PEM_BAD_INPUT_DATA):
|
|
return( "PEM - Bad input parameters to function" );
|
|
#endif /* MBEDTLS_PEM_PARSE_C || MBEDTLS_PEM_WRITE_C */
|
|
|
|
#if defined(MBEDTLS_PK_C)
|
|
case -(MBEDTLS_ERR_PK_ALLOC_FAILED):
|
|
return( "PK - Memory allocation failed" );
|
|
case -(MBEDTLS_ERR_PK_TYPE_MISMATCH):
|
|
return( "PK - Type mismatch, eg attempt to encrypt with an ECDSA key" );
|
|
case -(MBEDTLS_ERR_PK_BAD_INPUT_DATA):
|
|
return( "PK - Bad input parameters to function" );
|
|
case -(MBEDTLS_ERR_PK_FILE_IO_ERROR):
|
|
return( "PK - Read/write of file failed" );
|
|
case -(MBEDTLS_ERR_PK_KEY_INVALID_VERSION):
|
|
return( "PK - Unsupported key version" );
|
|
case -(MBEDTLS_ERR_PK_KEY_INVALID_FORMAT):
|
|
return( "PK - Invalid key tag or value" );
|
|
case -(MBEDTLS_ERR_PK_UNKNOWN_PK_ALG):
|
|
return( "PK - Key algorithm is unsupported (only RSA and EC are supported)" );
|
|
case -(MBEDTLS_ERR_PK_PASSWORD_REQUIRED):
|
|
return( "PK - Private key password can't be empty" );
|
|
case -(MBEDTLS_ERR_PK_PASSWORD_MISMATCH):
|
|
return( "PK - Given private key password does not allow for correct decryption" );
|
|
case -(MBEDTLS_ERR_PK_INVALID_PUBKEY):
|
|
return( "PK - The pubkey tag or value is invalid (only RSA and EC are supported)" );
|
|
case -(MBEDTLS_ERR_PK_INVALID_ALG):
|
|
return( "PK - The algorithm tag or value is invalid" );
|
|
case -(MBEDTLS_ERR_PK_UNKNOWN_NAMED_CURVE):
|
|
return( "PK - Elliptic curve is unsupported (only NIST curves are supported)" );
|
|
case -(MBEDTLS_ERR_PK_FEATURE_UNAVAILABLE):
|
|
return( "PK - Unavailable feature, e.g. RSA disabled for RSA key" );
|
|
case -(MBEDTLS_ERR_PK_SIG_LEN_MISMATCH):
|
|
return( "PK - The buffer contains a valid signature followed by more data" );
|
|
case -(MBEDTLS_ERR_PK_HW_ACCEL_FAILED):
|
|
return( "PK - PK hardware accelerator failed" );
|
|
#endif /* MBEDTLS_PK_C */
|
|
|
|
#if defined(MBEDTLS_PKCS5_C)
|
|
case -(MBEDTLS_ERR_PKCS5_BAD_INPUT_DATA):
|
|
return( "PKCS5 - Bad input parameters to function" );
|
|
case -(MBEDTLS_ERR_PKCS5_INVALID_FORMAT):
|
|
return( "PKCS5 - Unexpected ASN.1 data" );
|
|
case -(MBEDTLS_ERR_PKCS5_FEATURE_UNAVAILABLE):
|
|
return( "PKCS5 - Requested encryption or digest alg not available" );
|
|
case -(MBEDTLS_ERR_PKCS5_PASSWORD_MISMATCH):
|
|
return( "PKCS5 - Given private key password does not allow for correct decryption" );
|
|
#endif /* MBEDTLS_PKCS5_C */
|
|
|
|
#if defined(MBEDTLS_RSA_C)
|
|
case -(MBEDTLS_ERR_RSA_BAD_INPUT_DATA):
|
|
return( "RSA - Bad input parameters to function" );
|
|
case -(MBEDTLS_ERR_RSA_INVALID_PADDING):
|
|
return( "RSA - Input data contains invalid padding and is rejected" );
|
|
case -(MBEDTLS_ERR_RSA_KEY_GEN_FAILED):
|
|
return( "RSA - Something failed during generation of a key" );
|
|
case -(MBEDTLS_ERR_RSA_KEY_CHECK_FAILED):
|
|
return( "RSA - Key failed to pass the validity check of the library" );
|
|
case -(MBEDTLS_ERR_RSA_PUBLIC_FAILED):
|
|
return( "RSA - The public key operation failed" );
|
|
case -(MBEDTLS_ERR_RSA_PRIVATE_FAILED):
|
|
return( "RSA - The private key operation failed" );
|
|
case -(MBEDTLS_ERR_RSA_VERIFY_FAILED):
|
|
return( "RSA - The PKCS#1 verification failed" );
|
|
case -(MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE):
|
|
return( "RSA - The output buffer for decryption is not large enough" );
|
|
case -(MBEDTLS_ERR_RSA_RNG_FAILED):
|
|
return( "RSA - The random generator failed to generate non-zeros" );
|
|
case -(MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION):
|
|
return( "RSA - The implementation does not offer the requested operation, for example, because of security violations or lack of functionality" );
|
|
case -(MBEDTLS_ERR_RSA_HW_ACCEL_FAILED):
|
|
return( "RSA - RSA hardware accelerator failed" );
|
|
#endif /* MBEDTLS_RSA_C */
|
|
|
|
#if defined(MBEDTLS_SSL_TLS_C)
|
|
case -(MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE):
|
|
return( "SSL - The requested feature is not available" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_INPUT_DATA):
|
|
return( "SSL - Bad input parameters to function" );
|
|
case -(MBEDTLS_ERR_SSL_INVALID_MAC):
|
|
return( "SSL - Verification of the message MAC failed" );
|
|
case -(MBEDTLS_ERR_SSL_INVALID_RECORD):
|
|
return( "SSL - An invalid SSL record was received" );
|
|
case -(MBEDTLS_ERR_SSL_CONN_EOF):
|
|
return( "SSL - The connection indicated an EOF" );
|
|
case -(MBEDTLS_ERR_SSL_UNKNOWN_CIPHER):
|
|
return( "SSL - An unknown cipher was received" );
|
|
case -(MBEDTLS_ERR_SSL_NO_CIPHER_CHOSEN):
|
|
return( "SSL - The server has no ciphersuites in common with the client" );
|
|
case -(MBEDTLS_ERR_SSL_NO_RNG):
|
|
return( "SSL - No RNG was provided to the SSL module" );
|
|
case -(MBEDTLS_ERR_SSL_NO_CLIENT_CERTIFICATE):
|
|
return( "SSL - No client certification received from the client, but required by the authentication mode" );
|
|
case -(MBEDTLS_ERR_SSL_CERTIFICATE_TOO_LARGE):
|
|
return( "SSL - Our own certificate(s) is/are too large to send in an SSL message" );
|
|
case -(MBEDTLS_ERR_SSL_CERTIFICATE_REQUIRED):
|
|
return( "SSL - The own certificate is not set, but needed by the server" );
|
|
case -(MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED):
|
|
return( "SSL - The own private key or pre-shared key is not set, but needed" );
|
|
case -(MBEDTLS_ERR_SSL_CA_CHAIN_REQUIRED):
|
|
return( "SSL - No CA Chain is set, but required to operate" );
|
|
case -(MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE):
|
|
return( "SSL - An unexpected message was received from our peer" );
|
|
case -(MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE):
|
|
return( "SSL - A fatal alert message was received from our peer" );
|
|
case -(MBEDTLS_ERR_SSL_PEER_VERIFY_FAILED):
|
|
return( "SSL - Verification of our peer failed" );
|
|
case -(MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY):
|
|
return( "SSL - The peer notified us that the connection is going to be closed" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_CLIENT_HELLO):
|
|
return( "SSL - Processing of the ClientHello handshake message failed" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO):
|
|
return( "SSL - Processing of the ServerHello handshake message failed" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE):
|
|
return( "SSL - Processing of the Certificate handshake message failed" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_REQUEST):
|
|
return( "SSL - Processing of the CertificateRequest handshake message failed" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE):
|
|
return( "SSL - Processing of the ServerKeyExchange handshake message failed" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO_DONE):
|
|
return( "SSL - Processing of the ServerHelloDone handshake message failed" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE):
|
|
return( "SSL - Processing of the ClientKeyExchange handshake message failed" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_RP):
|
|
return( "SSL - Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Read Public" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_CS):
|
|
return( "SSL - Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Calculate Secret" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_VERIFY):
|
|
return( "SSL - Processing of the CertificateVerify handshake message failed" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_CHANGE_CIPHER_SPEC):
|
|
return( "SSL - Processing of the ChangeCipherSpec handshake message failed" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_FINISHED):
|
|
return( "SSL - Processing of the Finished handshake message failed" );
|
|
case -(MBEDTLS_ERR_SSL_ALLOC_FAILED):
|
|
return( "SSL - Memory allocation failed" );
|
|
case -(MBEDTLS_ERR_SSL_HW_ACCEL_FAILED):
|
|
return( "SSL - Hardware acceleration function returned with error" );
|
|
case -(MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH):
|
|
return( "SSL - Hardware acceleration function skipped / left alone data" );
|
|
case -(MBEDTLS_ERR_SSL_COMPRESSION_FAILED):
|
|
return( "SSL - Processing of the compression / decompression failed" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_PROTOCOL_VERSION):
|
|
return( "SSL - Handshake protocol not within min/max boundaries" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_HS_NEW_SESSION_TICKET):
|
|
return( "SSL - Processing of the NewSessionTicket handshake message failed" );
|
|
case -(MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED):
|
|
return( "SSL - Session ticket has expired" );
|
|
case -(MBEDTLS_ERR_SSL_PK_TYPE_MISMATCH):
|
|
return( "SSL - Public key type mismatch (eg, asked for RSA key exchange and presented EC key)" );
|
|
case -(MBEDTLS_ERR_SSL_UNKNOWN_IDENTITY):
|
|
return( "SSL - Unknown identity received (eg, PSK identity)" );
|
|
case -(MBEDTLS_ERR_SSL_INTERNAL_ERROR):
|
|
return( "SSL - Internal error (eg, unexpected failure in lower-level module)" );
|
|
case -(MBEDTLS_ERR_SSL_COUNTER_WRAPPING):
|
|
return( "SSL - A counter would wrap (eg, too many messages exchanged)" );
|
|
case -(MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO):
|
|
return( "SSL - Unexpected message at ServerHello in renegotiation" );
|
|
case -(MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED):
|
|
return( "SSL - DTLS client must retry for hello verification" );
|
|
case -(MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL):
|
|
return( "SSL - A buffer is too small to receive or write a message" );
|
|
case -(MBEDTLS_ERR_SSL_NO_USABLE_CIPHERSUITE):
|
|
return( "SSL - None of the common ciphersuites is usable (eg, no suitable certificate, see debug messages)" );
|
|
case -(MBEDTLS_ERR_SSL_WANT_READ):
|
|
return( "SSL - No data of requested type currently available on underlying transport" );
|
|
case -(MBEDTLS_ERR_SSL_WANT_WRITE):
|
|
return( "SSL - Connection requires a write call" );
|
|
case -(MBEDTLS_ERR_SSL_TIMEOUT):
|
|
return( "SSL - The operation timed out" );
|
|
case -(MBEDTLS_ERR_SSL_CLIENT_RECONNECT):
|
|
return( "SSL - The client initiated a reconnect from the same port" );
|
|
case -(MBEDTLS_ERR_SSL_UNEXPECTED_RECORD):
|
|
return( "SSL - Record header looks valid but is not expected" );
|
|
case -(MBEDTLS_ERR_SSL_NON_FATAL):
|
|
return( "SSL - The alert message received indicates a non-fatal error" );
|
|
case -(MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH):
|
|
return( "SSL - Couldn't set the hash for verifying CertificateVerify" );
|
|
case -(MBEDTLS_ERR_SSL_CONTINUE_PROCESSING):
|
|
return( "SSL - Internal-only message signaling that further message-processing should be done" );
|
|
case -(MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS):
|
|
return( "SSL - The asynchronous operation is not completed yet" );
|
|
case -(MBEDTLS_ERR_SSL_EARLY_MESSAGE):
|
|
return( "SSL - Internal-only message signaling that a message arrived early" );
|
|
case -(MBEDTLS_ERR_SSL_UNEXPECTED_CID):
|
|
return( "SSL - An encrypted DTLS-frame with an unexpected CID was received" );
|
|
case -(MBEDTLS_ERR_SSL_VERSION_MISMATCH):
|
|
return( "SSL - An operation failed due to an unexpected version or configuration" );
|
|
case -(MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS):
|
|
return( "SSL - A cryptographic operation is in progress. Try again later" );
|
|
case -(MBEDTLS_ERR_SSL_BAD_CONFIG):
|
|
return( "SSL - Invalid value in SSL config" );
|
|
#endif /* MBEDTLS_SSL_TLS_C */
|
|
|
|
#if defined(MBEDTLS_X509_USE_C) || defined(MBEDTLS_X509_CREATE_C)
|
|
case -(MBEDTLS_ERR_X509_FEATURE_UNAVAILABLE):
|
|
return( "X509 - Unavailable feature, e.g. RSA hashing/encryption combination" );
|
|
case -(MBEDTLS_ERR_X509_UNKNOWN_OID):
|
|
return( "X509 - Requested OID is unknown" );
|
|
case -(MBEDTLS_ERR_X509_INVALID_FORMAT):
|
|
return( "X509 - The CRT/CRL/CSR format is invalid, e.g. different type expected" );
|
|
case -(MBEDTLS_ERR_X509_INVALID_VERSION):
|
|
return( "X509 - The CRT/CRL/CSR version element is invalid" );
|
|
case -(MBEDTLS_ERR_X509_INVALID_SERIAL):
|
|
return( "X509 - The serial tag or value is invalid" );
|
|
case -(MBEDTLS_ERR_X509_INVALID_ALG):
|
|
return( "X509 - The algorithm tag or value is invalid" );
|
|
case -(MBEDTLS_ERR_X509_INVALID_NAME):
|
|
return( "X509 - The name tag or value is invalid" );
|
|
case -(MBEDTLS_ERR_X509_INVALID_DATE):
|
|
return( "X509 - The date tag or value is invalid" );
|
|
case -(MBEDTLS_ERR_X509_INVALID_SIGNATURE):
|
|
return( "X509 - The signature tag or value invalid" );
|
|
case -(MBEDTLS_ERR_X509_INVALID_EXTENSIONS):
|
|
return( "X509 - The extension tag or value is invalid" );
|
|
case -(MBEDTLS_ERR_X509_UNKNOWN_VERSION):
|
|
return( "X509 - CRT/CRL/CSR has an unsupported version number" );
|
|
case -(MBEDTLS_ERR_X509_UNKNOWN_SIG_ALG):
|
|
return( "X509 - Signature algorithm (oid) is unsupported" );
|
|
case -(MBEDTLS_ERR_X509_SIG_MISMATCH):
|
|
return( "X509 - Signature algorithms do not match. (see \\c ::mbedtls_x509_crt sig_oid)" );
|
|
case -(MBEDTLS_ERR_X509_CERT_VERIFY_FAILED):
|
|
return( "X509 - Certificate verification failed, e.g. CRL, CA or signature check failed" );
|
|
case -(MBEDTLS_ERR_X509_CERT_UNKNOWN_FORMAT):
|
|
return( "X509 - Format not recognized as DER or PEM" );
|
|
case -(MBEDTLS_ERR_X509_BAD_INPUT_DATA):
|
|
return( "X509 - Input invalid" );
|
|
case -(MBEDTLS_ERR_X509_ALLOC_FAILED):
|
|
return( "X509 - Allocation of memory failed" );
|
|
case -(MBEDTLS_ERR_X509_FILE_IO_ERROR):
|
|
return( "X509 - Read/write of file failed" );
|
|
case -(MBEDTLS_ERR_X509_BUFFER_TOO_SMALL):
|
|
return( "X509 - Destination buffer is too small" );
|
|
case -(MBEDTLS_ERR_X509_FATAL_ERROR):
|
|
return( "X509 - A fatal error occurred, eg the chain is too long or the vrfy callback failed" );
|
|
#endif /* MBEDTLS_X509_USE_C || MBEDTLS_X509_CREATE_C */
|
|
/* End Auto-Generated Code. */
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return( NULL );
|
|
}
|
|
|
|
const char * mbedtls_low_level_strerr( int error_code )
|
|
{
|
|
int low_level_error_code;
|
|
|
|
if( error_code < 0 )
|
|
error_code = -error_code;
|
|
|
|
/* Extract the low-level part from the error code. */
|
|
low_level_error_code = error_code & ~0xFF80;
|
|
|
|
switch( low_level_error_code )
|
|
{
|
|
/* Begin Auto-Generated Code. */
|
|
#if defined(MBEDTLS_AES_C)
|
|
case -(MBEDTLS_ERR_AES_INVALID_KEY_LENGTH):
|
|
return( "AES - Invalid key length" );
|
|
case -(MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH):
|
|
return( "AES - Invalid data input length" );
|
|
case -(MBEDTLS_ERR_AES_BAD_INPUT_DATA):
|
|
return( "AES - Invalid input data" );
|
|
case -(MBEDTLS_ERR_AES_FEATURE_UNAVAILABLE):
|
|
return( "AES - Feature not available. For example, an unsupported AES key size" );
|
|
case -(MBEDTLS_ERR_AES_HW_ACCEL_FAILED):
|
|
return( "AES - AES hardware accelerator failed" );
|
|
#endif /* MBEDTLS_AES_C */
|
|
|
|
#if defined(MBEDTLS_ASN1_PARSE_C)
|
|
case -(MBEDTLS_ERR_ASN1_OUT_OF_DATA):
|
|
return( "ASN1 - Out of data when parsing an ASN1 data structure" );
|
|
case -(MBEDTLS_ERR_ASN1_UNEXPECTED_TAG):
|
|
return( "ASN1 - ASN1 tag was of an unexpected value" );
|
|
case -(MBEDTLS_ERR_ASN1_INVALID_LENGTH):
|
|
return( "ASN1 - Error when trying to determine the length or invalid length" );
|
|
case -(MBEDTLS_ERR_ASN1_LENGTH_MISMATCH):
|
|
return( "ASN1 - Actual length differs from expected length" );
|
|
case -(MBEDTLS_ERR_ASN1_INVALID_DATA):
|
|
return( "ASN1 - Data is invalid" );
|
|
case -(MBEDTLS_ERR_ASN1_ALLOC_FAILED):
|
|
return( "ASN1 - Memory allocation failed" );
|
|
case -(MBEDTLS_ERR_ASN1_BUF_TOO_SMALL):
|
|
return( "ASN1 - Buffer too small when writing ASN.1 data structure" );
|
|
#endif /* MBEDTLS_ASN1_PARSE_C */
|
|
|
|
#if defined(MBEDTLS_BASE64_C)
|
|
case -(MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL):
|
|
return( "BASE64 - Output buffer too small" );
|
|
case -(MBEDTLS_ERR_BASE64_INVALID_CHARACTER):
|
|
return( "BASE64 - Invalid character in input" );
|
|
#endif /* MBEDTLS_BASE64_C */
|
|
|
|
#if defined(MBEDTLS_BIGNUM_C)
|
|
case -(MBEDTLS_ERR_MPI_FILE_IO_ERROR):
|
|
return( "BIGNUM - An error occurred while reading from or writing to a file" );
|
|
case -(MBEDTLS_ERR_MPI_BAD_INPUT_DATA):
|
|
return( "BIGNUM - Bad input parameters to function" );
|
|
case -(MBEDTLS_ERR_MPI_INVALID_CHARACTER):
|
|
return( "BIGNUM - There is an invalid character in the digit string" );
|
|
case -(MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL):
|
|
return( "BIGNUM - The buffer is too small to write to" );
|
|
case -(MBEDTLS_ERR_MPI_NEGATIVE_VALUE):
|
|
return( "BIGNUM - The input arguments are negative or result in illegal output" );
|
|
case -(MBEDTLS_ERR_MPI_DIVISION_BY_ZERO):
|
|
return( "BIGNUM - The input argument for division is zero, which is not allowed" );
|
|
case -(MBEDTLS_ERR_MPI_NOT_ACCEPTABLE):
|
|
return( "BIGNUM - The input arguments are not acceptable" );
|
|
case -(MBEDTLS_ERR_MPI_ALLOC_FAILED):
|
|
return( "BIGNUM - Memory allocation failed" );
|
|
#endif /* MBEDTLS_BIGNUM_C */
|
|
|
|
#if defined(MBEDTLS_CCM_C)
|
|
case -(MBEDTLS_ERR_CCM_BAD_INPUT):
|
|
return( "CCM - Bad input parameters to the function" );
|
|
case -(MBEDTLS_ERR_CCM_AUTH_FAILED):
|
|
return( "CCM - Authenticated decryption failed" );
|
|
case -(MBEDTLS_ERR_CCM_HW_ACCEL_FAILED):
|
|
return( "CCM - CCM hardware accelerator failed" );
|
|
#endif /* MBEDTLS_CCM_C */
|
|
|
|
#if defined(MBEDTLS_CHACHA20_C)
|
|
case -(MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA):
|
|
return( "CHACHA20 - Invalid input parameter(s)" );
|
|
#endif /* MBEDTLS_CHACHA20_C */
|
|
|
|
#if defined(MBEDTLS_CHACHAPOLY_C)
|
|
case -(MBEDTLS_ERR_CHACHAPOLY_BAD_STATE):
|
|
return( "CHACHAPOLY - The requested operation is not permitted in the current state" );
|
|
case -(MBEDTLS_ERR_CHACHAPOLY_AUTH_FAILED):
|
|
return( "CHACHAPOLY - Authenticated decryption failed: data was not authentic" );
|
|
#endif /* MBEDTLS_CHACHAPOLY_C */
|
|
|
|
#if defined(MBEDTLS_CMAC_C)
|
|
case -(MBEDTLS_ERR_CMAC_HW_ACCEL_FAILED):
|
|
return( "CMAC - CMAC hardware accelerator failed" );
|
|
#endif /* MBEDTLS_CMAC_C */
|
|
|
|
#if defined(MBEDTLS_CTR_DRBG_C)
|
|
case -(MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED):
|
|
return( "CTR_DRBG - The entropy source failed" );
|
|
case -(MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG):
|
|
return( "CTR_DRBG - The requested random buffer length is too big" );
|
|
case -(MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG):
|
|
return( "CTR_DRBG - The input (entropy + additional data) is too large" );
|
|
case -(MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR):
|
|
return( "CTR_DRBG - Read or write error in file" );
|
|
#endif /* MBEDTLS_CTR_DRBG_C */
|
|
|
|
#if defined(MBEDTLS_DES_C)
|
|
case -(MBEDTLS_ERR_DES_INVALID_INPUT_LENGTH):
|
|
return( "DES - The data input has an invalid length" );
|
|
case -(MBEDTLS_ERR_DES_HW_ACCEL_FAILED):
|
|
return( "DES - DES hardware accelerator failed" );
|
|
#endif /* MBEDTLS_DES_C */
|
|
|
|
#if defined(MBEDTLS_ENTROPY_C)
|
|
case -(MBEDTLS_ERR_ENTROPY_SOURCE_FAILED):
|
|
return( "ENTROPY - Critical entropy source failure" );
|
|
case -(MBEDTLS_ERR_ENTROPY_MAX_SOURCES):
|
|
return( "ENTROPY - No more sources can be added" );
|
|
case -(MBEDTLS_ERR_ENTROPY_NO_SOURCES_DEFINED):
|
|
return( "ENTROPY - No sources have been added to poll" );
|
|
case -(MBEDTLS_ERR_ENTROPY_NO_STRONG_SOURCE):
|
|
return( "ENTROPY - No strong sources have been added to poll" );
|
|
case -(MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR):
|
|
return( "ENTROPY - Read/write error in file" );
|
|
#endif /* MBEDTLS_ENTROPY_C */
|
|
|
|
#if defined(MBEDTLS_ERROR_C)
|
|
case -(MBEDTLS_ERR_ERROR_GENERIC_ERROR):
|
|
return( "ERROR - Generic error" );
|
|
case -(MBEDTLS_ERR_THIS_CORRUPTION):
|
|
return( "ERROR - This is a bug in the library" );
|
|
#endif /* MBEDTLS_ERROR_C */
|
|
|
|
#if defined(MBEDTLS_GCM_C)
|
|
case -(MBEDTLS_ERR_GCM_AUTH_FAILED):
|
|
return( "GCM - Authenticated decryption failed" );
|
|
case -(MBEDTLS_ERR_GCM_BAD_INPUT):
|
|
return( "GCM - Bad input parameters to function" );
|
|
#endif /* MBEDTLS_GCM_C */
|
|
|
|
#if defined(MBEDTLS_HKDF_C)
|
|
case -(MBEDTLS_ERR_HKDF_BAD_INPUT_DATA):
|
|
return( "HKDF - Bad input parameters to function" );
|
|
#endif /* MBEDTLS_HKDF_C */
|
|
|
|
#if defined(MBEDTLS_HMAC_DRBG_C)
|
|
case -(MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG):
|
|
return( "HMAC_DRBG - Too many random requested in single call" );
|
|
case -(MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG):
|
|
return( "HMAC_DRBG - Input too large (Entropy + additional)" );
|
|
case -(MBEDTLS_ERR_HMAC_DRBG_FILE_IO_ERROR):
|
|
return( "HMAC_DRBG - Read/write error in file" );
|
|
case -(MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED):
|
|
return( "HMAC_DRBG - The entropy source failed" );
|
|
#endif /* MBEDTLS_HMAC_DRBG_C */
|
|
|
|
#if defined(MBEDTLS_MD5_C)
|
|
case -(MBEDTLS_ERR_MD5_HW_ACCEL_FAILED):
|
|
return( "MD5 - MD5 hardware accelerator failed" );
|
|
#endif /* MBEDTLS_MD5_C */
|
|
|
|
#if defined(MBEDTLS_OID_C)
|
|
case -(MBEDTLS_ERR_OID_NOT_FOUND):
|
|
return( "OID - OID is not found" );
|
|
case -(MBEDTLS_ERR_OID_BUF_TOO_SMALL):
|
|
return( "OID - output buffer is too small" );
|
|
#endif /* MBEDTLS_OID_C */
|
|
|
|
#if defined(MBEDTLS_PADLOCK_C)
|
|
case -(MBEDTLS_ERR_PADLOCK_DATA_MISALIGNED):
|
|
return( "PADLOCK - Input data should be aligned" );
|
|
#endif /* MBEDTLS_PADLOCK_C */
|
|
|
|
#if defined(MBEDTLS_POLY1305_C)
|
|
case -(MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA):
|
|
return( "POLY1305 - Invalid input parameter(s)" );
|
|
case -(MBEDTLS_ERR_POLY1305_FEATURE_UNAVAILABLE):
|
|
return( "POLY1305 - Feature not available. For example, s part of the API is not implemented" );
|
|
case -(MBEDTLS_ERR_POLY1305_HW_ACCEL_FAILED):
|
|
return( "POLY1305 - Poly1305 hardware accelerator failed" );
|
|
#endif /* MBEDTLS_POLY1305_C */
|
|
|
|
#if defined(MBEDTLS_SHA1_C)
|
|
case -(MBEDTLS_ERR_SHA1_HW_ACCEL_FAILED):
|
|
return( "SHA1 - SHA-1 hardware accelerator failed" );
|
|
case -(MBEDTLS_ERR_SHA1_BAD_INPUT_DATA):
|
|
return( "SHA1 - SHA-1 input data was malformed" );
|
|
#endif /* MBEDTLS_SHA1_C */
|
|
|
|
#if defined(MBEDTLS_SHA256_C)
|
|
case -(MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED):
|
|
return( "SHA256 - SHA-256 hardware accelerator failed" );
|
|
case -(MBEDTLS_ERR_SHA256_BAD_INPUT_DATA):
|
|
return( "SHA256 - SHA-256 input data was malformed" );
|
|
#endif /* MBEDTLS_SHA256_C */
|
|
|
|
#if defined(MBEDTLS_SHA512_C)
|
|
case -(MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED):
|
|
return( "SHA512 - SHA-512 hardware accelerator failed" );
|
|
case -(MBEDTLS_ERR_SHA512_BAD_INPUT_DATA):
|
|
return( "SHA512 - SHA-512 input data was malformed" );
|
|
#endif /* MBEDTLS_SHA512_C */
|
|
|
|
/* End Auto-Generated Code. */
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return( NULL );
|
|
}
|
|
|
|
void mbedtls_strerror( int ret, char *buf, size_t buflen )
|
|
{
|
|
size_t len;
|
|
int use_ret;
|
|
const char * high_level_error_description = NULL;
|
|
const char * low_level_error_description = NULL;
|
|
|
|
if( buflen == 0 )
|
|
return;
|
|
|
|
mbedtls_platform_zeroize( buf, buflen );
|
|
|
|
if( ret < 0 )
|
|
ret = -ret;
|
|
|
|
if( ret & 0xFF80 )
|
|
{
|
|
use_ret = ret & 0xFF80;
|
|
|
|
// Translate high level error code.
|
|
high_level_error_description = mbedtls_high_level_strerr( ret );
|
|
|
|
if( high_level_error_description == NULL )
|
|
mbedtls_snprintf( buf, buflen, "UNKNOWN ERROR CODE (%04X)", (unsigned int) use_ret );
|
|
else
|
|
mbedtls_snprintf( buf, buflen, "%s", high_level_error_description );
|
|
|
|
#if defined(MBEDTLS_SSL_TLS_C)
|
|
// Early return in case of a fatal error - do not try to translate low
|
|
// level code.
|
|
if(use_ret == -(MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE))
|
|
return;
|
|
#endif /* MBEDTLS_SSL_TLS_C */
|
|
}
|
|
|
|
use_ret = ret & ~0xFF80;
|
|
|
|
if( use_ret == 0 )
|
|
return;
|
|
|
|
// If high level code is present, make a concatenation between both
|
|
// error strings.
|
|
//
|
|
len = strlen( buf );
|
|
|
|
if( len > 0 )
|
|
{
|
|
if( buflen - len < 5 )
|
|
return;
|
|
|
|
mbedtls_snprintf( buf + len, buflen - len, " : " );
|
|
|
|
buf += len + 3;
|
|
buflen -= len + 3;
|
|
}
|
|
|
|
// Translate low level error code.
|
|
low_level_error_description = mbedtls_low_level_strerr( ret );
|
|
|
|
if( low_level_error_description == NULL )
|
|
mbedtls_snprintf( buf, buflen, "UNKNOWN ERROR CODE (%04X)", (unsigned int) use_ret );
|
|
else
|
|
mbedtls_snprintf( buf, buflen, "%s", low_level_error_description );
|
|
}
|
|
|
|
#else /* MBEDTLS_ERROR_C */
|
|
|
|
/*
|
|
* Provide an non-function in case MBEDTLS_ERROR_C is not defined
|
|
*/
|
|
void mbedtls_strerror( int ret, char *buf, size_t buflen )
|
|
{
|
|
((void) ret);
|
|
|
|
if( buflen > 0 )
|
|
buf[0] = '\0';
|
|
}
|
|
|
|
#endif /* MBEDTLS_ERROR_C */
|
|
|
|
#endif /* MBEDTLS_ERROR_C || MBEDTLS_ERROR_STRERROR_DUMMY */
|