linux-stable/fs/quota/dquot.c

3054 lines
82 KiB
C
Raw Permalink Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Implementation of the diskquota system for the LINUX operating system. QUOTA
* is implemented using the BSD system call interface as the means of
* communication with the user level. This file contains the generic routines
* called by the different filesystems on allocation of an inode or block.
* These routines take care of the administration needed to have a consistent
* diskquota tracking system. The ideas of both user and group quotas are based
* on the Melbourne quota system as used on BSD derived systems. The internal
* implementation is based on one of the several variants of the LINUX
* inode-subsystem with added complexity of the diskquota system.
*
* Author: Marco van Wieringen <mvw@planets.elm.net>
*
* Fixes: Dmitry Gorodchanin <pgmdsg@ibi.com>, 11 Feb 96
*
* Revised list management to avoid races
* -- Bill Hawes, <whawes@star.net>, 9/98
*
* Fixed races in dquot_transfer(), dqget() and dquot_alloc_...().
* As the consequence the locking was moved from dquot_decr_...(),
* dquot_incr_...() to calling functions.
* invalidate_dquots() now writes modified dquots.
* Serialized quota_off() and quota_on() for mount point.
* Fixed a few bugs in grow_dquots().
* Fixed deadlock in write_dquot() - we no longer account quotas on
* quota files
* remove_dquot_ref() moved to inode.c - it now traverses through inodes
* add_dquot_ref() restarts after blocking
* Added check for bogus uid and fixed check for group in quotactl.
* Jan Kara, <jack@suse.cz>, sponsored by SuSE CR, 10-11/99
*
* Used struct list_head instead of own list struct
* Invalidation of referenced dquots is no longer possible
* Improved free_dquots list management
* Quota and i_blocks are now updated in one place to avoid races
* Warnings are now delayed so we won't block in critical section
* Write updated not to require dquot lock
* Jan Kara, <jack@suse.cz>, 9/2000
*
* Added dynamic quota structure allocation
* Jan Kara <jack@suse.cz> 12/2000
*
* Rewritten quota interface. Implemented new quota format and
* formats registering.
* Jan Kara, <jack@suse.cz>, 2001,2002
*
* New SMP locking.
* Jan Kara, <jack@suse.cz>, 10/2002
*
* Added journalled quota support, fix lock inversion problems
* Jan Kara, <jack@suse.cz>, 2003,2004
*
* (C) Copyright 1994 - 1997 Marco van Wieringen
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/mount.h>
#include <linux/mm.h>
#include <linux/time.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/stat.h>
#include <linux/tty.h>
#include <linux/file.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/security.h>
#include <linux/sched.h>
#include <linux/cred.h>
#include <linux/kmod.h>
#include <linux/namei.h>
#include <linux/capability.h>
#include <linux/quotaops.h>
#include <linux/blkdev.h>
#include <linux/sched/mm.h>
#include "../internal.h" /* ugh */
#include <linux/uaccess.h>
/*
* There are five quota SMP locks:
* * dq_list_lock protects all lists with quotas and quota formats.
* * dquot->dq_dqb_lock protects data from dq_dqb
* * inode->i_lock protects inode->i_blocks, i_bytes and also guards
* consistency of dquot->dq_dqb with inode->i_blocks, i_bytes so that
* dquot_transfer() can stabilize amount it transfers
* * dq_data_lock protects mem_dqinfo structures and modifications of dquot
* pointers in the inode
* * dq_state_lock protects modifications of quota state (on quotaon and
* quotaoff) and readers who care about latest values take it as well.
*
* The spinlock ordering is hence:
* dq_data_lock > dq_list_lock > i_lock > dquot->dq_dqb_lock,
* dq_list_lock > dq_state_lock
*
* Note that some things (eg. sb pointer, type, id) doesn't change during
* the life of the dquot structure and so needn't to be protected by a lock
*
* Operation accessing dquots via inode pointers are protected by dquot_srcu.
* Operation of reading pointer needs srcu_read_lock(&dquot_srcu), and
* synchronize_srcu(&dquot_srcu) is called after clearing pointers from
* inode and before dropping dquot references to avoid use of dquots after
* they are freed. dq_data_lock is used to serialize the pointer setting and
* clearing operations.
* Special care needs to be taken about S_NOQUOTA inode flag (marking that
* inode is a quota file). Functions adding pointers from inode to dquots have
* to check this flag under dq_data_lock and then (if S_NOQUOTA is not set) they
* have to do all pointer modifications before dropping dq_data_lock. This makes
* sure they cannot race with quotaon which first sets S_NOQUOTA flag and
* then drops all pointers to dquots from an inode.
*
* Each dquot has its dq_lock mutex. Dquot is locked when it is being read to
* memory (or space for it is being allocated) on the first dqget(), when it is
* being written out, and when it is being released on the last dqput(). The
* allocation and release operations are serialized by the dq_lock and by
* checking the use count in dquot_release().
*
* Lock ordering (including related VFS locks) is the following:
* s_umount > i_mutex > journal_lock > dquot->dq_lock > dqio_sem
*/
static __cacheline_aligned_in_smp DEFINE_SPINLOCK(dq_list_lock);
static __cacheline_aligned_in_smp DEFINE_SPINLOCK(dq_state_lock);
__cacheline_aligned_in_smp DEFINE_SPINLOCK(dq_data_lock);
EXPORT_SYMBOL(dq_data_lock);
DEFINE_STATIC_SRCU(dquot_srcu);
static DECLARE_WAIT_QUEUE_HEAD(dquot_ref_wq);
void __quota_error(struct super_block *sb, const char *func,
const char *fmt, ...)
{
if (printk_ratelimit()) {
va_list args;
struct va_format vaf;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_ERR "Quota error (device %s): %s: %pV\n",
sb->s_id, func, &vaf);
va_end(args);
}
}
EXPORT_SYMBOL(__quota_error);
#if defined(CONFIG_QUOTA_DEBUG) || defined(CONFIG_PRINT_QUOTA_WARNING)
static char *quotatypes[] = INITQFNAMES;
#endif
static struct quota_format_type *quota_formats; /* List of registered formats */
static struct quota_module_name module_names[] = INIT_QUOTA_MODULE_NAMES;
/* SLAB cache for dquot structures */
static struct kmem_cache *dquot_cachep;
int register_quota_format(struct quota_format_type *fmt)
{
spin_lock(&dq_list_lock);
fmt->qf_next = quota_formats;
quota_formats = fmt;
spin_unlock(&dq_list_lock);
return 0;
}
EXPORT_SYMBOL(register_quota_format);
void unregister_quota_format(struct quota_format_type *fmt)
{
struct quota_format_type **actqf;
spin_lock(&dq_list_lock);
for (actqf = &quota_formats; *actqf && *actqf != fmt;
actqf = &(*actqf)->qf_next)
;
if (*actqf)
*actqf = (*actqf)->qf_next;
spin_unlock(&dq_list_lock);
}
EXPORT_SYMBOL(unregister_quota_format);
static struct quota_format_type *find_quota_format(int id)
{
struct quota_format_type *actqf;
spin_lock(&dq_list_lock);
for (actqf = quota_formats; actqf && actqf->qf_fmt_id != id;
actqf = actqf->qf_next)
;
if (!actqf || !try_module_get(actqf->qf_owner)) {
int qm;
spin_unlock(&dq_list_lock);
for (qm = 0; module_names[qm].qm_fmt_id &&
module_names[qm].qm_fmt_id != id; qm++)
;
if (!module_names[qm].qm_fmt_id ||
request_module(module_names[qm].qm_mod_name))
return NULL;
spin_lock(&dq_list_lock);
for (actqf = quota_formats; actqf && actqf->qf_fmt_id != id;
actqf = actqf->qf_next)
;
if (actqf && !try_module_get(actqf->qf_owner))
actqf = NULL;
}
spin_unlock(&dq_list_lock);
return actqf;
}
static void put_quota_format(struct quota_format_type *fmt)
{
module_put(fmt->qf_owner);
}
/*
* Dquot List Management:
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
* The quota code uses five lists for dquot management: the inuse_list,
* releasing_dquots, free_dquots, dqi_dirty_list, and dquot_hash[] array.
* A single dquot structure may be on some of those lists, depending on
* its current state.
*
* All dquots are placed to the end of inuse_list when first created, and this
* list is used for invalidate operation, which must look at every dquot.
*
* When the last reference of a dquot is dropped, the dquot is added to
* releasing_dquots. We'll then queue work item which will call
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
* synchronize_srcu() and after that perform the final cleanup of all the
* dquots on the list. Each cleaned up dquot is moved to free_dquots list.
* Both releasing_dquots and free_dquots use the dq_free list_head in the dquot
* struct.
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
*
* Unused and cleaned up dquots are in the free_dquots list and this list is
* searched whenever we need an available dquot. Dquots are removed from the
* list as soon as they are used again and dqstats.free_dquots gives the number
* of dquots on the list. When dquot is invalidated it's completely released
* from memory.
*
* Dirty dquots are added to the dqi_dirty_list of quota_info when mark
* dirtied, and this list is searched when writing dirty dquots back to
* quota file. Note that some filesystems do dirty dquot tracking on their
* own (e.g. in a journal) and thus don't use dqi_dirty_list.
*
* Dquots with a specific identity (device, type and id) are placed on
* one of the dquot_hash[] hash chains. The provides an efficient search
* mechanism to locate a specific dquot.
*/
static LIST_HEAD(inuse_list);
static LIST_HEAD(free_dquots);
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
static LIST_HEAD(releasing_dquots);
static unsigned int dq_hash_bits, dq_hash_mask;
static struct hlist_head *dquot_hash;
struct dqstats dqstats;
EXPORT_SYMBOL(dqstats);
static qsize_t inode_get_rsv_space(struct inode *inode);
static qsize_t __inode_get_rsv_space(struct inode *inode);
static int __dquot_initialize(struct inode *inode, int type);
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
static void quota_release_workfn(struct work_struct *work);
static DECLARE_DELAYED_WORK(quota_release_work, quota_release_workfn);
static inline unsigned int
hashfn(const struct super_block *sb, struct kqid qid)
{
unsigned int id = from_kqid(&init_user_ns, qid);
int type = qid.type;
unsigned long tmp;
tmp = (((unsigned long)sb>>L1_CACHE_SHIFT) ^ id) * (MAXQUOTAS - type);
return (tmp + (tmp >> dq_hash_bits)) & dq_hash_mask;
}
/*
* Following list functions expect dq_list_lock to be held
*/
static inline void insert_dquot_hash(struct dquot *dquot)
{
struct hlist_head *head;
head = dquot_hash + hashfn(dquot->dq_sb, dquot->dq_id);
hlist_add_head(&dquot->dq_hash, head);
}
static inline void remove_dquot_hash(struct dquot *dquot)
{
hlist_del_init(&dquot->dq_hash);
}
static struct dquot *find_dquot(unsigned int hashent, struct super_block *sb,
struct kqid qid)
{
struct dquot *dquot;
hlist_for_each_entry(dquot, dquot_hash+hashent, dq_hash)
if (dquot->dq_sb == sb && qid_eq(dquot->dq_id, qid))
return dquot;
return NULL;
}
/* Add a dquot to the tail of the free list */
static inline void put_dquot_last(struct dquot *dquot)
{
list_add_tail(&dquot->dq_free, &free_dquots);
dqstats_inc(DQST_FREE_DQUOTS);
}
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
static inline void put_releasing_dquots(struct dquot *dquot)
{
list_add_tail(&dquot->dq_free, &releasing_dquots);
set_bit(DQ_RELEASING_B, &dquot->dq_flags);
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
}
static inline void remove_free_dquot(struct dquot *dquot)
{
if (list_empty(&dquot->dq_free))
return;
list_del_init(&dquot->dq_free);
if (!test_bit(DQ_RELEASING_B, &dquot->dq_flags))
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
dqstats_dec(DQST_FREE_DQUOTS);
else
clear_bit(DQ_RELEASING_B, &dquot->dq_flags);
}
static inline void put_inuse(struct dquot *dquot)
{
/* We add to the back of inuse list so we don't have to restart
* when traversing this list and we block */
list_add_tail(&dquot->dq_inuse, &inuse_list);
dqstats_inc(DQST_ALLOC_DQUOTS);
}
static inline void remove_inuse(struct dquot *dquot)
{
dqstats_dec(DQST_ALLOC_DQUOTS);
list_del(&dquot->dq_inuse);
}
/*
* End of list functions needing dq_list_lock
*/
static void wait_on_dquot(struct dquot *dquot)
{
mutex_lock(&dquot->dq_lock);
mutex_unlock(&dquot->dq_lock);
}
static inline int dquot_active(struct dquot *dquot)
{
return test_bit(DQ_ACTIVE_B, &dquot->dq_flags);
}
static inline int dquot_dirty(struct dquot *dquot)
{
return test_bit(DQ_MOD_B, &dquot->dq_flags);
}
static inline int mark_dquot_dirty(struct dquot *dquot)
{
return dquot->dq_sb->dq_op->mark_dirty(dquot);
}
/* Mark dquot dirty in atomic manner, and return it's old dirty flag state */
int dquot_mark_dquot_dirty(struct dquot *dquot)
{
int ret = 1;
if (!dquot_active(dquot))
return 0;
if (sb_dqopt(dquot->dq_sb)->flags & DQUOT_NOLIST_DIRTY)
return test_and_set_bit(DQ_MOD_B, &dquot->dq_flags);
/* If quota is dirty already, we don't have to acquire dq_list_lock */
if (dquot_dirty(dquot))
return 1;
spin_lock(&dq_list_lock);
if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) {
list_add(&dquot->dq_dirty, &sb_dqopt(dquot->dq_sb)->
info[dquot->dq_id.type].dqi_dirty_list);
ret = 0;
}
spin_unlock(&dq_list_lock);
return ret;
}
EXPORT_SYMBOL(dquot_mark_dquot_dirty);
/* Dirtify all the dquots - this can block when journalling */
static inline int mark_all_dquot_dirty(struct dquot __rcu * const *dquots)
{
int ret, err, cnt;
struct dquot *dquot;
ret = err = 0;
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
if (dquot)
/* Even in case of error we have to continue */
ret = mark_dquot_dirty(dquot);
if (!err && ret < 0)
err = ret;
}
return err;
}
static inline void dqput_all(struct dquot **dquot)
{
unsigned int cnt;
for (cnt = 0; cnt < MAXQUOTAS; cnt++)
dqput(dquot[cnt]);
}
static inline int clear_dquot_dirty(struct dquot *dquot)
{
if (sb_dqopt(dquot->dq_sb)->flags & DQUOT_NOLIST_DIRTY)
return test_and_clear_bit(DQ_MOD_B, &dquot->dq_flags);
spin_lock(&dq_list_lock);
if (!test_and_clear_bit(DQ_MOD_B, &dquot->dq_flags)) {
spin_unlock(&dq_list_lock);
return 0;
}
list_del_init(&dquot->dq_dirty);
spin_unlock(&dq_list_lock);
return 1;
}
void mark_info_dirty(struct super_block *sb, int type)
{
spin_lock(&dq_data_lock);
sb_dqopt(sb)->info[type].dqi_flags |= DQF_INFO_DIRTY;
spin_unlock(&dq_data_lock);
}
EXPORT_SYMBOL(mark_info_dirty);
/*
* Read dquot from disk and alloc space for it
*/
int dquot_acquire(struct dquot *dquot)
{
int ret = 0, ret2 = 0;
unsigned int memalloc;
struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
mutex_lock(&dquot->dq_lock);
memalloc = memalloc_nofs_save();
if (!test_bit(DQ_READ_B, &dquot->dq_flags)) {
ret = dqopt->ops[dquot->dq_id.type]->read_dqblk(dquot);
if (ret < 0)
goto out_iolock;
}
/* Make sure flags update is visible after dquot has been filled */
smp_mb__before_atomic();
set_bit(DQ_READ_B, &dquot->dq_flags);
/* Instantiate dquot if needed */
if (!dquot_active(dquot) && !dquot->dq_off) {
ret = dqopt->ops[dquot->dq_id.type]->commit_dqblk(dquot);
/* Write the info if needed */
if (info_dirty(&dqopt->info[dquot->dq_id.type])) {
ret2 = dqopt->ops[dquot->dq_id.type]->write_file_info(
dquot->dq_sb, dquot->dq_id.type);
}
if (ret < 0)
goto out_iolock;
if (ret2 < 0) {
ret = ret2;
goto out_iolock;
}
}
/*
* Make sure flags update is visible after on-disk struct has been
* allocated. Paired with smp_rmb() in dqget().
*/
smp_mb__before_atomic();
set_bit(DQ_ACTIVE_B, &dquot->dq_flags);
out_iolock:
memalloc_nofs_restore(memalloc);
mutex_unlock(&dquot->dq_lock);
return ret;
}
EXPORT_SYMBOL(dquot_acquire);
/*
* Write dquot to disk
*/
int dquot_commit(struct dquot *dquot)
{
int ret = 0;
unsigned int memalloc;
struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
mutex_lock(&dquot->dq_lock);
memalloc = memalloc_nofs_save();
if (!clear_dquot_dirty(dquot))
goto out_lock;
/* Inactive dquot can be only if there was error during read/init
* => we have better not writing it */
if (dquot_active(dquot))
ret = dqopt->ops[dquot->dq_id.type]->commit_dqblk(dquot);
else
ret = -EIO;
out_lock:
memalloc_nofs_restore(memalloc);
mutex_unlock(&dquot->dq_lock);
return ret;
}
EXPORT_SYMBOL(dquot_commit);
/*
* Release dquot
*/
int dquot_release(struct dquot *dquot)
{
int ret = 0, ret2 = 0;
unsigned int memalloc;
struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
mutex_lock(&dquot->dq_lock);
memalloc = memalloc_nofs_save();
/* Check whether we are not racing with some other dqget() */
if (dquot_is_busy(dquot))
goto out_dqlock;
if (dqopt->ops[dquot->dq_id.type]->release_dqblk) {
ret = dqopt->ops[dquot->dq_id.type]->release_dqblk(dquot);
/* Write the info */
if (info_dirty(&dqopt->info[dquot->dq_id.type])) {
ret2 = dqopt->ops[dquot->dq_id.type]->write_file_info(
dquot->dq_sb, dquot->dq_id.type);
}
if (ret >= 0)
ret = ret2;
}
clear_bit(DQ_ACTIVE_B, &dquot->dq_flags);
out_dqlock:
memalloc_nofs_restore(memalloc);
mutex_unlock(&dquot->dq_lock);
return ret;
}
EXPORT_SYMBOL(dquot_release);
void dquot_destroy(struct dquot *dquot)
{
kmem_cache_free(dquot_cachep, dquot);
}
EXPORT_SYMBOL(dquot_destroy);
static inline void do_destroy_dquot(struct dquot *dquot)
{
dquot->dq_sb->dq_op->destroy_dquot(dquot);
}
/* Invalidate all dquots on the list. Note that this function is called after
* quota is disabled and pointers from inodes removed so there cannot be new
* quota users. There can still be some users of quotas due to inodes being
* just deleted or pruned by prune_icache() (those are not attached to any
* list) or parallel quotactl call. We have to wait for such users.
*/
static void invalidate_dquots(struct super_block *sb, int type)
{
struct dquot *dquot, *tmp;
restart:
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
flush_delayed_work(&quota_release_work);
spin_lock(&dq_list_lock);
list_for_each_entry_safe(dquot, tmp, &inuse_list, dq_inuse) {
if (dquot->dq_sb != sb)
continue;
if (dquot->dq_id.type != type)
continue;
/* Wait for dquot users */
if (atomic_read(&dquot->dq_count)) {
quota: fix warning in dqgrab() There's issue as follows when do fault injection: WARNING: CPU: 1 PID: 14870 at include/linux/quotaops.h:51 dquot_disable+0x13b7/0x18c0 Modules linked in: CPU: 1 PID: 14870 Comm: fsconfig Not tainted 6.3.0-next-20230505-00006-g5107a9c821af-dirty #541 RIP: 0010:dquot_disable+0x13b7/0x18c0 RSP: 0018:ffffc9000acc79e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88825e41b980 RDX: 0000000000000000 RSI: ffff88825e41b980 RDI: 0000000000000002 RBP: ffff888179f68000 R08: ffffffff82087ca7 R09: 0000000000000000 R10: 0000000000000001 R11: ffffed102f3ed026 R12: ffff888179f68130 R13: ffff888179f68110 R14: dffffc0000000000 R15: ffff888179f68118 FS: 00007f450a073740(0000) GS:ffff88882fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe96f2efd8 CR3: 000000025c8ad000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dquot_load_quota_sb+0xd53/0x1060 dquot_resume+0x172/0x230 ext4_reconfigure+0x1dc6/0x27b0 reconfigure_super+0x515/0xa90 __x64_sys_fsconfig+0xb19/0xd20 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Above issue may happens as follows: ProcessA ProcessB ProcessC sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_suspend -> suspend all type quota sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_resume ret = dquot_load_quota_sb add_dquot_ref do_open -> open file O_RDWR vfs_open do_dentry_open get_write_access atomic_inc_unless_negative(&inode->i_writecount) ext4_file_open dquot_file_open dquot_initialize __dquot_initialize dqget atomic_inc(&dquot->dq_count); __dquot_initialize __dquot_initialize dqget if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) ext4_acquire_dquot -> Return error DQ_ACTIVE_B flag isn't set dquot_disable invalidate_dquots if (atomic_read(&dquot->dq_count)) dqgrab WARN_ON_ONCE(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) -> Trigger warning In the above scenario, 'dquot->dq_flags' has no DQ_ACTIVE_B is normal when dqgrab(). To solve above issue just replace the dqgrab() use in invalidate_dquots() with atomic_inc(&dquot->dq_count). Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230605140731.2427629-3-yebin10@huawei.com>
2023-06-05 14:07:31 +00:00
atomic_inc(&dquot->dq_count);
spin_unlock(&dq_list_lock);
/*
* Once dqput() wakes us up, we know it's time to free
* the dquot.
* IMPORTANT: we rely on the fact that there is always
* at most one process waiting for dquot to free.
* Otherwise dq_count would be > 1 and we would never
* wake up.
*/
wait_event(dquot_ref_wq,
atomic_read(&dquot->dq_count) == 1);
dqput(dquot);
/* At this moment dquot() need not exist (it could be
* reclaimed by prune_dqcache(). Hence we must
* restart. */
goto restart;
}
/*
* The last user already dropped its reference but dquot didn't
* get fully cleaned up yet. Restart the scan which flushes the
* work cleaning up released dquots.
*/
if (test_bit(DQ_RELEASING_B, &dquot->dq_flags)) {
spin_unlock(&dq_list_lock);
goto restart;
}
/*
* Quota now has no users and it has been written on last
* dqput()
*/
remove_dquot_hash(dquot);
remove_free_dquot(dquot);
remove_inuse(dquot);
do_destroy_dquot(dquot);
}
spin_unlock(&dq_list_lock);
}
/* Call callback for every active dquot on given filesystem */
int dquot_scan_active(struct super_block *sb,
int (*fn)(struct dquot *dquot, unsigned long priv),
unsigned long priv)
{
struct dquot *dquot, *old_dquot = NULL;
int ret = 0;
WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount));
spin_lock(&dq_list_lock);
list_for_each_entry(dquot, &inuse_list, dq_inuse) {
if (!dquot_active(dquot))
continue;
if (dquot->dq_sb != sb)
continue;
/* Now we have active dquot so we can just increase use count */
atomic_inc(&dquot->dq_count);
spin_unlock(&dq_list_lock);
dqput(old_dquot);
old_dquot = dquot;
/*
* ->release_dquot() can be racing with us. Our reference
* protects us from new calls to it so just wait for any
* outstanding call and recheck the DQ_ACTIVE_B after that.
*/
wait_on_dquot(dquot);
if (dquot_active(dquot)) {
ret = fn(dquot, priv);
if (ret < 0)
goto out;
}
spin_lock(&dq_list_lock);
/* We are safe to continue now because our dquot could not
* be moved out of the inuse list while we hold the reference */
}
spin_unlock(&dq_list_lock);
out:
dqput(old_dquot);
return ret;
}
EXPORT_SYMBOL(dquot_scan_active);
static inline int dquot_write_dquot(struct dquot *dquot)
{
int ret = dquot->dq_sb->dq_op->write_dquot(dquot);
if (ret < 0) {
quota_error(dquot->dq_sb, "Can't write quota structure "
"(error %d). Quota may get out of sync!", ret);
/* Clear dirty bit anyway to avoid infinite loop. */
clear_dquot_dirty(dquot);
}
return ret;
}
/* Write all dquot structures to quota files */
int dquot_writeback_dquots(struct super_block *sb, int type)
{
struct list_head dirty;
struct dquot *dquot;
struct quota_info *dqopt = sb_dqopt(sb);
int cnt;
int err, ret = 0;
WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount));
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
if (type != -1 && cnt != type)
continue;
if (!sb_has_quota_active(sb, cnt))
continue;
spin_lock(&dq_list_lock);
/* Move list away to avoid livelock. */
list_replace_init(&dqopt->info[cnt].dqi_dirty_list, &dirty);
while (!list_empty(&dirty)) {
dquot = list_first_entry(&dirty, struct dquot,
dq_dirty);
WARN_ON(!dquot_active(dquot));
/* If the dquot is releasing we should not touch it */
if (test_bit(DQ_RELEASING_B, &dquot->dq_flags)) {
spin_unlock(&dq_list_lock);
flush_delayed_work(&quota_release_work);
spin_lock(&dq_list_lock);
continue;
}
/* Now we have active dquot from which someone is
* holding reference so we can safely just increase
* use count */
dqgrab(dquot);
spin_unlock(&dq_list_lock);
err = dquot_write_dquot(dquot);
if (err && !ret)
ret = err;
dqput(dquot);
spin_lock(&dq_list_lock);
}
spin_unlock(&dq_list_lock);
}
for (cnt = 0; cnt < MAXQUOTAS; cnt++)
if ((cnt == type || type == -1) && sb_has_quota_active(sb, cnt)
&& info_dirty(&dqopt->info[cnt]))
sb->dq_op->write_info(sb, cnt);
dqstats_inc(DQST_SYNCS);
return ret;
}
EXPORT_SYMBOL(dquot_writeback_dquots);
/* Write all dquot structures to disk and make them visible from userspace */
int dquot_quota_sync(struct super_block *sb, int type)
{
struct quota_info *dqopt = sb_dqopt(sb);
int cnt;
int ret;
ret = dquot_writeback_dquots(sb, type);
if (ret)
return ret;
if (dqopt->flags & DQUOT_QUOTA_SYS_FILE)
return 0;
/* This is not very clever (and fast) but currently I don't know about
* any other simple way of getting quota data to disk and we must get
* them there for userspace to be visible... */
if (sb->s_op->sync_fs) {
ret = sb->s_op->sync_fs(sb, 1);
if (ret)
return ret;
}
ret = sync_blockdev(sb->s_bdev);
if (ret)
return ret;
/*
* Now when everything is written we can discard the pagecache so
* that userspace sees the changes.
*/
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
if (type != -1 && cnt != type)
continue;
if (!sb_has_quota_active(sb, cnt))
continue;
inode_lock(dqopt->files[cnt]);
truncate_inode_pages(&dqopt->files[cnt]->i_data, 0);
inode_unlock(dqopt->files[cnt]);
}
return 0;
}
EXPORT_SYMBOL(dquot_quota_sync);
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:09 +00:00
static unsigned long
dqcache_shrink_scan(struct shrinker *shrink, struct shrink_control *sc)
{
struct dquot *dquot;
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:09 +00:00
unsigned long freed = 0;
spin_lock(&dq_list_lock);
while (!list_empty(&free_dquots) && sc->nr_to_scan) {
dquot = list_first_entry(&free_dquots, struct dquot, dq_free);
remove_dquot_hash(dquot);
remove_free_dquot(dquot);
remove_inuse(dquot);
do_destroy_dquot(dquot);
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:09 +00:00
sc->nr_to_scan--;
freed++;
}
spin_unlock(&dq_list_lock);
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:09 +00:00
return freed;
}
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:09 +00:00
static unsigned long
dqcache_shrink_count(struct shrinker *shrink, struct shrink_control *sc)
{
super: fix calculation of shrinkable objects for small numbers The sysctl knob sysctl_vfs_cache_pressure is used to determine which percentage of the shrinkable objects in our cache we should actively try to shrink. It works great in situations in which we have many objects (at least more than 100), because the aproximation errors will be negligible. But if this is not the case, specially when total_objects < 100, we may end up concluding that we have no objects at all (total / 100 = 0, if total < 100). This is certainly not the biggest killer in the world, but may matter in very low kernel memory situations. Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:53 +00:00
return vfs_pressure_ratio(
percpu_counter_read_positive(&dqstats.counter[DQST_FREE_DQUOTS]));
}
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
/*
* Safely release dquot and put reference to dquot.
*/
static void quota_release_workfn(struct work_struct *work)
{
struct dquot *dquot;
struct list_head rls_head;
spin_lock(&dq_list_lock);
/* Exchange the list head to avoid livelock. */
list_replace_init(&releasing_dquots, &rls_head);
spin_unlock(&dq_list_lock);
synchronize_srcu(&dquot_srcu);
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
restart:
spin_lock(&dq_list_lock);
while (!list_empty(&rls_head)) {
dquot = list_first_entry(&rls_head, struct dquot, dq_free);
WARN_ON_ONCE(atomic_read(&dquot->dq_count));
/*
* Note that DQ_RELEASING_B protects us from racing with
* invalidate_dquots() calls so we are safe to work with the
* dquot even after we drop dq_list_lock.
*/
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
if (dquot_dirty(dquot)) {
spin_unlock(&dq_list_lock);
/* Commit dquot before releasing */
dquot_write_dquot(dquot);
goto restart;
}
if (dquot_active(dquot)) {
spin_unlock(&dq_list_lock);
dquot->dq_sb->dq_op->release_dquot(dquot);
goto restart;
}
/* Dquot is inactive and clean, now move it to free list */
remove_free_dquot(dquot);
put_dquot_last(dquot);
}
spin_unlock(&dq_list_lock);
}
/*
* Put reference to dquot
*/
void dqput(struct dquot *dquot)
{
if (!dquot)
return;
#ifdef CONFIG_QUOTA_DEBUG
if (!atomic_read(&dquot->dq_count)) {
quota_error(dquot->dq_sb, "trying to free free dquot of %s %d",
quotatypes[dquot->dq_id.type],
from_kqid(&init_user_ns, dquot->dq_id));
BUG();
}
#endif
dqstats_inc(DQST_DROPS);
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
spin_lock(&dq_list_lock);
if (atomic_read(&dquot->dq_count) > 1) {
/* We have more than one user... nothing to do */
atomic_dec(&dquot->dq_count);
/* Releasing dquot during quotaoff phase? */
if (!sb_has_quota_active(dquot->dq_sb, dquot->dq_id.type) &&
atomic_read(&dquot->dq_count) == 1)
wake_up(&dquot_ref_wq);
spin_unlock(&dq_list_lock);
return;
}
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
/* Need to release dquot? */
WARN_ON_ONCE(!list_empty(&dquot->dq_free));
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
put_releasing_dquots(dquot);
atomic_dec(&dquot->dq_count);
spin_unlock(&dq_list_lock);
quota: fix dqput() to follow the guarantees dquot_srcu should provide The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
2023-06-30 11:08:21 +00:00
queue_delayed_work(system_unbound_wq, &quota_release_work, 1);
}
EXPORT_SYMBOL(dqput);
struct dquot *dquot_alloc(struct super_block *sb, int type)
{
return kmem_cache_zalloc(dquot_cachep, GFP_NOFS);
}
EXPORT_SYMBOL(dquot_alloc);
static struct dquot *get_empty_dquot(struct super_block *sb, int type)
{
struct dquot *dquot;
dquot = sb->dq_op->alloc_dquot(sb, type);
if(!dquot)
return NULL;
mutex_init(&dquot->dq_lock);
INIT_LIST_HEAD(&dquot->dq_free);
INIT_LIST_HEAD(&dquot->dq_inuse);
INIT_HLIST_NODE(&dquot->dq_hash);
INIT_LIST_HEAD(&dquot->dq_dirty);
dquot->dq_sb = sb;
dquot->dq_id = make_kqid_invalid(type);
atomic_set(&dquot->dq_count, 1);
spin_lock_init(&dquot->dq_dqb_lock);
return dquot;
}
/*
* Get reference to dquot
*
* Locking is slightly tricky here. We are guarded from parallel quotaoff()
* destroying our dquot by:
* a) checking for quota flags under dq_list_lock and
* b) getting a reference to dquot before we release dq_list_lock
*/
struct dquot *dqget(struct super_block *sb, struct kqid qid)
{
unsigned int hashent = hashfn(sb, qid);
struct dquot *dquot, *empty = NULL;
if (!qid_has_mapping(sb->s_user_ns, qid))
return ERR_PTR(-EINVAL);
if (!sb_has_quota_active(sb, qid.type))
return ERR_PTR(-ESRCH);
we_slept:
spin_lock(&dq_list_lock);
spin_lock(&dq_state_lock);
if (!sb_has_quota_active(sb, qid.type)) {
spin_unlock(&dq_state_lock);
spin_unlock(&dq_list_lock);
dquot = ERR_PTR(-ESRCH);
goto out;
}
spin_unlock(&dq_state_lock);
dquot = find_dquot(hashent, sb, qid);
if (!dquot) {
if (!empty) {
spin_unlock(&dq_list_lock);
empty = get_empty_dquot(sb, qid.type);
if (!empty)
schedule(); /* Try to wait for a moment... */
goto we_slept;
}
dquot = empty;
empty = NULL;
dquot->dq_id = qid;
/* all dquots go on the inuse_list */
put_inuse(dquot);
/* hash it first so it can be found */
insert_dquot_hash(dquot);
spin_unlock(&dq_list_lock);
dqstats_inc(DQST_LOOKUPS);
} else {
if (!atomic_read(&dquot->dq_count))
remove_free_dquot(dquot);
atomic_inc(&dquot->dq_count);
spin_unlock(&dq_list_lock);
dqstats_inc(DQST_CACHE_HITS);
dqstats_inc(DQST_LOOKUPS);
}
/* Wait for dq_lock - after this we know that either dquot_release() is
* already finished or it will be canceled due to dq_count > 0 test */
wait_on_dquot(dquot);
/* Read the dquot / allocate space in quota file */
if (!dquot_active(dquot)) {
int err;
err = sb->dq_op->acquire_dquot(dquot);
if (err < 0) {
dqput(dquot);
dquot = ERR_PTR(err);
goto out;
}
}
/*
* Make sure following reads see filled structure - paired with
* smp_mb__before_atomic() in dquot_acquire().
*/
smp_rmb();
/* Has somebody invalidated entry under us? */
WARN_ON_ONCE(hlist_unhashed(&dquot->dq_hash));
out:
if (empty)
do_destroy_dquot(empty);
return dquot;
}
EXPORT_SYMBOL(dqget);
static inline struct dquot __rcu **i_dquot(struct inode *inode)
{
return inode->i_sb->s_op->get_dquots(inode);
}
static int dqinit_needed(struct inode *inode, int type)
{
struct dquot __rcu * const *dquots;
int cnt;
if (IS_NOQUOTA(inode))
return 0;
dquots = i_dquot(inode);
if (type != -1)
return !dquots[type];
for (cnt = 0; cnt < MAXQUOTAS; cnt++)
if (!dquots[cnt])
return 1;
return 0;
}
/* This routine is guarded by s_umount semaphore */
static int add_dquot_ref(struct super_block *sb, int type)
{
struct inode *inode, *old_inode = NULL;
#ifdef CONFIG_QUOTA_DEBUG
int reserved = 0;
#endif
int err = 0;
spin_lock(&sb->s_inode_list_lock);
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
spin_lock(&inode->i_lock);
if ((inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) ||
!atomic_read(&inode->i_writecount) ||
!dqinit_needed(inode, type)) {
spin_unlock(&inode->i_lock);
continue;
}
__iget(inode);
spin_unlock(&inode->i_lock);
spin_unlock(&sb->s_inode_list_lock);
#ifdef CONFIG_QUOTA_DEBUG
if (unlikely(inode_get_rsv_space(inode) > 0))
reserved = 1;
#endif
iput(old_inode);
err = __dquot_initialize(inode, type);
if (err) {
iput(inode);
goto out;
}
/*
* We hold a reference to 'inode' so it couldn't have been
* removed from s_inodes list while we dropped the
* s_inode_list_lock. We cannot iput the inode now as we can be
* holding the last reference and we cannot iput it under
* s_inode_list_lock. So we keep the reference and iput it
* later.
*/
old_inode = inode;
cond_resched();
spin_lock(&sb->s_inode_list_lock);
}
spin_unlock(&sb->s_inode_list_lock);
iput(old_inode);
out:
#ifdef CONFIG_QUOTA_DEBUG
if (reserved) {
quota_error(sb, "Writes happened before quota was turned on "
"thus quota information is probably inconsistent. "
"Please run quotacheck(8)");
}
#endif
return err;
}
static void remove_dquot_ref(struct super_block *sb, int type)
{
struct inode *inode;
#ifdef CONFIG_QUOTA_DEBUG
int reserved = 0;
#endif
spin_lock(&sb->s_inode_list_lock);
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
/*
* We have to scan also I_NEW inodes because they can already
* have quota pointer initialized. Luckily, we need to touch
* only quota pointers and these have separate locking
* (dq_data_lock).
*/
spin_lock(&dq_data_lock);
if (!IS_NOQUOTA(inode)) {
struct dquot __rcu **dquots = i_dquot(inode);
struct dquot *dquot = srcu_dereference_check(
dquots[type], &dquot_srcu,
lockdep_is_held(&dq_data_lock));
#ifdef CONFIG_QUOTA_DEBUG
if (unlikely(inode_get_rsv_space(inode) > 0))
reserved = 1;
#endif
rcu_assign_pointer(dquots[type], NULL);
if (dquot)
dqput(dquot);
}
spin_unlock(&dq_data_lock);
}
spin_unlock(&sb->s_inode_list_lock);
#ifdef CONFIG_QUOTA_DEBUG
if (reserved) {
printk(KERN_WARNING "VFS (%s): Writes happened after quota"
" was disabled thus quota information is probably "
"inconsistent. Please run quotacheck(8).\n", sb->s_id);
}
#endif
}
/* Gather all references from inodes and drop them */
static void drop_dquot_ref(struct super_block *sb, int type)
{
if (sb->dq_op)
remove_dquot_ref(sb, type);
}
static inline
void dquot_free_reserved_space(struct dquot *dquot, qsize_t number)
{
if (dquot->dq_dqb.dqb_rsvspace >= number)
dquot->dq_dqb.dqb_rsvspace -= number;
else {
WARN_ON_ONCE(1);
dquot->dq_dqb.dqb_rsvspace = 0;
}
if (dquot->dq_dqb.dqb_curspace + dquot->dq_dqb.dqb_rsvspace <=
dquot->dq_dqb.dqb_bsoftlimit)
dquot->dq_dqb.dqb_btime = (time64_t) 0;
clear_bit(DQ_BLKS_B, &dquot->dq_flags);
}
static void dquot_decr_inodes(struct dquot *dquot, qsize_t number)
{
if (sb_dqopt(dquot->dq_sb)->flags & DQUOT_NEGATIVE_USAGE ||
dquot->dq_dqb.dqb_curinodes >= number)
dquot->dq_dqb.dqb_curinodes -= number;
else
dquot->dq_dqb.dqb_curinodes = 0;
if (dquot->dq_dqb.dqb_curinodes <= dquot->dq_dqb.dqb_isoftlimit)
dquot->dq_dqb.dqb_itime = (time64_t) 0;
clear_bit(DQ_INODES_B, &dquot->dq_flags);
}
static void dquot_decr_space(struct dquot *dquot, qsize_t number)
{
if (sb_dqopt(dquot->dq_sb)->flags & DQUOT_NEGATIVE_USAGE ||
dquot->dq_dqb.dqb_curspace >= number)
dquot->dq_dqb.dqb_curspace -= number;
else
dquot->dq_dqb.dqb_curspace = 0;
if (dquot->dq_dqb.dqb_curspace + dquot->dq_dqb.dqb_rsvspace <=
dquot->dq_dqb.dqb_bsoftlimit)
dquot->dq_dqb.dqb_btime = (time64_t) 0;
clear_bit(DQ_BLKS_B, &dquot->dq_flags);
}
struct dquot_warn {
struct super_block *w_sb;
struct kqid w_dq_id;
short w_type;
};
static int warning_issued(struct dquot *dquot, const int warntype)
{
int flag = (warntype == QUOTA_NL_BHARDWARN ||
warntype == QUOTA_NL_BSOFTLONGWARN) ? DQ_BLKS_B :
((warntype == QUOTA_NL_IHARDWARN ||
warntype == QUOTA_NL_ISOFTLONGWARN) ? DQ_INODES_B : 0);
if (!flag)
return 0;
return test_and_set_bit(flag, &dquot->dq_flags);
}
#ifdef CONFIG_PRINT_QUOTA_WARNING
static int flag_print_warnings = 1;
static int need_print_warning(struct dquot_warn *warn)
{
if (!flag_print_warnings)
return 0;
switch (warn->w_dq_id.type) {
case USRQUOTA:
return uid_eq(current_fsuid(), warn->w_dq_id.uid);
case GRPQUOTA:
return in_group_p(warn->w_dq_id.gid);
case PRJQUOTA:
return 1;
}
return 0;
}
/* Print warning to user which exceeded quota */
static void print_warning(struct dquot_warn *warn)
{
char *msg = NULL;
[PATCH] tty: ->signal->tty locking Fix the locking of signal->tty. Use ->sighand->siglock to protect ->signal->tty; this lock is already used by most other members of ->signal/->sighand. And unless we are 'current' or the tasklist_lock is held we need ->siglock to access ->signal anyway. (NOTE: sys_unshare() is broken wrt ->sighand locking rules) Note that tty_mutex is held over tty destruction, so while holding tty_mutex any tty pointer remains valid. Otherwise the lifetime of ttys are governed by their open file handles. This leaves some holes for tty access from signal->tty (or any other non file related tty access). It solves the tty SLAB scribbles we were seeing. (NOTE: the change from group_send_sig_info to __group_send_sig_info needs to be examined by someone familiar with the security framework, I think it is safe given the SEND_SIG_PRIV from other __group_send_sig_info invocations) [schwidefsky@de.ibm.com: 3270 fix] [akpm@osdl.org: various post-viro fixes] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Alan Cox <alan@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Roland McGrath <roland@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:36:04 +00:00
struct tty_struct *tty;
int warntype = warn->w_type;
if (warntype == QUOTA_NL_IHARDBELOW ||
warntype == QUOTA_NL_ISOFTBELOW ||
warntype == QUOTA_NL_BHARDBELOW ||
warntype == QUOTA_NL_BSOFTBELOW || !need_print_warning(warn))
return;
[PATCH] tty: ->signal->tty locking Fix the locking of signal->tty. Use ->sighand->siglock to protect ->signal->tty; this lock is already used by most other members of ->signal/->sighand. And unless we are 'current' or the tasklist_lock is held we need ->siglock to access ->signal anyway. (NOTE: sys_unshare() is broken wrt ->sighand locking rules) Note that tty_mutex is held over tty destruction, so while holding tty_mutex any tty pointer remains valid. Otherwise the lifetime of ttys are governed by their open file handles. This leaves some holes for tty access from signal->tty (or any other non file related tty access). It solves the tty SLAB scribbles we were seeing. (NOTE: the change from group_send_sig_info to __group_send_sig_info needs to be examined by someone familiar with the security framework, I think it is safe given the SEND_SIG_PRIV from other __group_send_sig_info invocations) [schwidefsky@de.ibm.com: 3270 fix] [akpm@osdl.org: various post-viro fixes] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Alan Cox <alan@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Roland McGrath <roland@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:36:04 +00:00
tty = get_current_tty();
if (!tty)
return;
tty_write_message(tty, warn->w_sb->s_id);
if (warntype == QUOTA_NL_ISOFTWARN || warntype == QUOTA_NL_BSOFTWARN)
[PATCH] tty: ->signal->tty locking Fix the locking of signal->tty. Use ->sighand->siglock to protect ->signal->tty; this lock is already used by most other members of ->signal/->sighand. And unless we are 'current' or the tasklist_lock is held we need ->siglock to access ->signal anyway. (NOTE: sys_unshare() is broken wrt ->sighand locking rules) Note that tty_mutex is held over tty destruction, so while holding tty_mutex any tty pointer remains valid. Otherwise the lifetime of ttys are governed by their open file handles. This leaves some holes for tty access from signal->tty (or any other non file related tty access). It solves the tty SLAB scribbles we were seeing. (NOTE: the change from group_send_sig_info to __group_send_sig_info needs to be examined by someone familiar with the security framework, I think it is safe given the SEND_SIG_PRIV from other __group_send_sig_info invocations) [schwidefsky@de.ibm.com: 3270 fix] [akpm@osdl.org: various post-viro fixes] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Alan Cox <alan@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Roland McGrath <roland@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:36:04 +00:00
tty_write_message(tty, ": warning, ");
else
[PATCH] tty: ->signal->tty locking Fix the locking of signal->tty. Use ->sighand->siglock to protect ->signal->tty; this lock is already used by most other members of ->signal/->sighand. And unless we are 'current' or the tasklist_lock is held we need ->siglock to access ->signal anyway. (NOTE: sys_unshare() is broken wrt ->sighand locking rules) Note that tty_mutex is held over tty destruction, so while holding tty_mutex any tty pointer remains valid. Otherwise the lifetime of ttys are governed by their open file handles. This leaves some holes for tty access from signal->tty (or any other non file related tty access). It solves the tty SLAB scribbles we were seeing. (NOTE: the change from group_send_sig_info to __group_send_sig_info needs to be examined by someone familiar with the security framework, I think it is safe given the SEND_SIG_PRIV from other __group_send_sig_info invocations) [schwidefsky@de.ibm.com: 3270 fix] [akpm@osdl.org: various post-viro fixes] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Alan Cox <alan@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Roland McGrath <roland@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:36:04 +00:00
tty_write_message(tty, ": write failed, ");
tty_write_message(tty, quotatypes[warn->w_dq_id.type]);
switch (warntype) {
case QUOTA_NL_IHARDWARN:
msg = " file limit reached.\r\n";
break;
case QUOTA_NL_ISOFTLONGWARN:
msg = " file quota exceeded too long.\r\n";
break;
case QUOTA_NL_ISOFTWARN:
msg = " file quota exceeded.\r\n";
break;
case QUOTA_NL_BHARDWARN:
msg = " block limit reached.\r\n";
break;
case QUOTA_NL_BSOFTLONGWARN:
msg = " block quota exceeded too long.\r\n";
break;
case QUOTA_NL_BSOFTWARN:
msg = " block quota exceeded.\r\n";
break;
}
[PATCH] tty: ->signal->tty locking Fix the locking of signal->tty. Use ->sighand->siglock to protect ->signal->tty; this lock is already used by most other members of ->signal/->sighand. And unless we are 'current' or the tasklist_lock is held we need ->siglock to access ->signal anyway. (NOTE: sys_unshare() is broken wrt ->sighand locking rules) Note that tty_mutex is held over tty destruction, so while holding tty_mutex any tty pointer remains valid. Otherwise the lifetime of ttys are governed by their open file handles. This leaves some holes for tty access from signal->tty (or any other non file related tty access). It solves the tty SLAB scribbles we were seeing. (NOTE: the change from group_send_sig_info to __group_send_sig_info needs to be examined by someone familiar with the security framework, I think it is safe given the SEND_SIG_PRIV from other __group_send_sig_info invocations) [schwidefsky@de.ibm.com: 3270 fix] [akpm@osdl.org: various post-viro fixes] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Alan Cox <alan@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Roland McGrath <roland@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:36:04 +00:00
tty_write_message(tty, msg);
tty_kref_put(tty);
}
#endif
static void prepare_warning(struct dquot_warn *warn, struct dquot *dquot,
int warntype)
{
if (warning_issued(dquot, warntype))
return;
warn->w_type = warntype;
warn->w_sb = dquot->dq_sb;
warn->w_dq_id = dquot->dq_id;
}
/*
* Write warnings to the console and send warning messages over netlink.
*
* Note that this function can call into tty and networking code.
*/
static void flush_warnings(struct dquot_warn *warn)
{
int i;
for (i = 0; i < MAXQUOTAS; i++) {
if (warn[i].w_type == QUOTA_NL_NOWARN)
continue;
#ifdef CONFIG_PRINT_QUOTA_WARNING
print_warning(&warn[i]);
#endif
quota_send_warning(warn[i].w_dq_id,
warn[i].w_sb->s_dev, warn[i].w_type);
}
}
static int ignore_hardlimit(struct dquot *dquot)
{
struct mem_dqinfo *info = &sb_dqopt(dquot->dq_sb)->info[dquot->dq_id.type];
return capable(CAP_SYS_RESOURCE) &&
(info->dqi_format->qf_fmt_id != QFMT_VFS_OLD ||
!(info->dqi_flags & DQF_ROOT_SQUASH));
}
static int dquot_add_inodes(struct dquot *dquot, qsize_t inodes,
struct dquot_warn *warn)
{
qsize_t newinodes;
int ret = 0;
spin_lock(&dquot->dq_dqb_lock);
newinodes = dquot->dq_dqb.dqb_curinodes + inodes;
if (!sb_has_quota_limits_enabled(dquot->dq_sb, dquot->dq_id.type) ||
test_bit(DQ_FAKE_B, &dquot->dq_flags))
goto add;
if (dquot->dq_dqb.dqb_ihardlimit &&
newinodes > dquot->dq_dqb.dqb_ihardlimit &&
!ignore_hardlimit(dquot)) {
prepare_warning(warn, dquot, QUOTA_NL_IHARDWARN);
ret = -EDQUOT;
goto out;
}
if (dquot->dq_dqb.dqb_isoftlimit &&
newinodes > dquot->dq_dqb.dqb_isoftlimit &&
dquot->dq_dqb.dqb_itime &&
ktime_get_real_seconds() >= dquot->dq_dqb.dqb_itime &&
!ignore_hardlimit(dquot)) {
prepare_warning(warn, dquot, QUOTA_NL_ISOFTLONGWARN);
ret = -EDQUOT;
goto out;
}
if (dquot->dq_dqb.dqb_isoftlimit &&
newinodes > dquot->dq_dqb.dqb_isoftlimit &&
dquot->dq_dqb.dqb_itime == 0) {
prepare_warning(warn, dquot, QUOTA_NL_ISOFTWARN);
dquot->dq_dqb.dqb_itime = ktime_get_real_seconds() +
sb_dqopt(dquot->dq_sb)->info[dquot->dq_id.type].dqi_igrace;
}
add:
dquot->dq_dqb.dqb_curinodes = newinodes;
out:
spin_unlock(&dquot->dq_dqb_lock);
return ret;
}
static int dquot_add_space(struct dquot *dquot, qsize_t space,
qsize_t rsv_space, unsigned int flags,
struct dquot_warn *warn)
{
qsize_t tspace;
struct super_block *sb = dquot->dq_sb;
int ret = 0;
spin_lock(&dquot->dq_dqb_lock);
if (!sb_has_quota_limits_enabled(sb, dquot->dq_id.type) ||
test_bit(DQ_FAKE_B, &dquot->dq_flags))
goto finish;
tspace = dquot->dq_dqb.dqb_curspace + dquot->dq_dqb.dqb_rsvspace
+ space + rsv_space;
if (dquot->dq_dqb.dqb_bhardlimit &&
tspace > dquot->dq_dqb.dqb_bhardlimit &&
!ignore_hardlimit(dquot)) {
if (flags & DQUOT_SPACE_WARN)
prepare_warning(warn, dquot, QUOTA_NL_BHARDWARN);
ret = -EDQUOT;
goto finish;
}
if (dquot->dq_dqb.dqb_bsoftlimit &&
tspace > dquot->dq_dqb.dqb_bsoftlimit &&
dquot->dq_dqb.dqb_btime &&
ktime_get_real_seconds() >= dquot->dq_dqb.dqb_btime &&
!ignore_hardlimit(dquot)) {
if (flags & DQUOT_SPACE_WARN)
prepare_warning(warn, dquot, QUOTA_NL_BSOFTLONGWARN);
ret = -EDQUOT;
goto finish;
}
if (dquot->dq_dqb.dqb_bsoftlimit &&
tspace > dquot->dq_dqb.dqb_bsoftlimit &&
dquot->dq_dqb.dqb_btime == 0) {
if (flags & DQUOT_SPACE_WARN) {
prepare_warning(warn, dquot, QUOTA_NL_BSOFTWARN);
dquot->dq_dqb.dqb_btime = ktime_get_real_seconds() +
sb_dqopt(sb)->info[dquot->dq_id.type].dqi_bgrace;
} else {
/*
* We don't allow preallocation to exceed softlimit so exceeding will
* be always printed
*/
ret = -EDQUOT;
goto finish;
}
}
finish:
/*
* We have to be careful and go through warning generation & grace time
* setting even if DQUOT_SPACE_NOFAIL is set. That's why we check it
* only here...
*/
if (flags & DQUOT_SPACE_NOFAIL)
ret = 0;
if (!ret) {
dquot->dq_dqb.dqb_rsvspace += rsv_space;
dquot->dq_dqb.dqb_curspace += space;
}
spin_unlock(&dquot->dq_dqb_lock);
return ret;
}
static int info_idq_free(struct dquot *dquot, qsize_t inodes)
{
qsize_t newinodes;
if (test_bit(DQ_FAKE_B, &dquot->dq_flags) ||
dquot->dq_dqb.dqb_curinodes <= dquot->dq_dqb.dqb_isoftlimit ||
!sb_has_quota_limits_enabled(dquot->dq_sb, dquot->dq_id.type))
return QUOTA_NL_NOWARN;
newinodes = dquot->dq_dqb.dqb_curinodes - inodes;
if (newinodes <= dquot->dq_dqb.dqb_isoftlimit)
return QUOTA_NL_ISOFTBELOW;
if (dquot->dq_dqb.dqb_curinodes >= dquot->dq_dqb.dqb_ihardlimit &&
newinodes < dquot->dq_dqb.dqb_ihardlimit)
return QUOTA_NL_IHARDBELOW;
return QUOTA_NL_NOWARN;
}
static int info_bdq_free(struct dquot *dquot, qsize_t space)
{
qsize_t tspace;
tspace = dquot->dq_dqb.dqb_curspace + dquot->dq_dqb.dqb_rsvspace;
if (test_bit(DQ_FAKE_B, &dquot->dq_flags) ||
tspace <= dquot->dq_dqb.dqb_bsoftlimit)
return QUOTA_NL_NOWARN;
if (tspace - space <= dquot->dq_dqb.dqb_bsoftlimit)
return QUOTA_NL_BSOFTBELOW;
if (tspace >= dquot->dq_dqb.dqb_bhardlimit &&
tspace - space < dquot->dq_dqb.dqb_bhardlimit)
return QUOTA_NL_BHARDBELOW;
return QUOTA_NL_NOWARN;
}
static int inode_quota_active(const struct inode *inode)
{
struct super_block *sb = inode->i_sb;
if (IS_NOQUOTA(inode))
return 0;
return sb_any_quota_loaded(sb) & ~sb_any_quota_suspended(sb);
}
/*
* Initialize quota pointers in inode
*
* It is better to call this function outside of any transaction as it
* might need a lot of space in journal for dquot structure allocation.
*/
static int __dquot_initialize(struct inode *inode, int type)
{
int cnt, init_needed = 0;
struct dquot __rcu **dquots;
struct dquot *got[MAXQUOTAS] = {};
struct super_block *sb = inode->i_sb;
qsize_t rsv;
int ret = 0;
if (!inode_quota_active(inode))
return 0;
dquots = i_dquot(inode);
/* First get references to structures we might need. */
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
struct kqid qid;
kprojid_t projid;
int rc;
struct dquot *dquot;
if (type != -1 && cnt != type)
continue;
/*
* The i_dquot should have been initialized in most cases,
* we check it without locking here to avoid unnecessary
* dqget()/dqput() calls.
*/
if (dquots[cnt])
continue;
if (!sb_has_quota_active(sb, cnt))
continue;
init_needed = 1;
switch (cnt) {
case USRQUOTA:
qid = make_kqid_uid(inode->i_uid);
break;
case GRPQUOTA:
qid = make_kqid_gid(inode->i_gid);
break;
case PRJQUOTA:
rc = inode->i_sb->dq_op->get_projid(inode, &projid);
if (rc)
continue;
qid = make_kqid_projid(projid);
break;
}
dquot = dqget(sb, qid);
if (IS_ERR(dquot)) {
/* We raced with somebody turning quotas off... */
if (PTR_ERR(dquot) != -ESRCH) {
ret = PTR_ERR(dquot);
goto out_put;
}
dquot = NULL;
}
got[cnt] = dquot;
}
/* All required i_dquot has been initialized */
if (!init_needed)
return 0;
spin_lock(&dq_data_lock);
if (IS_NOQUOTA(inode))
goto out_lock;
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
if (type != -1 && cnt != type)
continue;
/* Avoid races with quotaoff() */
if (!sb_has_quota_active(sb, cnt))
continue;
/* We could race with quotaon or dqget() could have failed */
if (!got[cnt])
continue;
if (!dquots[cnt]) {
rcu_assign_pointer(dquots[cnt], got[cnt]);
got[cnt] = NULL;
/*
* Make quota reservation system happy if someone
* did a write before quota was turned on
*/
rsv = inode_get_rsv_space(inode);
if (unlikely(rsv)) {
struct dquot *dquot = srcu_dereference_check(
dquots[cnt], &dquot_srcu,
lockdep_is_held(&dq_data_lock));
spin_lock(&inode->i_lock);
/* Get reservation again under proper lock */
rsv = __inode_get_rsv_space(inode);
spin_lock(&dquot->dq_dqb_lock);
dquot->dq_dqb.dqb_rsvspace += rsv;
spin_unlock(&dquot->dq_dqb_lock);
spin_unlock(&inode->i_lock);
}
}
}
out_lock:
spin_unlock(&dq_data_lock);
out_put:
/* Drop unused references */
dqput_all(got);
return ret;
}
int dquot_initialize(struct inode *inode)
{
return __dquot_initialize(inode, -1);
}
EXPORT_SYMBOL(dquot_initialize);
bool dquot_initialize_needed(struct inode *inode)
{
struct dquot __rcu **dquots;
int i;
if (!inode_quota_active(inode))
return false;
dquots = i_dquot(inode);
for (i = 0; i < MAXQUOTAS; i++)
if (!dquots[i] && sb_has_quota_active(inode->i_sb, i))
return true;
return false;
}
EXPORT_SYMBOL(dquot_initialize_needed);
/*
* Release all quotas referenced by inode.
*
* This function only be called on inode free or converting
* a file to quota file, no other users for the i_dquot in
* both cases, so we needn't call synchronize_srcu() after
* clearing i_dquot.
*/
static void __dquot_drop(struct inode *inode)
{
int cnt;
struct dquot __rcu **dquots = i_dquot(inode);
struct dquot *put[MAXQUOTAS];
spin_lock(&dq_data_lock);
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
put[cnt] = srcu_dereference_check(dquots[cnt], &dquot_srcu,
lockdep_is_held(&dq_data_lock));
rcu_assign_pointer(dquots[cnt], NULL);
}
spin_unlock(&dq_data_lock);
dqput_all(put);
}
void dquot_drop(struct inode *inode)
{
struct dquot __rcu * const *dquots;
int cnt;
if (IS_NOQUOTA(inode))
return;
/*
* Test before calling to rule out calls from proc and such
* where we are not allowed to block. Note that this is
* actually reliable test even without the lock - the caller
* must assure that nobody can come after the DQUOT_DROP and
* add quota pointers back anyway.
*/
dquots = i_dquot(inode);
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
if (dquots[cnt])
break;
}
if (cnt < MAXQUOTAS)
__dquot_drop(inode);
}
EXPORT_SYMBOL(dquot_drop);
/*
* inode_reserved_space is managed internally by quota, and protected by
* i_lock similar to i_blocks+i_bytes.
*/
static qsize_t *inode_reserved_space(struct inode * inode)
{
/* Filesystem must explicitly define it's own method in order to use
* quota reservation interface */
BUG_ON(!inode->i_sb->dq_op->get_reserved_space);
return inode->i_sb->dq_op->get_reserved_space(inode);
}
static qsize_t __inode_get_rsv_space(struct inode *inode)
{
if (!inode->i_sb->dq_op->get_reserved_space)
return 0;
return *inode_reserved_space(inode);
}
static qsize_t inode_get_rsv_space(struct inode *inode)
{
qsize_t ret;
if (!inode->i_sb->dq_op->get_reserved_space)
return 0;
spin_lock(&inode->i_lock);
ret = __inode_get_rsv_space(inode);
spin_unlock(&inode->i_lock);
return ret;
}
/*
* This functions updates i_blocks+i_bytes fields and quota information
* (together with appropriate checks).
*
* NOTE: We absolutely rely on the fact that caller dirties the inode
* (usually helpers in quotaops.h care about this) and holds a handle for
* the current transaction so that dquot write and inode write go into the
* same transaction.
*/
/*
* This operation can block, but only after everything is updated
*/
int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
{
int cnt, ret = 0, index;
struct dquot_warn warn[MAXQUOTAS];
int reserve = flags & DQUOT_SPACE_RESERVE;
struct dquot __rcu **dquots;
struct dquot *dquot;
if (!inode_quota_active(inode)) {
if (reserve) {
spin_lock(&inode->i_lock);
*inode_reserved_space(inode) += number;
spin_unlock(&inode->i_lock);
} else {
inode_add_bytes(inode, number);
}
goto out;
}
for (cnt = 0; cnt < MAXQUOTAS; cnt++)
warn[cnt].w_type = QUOTA_NL_NOWARN;
dquots = i_dquot(inode);
index = srcu_read_lock(&dquot_srcu);
spin_lock(&inode->i_lock);
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
if (!dquot)
continue;
if (reserve) {
ret = dquot_add_space(dquot, 0, number, flags, &warn[cnt]);
} else {
ret = dquot_add_space(dquot, number, 0, flags, &warn[cnt]);
}
if (ret) {
/* Back out changes we already did */
for (cnt--; cnt >= 0; cnt--) {
dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
if (!dquot)
continue;
spin_lock(&dquot->dq_dqb_lock);
if (reserve)
dquot_free_reserved_space(dquot, number);
else
dquot_decr_space(dquot, number);
spin_unlock(&dquot->dq_dqb_lock);
}
spin_unlock(&inode->i_lock);
goto out_flush_warn;
}
}
if (reserve)
*inode_reserved_space(inode) += number;
else
__inode_add_bytes(inode, number);
spin_unlock(&inode->i_lock);
if (reserve)
goto out_flush_warn;
ret = mark_all_dquot_dirty(dquots);
out_flush_warn:
srcu_read_unlock(&dquot_srcu, index);
flush_warnings(warn);
out:
return ret;
}
EXPORT_SYMBOL(__dquot_alloc_space);
/*
* This operation can block, but only after everything is updated
*/
int dquot_alloc_inode(struct inode *inode)
{
int cnt, ret = 0, index;
struct dquot_warn warn[MAXQUOTAS];
struct dquot __rcu * const *dquots;
struct dquot *dquot;
if (!inode_quota_active(inode))
return 0;
for (cnt = 0; cnt < MAXQUOTAS; cnt++)
warn[cnt].w_type = QUOTA_NL_NOWARN;
dquots = i_dquot(inode);
index = srcu_read_lock(&dquot_srcu);
spin_lock(&inode->i_lock);
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
if (!dquot)
continue;
ret = dquot_add_inodes(dquot, 1, &warn[cnt]);
if (ret) {
for (cnt--; cnt >= 0; cnt--) {
dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
if (!dquot)
continue;
/* Back out changes we already did */
spin_lock(&dquot->dq_dqb_lock);
dquot_decr_inodes(dquot, 1);
spin_unlock(&dquot->dq_dqb_lock);
}
goto warn_put_all;
}
}
warn_put_all:
spin_unlock(&inode->i_lock);
if (ret == 0)
ret = mark_all_dquot_dirty(dquots);
srcu_read_unlock(&dquot_srcu, index);
flush_warnings(warn);
return ret;
}
EXPORT_SYMBOL(dquot_alloc_inode);
/*
* Convert in-memory reserved quotas to real consumed quotas
*/
void dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
{
struct dquot __rcu **dquots;
struct dquot *dquot;
int cnt, index;
if (!inode_quota_active(inode)) {
spin_lock(&inode->i_lock);
*inode_reserved_space(inode) -= number;
__inode_add_bytes(inode, number);
spin_unlock(&inode->i_lock);
return;
}
dquots = i_dquot(inode);
index = srcu_read_lock(&dquot_srcu);
spin_lock(&inode->i_lock);
/* Claim reserved quotas to allocated quotas */
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
if (dquot) {
spin_lock(&dquot->dq_dqb_lock);
if (WARN_ON_ONCE(dquot->dq_dqb.dqb_rsvspace < number))
number = dquot->dq_dqb.dqb_rsvspace;
dquot->dq_dqb.dqb_curspace += number;
dquot->dq_dqb.dqb_rsvspace -= number;
spin_unlock(&dquot->dq_dqb_lock);
}
}
/* Update inode bytes */
*inode_reserved_space(inode) -= number;
__inode_add_bytes(inode, number);
spin_unlock(&inode->i_lock);
mark_all_dquot_dirty(dquots);
srcu_read_unlock(&dquot_srcu, index);
return;
}
EXPORT_SYMBOL(dquot_claim_space_nodirty);
/*
* Convert allocated space back to in-memory reserved quotas
*/
void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
{
struct dquot __rcu **dquots;
struct dquot *dquot;
int cnt, index;
if (!inode_quota_active(inode)) {
spin_lock(&inode->i_lock);
*inode_reserved_space(inode) += number;
__inode_sub_bytes(inode, number);
spin_unlock(&inode->i_lock);
return;
}
dquots = i_dquot(inode);
index = srcu_read_lock(&dquot_srcu);
spin_lock(&inode->i_lock);
/* Claim reserved quotas to allocated quotas */
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
if (dquot) {
spin_lock(&dquot->dq_dqb_lock);
if (WARN_ON_ONCE(dquot->dq_dqb.dqb_curspace < number))
number = dquot->dq_dqb.dqb_curspace;
dquot->dq_dqb.dqb_rsvspace += number;
dquot->dq_dqb.dqb_curspace -= number;
spin_unlock(&dquot->dq_dqb_lock);
}
}
/* Update inode bytes */
*inode_reserved_space(inode) += number;
__inode_sub_bytes(inode, number);
spin_unlock(&inode->i_lock);
mark_all_dquot_dirty(dquots);
srcu_read_unlock(&dquot_srcu, index);
return;
}
EXPORT_SYMBOL(dquot_reclaim_space_nodirty);
/*
* This operation can block, but only after everything is updated
*/
void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
{
unsigned int cnt;
struct dquot_warn warn[MAXQUOTAS];
struct dquot __rcu **dquots;
struct dquot *dquot;
int reserve = flags & DQUOT_SPACE_RESERVE, index;
if (!inode_quota_active(inode)) {
if (reserve) {
spin_lock(&inode->i_lock);
*inode_reserved_space(inode) -= number;
spin_unlock(&inode->i_lock);
} else {
inode_sub_bytes(inode, number);
}
return;
}
dquots = i_dquot(inode);
index = srcu_read_lock(&dquot_srcu);
spin_lock(&inode->i_lock);
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
int wtype;
warn[cnt].w_type = QUOTA_NL_NOWARN;
dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
if (!dquot)
continue;
spin_lock(&dquot->dq_dqb_lock);
wtype = info_bdq_free(dquot, number);
if (wtype != QUOTA_NL_NOWARN)
prepare_warning(&warn[cnt], dquot, wtype);
if (reserve)
dquot_free_reserved_space(dquot, number);
else
dquot_decr_space(dquot, number);
spin_unlock(&dquot->dq_dqb_lock);
}
if (reserve)
*inode_reserved_space(inode) -= number;
else
__inode_sub_bytes(inode, number);
spin_unlock(&inode->i_lock);
if (reserve)
goto out_unlock;
mark_all_dquot_dirty(dquots);
out_unlock:
srcu_read_unlock(&dquot_srcu, index);
flush_warnings(warn);
}
EXPORT_SYMBOL(__dquot_free_space);
/*
* This operation can block, but only after everything is updated
*/
void dquot_free_inode(struct inode *inode)
{
unsigned int cnt;
struct dquot_warn warn[MAXQUOTAS];
struct dquot __rcu * const *dquots;
struct dquot *dquot;
int index;
if (!inode_quota_active(inode))
return;
dquots = i_dquot(inode);
index = srcu_read_lock(&dquot_srcu);
spin_lock(&inode->i_lock);
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
int wtype;
warn[cnt].w_type = QUOTA_NL_NOWARN;
dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
if (!dquot)
continue;
spin_lock(&dquot->dq_dqb_lock);
wtype = info_idq_free(dquot, 1);
if (wtype != QUOTA_NL_NOWARN)
prepare_warning(&warn[cnt], dquot, wtype);
dquot_decr_inodes(dquot, 1);
spin_unlock(&dquot->dq_dqb_lock);
}
spin_unlock(&inode->i_lock);
mark_all_dquot_dirty(dquots);
srcu_read_unlock(&dquot_srcu, index);
flush_warnings(warn);
}
EXPORT_SYMBOL(dquot_free_inode);
/*
* Transfer the number of inode and blocks from one diskquota to an other.
* On success, dquot references in transfer_to are consumed and references
* to original dquots that need to be released are placed there. On failure,
* references are kept untouched.
*
* This operation can block, but only after everything is updated
* A transaction must be started when entering this function.
*
* We are holding reference on transfer_from & transfer_to, no need to
* protect them by srcu_read_lock().
*/
int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
{
qsize_t cur_space;
qsize_t rsv_space = 0;
qsize_t inode_usage = 1;
struct dquot __rcu **dquots;
struct dquot *transfer_from[MAXQUOTAS] = {};
int cnt, index, ret = 0, err;
char is_valid[MAXQUOTAS] = {};
struct dquot_warn warn_to[MAXQUOTAS];
struct dquot_warn warn_from_inodes[MAXQUOTAS];
struct dquot_warn warn_from_space[MAXQUOTAS];
if (IS_NOQUOTA(inode))
return 0;
if (inode->i_sb->dq_op->get_inode_usage) {
ret = inode->i_sb->dq_op->get_inode_usage(inode, &inode_usage);
if (ret)
return ret;
}
/* Initialize the arrays */
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
warn_to[cnt].w_type = QUOTA_NL_NOWARN;
warn_from_inodes[cnt].w_type = QUOTA_NL_NOWARN;
warn_from_space[cnt].w_type = QUOTA_NL_NOWARN;
}
spin_lock(&dq_data_lock);
spin_lock(&inode->i_lock);
if (IS_NOQUOTA(inode)) { /* File without quota accounting? */
spin_unlock(&inode->i_lock);
spin_unlock(&dq_data_lock);
return 0;
}
cur_space = __inode_get_bytes(inode);
rsv_space = __inode_get_rsv_space(inode);
dquots = i_dquot(inode);
/*
* Build the transfer_from list, check limits, and update usage in
* the target structures.
*/
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
/*
* Skip changes for same uid or gid or for turned off quota-type.
*/
if (!transfer_to[cnt])
continue;
/* Avoid races with quotaoff() */
if (!sb_has_quota_active(inode->i_sb, cnt))
continue;
is_valid[cnt] = 1;
transfer_from[cnt] = srcu_dereference_check(dquots[cnt],
&dquot_srcu, lockdep_is_held(&dq_data_lock));
ret = dquot_add_inodes(transfer_to[cnt], inode_usage,
&warn_to[cnt]);
if (ret)
goto over_quota;
ret = dquot_add_space(transfer_to[cnt], cur_space, rsv_space,
DQUOT_SPACE_WARN, &warn_to[cnt]);
if (ret) {
spin_lock(&transfer_to[cnt]->dq_dqb_lock);
dquot_decr_inodes(transfer_to[cnt], inode_usage);
spin_unlock(&transfer_to[cnt]->dq_dqb_lock);
goto over_quota;
}
}
/* Decrease usage for source structures and update quota pointers */
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
if (!is_valid[cnt])
continue;
/* Due to IO error we might not have transfer_from[] structure */
if (transfer_from[cnt]) {
int wtype;
spin_lock(&transfer_from[cnt]->dq_dqb_lock);
wtype = info_idq_free(transfer_from[cnt], inode_usage);
if (wtype != QUOTA_NL_NOWARN)
prepare_warning(&warn_from_inodes[cnt],
transfer_from[cnt], wtype);
wtype = info_bdq_free(transfer_from[cnt],
cur_space + rsv_space);
if (wtype != QUOTA_NL_NOWARN)
prepare_warning(&warn_from_space[cnt],
transfer_from[cnt], wtype);
dquot_decr_inodes(transfer_from[cnt], inode_usage);
dquot_decr_space(transfer_from[cnt], cur_space);
dquot_free_reserved_space(transfer_from[cnt],
rsv_space);
spin_unlock(&transfer_from[cnt]->dq_dqb_lock);
}
rcu_assign_pointer(dquots[cnt], transfer_to[cnt]);
}
spin_unlock(&inode->i_lock);
spin_unlock(&dq_data_lock);
/*
* These arrays are local and we hold dquot references so we don't need
* the srcu protection but still take dquot_srcu to avoid warning in
* mark_all_dquot_dirty().
*/
index = srcu_read_lock(&dquot_srcu);
err = mark_all_dquot_dirty((struct dquot __rcu **)transfer_from);
if (err < 0)
ret = err;
err = mark_all_dquot_dirty((struct dquot __rcu **)transfer_to);
if (err < 0)
ret = err;
srcu_read_unlock(&dquot_srcu, index);
flush_warnings(warn_to);
flush_warnings(warn_from_inodes);
flush_warnings(warn_from_space);
/* Pass back references to put */
for (cnt = 0; cnt < MAXQUOTAS; cnt++)
if (is_valid[cnt])
transfer_to[cnt] = transfer_from[cnt];
return ret;
over_quota:
/* Back out changes we already did */
for (cnt--; cnt >= 0; cnt--) {
if (!is_valid[cnt])
continue;
spin_lock(&transfer_to[cnt]->dq_dqb_lock);
dquot_decr_inodes(transfer_to[cnt], inode_usage);
dquot_decr_space(transfer_to[cnt], cur_space);
dquot_free_reserved_space(transfer_to[cnt], rsv_space);
spin_unlock(&transfer_to[cnt]->dq_dqb_lock);
}
spin_unlock(&inode->i_lock);
spin_unlock(&dq_data_lock);
flush_warnings(warn_to);
return ret;
}
EXPORT_SYMBOL(__dquot_transfer);
/* Wrapper for transferring ownership of an inode for uid/gid only
* Called from FSXXX_setattr()
*/
int dquot_transfer(struct mnt_idmap *idmap, struct inode *inode,
quota: port quota helpers mount ids Port the is_quota_modification() and dqout_transfer() helper to type safe vfs{g,u}id_t. Since these helpers are only called by a few filesystems don't introduce a new helper but simply extend the existing helpers to pass down the mount's idmapping. Note, that this is a non-functional change, i.e. nothing will have happened here or at the end of this series to how quota are done! This a change necessary because we will at the end of this series make ownership changes easier to reason about by keeping the original value in struct iattr for both non-idmapped and idmapped mounts. For now we always pass the initial idmapping which makes the idmapping functions these helpers call nops. This is done because we currently always pass the actual value to be written to i_{g,u}id via struct iattr. While this allowed us to treat the {g,u}id values in struct iattr as values that can be directly written to inode->i_{g,u}id it also increases the potential for confusion for filesystems. Now that we are have dedicated types to prevent this confusion we will ultimately only map the value from the idmapped mount into a filesystem value that can be written to inode->i_{g,u}id when the filesystem actually updates the inode. So pass down the initial idmapping until we finished that conversion at which point we pass down the mount's idmapping. Since struct iattr uses an anonymous union with overlapping types as supported by the C standard, filesystems that haven't converted to ia_vfs{g,u}id won't see any difference and things will continue to work as before. In other words, no functional changes intended with this change. Link: https://lore.kernel.org/r/20220621141454.2914719-7-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-06-21 14:14:52 +00:00
struct iattr *iattr)
{
struct dquot *transfer_to[MAXQUOTAS] = {};
struct dquot *dquot;
struct super_block *sb = inode->i_sb;
int ret;
if (!inode_quota_active(inode))
return 0;
if (i_uid_needs_update(idmap, iattr, inode)) {
kuid_t kuid = from_vfsuid(idmap, i_user_ns(inode),
attr: port attribute changes to new types Now that we introduced new infrastructure to increase the type safety for filesystems supporting idmapped mounts port the first part of the vfs over to them. This ports the attribute changes codepaths to rely on the new better helpers using a dedicated type. Before this change we used to take a shortcut and place the actual values that would be written to inode->i_{g,u}id into struct iattr. This had the advantage that we moved idmappings mostly out of the picture early on but it made reasoning about changes more difficult than it should be. The filesystem was never explicitly told that it dealt with an idmapped mount. The transition to the value that needed to be stored in inode->i_{g,u}id appeared way too early and increased the probability of bugs in various codepaths. We know place the same value in struct iattr no matter if this is an idmapped mount or not. The vfs will only deal with type safe vfs{g,u}id_t. This makes it massively safer to perform permission checks as the type will tell us what checks we need to perform and what helpers we need to use. Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to inode->i_{g,u}id since they are different types. Instead they need to use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the vfs{g,u}id into the filesystem. The other nice effect is that filesystems like overlayfs don't need to care about idmappings explicitly anymore and can simply set up struct iattr accordingly directly. Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1] Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-06-21 14:14:54 +00:00
iattr->ia_vfsuid);
dquot = dqget(sb, make_kqid_uid(kuid));
if (IS_ERR(dquot)) {
if (PTR_ERR(dquot) != -ESRCH) {
ret = PTR_ERR(dquot);
goto out_put;
}
dquot = NULL;
}
transfer_to[USRQUOTA] = dquot;
}
if (i_gid_needs_update(idmap, iattr, inode)) {
kgid_t kgid = from_vfsgid(idmap, i_user_ns(inode),
attr: port attribute changes to new types Now that we introduced new infrastructure to increase the type safety for filesystems supporting idmapped mounts port the first part of the vfs over to them. This ports the attribute changes codepaths to rely on the new better helpers using a dedicated type. Before this change we used to take a shortcut and place the actual values that would be written to inode->i_{g,u}id into struct iattr. This had the advantage that we moved idmappings mostly out of the picture early on but it made reasoning about changes more difficult than it should be. The filesystem was never explicitly told that it dealt with an idmapped mount. The transition to the value that needed to be stored in inode->i_{g,u}id appeared way too early and increased the probability of bugs in various codepaths. We know place the same value in struct iattr no matter if this is an idmapped mount or not. The vfs will only deal with type safe vfs{g,u}id_t. This makes it massively safer to perform permission checks as the type will tell us what checks we need to perform and what helpers we need to use. Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to inode->i_{g,u}id since they are different types. Instead they need to use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the vfs{g,u}id into the filesystem. The other nice effect is that filesystems like overlayfs don't need to care about idmappings explicitly anymore and can simply set up struct iattr accordingly directly. Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1] Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-06-21 14:14:54 +00:00
iattr->ia_vfsgid);
dquot = dqget(sb, make_kqid_gid(kgid));
if (IS_ERR(dquot)) {
if (PTR_ERR(dquot) != -ESRCH) {
ret = PTR_ERR(dquot);
goto out_put;
}
dquot = NULL;
}
transfer_to[GRPQUOTA] = dquot;
}
ret = __dquot_transfer(inode, transfer_to);
out_put:
dqput_all(transfer_to);
return ret;
}
EXPORT_SYMBOL(dquot_transfer);
/*
* Write info of quota file to disk
*/
int dquot_commit_info(struct super_block *sb, int type)
{
struct quota_info *dqopt = sb_dqopt(sb);
return dqopt->ops[type]->write_file_info(sb, type);
}
EXPORT_SYMBOL(dquot_commit_info);
int dquot_get_next_id(struct super_block *sb, struct kqid *qid)
{
struct quota_info *dqopt = sb_dqopt(sb);
if (!sb_has_quota_active(sb, qid->type))
return -ESRCH;
if (!dqopt->ops[qid->type]->get_next_id)
return -ENOSYS;
return dqopt->ops[qid->type]->get_next_id(sb, qid);
}
EXPORT_SYMBOL(dquot_get_next_id);
/*
* Definitions of diskquota operations.
*/
const struct dquot_operations dquot_operations = {
.write_dquot = dquot_commit,
.acquire_dquot = dquot_acquire,
.release_dquot = dquot_release,
.mark_dirty = dquot_mark_dquot_dirty,
.write_info = dquot_commit_info,
.alloc_dquot = dquot_alloc,
.destroy_dquot = dquot_destroy,
.get_next_id = dquot_get_next_id,
};
EXPORT_SYMBOL(dquot_operations);
/*
* Generic helper for ->open on filesystems supporting disk quotas.
*/
int dquot_file_open(struct inode *inode, struct file *file)
{
int error;
error = generic_file_open(inode, file);
if (!error && (file->f_mode & FMODE_WRITE))
error = dquot_initialize(inode);
return error;
}
EXPORT_SYMBOL(dquot_file_open);
static void vfs_cleanup_quota_inode(struct super_block *sb, int type)
{
struct quota_info *dqopt = sb_dqopt(sb);
struct inode *inode = dqopt->files[type];
if (!inode)
return;
if (!(dqopt->flags & DQUOT_QUOTA_SYS_FILE)) {
inode_lock(inode);
inode->i_flags &= ~S_NOQUOTA;
inode_unlock(inode);
}
dqopt->files[type] = NULL;
iput(inode);
}
/*
* Turn quota off on a device. type == -1 ==> quotaoff for all types (umount)
*/
int dquot_disable(struct super_block *sb, int type, unsigned int flags)
{
int cnt;
struct quota_info *dqopt = sb_dqopt(sb);
/* s_umount should be held in exclusive mode */
if (WARN_ON_ONCE(down_read_trylock(&sb->s_umount)))
up_read(&sb->s_umount);
/* Cannot turn off usage accounting without turning off limits, or
* suspend quotas and simultaneously turn quotas off. */
if ((flags & DQUOT_USAGE_ENABLED && !(flags & DQUOT_LIMITS_ENABLED))
|| (flags & DQUOT_SUSPENDED && flags & (DQUOT_LIMITS_ENABLED |
DQUOT_USAGE_ENABLED)))
return -EINVAL;
/*
* Skip everything if there's nothing to do. We have to do this because
* sometimes we are called when fill_super() failed and calling
* sync_fs() in such cases does no good.
*/
if (!sb_any_quota_loaded(sb))
return 0;
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
if (type != -1 && cnt != type)
continue;
if (!sb_has_quota_loaded(sb, cnt))
continue;
if (flags & DQUOT_SUSPENDED) {
spin_lock(&dq_state_lock);
dqopt->flags |=
dquot_state_flag(DQUOT_SUSPENDED, cnt);
spin_unlock(&dq_state_lock);
} else {
spin_lock(&dq_state_lock);
dqopt->flags &= ~dquot_state_flag(flags, cnt);
/* Turning off suspended quotas? */
if (!sb_has_quota_loaded(sb, cnt) &&
sb_has_quota_suspended(sb, cnt)) {
dqopt->flags &= ~dquot_state_flag(
DQUOT_SUSPENDED, cnt);
spin_unlock(&dq_state_lock);
vfs_cleanup_quota_inode(sb, cnt);
continue;
}
spin_unlock(&dq_state_lock);
}
/* We still have to keep quota loaded? */
if (sb_has_quota_loaded(sb, cnt) && !(flags & DQUOT_SUSPENDED))
continue;
/* Note: these are blocking operations */
drop_dquot_ref(sb, cnt);
invalidate_dquots(sb, cnt);
/*
* Now all dquots should be invalidated, all writes done so we
* should be only users of the info. No locks needed.
*/
if (info_dirty(&dqopt->info[cnt]))
sb->dq_op->write_info(sb, cnt);
if (dqopt->ops[cnt]->free_file_info)
dqopt->ops[cnt]->free_file_info(sb, cnt);
put_quota_format(dqopt->info[cnt].dqi_format);
dqopt->info[cnt].dqi_flags = 0;
dqopt->info[cnt].dqi_igrace = 0;
dqopt->info[cnt].dqi_bgrace = 0;
dqopt->ops[cnt] = NULL;
}
/* Skip syncing and setting flags if quota files are hidden */
if (dqopt->flags & DQUOT_QUOTA_SYS_FILE)
goto put_inodes;
/* Sync the superblock so that buffers with quota data are written to
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 22:13:39 +00:00
* disk (and so userspace sees correct data afterwards). */
if (sb->s_op->sync_fs)
sb->s_op->sync_fs(sb, 1);
sync_blockdev(sb->s_bdev);
/* Now the quota files are just ordinary files and we can set the
* inode flags back. Moreover we discard the pagecache so that
* userspace sees the writes we did bypassing the pagecache. We
* must also discard the blockdev buffers so that we see the
* changes done by userspace on the next quotaon() */
for (cnt = 0; cnt < MAXQUOTAS; cnt++)
if (!sb_has_quota_loaded(sb, cnt) && dqopt->files[cnt]) {
inode_lock(dqopt->files[cnt]);
truncate_inode_pages(&dqopt->files[cnt]->i_data, 0);
inode_unlock(dqopt->files[cnt]);
}
if (sb->s_bdev)
invalidate_bdev(sb->s_bdev);
put_inodes:
/* We are done when suspending quotas */
if (flags & DQUOT_SUSPENDED)
return 0;
for (cnt = 0; cnt < MAXQUOTAS; cnt++)
if (!sb_has_quota_loaded(sb, cnt))
vfs_cleanup_quota_inode(sb, cnt);
return 0;
}
EXPORT_SYMBOL(dquot_disable);
int dquot_quota_off(struct super_block *sb, int type)
{
return dquot_disable(sb, type,
DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED);
}
EXPORT_SYMBOL(dquot_quota_off);
/*
* Turn quotas on on a device
*/
static int vfs_setup_quota_inode(struct inode *inode, int type)
{
struct super_block *sb = inode->i_sb;
struct quota_info *dqopt = sb_dqopt(sb);
ext4: fix bug_on in __es_tree_search caused by bad quota inode We got a issue as fllows: ================================================================== kernel BUG at fs/ext4/extents_status.c:202! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 810 Comm: mount Not tainted 6.1.0-rc1-next-g9631525255e3 #352 RIP: 0010:__es_tree_search.isra.0+0xb8/0xe0 RSP: 0018:ffffc90001227900 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000077512a0f RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000002a10 RDI: ffff8881004cd0c8 RBP: ffff888177512ac8 R08: 47ffffffffffffff R09: 0000000000000001 R10: 0000000000000001 R11: 00000000000679af R12: 0000000000002a10 R13: ffff888177512d88 R14: 0000000077512a10 R15: 0000000000000000 FS: 00007f4bd76dbc40(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005653bf993cf8 CR3: 000000017bfdf000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ext4_es_cache_extent+0xe2/0x210 ext4_cache_extents+0xd2/0x110 ext4_find_extent+0x5d5/0x8c0 ext4_ext_map_blocks+0x9c/0x1d30 ext4_map_blocks+0x431/0xa50 ext4_getblk+0x82/0x340 ext4_bread+0x14/0x110 ext4_quota_read+0xf0/0x180 v2_read_header+0x24/0x90 v2_check_quota_file+0x2f/0xa0 dquot_load_quota_sb+0x26c/0x760 dquot_load_quota_inode+0xa5/0x190 ext4_enable_quotas+0x14c/0x300 __ext4_fill_super+0x31cc/0x32c0 ext4_fill_super+0x115/0x2d0 get_tree_bdev+0x1d2/0x360 ext4_get_tree+0x19/0x30 vfs_get_tree+0x26/0xe0 path_mount+0x81d/0xfc0 do_mount+0x8d/0xc0 __x64_sys_mount+0xc0/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> ================================================================== Above issue may happen as follows: ------------------------------------- ext4_fill_super ext4_orphan_cleanup ext4_enable_quotas ext4_quota_enable ext4_iget --> get error inode <5> ext4_ext_check_inode --> Wrong imode makes it escape inspection make_bad_inode(inode) --> EXT4_BOOT_LOADER_INO set imode dquot_load_quota_inode vfs_setup_quota_inode --> check pass dquot_load_quota_sb v2_check_quota_file v2_read_header ext4_quota_read ext4_bread ext4_getblk ext4_map_blocks ext4_ext_map_blocks ext4_find_extent ext4_cache_extents ext4_es_cache_extent __es_tree_search.isra.0 ext4_es_end --> Wrong extents trigger BUG_ON In the above issue, s_usr_quota_inum is set to 5, but inode<5> contains incorrect imode and disordered extents. Because 5 is EXT4_BOOT_LOADER_INO, the ext4_ext_check_inode check in the ext4_iget function can be bypassed, finally, the extents that are not checked trigger the BUG_ON in the __es_tree_search function. To solve this issue, check whether the inode is bad_inode in vfs_setup_quota_inode(). Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221026042310.3839669-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2022-10-26 04:23:07 +00:00
if (is_bad_inode(inode))
return -EUCLEAN;
if (!S_ISREG(inode->i_mode))
return -EACCES;
if (IS_RDONLY(inode))
return -EROFS;
if (sb_has_quota_loaded(sb, type))
return -EBUSY;
/*
* Quota files should never be encrypted. They should be thought of as
* filesystem metadata, not user data. New-style internal quota files
* cannot be encrypted by users anyway, but old-style external quota
* files could potentially be incorrectly created in an encrypted
* directory, hence this explicit check. Some reasons why encrypted
* quota files don't work include: (1) some filesystems that support
* encryption don't handle it in their quota_read and quota_write, and
* (2) cleaning up encrypted quota files at unmount would need special
* consideration, as quota files are cleaned up later than user files.
*/
if (IS_ENCRYPTED(inode))
return -EINVAL;
dqopt->files[type] = igrab(inode);
if (!dqopt->files[type])
return -EIO;
if (!(dqopt->flags & DQUOT_QUOTA_SYS_FILE)) {
/* We don't want quota and atime on quota files (deadlocks
* possible) Also nobody should write to the file - we use
* special IO operations which ignore the immutable bit. */
inode_lock(inode);
inode->i_flags |= S_NOQUOTA;
inode_unlock(inode);
/*
* When S_NOQUOTA is set, remove dquot references as no more
* references can be added
*/
__dquot_drop(inode);
}
return 0;
}
int dquot_load_quota_sb(struct super_block *sb, int type, int format_id,
unsigned int flags)
{
struct quota_format_type *fmt = find_quota_format(format_id);
struct quota_info *dqopt = sb_dqopt(sb);
int error;
lockdep_assert_held_write(&sb->s_umount);
/* Just unsuspend quotas? */
if (WARN_ON_ONCE(flags & DQUOT_SUSPENDED))
return -EINVAL;
if (!fmt)
return -ESRCH;
if (!sb->dq_op || !sb->s_qcop ||
(type == PRJQUOTA && sb->dq_op->get_projid == NULL)) {
error = -EINVAL;
goto out_fmt;
}
/* Filesystems outside of init_user_ns not yet supported */
if (sb->s_user_ns != &init_user_ns) {
error = -EINVAL;
goto out_fmt;
}
/* Usage always has to be set... */
if (!(flags & DQUOT_USAGE_ENABLED)) {
error = -EINVAL;
goto out_fmt;
}
if (sb_has_quota_loaded(sb, type)) {
error = -EBUSY;
goto out_fmt;
}
if (!(dqopt->flags & DQUOT_QUOTA_SYS_FILE)) {
/* As we bypass the pagecache we must now flush all the
* dirty data and invalidate caches so that kernel sees
* changes from userspace. It is not enough to just flush
* the quota file since if blocksize < pagesize, invalidation
* of the cache could fail because of other unrelated dirty
* data */
sync_filesystem(sb);
invalidate_bdev(sb->s_bdev);
}
error = -EINVAL;
if (!fmt->qf_ops->check_quota_file(sb, type))
goto out_fmt;
dqopt->ops[type] = fmt->qf_ops;
dqopt->info[type].dqi_format = fmt;
dqopt->info[type].dqi_fmt_id = format_id;
INIT_LIST_HEAD(&dqopt->info[type].dqi_dirty_list);
error = dqopt->ops[type]->read_file_info(sb, type);
if (error < 0)
goto out_fmt;
if (dqopt->flags & DQUOT_QUOTA_SYS_FILE) {
spin_lock(&dq_data_lock);
dqopt->info[type].dqi_flags |= DQF_SYS_FILE;
spin_unlock(&dq_data_lock);
}
spin_lock(&dq_state_lock);
dqopt->flags |= dquot_state_flag(flags, type);
spin_unlock(&dq_state_lock);
error = add_dquot_ref(sb, type);
if (error)
dquot_disable(sb, type,
DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED);
return error;
out_fmt:
put_quota_format(fmt);
return error;
}
EXPORT_SYMBOL(dquot_load_quota_sb);
/*
* More powerful function for turning on quotas on given quota inode allowing
* setting of individual quota flags
*/
int dquot_load_quota_inode(struct inode *inode, int type, int format_id,
unsigned int flags)
{
int err;
err = vfs_setup_quota_inode(inode, type);
if (err < 0)
return err;
err = dquot_load_quota_sb(inode->i_sb, type, format_id, flags);
if (err < 0)
vfs_cleanup_quota_inode(inode->i_sb, type);
return err;
}
EXPORT_SYMBOL(dquot_load_quota_inode);
/* Reenable quotas on remount RW */
int dquot_resume(struct super_block *sb, int type)
{
struct quota_info *dqopt = sb_dqopt(sb);
int ret = 0, cnt;
unsigned int flags;
/* s_umount should be held in exclusive mode */
if (WARN_ON_ONCE(down_read_trylock(&sb->s_umount)))
up_read(&sb->s_umount);
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
if (type != -1 && cnt != type)
continue;
if (!sb_has_quota_suspended(sb, cnt))
continue;
spin_lock(&dq_state_lock);
flags = dqopt->flags & dquot_state_flag(DQUOT_USAGE_ENABLED |
DQUOT_LIMITS_ENABLED,
cnt);
dqopt->flags &= ~dquot_state_flag(DQUOT_STATE_FLAGS, cnt);
spin_unlock(&dq_state_lock);
flags = dquot_generic_flag(flags, cnt);
ret = dquot_load_quota_sb(sb, cnt, dqopt->info[cnt].dqi_fmt_id,
flags);
if (ret < 0)
vfs_cleanup_quota_inode(sb, cnt);
}
return ret;
}
EXPORT_SYMBOL(dquot_resume);
int dquot_quota_on(struct super_block *sb, int type, int format_id,
const struct path *path)
{
int error = security_quota_on(path->dentry);
if (error)
return error;
/* Quota file not on the same filesystem? */
if (path->dentry->d_sb != sb)
error = -EXDEV;
else
error = dquot_load_quota_inode(d_inode(path->dentry), type,
format_id, DQUOT_USAGE_ENABLED |
DQUOT_LIMITS_ENABLED);
return error;
}
EXPORT_SYMBOL(dquot_quota_on);
/*
* This function is used when filesystem needs to initialize quotas
* during mount time.
*/
int dquot_quota_on_mount(struct super_block *sb, char *qf_name,
int format_id, int type)
{
struct dentry *dentry;
int error;
dentry = lookup_positive_unlocked(qf_name, sb->s_root, strlen(qf_name));
if (IS_ERR(dentry))
return PTR_ERR(dentry);
error = security_quota_on(dentry);
if (!error)
error = dquot_load_quota_inode(d_inode(dentry), type, format_id,
DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED);
dput(dentry);
return error;
}
EXPORT_SYMBOL(dquot_quota_on_mount);
static int dquot_quota_enable(struct super_block *sb, unsigned int flags)
{
int ret;
int type;
struct quota_info *dqopt = sb_dqopt(sb);
if (!(dqopt->flags & DQUOT_QUOTA_SYS_FILE))
return -ENOSYS;
/* Accounting cannot be turned on while fs is mounted */
flags &= ~(FS_QUOTA_UDQ_ACCT | FS_QUOTA_GDQ_ACCT | FS_QUOTA_PDQ_ACCT);
if (!flags)
return -EINVAL;
for (type = 0; type < MAXQUOTAS; type++) {
if (!(flags & qtype_enforce_flag(type)))
continue;
/* Can't enforce without accounting */
if (!sb_has_quota_usage_enabled(sb, type)) {
ret = -EINVAL;
goto out_err;
}
if (sb_has_quota_limits_enabled(sb, type)) {
ret = -EBUSY;
goto out_err;
}
spin_lock(&dq_state_lock);
dqopt->flags |= dquot_state_flag(DQUOT_LIMITS_ENABLED, type);
spin_unlock(&dq_state_lock);
}
return 0;
out_err:
/* Backout enforcement enablement we already did */
for (type--; type >= 0; type--) {
if (flags & qtype_enforce_flag(type))
dquot_disable(sb, type, DQUOT_LIMITS_ENABLED);
}
/* Error code translation for better compatibility with XFS */
if (ret == -EBUSY)
ret = -EEXIST;
return ret;
}
static int dquot_quota_disable(struct super_block *sb, unsigned int flags)
{
int ret;
int type;
struct quota_info *dqopt = sb_dqopt(sb);
if (!(dqopt->flags & DQUOT_QUOTA_SYS_FILE))
return -ENOSYS;
/*
* We don't support turning off accounting via quotactl. In principle
* quota infrastructure can do this but filesystems don't expect
* userspace to be able to do it.
*/
if (flags &
(FS_QUOTA_UDQ_ACCT | FS_QUOTA_GDQ_ACCT | FS_QUOTA_PDQ_ACCT))
return -EOPNOTSUPP;
/* Filter out limits not enabled */
for (type = 0; type < MAXQUOTAS; type++)
if (!sb_has_quota_limits_enabled(sb, type))
flags &= ~qtype_enforce_flag(type);
/* Nothing left? */
if (!flags)
return -EEXIST;
for (type = 0; type < MAXQUOTAS; type++) {
if (flags & qtype_enforce_flag(type)) {
ret = dquot_disable(sb, type, DQUOT_LIMITS_ENABLED);
if (ret < 0)
goto out_err;
}
}
return 0;
out_err:
/* Backout enforcement disabling we already did */
for (type--; type >= 0; type--) {
if (flags & qtype_enforce_flag(type)) {
spin_lock(&dq_state_lock);
dqopt->flags |=
dquot_state_flag(DQUOT_LIMITS_ENABLED, type);
spin_unlock(&dq_state_lock);
}
}
return ret;
}
/* Generic routine for getting common part of quota structure */
static void do_get_dqblk(struct dquot *dquot, struct qc_dqblk *di)
{
struct mem_dqblk *dm = &dquot->dq_dqb;
memset(di, 0, sizeof(*di));
spin_lock(&dquot->dq_dqb_lock);
di->d_spc_hardlimit = dm->dqb_bhardlimit;
di->d_spc_softlimit = dm->dqb_bsoftlimit;
di->d_ino_hardlimit = dm->dqb_ihardlimit;
di->d_ino_softlimit = dm->dqb_isoftlimit;
di->d_space = dm->dqb_curspace + dm->dqb_rsvspace;
di->d_ino_count = dm->dqb_curinodes;
di->d_spc_timer = dm->dqb_btime;
di->d_ino_timer = dm->dqb_itime;
spin_unlock(&dquot->dq_dqb_lock);
}
int dquot_get_dqblk(struct super_block *sb, struct kqid qid,
struct qc_dqblk *di)
{
struct dquot *dquot;
dquot = dqget(sb, qid);
if (IS_ERR(dquot))
return PTR_ERR(dquot);
do_get_dqblk(dquot, di);
dqput(dquot);
return 0;
}
EXPORT_SYMBOL(dquot_get_dqblk);
int dquot_get_next_dqblk(struct super_block *sb, struct kqid *qid,
struct qc_dqblk *di)
{
struct dquot *dquot;
int err;
if (!sb->dq_op->get_next_id)
return -ENOSYS;
err = sb->dq_op->get_next_id(sb, qid);
if (err < 0)
return err;
dquot = dqget(sb, *qid);
if (IS_ERR(dquot))
return PTR_ERR(dquot);
do_get_dqblk(dquot, di);
dqput(dquot);
return 0;
}
EXPORT_SYMBOL(dquot_get_next_dqblk);
#define VFS_QC_MASK \
(QC_SPACE | QC_SPC_SOFT | QC_SPC_HARD | \
QC_INO_COUNT | QC_INO_SOFT | QC_INO_HARD | \
QC_SPC_TIMER | QC_INO_TIMER)
/* Generic routine for setting common part of quota structure */
static int do_set_dqblk(struct dquot *dquot, struct qc_dqblk *di)
{
struct mem_dqblk *dm = &dquot->dq_dqb;
int check_blim = 0, check_ilim = 0;
struct mem_dqinfo *dqi = &sb_dqopt(dquot->dq_sb)->info[dquot->dq_id.type];
int ret;
if (di->d_fieldmask & ~VFS_QC_MASK)
return -EINVAL;
if (((di->d_fieldmask & QC_SPC_SOFT) &&
di->d_spc_softlimit > dqi->dqi_max_spc_limit) ||
((di->d_fieldmask & QC_SPC_HARD) &&
di->d_spc_hardlimit > dqi->dqi_max_spc_limit) ||
((di->d_fieldmask & QC_INO_SOFT) &&
(di->d_ino_softlimit > dqi->dqi_max_ino_limit)) ||
((di->d_fieldmask & QC_INO_HARD) &&
(di->d_ino_hardlimit > dqi->dqi_max_ino_limit)))
return -ERANGE;
spin_lock(&dquot->dq_dqb_lock);
if (di->d_fieldmask & QC_SPACE) {
dm->dqb_curspace = di->d_space - dm->dqb_rsvspace;
check_blim = 1;
set_bit(DQ_LASTSET_B + QIF_SPACE_B, &dquot->dq_flags);
}
if (di->d_fieldmask & QC_SPC_SOFT)
dm->dqb_bsoftlimit = di->d_spc_softlimit;
if (di->d_fieldmask & QC_SPC_HARD)
dm->dqb_bhardlimit = di->d_spc_hardlimit;
if (di->d_fieldmask & (QC_SPC_SOFT | QC_SPC_HARD)) {
check_blim = 1;
set_bit(DQ_LASTSET_B + QIF_BLIMITS_B, &dquot->dq_flags);
}
if (di->d_fieldmask & QC_INO_COUNT) {
dm->dqb_curinodes = di->d_ino_count;
check_ilim = 1;
set_bit(DQ_LASTSET_B + QIF_INODES_B, &dquot->dq_flags);
}
if (di->d_fieldmask & QC_INO_SOFT)
dm->dqb_isoftlimit = di->d_ino_softlimit;
if (di->d_fieldmask & QC_INO_HARD)
dm->dqb_ihardlimit = di->d_ino_hardlimit;
if (di->d_fieldmask & (QC_INO_SOFT | QC_INO_HARD)) {
check_ilim = 1;
set_bit(DQ_LASTSET_B + QIF_ILIMITS_B, &dquot->dq_flags);
}
if (di->d_fieldmask & QC_SPC_TIMER) {
dm->dqb_btime = di->d_spc_timer;
check_blim = 1;
set_bit(DQ_LASTSET_B + QIF_BTIME_B, &dquot->dq_flags);
}
if (di->d_fieldmask & QC_INO_TIMER) {
dm->dqb_itime = di->d_ino_timer;
check_ilim = 1;
set_bit(DQ_LASTSET_B + QIF_ITIME_B, &dquot->dq_flags);
}
if (check_blim) {
if (!dm->dqb_bsoftlimit ||
dm->dqb_curspace + dm->dqb_rsvspace <= dm->dqb_bsoftlimit) {
dm->dqb_btime = 0;
clear_bit(DQ_BLKS_B, &dquot->dq_flags);
} else if (!(di->d_fieldmask & QC_SPC_TIMER))
/* Set grace only if user hasn't provided his own... */
dm->dqb_btime = ktime_get_real_seconds() + dqi->dqi_bgrace;
}
if (check_ilim) {
if (!dm->dqb_isoftlimit ||
dm->dqb_curinodes <= dm->dqb_isoftlimit) {
dm->dqb_itime = 0;
clear_bit(DQ_INODES_B, &dquot->dq_flags);
} else if (!(di->d_fieldmask & QC_INO_TIMER))
/* Set grace only if user hasn't provided his own... */
dm->dqb_itime = ktime_get_real_seconds() + dqi->dqi_igrace;
}
if (dm->dqb_bhardlimit || dm->dqb_bsoftlimit || dm->dqb_ihardlimit ||
dm->dqb_isoftlimit)
clear_bit(DQ_FAKE_B, &dquot->dq_flags);
else
set_bit(DQ_FAKE_B, &dquot->dq_flags);
spin_unlock(&dquot->dq_dqb_lock);
ret = mark_dquot_dirty(dquot);
if (ret < 0)
return ret;
return 0;
}
int dquot_set_dqblk(struct super_block *sb, struct kqid qid,
struct qc_dqblk *di)
{
struct dquot *dquot;
int rc;
dquot = dqget(sb, qid);
if (IS_ERR(dquot)) {
rc = PTR_ERR(dquot);
goto out;
}
rc = do_set_dqblk(dquot, di);
dqput(dquot);
out:
return rc;
}
EXPORT_SYMBOL(dquot_set_dqblk);
/* Generic routine for getting common part of quota file information */
int dquot_get_state(struct super_block *sb, struct qc_state *state)
{
struct mem_dqinfo *mi;
struct qc_type_state *tstate;
struct quota_info *dqopt = sb_dqopt(sb);
int type;
memset(state, 0, sizeof(*state));
for (type = 0; type < MAXQUOTAS; type++) {
if (!sb_has_quota_active(sb, type))
continue;
tstate = state->s_state + type;
mi = sb_dqopt(sb)->info + type;
tstate->flags = QCI_ACCT_ENABLED;
spin_lock(&dq_data_lock);
if (mi->dqi_flags & DQF_SYS_FILE)
tstate->flags |= QCI_SYSFILE;
if (mi->dqi_flags & DQF_ROOT_SQUASH)
tstate->flags |= QCI_ROOT_SQUASH;
if (sb_has_quota_limits_enabled(sb, type))
tstate->flags |= QCI_LIMITS_ENFORCED;
tstate->spc_timelimit = mi->dqi_bgrace;
tstate->ino_timelimit = mi->dqi_igrace;
if (dqopt->files[type]) {
tstate->ino = dqopt->files[type]->i_ino;
tstate->blocks = dqopt->files[type]->i_blocks;
}
tstate->nextents = 1; /* We don't know... */
spin_unlock(&dq_data_lock);
}
return 0;
}
EXPORT_SYMBOL(dquot_get_state);
/* Generic routine for setting common part of quota file information */
int dquot_set_dqinfo(struct super_block *sb, int type, struct qc_info *ii)
{
struct mem_dqinfo *mi;
if ((ii->i_fieldmask & QC_WARNS_MASK) ||
(ii->i_fieldmask & QC_RT_SPC_TIMER))
return -EINVAL;
if (!sb_has_quota_active(sb, type))
return -ESRCH;
mi = sb_dqopt(sb)->info + type;
if (ii->i_fieldmask & QC_FLAGS) {
if ((ii->i_flags & QCI_ROOT_SQUASH &&
mi->dqi_format->qf_fmt_id != QFMT_VFS_OLD))
return -EINVAL;
}
spin_lock(&dq_data_lock);
if (ii->i_fieldmask & QC_SPC_TIMER)
mi->dqi_bgrace = ii->i_spc_timelimit;
if (ii->i_fieldmask & QC_INO_TIMER)
mi->dqi_igrace = ii->i_ino_timelimit;
if (ii->i_fieldmask & QC_FLAGS) {
if (ii->i_flags & QCI_ROOT_SQUASH)
mi->dqi_flags |= DQF_ROOT_SQUASH;
else
mi->dqi_flags &= ~DQF_ROOT_SQUASH;
}
spin_unlock(&dq_data_lock);
mark_info_dirty(sb, type);
/* Force write to disk */
return sb->dq_op->write_info(sb, type);
}
EXPORT_SYMBOL(dquot_set_dqinfo);
const struct quotactl_ops dquot_quotactl_sysfile_ops = {
.quota_enable = dquot_quota_enable,
.quota_disable = dquot_quota_disable,
.quota_sync = dquot_quota_sync,
.get_state = dquot_get_state,
.set_info = dquot_set_dqinfo,
.get_dqblk = dquot_get_dqblk,
.get_nextdqblk = dquot_get_next_dqblk,
.set_dqblk = dquot_set_dqblk
};
EXPORT_SYMBOL(dquot_quotactl_sysfile_ops);
static int do_proc_dqstats(struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
unsigned int type = (unsigned long *)table->data - dqstats.stat;
s64 value = percpu_counter_sum(&dqstats.counter[type]);
/* Filter negative values for non-monotonic counters */
if (value < 0 && (type == DQST_ALLOC_DQUOTS ||
type == DQST_FREE_DQUOTS))
value = 0;
/* Update global table */
dqstats.stat[type] = value;
return proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
}
static struct ctl_table fs_dqstats_table[] = {
{
.procname = "lookups",
.data = &dqstats.stat[DQST_LOOKUPS],
.maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "drops",
.data = &dqstats.stat[DQST_DROPS],
.maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "reads",
.data = &dqstats.stat[DQST_READS],
.maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "writes",
.data = &dqstats.stat[DQST_WRITES],
.maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "cache_hits",
.data = &dqstats.stat[DQST_CACHE_HITS],
.maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "allocated_dquots",
.data = &dqstats.stat[DQST_ALLOC_DQUOTS],
.maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "free_dquots",
.data = &dqstats.stat[DQST_FREE_DQUOTS],
.maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "syncs",
.data = &dqstats.stat[DQST_SYNCS],
.maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
#ifdef CONFIG_PRINT_QUOTA_WARNING
{
.procname = "warnings",
.data = &flag_print_warnings,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
};
static int __init dquot_init(void)
{
int i, ret;
unsigned long nr_hash, order;
quota: dynamically allocate the dquota-cache shrinker Use new APIs to dynamically allocate the dquota-cache shrinker. Link: https://lkml.kernel.org/r/20230911094444.68966-14-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:12 +00:00
struct shrinker *dqcache_shrinker;
printk(KERN_NOTICE "VFS: Disk quotas %s\n", __DQUOT_VERSION__);
register_sysctl_init("fs/quota", fs_dqstats_table);
dquot_cachep = kmem_cache_create("dquot",
sizeof(struct dquot), sizeof(unsigned long) * 4,
(SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT|
SLAB_PANIC),
NULL);
order = 0;
dquot_hash = (struct hlist_head *)__get_free_pages(GFP_KERNEL, order);
if (!dquot_hash)
panic("Cannot create dquot hash table");
ret = percpu_counter_init_many(dqstats.counter, 0, GFP_KERNEL,
_DQST_DQSTAT_LAST);
if (ret)
panic("Cannot create dquot stat counters");
/* Find power-of-two hlist_heads which can fit into allocation */
nr_hash = (1UL << order) * PAGE_SIZE / sizeof(struct hlist_head);
dq_hash_bits = ilog2(nr_hash);
nr_hash = 1UL << dq_hash_bits;
dq_hash_mask = nr_hash - 1;
for (i = 0; i < nr_hash; i++)
INIT_HLIST_HEAD(dquot_hash + i);
pr_info("VFS: Dquot-cache hash table entries: %ld (order %ld,"
" %ld bytes)\n", nr_hash, order, (PAGE_SIZE << order));
quota: dynamically allocate the dquota-cache shrinker Use new APIs to dynamically allocate the dquota-cache shrinker. Link: https://lkml.kernel.org/r/20230911094444.68966-14-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:12 +00:00
dqcache_shrinker = shrinker_alloc(0, "dquota-cache");
if (!dqcache_shrinker)
panic("Cannot allocate dquot shrinker");
dqcache_shrinker->count_objects = dqcache_shrink_count;
dqcache_shrinker->scan_objects = dqcache_shrink_scan;
shrinker_register(dqcache_shrinker);
return 0;
}
fs_initcall(dquot_init);