License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2014-01-14 11:02:40 +00:00
|
|
|
/*
|
|
|
|
* cpuidle-powernv - idle state cpuidle driver.
|
|
|
|
* Adapted from drivers/cpuidle/cpuidle-pseries
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/moduleparam.h>
|
|
|
|
#include <linux/cpuidle.h>
|
|
|
|
#include <linux/cpu.h>
|
|
|
|
#include <linux/notifier.h>
|
2014-02-26 00:09:06 +00:00
|
|
|
#include <linux/clockchips.h>
|
2014-02-26 00:09:20 +00:00
|
|
|
#include <linux/of.h>
|
2015-02-18 05:34:17 +00:00
|
|
|
#include <linux/slab.h>
|
2014-01-14 11:02:40 +00:00
|
|
|
|
|
|
|
#include <asm/machdep.h>
|
|
|
|
#include <asm/firmware.h>
|
2014-12-09 18:56:51 +00:00
|
|
|
#include <asm/opal.h>
|
2014-02-17 15:59:29 +00:00
|
|
|
#include <asm/runlatch.h>
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
#include <asm/cpuidle.h>
|
2014-01-14 11:02:40 +00:00
|
|
|
|
2017-01-25 08:36:27 +00:00
|
|
|
/*
|
|
|
|
* Expose only those Hardware idle states via the cpuidle framework
|
|
|
|
* that have latency value below POWERNV_THRESHOLD_LATENCY_NS.
|
|
|
|
*/
|
2016-07-08 06:20:52 +00:00
|
|
|
#define POWERNV_THRESHOLD_LATENCY_NS 200000
|
|
|
|
|
2016-11-22 05:08:06 +00:00
|
|
|
static struct cpuidle_driver powernv_idle_driver = {
|
2014-01-14 11:02:40 +00:00
|
|
|
.name = "powernv_idle",
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
};
|
|
|
|
|
2017-06-14 13:02:40 +00:00
|
|
|
static int max_idle_state __read_mostly;
|
|
|
|
static struct cpuidle_state *cpuidle_state_table __read_mostly;
|
2016-07-08 06:20:52 +00:00
|
|
|
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
struct stop_psscr_table {
|
|
|
|
u64 val;
|
|
|
|
u64 mask;
|
|
|
|
};
|
|
|
|
|
2017-06-14 13:02:40 +00:00
|
|
|
static struct stop_psscr_table stop_psscr_table[CPUIDLE_STATE_MAX] __read_mostly;
|
2016-07-08 06:20:52 +00:00
|
|
|
|
2017-06-14 13:02:40 +00:00
|
|
|
static u64 snooze_timeout __read_mostly;
|
|
|
|
static bool snooze_timeout_en __read_mostly;
|
2014-01-14 11:02:40 +00:00
|
|
|
|
|
|
|
static int snooze_loop(struct cpuidle_device *dev,
|
|
|
|
struct cpuidle_driver *drv,
|
|
|
|
int index)
|
|
|
|
{
|
2015-06-18 11:23:11 +00:00
|
|
|
u64 snooze_exit_time;
|
|
|
|
|
2014-01-14 11:02:40 +00:00
|
|
|
set_thread_flag(TIF_POLLING_NRFLAG);
|
|
|
|
|
2017-06-14 13:02:39 +00:00
|
|
|
local_irq_enable();
|
|
|
|
|
2015-06-18 11:23:11 +00:00
|
|
|
snooze_exit_time = get_tb() + snooze_timeout;
|
2014-02-17 15:59:29 +00:00
|
|
|
ppc64_runlatch_off();
|
2017-04-03 21:54:13 +00:00
|
|
|
HMT_very_low();
|
2014-01-14 11:02:40 +00:00
|
|
|
while (!need_resched()) {
|
2017-06-14 13:02:41 +00:00
|
|
|
if (likely(snooze_timeout_en) && get_tb() > snooze_exit_time) {
|
|
|
|
/*
|
|
|
|
* Task has not woken up but we are exiting the polling
|
|
|
|
* loop anyway. Require a barrier after polling is
|
|
|
|
* cleared to order subsequent test of need_resched().
|
|
|
|
*/
|
|
|
|
clear_thread_flag(TIF_POLLING_NRFLAG);
|
|
|
|
smp_mb();
|
2015-06-18 11:23:11 +00:00
|
|
|
break;
|
2017-06-14 13:02:41 +00:00
|
|
|
}
|
2014-01-14 11:02:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
HMT_medium();
|
2014-02-17 15:59:29 +00:00
|
|
|
ppc64_runlatch_on();
|
2014-01-14 11:02:40 +00:00
|
|
|
clear_thread_flag(TIF_POLLING_NRFLAG);
|
2017-06-14 13:02:39 +00:00
|
|
|
|
2014-01-14 11:02:40 +00:00
|
|
|
return index;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int nap_loop(struct cpuidle_device *dev,
|
|
|
|
struct cpuidle_driver *drv,
|
|
|
|
int index)
|
|
|
|
{
|
2017-06-13 13:05:45 +00:00
|
|
|
power7_idle_type(PNV_THREAD_NAP);
|
|
|
|
|
2014-01-14 11:02:40 +00:00
|
|
|
return index;
|
|
|
|
}
|
|
|
|
|
2015-06-24 06:48:01 +00:00
|
|
|
/* Register for fastsleep only in oneshot mode of broadcast */
|
|
|
|
#ifdef CONFIG_TICK_ONESHOT
|
2014-02-26 00:09:06 +00:00
|
|
|
static int fastsleep_loop(struct cpuidle_device *dev,
|
|
|
|
struct cpuidle_driver *drv,
|
|
|
|
int index)
|
|
|
|
{
|
|
|
|
unsigned long old_lpcr = mfspr(SPRN_LPCR);
|
|
|
|
unsigned long new_lpcr;
|
|
|
|
|
|
|
|
if (unlikely(system_state < SYSTEM_RUNNING))
|
|
|
|
return index;
|
|
|
|
|
|
|
|
new_lpcr = old_lpcr;
|
2014-06-11 05:59:27 +00:00
|
|
|
/* Do not exit powersave upon decrementer as we've setup the timer
|
|
|
|
* offload.
|
2014-02-26 00:09:06 +00:00
|
|
|
*/
|
2014-06-11 05:59:27 +00:00
|
|
|
new_lpcr &= ~LPCR_PECE1;
|
2014-02-26 00:09:06 +00:00
|
|
|
|
|
|
|
mtspr(SPRN_LPCR, new_lpcr);
|
2017-06-13 13:05:45 +00:00
|
|
|
|
|
|
|
power7_idle_type(PNV_THREAD_SLEEP);
|
2014-02-26 00:09:06 +00:00
|
|
|
|
|
|
|
mtspr(SPRN_LPCR, old_lpcr);
|
|
|
|
|
|
|
|
return index;
|
|
|
|
}
|
2015-06-24 06:48:01 +00:00
|
|
|
#endif
|
2016-07-08 06:20:52 +00:00
|
|
|
|
|
|
|
static int stop_loop(struct cpuidle_device *dev,
|
|
|
|
struct cpuidle_driver *drv,
|
|
|
|
int index)
|
|
|
|
{
|
2017-06-13 13:05:45 +00:00
|
|
|
power9_idle_type(stop_psscr_table[index].val,
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
stop_psscr_table[index].mask);
|
2016-07-08 06:20:52 +00:00
|
|
|
return index;
|
|
|
|
}
|
|
|
|
|
2014-01-14 11:02:40 +00:00
|
|
|
/*
|
|
|
|
* States for dedicated partition case.
|
|
|
|
*/
|
2016-07-08 06:20:50 +00:00
|
|
|
static struct cpuidle_state powernv_states[CPUIDLE_STATE_MAX] = {
|
2014-01-14 11:02:40 +00:00
|
|
|
{ /* Snooze */
|
|
|
|
.name = "snooze",
|
|
|
|
.desc = "snooze",
|
|
|
|
.exit_latency = 0,
|
|
|
|
.target_residency = 0,
|
2016-07-08 06:20:51 +00:00
|
|
|
.enter = snooze_loop },
|
2014-01-14 11:02:40 +00:00
|
|
|
};
|
|
|
|
|
2016-08-24 09:12:59 +00:00
|
|
|
static int powernv_cpuidle_cpu_online(unsigned int cpu)
|
2014-01-14 11:02:40 +00:00
|
|
|
{
|
2016-08-24 09:12:59 +00:00
|
|
|
struct cpuidle_device *dev = per_cpu(cpuidle_devices, cpu);
|
2014-01-14 11:02:40 +00:00
|
|
|
|
|
|
|
if (dev && cpuidle_get_driver()) {
|
2016-08-24 09:12:59 +00:00
|
|
|
cpuidle_pause_and_lock();
|
|
|
|
cpuidle_enable_device(dev);
|
|
|
|
cpuidle_resume_and_unlock();
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
2014-01-14 11:02:40 +00:00
|
|
|
|
2016-08-24 09:12:59 +00:00
|
|
|
static int powernv_cpuidle_cpu_dead(unsigned int cpu)
|
|
|
|
{
|
|
|
|
struct cpuidle_device *dev = per_cpu(cpuidle_devices, cpu);
|
2014-01-14 11:02:40 +00:00
|
|
|
|
2016-08-24 09:12:59 +00:00
|
|
|
if (dev && cpuidle_get_driver()) {
|
|
|
|
cpuidle_pause_and_lock();
|
|
|
|
cpuidle_disable_device(dev);
|
|
|
|
cpuidle_resume_and_unlock();
|
2014-01-14 11:02:40 +00:00
|
|
|
}
|
2016-08-24 09:12:59 +00:00
|
|
|
return 0;
|
2014-01-14 11:02:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* powernv_cpuidle_driver_init()
|
|
|
|
*/
|
|
|
|
static int powernv_cpuidle_driver_init(void)
|
|
|
|
{
|
|
|
|
int idle_state;
|
|
|
|
struct cpuidle_driver *drv = &powernv_idle_driver;
|
|
|
|
|
|
|
|
drv->state_count = 0;
|
|
|
|
|
|
|
|
for (idle_state = 0; idle_state < max_idle_state; ++idle_state) {
|
|
|
|
/* Is the state not enabled? */
|
|
|
|
if (cpuidle_state_table[idle_state].enter == NULL)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
drv->states[drv->state_count] = /* structure copy */
|
|
|
|
cpuidle_state_table[idle_state];
|
|
|
|
|
|
|
|
drv->state_count += 1;
|
|
|
|
}
|
|
|
|
|
2017-03-23 15:22:46 +00:00
|
|
|
/*
|
|
|
|
* On the PowerNV platform cpu_present may be less than cpu_possible in
|
|
|
|
* cases when firmware detects the CPU, but it is not available to the
|
|
|
|
* OS. If CONFIG_HOTPLUG_CPU=n, then such CPUs are not hotplugable at
|
|
|
|
* run time and hence cpu_devices are not created for those CPUs by the
|
|
|
|
* generic topology_init().
|
|
|
|
*
|
|
|
|
* drv->cpumask defaults to cpu_possible_mask in
|
|
|
|
* __cpuidle_driver_init(). This breaks cpuidle on PowerNV where
|
|
|
|
* cpu_devices are not created for CPUs in cpu_possible_mask that
|
|
|
|
* cannot be hot-added later at run time.
|
|
|
|
*
|
|
|
|
* Trying cpuidle_register_device() on a CPU without a cpu_device is
|
|
|
|
* incorrect, so pass a correct CPU mask to the generic cpuidle driver.
|
|
|
|
*/
|
|
|
|
|
|
|
|
drv->cpumask = (struct cpumask *)cpu_present_mask;
|
|
|
|
|
2014-01-14 11:02:40 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-01-25 08:36:27 +00:00
|
|
|
static inline void add_powernv_state(int index, const char *name,
|
|
|
|
unsigned int flags,
|
|
|
|
int (*idle_fn)(struct cpuidle_device *,
|
|
|
|
struct cpuidle_driver *,
|
|
|
|
int),
|
|
|
|
unsigned int target_residency,
|
|
|
|
unsigned int exit_latency,
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
u64 psscr_val, u64 psscr_mask)
|
2017-01-25 08:36:27 +00:00
|
|
|
{
|
|
|
|
strlcpy(powernv_states[index].name, name, CPUIDLE_NAME_LEN);
|
|
|
|
strlcpy(powernv_states[index].desc, name, CPUIDLE_NAME_LEN);
|
|
|
|
powernv_states[index].flags = flags;
|
|
|
|
powernv_states[index].target_residency = target_residency;
|
|
|
|
powernv_states[index].exit_latency = exit_latency;
|
|
|
|
powernv_states[index].enter = idle_fn;
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
stop_psscr_table[index].val = psscr_val;
|
|
|
|
stop_psscr_table[index].mask = psscr_mask;
|
2017-01-25 08:36:27 +00:00
|
|
|
}
|
|
|
|
|
2017-03-15 08:15:53 +00:00
|
|
|
/*
|
|
|
|
* Returns 0 if prop1_len == prop2_len. Else returns -1
|
|
|
|
*/
|
|
|
|
static inline int validate_dt_prop_sizes(const char *prop1, int prop1_len,
|
|
|
|
const char *prop2, int prop2_len)
|
|
|
|
{
|
|
|
|
if (prop1_len == prop2_len)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
pr_warn("cpuidle-powernv: array sizes don't match for %s and %s\n",
|
|
|
|
prop1, prop2);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2017-08-08 08:43:15 +00:00
|
|
|
extern u32 pnv_get_supported_cpuidle_states(void);
|
2014-02-26 00:09:20 +00:00
|
|
|
static int powernv_add_idle_states(void)
|
|
|
|
{
|
|
|
|
struct device_node *power_mgt;
|
|
|
|
int nr_idle_states = 1; /* Snooze */
|
2017-03-15 08:15:53 +00:00
|
|
|
int dt_idle_states, count;
|
2016-07-08 06:20:51 +00:00
|
|
|
u32 latency_ns[CPUIDLE_STATE_MAX];
|
|
|
|
u32 residency_ns[CPUIDLE_STATE_MAX];
|
|
|
|
u32 flags[CPUIDLE_STATE_MAX];
|
2016-07-08 06:20:52 +00:00
|
|
|
u64 psscr_val[CPUIDLE_STATE_MAX];
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
u64 psscr_mask[CPUIDLE_STATE_MAX];
|
2016-07-08 06:20:52 +00:00
|
|
|
const char *names[CPUIDLE_STATE_MAX];
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
u32 has_stop_states = 0;
|
2015-02-18 05:34:17 +00:00
|
|
|
int i, rc;
|
2017-08-08 08:43:15 +00:00
|
|
|
u32 supported_flags = pnv_get_supported_cpuidle_states();
|
|
|
|
|
2014-02-26 00:09:20 +00:00
|
|
|
|
|
|
|
/* Currently we have snooze statically defined */
|
|
|
|
|
|
|
|
power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
|
|
|
|
if (!power_mgt) {
|
|
|
|
pr_warn("opal: PowerMgmt Node not found\n");
|
2015-02-18 05:34:17 +00:00
|
|
|
goto out;
|
2014-02-26 00:09:20 +00:00
|
|
|
}
|
|
|
|
|
2015-02-19 05:24:53 +00:00
|
|
|
/* Read values of any property to determine the num of idle states */
|
|
|
|
dt_idle_states = of_property_count_u32_elems(power_mgt, "ibm,cpu-idle-state-flags");
|
|
|
|
if (dt_idle_states < 0) {
|
|
|
|
pr_warn("cpuidle-powernv: no idle states found in the DT\n");
|
2015-02-18 05:34:17 +00:00
|
|
|
goto out;
|
2014-02-26 00:09:20 +00:00
|
|
|
}
|
|
|
|
|
2017-03-15 08:15:53 +00:00
|
|
|
count = of_property_count_u32_elems(power_mgt,
|
|
|
|
"ibm,cpu-idle-state-latencies-ns");
|
|
|
|
|
|
|
|
if (validate_dt_prop_sizes("ibm,cpu-idle-state-flags", dt_idle_states,
|
|
|
|
"ibm,cpu-idle-state-latencies-ns",
|
|
|
|
count) != 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
count = of_property_count_strings(power_mgt,
|
|
|
|
"ibm,cpu-idle-state-names");
|
|
|
|
if (validate_dt_prop_sizes("ibm,cpu-idle-state-flags", dt_idle_states,
|
|
|
|
"ibm,cpu-idle-state-names",
|
|
|
|
count) != 0)
|
|
|
|
goto out;
|
|
|
|
|
2016-07-08 06:20:51 +00:00
|
|
|
/*
|
|
|
|
* Since snooze is used as first idle state, max idle states allowed is
|
|
|
|
* CPUIDLE_STATE_MAX -1
|
|
|
|
*/
|
|
|
|
if (dt_idle_states > CPUIDLE_STATE_MAX - 1) {
|
|
|
|
pr_warn("cpuidle-powernv: discovered idle states more than allowed");
|
|
|
|
dt_idle_states = CPUIDLE_STATE_MAX - 1;
|
|
|
|
}
|
|
|
|
|
2015-02-19 05:24:53 +00:00
|
|
|
if (of_property_read_u32_array(power_mgt,
|
|
|
|
"ibm,cpu-idle-state-flags", flags, dt_idle_states)) {
|
|
|
|
pr_warn("cpuidle-powernv : missing ibm,cpu-idle-state-flags in DT\n");
|
2016-07-08 06:20:51 +00:00
|
|
|
goto out;
|
2015-02-19 05:24:53 +00:00
|
|
|
}
|
2015-02-18 05:34:17 +00:00
|
|
|
|
2016-07-08 06:20:51 +00:00
|
|
|
if (of_property_read_u32_array(power_mgt,
|
|
|
|
"ibm,cpu-idle-state-latencies-ns", latency_ns,
|
|
|
|
dt_idle_states)) {
|
2015-02-18 05:34:17 +00:00
|
|
|
pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-latencies-ns in DT\n");
|
2016-07-08 06:20:51 +00:00
|
|
|
goto out;
|
2014-10-14 07:53:00 +00:00
|
|
|
}
|
2016-07-08 06:20:52 +00:00
|
|
|
if (of_property_read_string_array(power_mgt,
|
|
|
|
"ibm,cpu-idle-state-names", names, dt_idle_states) < 0) {
|
|
|
|
pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-names in DT\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the idle states use stop instruction, probe for psscr values
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
* and psscr mask which are necessary to specify required stop level.
|
2016-07-08 06:20:52 +00:00
|
|
|
*/
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
has_stop_states = (flags[0] &
|
|
|
|
(OPAL_PM_STOP_INST_FAST | OPAL_PM_STOP_INST_DEEP));
|
|
|
|
if (has_stop_states) {
|
2017-03-15 08:15:53 +00:00
|
|
|
count = of_property_count_u64_elems(power_mgt,
|
|
|
|
"ibm,cpu-idle-state-psscr");
|
|
|
|
if (validate_dt_prop_sizes("ibm,cpu-idle-state-flags",
|
|
|
|
dt_idle_states,
|
|
|
|
"ibm,cpu-idle-state-psscr",
|
|
|
|
count) != 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
count = of_property_count_u64_elems(power_mgt,
|
|
|
|
"ibm,cpu-idle-state-psscr-mask");
|
|
|
|
if (validate_dt_prop_sizes("ibm,cpu-idle-state-flags",
|
|
|
|
dt_idle_states,
|
|
|
|
"ibm,cpu-idle-state-psscr-mask",
|
|
|
|
count) != 0)
|
|
|
|
goto out;
|
|
|
|
|
2016-07-08 06:20:52 +00:00
|
|
|
if (of_property_read_u64_array(power_mgt,
|
|
|
|
"ibm,cpu-idle-state-psscr", psscr_val, dt_idle_states)) {
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-psscr in DT\n");
|
2016-07-08 06:20:52 +00:00
|
|
|
goto out;
|
|
|
|
}
|
2014-10-14 07:53:00 +00:00
|
|
|
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
if (of_property_read_u64_array(power_mgt,
|
|
|
|
"ibm,cpu-idle-state-psscr-mask",
|
|
|
|
psscr_mask, dt_idle_states)) {
|
|
|
|
pr_warn("cpuidle-powernv:Missing ibm,cpu-idle-state-psscr-mask in DT\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-03-15 08:15:53 +00:00
|
|
|
count = of_property_count_u32_elems(power_mgt,
|
|
|
|
"ibm,cpu-idle-state-residency-ns");
|
|
|
|
|
|
|
|
if (count < 0) {
|
|
|
|
rc = count;
|
|
|
|
} else if (validate_dt_prop_sizes("ibm,cpu-idle-state-flags",
|
|
|
|
dt_idle_states,
|
|
|
|
"ibm,cpu-idle-state-residency-ns",
|
|
|
|
count) != 0) {
|
|
|
|
goto out;
|
|
|
|
} else {
|
|
|
|
rc = of_property_read_u32_array(power_mgt,
|
|
|
|
"ibm,cpu-idle-state-residency-ns",
|
|
|
|
residency_ns, dt_idle_states);
|
|
|
|
}
|
2014-02-26 00:09:20 +00:00
|
|
|
|
|
|
|
for (i = 0; i < dt_idle_states; i++) {
|
2017-01-25 08:36:27 +00:00
|
|
|
unsigned int exit_latency, target_residency;
|
2017-05-16 08:49:48 +00:00
|
|
|
bool stops_timebase = false;
|
2017-08-08 08:43:15 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Skip the platform idle state whose flag isn't in
|
|
|
|
* the supported_cpuidle_states flag mask.
|
|
|
|
*/
|
|
|
|
if ((flags[i] & supported_flags) != flags[i])
|
|
|
|
continue;
|
2016-07-08 06:20:52 +00:00
|
|
|
/*
|
|
|
|
* If an idle state has exit latency beyond
|
|
|
|
* POWERNV_THRESHOLD_LATENCY_NS then don't use it
|
|
|
|
* in cpu-idle.
|
|
|
|
*/
|
|
|
|
if (latency_ns[i] > POWERNV_THRESHOLD_LATENCY_NS)
|
|
|
|
continue;
|
2017-01-25 08:36:27 +00:00
|
|
|
/*
|
|
|
|
* Firmware passes residency and latency values in ns.
|
|
|
|
* cpuidle expects it in us.
|
|
|
|
*/
|
2017-08-23 18:58:41 +00:00
|
|
|
exit_latency = DIV_ROUND_UP(latency_ns[i], 1000);
|
2017-01-25 08:36:27 +00:00
|
|
|
if (!rc)
|
2017-08-23 18:58:41 +00:00
|
|
|
target_residency = DIV_ROUND_UP(residency_ns[i], 1000);
|
2017-01-25 08:36:27 +00:00
|
|
|
else
|
|
|
|
target_residency = 0;
|
2014-02-26 00:09:20 +00:00
|
|
|
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
if (has_stop_states) {
|
|
|
|
int err = validate_psscr_val_mask(&psscr_val[i],
|
|
|
|
&psscr_mask[i],
|
|
|
|
flags[i]);
|
|
|
|
if (err) {
|
|
|
|
report_invalid_psscr_val(psscr_val[i], err);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-05-16 08:49:48 +00:00
|
|
|
if (flags[i] & OPAL_PM_TIMEBASE_STOP)
|
|
|
|
stops_timebase = true;
|
|
|
|
|
2015-02-18 05:34:17 +00:00
|
|
|
/*
|
2017-01-25 08:36:27 +00:00
|
|
|
* For nap and fastsleep, use default target_residency
|
|
|
|
* values if f/w does not expose it.
|
2014-10-14 07:53:00 +00:00
|
|
|
*/
|
2015-02-19 05:24:53 +00:00
|
|
|
if (flags[i] & OPAL_PM_NAP_ENABLED) {
|
2017-01-25 08:36:27 +00:00
|
|
|
if (!rc)
|
|
|
|
target_residency = 100;
|
2014-02-26 00:09:20 +00:00
|
|
|
/* Add NAP state */
|
2017-01-25 08:36:27 +00:00
|
|
|
add_powernv_state(nr_idle_states, "Nap",
|
|
|
|
CPUIDLE_FLAG_NONE, nap_loop,
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
target_residency, exit_latency, 0, 0);
|
2017-05-16 08:49:48 +00:00
|
|
|
} else if (has_stop_states && !stops_timebase) {
|
2017-01-25 08:36:27 +00:00
|
|
|
add_powernv_state(nr_idle_states, names[i],
|
|
|
|
CPUIDLE_FLAG_NONE, stop_loop,
|
|
|
|
target_residency, exit_latency,
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
psscr_val[i], psscr_mask[i]);
|
2015-06-24 06:48:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* All cpuidle states with CPUIDLE_FLAG_TIMER_STOP set must come
|
|
|
|
* within this config dependency check.
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_TICK_ONESHOT
|
2017-05-16 08:49:48 +00:00
|
|
|
else if (flags[i] & OPAL_PM_SLEEP_ENABLED ||
|
|
|
|
flags[i] & OPAL_PM_SLEEP_ENABLED_ER1) {
|
2017-01-25 08:36:27 +00:00
|
|
|
if (!rc)
|
|
|
|
target_residency = 300000;
|
2014-02-26 00:09:20 +00:00
|
|
|
/* Add FASTSLEEP state */
|
2017-01-25 08:36:27 +00:00
|
|
|
add_powernv_state(nr_idle_states, "FastSleep",
|
|
|
|
CPUIDLE_FLAG_TIMER_STOP,
|
|
|
|
fastsleep_loop,
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
target_residency, exit_latency, 0, 0);
|
2017-05-16 08:49:48 +00:00
|
|
|
} else if (has_stop_states && stops_timebase) {
|
2017-01-25 08:36:27 +00:00
|
|
|
add_powernv_state(nr_idle_states, names[i],
|
|
|
|
CPUIDLE_FLAG_TIMER_STOP, stop_loop,
|
|
|
|
target_residency, exit_latency,
|
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 08:36:28 +00:00
|
|
|
psscr_val[i], psscr_mask[i]);
|
2014-02-26 00:09:20 +00:00
|
|
|
}
|
2015-06-24 06:48:01 +00:00
|
|
|
#endif
|
2017-05-16 08:49:48 +00:00
|
|
|
else
|
|
|
|
continue;
|
2015-02-18 05:34:17 +00:00
|
|
|
nr_idle_states++;
|
2014-02-26 00:09:20 +00:00
|
|
|
}
|
2015-02-18 05:34:17 +00:00
|
|
|
out:
|
2014-02-26 00:09:20 +00:00
|
|
|
return nr_idle_states;
|
|
|
|
}
|
|
|
|
|
2014-01-14 11:02:40 +00:00
|
|
|
/*
|
|
|
|
* powernv_idle_probe()
|
|
|
|
* Choose state table for shared versus dedicated partition
|
|
|
|
*/
|
|
|
|
static int powernv_idle_probe(void)
|
|
|
|
{
|
|
|
|
if (cpuidle_disable != IDLE_NO_OVERRIDE)
|
|
|
|
return -ENODEV;
|
|
|
|
|
2015-12-09 06:18:20 +00:00
|
|
|
if (firmware_has_feature(FW_FEATURE_OPAL)) {
|
2014-01-14 11:02:40 +00:00
|
|
|
cpuidle_state_table = powernv_states;
|
2014-02-26 00:09:20 +00:00
|
|
|
/* Device tree can indicate more idle states */
|
|
|
|
max_idle_state = powernv_add_idle_states();
|
2015-06-18 11:23:11 +00:00
|
|
|
if (max_idle_state > 1) {
|
|
|
|
snooze_timeout_en = true;
|
|
|
|
snooze_timeout = powernv_states[1].target_residency *
|
|
|
|
tb_ticks_per_usec;
|
|
|
|
}
|
2014-01-14 11:02:40 +00:00
|
|
|
} else
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init powernv_processor_idle_init(void)
|
|
|
|
{
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = powernv_idle_probe();
|
|
|
|
if (retval)
|
|
|
|
return retval;
|
|
|
|
|
|
|
|
powernv_cpuidle_driver_init();
|
|
|
|
retval = cpuidle_register(&powernv_idle_driver, NULL);
|
|
|
|
if (retval) {
|
|
|
|
printk(KERN_DEBUG "Registration of powernv driver failed.\n");
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
2016-08-24 09:12:59 +00:00
|
|
|
retval = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
|
|
|
|
"cpuidle/powernv:online",
|
|
|
|
powernv_cpuidle_cpu_online, NULL);
|
|
|
|
WARN_ON(retval < 0);
|
|
|
|
retval = cpuhp_setup_state_nocalls(CPUHP_CPUIDLE_DEAD,
|
|
|
|
"cpuidle/powernv:dead", NULL,
|
|
|
|
powernv_cpuidle_cpu_dead);
|
|
|
|
WARN_ON(retval < 0);
|
2014-01-14 11:02:40 +00:00
|
|
|
printk(KERN_DEBUG "powernv_idle_driver registered\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
device_initcall(powernv_processor_idle_init);
|