linux-stable/drivers/media/rc/sunxi-cir.c

430 lines
10 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 06:55:06 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Driver for Allwinner sunXi IR controller
*
* Copyright (C) 2014 Alexsey Shestacov <wingrime@linux-sunxi.org>
* Copyright (C) 2014 Alexander Bersenev <bay@hackerdom.ru>
*
* Based on sun5i-ir.c:
* Copyright (C) 2007-2012 Daniel Wang
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
*/
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/reset.h>
#include <media/rc-core.h>
#define SUNXI_IR_DEV "sunxi-ir"
/* Registers */
/* IR Control */
#define SUNXI_IR_CTL_REG 0x00
/* Global Enable */
#define REG_CTL_GEN BIT(0)
/* RX block enable */
#define REG_CTL_RXEN BIT(1)
/* CIR mode */
#define REG_CTL_MD (BIT(4) | BIT(5))
/* Rx Config */
#define SUNXI_IR_RXCTL_REG 0x10
/* Pulse Polarity Invert flag */
#define REG_RXCTL_RPPI BIT(2)
/* Rx Data */
#define SUNXI_IR_RXFIFO_REG 0x20
/* Rx Interrupt Enable */
#define SUNXI_IR_RXINT_REG 0x2C
/* Rx FIFO Overflow Interrupt Enable */
#define REG_RXINT_ROI_EN BIT(0)
/* Rx Packet End Interrupt Enable */
#define REG_RXINT_RPEI_EN BIT(1)
/* Rx FIFO Data Available Interrupt Enable */
#define REG_RXINT_RAI_EN BIT(4)
/* Rx FIFO available byte level */
#define REG_RXINT_RAL(val) ((val) << 8)
/* Rx Interrupt Status */
#define SUNXI_IR_RXSTA_REG 0x30
/* Rx FIFO Overflow */
#define REG_RXSTA_ROI REG_RXINT_ROI_EN
/* Rx Packet End */
#define REG_RXSTA_RPE REG_RXINT_RPEI_EN
/* Rx FIFO Data Available */
#define REG_RXSTA_RA REG_RXINT_RAI_EN
/* RX FIFO Get Available Counter */
#define REG_RXSTA_GET_AC(val) (((val) >> 8) & (ir->fifo_size * 2 - 1))
/* Clear all interrupt status value */
#define REG_RXSTA_CLEARALL 0xff
/* IR Sample Config */
#define SUNXI_IR_CIR_REG 0x34
/* CIR_REG register noise threshold */
#define REG_CIR_NTHR(val) (((val) << 2) & (GENMASK(7, 2)))
/* CIR_REG register idle threshold */
#define REG_CIR_ITHR(val) (((val) << 8) & (GENMASK(15, 8)))
/* Required frequency for IR0 or IR1 clock in CIR mode (default) */
#define SUNXI_IR_BASE_CLK 8000000
/* Noise threshold in samples */
#define SUNXI_IR_RXNOISE 1
/**
* struct sunxi_ir_quirks - Differences between SoC variants.
*
* @has_reset: SoC needs reset deasserted.
* @fifo_size: size of the fifo.
*/
struct sunxi_ir_quirks {
bool has_reset;
int fifo_size;
};
struct sunxi_ir {
struct rc_dev *rc;
void __iomem *base;
int irq;
int fifo_size;
struct clk *clk;
struct clk *apb_clk;
struct reset_control *rst;
const char *map_name;
};
static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
{
unsigned long status;
unsigned char dt;
unsigned int cnt, rc;
struct sunxi_ir *ir = dev_id;
struct ir_raw_event rawir = {};
status = readl(ir->base + SUNXI_IR_RXSTA_REG);
/* clean all pending statuses */
writel(status | REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
if (status & (REG_RXSTA_RA | REG_RXSTA_RPE)) {
/* How many messages in fifo */
rc = REG_RXSTA_GET_AC(status);
/* Sanity check */
rc = rc > ir->fifo_size ? ir->fifo_size : rc;
/* If we have data */
for (cnt = 0; cnt < rc; cnt++) {
/* for each bit in fifo */
dt = readb(ir->base + SUNXI_IR_RXFIFO_REG);
rawir.pulse = (dt & 0x80) != 0;
rawir.duration = ((dt & 0x7f) + 1) *
ir->rc->rx_resolution;
ir_raw_event_store_with_filter(ir->rc, &rawir);
}
}
if (status & REG_RXSTA_ROI) {
ir_raw_event_overflow(ir->rc);
} else if (status & REG_RXSTA_RPE) {
ir_raw_event_set_idle(ir->rc, true);
ir_raw_event_handle(ir->rc);
} else {
ir_raw_event_handle(ir->rc);
}
return IRQ_HANDLED;
}
/* Convert idle threshold to usec */
static unsigned int sunxi_ithr_to_usec(unsigned int base_clk, unsigned int ithr)
{
return DIV_ROUND_CLOSEST(USEC_PER_SEC * (ithr + 1),
base_clk / (128 * 64));
}
/* Convert usec to idle threshold */
static unsigned int sunxi_usec_to_ithr(unsigned int base_clk, unsigned int usec)
{
/* make sure we don't end up with a timeout less than requested */
return DIV_ROUND_UP((base_clk / (128 * 64)) * usec, USEC_PER_SEC) - 1;
}
static int sunxi_ir_set_timeout(struct rc_dev *rc_dev, unsigned int timeout)
{
struct sunxi_ir *ir = rc_dev->priv;
unsigned int base_clk = clk_get_rate(ir->clk);
unsigned int ithr = sunxi_usec_to_ithr(base_clk, timeout);
dev_dbg(rc_dev->dev.parent, "setting idle threshold to %u\n", ithr);
/* Set noise threshold and idle threshold */
writel(REG_CIR_NTHR(SUNXI_IR_RXNOISE) | REG_CIR_ITHR(ithr),
ir->base + SUNXI_IR_CIR_REG);
rc_dev->timeout = sunxi_ithr_to_usec(base_clk, ithr);
return 0;
}
static int sunxi_ir_hw_init(struct device *dev)
{
struct sunxi_ir *ir = dev_get_drvdata(dev);
u32 tmp;
int ret;
ret = reset_control_deassert(ir->rst);
if (ret)
return ret;
ret = clk_prepare_enable(ir->apb_clk);
if (ret) {
dev_err(dev, "failed to enable apb clk\n");
goto exit_assert_reset;
}
ret = clk_prepare_enable(ir->clk);
if (ret) {
dev_err(dev, "failed to enable ir clk\n");
goto exit_disable_apb_clk;
}
/* Enable CIR Mode */
writel(REG_CTL_MD, ir->base + SUNXI_IR_CTL_REG);
/* Set noise threshold and idle threshold */
sunxi_ir_set_timeout(ir->rc, ir->rc->timeout);
/* Invert Input Signal */
writel(REG_RXCTL_RPPI, ir->base + SUNXI_IR_RXCTL_REG);
/* Clear All Rx Interrupt Status */
writel(REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
/*
* Enable IRQ on overflow, packet end, FIFO available with trigger
* level
*/
writel(REG_RXINT_ROI_EN | REG_RXINT_RPEI_EN |
REG_RXINT_RAI_EN | REG_RXINT_RAL(ir->fifo_size / 2 - 1),
ir->base + SUNXI_IR_RXINT_REG);
/* Enable IR Module */
tmp = readl(ir->base + SUNXI_IR_CTL_REG);
writel(tmp | REG_CTL_GEN | REG_CTL_RXEN, ir->base + SUNXI_IR_CTL_REG);
return 0;
exit_disable_apb_clk:
clk_disable_unprepare(ir->apb_clk);
exit_assert_reset:
reset_control_assert(ir->rst);
return ret;
}
static void sunxi_ir_hw_exit(struct device *dev)
{
struct sunxi_ir *ir = dev_get_drvdata(dev);
clk_disable_unprepare(ir->clk);
clk_disable_unprepare(ir->apb_clk);
reset_control_assert(ir->rst);
}
static int __maybe_unused sunxi_ir_suspend(struct device *dev)
{
sunxi_ir_hw_exit(dev);
return 0;
}
static int __maybe_unused sunxi_ir_resume(struct device *dev)
{
return sunxi_ir_hw_init(dev);
}
static SIMPLE_DEV_PM_OPS(sunxi_ir_pm_ops, sunxi_ir_suspend, sunxi_ir_resume);
static int sunxi_ir_probe(struct platform_device *pdev)
{
int ret = 0;
struct device *dev = &pdev->dev;
struct device_node *dn = dev->of_node;
const struct sunxi_ir_quirks *quirks;
struct sunxi_ir *ir;
u32 b_clk_freq = SUNXI_IR_BASE_CLK;
ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL);
if (!ir)
return -ENOMEM;
quirks = of_device_get_match_data(&pdev->dev);
if (!quirks) {
dev_err(&pdev->dev, "Failed to determine the quirks to use\n");
return -ENODEV;
}
ir->fifo_size = quirks->fifo_size;
/* Clock */
ir->apb_clk = devm_clk_get(dev, "apb");
if (IS_ERR(ir->apb_clk)) {
dev_err(dev, "failed to get a apb clock.\n");
return PTR_ERR(ir->apb_clk);
}
ir->clk = devm_clk_get(dev, "ir");
if (IS_ERR(ir->clk)) {
dev_err(dev, "failed to get a ir clock.\n");
return PTR_ERR(ir->clk);
}
/* Base clock frequency (optional) */
of_property_read_u32(dn, "clock-frequency", &b_clk_freq);
/* Reset */
if (quirks->has_reset) {
ir->rst = devm_reset_control_get_exclusive(dev, NULL);
if (IS_ERR(ir->rst))
return PTR_ERR(ir->rst);
}
ret = clk_set_rate(ir->clk, b_clk_freq);
if (ret) {
dev_err(dev, "set ir base clock failed!\n");
return ret;
}
dev_dbg(dev, "set base clock frequency to %d Hz.\n", b_clk_freq);
/* IO */
ir->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(ir->base)) {
return PTR_ERR(ir->base);
}
ir->rc = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!ir->rc) {
dev_err(dev, "failed to allocate device\n");
return -ENOMEM;
}
ir->rc->priv = ir;
ir->rc->device_name = SUNXI_IR_DEV;
ir->rc->input_phys = "sunxi-ir/input0";
ir->rc->input_id.bustype = BUS_HOST;
ir->rc->input_id.vendor = 0x0001;
ir->rc->input_id.product = 0x0001;
ir->rc->input_id.version = 0x0100;
ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
ir->rc->dev.parent = dev;
ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
/* Frequency after IR internal divider with sample period in us */
media: rc: harmonize infrared durations to microseconds rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-23 17:23:05 +00:00
ir->rc->rx_resolution = (USEC_PER_SEC / (b_clk_freq / 64));
ir->rc->timeout = IR_DEFAULT_TIMEOUT;
ir->rc->min_timeout = sunxi_ithr_to_usec(b_clk_freq, 0);
ir->rc->max_timeout = sunxi_ithr_to_usec(b_clk_freq, 255);
ir->rc->s_timeout = sunxi_ir_set_timeout;
ir->rc->driver_name = SUNXI_IR_DEV;
ret = rc_register_device(ir->rc);
if (ret) {
dev_err(dev, "failed to register rc device\n");
goto exit_free_dev;
}
platform_set_drvdata(pdev, ir);
/* IRQ */
ir->irq = platform_get_irq(pdev, 0);
if (ir->irq < 0) {
ret = ir->irq;
goto exit_free_dev;
}
ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir);
if (ret) {
dev_err(dev, "failed request irq\n");
goto exit_free_dev;
}
ret = sunxi_ir_hw_init(dev);
if (ret)
goto exit_free_dev;
dev_info(dev, "initialized sunXi IR driver\n");
return 0;
exit_free_dev:
rc_free_device(ir->rc);
return ret;
}
static int sunxi_ir_remove(struct platform_device *pdev)
{
struct sunxi_ir *ir = platform_get_drvdata(pdev);
rc_unregister_device(ir->rc);
sunxi_ir_hw_exit(&pdev->dev);
return 0;
}
static void sunxi_ir_shutdown(struct platform_device *pdev)
{
sunxi_ir_hw_exit(&pdev->dev);
}
static const struct sunxi_ir_quirks sun4i_a10_ir_quirks = {
.has_reset = false,
.fifo_size = 16,
};
static const struct sunxi_ir_quirks sun5i_a13_ir_quirks = {
.has_reset = false,
.fifo_size = 64,
};
static const struct sunxi_ir_quirks sun6i_a31_ir_quirks = {
.has_reset = true,
.fifo_size = 64,
};
static const struct of_device_id sunxi_ir_match[] = {
{
.compatible = "allwinner,sun4i-a10-ir",
.data = &sun4i_a10_ir_quirks,
},
{
.compatible = "allwinner,sun5i-a13-ir",
.data = &sun5i_a13_ir_quirks,
},
{
.compatible = "allwinner,sun6i-a31-ir",
.data = &sun6i_a31_ir_quirks,
},
{}
};
MODULE_DEVICE_TABLE(of, sunxi_ir_match);
static struct platform_driver sunxi_ir_driver = {
.probe = sunxi_ir_probe,
.remove = sunxi_ir_remove,
.shutdown = sunxi_ir_shutdown,
.driver = {
.name = SUNXI_IR_DEV,
.of_match_table = sunxi_ir_match,
.pm = &sunxi_ir_pm_ops,
},
};
module_platform_driver(sunxi_ir_driver);
MODULE_DESCRIPTION("Allwinner sunXi IR controller driver");
MODULE_AUTHOR("Alexsey Shestacov <wingrime@linux-sunxi.org>");
MODULE_LICENSE("GPL");