mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity
linux-stable/arch/s390/kernel/entry.S

652 lines
18 KiB
ArmAsm
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* S390 low-level entry points.
*
s390/comments: unify copyright messages and remove file names Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-20 09:15:04 +00:00
* Copyright IBM Corp. 1999, 2012
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
[S390] Whitespace cleanup. Huge s390 assembly files whitespace cleanup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-28 14:56:37 +00:00
* Hartmut Penner (hp@de.ibm.com),
* Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
s390: replace #include <asm/export.h> with #include <linux/export.h> Commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost") deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>. Replace #include <asm/export.h> with #include <linux/export.h>. After all the <asm/export.h> lines are converted, <asm/export.h> and <asm-generic/export.h> will be removed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20230806151641.394720-2-masahiroy@kernel.org Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-06 15:16:39 +00:00
#include <linux/export.h>
[S390] Fix couple of section mismatches. Fix couple of section mismatches. And since we touch the code anyway change the IPL code to use C99 initializers. Cc: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05 15:50:40 +00:00
#include <linux/init.h>
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 08:48:19 +00:00
#include <linux/linkage.h>
s390/extable: move EX_TABLE define to asm-extable.h Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h which is a lot less generic than the current linkage.h. Also make sure that all files which contain EX_TABLE usages actually include the new header file. This should make sure that the files always compile and there won't be any random compile breakage due to other header file dependencies. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-28 10:22:12 +00:00
#include <asm/asm-extable.h>
s390/entry.S: use assembler alternatives Replace the open coded alternatives for the BPOFF, BPON, BPENTER, and BPEXIT macros with the new magic from asm/alternatives-asm.h to make the code easier to read. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-26 13:27:36 +00:00
#include <asm/alternative-asm.h>
s390/exceptions: switch to relative exception table entries This is the s390 port of 70627654 "x86, extable: Switch to relative exception table entries". Reduces the size of our exception tables by 50% on 64 bit builds. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-05 11:26:11 +00:00
#include <asm/processor.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/cache.h>
s390/clean-up: use CFI_* macros in entry.S Commit f19fbd5ed642 ("s390: introduce execute-trampolines for branches") introduces .cfi_* assembler directives. Instead of using the directives directly, use the macros from asm/dwarf.h. This also ensures that the dwarf debug information are created in the .debug_frame section. Fixes: f19fbd5ed642 ("s390: introduce execute-trampolines for branches") Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-02-19 10:27:09 +00:00
#include <asm/dwarf.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/errno.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
kbuild: m68k,parisc,ppc,ppc64,s390,xtensa use generic asm-offsets.h support Delete obsoleted parts form arch makefiles and rename to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 18:57:26 +00:00
#include <asm/asm-offsets.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/unistd.h>
#include <asm/page.h>
s390/sigp: use sigp order code defines in assembly code Use sigp order code defines in assembly code as well. With this change all places that use sigp constants should have been converted to use self describing defines instead of directly using constants. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-04 13:05:43 +00:00
#include <asm/sigp.h>
s390: convert interrupt handling to use generic hardirq With the introduction of PCI it became apparent that s390 should convert to generic hardirqs as too many drivers do not have the correct dependency for GENERIC_HARDIRQS. On the architecture level s390 does not have irq lines. It has external interrupts, I/O interrupts and adapter interrupts. This patch hard-codes all external interrupts as irq #1, all I/O interrupts as irq #2 and all adapter interrupts as irq #3. The additional information from the lowcore associated with the interrupt is stored in the pt_regs of the interrupt frame, where the interrupt handler can pick it up. For PCI/MSI interrupts the adapter interrupt handler scans the relevant bit fields and calls generic_handle_irq with the virtual irq number for the MSI interrupt. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-27 07:01:09 +00:00
#include <asm/irq.h>
s390/fpu: move, rename, and merge header files Move, rename, and merge the fpu and vx header files. This way fpu header files have a consistent naming scheme (fpu*.h). Also get rid of the fpu subdirectory and move header files to asm directory, so that all fpu and vx header files can be found at the same location. Merge internal.h header file into other header files, since the internal helpers are used at many locations. so those helper functions are really not internal. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-03 10:45:02 +00:00
#include <asm/fpu-insn.h>
s390/entry: add assembler macro to conveniently tests under mask Various functions in entry.S perform test-under-mask instructions to test for particular bits in memory. Because test-under-mask uses a mask value of one byte, the mask value and the offset into the memory must be calculated manually. This easily introduces errors and is hard to review and read. Introduce the TSTMSK assembler macro to specify a mask constant and let the macro calculate the offset and the byte mask to generate a test-under-mask instruction. The benefit is that existing symbolic constants can now be used for tests. Also the macro checks for zero mask values and mask values that consist of multiple bytes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-01 15:02:48 +00:00
#include <asm/setup.h>
#include <asm/nmi.h>
s390: move expoline assembler macros to a header To be able to use the expoline branches in different assembler files move the associated macros from entry.S to a new header nospec-insn.h. While we are at it make the macros a bit nicer to use. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-20 14:49:46 +00:00
#include <asm/nospec-insn.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
s390/lpp: use assembler alternatives for the LPP instruction With the new macros for CPU alternatives the MACHINE_FLAG_LPP check around the LPP instruction can be optimized. After this is done the flag can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-26 13:23:33 +00:00
_LPP_OFFSET = __LC_LPP
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
.macro STBEAR address
s390/alternatives: provide identical sized orginal/alternative sequences Explicitly provide identical sized original/alternative instruction sequences. This way there is no need for the s390 specific alternatives infrastructure to generate padding sequences. The code which generates such sequences will be removed with a follow on patch. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220511120532.2228616-2-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-11 12:05:25 +00:00
ALTERNATIVE "nop", ".insn s,0xb2010000,\address", 193
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
.endm
.macro LBEAR address
s390/alternatives: provide identical sized orginal/alternative sequences Explicitly provide identical sized original/alternative instruction sequences. This way there is no need for the s390 specific alternatives infrastructure to generate padding sequences. The code which generates such sequences will be removed with a follow on patch. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220511120532.2228616-2-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-11 12:05:25 +00:00
ALTERNATIVE "nop", ".insn s,0xb2000000,\address", 193
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
.endm
.macro LPSWEY address,lpswe
s390/alternatives: provide identical sized orginal/alternative sequences Explicitly provide identical sized original/alternative instruction sequences. This way there is no need for the s390 specific alternatives infrastructure to generate padding sequences. The code which generates such sequences will be removed with a follow on patch. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220511120532.2228616-2-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-11 12:05:25 +00:00
ALTERNATIVE "b \lpswe; nopr", ".insn siy,0xeb0000000071,\address,0", 193
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
.endm
.macro MBEAR reg
s390/alternatives: provide identical sized orginal/alternative sequences Explicitly provide identical sized original/alternative instruction sequences. This way there is no need for the s390 specific alternatives infrastructure to generate padding sequences. The code which generates such sequences will be removed with a follow on patch. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220511120532.2228616-2-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-11 12:05:25 +00:00
ALTERNATIVE "brcl 0,0", __stringify(mvc __PT_LAST_BREAK(8,\reg),__LC_LAST_BREAK), 193
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
.endm
s390: add support for virtually mapped kernel stacks With virtually mapped kernel stacks the kernel stack overflow detection is now fault based, every stack has a guard page in the vmalloc space. The panic_stack is renamed to nodat_stack and is used for all function that need to run without DAT, e.g. memcpy_real or do_start_kdump. The main effect is a reduction in the kernel image size as with vmap stacks the old style overflow checking that adds two instructions per function is not needed anymore. Result from bloat-o-meter: add/remove: 20/1 grow/shrink: 13/26854 up/down: 2198/-216240 (-214042) In regard to performance the micro-benchmark for fork has a hit of a few microseconds, allocating 4 pages in vmalloc space is more expensive compare to an order-2 page allocation. But with real workload I could not find a noticeable difference. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-12 14:37:33 +00:00
.macro CHECK_STACK savearea
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 12:58:05 +00:00
#ifdef CONFIG_CHECK_STACK
s390/stack: use STACK_INIT_OFFSET where possible Make STACK_INIT_OFFSET also available for assembler code, and use it everywhere instead of open-coding it at several places. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27 09:37:22 +00:00
tml %r15,THREAD_SIZE - CONFIG_STACK_GUARD
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
lghi %r14,\savearea
jz stack_overflow
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 12:58:05 +00:00
#endif
.endm
s390: add support for virtually mapped kernel stacks With virtually mapped kernel stacks the kernel stack overflow detection is now fault based, every stack has a guard page in the vmalloc space. The panic_stack is renamed to nodat_stack and is used for all function that need to run without DAT, e.g. memcpy_real or do_start_kdump. The main effect is a reduction in the kernel image size as with vmap stacks the old style overflow checking that adds two instructions per function is not needed anymore. Result from bloat-o-meter: add/remove: 20/1 grow/shrink: 13/26854 up/down: 2198/-216240 (-214042) In regard to performance the micro-benchmark for fork has a hit of a few microseconds, allocating 4 pages in vmalloc space is more expensive compare to an order-2 page allocation. But with real workload I could not find a noticeable difference. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-12 14:37:33 +00:00
.macro CHECK_VMAP_STACK savearea,oklabel
#ifdef CONFIG_VMAP_STACK
lgr %r14,%r15
s390/stack: use STACK_INIT_OFFSET where possible Make STACK_INIT_OFFSET also available for assembler code, and use it everywhere instead of open-coding it at several places. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27 09:37:22 +00:00
nill %r14,0x10000 - THREAD_SIZE
oill %r14,STACK_INIT_OFFSET
s390: add support for virtually mapped kernel stacks With virtually mapped kernel stacks the kernel stack overflow detection is now fault based, every stack has a guard page in the vmalloc space. The panic_stack is renamed to nodat_stack and is used for all function that need to run without DAT, e.g. memcpy_real or do_start_kdump. The main effect is a reduction in the kernel image size as with vmap stacks the old style overflow checking that adds two instructions per function is not needed anymore. Result from bloat-o-meter: add/remove: 20/1 grow/shrink: 13/26854 up/down: 2198/-216240 (-214042) In regard to performance the micro-benchmark for fork has a hit of a few microseconds, allocating 4 pages in vmalloc space is more expensive compare to an order-2 page allocation. But with real workload I could not find a noticeable difference. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-12 14:37:33 +00:00
clg %r14,__LC_KERNEL_STACK
je \oklabel
clg %r14,__LC_ASYNC_STACK
je \oklabel
s390: add stack for machine check handler The previous code used the normal kernel stack for machine checks. This is problematic when a machine check interrupts a system call or interrupt handler right at the beginning where registers are set up. Assume system_call is interrupted at the first instruction and a machine check is triggered. The machine check handler is called, checks the PSW to see whether it is coming from user space, notices that it is already in kernel mode but %r15 still contains the user space stack. This would lead to a kernel crash. There are basically two ways of fixing that: Either using the 'critical cleanup' approach which compares the address in the PSW to see whether it is already at a point where the stack has been set up, or use an extra stack for the machine check handler. For simplicity, we will go with the second approach and allocate an extra stack. This adds some memory overhead for large systems, but usually large system have plenty of memory so this isn't really a concern. But it keeps the mchk stack setup simple and less error prone. Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Cc: <stable@kernel.org> # v5.8+ Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-02-03 08:02:51 +00:00
clg %r14,__LC_MCCK_STACK
je \oklabel
s390: add support for virtually mapped kernel stacks With virtually mapped kernel stacks the kernel stack overflow detection is now fault based, every stack has a guard page in the vmalloc space. The panic_stack is renamed to nodat_stack and is used for all function that need to run without DAT, e.g. memcpy_real or do_start_kdump. The main effect is a reduction in the kernel image size as with vmap stacks the old style overflow checking that adds two instructions per function is not needed anymore. Result from bloat-o-meter: add/remove: 20/1 grow/shrink: 13/26854 up/down: 2198/-216240 (-214042) In regard to performance the micro-benchmark for fork has a hit of a few microseconds, allocating 4 pages in vmalloc space is more expensive compare to an order-2 page allocation. But with real workload I could not find a noticeable difference. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-12 14:37:33 +00:00
clg %r14,__LC_NODAT_STACK
je \oklabel
clg %r14,__LC_RESTART_STACK
je \oklabel
lghi %r14,\savearea
j stack_overflow
#else
j \oklabel
#endif
.endm
s390/entry: add assembler macro to conveniently tests under mask Various functions in entry.S perform test-under-mask instructions to test for particular bits in memory. Because test-under-mask uses a mask value of one byte, the mask value and the offset into the memory must be calculated manually. This easily introduces errors and is hard to review and read. Introduce the TSTMSK assembler macro to specify a mask constant and let the macro calculate the offset and the byte mask to generate a test-under-mask instruction. The benefit is that existing symbolic constants can now be used for tests. Also the macro checks for zero mask values and mask values that consist of multiple bytes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-01 15:02:48 +00:00
/*
* The TSTMSK macro generates a test-under-mask instruction by
* calculating the memory offset for the specified mask value.
* Mask value can be any constant. The macro shifts the mask
* value to calculate the memory offset for the test-under-mask
* instruction.
*/
.macro TSTMSK addr, mask, size=8, bytepos=0
.if (\bytepos < \size) && (\mask >> 8)
.if (\mask & 0xff)
.error "Mask exceeds byte boundary"
.endif
TSTMSK \addr, "(\mask >> 8)", \size, "(\bytepos + 1)"
.exitm
.endif
.ifeq \mask
.error "Mask must not be zero"
.endif
off = \size - \bytepos - 1
tm off+\addr, \mask
.endm
s390: add options to change branch prediction behaviour for the kernel Add the PPA instruction to the system entry and exit path to switch the kernel to a different branch prediction behaviour. The instructions are added via CPU alternatives and can be disabled with the "nospec" or the "nobp=0" kernel parameter. If the default behaviour selected with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be used to enable the changed kernel branch prediction. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:11:45 +00:00
.macro BPOFF
s390/alternatives: provide identical sized orginal/alternative sequences Explicitly provide identical sized original/alternative instruction sequences. This way there is no need for the s390 specific alternatives infrastructure to generate padding sequences. The code which generates such sequences will be removed with a follow on patch. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220511120532.2228616-2-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-11 12:05:25 +00:00
ALTERNATIVE "nop", ".insn rrf,0xb2e80000,0,0,12,0", 82
s390: add options to change branch prediction behaviour for the kernel Add the PPA instruction to the system entry and exit path to switch the kernel to a different branch prediction behaviour. The instructions are added via CPU alternatives and can be disabled with the "nospec" or the "nobp=0" kernel parameter. If the default behaviour selected with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be used to enable the changed kernel branch prediction. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:11:45 +00:00
.endm
.macro BPON
s390/alternatives: provide identical sized orginal/alternative sequences Explicitly provide identical sized original/alternative instruction sequences. This way there is no need for the s390 specific alternatives infrastructure to generate padding sequences. The code which generates such sequences will be removed with a follow on patch. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220511120532.2228616-2-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-11 12:05:25 +00:00
ALTERNATIVE "nop", ".insn rrf,0xb2e80000,0,0,13,0", 82
s390: add options to change branch prediction behaviour for the kernel Add the PPA instruction to the system entry and exit path to switch the kernel to a different branch prediction behaviour. The instructions are added via CPU alternatives and can be disabled with the "nospec" or the "nobp=0" kernel parameter. If the default behaviour selected with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be used to enable the changed kernel branch prediction. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:11:45 +00:00
.endm
s390: run user space and KVM guests with modified branch prediction Define TIF_ISOLATE_BP and TIF_ISOLATE_BP_GUEST and add the necessary plumbing in entry.S to be able to run user space and KVM guests with limited branch prediction. To switch a user space process to limited branch prediction the s390_isolate_bp() function has to be call, and to run a vCPU of a KVM guest associated with the current task with limited branch prediction call s390_isolate_bp_guest(). Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:36:46 +00:00
.macro BPENTER tif_ptr,tif_mask
s390/alternatives: use insn format for new instructions Use insn format with instruction format specifier instead of plain longs. This way it is also more obvious that code instead of data is generated. The generated code is identical. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-13 21:39:27 +00:00
ALTERNATIVE "TSTMSK \tif_ptr,\tif_mask; jz .+8; .insn rrf,0xb2e80000,0,0,13,0", \
s390/alternatives: provide identical sized orginal/alternative sequences Explicitly provide identical sized original/alternative instruction sequences. This way there is no need for the s390 specific alternatives infrastructure to generate padding sequences. The code which generates such sequences will be removed with a follow on patch. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220511120532.2228616-2-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-11 12:05:25 +00:00
"j .+12; nop; nop", 82
s390: run user space and KVM guests with modified branch prediction Define TIF_ISOLATE_BP and TIF_ISOLATE_BP_GUEST and add the necessary plumbing in entry.S to be able to run user space and KVM guests with limited branch prediction. To switch a user space process to limited branch prediction the s390_isolate_bp() function has to be call, and to run a vCPU of a KVM guest associated with the current task with limited branch prediction call s390_isolate_bp_guest(). Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:36:46 +00:00
.endm
.macro BPEXIT tif_ptr,tif_mask
TSTMSK \tif_ptr,\tif_mask
s390/alternatives: use insn format for new instructions Use insn format with instruction format specifier instead of plain longs. This way it is also more obvious that code instead of data is generated. The generated code is identical. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-13 21:39:27 +00:00
ALTERNATIVE "jz .+8; .insn rrf,0xb2e80000,0,0,12,0", \
"jnz .+8; .insn rrf,0xb2e80000,0,0,13,0", 82
s390: run user space and KVM guests with modified branch prediction Define TIF_ISOLATE_BP and TIF_ISOLATE_BP_GUEST and add the necessary plumbing in entry.S to be able to run user space and KVM guests with limited branch prediction. To switch a user space process to limited branch prediction the s390_isolate_bp() function has to be call, and to run a vCPU of a KVM guest associated with the current task with limited branch prediction call s390_isolate_bp_guest(). Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:36:46 +00:00
.endm
s390/entry.S: factor out OUTSIDE macro Introduce OUTSIDE macro that checks whether an instruction address is inside or outside of a block of instructions. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-07 10:01:49 +00:00
#if IS_ENABLED(CONFIG_KVM)
s390/entry: compare gmap asce to determine guest/host fault With the current implementation, there are some cornercases where a host fault would be treated as a guest fault, for example when the sie instruction causes a program check. Therefore store the gmap asce in ptregs, and use that to compare the primary asce from the fault instead of matching instruction addresses. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-03-13 08:51:22 +00:00
.macro SIEEXIT sie_control
lg %r9,\sie_control # get control block pointer
s390/entry.S: factor out SIEEXIT macro Factor out SIEEXIT macro and use it instead of cleanup_sie routine. As a side effect %r13 and %r14 are spared. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Christia Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 06:17:13 +00:00
ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE
lctlg %c1,%c1,__LC_KERNEL_ASCE # load primary asce
s390/entry: add CIF_SIE flag and remove sie64a() address check When a program check, interrupt or machine check is triggered, the PSW address is compared to a certain range of the sie64a() function to figure out whether SIE was interrupted and a cleanup of SIE is needed. This doesn't work with kprobes: If kprobes probes an instruction, it copies the instruction to the kprobes instruction page and overwrites the original instruction with an undefind instruction (Opcode 00). When this instruction is hit later, kprobes single-steps the instruction on the kprobes_instruction page. However, if this instruction is a relative branch instruction it will now point to a different location in memory due to being moved to the kprobes instruction page. If the new branch target points into sie64a() the kernel assumes it interrupted SIE when processing the breakpoint and will crash trying to access the SIE control block. Instead of comparing the address, introduce a new CIF_SIE flag which indicates whether SIE was interrupted. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-20 13:21:14 +00:00
ni __LC_CPU_FLAGS+7,255-_CIF_SIE
s390/entry.S: factor out SIEEXIT macro Factor out SIEEXIT macro and use it instead of cleanup_sie routine. As a side effect %r13 and %r14 are spared. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Christia Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 06:17:13 +00:00
larl %r9,sie_exit # skip forward to sie_exit
.endm
s390/entry.S: factor out OUTSIDE macro Introduce OUTSIDE macro that checks whether an instruction address is inside or outside of a block of instructions. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-07 10:01:49 +00:00
#endif
s390: enable HAVE_ARCH_STACKLEAK Add support for the stackleak feature. Whenever the kernel returns to user space the kernel stack is filled with a poison value. Enabling this feature is quite expensive: e.g. after instrumenting the getpid() system call function to have a 4kb stack the result is an increased runtime of the system call by a factor of 3. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27 09:37:28 +00:00
.macro STACKLEAK_ERASE
#ifdef CONFIG_GCC_PLUGIN_STACKLEAK
brasl %r14,stackleak_erase_on_task_stack
#endif
.endm
s390: move expoline assembler macros to a header To be able to use the expoline branches in different assembler files move the associated macros from entry.S to a new header nospec-insn.h. While we are at it make the macros a bit nicer to use. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-20 14:49:46 +00:00
GEN_BR_THUNK %r14
s390: introduce execute-trampolines for branches Add CONFIG_EXPOLINE to enable the use of the new -mindirect-branch= and -mfunction_return= compiler options to create a kernel fortified against the specte v2 attack. With CONFIG_EXPOLINE=y all indirect branches will be issued with an execute type instruction. For z10 or newer the EXRL instruction will be used, for older machines the EX instruction. The typical indirect call basr %r14,%r1 is replaced with a PC relative call to a new thunk brasl %r14,__s390x_indirect_jump_r1 The thunk contains the EXRL/EX instruction to the indirect branch __s390x_indirect_jump_r1: exrl 0,0f j . 0: br %r1 The detour via the execute type instruction has a performance impact. To get rid of the detour the new kernel parameter "nospectre_v2" and "spectre_v2=[on,off,auto]" can be used. If the parameter is specified the kernel and module code will be patched at runtime. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-26 11:46:47 +00:00
[S390] add kprobes annotations Add kprobes annotations to get the massive 'probe kernel.function("*") {}' stress test working. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05 11:47:25 +00:00
.section .kprobes.text, "ax"
s390: have unique symbol for __switch_to address After linking there are several symbols for the same address that the __switch_to symbol points to. E.g.: 000000000089b9c0 T __kprobes_text_start 000000000089b9c0 T __lock_text_end 000000000089b9c0 T __lock_text_start 000000000089b9c0 T __sched_text_end 000000000089b9c0 T __switch_to When disassembling with "objdump -d" this results in a missing __switch_to function. It would be named __kprobes_text_start instead. To unconfuse objdump add a nop in front of the kprobes text section. That way __switch_to appears again. Obviously this solution is sort of a hack, since it also depends on link order if this works or not. However it is the best I can come up with for now. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-30 10:40:25 +00:00
.Ldummy:
/*
s390/bp: remove __bpon() There is no point in changing branch prediction state of a cpu shortly before it enters stop state. Therefore remove __bpon(). Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-02-28 12:57:50 +00:00
* The following nop exists only in order to avoid that the next
* symbol starts at the beginning of the kprobes text section.
* In that case there would be several symbols at the same address.
* E.g. objdump would take an arbitrary symbol when disassembling
* the code.
* With the added nop in between this cannot happen.
s390: have unique symbol for __switch_to address After linking there are several symbols for the same address that the __switch_to symbol points to. E.g.: 000000000089b9c0 T __kprobes_text_start 000000000089b9c0 T __lock_text_end 000000000089b9c0 T __lock_text_start 000000000089b9c0 T __sched_text_end 000000000089b9c0 T __switch_to When disassembling with "objdump -d" this results in a missing __switch_to function. It would be named __kprobes_text_start instead. To unconfuse objdump add a nop in front of the kprobes text section. That way __switch_to appears again. Obviously this solution is sort of a hack, since it also depends on link order if this works or not. However it is the best I can come up with for now. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-30 10:40:25 +00:00
*/
nop 0
[S390] add kprobes annotations Add kprobes annotations to get the massive 'probe kernel.function("*") {}' stress test working. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05 11:47:25 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
s390/switch_to: use generic header file Move the switch_to() implementation to process.c and use the generic switch_to.h header file instead, like some other architectures. This addresses also the oddity that the old switch_to() implementation assigns the return value of __switch_to() to 'prev' instead of 'last', like it should. Remove also all includes of switch_to.h from C files, except process.c. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-05 20:32:13 +00:00
* Scheduler resume function, called by __switch_to
* gpr2 = (task_struct *)prev
* gpr3 = (task_struct *)next
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* Returns:
* gpr2 = prev
*/
s390/switch_to: use generic header file Move the switch_to() implementation to process.c and use the generic switch_to.h header file instead, like some other architectures. This addresses also the oddity that the old switch_to() implementation assigns the return value of __switch_to() to 'prev' instead of 'last', like it should. Remove also all includes of switch_to.h from C files, except process.c. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-05 20:32:13 +00:00
SYM_FUNC_START(__switch_to_asm)
s390: fix race on TIF_MCCK_PENDING There is a small race window in the __switch_to code in regard to the transfer of the TIF_MCCK_PENDING bit from the previous to the next task. The bit is transferred before the task struct pointer and the thread-info pointer for the next task has been stored to lowcore. If a machine check sets the TIF_MCCK_PENDING bit between the transfer code and the store of current/thread_info the bit is still set for the previous task. And if the previous task has terminated it can get lost. The effect is that a pending CRW is not retrieved until the next machine checks sets TIF_MCCK_PENDING. To fix this reorder __switch_to to first store the task struct and thread-info pointer and then do the transfer of the bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-15 07:20:06 +00:00
stmg %r6,%r15,__SF_GPRS(%r15) # store gprs of prev task
s390: rework __switch_to() to allow larger task_struct offsets If GCC_PLUGIN_RANDSTRUCT is enabled the members of task_struct will be shuffled around. The offsets of the "pid" and "stack" members within task_struct may not necessarily fit into 12 bits anymore, which causes compile errors within __switch_to, since instructions are used, which only have a 12 bit displacement field. Therefore rework __switch_to, to allow for larger offsets. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-16 13:54:04 +00:00
lghi %r4,__TASK_stack
lghi %r1,__TASK_thread
s390/stack: use STACK_INIT_OFFSET where possible Make STACK_INIT_OFFSET also available for assembler code, and use it everywhere instead of open-coding it at several places. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27 09:37:22 +00:00
llill %r5,STACK_INIT_OFFSET
s390: rework __switch_to() to allow larger task_struct offsets If GCC_PLUGIN_RANDSTRUCT is enabled the members of task_struct will be shuffled around. The offsets of the "pid" and "stack" members within task_struct may not necessarily fit into 12 bits anymore, which causes compile errors within __switch_to, since instructions are used, which only have a 12 bit displacement field. Therefore rework __switch_to, to allow for larger offsets. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-16 13:54:04 +00:00
stg %r15,__THREAD_ksp(%r1,%r2) # store kernel stack of prev
s390/kasan: increase instrumented stack size to 64k Increase kasan instrumented kernel stack size from 32k to 64k. Other architectures seems to get away with just doubling kernel stack size under kasan, but on s390 this appears to be not enough due to bigger frame size. The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting stack overflow is fs sync on xfs filesystem: #0 [9a0681e8] 704 bytes check_usage at 34b1fc #1 [9a0684a8] 432 bytes check_usage at 34c710 #2 [9a068658] 1048 bytes validate_chain at 35044a #3 [9a068a70] 312 bytes __lock_acquire at 3559fe #4 [9a068ba8] 440 bytes lock_acquire at 3576ee #5 [9a068d60] 104 bytes _raw_spin_lock at 21b44e0 #6 [9a068dc8] 1992 bytes enqueue_entity at 2dbf72 #7 [9a069590] 1496 bytes enqueue_task_fair at 2df5f0 #8 [9a069b68] 64 bytes ttwu_do_activate at 28f438 #9 [9a069ba8] 552 bytes try_to_wake_up at 298c4c #10 [9a069dd0] 168 bytes wake_up_worker at 23f97c #11 [9a069e78] 200 bytes insert_work at 23fc2e #12 [9a069f40] 648 bytes __queue_work at 2487c0 #13 [9a06a1c8] 200 bytes __queue_delayed_work at 24db28 #14 [9a06a290] 248 bytes mod_delayed_work_on at 24de84 #15 [9a06a388] 24 bytes kblockd_mod_delayed_work_on at 153e2a0 #16 [9a06a3a0] 288 bytes __blk_mq_delay_run_hw_queue at 158168c #17 [9a06a4c0] 192 bytes blk_mq_run_hw_queue at 1581a3c #18 [9a06a580] 184 bytes blk_mq_sched_insert_requests at 15a2192 #19 [9a06a638] 1024 bytes blk_mq_flush_plug_list at 1590f3a #20 [9a06aa38] 704 bytes blk_flush_plug_list at 1555028 #21 [9a06acf8] 320 bytes schedule at 219e476 #22 [9a06ae38] 760 bytes schedule_timeout at 21b0aac #23 [9a06b130] 408 bytes wait_for_common at 21a1706 #24 [9a06b2c8] 360 bytes xfs_buf_iowait at fa1540 #25 [9a06b430] 256 bytes __xfs_buf_submit at fadae6 #26 [9a06b530] 264 bytes xfs_buf_read_map at fae3f6 #27 [9a06b638] 656 bytes xfs_trans_read_buf_map at 10ac9a8 #28 [9a06b8c8] 304 bytes xfs_btree_kill_root at e72426 #29 [9a06b9f8] 288 bytes xfs_btree_lookup_get_block at e7bc5e #30 [9a06bb18] 624 bytes xfs_btree_lookup at e7e1a6 #31 [9a06bd88] 2664 bytes xfs_alloc_ag_vextent_near at dfa070 #32 [9a06c7f0] 144 bytes xfs_alloc_ag_vextent at dff3ca #33 [9a06c880] 1128 bytes xfs_alloc_vextent at e05fce #34 [9a06cce8] 584 bytes xfs_bmap_btalloc at e58342 #35 [9a06cf30] 1336 bytes xfs_bmapi_write at e618de #36 [9a06d468] 776 bytes xfs_iomap_write_allocate at ff678e #37 [9a06d770] 720 bytes xfs_map_blocks at f82af8 #38 [9a06da40] 928 bytes xfs_writepage_map at f83cd6 #39 [9a06dde0] 320 bytes xfs_do_writepage at f85872 #40 [9a06df20] 1320 bytes write_cache_pages at 73dfe8 #41 [9a06e448] 208 bytes xfs_vm_writepages at f7f892 #42 [9a06e518] 88 bytes do_writepages at 73fe6a #43 [9a06e570] 872 bytes __writeback_single_inode at a20cb6 #44 [9a06e8d8] 664 bytes writeback_sb_inodes at a23be2 #45 [9a06eb70] 296 bytes __writeback_inodes_wb at a242e0 #46 [9a06ec98] 928 bytes wb_writeback at a2500e #47 [9a06f038] 848 bytes wb_do_writeback at a260ae #48 [9a06f388] 536 bytes wb_workfn at a28228 #49 [9a06f5a0] 1088 bytes process_one_work at 24a234 #50 [9a06f9e0] 1120 bytes worker_thread at 24ba26 #51 [9a06fe40] 104 bytes kthread at 26545a #52 [9a06fea8] kernel_thread_starter at 21b6b62 To be able to increase the stack size to 64k reuse LLILL instruction in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE (65192) value as unsigned. Reported-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-26 13:29:59 +00:00
lg %r15,0(%r4,%r3) # start of kernel stack of next
agr %r15,%r5 # end of kernel stack of next
s390: fix race on TIF_MCCK_PENDING There is a small race window in the __switch_to code in regard to the transfer of the TIF_MCCK_PENDING bit from the previous to the next task. The bit is transferred before the task struct pointer and the thread-info pointer for the next task has been stored to lowcore. If a machine check sets the TIF_MCCK_PENDING bit between the transfer code and the store of current/thread_info the bit is still set for the previous task. And if the previous task has terminated it can get lost. The effect is that a pending CRW is not retrieved until the next machine checks sets TIF_MCCK_PENDING. To fix this reorder __switch_to to first store the task struct and thread-info pointer and then do the transfer of the bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-15 07:20:06 +00:00
stg %r3,__LC_CURRENT # store task struct of next
stg %r15,__LC_KERNEL_STACK # store end of kernel stack
s390: rework __switch_to() to allow larger task_struct offsets If GCC_PLUGIN_RANDSTRUCT is enabled the members of task_struct will be shuffled around. The offsets of the "pid" and "stack" members within task_struct may not necessarily fit into 12 bits anymore, which causes compile errors within __switch_to, since instructions are used, which only have a 12 bit displacement field. Therefore rework __switch_to, to allow for larger offsets. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-16 13:54:04 +00:00
lg %r15,__THREAD_ksp(%r1,%r3) # load kernel stack of next
aghi %r3,__TASK_pid
mvc __LC_CURRENT_PID(4,%r0),0(%r3) # store pid of next
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 10:55:07 +00:00
lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task
s390/alternatives: provide identical sized orginal/alternative sequences Explicitly provide identical sized original/alternative instruction sequences. This way there is no need for the s390 specific alternatives infrastructure to generate padding sequences. The code which generates such sequences will be removed with a follow on patch. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220511120532.2228616-2-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-11 12:05:25 +00:00
ALTERNATIVE "nop", "lpp _LPP_OFFSET", 40
s390: move expoline assembler macros to a header To be able to use the expoline branches in different assembler files move the associated macros from entry.S to a new header nospec-insn.h. While we are at it make the macros a bit nicer to use. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-20 14:49:46 +00:00
BR_EX %r14
s390/switch_to: use generic header file Move the switch_to() implementation to process.c and use the generic switch_to.h header file instead, like some other architectures. This addresses also the oddity that the old switch_to() implementation assigns the return value of __switch_to() to 'prev' instead of 'last', like it should. Remove also all includes of switch_to.h from C files, except process.c. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-05 20:32:13 +00:00
SYM_FUNC_END(__switch_to_asm)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
#if IS_ENABLED(CONFIG_KVM)
/*
s390/entry: sort out physical vs virtual pointers usage in sie64a Fix virtual vs physical address confusion (which currently are the same). sie_block is accessed in entry.S and passed it to hardware, which is why both its physical and virtual address are needed. To avoid every caller having to do the virtual-physical conversion, add a new function sie64a() which converts the virtual address to physical. Signed-off-by: Nico Boehr <nrb@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20221020143159.294605-3-nrb@linux.ibm.com Message-Id: <20221020143159.294605-3-nrb@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-10-20 14:31:56 +00:00
* __sie64a calling convention:
* %r2 pointer to sie control block phys
* %r3 pointer to sie control block virt
* %r4 guest register save area
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
*/
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_FUNC_START(__sie64a)
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
stmg %r6,%r14,__SF_GPRS(%r15) # save kernel registers
s390: run user space and KVM guests with modified branch prediction Define TIF_ISOLATE_BP and TIF_ISOLATE_BP_GUEST and add the necessary plumbing in entry.S to be able to run user space and KVM guests with limited branch prediction. To switch a user space process to limited branch prediction the s390_isolate_bp() function has to be call, and to run a vCPU of a KVM guest associated with the current task with limited branch prediction call s390_isolate_bp_guest(). Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:36:46 +00:00
lg %r12,__LC_CURRENT
s390/entry: sort out physical vs virtual pointers usage in sie64a Fix virtual vs physical address confusion (which currently are the same). sie_block is accessed in entry.S and passed it to hardware, which is why both its physical and virtual address are needed. To avoid every caller having to do the virtual-physical conversion, add a new function sie64a() which converts the virtual address to physical. Signed-off-by: Nico Boehr <nrb@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20221020143159.294605-3-nrb@linux.ibm.com Message-Id: <20221020143159.294605-3-nrb@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-10-20 14:31:56 +00:00
stg %r2,__SF_SIE_CONTROL_PHYS(%r15) # save sie block physical..
stg %r3,__SF_SIE_CONTROL(%r15) # ...and virtual addresses
stg %r4,__SF_SIE_SAVEAREA(%r15) # save guest register save area
s390/kvm: improve stack frame constants in entry.S The code in sie64a uses the stack frame passed to the function to store some temporary data in the empty1 array (see struct stack_frame in asm/processor.h. Replace the __SF_EMPTY+x constants with a properly defined offset: s/__SF_EMPTY/__SF_SIE_CONTROL/, s/__SF_EMPTY+8/__SF_SIE_SAVEAREA/, s/__SF_EMPTY+16/__SF_SIE_REASON/, s/__SF_EMPTY+24/__SF_SIE_FLAGS/. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-20 12:33:43 +00:00
xc __SF_SIE_REASON(8,%r15),__SF_SIE_REASON(%r15) # reason code = 0
mvc __SF_SIE_FLAGS(8,%r15),__TI_flags(%r12) # copy thread flags
s390/entry: sort out physical vs virtual pointers usage in sie64a Fix virtual vs physical address confusion (which currently are the same). sie_block is accessed in entry.S and passed it to hardware, which is why both its physical and virtual address are needed. To avoid every caller having to do the virtual-physical conversion, add a new function sie64a() which converts the virtual address to physical. Signed-off-by: Nico Boehr <nrb@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20221020143159.294605-3-nrb@linux.ibm.com Message-Id: <20221020143159.294605-3-nrb@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-10-20 14:31:56 +00:00
lmg %r0,%r13,0(%r4) # load guest gprs 0-13
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
lg %r14,__LC_GMAP # get gmap pointer
ltgr %r14,%r14
jz .Lsie_gmap
s390/entry: add CIF_SIE flag and remove sie64a() address check When a program check, interrupt or machine check is triggered, the PSW address is compared to a certain range of the sie64a() function to figure out whether SIE was interrupted and a cleanup of SIE is needed. This doesn't work with kprobes: If kprobes probes an instruction, it copies the instruction to the kprobes instruction page and overwrites the original instruction with an undefind instruction (Opcode 00). When this instruction is hit later, kprobes single-steps the instruction on the kprobes_instruction page. However, if this instruction is a relative branch instruction it will now point to a different location in memory due to being moved to the kprobes instruction page. If the new branch target points into sie64a() the kernel assumes it interrupted SIE when processing the breakpoint and will crash trying to access the SIE control block. Instead of comparing the address, introduce a new CIF_SIE flag which indicates whether SIE was interrupted. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-20 13:21:14 +00:00
oi __LC_CPU_FLAGS+7,_CIF_SIE
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
lctlg %c1,%c1,__GMAP_ASCE(%r14) # load primary asce
.Lsie_gmap:
s390/kvm: improve stack frame constants in entry.S The code in sie64a uses the stack frame passed to the function to store some temporary data in the empty1 array (see struct stack_frame in asm/processor.h. Replace the __SF_EMPTY+x constants with a properly defined offset: s/__SF_EMPTY/__SF_SIE_CONTROL/, s/__SF_EMPTY+8/__SF_SIE_SAVEAREA/, s/__SF_EMPTY+16/__SF_SIE_REASON/, s/__SF_EMPTY+24/__SF_SIE_FLAGS/. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-20 12:33:43 +00:00
lg %r14,__SF_SIE_CONTROL(%r15) # get control block pointer
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
oi __SIE_PROG0C+3(%r14),1 # we are going into SIE now
tm __SIE_PROG20+3(%r14),3 # last exit...
jnz .Lsie_skip
s390/entry: sort out physical vs virtual pointers usage in sie64a Fix virtual vs physical address confusion (which currently are the same). sie_block is accessed in entry.S and passed it to hardware, which is why both its physical and virtual address are needed. To avoid every caller having to do the virtual-physical conversion, add a new function sie64a() which converts the virtual address to physical. Signed-off-by: Nico Boehr <nrb@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20221020143159.294605-3-nrb@linux.ibm.com Message-Id: <20221020143159.294605-3-nrb@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-10-20 14:31:56 +00:00
lg %r14,__SF_SIE_CONTROL_PHYS(%r15) # get sie block phys addr
s390/bp: remove TIF_ISOLATE_BP TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b00 ("s390: run user space and KVM guests with modified branch prediction"). Given that there is no use case remove it again. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-02-28 12:57:48 +00:00
BPEXIT __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST
s390/nmi: s390: New low level handling for machine check happening in guest Add the logic to check if the machine check happens when the guest is running. If yes, set the exit reason -EINTR in the machine check's interrupt handler. Refactor s390_do_machine_check to avoid panicing the host for some kinds of machine checks which happen when guest is running. Reinject the instruction processing damage's machine checks including Delayed Access Exception instead of damaging the host if it happens in the guest because it could be caused by improper update on TLB entry or other software case and impacts the guest only. Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-06-07 09:30:42 +00:00
.Lsie_entry:
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
sie 0(%r14)
s390/mcck: isolate SIE instruction when setting CIF_MCCK_GUEST flag Commit d768bd892fc8 ("s390: add options to change branch prediction behaviour for the kernel") introduced .Lsie_exit label - supposedly to fence off SIE instruction. However, the corresponding address range length .Lsie_crit_mcck_length was not updated, which led to BPON code potentionally marked with CIF_MCCK_GUEST flag. Both .Lsie_exit and .Lsie_crit_mcck_length were removed with commit 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S"), but the issue persisted - currently BPOFF and BPENTER macros might get wrongly considered by the machine check handler as a guest. Fixes: d768bd892fc8 ("s390: add options to change branch prediction behaviour for the kernel") Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-23 10:38:14 +00:00
# Let the next instruction be NOP to avoid triggering a machine check
# and handling it in a guest as result of the instruction execution.
nopr 7
.Lsie_leave:
s390: add options to change branch prediction behaviour for the kernel Add the PPA instruction to the system entry and exit path to switch the kernel to a different branch prediction behaviour. The instructions are added via CPU alternatives and can be disabled with the "nospec" or the "nobp=0" kernel parameter. If the default behaviour selected with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be used to enable the changed kernel branch prediction. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:11:45 +00:00
BPOFF
s390/bp: remove TIF_ISOLATE_BP TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b00 ("s390: run user space and KVM guests with modified branch prediction"). Given that there is no use case remove it again. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-02-28 12:57:48 +00:00
BPENTER __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
.Lsie_skip:
s390/entry: sort out physical vs virtual pointers usage in sie64a Fix virtual vs physical address confusion (which currently are the same). sie_block is accessed in entry.S and passed it to hardware, which is why both its physical and virtual address are needed. To avoid every caller having to do the virtual-physical conversion, add a new function sie64a() which converts the virtual address to physical. Signed-off-by: Nico Boehr <nrb@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20221020143159.294605-3-nrb@linux.ibm.com Message-Id: <20221020143159.294605-3-nrb@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-10-20 14:31:56 +00:00
lg %r14,__SF_SIE_CONTROL(%r15) # get control block pointer
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
ni __SIE_PROG0C+3(%r14),0xfe # no longer in SIE
s390/mm: remove set_fs / rework address space handling Remove set_fs support from s390. With doing this rework address space handling and simplify it. As a result address spaces are now setup like this: CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE ----------------------------|-----------|-----------|----------- user space | user | user | kernel kernel, normal execution | kernel | user | kernel kernel, kvm guest execution | gmap | user | kernel To achieve this the getcpu vdso syscall is removed in order to avoid secondary address mode and a separate vdso address space in for user space. The getcpu vdso syscall will be implemented differently with a subsequent patch. The kernel accesses user space always via secondary address space. This happens in different ways: - with mvcos in home space mode and directly read/write to secondary address space - with mvcs/mvcp in primary space mode and copy from primary space to secondary space or vice versa - with e.g. cs in secondary space mode and access secondary space Switching translation modes happens with sacf before and after instructions which access user space, like before. Lazy handling of control register reloading is removed in the hope to make everything simpler, but at the cost of making kernel entry and exit a bit slower. That is: on kernel entry the primary asce is always changed to contain the kernel asce, and on kernel exit the primary asce is changed again so it contains the user asce. In kernel mode there is only one exception to the primary asce: when kvm guests are executed the primary asce contains the gmap asce (which describes the guest address space). The primary asce is reset to kernel asce whenever kvm guest execution is interrupted, so that this doesn't has to be taken into account for any user space accesses. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-16 07:06:40 +00:00
lctlg %c1,%c1,__LC_KERNEL_ASCE # load primary asce
s390/entry: add CIF_SIE flag and remove sie64a() address check When a program check, interrupt or machine check is triggered, the PSW address is compared to a certain range of the sie64a() function to figure out whether SIE was interrupted and a cleanup of SIE is needed. This doesn't work with kprobes: If kprobes probes an instruction, it copies the instruction to the kprobes instruction page and overwrites the original instruction with an undefind instruction (Opcode 00). When this instruction is hit later, kprobes single-steps the instruction on the kprobes_instruction page. However, if this instruction is a relative branch instruction it will now point to a different location in memory due to being moved to the kprobes instruction page. If the new branch target points into sie64a() the kernel assumes it interrupted SIE when processing the breakpoint and will crash trying to access the SIE control block. Instead of comparing the address, introduce a new CIF_SIE flag which indicates whether SIE was interrupted. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-20 13:21:14 +00:00
ni __LC_CPU_FLAGS+7,255-_CIF_SIE
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
# some program checks are suppressing. C code (e.g. do_protection_exception)
s390/kvm: do not rely on the ILC on kvm host protection fauls For most cases a protection exception in the host (e.g. copy on write or dirty tracking) on the sie instruction will indicate an instruction length of 4. Turns out that there are some corner cases (e.g. runtime instrumentation) where this is not necessarily true and the ILC is unpredictable. Let's replace our 4 byte rewind_pad with 3 byte nops to prepare for all possible ILCs. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-05-15 12:11:03 +00:00
# will rewind the PSW by the ILC, which is often 4 bytes in case of SIE. There
# are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable.
s390/entry: sort out physical vs virtual pointers usage in sie64a Fix virtual vs physical address confusion (which currently are the same). sie_block is accessed in entry.S and passed it to hardware, which is why both its physical and virtual address are needed. To avoid every caller having to do the virtual-physical conversion, add a new function sie64a() which converts the virtual address to physical. Signed-off-by: Nico Boehr <nrb@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20221020143159.294605-3-nrb@linux.ibm.com Message-Id: <20221020143159.294605-3-nrb@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-10-20 14:31:56 +00:00
# Other instructions between __sie64a and .Lsie_done should not cause program
s390/kvm: do not rely on the ILC on kvm host protection fauls For most cases a protection exception in the host (e.g. copy on write or dirty tracking) on the sie instruction will indicate an instruction length of 4. Turns out that there are some corner cases (e.g. runtime instrumentation) where this is not necessarily true and the ILC is unpredictable. Let's replace our 4 byte rewind_pad with 3 byte nops to prepare for all possible ILCs. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-05-15 12:11:03 +00:00
# interrupts. So lets use 3 nops as a landing pad for all possible rewinds.
.Lrewind_pad6:
nopr 7
.Lrewind_pad4:
nopr 7
.Lrewind_pad2:
nopr 7
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_INNER_LABEL(sie_exit, SYM_L_GLOBAL)
s390/kvm: improve stack frame constants in entry.S The code in sie64a uses the stack frame passed to the function to store some temporary data in the empty1 array (see struct stack_frame in asm/processor.h. Replace the __SF_EMPTY+x constants with a properly defined offset: s/__SF_EMPTY/__SF_SIE_CONTROL/, s/__SF_EMPTY+8/__SF_SIE_SAVEAREA/, s/__SF_EMPTY+16/__SF_SIE_REASON/, s/__SF_EMPTY+24/__SF_SIE_FLAGS/. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-20 12:33:43 +00:00
lg %r14,__SF_SIE_SAVEAREA(%r15) # load guest register save area
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
stmg %r0,%r13,0(%r14) # save guest gprs 0-13
s390: scrub registers on kernel entry and KVM exit Clear all user space registers on entry to the kernel and all KVM guest registers on KVM guest exit if the register does not contain either a parameter or a result value. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 12:27:30 +00:00
xgr %r0,%r0 # clear guest registers to
xgr %r1,%r1 # prevent speculative use
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
lmg %r6,%r14,__SF_GPRS(%r15) # restore kernel registers
s390/kvm: improve stack frame constants in entry.S The code in sie64a uses the stack frame passed to the function to store some temporary data in the empty1 array (see struct stack_frame in asm/processor.h. Replace the __SF_EMPTY+x constants with a properly defined offset: s/__SF_EMPTY/__SF_SIE_CONTROL/, s/__SF_EMPTY+8/__SF_SIE_SAVEAREA/, s/__SF_EMPTY+16/__SF_SIE_REASON/, s/__SF_EMPTY+24/__SF_SIE_FLAGS/. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-20 12:33:43 +00:00
lg %r2,__SF_SIE_REASON(%r15) # return exit reason code
s390: move expoline assembler macros to a header To be able to use the expoline branches in different assembler files move the associated macros from entry.S to a new header nospec-insn.h. While we are at it make the macros a bit nicer to use. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-20 14:49:46 +00:00
BR_EX %r14
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
.Lsie_fault:
lghi %r14,-EFAULT
s390/kvm: improve stack frame constants in entry.S The code in sie64a uses the stack frame passed to the function to store some temporary data in the empty1 array (see struct stack_frame in asm/processor.h. Replace the __SF_EMPTY+x constants with a properly defined offset: s/__SF_EMPTY/__SF_SIE_CONTROL/, s/__SF_EMPTY+8/__SF_SIE_SAVEAREA/, s/__SF_EMPTY+16/__SF_SIE_REASON/, s/__SF_EMPTY+24/__SF_SIE_FLAGS/. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-20 12:33:43 +00:00
stg %r14,__SF_SIE_REASON(%r15) # set exit reason code
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
j sie_exit
s390/kvm: do not rely on the ILC on kvm host protection fauls For most cases a protection exception in the host (e.g. copy on write or dirty tracking) on the sie instruction will indicate an instruction length of 4. Turns out that there are some corner cases (e.g. runtime instrumentation) where this is not necessarily true and the ILC is unpredictable. Let's replace our 4 byte rewind_pad with 3 byte nops to prepare for all possible ILCs. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-05-15 12:11:03 +00:00
EX_TABLE(.Lrewind_pad6,.Lsie_fault)
EX_TABLE(.Lrewind_pad4,.Lsie_fault)
EX_TABLE(.Lrewind_pad2,.Lsie_fault)
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
EX_TABLE(sie_exit,.Lsie_fault)
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_FUNC_END(__sie64a)
s390/entry: sort out physical vs virtual pointers usage in sie64a Fix virtual vs physical address confusion (which currently are the same). sie_block is accessed in entry.S and passed it to hardware, which is why both its physical and virtual address are needed. To avoid every caller having to do the virtual-physical conversion, add a new function sie64a() which converts the virtual address to physical. Signed-off-by: Nico Boehr <nrb@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20221020143159.294605-3-nrb@linux.ibm.com Message-Id: <20221020143159.294605-3-nrb@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-10-20 14:31:56 +00:00
EXPORT_SYMBOL(__sie64a)
s390: move exports to definitions Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-12 18:30:03 +00:00
EXPORT_SYMBOL(sie_exit)
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 15:26:40 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* SVC interrupt handler routine. System calls are synchronous events and
s390: fix comment regarding interrupts in svc With the removal of the critical section cleanup, we now enter the svc interrupt handler with interrupts disabled. Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S") Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-07 12:07:53 +00:00
* are entered with interrupts disabled.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_START(system_call)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
stpt __LC_SYS_ENTER_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
stmg %r8,%r15,__LC_SAVE_AREA_SYNC
s390: add options to change branch prediction behaviour for the kernel Add the PPA instruction to the system entry and exit path to switch the kernel to a different branch prediction behaviour. The instructions are added via CPU alternatives and can be disabled with the "nospec" or the "nobp=0" kernel parameter. If the default behaviour selected with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be used to enable the changed kernel branch prediction. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:11:45 +00:00
BPOFF
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
lghi %r14,0
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 16:00:08 +00:00
.Lsysc_per:
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
STBEAR __LC_LAST_BREAK
s390/mm: remove set_fs / rework address space handling Remove set_fs support from s390. With doing this rework address space handling and simplify it. As a result address spaces are now setup like this: CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE ----------------------------|-----------|-----------|----------- user space | user | user | kernel kernel, normal execution | kernel | user | kernel kernel, kvm guest execution | gmap | user | kernel To achieve this the getcpu vdso syscall is removed in order to avoid secondary address mode and a separate vdso address space in for user space. The getcpu vdso syscall will be implemented differently with a subsequent patch. The kernel accesses user space always via secondary address space. This happens in different ways: - with mvcos in home space mode and directly read/write to secondary address space - with mvcs/mvcp in primary space mode and copy from primary space to secondary space or vice versa - with e.g. cs in secondary space mode and access secondary space Switching translation modes happens with sacf before and after instructions which access user space, like before. Lazy handling of control register reloading is removed in the hope to make everything simpler, but at the cost of making kernel entry and exit a bit slower. That is: on kernel entry the primary asce is always changed to contain the kernel asce, and on kernel exit the primary asce is changed again so it contains the user asce. In kernel mode there is only one exception to the primary asce: when kvm guests are executed the primary asce contains the gmap asce (which describes the guest address space). The primary asce is reset to kernel asce whenever kvm guest execution is interrupted, so that this doesn't has to be taken into account for any user space accesses. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-16 07:06:40 +00:00
lctlg %c1,%c1,__LC_KERNEL_ASCE
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
lg %r15,__LC_KERNEL_STACK
s390: always clear kernel stack backchain before calling functions Clear the kernel stack backchain before potentially calling the lockdep trace_hardirqs_off/on functions. Without this walking the kernel backchain, e.g. during a panic, might stop too early. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-04 16:56:57 +00:00
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
stmg %r0,%r7,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
s390/entry.S: fix spurious zeroing of r0 when a system call is interrupted we might call the critical section cleanup handler that re-does some of the operations. When we are between .Lsysc_vtime and .Lsysc_do_svc we might also redo the saving of the problem state registers r0-r7: .Lcleanup_system_call: [...] 0: # update accounting time stamp mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER # set up saved register r11 lg %r15,__LC_KERNEL_STACK la %r9,STACK_FRAME_OVERHEAD(%r15) stg %r9,24(%r11) # r11 pt_regs pointer # fill pt_regs mvc __PT_R8(64,%r9),__LC_SAVE_AREA_SYNC ---> stmg %r0,%r7,__PT_R0(%r9) The problem is now, that we might have already zeroed out r0. The fix is to move the zeroing of r0 after sysc_do_svc. Reported-by: Farhan Ali <alifm@linux.vnet.ibm.com> Fixes: 7041d28115e91 ("s390: scrub registers on kernel entry and KVM exit") Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-05 19:18:47 +00:00
# clear user controlled register to prevent speculative use
xgr %r0,%r0
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
xgr %r1,%r1
xgr %r4,%r4
xgr %r5,%r5
xgr %r6,%r6
xgr %r7,%r7
xgr %r8,%r8
xgr %r9,%r9
xgr %r10,%r10
xgr %r11,%r11
la %r2,STACK_FRAME_OVERHEAD(%r15) # pointer to pt_regs
s390/entry: use assignment to read intcode / asm to copy gprs arch/s390/kernel/syscall.c: In function __do_syscall: arch/s390/kernel/syscall.c:147:9: warning: memcpy reading 64 bytes from a region of size 0 [-Wstringop-overread] 147 | memcpy(&regs->gprs[8], S390_lowcore.save_area_sync, 8 * sizeof(unsigned long)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/s390/kernel/syscall.c:148:9: warning: memcpy reading 4 bytes from a region of size 0 [-Wstringop-overread] 148 | memcpy(&regs->int_code, &S390_lowcore.svc_ilc, sizeof(regs->int_code)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by moving the gprs restore from C to assembly, and use a assignment for int_code instead of memcpy. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-05-05 20:01:09 +00:00
mvc __PT_R8(64,%r2),__LC_SAVE_AREA_SYNC
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
MBEAR %r2
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
lgr %r3,%r14
brasl %r14,__do_syscall
s390: enable HAVE_ARCH_STACKLEAK Add support for the stackleak feature. Whenever the kernel returns to user space the kernel stack is filled with a poison value. Enabling this feature is quite expensive: e.g. after instrumenting the getpid() system call function to have a 4kb stack the result is an increased runtime of the system call by a factor of 3. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27 09:37:28 +00:00
STACKLEAK_ERASE
s390/mm: remove set_fs / rework address space handling Remove set_fs support from s390. With doing this rework address space handling and simplify it. As a result address spaces are now setup like this: CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE ----------------------------|-----------|-----------|----------- user space | user | user | kernel kernel, normal execution | kernel | user | kernel kernel, kvm guest execution | gmap | user | kernel To achieve this the getcpu vdso syscall is removed in order to avoid secondary address mode and a separate vdso address space in for user space. The getcpu vdso syscall will be implemented differently with a subsequent patch. The kernel accesses user space always via secondary address space. This happens in different ways: - with mvcos in home space mode and directly read/write to secondary address space - with mvcs/mvcp in primary space mode and copy from primary space to secondary space or vice versa - with e.g. cs in secondary space mode and access secondary space Switching translation modes happens with sacf before and after instructions which access user space, like before. Lazy handling of control register reloading is removed in the hope to make everything simpler, but at the cost of making kernel entry and exit a bit slower. That is: on kernel entry the primary asce is always changed to contain the kernel asce, and on kernel exit the primary asce is changed again so it contains the user asce. In kernel mode there is only one exception to the primary asce: when kvm guests are executed the primary asce contains the gmap asce (which describes the guest address space). The primary asce is reset to kernel asce whenever kvm guest execution is interrupted, so that this doesn't has to be taken into account for any user space accesses. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-16 07:06:40 +00:00
lctlg %c1,%c1,__LC_USER_ASCE
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
mvc __LC_RETURN_PSW(16),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
s390/bp: remove TIF_ISOLATE_BP TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b00 ("s390: run user space and KVM guests with modified branch prediction"). Given that there is no use case remove it again. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-02-28 12:57:48 +00:00
BPON
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
LBEAR STACK_FRAME_OVERHEAD+__PT_LAST_BREAK(%r15)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
stpt __LC_EXIT_TIMER
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_END(system_call)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# a new process exits the kernel with ret_from_fork
#
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_START(ret_from_fork)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
lgr %r3,%r11
brasl %r14,__ret_from_fork
s390: enable HAVE_ARCH_STACKLEAK Add support for the stackleak feature. Whenever the kernel returns to user space the kernel stack is filled with a poison value. Enabling this feature is quite expensive: e.g. after instrumenting the getpid() system call function to have a 4kb stack the result is an increased runtime of the system call by a factor of 3. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27 09:37:28 +00:00
STACKLEAK_ERASE
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
lctlg %c1,%c1,__LC_USER_ASCE
mvc __LC_RETURN_PSW(16),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
s390/bp: remove TIF_ISOLATE_BP TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b00 ("s390: run user space and KVM guests with modified branch prediction"). Given that there is no use case remove it again. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-02-28 12:57:48 +00:00
BPON
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
LBEAR STACK_FRAME_OVERHEAD+__PT_LAST_BREAK(%r15)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
stpt __LC_EXIT_TIMER
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_END(ret_from_fork)
s390: add missing ENDPROC statements to assembler functions The assembler code in arch/s390 misses proper ENDPROC statements to properly end functions in a few places. Add them. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-17 09:02:22 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Program check handler routine
*/
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_START(pgm_check_handler)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
stpt __LC_SYS_ENTER_TIMER
s390: add options to change branch prediction behaviour for the kernel Add the PPA instruction to the system entry and exit path to switch the kernel to a different branch prediction behaviour. The instructions are added via CPU alternatives and can be disabled with the "nospec" or the "nobp=0" kernel parameter. If the default behaviour selected with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be used to enable the changed kernel branch prediction. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:11:45 +00:00
BPOFF
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
stmg %r8,%r15,__LC_SAVE_AREA_SYNC
s390/entry: compare gmap asce to determine guest/host fault With the current implementation, there are some cornercases where a host fault would be treated as a guest fault, for example when the sie instruction causes a program check. Therefore store the gmap asce in ptregs, and use that to compare the primary asce from the fault instead of matching instruction addresses. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-03-13 08:51:22 +00:00
lgr %r10,%r15
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
lmg %r8,%r9,__LC_PGM_OLD_PSW
s390/mm: remove set_fs / rework address space handling Remove set_fs support from s390. With doing this rework address space handling and simplify it. As a result address spaces are now setup like this: CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE ----------------------------|-----------|-----------|----------- user space | user | user | kernel kernel, normal execution | kernel | user | kernel kernel, kvm guest execution | gmap | user | kernel To achieve this the getcpu vdso syscall is removed in order to avoid secondary address mode and a separate vdso address space in for user space. The getcpu vdso syscall will be implemented differently with a subsequent patch. The kernel accesses user space always via secondary address space. This happens in different ways: - with mvcos in home space mode and directly read/write to secondary address space - with mvcs/mvcp in primary space mode and copy from primary space to secondary space or vice versa - with e.g. cs in secondary space mode and access secondary space Switching translation modes happens with sacf before and after instructions which access user space, like before. Lazy handling of control register reloading is removed in the hope to make everything simpler, but at the cost of making kernel entry and exit a bit slower. That is: on kernel entry the primary asce is always changed to contain the kernel asce, and on kernel exit the primary asce is changed again so it contains the user asce. In kernel mode there is only one exception to the primary asce: when kvm guests are executed the primary asce contains the gmap asce (which describes the guest address space). The primary asce is reset to kernel asce whenever kvm guest execution is interrupted, so that this doesn't has to be taken into account for any user space accesses. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-16 07:06:40 +00:00
tmhh %r8,0x0001 # coming from user space?
jno .Lpgm_skip_asce
lctlg %c1,%c1,__LC_KERNEL_ASCE
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
j 3f # -> fault in user space
s390/mm: remove set_fs / rework address space handling Remove set_fs support from s390. With doing this rework address space handling and simplify it. As a result address spaces are now setup like this: CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE ----------------------------|-----------|-----------|----------- user space | user | user | kernel kernel, normal execution | kernel | user | kernel kernel, kvm guest execution | gmap | user | kernel To achieve this the getcpu vdso syscall is removed in order to avoid secondary address mode and a separate vdso address space in for user space. The getcpu vdso syscall will be implemented differently with a subsequent patch. The kernel accesses user space always via secondary address space. This happens in different ways: - with mvcos in home space mode and directly read/write to secondary address space - with mvcs/mvcp in primary space mode and copy from primary space to secondary space or vice versa - with e.g. cs in secondary space mode and access secondary space Switching translation modes happens with sacf before and after instructions which access user space, like before. Lazy handling of control register reloading is removed in the hope to make everything simpler, but at the cost of making kernel entry and exit a bit slower. That is: on kernel entry the primary asce is always changed to contain the kernel asce, and on kernel exit the primary asce is changed again so it contains the user asce. In kernel mode there is only one exception to the primary asce: when kvm guests are executed the primary asce contains the gmap asce (which describes the guest address space). The primary asce is reset to kernel asce whenever kvm guest execution is interrupted, so that this doesn't has to be taken into account for any user space accesses. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-16 07:06:40 +00:00
.Lpgm_skip_asce:
s390: prevent leaking kernel address in BEAR When userspace executes a syscall or gets interrupted, BEAR contains a kernel address when returning to userspace. This make it pretty easy to figure out where the kernel is mapped even with KASLR enabled. To fix this, add lpswe to lowcore and always execute it there, so userspace sees only the lowcore address of lpswe. For this we have to extend both critical_cleanup and the SWITCH_ASYNC macro to also check for lpswe addresses in lowcore. Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)") Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-22 12:38:22 +00:00
1: tmhh %r8,0x4000 # PER bit set in old PSW ?
jnz 2f # -> enabled, can't be a double fault
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
tm __LC_PGM_ILC+3,0x80 # check for per exception
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 16:00:08 +00:00
jnz .Lpgm_svcper # -> single stepped svc
s390: prevent leaking kernel address in BEAR When userspace executes a syscall or gets interrupted, BEAR contains a kernel address when returning to userspace. This make it pretty easy to figure out where the kernel is mapped even with KASLR enabled. To fix this, add lpswe to lowcore and always execute it there, so userspace sees only the lowcore address of lpswe. For this we have to extend both critical_cleanup and the SWITCH_ASYNC macro to also check for lpswe addresses in lowcore. Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)") Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-22 12:38:22 +00:00
2: CHECK_STACK __LC_SAVE_AREA_SYNC
s390: lowcore stack pointer offsets Store the stack pointers in the lowcore for the kernel stack, the async stack and the panic stack with the offset required for the first user. This avoids an unnecessary add instruction on the system call path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-24 08:20:43 +00:00
aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
# CHECK_VMAP_STACK branches to stack_overflow or 4f
CHECK_VMAP_STACK __LC_SAVE_AREA_SYNC,4f
s390/bp: remove TIF_ISOLATE_BP TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b00 ("s390: run user space and KVM guests with modified branch prediction"). Given that there is no use case remove it again. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-02-28 12:57:48 +00:00
3: lg %r15,__LC_KERNEL_STACK
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
4: la %r11,STACK_FRAME_OVERHEAD(%r15)
s390/entry: compare gmap asce to determine guest/host fault With the current implementation, there are some cornercases where a host fault would be treated as a guest fault, for example when the sie instruction causes a program check. Therefore store the gmap asce in ptregs, and use that to compare the primary asce from the fault instead of matching instruction addresses. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-03-13 08:51:22 +00:00
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
stmg %r0,%r7,__PT_R0(%r11)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
mvc __PT_LAST_BREAK(8,%r11),__LC_PGM_LAST_BREAK
s390/entry: compare gmap asce to determine guest/host fault With the current implementation, there are some cornercases where a host fault would be treated as a guest fault, for example when the sie instruction causes a program check. Therefore store the gmap asce in ptregs, and use that to compare the primary asce from the fault instead of matching instruction addresses. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-03-13 08:51:22 +00:00
stctg %c1,%c1,__PT_CR1(%r11)
#if IS_ENABLED(CONFIG_KVM)
lg %r12,__LC_GMAP
clc __GMAP_ASCE(8,%r12), __PT_CR1(%r11)
jne 5f
BPENTER __SF_SIE_FLAGS(%r10),_TIF_ISOLATE_BP_GUEST
SIEEXIT __SF_SIE_CONTROL(%r10)
#endif
5: stmg %r8,%r9,__PT_PSW(%r11)
s390: scrub registers on kernel entry and KVM exit Clear all user space registers on entry to the kernel and all KVM guest registers on KVM guest exit if the register does not contain either a parameter or a result value. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 12:27:30 +00:00
# clear user controlled registers to prevent speculative use
xgr %r0,%r0
xgr %r1,%r1
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
xgr %r6,%r6
xgr %r7,%r7
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
lgr %r2,%r11
brasl %r14,__do_pgm_check
tmhh %r8,0x0001 # returning to user space?
jno .Lpgm_exit_kernel
s390: enable HAVE_ARCH_STACKLEAK Add support for the stackleak feature. Whenever the kernel returns to user space the kernel stack is filled with a poison value. Enabling this feature is quite expensive: e.g. after instrumenting the getpid() system call function to have a 4kb stack the result is an increased runtime of the system call by a factor of 3. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27 09:37:28 +00:00
STACKLEAK_ERASE
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
lctlg %c1,%c1,__LC_USER_ASCE
s390/bp: remove TIF_ISOLATE_BP TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b00 ("s390: run user space and KVM guests with modified branch prediction"). Given that there is no use case remove it again. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-02-28 12:57:48 +00:00
BPON
s390: add separate program check exit path System call and program check handler both use the system call exit path when returning to previous context. However the program check handler jumps right to the end of the system call exit path if the previous context is kernel context. This lead to the quite odd double disabling of interrupts in the system call exit path introduced with commit ce9dfafe29be ("s390: fix system call exit path"). To avoid that have a separate program check handler exit path if the previous context is kernel context. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-11 17:46:26 +00:00
stpt __LC_EXIT_TIMER
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
.Lpgm_exit_kernel:
mvc __LC_RETURN_PSW(16),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
LBEAR STACK_FRAME_OVERHEAD+__PT_LAST_BREAK(%r15)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[S390] add kprobes support. Signed-off-by: Michael Grundy <grundym@us.ibm.com> Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 13:58:39 +00:00
#
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
# single stepped system call
[S390] add kprobes support. Signed-off-by: Michael Grundy <grundym@us.ibm.com> Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 13:58:39 +00:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 16:00:08 +00:00
.Lpgm_svcper:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
mvc __LC_RETURN_PSW(8),__LC_SVC_NEW_PSW
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 16:00:08 +00:00
larl %r14,.Lsysc_per
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
stg %r14,__LC_RETURN_PSW+8
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
lghi %r14,1
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
LBEAR __LC_PGM_LAST_BREAK
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE # branch to .Lsysc_per
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_END(pgm_check_handler)
[S390] add kprobes support. Signed-off-by: Michael Grundy <grundym@us.ibm.com> Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 13:58:39 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
* Interrupt handler macro used for external and IO interrupts.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
.macro INT_HANDLER name,lc_old_psw,handler
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_START(\name)
s390: assume stckf is always present With z10 as minimum supported machine generation the store-clock-fast facility (25) is always present and checked in als code. Drop alternatives and always use stckf. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-25 09:38:23 +00:00
stckf __LC_INT_CLOCK
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
stpt __LC_SYS_ENTER_TIMER
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
STBEAR __LC_LAST_BREAK
s390: add options to change branch prediction behaviour for the kernel Add the PPA instruction to the system entry and exit path to switch the kernel to a different branch prediction behaviour. The instructions are added via CPU alternatives and can be disabled with the "nospec" or the "nobp=0" kernel parameter. If the default behaviour selected with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be used to enable the changed kernel branch prediction. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:11:45 +00:00
BPOFF
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
stmg %r8,%r15,__LC_SAVE_AREA_ASYNC
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
lmg %r8,%r9,\lc_old_psw
s390: open code SWITCH_KERNEL macro This is a preparation patch for two later bugfixes. In the past both int_handler and machine check handler used SWITCH_KERNEL to switch to the kernel stack. However, SWITCH_KERNEL doesn't work properly in machine check context. So instead of adding more complexity to this macro, just remove it. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Cc: <stable@kernel.org> # v5.8+ Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-01-28 12:06:05 +00:00
tmhh %r8,0x0001 # interrupting from user ?
jnz 1f
#if IS_ENABLED(CONFIG_KVM)
s390/entry: add CIF_SIE flag and remove sie64a() address check When a program check, interrupt or machine check is triggered, the PSW address is compared to a certain range of the sie64a() function to figure out whether SIE was interrupted and a cleanup of SIE is needed. This doesn't work with kprobes: If kprobes probes an instruction, it copies the instruction to the kprobes instruction page and overwrites the original instruction with an undefind instruction (Opcode 00). When this instruction is hit later, kprobes single-steps the instruction on the kprobes_instruction page. However, if this instruction is a relative branch instruction it will now point to a different location in memory due to being moved to the kprobes instruction page. If the new branch target points into sie64a() the kernel assumes it interrupted SIE when processing the breakpoint and will crash trying to access the SIE control block. Instead of comparing the address, introduce a new CIF_SIE flag which indicates whether SIE was interrupted. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-20 13:21:14 +00:00
TSTMSK __LC_CPU_FLAGS,_CIF_SIE
jz 0f
s390/bp: remove TIF_ISOLATE_BP TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b00 ("s390: run user space and KVM guests with modified branch prediction"). Given that there is no use case remove it again. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-02-28 12:57:48 +00:00
BPENTER __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST
s390/entry: compare gmap asce to determine guest/host fault With the current implementation, there are some cornercases where a host fault would be treated as a guest fault, for example when the sie instruction causes a program check. Therefore store the gmap asce in ptregs, and use that to compare the primary asce from the fault instead of matching instruction addresses. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-03-13 08:51:22 +00:00
SIEEXIT __SF_SIE_CONTROL(%r15)
s390: open code SWITCH_KERNEL macro This is a preparation patch for two later bugfixes. In the past both int_handler and machine check handler used SWITCH_KERNEL to switch to the kernel stack. However, SWITCH_KERNEL doesn't work properly in machine check context. So instead of adding more complexity to this macro, just remove it. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Cc: <stable@kernel.org> # v5.8+ Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-01-28 12:06:05 +00:00
#endif
0: CHECK_STACK __LC_SAVE_AREA_ASYNC
aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
j 2f
s390/bp: remove TIF_ISOLATE_BP TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b00 ("s390: run user space and KVM guests with modified branch prediction"). Given that there is no use case remove it again. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-02-28 12:57:48 +00:00
1: lctlg %c1,%c1,__LC_KERNEL_ASCE
s390: open code SWITCH_KERNEL macro This is a preparation patch for two later bugfixes. In the past both int_handler and machine check handler used SWITCH_KERNEL to switch to the kernel stack. However, SWITCH_KERNEL doesn't work properly in machine check context. So instead of adding more complexity to this macro, just remove it. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Cc: <stable@kernel.org> # v5.8+ Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-01-28 12:06:05 +00:00
lg %r15,__LC_KERNEL_STACK
s390/entry: avoid setting up backchain in ext|io handlers Currently when interrupt arrives to cpu while in kernel context INT_HANDLER macro (used for ext_int_handler and io_int_handler) allocates new stack frame and pt_regs on the kernel stack and sets up the backchain to jump over the pt_regs to the frame which has been interrupted. This is not ideal to two reasons: 1. This hides the fact that kernel stack contains interrupt frame in it and hence breaks arch_stack_walk_reliable(), which needs to know that to guarantee "reliability" and checks that there are no pt_regs on the way. 2. It breaks the backchain unwinder logic, which assumes that the next stack frame after an interrupt frame is reliable, while it is not. In some cases (when r14 contains garbage) this leads to early unwinding termination with an error, instead of marking frame as unreliable and continuing. To address that, only set backchain to 0. Fixes: 56e62a737028 ("s390: convert to generic entry") Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-08 22:13:18 +00:00
2: xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
la %r11,STACK_FRAME_OVERHEAD(%r15)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
stmg %r0,%r7,__PT_R0(%r11)
s390: scrub registers on kernel entry and KVM exit Clear all user space registers on entry to the kernel and all KVM guest registers on KVM guest exit if the register does not contain either a parameter or a result value. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 12:27:30 +00:00
# clear user controlled registers to prevent speculative use
xgr %r0,%r0
xgr %r1,%r1
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
xgr %r6,%r6
xgr %r7,%r7
xgr %r10,%r10
s390: clear pt_regs::flags on irq entry The current irq entry code doesn't initialize pt_regs::flags. On exit to user mode arch_do_signal_or_restart() tests whether PIF_SYSCALL is set, which might yield wrong results. Fix this by clearing pt_regs::flags in the entry.S irq handler code. Reported-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Fixes: 56e62a737028 ("s390: convert to generic entry") Cc: <stable@vger.kernel.org> # 5.12 Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-11 14:08:18 +00:00
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
MBEAR %r11
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
stmg %r8,%r9,__PT_PSW(%r11)
s390/entry: remove broken and not needed code LLVM's integrated assembler reports the following error when compiling entry.S: <instantiation>:38:5: error: unknown token in expression tm %r8,0x0001 # coming from user space? The correct instruction would have been tmhh instead of tm. The current code is doing nothing, since (with gas) it get's translated to a tm instruction which reads from real address 8, which again contains always zero, and therefore the conditional code is never executed. Note that due to the missing displacement gas translates "%r8" into "8(%r0)". Also code inspection reveals that this conditional code is not needed. Therefore remove it. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-03 12:59:16 +00:00
lgr %r2,%r11 # pass pointer to pt_regs
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
brasl %r14,\handler
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
mvc __LC_RETURN_PSW(16),__PT_PSW(%r11)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
tmhh %r8,0x0001 # returning to user ?
jno 2f
s390: enable HAVE_ARCH_STACKLEAK Add support for the stackleak feature. Whenever the kernel returns to user space the kernel stack is filled with a poison value. Enabling this feature is quite expensive: e.g. after instrumenting the getpid() system call function to have a 4kb stack the result is an increased runtime of the system call by a factor of 3. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27 09:37:28 +00:00
STACKLEAK_ERASE
s390/mm: remove set_fs / rework address space handling Remove set_fs support from s390. With doing this rework address space handling and simplify it. As a result address spaces are now setup like this: CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE ----------------------------|-----------|-----------|----------- user space | user | user | kernel kernel, normal execution | kernel | user | kernel kernel, kvm guest execution | gmap | user | kernel To achieve this the getcpu vdso syscall is removed in order to avoid secondary address mode and a separate vdso address space in for user space. The getcpu vdso syscall will be implemented differently with a subsequent patch. The kernel accesses user space always via secondary address space. This happens in different ways: - with mvcos in home space mode and directly read/write to secondary address space - with mvcs/mvcp in primary space mode and copy from primary space to secondary space or vice versa - with e.g. cs in secondary space mode and access secondary space Switching translation modes happens with sacf before and after instructions which access user space, like before. Lazy handling of control register reloading is removed in the hope to make everything simpler, but at the cost of making kernel entry and exit a bit slower. That is: on kernel entry the primary asce is always changed to contain the kernel asce, and on kernel exit the primary asce is changed again so it contains the user asce. In kernel mode there is only one exception to the primary asce: when kvm guests are executed the primary asce contains the gmap asce (which describes the guest address space). The primary asce is reset to kernel asce whenever kvm guest execution is interrupted, so that this doesn't has to be taken into account for any user space accesses. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-16 07:06:40 +00:00
lctlg %c1,%c1,__LC_USER_ASCE
s390/bp: remove TIF_ISOLATE_BP TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b00 ("s390: run user space and KVM guests with modified branch prediction"). Given that there is no use case remove it again. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-02-28 12:57:48 +00:00
BPON
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
stpt __LC_EXIT_TIMER
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
2: LBEAR __PT_LAST_BREAK(%r11)
lmg %r0,%r15,__PT_R0(%r11)
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_END(\name)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
.endm
s390: add a system call for guarded storage This adds a new system call to enable the use of guarded storage for user space processes. The system call takes two arguments, a command and pointer to a guarded storage control block: s390_guarded_storage(int command, struct gs_cb *gs_cb); The second argument is relevant only for the GS_SET_BC_CB command. The commands in detail: 0 - GS_ENABLE Enable the guarded storage facility for the current task. The initial content of the guarded storage control block will be all zeros. After the enablement the user space code can use load-guarded-storage-controls instruction (LGSC) to load an arbitrary control block. While a task is enabled the kernel will save and restore the current content of the guarded storage registers on context switch. 1 - GS_DISABLE Disables the use of the guarded storage facility for the current task. The kernel will cease to save and restore the content of the guarded storage registers, the task specific content of these registers is lost. 2 - GS_SET_BC_CB Set a broadcast guarded storage control block. This is called per thread and stores a specific guarded storage control block in the task struct of the current task. This control block will be used for the broadcast event GS_BROADCAST. 3 - GS_CLEAR_BC_CB Clears the broadcast guarded storage control block. The guarded- storage control block is removed from the task struct that was established by GS_SET_BC_CB. 4 - GS_BROADCAST Sends a broadcast to all thread siblings of the current task. Every sibling that has established a broadcast guarded storage control block will load this control block and will be enabled for guarded storage. The broadcast guarded storage control block is used up, a second broadcast without a refresh of the stored control block with GS_SET_BC_CB will not have any effect. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26 13:10:34 +00:00
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
INT_HANDLER ext_int_handler,__LC_EXT_OLD_PSW,do_ext_irq
INT_HANDLER io_int_handler,__LC_IO_OLD_PSW,do_io_irq
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 15:59:27 +00:00
/*
s390: remove critical section cleanup from entry.S The current code is rather complex and caused a lot of subtle and hard to debug bugs in the past. Simplify the code by calling the system_call handler with interrupts disabled, save machine state, and re-enable them later. This requires significant changes to the machine check handling code as well. When the machine check interrupt arrived while being in kernel mode the new code will signal pending machine checks with a SIGP external call. When userspace was interrupted, the handler will switch to the kernel stack and directly execute s390_handle_mcck(). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-20 11:09:36 +00:00
* Load idle PSW.
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 15:59:27 +00:00
*/
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_FUNC_START(psw_idle)
s390/entry: save the caller of psw_idle Currently psw_idle does not allocate a stack frame and does not save its r14 and r15 into the save area. Even though this is valid from call ABI point of view, because psw_idle does not make any calls explicitly, in reality psw_idle is an entry point for controlled transition into serving interrupts. So, in practice, psw_idle stack frame is analyzed during stack unwinding. Depending on build options that r14 slot in the save area of psw_idle might either contain a value saved by previous sibling call or complete garbage. [task 0000038000003c28] do_ext_irq+0xd6/0x160 [task 0000038000003c78] ext_int_handler+0xba/0xe8 [task *0000038000003dd8] psw_idle_exit+0x0/0x8 <-- pt_regs ([task 0000038000003dd8] 0x0) [task 0000038000003e10] default_idle_call+0x42/0x148 [task 0000038000003e30] do_idle+0xce/0x160 [task 0000038000003e70] cpu_startup_entry+0x36/0x40 [task 0000038000003ea0] arch_call_rest_init+0x76/0x80 So, to make a stacktrace nicer and actually point for the real caller of psw_idle in this frequently occurring case, make psw_idle save its r14. [task 0000038000003c28] do_ext_irq+0xd6/0x160 [task 0000038000003c78] ext_int_handler+0xba/0xe8 [task *0000038000003dd8] psw_idle_exit+0x0/0x6 <-- pt_regs ([task 0000038000003dd8] arch_cpu_idle+0x3c/0xd0) [task 0000038000003e10] default_idle_call+0x42/0x148 [task 0000038000003e30] do_idle+0xce/0x160 [task 0000038000003e70] cpu_startup_entry+0x36/0x40 [task 0000038000003ea0] arch_call_rest_init+0x76/0x80 Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-08 22:15:21 +00:00
stg %r14,(__SF_GPRS+8*8)(%r15)
s390/vtimer: rework virtual timer interface The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20 09:15:08 +00:00
stg %r3,__SF_EMPTY(%r15)
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
larl %r1,psw_idle_exit
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 15:59:27 +00:00
stg %r1,__SF_EMPTY+8(%r15)
s390/vtime: correct scaled cputime of partially idle CPUs The calculation for the SMT scaling factor for a hardware thread which has been partially idle needs to disregard the cycles spent by the other threads of the core while the thread is idle. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-18 14:41:36 +00:00
larl %r1,smp_cpu_mtid
llgf %r1,0(%r1)
ltgr %r1,%r1
jz .Lpsw_idle_stcctm
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
.insn rsy,0xeb0000000017,%r1,5,__MT_CYCLES_ENTER(%r2)
s390/vtime: correct scaled cputime of partially idle CPUs The calculation for the SMT scaling factor for a hardware thread which has been partially idle needs to disregard the cycles spent by the other threads of the core while the thread is idle. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-18 14:41:36 +00:00
.Lpsw_idle_stcctm:
s390/spinlock: do not yield to a CPU in udelay/mdelay It does not make sense to try to relinquish the time slice with diag 0x9c to a CPU in a state that does not allow to schedule the CPU. The scenario where this can happen is a CPU waiting in udelay/mdelay while holding a spin-lock. Add a CIF bit to tag a CPU in enabled wait and use it to detect that the yield of a CPU will not be successful and skip the diagnose call. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-19 10:09:45 +00:00
oi __LC_CPU_FLAGS+7,_CIF_ENABLED_WAIT
s390: add options to change branch prediction behaviour for the kernel Add the PPA instruction to the system entry and exit path to switch the kernel to a different branch prediction behaviour. The instructions are added via CPU alternatives and can be disabled with the "nospec" or the "nobp=0" kernel parameter. If the default behaviour selected with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be used to enable the changed kernel branch prediction. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:11:45 +00:00
BPON
s390: assume stckf is always present With z10 as minimum supported machine generation the store-clock-fast facility (25) is always present and checked in als code. Drop alternatives and always use stckf. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-25 09:38:23 +00:00
stckf __CLOCK_IDLE_ENTER(%r2)
s390/vtimer: rework virtual timer interface The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20 09:15:08 +00:00
stpt __TIMER_IDLE_ENTER(%r2)
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 15:59:27 +00:00
lpswe __SF_EMPTY(%r15)
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_INNER_LABEL(psw_idle_exit, SYM_L_GLOBAL)
s390: move expoline assembler macros to a header To be able to use the expoline branches in different assembler files move the associated macros from entry.S to a new header nospec-insn.h. While we are at it make the macros a bit nicer to use. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-20 14:49:46 +00:00
BR_EX %r14
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_FUNC_END(psw_idle)
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 15:59:27 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Machine check handler routines
*/
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_START(mcck_int_handler)
s390: add options to change branch prediction behaviour for the kernel Add the PPA instruction to the system entry and exit path to switch the kernel to a different branch prediction behaviour. The instructions are added via CPU alternatives and can be disabled with the "nospec" or the "nobp=0" kernel parameter. If the default behaviour selected with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be used to enable the changed kernel branch prediction. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 06:11:45 +00:00
BPOFF
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
lmg %r8,%r9,__LC_MCK_OLD_PSW
s390/entry: add assembler macro to conveniently tests under mask Various functions in entry.S perform test-under-mask instructions to test for particular bits in memory. Because test-under-mask uses a mask value of one byte, the mask value and the offset into the memory must be calculated manually. This easily introduces errors and is hard to review and read. Introduce the TSTMSK assembler macro to specify a mask constant and let the macro calculate the offset and the byte mask to generate a test-under-mask instruction. The benefit is that existing symbolic constants can now be used for tests. Also the macro checks for zero mask values and mask values that consist of multiple bytes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-01 15:02:48 +00:00
TSTMSK __LC_MCCK_CODE,MCCK_CODE_SYSTEM_DAMAGE
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 16:00:08 +00:00
jo .Lmcck_panic # yes -> rest of mcck code invalid
s390/nmi: do register validation as early as possible The validation of the CPU registers in the machine check handler is currently split into two parts. The first part is done at the start of the low level mcck_int_handler function, this includes the CPU timer register and the general purpose registers. The second part is done a bit later in s390_do_machine_check for all the other registers, including the control registers, floating pointer control, vector or floating pointer registers, the access registers, the guarded storage registers, the TOD programmable registers and the clock comparator. This is working fine to far but in theory a future extensions could cause the C code to use registers that are not validated yet. A better approach is to validate all CPU registers in "safe" assembler code before any C function is called. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-12 11:24:48 +00:00
TSTMSK __LC_MCCK_CODE,MCCK_CODE_CR_VALID
jno .Lmcck_panic # control registers invalid -> panic
ptlb
s390/mcck: move register validation to C code This update partially reverts commit 3037a52f9846 ("s390/nmi: do register validation as early as possible"). Storage error checks and control registers validation are left in the assembler code, since correct ASCEs and page tables are required to enable DAT - which is done before the C handler is entered. System damage, kernel instruction address and PSW MWP checks are left in the assembler code as well, since there is no way to proceed if one of these checks is failed. The getcpu vdso syscall reads CPU number from the programmable field of the TOD clock. Disregard the TOD programmable register validity bit and load the CPU number into the TOD programmable field unconditionally. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 06:17:18 +00:00
lghi %r14,__LC_CPU_TIMER_SAVE_AREA
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
mvc __LC_MCCK_ENTER_TIMER(8),0(%r14)
s390/entry: add assembler macro to conveniently tests under mask Various functions in entry.S perform test-under-mask instructions to test for particular bits in memory. Because test-under-mask uses a mask value of one byte, the mask value and the offset into the memory must be calculated manually. This easily introduces errors and is hard to review and read. Introduce the TSTMSK assembler macro to specify a mask constant and let the macro calculate the offset and the byte mask to generate a test-under-mask instruction. The benefit is that existing symbolic constants can now be used for tests. Also the macro checks for zero mask values and mask values that consist of multiple bytes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-01 15:02:48 +00:00
TSTMSK __LC_MCCK_CODE,MCCK_CODE_CPU_TIMER_VALID
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
jo 3f
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 10:14:56 +00:00
la %r14,__LC_SYS_ENTER_TIMER
clc 0(8,%r14),__LC_EXIT_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
jl 1f
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 12:58:05 +00:00
la %r14,__LC_EXIT_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
1: clc 0(8,%r14),__LC_LAST_UPDATE_TIMER
jl 2f
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 12:58:05 +00:00
la %r14,__LC_LAST_UPDATE_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
2: spt 0(%r14)
[S390] idle time accounting vs. machine checks A machine check can interrupt the i/o and external interrupt handler anytime. If the machine check occurs while the interrupt handler is waking up from idle vtime_start_cpu can get executed a second time and the int_clock / async_enter_timer values in the lowcore get clobbered. This can confuse the cpu time accounting. To fix this problem two changes are needed. First the machine check handler has to use its own copies of int_clock and async_enter_timer, named mcck_clock and mcck_enter_timer. Second the nested execution of vtime_start_cpu has to be prevented. This is done in s390_idle_check by checking the wait bit in the program status word. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 08:00:03 +00:00
mvc __LC_MCCK_ENTER_TIMER(8),0(%r14)
s390/nmi: do register validation as early as possible The validation of the CPU registers in the machine check handler is currently split into two parts. The first part is done at the start of the low level mcck_int_handler function, this includes the CPU timer register and the general purpose registers. The second part is done a bit later in s390_do_machine_check for all the other registers, including the control registers, floating pointer control, vector or floating pointer registers, the access registers, the guarded storage registers, the TOD programmable registers and the clock comparator. This is working fine to far but in theory a future extensions could cause the C code to use registers that are not validated yet. A better approach is to validate all CPU registers in "safe" assembler code before any C function is called. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-12 11:24:48 +00:00
3: TSTMSK __LC_MCCK_CODE,MCCK_CODE_PSW_MWP_VALID
jno .Lmcck_panic
tmhh %r8,0x0001 # interrupting from user ?
s390/nmi: move storage error checking back to C, enter with DAT on Checking for storage errors in machine check entry code was done in order to handle also storage errors on kernel page tables. However this is extremely unlikely and some basic assumptions what works on machine check entry are necessary anyway. In order to simplify machine check handling delay checking for storage errors to C code. With this also change the machine check new PSW to have DAT on, which simplifies the entry code even further. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-11-29 16:22:14 +00:00
jnz .Lmcck_user
s390/nmi: do register validation as early as possible The validation of the CPU registers in the machine check handler is currently split into two parts. The first part is done at the start of the low level mcck_int_handler function, this includes the CPU timer register and the general purpose registers. The second part is done a bit later in s390_do_machine_check for all the other registers, including the control registers, floating pointer control, vector or floating pointer registers, the access registers, the guarded storage registers, the TOD programmable registers and the clock comparator. This is working fine to far but in theory a future extensions could cause the C code to use registers that are not validated yet. A better approach is to validate all CPU registers in "safe" assembler code before any C function is called. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-12 11:24:48 +00:00
TSTMSK __LC_MCCK_CODE,MCCK_CODE_PSW_IA_VALID
jno .Lmcck_panic
s390: open code SWITCH_KERNEL macro This is a preparation patch for two later bugfixes. In the past both int_handler and machine check handler used SWITCH_KERNEL to switch to the kernel stack. However, SWITCH_KERNEL doesn't work properly in machine check context. So instead of adding more complexity to this macro, just remove it. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Cc: <stable@kernel.org> # v5.8+ Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-01-28 12:06:05 +00:00
#if IS_ENABLED(CONFIG_KVM)
s390/entry: add CIF_SIE flag and remove sie64a() address check When a program check, interrupt or machine check is triggered, the PSW address is compared to a certain range of the sie64a() function to figure out whether SIE was interrupted and a cleanup of SIE is needed. This doesn't work with kprobes: If kprobes probes an instruction, it copies the instruction to the kprobes instruction page and overwrites the original instruction with an undefind instruction (Opcode 00). When this instruction is hit later, kprobes single-steps the instruction on the kprobes_instruction page. However, if this instruction is a relative branch instruction it will now point to a different location in memory due to being moved to the kprobes instruction page. If the new branch target points into sie64a() the kernel assumes it interrupted SIE when processing the breakpoint and will crash trying to access the SIE control block. Instead of comparing the address, introduce a new CIF_SIE flag which indicates whether SIE was interrupted. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-20 13:21:14 +00:00
TSTMSK __LC_CPU_FLAGS,_CIF_SIE
jz .Lmcck_user
# Need to compare the address instead of a CIF_SIE* flag.
# Otherwise there would be a race between setting the flag
# and entering SIE (or leaving and clearing the flag). This
# would cause machine checks targeted at the guest to be
# handled by the host.
s390/entry: remove OUTSIDE macro With only one OUTSIDE user left, remove the macro and move the code directly to the machine check handler. This has the advantage that it is much easier to determine which registers are used. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-20 14:18:56 +00:00
larl %r14,.Lsie_entry
clgrjl %r9,%r14, 4f
larl %r14,.Lsie_leave
clgrjhe %r9,%r14, 4f
s390/mcck: cleanup use of cleanup_sie_mcck cleanup_sie_mcck label is called from a single location only and thus does not need to be a subroutine. Move the labelled code to the caller - by doing that the SIE critical section checks appear next to each other and the SIE cleanup becomes bit more readable. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-05-17 06:18:13 +00:00
oi __LC_CPU_FLAGS+7, _CIF_MCCK_GUEST
s390/bp: remove TIF_ISOLATE_BP TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b00 ("s390: run user space and KVM guests with modified branch prediction"). Given that there is no use case remove it again. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-02-28 12:57:48 +00:00
4: BPENTER __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST
s390/entry: compare gmap asce to determine guest/host fault With the current implementation, there are some cornercases where a host fault would be treated as a guest fault, for example when the sie instruction causes a program check. Therefore store the gmap asce in ptregs, and use that to compare the primary asce from the fault instead of matching instruction addresses. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-03-13 08:51:22 +00:00
SIEEXIT __SF_SIE_CONTROL(%r15)
s390/mcck: optimize user mode check in case of !CONFIG_KVM In case of the !CONFIG_KVM use "jz" instead of "jnz" when detecting user mode and get rid of unnecessary jump as result. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Christia Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-22 17:06:18 +00:00
#endif
s390/nmi: move storage error checking back to C, enter with DAT on Checking for storage errors in machine check entry code was done in order to handle also storage errors on kernel page tables. However this is extremely unlikely and some basic assumptions what works on machine check entry are necessary anyway. In order to simplify machine check handling delay checking for storage errors to C code. With this also change the machine check new PSW to have DAT on, which simplifies the entry code even further. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-11-29 16:22:14 +00:00
.Lmcck_user:
s390: add stack for machine check handler The previous code used the normal kernel stack for machine checks. This is problematic when a machine check interrupts a system call or interrupt handler right at the beginning where registers are set up. Assume system_call is interrupted at the first instruction and a machine check is triggered. The machine check handler is called, checks the PSW to see whether it is coming from user space, notices that it is already in kernel mode but %r15 still contains the user space stack. This would lead to a kernel crash. There are basically two ways of fixing that: Either using the 'critical cleanup' approach which compares the address in the PSW to see whether it is already at a point where the stack has been set up, or use an extra stack for the machine check handler. For simplicity, we will go with the second approach and allocate an extra stack. This adds some memory overhead for large systems, but usually large system have plenty of memory so this isn't really a concern. But it keeps the mchk stack setup simple and less error prone. Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Cc: <stable@kernel.org> # v5.8+ Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-02-03 08:02:51 +00:00
lg %r15,__LC_MCCK_STACK
la %r11,STACK_FRAME_OVERHEAD(%r15)
s390: fix kernel asce loading when sie is interrupted If a machine check is coming in during sie, the PU saves the control registers to the machine check save area. Afterwards mcck_int_handler is called, which loads __LC_KERNEL_ASCE into %cr1. Later the code restores %cr1 from the machine check area, but that is wrong when SIE was interrupted because the machine check area still contains the gmap asce. Instead it should return with either __KERNEL_ASCE in %cr1 when interrupted in SIE or the previous %cr1 content saved in the machine check save area. Fixes: 87d598634521 ("s390/mm: remove set_fs / rework address space handling") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Cc: <stable@kernel.org> # v5.8+ Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-02-03 08:16:45 +00:00
stctg %c1,%c1,__PT_CR1(%r11)
s390: open code SWITCH_KERNEL macro This is a preparation patch for two later bugfixes. In the past both int_handler and machine check handler used SWITCH_KERNEL to switch to the kernel stack. However, SWITCH_KERNEL doesn't work properly in machine check context. So instead of adding more complexity to this macro, just remove it. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Cc: <stable@kernel.org> # v5.8+ Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-01-28 12:06:05 +00:00
lctlg %c1,%c1,__LC_KERNEL_ASCE
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
s390: critical section cleanup vs. machine checks The current machine check code uses the registers stored by the machine in the lowcore at __LC_GPREGS_SAVE_AREA as the registers of the interrupted context. The registers 0-7 of a user process can get clobbered if a machine checks interrupts the execution of a critical section in entry[64].S. The reason is that the critical section cleanup code may need to modify the PSW and the registers for the previous context to get to the end of a critical section. If registers 0-7 have to be replaced the relevant copy will be in the registers, which invalidates the copy in the lowcore. The machine check handler needs to explicitly store registers 0-7 to the stack. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 15:28:41 +00:00
lghi %r14,__LC_GPREGS_SAVE_AREA+64
stmg %r0,%r7,__PT_R0(%r11)
s390: scrub registers on kernel entry and KVM exit Clear all user space registers on entry to the kernel and all KVM guest registers on KVM guest exit if the register does not contain either a parameter or a result value. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-16 12:27:30 +00:00
# clear user controlled registers to prevent speculative use
xgr %r0,%r0
xgr %r1,%r1
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
xgr %r6,%r6
xgr %r7,%r7
xgr %r10,%r10
s390: critical section cleanup vs. machine checks The current machine check code uses the registers stored by the machine in the lowcore at __LC_GPREGS_SAVE_AREA as the registers of the interrupted context. The registers 0-7 of a user process can get clobbered if a machine checks interrupts the execution of a critical section in entry[64].S. The reason is that the critical section cleanup code may need to modify the PSW and the registers for the previous context to get to the end of a critical section. If registers 0-7 have to be replaced the relevant copy will be in the registers, which invalidates the copy in the lowcore. The machine check handler needs to explicitly store registers 0-7 to the stack. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 15:28:41 +00:00
mvc __PT_R8(64,%r11),0(%r14)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
stmg %r8,%r9,__PT_PSW(%r11)
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 10:55:07 +00:00
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:55:30 +00:00
brasl %r14,s390_do_machine_check
s390/mm: remove set_fs / rework address space handling Remove set_fs support from s390. With doing this rework address space handling and simplify it. As a result address spaces are now setup like this: CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE ----------------------------|-----------|-----------|----------- user space | user | user | kernel kernel, normal execution | kernel | user | kernel kernel, kvm guest execution | gmap | user | kernel To achieve this the getcpu vdso syscall is removed in order to avoid secondary address mode and a separate vdso address space in for user space. The getcpu vdso syscall will be implemented differently with a subsequent patch. The kernel accesses user space always via secondary address space. This happens in different ways: - with mvcos in home space mode and directly read/write to secondary address space - with mvcs/mvcp in primary space mode and copy from primary space to secondary space or vice versa - with e.g. cs in secondary space mode and access secondary space Switching translation modes happens with sacf before and after instructions which access user space, like before. Lazy handling of control register reloading is removed in the hope to make everything simpler, but at the cost of making kernel entry and exit a bit slower. That is: on kernel entry the primary asce is always changed to contain the kernel asce, and on kernel exit the primary asce is changed again so it contains the user asce. In kernel mode there is only one exception to the primary asce: when kvm guests are executed the primary asce contains the gmap asce (which describes the guest address space). The primary asce is reset to kernel asce whenever kvm guest execution is interrupted, so that this doesn't has to be taken into account for any user space accesses. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-16 07:06:40 +00:00
lctlg %c1,%c1,__PT_CR1(%r11)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
lmg %r0,%r10,__PT_R0(%r11)
mvc __LC_RETURN_MCCK_PSW(16),__PT_PSW(%r11) # move return PSW
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 12:58:05 +00:00
tm __LC_RETURN_MCCK_PSW+1,0x01 # returning to user ?
jno 0f
s390/bp: remove TIF_ISOLATE_BP TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b00 ("s390: run user space and KVM guests with modified branch prediction"). Given that there is no use case remove it again. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-02-28 12:57:48 +00:00
BPON
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 12:58:05 +00:00
stpt __LC_EXIT_TIMER
s390/alternatives: provide identical sized orginal/alternative sequences Explicitly provide identical sized original/alternative instruction sequences. This way there is no need for the s390 specific alternatives infrastructure to generate padding sequences. The code which generates such sequences will be removed with a follow on patch. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220511120532.2228616-2-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-11 12:05:25 +00:00
0: ALTERNATIVE "nop", __stringify(lghi %r12,__LC_LAST_BREAK_SAVE_AREA),193
s390: add support for BEAR enhancement facility The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-04-07 07:20:17 +00:00
LBEAR 0(%r12)
lmg %r11,%r15,__PT_R11(%r11)
LPSWEY __LC_RETURN_MCCK_PSW,__LC_RETURN_MCCK_LPSWE
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 16:00:08 +00:00
.Lmcck_panic:
s390/mcck: always enter C handler with DAT enabled The machine check handler must be entered with DAT disabled in case control registers are corrupted or a storage error happened and we can not tell if such error corresponds to a page table. Both of described conditions end up in stopping all CPUs and entering the disabled wait in C half of the handler. However, the storage errors are still checked after the DAT is enabled and C code is entered. In case a page table is damaged such flow is not expected to work. This update paves the way for moving the storage error checks from C to assembler half. All fatal errors that can only be handled with DAT disabled are handled in assembler half also. As result, the C half is only entered if the DAT is secured. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 06:17:15 +00:00
/*
* Iterate over all possible CPU addresses in the range 0..0xffff
* and stop each CPU using signal processor. Use compare and swap
* to allow just one CPU-stopper and prevent concurrent CPUs from
* stopping each other while leaving the others running.
*/
lhi %r5,0
lhi %r6,1
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
larl %r7,stop_lock
s390/mcck: always enter C handler with DAT enabled The machine check handler must be entered with DAT disabled in case control registers are corrupted or a storage error happened and we can not tell if such error corresponds to a page table. Both of described conditions end up in stopping all CPUs and entering the disabled wait in C half of the handler. However, the storage errors are still checked after the DAT is enabled and C code is entered. In case a page table is damaged such flow is not expected to work. This update paves the way for moving the storage error checks from C to assembler half. All fatal errors that can only be handled with DAT disabled are handled in assembler half also. As result, the C half is only entered if the DAT is secured. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 06:17:15 +00:00
cs %r5,%r6,0(%r7) # single CPU-stopper only
jnz 4f
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
larl %r7,this_cpu
s390/mcck: always enter C handler with DAT enabled The machine check handler must be entered with DAT disabled in case control registers are corrupted or a storage error happened and we can not tell if such error corresponds to a page table. Both of described conditions end up in stopping all CPUs and entering the disabled wait in C half of the handler. However, the storage errors are still checked after the DAT is enabled and C code is entered. In case a page table is damaged such flow is not expected to work. This update paves the way for moving the storage error checks from C to assembler half. All fatal errors that can only be handled with DAT disabled are handled in assembler half also. As result, the C half is only entered if the DAT is secured. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 06:17:15 +00:00
stap 0(%r7) # this CPU address
lh %r4,0(%r7)
nilh %r4,0
lhi %r0,1
sll %r0,16 # CPU counter
lhi %r3,0 # next CPU address
0: cr %r3,%r4
je 2f
1: sigp %r1,%r3,SIGP_STOP # stop next CPU
brc SIGP_CC_BUSY,1b
2: ahi %r3,1
brct %r0,0b
3: sigp %r1,%r4,SIGP_STOP # stop this CPU
brc SIGP_CC_BUSY,3b
4: j 4b
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_END(mcck_int_handler)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_START(restart_int_handler)
s390/alternatives: provide identical sized orginal/alternative sequences Explicitly provide identical sized original/alternative instruction sequences. This way there is no need for the s390 specific alternatives infrastructure to generate padding sequences. The code which generates such sequences will be removed with a follow on patch. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220511120532.2228616-2-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-11 12:05:25 +00:00
ALTERNATIVE "nop", "lpp _LPP_OFFSET", 40
s390/lpp: use assembler alternatives for the LPP instruction With the new macros for CPU alternatives the MACHINE_FLAG_LPP check around the LPP instruction can be optimized. After this is done the flag can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-26 13:23:33 +00:00
stg %r15,__LC_SAVE_AREA_RESTART
s390/smp: enable DAT before CPU restart callback is called The restart interrupt is triggered whenever a secondary CPU is brought online, a remote function call dispatched from another CPU or a manual PSW restart is initiated and causes the system to kdump. The handling routine is always called with DAT turned off. It then initializes the stack frame and invokes a callback. The existing callbacks handle DAT as follows: * __do_restart() and __machine_kexec() turn in on upon entry; * __ipl_run(), __reipl_run() and __dump_run() do not turn it right away, but all of them call diag308() - which turns DAT on, but only if kasan is enabled; In addition to the described complexity all callbacks (and the functions they call) should avoid kasan instrumentation while DAT is off. This update enables DAT in the assembler restart handler and relieves any callbacks (which are mostly C functions) from dealing with DAT altogether. There are four types of CPU restart that initialize control registers in different ways: 1. Start of secondary CPU on boot - control registers are inherited from the IPL CPU; 2. Restart of online CPU - control registers of the CPU being restarted are kept; 3. Hotplug of offline CPU - control registers are inherited from the starting CPU; 4. Start of offline CPU triggered by manual PSW restart - the control registers are read from the absolute lowcore and contain the boot time IPL CPU values updated with all follow-up calls of smp_ctl_set_bit() and smp_ctl_clear_bit() routines; In first three cases contents of the control registers is the most recent. In the latter case control registers are good enough to facilitate successful completion of kdump operation. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-24 13:30:21 +00:00
TSTMSK __LC_RESTART_FLAGS,RESTART_FLAG_CTLREGS,4
jz 0f
s390/entry: rely on long-displacement facility Since commit 4efd417f298b ("s390: raise minimum supported machine generation to z10"), the long-displacement facility is assumed and required for the kernel. Clean up a couple of places in the entry code, where long-displacement could be used directly instead of using a base register. However, there are still a few other places where a base register has to be used to extend short-displacement for the second lowcore page access. Notably, boot/head.S still has to be built for z900, and in mcck_int_handler, spt and lbear, which don't have long-displacements, but need to access save areas at the second lowcore page. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-28 09:09:09 +00:00
lctlg %c0,%c15,__LC_CREGS_SAVE_AREA
s390/entry: rework entering DAT-on mode on CPU restart Instead of enforcing PSW_MASK_DAT bit on previously stored in lowcore restart_psw.mask use the PSW_KERNEL_BITS mask (which contains PSW_MASK_DAT) directly. As result, the PSW mask stored in lowcore is only used to enter the CPU restart routine, while PSW_KERNEL_BITS is used to enter the kernel code - similarily to commit 64ea2977add2 ("s390/mm: start kernel with DAT enabled"). Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-04-18 15:40:37 +00:00
0: larl %r15,daton_psw
lpswe 0(%r15) # turn dat on, keep irqs off
.Ldaton:
[S390] rework smp code Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 15:59:26 +00:00
lg %r15,__LC_RESTART_STACK
s390: add support for virtually mapped kernel stacks With virtually mapped kernel stacks the kernel stack overflow detection is now fault based, every stack has a guard page in the vmalloc space. The panic_stack is renamed to nodat_stack and is used for all function that need to run without DAT, e.g. memcpy_real or do_start_kdump. The main effect is a reduction in the kernel image size as with vmap stacks the old style overflow checking that adds two instructions per function is not needed anymore. Result from bloat-o-meter: add/remove: 20/1 grow/shrink: 13/26854 up/down: 2198/-216240 (-214042) In regard to performance the micro-benchmark for fork has a hit of a few microseconds, allocating 4 pages in vmalloc space is more expensive compare to an order-2 page allocation. But with real workload I could not find a noticeable difference. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-12 14:37:33 +00:00
xc STACK_FRAME_OVERHEAD(__PT_SIZE,%r15),STACK_FRAME_OVERHEAD(%r15)
stmg %r0,%r14,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
mvc STACK_FRAME_OVERHEAD+__PT_R15(8,%r15),__LC_SAVE_AREA_RESTART
mvc STACK_FRAME_OVERHEAD+__PT_PSW(16,%r15),__LC_RST_OLD_PSW
[S390] rework smp code Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 15:59:26 +00:00
xc 0(STACK_FRAME_OVERHEAD,%r15),0(%r15)
s390/smp: make absolute lowcore / cpu restart parameter accesses more robust Setting the cpu restart parameters is done in three different fashions: - directly setting the four parameters individually - copying the four parameters with memcpy (using 4 * sizeof(long)) - copying the four parameters using a private structure In addition code in entry*.S relies on a certain order of the restart members of struct _lowcore. Make all of this more robust to future changes by adding a mem_absolute_assign(dest, val) define, which assigns val to dest using absolute addressing mode. Also the load multiple instructions in entry*.S have been split into separate load instruction so the order of the struct _lowcore members doesn't matter anymore. In addition move the prototypes of memcpy_real/absolute from uaccess.h to processor.h. These memcpy* variants are not related to uaccess at all. string.h doesn't seem to match as well, so lets use processor.h. Also replace the eight byte array in struct _lowcore which represents a misaliged u64 with a u64. The compiler will always create code that handles the misaligned u64 correctly. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05 07:59:52 +00:00
lg %r1,__LC_RESTART_FN # load fn, parm & source cpu
lg %r2,__LC_RESTART_DATA
s390/smp: enable DAT before CPU restart callback is called The restart interrupt is triggered whenever a secondary CPU is brought online, a remote function call dispatched from another CPU or a manual PSW restart is initiated and causes the system to kdump. The handling routine is always called with DAT turned off. It then initializes the stack frame and invokes a callback. The existing callbacks handle DAT as follows: * __do_restart() and __machine_kexec() turn in on upon entry; * __ipl_run(), __reipl_run() and __dump_run() do not turn it right away, but all of them call diag308() - which turns DAT on, but only if kasan is enabled; In addition to the described complexity all callbacks (and the functions they call) should avoid kasan instrumentation while DAT is off. This update enables DAT in the assembler restart handler and relieves any callbacks (which are mostly C functions) from dealing with DAT altogether. There are four types of CPU restart that initialize control registers in different ways: 1. Start of secondary CPU on boot - control registers are inherited from the IPL CPU; 2. Restart of online CPU - control registers of the CPU being restarted are kept; 3. Hotplug of offline CPU - control registers are inherited from the starting CPU; 4. Start of offline CPU triggered by manual PSW restart - the control registers are read from the absolute lowcore and contain the boot time IPL CPU values updated with all follow-up calls of smp_ctl_set_bit() and smp_ctl_clear_bit() routines; In first three cases contents of the control registers is the most recent. In the latter case control registers are good enough to facilitate successful completion of kdump operation. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-24 13:30:21 +00:00
lgf %r3,__LC_RESTART_SOURCE
[S390] rework smp code Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 15:59:26 +00:00
ltgr %r3,%r3 # test source cpu address
jm 1f # negative -> skip source stop
s390/sigp: use sigp order code defines in assembly code Use sigp order code defines in assembly code as well. With this change all places that use sigp constants should have been converted to use self describing defines instead of directly using constants. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-04 13:05:43 +00:00
0: sigp %r4,%r3,SIGP_SENSE # sigp sense to source cpu
[S390] rework smp code Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 15:59:26 +00:00
brc 10,0b # wait for status stored
1: basr %r14,%r1 # call function
stap __SF_EMPTY(%r15) # store cpu address
llgh %r3,__SF_EMPTY(%r15)
s390/sigp: use sigp order code defines in assembly code Use sigp order code defines in assembly code as well. With this change all places that use sigp constants should have been converted to use self describing defines instead of directly using constants. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-04 13:05:43 +00:00
2: sigp %r4,%r3,SIGP_STOP # sigp stop to current cpu
[S390] rework smp code Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 15:59:26 +00:00
brc 2,2b
3: j 3b
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_END(restart_int_handler)
[S390] Add PSW restart shutdown trigger With this patch a new S390 shutdown trigger "restart" is added. If under z/VM "systerm restart" is entered or under the HMC the "PSW restart" button is pressed, the PSW located at 0 (31 bit) or 0x1a0 (64 bit) bit is loaded. Now we execute do_restart() that processes the restart action that is defined under /sys/firmware/shutdown_actions/on_restart. Currently the following actions are possible: reipl (default), stop, vmcmd, dump, and dump_reipl. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 14:44:19 +00:00
[S390] add kprobes annotations Add kprobes annotations to get the massive 'probe kernel.function("*") {}' stress test working. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05 11:47:25 +00:00
.section .kprobes.text, "ax"
s390: add support for virtually mapped kernel stacks With virtually mapped kernel stacks the kernel stack overflow detection is now fault based, every stack has a guard page in the vmalloc space. The panic_stack is renamed to nodat_stack and is used for all function that need to run without DAT, e.g. memcpy_real or do_start_kdump. The main effect is a reduction in the kernel image size as with vmap stacks the old style overflow checking that adds two instructions per function is not needed anymore. Result from bloat-o-meter: add/remove: 20/1 grow/shrink: 13/26854 up/down: 2198/-216240 (-214042) In regard to performance the micro-benchmark for fork has a hit of a few microseconds, allocating 4 pages in vmalloc space is more expensive compare to an order-2 page allocation. But with real workload I could not find a noticeable difference. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-12 14:37:33 +00:00
#if defined(CONFIG_CHECK_STACK) || defined(CONFIG_VMAP_STACK)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* The synchronous or the asynchronous stack overflowed. We are dead.
* No need to properly save the registers, we are going to panic anyway.
* Setup a pt_regs so that show_trace can provide a good call trace.
*/
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_START(stack_overflow)
s390: add support for virtually mapped kernel stacks With virtually mapped kernel stacks the kernel stack overflow detection is now fault based, every stack has a guard page in the vmalloc space. The panic_stack is renamed to nodat_stack and is used for all function that need to run without DAT, e.g. memcpy_real or do_start_kdump. The main effect is a reduction in the kernel image size as with vmap stacks the old style overflow checking that adds two instructions per function is not needed anymore. Result from bloat-o-meter: add/remove: 20/1 grow/shrink: 13/26854 up/down: 2198/-216240 (-214042) In regard to performance the micro-benchmark for fork has a hit of a few microseconds, allocating 4 pages in vmalloc space is more expensive compare to an order-2 page allocation. But with real workload I could not find a noticeable difference. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-12 14:37:33 +00:00
lg %r15,__LC_NODAT_STACK # change to panic stack
s390: lowcore stack pointer offsets Store the stack pointers in the lowcore for the kernel stack, the async stack and the panic stack with the offset required for the first user. This avoids an unnecessary add instruction on the system call path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-24 08:20:43 +00:00
la %r11,STACK_FRAME_OVERHEAD(%r15)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 10:27:15 +00:00
stmg %r0,%r7,__PT_R0(%r11)
stmg %r8,%r9,__PT_PSW(%r11)
mvc __PT_R8(64,%r11),0(%r14)
stg %r10,__PT_ORIG_GPR2(%r11) # store last break to orig_gpr2
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jg kernel_stack_overflow
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_CODE_END(stack_overflow)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
s390/mcck: always enter C handler with DAT enabled The machine check handler must be entered with DAT disabled in case control registers are corrupted or a storage error happened and we can not tell if such error corresponds to a page table. Both of described conditions end up in stopping all CPUs and entering the disabled wait in C half of the handler. However, the storage errors are still checked after the DAT is enabled and C code is entered. In case a page table is damaged such flow is not expected to work. This update paves the way for moving the storage error checks from C to assembler half. All fatal errors that can only be handled with DAT disabled are handled in assembler half also. As result, the C half is only entered if the DAT is secured. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 06:17:15 +00:00
.section .data, "aw"
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
.balign 4
SYM_DATA_LOCAL(stop_lock, .long 0)
SYM_DATA_LOCAL(this_cpu, .short 0)
s390/entry: rework entering DAT-on mode on CPU restart Instead of enforcing PSW_MASK_DAT bit on previously stored in lowcore restart_psw.mask use the PSW_KERNEL_BITS mask (which contains PSW_MASK_DAT) directly. As result, the PSW mask stored in lowcore is only used to enter the CPU restart routine, while PSW_KERNEL_BITS is used to enter the kernel code - similarily to commit 64ea2977add2 ("s390/mm: start kernel with DAT enabled"). Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-04-18 15:40:37 +00:00
.balign 8
SYM_DATA_START_LOCAL(daton_psw)
.quad PSW_KERNEL_BITS
.quad .Ldaton
SYM_DATA_END(daton_psw)
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
s390: remove 31 bit syscalls Remove the 31 bit syscalls from the syscall table. This is a separate patch just in case I screwed something up so it can be easily reverted. However the conversion was done with a script, so everything should be ok. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-13 13:44:29 +00:00
.section .rodata, "a"
s390/kernel: convert SYSCALL and PGM_CHECK handlers to .quad With a relocatable kernel that could reside at any place in memory, the storage size for the SYSCALL and PGM_CHECK handlers needs to be increased from .long to .quad. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 20:36:13 +00:00
#define SYSCALL(esame,emu) .quad __s390x_ ## esame
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_DATA_START(sys_call_table)
s390/syscalls: use generated syscall_table.h and unistd.h header files Update the uapi/asm/unistd.h to include the generated compat and 64-bit version of the unistd.h and, as well as, the unistd_nr.h header file. Also remove the arch/s390/kernel/syscalls.S file and use the generated system call table, syscall_table.h, instead. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-12-11 13:47:27 +00:00
#include "asm/syscall_table.h"
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_DATA_END(sys_call_table)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#undef SYSCALL
[PATCH] s390: cleanup Kconfig Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:19:28 +00:00
#ifdef CONFIG_COMPAT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
s390/kernel: convert SYSCALL and PGM_CHECK handlers to .quad With a relocatable kernel that could reside at any place in memory, the storage size for the SYSCALL and PGM_CHECK handlers needs to be increased from .long to .quad. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 20:36:13 +00:00
#define SYSCALL(esame,emu) .quad __s390_ ## emu
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_DATA_START(sys_call_table_emu)
s390/syscalls: use generated syscall_table.h and unistd.h header files Update the uapi/asm/unistd.h to include the generated compat and 64-bit version of the unistd.h and, as well as, the unistd_nr.h header file. Also remove the arch/s390/kernel/syscalls.S file and use the generated system call table, syscall_table.h, instead. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-12-11 13:47:27 +00:00
#include "asm/syscall_table.h"
s390/entry: use SYM* macros instead of ENTRY(), etc. Consistently use the SYM* family of macros instead of the deprecated ENTRY(), ENDPROC(), etc. family of macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-17 12:45:15 +00:00
SYM_DATA_END(sys_call_table_emu)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#undef SYSCALL
#endif