DSA: Convert repeated msleep calls to timeouts

Convert DSA msleep calls to timeout/usleep_range calls
as reported by checkpatch.pl.

Signed-off-by: Barry Grussling <barry@grussling.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Barry Grussling 2013-01-08 16:05:54 +00:00 committed by David S. Miller
parent 3675c8d714
commit 19b2f97e46
4 changed files with 34 additions and 18 deletions

View File

@ -8,6 +8,8 @@
* (at your option) any later version.
*/
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
@ -66,6 +68,7 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
{
int i;
int ret;
unsigned long timeout;
/* Set all ports to the disabled state. */
for (i = 0; i < 6; i++) {
@ -74,20 +77,21 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
}
/* Wait for transmit queues to drain. */
msleep(2);
usleep_range(2000, 4000);
/* Reset the switch. */
REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
/* Wait up to one second for reset to complete. */
for (i = 0; i < 1000; i++) {
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, 0x00);
if ((ret & 0x8000) == 0x0000)
break;
msleep(1);
usleep_range(1000, 2000);
}
if (i == 1000)
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
return 0;

View File

@ -8,6 +8,8 @@
* (at your option) any later version.
*/
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
@ -50,6 +52,7 @@ static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds)
{
int i;
int ret;
unsigned long timeout;
/* Set all ports to the disabled state. */
for (i = 0; i < 8; i++) {
@ -58,20 +61,21 @@ static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds)
}
/* Wait for transmit queues to drain. */
msleep(2);
usleep_range(2000, 4000);
/* Reset the switch. */
REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
/* Wait up to one second for reset to complete. */
for (i = 0; i < 1000; i++) {
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, 0x00);
if ((ret & 0xc800) == 0xc800)
break;
msleep(1);
usleep_range(1000, 2000);
}
if (i == 1000)
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
return 0;

View File

@ -8,6 +8,8 @@
* (at your option) any later version.
*/
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
@ -42,6 +44,7 @@ static int mv88e6131_switch_reset(struct dsa_switch *ds)
{
int i;
int ret;
unsigned long timeout;
/* Set all ports to the disabled state. */
for (i = 0; i < 11; i++) {
@ -50,20 +53,21 @@ static int mv88e6131_switch_reset(struct dsa_switch *ds)
}
/* Wait for transmit queues to drain. */
msleep(2);
usleep_range(2000, 4000);
/* Reset the switch. */
REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
/* Wait up to one second for reset to complete. */
for (i = 0; i < 1000; i++) {
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, 0x00);
if ((ret & 0xc800) == 0xc800)
break;
msleep(1);
usleep_range(1000, 2000);
}
if (i == 1000)
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
return 0;

View File

@ -8,6 +8,8 @@
* (at your option) any later version.
*/
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
@ -196,14 +198,15 @@ int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val)
static int mv88e6xxx_ppu_disable(struct dsa_switch *ds)
{
int ret;
int i;
unsigned long timeout;
ret = REG_READ(REG_GLOBAL, 0x04);
REG_WRITE(REG_GLOBAL, 0x04, ret & ~0x4000);
for (i = 0; i < 1000; i++) {
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, 0x00);
msleep(1);
usleep_range(1000, 2000);
if ((ret & 0xc000) != 0xc000)
return 0;
}
@ -214,14 +217,15 @@ static int mv88e6xxx_ppu_disable(struct dsa_switch *ds)
static int mv88e6xxx_ppu_enable(struct dsa_switch *ds)
{
int ret;
int i;
unsigned long timeout;
ret = REG_READ(REG_GLOBAL, 0x04);
REG_WRITE(REG_GLOBAL, 0x04, ret | 0x4000);
for (i = 0; i < 1000; i++) {
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, 0x00);
msleep(1);
usleep_range(1000, 2000);
if ((ret & 0xc000) == 0xc000)
return 0;
}