PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present

[ Upstream commit 45514f78c6 ]

The CLKREQ# signal is an open drain, active low signal that is driven
low by the remote Endpoint device. But it might not be driven low if no
Endpoint device is connected.

On i.MX8MM PCIe, phy_init() may fail and system boot may hang if no
Endpoint is connected to assert CLKREQ#.

Handle this as on i.MX8MQ, where we explicitly assert CLKREQ# so the
PHY can be initialized.

Link: https://lore.kernel.org/r/1645672013-8949-1-git-send-email-hongxing.zhu@nxp.com
Fixes: 178e244cb6 ("PCI: imx: Add the imx8mm pcie support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Richard Zhu 2022-02-24 11:06:53 +08:00 committed by Greg Kroah-Hartman
parent 4a1a82dc95
commit 43bfb1a40d

View file

@ -453,10 +453,6 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
case IMX7D:
break;
case IMX8MM:
ret = clk_prepare_enable(imx6_pcie->pcie_aux);
if (ret)
dev_err(dev, "unable to enable pcie_aux clock\n");
break;
case IMX8MQ:
ret = clk_prepare_enable(imx6_pcie->pcie_aux);
if (ret) {