Merge branch for-rmk-devel of git://aeryn.fluff.org.uk/bjdooks/linux into devel

This commit is contained in:
Russell King 2009-06-10 22:40:55 +01:00 committed by Russell King
commit 547c32aeb5
118 changed files with 4530 additions and 1359 deletions

View File

@ -51,7 +51,7 @@ PIN Numbers
-----------
Each pin has an unique number associated with it in regs-gpio.h,
eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell
eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
the GPIO functions which pin is to be used.
@ -65,11 +65,11 @@ Configuring a pin
Eg:
s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
which would turn GPA0 into the lowest Address line A0, and set
GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line.
which would turn GPA(0) into the lowest Address line A0, and set
GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
Reading the current configuration

View File

@ -4,6 +4,13 @@ config ARM_GIC
config ARM_VIC
bool
config ARM_VIC_NR
int
default 2
help
The maximum number of VICs available in the system, for
power management.
config ICST525
bool

View File

@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
#include <linux/sysdev.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
@ -39,11 +40,219 @@ static void vic_unmask_irq(unsigned int irq)
writel(1 << irq, base + VIC_INT_ENABLE);
}
/**
* vic_init2 - common initialisation code
* @base: Base of the VIC.
*
* Common initialisation code for registeration
* and resume.
*/
static void vic_init2(void __iomem *base)
{
int i;
for (i = 0; i < 16; i++) {
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(VIC_VECT_CNTL_ENABLE | i, reg);
}
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
#if defined(CONFIG_PM)
/**
* struct vic_device - VIC PM device
* @sysdev: The system device which is registered.
* @irq: The IRQ number for the base of the VIC.
* @base: The register base for the VIC.
* @resume_sources: A bitmask of interrupts for resume.
* @resume_irqs: The IRQs enabled for resume.
* @int_select: Save for VIC_INT_SELECT.
* @int_enable: Save for VIC_INT_ENABLE.
* @soft_int: Save for VIC_INT_SOFT.
* @protect: Save for VIC_PROTECT.
*/
struct vic_device {
struct sys_device sysdev;
void __iomem *base;
int irq;
u32 resume_sources;
u32 resume_irqs;
u32 int_select;
u32 int_enable;
u32 soft_int;
u32 protect;
};
/* we cannot allocate memory when VICs are initially registered */
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
static inline struct vic_device *to_vic(struct sys_device *sys)
{
return container_of(sys, struct vic_device, sysdev);
}
static int vic_id;
static int vic_class_resume(struct sys_device *dev)
{
struct vic_device *vic = to_vic(dev);
void __iomem *base = vic->base;
printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
/* re-initialise static settings */
vic_init2(base);
writel(vic->int_select, base + VIC_INT_SELECT);
writel(vic->protect, base + VIC_PROTECT);
/* set the enabled ints and then clear the non-enabled */
writel(vic->int_enable, base + VIC_INT_ENABLE);
writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
/* and the same for the soft-int register */
writel(vic->soft_int, base + VIC_INT_SOFT);
writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
return 0;
}
static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
{
struct vic_device *vic = to_vic(dev);
void __iomem *base = vic->base;
printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
vic->int_select = readl(base + VIC_INT_SELECT);
vic->int_enable = readl(base + VIC_INT_ENABLE);
vic->soft_int = readl(base + VIC_INT_SOFT);
vic->protect = readl(base + VIC_PROTECT);
/* set the interrupts (if any) that are used for
* resuming the system */
writel(vic->resume_irqs, base + VIC_INT_ENABLE);
writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
return 0;
}
struct sysdev_class vic_class = {
.name = "vic",
.suspend = vic_class_suspend,
.resume = vic_class_resume,
};
/**
* vic_pm_register - Register a VIC for later power management control
* @base: The base address of the VIC.
* @irq: The base IRQ for the VIC.
* @resume_sources: bitmask of interrupts allowed for resume sources.
*
* Register the VIC with the system device tree so that it can be notified
* of suspend and resume requests and ensure that the correct actions are
* taken to re-instate the settings on resume.
*/
static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
{
struct vic_device *v;
if (vic_id >= ARRAY_SIZE(vic_devices))
printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
else {
v = &vic_devices[vic_id];
v->base = base;
v->resume_sources = resume_sources;
v->irq = irq;
vic_id++;
}
}
/**
* vic_pm_init - initicall to register VIC pm
*
* This is called via late_initcall() to register
* the resources for the VICs due to the early
* nature of the VIC's registration.
*/
static int __init vic_pm_init(void)
{
struct vic_device *dev = vic_devices;
int err;
int id;
if (vic_id == 0)
return 0;
err = sysdev_class_register(&vic_class);
if (err) {
printk(KERN_ERR "%s: cannot register class\n", __func__);
return err;
}
for (id = 0; id < vic_id; id++, dev++) {
dev->sysdev.id = id;
dev->sysdev.cls = &vic_class;
err = sysdev_register(&dev->sysdev);
if (err) {
printk(KERN_ERR "%s: failed to register device\n",
__func__);
return err;
}
}
return 0;
}
late_initcall(vic_pm_init);
static struct vic_device *vic_from_irq(unsigned int irq)
{
struct vic_device *v = vic_devices;
unsigned int base_irq = irq & ~31;
int id;
for (id = 0; id < vic_id; id++, v++) {
if (v->irq == base_irq)
return v;
}
return NULL;
}
static int vic_set_wake(unsigned int irq, unsigned int on)
{
struct vic_device *v = vic_from_irq(irq);
unsigned int off = irq & 31;
if (!v)
return -EINVAL;
if (on)
v->resume_irqs |= 1 << off;
else
v->resume_irqs &= ~(1 << off);
return 0;
}
#else
static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
#define vic_set_wake NULL
#endif /* CONFIG_PM */
static struct irq_chip vic_chip = {
.name = "VIC",
.ack = vic_mask_irq,
.mask = vic_mask_irq,
.unmask = vic_unmask_irq,
.set_wake = vic_set_wake,
};
/**
@ -51,9 +260,10 @@ static struct irq_chip vic_chip = {
* @base: iomem base address
* @irq_start: starting interrupt number, must be muliple of 32
* @vic_sources: bitmask of interrupt sources to allow
* @resume_sources: bitmask of interrupt sources to allow for resume
*/
void __init vic_init(void __iomem *base, unsigned int irq_start,
u32 vic_sources)
u32 vic_sources, u32 resume_sources)
{
unsigned int i;
@ -77,12 +287,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
writel(value, base + VIC_PL190_VECT_ADDR);
}
for (i = 0; i < 16; i++) {
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(VIC_VECT_CNTL_ENABLE | i, reg);
}
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
vic_init2(base);
for (i = 0; i < 32; i++) {
if (vic_sources & (1 << i)) {
@ -94,4 +299,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
vic_pm_register(base, irq_start, resume_sources);
}

View File

@ -0,0 +1,138 @@
/* arch/arm/include/asm/hardware/pl080.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* ARM PrimeCell PL080 DMA controller
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* Note, there are some Samsung updates to this controller block which
* make it not entierly compatible with the PL080 specification from
* ARM. When in doubt, check the Samsung documentation first.
*
* The Samsung defines are PL080S, and add an extra controll register,
* the ability to move more than 2^11 counts of data and some extra
* OneNAND features.
*/
#define PL080_INT_STATUS (0x00)
#define PL080_TC_STATUS (0x04)
#define PL080_TC_CLEAR (0x08)
#define PL080_ERR_STATUS (0x0C)
#define PL080_ERR_CLEAR (0x10)
#define PL080_RAW_TC_STATUS (0x14)
#define PL080_RAW_ERR_STATUS (0x18)
#define PL080_EN_CHAN (0x1c)
#define PL080_SOFT_BREQ (0x20)
#define PL080_SOFT_SREQ (0x24)
#define PL080_SOFT_LBREQ (0x28)
#define PL080_SOFT_LSREQ (0x2C)
#define PL080_CONFIG (0x30)
#define PL080_CONFIG_M2_BE (1 << 2)
#define PL080_CONFIG_M1_BE (1 << 1)
#define PL080_CONFIG_ENABLE (1 << 0)
#define PL080_SYNC (0x34)
/* Per channel configuration registers */
#define PL008_Cx_STRIDE (0x20)
#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20)))
#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20)))
#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20)))
#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20)))
#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20)))
#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20)))
#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20)))
#define PL080_CH_SRC_ADDR (0x00)
#define PL080_CH_DST_ADDR (0x04)
#define PL080_CH_LLI (0x08)
#define PL080_CH_CONTROL (0x0C)
#define PL080_CH_CONFIG (0x10)
#define PL080S_CH_CONTROL2 (0x10)
#define PL080S_CH_CONFIG (0x14)
#define PL080_LLI_ADDR_MASK (0x3fffffff << 2)
#define PL080_LLI_ADDR_SHIFT (2)
#define PL080_LLI_LM_AHB2 (1 << 0)
#define PL080_CONTROL_TC_IRQ_EN (1 << 31)
#define PL080_CONTROL_PROT_MASK (0x7 << 28)
#define PL080_CONTROL_PROT_SHIFT (28)
#define PL080_CONTROL_PROT_SYS (1 << 28)
#define PL080_CONTROL_DST_INCR (1 << 27)
#define PL080_CONTROL_SRC_INCR (1 << 26)
#define PL080_CONTROL_DST_AHB2 (1 << 25)
#define PL080_CONTROL_SRC_AHB2 (1 << 24)
#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21)
#define PL080_CONTROL_DWIDTH_SHIFT (21)
#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18)
#define PL080_CONTROL_SWIDTH_SHIFT (18)
#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15)
#define PL080_CONTROL_DB_SIZE_SHIFT (15)
#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12)
#define PL080_CONTROL_SB_SIZE_SHIFT (12)
#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0)
#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0)
#define PL080_BSIZE_1 (0x0)
#define PL080_BSIZE_4 (0x1)
#define PL080_BSIZE_8 (0x2)
#define PL080_BSIZE_16 (0x3)
#define PL080_BSIZE_32 (0x4)
#define PL080_BSIZE_64 (0x5)
#define PL080_BSIZE_128 (0x6)
#define PL080_BSIZE_256 (0x7)
#define PL080_WIDTH_8BIT (0x0)
#define PL080_WIDTH_16BIT (0x1)
#define PL080_WIDTH_32BIT (0x2)
#define PL080_CONFIG_HALT (1 << 18)
#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */
#define PL080_CONFIG_LOCK (1 << 16)
#define PL080_CONFIG_TC_IRQ_MASK (1 << 15)
#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14)
#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11)
#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11)
#define PL080_CONFIG_DST_SEL_MASK (0xf << 6)
#define PL080_CONFIG_DST_SEL_SHIFT (6)
#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1)
#define PL080_CONFIG_SRC_SEL_SHIFT (1)
#define PL080_CONFIG_ENABLE (1 << 0)
#define PL080_FLOW_MEM2MEM (0x0)
#define PL080_FLOW_MEM2PER (0x1)
#define PL080_FLOW_PER2MEM (0x2)
#define PL080_FLOW_SRC2DST (0x3)
#define PL080_FLOW_SRC2DST_DST (0x4)
#define PL080_FLOW_MEM2PER_PER (0x5)
#define PL080_FLOW_PER2MEM_PER (0x6)
#define PL080_FLOW_SRC2DST_SRC (0x7)
/* DMA linked list chain structure */
struct pl080_lli {
u32 src_addr;
u32 dst_addr;
u32 next_lli;
u32 control0;
};
struct pl080s_lli {
u32 src_addr;
u32 dst_addr;
u32 next_lli;
u32 control0;
u32 control1;
};

View File

@ -41,7 +41,7 @@
#define VIC_PL192_VECT_ADDR 0xF00
#ifndef __ASSEMBLY__
void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
#endif
#endif

View File

@ -362,8 +362,8 @@ void __init ep93xx_init_irq(void)
{
int gpio_irq;
vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
for (gpio_irq = gpio_to_irq(0);
gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {

View File

@ -168,7 +168,7 @@ void __init netx_init_irq(void)
{
int irq;
vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0);
vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0);
for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
set_irq_chip(irq, &netx_hif_chip);

View File

@ -33,10 +33,10 @@
int s3c2400_gpio_getirq(unsigned int pin)
{
if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
return -1; /* not valid interrupts */
if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7))
return -EINVAL; /* not valid interrupts */
return (pin - S3C2410_GPE0) + IRQ_EINT0;
return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
}
EXPORT_SYMBOL(s3c2400_gpio_getirq);

View File

@ -59,6 +59,7 @@ config ARCH_H1940
bool "IPAQ H1940"
select CPU_S3C2410
select PM_H1940 if PM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the HP IPAQ H1940
@ -70,6 +71,7 @@ config PM_H1940
config MACH_N30
bool "Acer N30 family"
select CPU_S3C2410
select S3C_DEV_USB_HOST
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
@ -82,6 +84,7 @@ config ARCH_BAST
select MACH_BAST_IDE
select S3C24XX_DCLK
select ISA
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
@ -89,6 +92,7 @@ config ARCH_BAST
config MACH_OTOM
bool "NexVision OTOM Board"
select CPU_S3C2410
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision OTOM board
@ -96,6 +100,7 @@ config MACH_AML_M5900
bool "AML M5900 Series"
select CPU_S3C2410
select PM_SIMTEC if PM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the American Microsystems M5900 Series
<http://www.amltd.com>
@ -111,6 +116,7 @@ config BAST_PC104_IRQ
config MACH_TCT_HAMMER
bool "TCT Hammer Board"
select CPU_S3C2410
select S3C_DEV_USB_HOST
help
Say Y here if you are using the TinCanTools Hammer Board
<http://www.tincantools.com>
@ -122,12 +128,14 @@ config MACH_VR1000
select SIMTEC_NOR
select MACH_BAST_IDE
select CPU_S3C2410
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Thorcom VR1000 board.
config MACH_QT2410
bool "QT2410"
select CPU_S3C2410
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Armzone QT2410

View File

@ -17,14 +17,16 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/dma-plat.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>

View File

@ -39,12 +39,12 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
unsigned long flags;
unsigned long val;
if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
return -1;
if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
return -EINVAL;
config &= 0xff;
pin -= S3C2410_GPG8;
pin -= S3C2410_GPG(8);
reg += pin & ~3;
local_irq_save(flags);

View File

@ -16,6 +16,8 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <mach/h1940-latch.h>
@ -41,9 +43,9 @@ static void h1940bt_enable(int on)
h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
/* Reset the chip */
mdelay(10);
s3c2410_gpio_setpin(S3C2410_GPH1, 1);
s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
s3c2410_gpio_setpin(S3C2410_GPH1, 0);
s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
state = 1;
}
@ -52,9 +54,9 @@ static void h1940bt_enable(int on)
led_trigger_event(bt_led_trigger, 0);
#endif
s3c2410_gpio_setpin(S3C2410_GPH1, 1);
s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
s3c2410_gpio_setpin(S3C2410_GPH1, 0);
s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
mdelay(10);
h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
@ -87,14 +89,14 @@ static DEVICE_ATTR(enable, 0644,
static int __init h1940bt_probe(struct platform_device *pdev)
{
/* Configures BT serial port GPIOs */
s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
s3c2410_gpio_pullup(S3C2410_GPH0, 1);
s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
s3c2410_gpio_pullup(S3C2410_GPH1, 1);
s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
s3c2410_gpio_pullup(S3C2410_GPH2, 1);
s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
s3c2410_gpio_pullup(S3C2410_GPH3, 1);
s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
#ifdef CONFIG_LEDS_H1940
led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);

View File

@ -3,7 +3,7 @@
* Copyright (C) 2003,2004,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C241XX DMA support
* Samsung S3C24XX DMA support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -13,8 +13,8 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
#include <plat/dma.h>
#include <linux/sysdev.h>
#include <mach/hardware.h>
#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
@ -55,9 +55,9 @@ enum dma_ch {
/* we have 4 dma channels */
#ifndef CONFIG_CPU_S3C2443
#define S3C2410_DMA_CHANNELS (4)
#define S3C_DMA_CHANNELS (4)
#else
#define S3C2410_DMA_CHANNELS (6)
#define S3C_DMA_CHANNELS (6)
#endif
/* types */
@ -68,7 +68,6 @@ enum s3c2410_dma_state {
S3C2410_DMA_PAUSED
};
/* enum s3c2410_dma_loadst
*
* This represents the state of the DMA engine, wrt to the loaded / running
@ -104,32 +103,6 @@ enum s3c2410_dma_loadst {
S3C2410_DMALOAD_1LOADED_1RUNNING,
};
enum s3c2410_dma_buffresult {
S3C2410_RES_OK,
S3C2410_RES_ERR,
S3C2410_RES_ABORT
};
enum s3c2410_dmasrc {
S3C2410_DMASRC_HW, /* source is memory */
S3C2410_DMASRC_MEM /* source is hardware */
};
/* enum s3c2410_chan_op
*
* operation codes passed to the DMA code by the user, and also used
* to inform the current channel owner of any changes to the system state
*/
enum s3c2410_chan_op {
S3C2410_DMAOP_START,
S3C2410_DMAOP_STOP,
S3C2410_DMAOP_PAUSE,
S3C2410_DMAOP_RESUME,
S3C2410_DMAOP_FLUSH,
S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
S3C2410_DMAOP_STARTED, /* indicate channel started */
};
/* flags */
@ -139,17 +112,14 @@ enum s3c2410_chan_op {
/* dma buffer */
struct s3c2410_dma_client {
char *name;
};
struct s3c2410_dma_buf;
/* s3c2410_dma_buf_s
/* s3c2410_dma_buf
*
* internally used buffer structure to describe a queued or running
* buffer.
*/
struct s3c2410_dma_buf;
struct s3c2410_dma_buf {
struct s3c2410_dma_buf *next;
int magic; /* magic */
@ -161,20 +131,6 @@ struct s3c2410_dma_buf {
/* [1] is this updated for both recv/send modes? */
struct s3c2410_dma_chan;
/* s3c2410_dma_cbfn_t
*
* buffer callback routine type
*/
typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
void *buf, int size,
enum s3c2410_dma_buffresult result);
typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
enum s3c2410_chan_op );
struct s3c2410_dma_stats {
unsigned long loads;
unsigned long timeout_longest;
@ -206,10 +162,10 @@ struct s3c2410_dma_chan {
/* channel configuration */
enum s3c2410_dmasrc source;
enum dma_ch req_ch;
unsigned long dev_addr;
unsigned long load_timeout;
unsigned int flags; /* channel flags */
unsigned int hw_cfg; /* last hw config */
struct s3c24xx_dma_map *map; /* channel hw maps */
@ -236,213 +192,6 @@ struct s3c2410_dma_chan {
struct sys_device dev;
};
/* the currently allocated channel information */
extern struct s3c2410_dma_chan s3c2410_chans[];
/* note, we don't really use dma_device_t at the moment */
typedef unsigned long dma_device_t;
/* functions --------------------------------------------------------------- */
/* s3c2410_dma_request
*
* request a dma channel exclusivley
*/
extern int s3c2410_dma_request(unsigned int channel,
struct s3c2410_dma_client *, void *dev);
/* s3c2410_dma_ctrl
*
* change the state of the dma channel
*/
extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
/* s3c2410_dma_setflags
*
* set the channel's flags to a given state
*/
extern int s3c2410_dma_setflags(unsigned int channel,
unsigned int flags);
/* s3c2410_dma_free
*
* free the dma channel (will also abort any outstanding operations)
*/
extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
/* s3c2410_dma_enqueue
*
* place the given buffer onto the queue of operations for the channel.
* The buffer must be allocated from dma coherent memory, or the Dcache/WB
* drained before the buffer is given to the DMA system.
*/
extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
dma_addr_t data, int size);
/* s3c2410_dma_config
*
* configure the dma channel
*/
extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
/* s3c2410_dma_devconfig
*
* configure the device we're talking to
*/
extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
int hwcfg, unsigned long devaddr);
/* s3c2410_dma_getposition
*
* get the position that the dma transfer is currently at
*/
extern int s3c2410_dma_getposition(unsigned int channel,
dma_addr_t *src, dma_addr_t *dest);
extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
/* DMA Register definitions */
#define S3C2410_DMA_DISRC (0x00)
#define S3C2410_DMA_DISRCC (0x04)
#define S3C2410_DMA_DIDST (0x08)
#define S3C2410_DMA_DIDSTC (0x0C)
#define S3C2410_DMA_DCON (0x10)
#define S3C2410_DMA_DSTAT (0x14)
#define S3C2410_DMA_DCSRC (0x18)
#define S3C2410_DMA_DCDST (0x1C)
#define S3C2410_DMA_DMASKTRIG (0x20)
#define S3C2412_DMA_DMAREQSEL (0x24)
#define S3C2443_DMA_DMAREQSEL (0x24)
#define S3C2410_DISRCC_INC (1<<0)
#define S3C2410_DISRCC_APB (1<<1)
#define S3C2410_DMASKTRIG_STOP (1<<2)
#define S3C2410_DMASKTRIG_ON (1<<1)
#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
#define S3C2410_DCON_DEMAND (0<<31)
#define S3C2410_DCON_HANDSHAKE (1<<31)
#define S3C2410_DCON_SYNC_PCLK (0<<30)
#define S3C2410_DCON_SYNC_HCLK (1<<30)
#define S3C2410_DCON_INTREQ (1<<29)
#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
#define S3C2410_DCON_CH0_UART0 (1<<24)
#define S3C2410_DCON_CH0_SDI (2<<24)
#define S3C2410_DCON_CH0_TIMER (3<<24)
#define S3C2410_DCON_CH0_USBEP1 (4<<24)
#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
#define S3C2410_DCON_CH1_UART1 (1<<24)
#define S3C2410_DCON_CH1_I2SSDI (2<<24)
#define S3C2410_DCON_CH1_SPI (3<<24)
#define S3C2410_DCON_CH1_USBEP2 (4<<24)
#define S3C2410_DCON_CH2_I2SSDO (0<<24)
#define S3C2410_DCON_CH2_I2SSDI (1<<24)
#define S3C2410_DCON_CH2_SDI (2<<24)
#define S3C2410_DCON_CH2_TIMER (3<<24)
#define S3C2410_DCON_CH2_USBEP3 (4<<24)
#define S3C2410_DCON_CH3_UART2 (0<<24)
#define S3C2410_DCON_CH3_SDI (1<<24)
#define S3C2410_DCON_CH3_SPI (2<<24)
#define S3C2410_DCON_CH3_TIMER (3<<24)
#define S3C2410_DCON_CH3_USBEP4 (4<<24)
#define S3C2410_DCON_SRCSHIFT (24)
#define S3C2410_DCON_SRCMASK (7<<24)
#define S3C2410_DCON_BYTE (0<<20)
#define S3C2410_DCON_HALFWORD (1<<20)
#define S3C2410_DCON_WORD (2<<20)
#define S3C2410_DCON_AUTORELOAD (0<<22)
#define S3C2410_DCON_NORELOAD (1<<22)
#define S3C2410_DCON_HWTRIG (1<<23)
#ifdef CONFIG_CPU_S3C2440
#define S3C2440_DIDSTC_CHKINT (1<<2)
#define S3C2440_DCON_CH0_I2SSDO (5<<24)
#define S3C2440_DCON_CH0_PCMIN (6<<24)
#define S3C2440_DCON_CH1_PCMOUT (5<<24)
#define S3C2440_DCON_CH1_SDI (6<<24)
#define S3C2440_DCON_CH2_PCMIN (5<<24)
#define S3C2440_DCON_CH2_MICIN (6<<24)
#define S3C2440_DCON_CH3_MICIN (5<<24)
#define S3C2440_DCON_CH3_PCMOUT (6<<24)
#endif
#ifdef CONFIG_CPU_S3C2412
#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
#define S3C2412_DMAREQSEL_HW (1)
#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
#endif
#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
#define S3C2443_DMAREQSEL_HW (1)
#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
#endif /* __ASM_ARCH_DMA_H */

View File

@ -24,7 +24,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
{
struct s3c_gpio_chip *chip;
if (pin > S3C2410_GPG10)
if (pin > S3C2410_GPG(10))
return NULL;
chip = &s3c24xx_gpios[pin/32];

View File

@ -0,0 +1,103 @@
/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
*
* Copyright (c) 2003,2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - hardware
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* These functions are in the to-be-removed category and it is strongly
* encouraged not to use these in new code. They will be marked deprecated
* very soon.
*
* Most of the functionality can be either replaced by the gpiocfg calls
* for the s3c platform or by the generic GPIOlib API.
*/
/* external functions for GPIO support
*
* These allow various different clients to access the same GPIO
* registers without conflicting. If your driver only owns the entire
* GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
*/
/* s3c2410_gpio_cfgpin
*
* set the configuration of the given pin to the value passed.
*
* eg:
* s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
* s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
*/
extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
/* s3c2410_gpio_getirq
*
* turn the given pin number into the corresponding IRQ number
*
* returns:
* < 0 = no interrupt for this pin
* >=0 = interrupt number for the pin
*/
extern int s3c2410_gpio_getirq(unsigned int pin);
#ifdef CONFIG_CPU_S3C2400
extern int s3c2400_gpio_getirq(unsigned int pin);
#endif /* CONFIG_CPU_S3C2400 */
/* s3c2410_gpio_irqfilter
*
* set the irq filtering on the given pin
*
* on = 0 => disable filtering
* 1 => enable filtering
*
* config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
* width of filter (0 through 63)
*
*
*/
extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
unsigned int config);
/* s3c2410_gpio_pullup
*
* configure the pull-up control on the given pin
*
* to = 1 => disable the pull-up
* 0 => enable the pull-up
*
* eg;
*
* s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
* s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
*/
extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
/* s3c2410_gpio_getpull
*
* Read the state of the pull-up on a given pin
*
* return:
* < 0 => error code
* 0 => enabled
* 1 => disabled
*/
extern int s3c2410_gpio_getpull(unsigned int pin);
extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
extern unsigned int s3c2410_gpio_getpin(unsigned int pin);

View File

@ -11,6 +11,9 @@
* published by the Free Software Foundation.
*/
#ifndef __MACH_GPIONRS_H
#define __MACH_GPIONRS_H
#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
#define S3C2410_GPIO_BANKA (32*0)
@ -21,3 +24,70 @@
#define S3C2410_GPIO_BANKF (32*5)
#define S3C2410_GPIO_BANKG (32*6)
#define S3C2410_GPIO_BANKH (32*7)
/* GPIO bank sizes */
#define S3C2410_GPIO_A_NR (32)
#define S3C2410_GPIO_B_NR (32)
#define S3C2410_GPIO_C_NR (32)
#define S3C2410_GPIO_D_NR (32)
#define S3C2410_GPIO_E_NR (32)
#define S3C2410_GPIO_F_NR (32)
#define S3C2410_GPIO_G_NR (32)
#define S3C2410_GPIO_H_NR (32)
#if CONFIG_S3C_GPIO_SPACE != 0
#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
#endif
#define S3C2410_GPIO_NEXT(__gpio) \
((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
#ifndef __ASSEMBLY__
enum s3c_gpio_number {
S3C2410_GPIO_A_START = 0,
S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
};
#endif /* __ASSEMBLY__ */
/* S3C2410 GPIO number definitions. */
#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr))
#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr))
#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr))
#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr))
#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr))
#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr))
#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
/* compatibility until drivers can be modified */
#define S3C2410_GPA0 S3C2410_GPA(0)
#define S3C2410_GPA1 S3C2410_GPA(1)
#define S3C2410_GPA3 S3C2410_GPA(3)
#define S3C2410_GPA7 S3C2410_GPA(7)
#define S3C2410_GPE0 S3C2410_GPE(0)
#define S3C2410_GPE1 S3C2410_GPE(1)
#define S3C2410_GPE2 S3C2410_GPE(2)
#define S3C2410_GPE3 S3C2410_GPE(3)
#define S3C2410_GPE4 S3C2410_GPE(4)
#define S3C2410_GPE5 S3C2410_GPE(5)
#define S3C2410_GPE6 S3C2410_GPE(6)
#define S3C2410_GPE7 S3C2410_GPE(7)
#define S3C2410_GPE8 S3C2410_GPE(8)
#define S3C2410_GPE9 S3C2410_GPE(9)
#define S3C2410_GPE10 S3C2410_GPE(10)
#define S3C2410_GPH10 S3C2410_GPH(10)
#endif /* __MACH_GPIONRS_H */

View File

@ -24,5 +24,6 @@
#include <asm-generic/gpio.h>
#include <mach/gpio-nrs.h>
#include <mach/gpio-fns.h>
#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)

View File

@ -15,101 +15,6 @@
#ifndef __ASSEMBLY__
/* external functions for GPIO support
*
* These allow various different clients to access the same GPIO
* registers without conflicting. If your driver only owns the entire
* GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
*/
/* s3c2410_gpio_cfgpin
*
* set the configuration of the given pin to the value passed.
*
* eg:
* s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
* s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
*/
extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
/* s3c2410_gpio_getirq
*
* turn the given pin number into the corresponding IRQ number
*
* returns:
* < 0 = no interrupt for this pin
* >=0 = interrupt number for the pin
*/
extern int s3c2410_gpio_getirq(unsigned int pin);
/* s3c2410_gpio_irq2pin
*
* turn the given irq number into the corresponding GPIO number
*
* returns:
* < 0 = no pin
* >=0 = gpio pin number
*/
extern int s3c2410_gpio_irq2pin(unsigned int irq);
#ifdef CONFIG_CPU_S3C2400
extern int s3c2400_gpio_getirq(unsigned int pin);
#endif /* CONFIG_CPU_S3C2400 */
/* s3c2410_gpio_irqfilter
*
* set the irq filtering on the given pin
*
* on = 0 => disable filtering
* 1 => enable filtering
*
* config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
* width of filter (0 through 63)
*
*
*/
extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
unsigned int config);
/* s3c2410_gpio_pullup
*
* configure the pull-up control on the given pin
*
* to = 1 => disable the pull-up
* 0 => enable the pull-up
*
* eg;
*
* s3c2410_gpio_pullup(S3C2410_GPB0, 0);
* s3c2410_gpio_pullup(S3C2410_GPE8, 0);
*/
extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
/* s3c2410_gpio_getpull
*
* Read the state of the pull-up on a given pin
*
* return:
* < 0 => error code
* 0 => enabled
* 1 => disabled
*/
extern int s3c2410_gpio_getpull(unsigned int pin);
extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
#ifdef CONFIG_CPU_S3C2440

View File

@ -84,7 +84,6 @@
#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST
#define S3C24XX_PA_DMA S3C2410_PA_DMA
#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
#define S3C24XX_PA_LCD S3C2410_PA_LCD
@ -102,6 +101,7 @@
#define S3C_PA_IIC S3C2410_PA_IIC
#define S3C_PA_UART S3C24XX_PA_UART
#define S3C_PA_USBHOST S3C2410_PA_USBHOST
#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC
#endif /* __ASM_ARCH_MAP_H */

View File

@ -69,104 +69,58 @@
#define S3C2400_GPACON S3C2410_GPIOREG(0x00)
#define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
#define S3C2410_GPA0_OUT (0<<0)
#define S3C2410_GPA0_ADDR0 (1<<0)
#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
#define S3C2410_GPA1_OUT (0<<1)
#define S3C2410_GPA1_ADDR16 (1<<1)
#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
#define S3C2410_GPA2_OUT (0<<2)
#define S3C2410_GPA2_ADDR17 (1<<2)
#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
#define S3C2410_GPA3_OUT (0<<3)
#define S3C2410_GPA3_ADDR18 (1<<3)
#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
#define S3C2410_GPA4_OUT (0<<4)
#define S3C2410_GPA4_ADDR19 (1<<4)
#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
#define S3C2410_GPA5_OUT (0<<5)
#define S3C2410_GPA5_ADDR20 (1<<5)
#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
#define S3C2410_GPA6_OUT (0<<6)
#define S3C2410_GPA6_ADDR21 (1<<6)
#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
#define S3C2410_GPA7_OUT (0<<7)
#define S3C2410_GPA7_ADDR22 (1<<7)
#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
#define S3C2410_GPA8_OUT (0<<8)
#define S3C2410_GPA8_ADDR23 (1<<8)
#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
#define S3C2410_GPA9_OUT (0<<9)
#define S3C2410_GPA9_ADDR24 (1<<9)
#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
#define S3C2410_GPA10_OUT (0<<10)
#define S3C2410_GPA10_ADDR25 (1<<10)
#define S3C2400_GPA10_SCKE (1<<10)
#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
#define S3C2410_GPA11_OUT (0<<11)
#define S3C2410_GPA11_ADDR26 (1<<11)
#define S3C2400_GPA11_nCAS0 (1<<11)
#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
#define S3C2410_GPA12_OUT (0<<12)
#define S3C2410_GPA12_nGCS1 (1<<12)
#define S3C2400_GPA12_nCAS1 (1<<12)
#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
#define S3C2410_GPA13_OUT (0<<13)
#define S3C2410_GPA13_nGCS2 (1<<13)
#define S3C2400_GPA13_nGCS1 (1<<13)
#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
#define S3C2410_GPA14_OUT (0<<14)
#define S3C2410_GPA14_nGCS3 (1<<14)
#define S3C2400_GPA14_nGCS2 (1<<14)
#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
#define S3C2410_GPA15_OUT (0<<15)
#define S3C2410_GPA15_nGCS4 (1<<15)
#define S3C2400_GPA15_nGCS3 (1<<15)
#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
#define S3C2410_GPA16_OUT (0<<16)
#define S3C2410_GPA16_nGCS5 (1<<16)
#define S3C2400_GPA16_nGCS4 (1<<16)
#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
#define S3C2410_GPA17_OUT (0<<17)
#define S3C2410_GPA17_CLE (1<<17)
#define S3C2400_GPA17_nGCS5 (1<<17)
#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
#define S3C2410_GPA18_OUT (0<<18)
#define S3C2410_GPA18_ALE (1<<18)
#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
#define S3C2410_GPA19_OUT (0<<19)
#define S3C2410_GPA19_nFWE (1<<19)
#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
#define S3C2410_GPA20_OUT (0<<20)
#define S3C2410_GPA20_nFRE (1<<20)
#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
#define S3C2410_GPA21_OUT (0<<21)
#define S3C2410_GPA21_nRSTOUT (1<<21)
#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
#define S3C2410_GPA22_OUT (0<<22)
#define S3C2410_GPA22_nFCE (1<<22)
/* 0x08 and 0x0c are reserved on S3C2410 */
@ -194,107 +148,69 @@
/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
#define S3C2410_GPB0_INP (0x00 << 0)
#define S3C2410_GPB0_OUTP (0x01 << 0)
#define S3C2410_GPB0_TOUT0 (0x02 << 0)
#define S3C2400_GPB0_DATA16 (0x02 << 0)
#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
#define S3C2410_GPB1_INP (0x00 << 2)
#define S3C2410_GPB1_OUTP (0x01 << 2)
#define S3C2410_GPB1_TOUT1 (0x02 << 2)
#define S3C2400_GPB1_DATA17 (0x02 << 2)
#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
#define S3C2410_GPB2_INP (0x00 << 4)
#define S3C2410_GPB2_OUTP (0x01 << 4)
#define S3C2410_GPB2_TOUT2 (0x02 << 4)
#define S3C2400_GPB2_DATA18 (0x02 << 4)
#define S3C2400_GPB2_TCLK1 (0x03 << 4)
#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
#define S3C2410_GPB3_INP (0x00 << 6)
#define S3C2410_GPB3_OUTP (0x01 << 6)
#define S3C2410_GPB3_TOUT3 (0x02 << 6)
#define S3C2400_GPB3_DATA19 (0x02 << 6)
#define S3C2400_GPB3_TXD1 (0x03 << 6)
#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
#define S3C2410_GPB4_INP (0x00 << 8)
#define S3C2410_GPB4_OUTP (0x01 << 8)
#define S3C2410_GPB4_TCLK0 (0x02 << 8)
#define S3C2400_GPB4_DATA20 (0x02 << 8)
#define S3C2410_GPB4_MASK (0x03 << 8)
#define S3C2400_GPB4_RXD1 (0x03 << 8)
#define S3C2400_GPB4_MASK (0x03 << 8)
#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
#define S3C2410_GPB5_INP (0x00 << 10)
#define S3C2410_GPB5_OUTP (0x01 << 10)
#define S3C2410_GPB5_nXBACK (0x02 << 10)
#define S3C2443_GPB5_XBACK (0x03 << 10)
#define S3C2400_GPB5_DATA21 (0x02 << 10)
#define S3C2400_GPB5_nCTS1 (0x03 << 10)
#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
#define S3C2410_GPB6_INP (0x00 << 12)
#define S3C2410_GPB6_OUTP (0x01 << 12)
#define S3C2410_GPB6_nXBREQ (0x02 << 12)
#define S3C2443_GPB6_XBREQ (0x03 << 12)
#define S3C2400_GPB6_DATA22 (0x02 << 12)
#define S3C2400_GPB6_nRTS1 (0x03 << 12)
#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
#define S3C2410_GPB7_INP (0x00 << 14)
#define S3C2410_GPB7_OUTP (0x01 << 14)
#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
#define S3C2443_GPB7_XDACK1 (0x03 << 14)
#define S3C2400_GPB7_DATA23 (0x02 << 14)
#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
#define S3C2410_GPB8_INP (0x00 << 16)
#define S3C2410_GPB8_OUTP (0x01 << 16)
#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
#define S3C2400_GPB8_DATA24 (0x02 << 16)
#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
#define S3C2410_GPB9_INP (0x00 << 18)
#define S3C2410_GPB9_OUTP (0x01 << 18)
#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
#define S3C2443_GPB9_XDACK0 (0x03 << 18)
#define S3C2400_GPB9_DATA25 (0x02 << 18)
#define S3C2400_GPB9_I2SSDI (0x03 << 18)
#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
#define S3C2410_GPB10_INP (0x00 << 20)
#define S3C2410_GPB10_OUTP (0x01 << 20)
#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
#define S3C2400_GPB10_DATA26 (0x02 << 20)
#define S3C2400_GPB10_nSS (0x03 << 20)
#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
#define S3C2400_GPB11_INP (0x00 << 22)
#define S3C2400_GPB11_OUTP (0x01 << 22)
#define S3C2400_GPB11_DATA27 (0x02 << 22)
#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
#define S3C2400_GPB12_INP (0x00 << 24)
#define S3C2400_GPB12_OUTP (0x01 << 24)
#define S3C2400_GPB12_DATA28 (0x02 << 24)
#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
#define S3C2400_GPB13_INP (0x00 << 26)
#define S3C2400_GPB13_OUTP (0x01 << 26)
#define S3C2400_GPB13_DATA29 (0x02 << 26)
#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
#define S3C2400_GPB14_INP (0x00 << 28)
#define S3C2400_GPB14_OUTP (0x01 << 28)
#define S3C2400_GPB14_DATA30 (0x02 << 28)
#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
#define S3C2400_GPB15_INP (0x00 << 30)
#define S3C2400_GPB15_OUTP (0x01 << 30)
#define S3C2400_GPB15_DATA31 (0x02 << 30)
@ -315,99 +231,51 @@
#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
#define S3C2410_GPC0_INP (0x00 << 0)
#define S3C2410_GPC0_OUTP (0x01 << 0)
#define S3C2410_GPC0_LEND (0x02 << 0)
#define S3C2400_GPC0_VD0 (0x02 << 0)
#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
#define S3C2410_GPC1_INP (0x00 << 2)
#define S3C2410_GPC1_OUTP (0x01 << 2)
#define S3C2410_GPC1_VCLK (0x02 << 2)
#define S3C2400_GPC1_VD1 (0x02 << 2)
#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
#define S3C2410_GPC2_INP (0x00 << 4)
#define S3C2410_GPC2_OUTP (0x01 << 4)
#define S3C2410_GPC2_VLINE (0x02 << 4)
#define S3C2400_GPC2_VD2 (0x02 << 4)
#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
#define S3C2410_GPC3_INP (0x00 << 6)
#define S3C2410_GPC3_OUTP (0x01 << 6)
#define S3C2410_GPC3_VFRAME (0x02 << 6)
#define S3C2400_GPC3_VD3 (0x02 << 6)
#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
#define S3C2410_GPC4_INP (0x00 << 8)
#define S3C2410_GPC4_OUTP (0x01 << 8)
#define S3C2410_GPC4_VM (0x02 << 8)
#define S3C2400_GPC4_VD4 (0x02 << 8)
#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
#define S3C2410_GPC5_INP (0x00 << 10)
#define S3C2410_GPC5_OUTP (0x01 << 10)
#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
#define S3C2400_GPC5_VD5 (0x02 << 10)
#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
#define S3C2410_GPC6_INP (0x00 << 12)
#define S3C2410_GPC6_OUTP (0x01 << 12)
#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
#define S3C2400_GPC6_VD6 (0x02 << 12)
#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
#define S3C2410_GPC7_INP (0x00 << 14)
#define S3C2410_GPC7_OUTP (0x01 << 14)
#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
#define S3C2400_GPC7_VD7 (0x02 << 14)
#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
#define S3C2410_GPC8_INP (0x00 << 16)
#define S3C2410_GPC8_OUTP (0x01 << 16)
#define S3C2410_GPC8_VD0 (0x02 << 16)
#define S3C2400_GPC8_VD8 (0x02 << 16)
#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
#define S3C2410_GPC9_INP (0x00 << 18)
#define S3C2410_GPC9_OUTP (0x01 << 18)
#define S3C2410_GPC9_VD1 (0x02 << 18)
#define S3C2400_GPC9_VD9 (0x02 << 18)
#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
#define S3C2410_GPC10_INP (0x00 << 20)
#define S3C2410_GPC10_OUTP (0x01 << 20)
#define S3C2410_GPC10_VD2 (0x02 << 20)
#define S3C2400_GPC10_VD10 (0x02 << 20)
#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
#define S3C2410_GPC11_INP (0x00 << 22)
#define S3C2410_GPC11_OUTP (0x01 << 22)
#define S3C2410_GPC11_VD3 (0x02 << 22)
#define S3C2400_GPC11_VD11 (0x02 << 22)
#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
#define S3C2410_GPC12_INP (0x00 << 24)
#define S3C2410_GPC12_OUTP (0x01 << 24)
#define S3C2410_GPC12_VD4 (0x02 << 24)
#define S3C2400_GPC12_VD12 (0x02 << 24)
#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
#define S3C2410_GPC13_INP (0x00 << 26)
#define S3C2410_GPC13_OUTP (0x01 << 26)
#define S3C2410_GPC13_VD5 (0x02 << 26)
#define S3C2400_GPC13_VD13 (0x02 << 26)
#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
#define S3C2410_GPC14_INP (0x00 << 28)
#define S3C2410_GPC14_OUTP (0x01 << 28)
#define S3C2410_GPC14_VD6 (0x02 << 28)
#define S3C2400_GPC14_VD14 (0x02 << 28)
#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
#define S3C2410_GPC15_INP (0x00 << 30)
#define S3C2410_GPC15_OUTP (0x01 << 30)
#define S3C2410_GPC15_VD7 (0x02 << 30)
#define S3C2400_GPC15_VD15 (0x02 << 30)
@ -432,99 +300,51 @@
#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
#define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
#define S3C2410_GPD0_INP (0x00 << 0)
#define S3C2410_GPD0_OUTP (0x01 << 0)
#define S3C2410_GPD0_VD8 (0x02 << 0)
#define S3C2400_GPD0_VFRAME (0x02 << 0)
#define S3C2442_GPD0_nSPICS1 (0x03 << 0)
#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
#define S3C2410_GPD1_INP (0x00 << 2)
#define S3C2410_GPD1_OUTP (0x01 << 2)
#define S3C2410_GPD1_VD9 (0x02 << 2)
#define S3C2400_GPD1_VM (0x02 << 2)
#define S3C2442_GPD1_SPICLK1 (0x03 << 2)
#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
#define S3C2410_GPD2_INP (0x00 << 4)
#define S3C2410_GPD2_OUTP (0x01 << 4)
#define S3C2410_GPD2_VD10 (0x02 << 4)
#define S3C2400_GPD2_VLINE (0x02 << 4)
#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
#define S3C2410_GPD3_INP (0x00 << 6)
#define S3C2410_GPD3_OUTP (0x01 << 6)
#define S3C2410_GPD3_VD11 (0x02 << 6)
#define S3C2400_GPD3_VCLK (0x02 << 6)
#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
#define S3C2410_GPD4_INP (0x00 << 8)
#define S3C2410_GPD4_OUTP (0x01 << 8)
#define S3C2410_GPD4_VD12 (0x02 << 8)
#define S3C2400_GPD4_LEND (0x02 << 8)
#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
#define S3C2410_GPD5_INP (0x00 << 10)
#define S3C2410_GPD5_OUTP (0x01 << 10)
#define S3C2410_GPD5_VD13 (0x02 << 10)
#define S3C2400_GPD5_TOUT0 (0x02 << 10)
#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
#define S3C2410_GPD6_INP (0x00 << 12)
#define S3C2410_GPD6_OUTP (0x01 << 12)
#define S3C2410_GPD6_VD14 (0x02 << 12)
#define S3C2400_GPD6_TOUT1 (0x02 << 12)
#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
#define S3C2410_GPD7_INP (0x00 << 14)
#define S3C2410_GPD7_OUTP (0x01 << 14)
#define S3C2410_GPD7_VD15 (0x02 << 14)
#define S3C2400_GPD7_TOUT2 (0x02 << 14)
#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
#define S3C2410_GPD8_INP (0x00 << 16)
#define S3C2410_GPD8_OUTP (0x01 << 16)
#define S3C2410_GPD8_VD16 (0x02 << 16)
#define S3C2400_GPD8_TOUT3 (0x02 << 16)
#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
#define S3C2410_GPD9_INP (0x00 << 18)
#define S3C2410_GPD9_OUTP (0x01 << 18)
#define S3C2410_GPD9_VD17 (0x02 << 18)
#define S3C2400_GPD9_TCLK0 (0x02 << 18)
#define S3C2410_GPD9_MASK (0x03 << 18)
#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
#define S3C2410_GPD10_INP (0x00 << 20)
#define S3C2410_GPD10_OUTP (0x01 << 20)
#define S3C2410_GPD10_VD18 (0x02 << 20)
#define S3C2400_GPD10_nWAIT (0x02 << 20)
#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
#define S3C2410_GPD11_INP (0x00 << 22)
#define S3C2410_GPD11_OUTP (0x01 << 22)
#define S3C2410_GPD11_VD19 (0x02 << 22)
#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
#define S3C2410_GPD12_INP (0x00 << 24)
#define S3C2410_GPD12_OUTP (0x01 << 24)
#define S3C2410_GPD12_VD20 (0x02 << 24)
#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
#define S3C2410_GPD13_INP (0x00 << 26)
#define S3C2410_GPD13_OUTP (0x01 << 26)
#define S3C2410_GPD13_VD21 (0x02 << 26)
#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
#define S3C2410_GPD14_INP (0x00 << 28)
#define S3C2410_GPD14_OUTP (0x01 << 28)
#define S3C2410_GPD14_VD22 (0x02 << 28)
#define S3C2410_GPD14_nSS1 (0x03 << 28)
#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
#define S3C2410_GPD15_INP (0x00 << 30)
#define S3C2410_GPD15_OUTP (0x01 << 30)
#define S3C2410_GPD15_VD23 (0x02 << 30)
#define S3C2410_GPD15_nSS0 (0x03 << 30)
@ -550,34 +370,22 @@
#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
#define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
#define S3C2410_GPE0_INP (0x00 << 0)
#define S3C2410_GPE0_OUTP (0x01 << 0)
#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
#define S3C2400_GPE0_EINT0 (0x02 << 0)
#define S3C2410_GPE0_MASK (0x03 << 0)
#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
#define S3C2410_GPE1_INP (0x00 << 2)
#define S3C2410_GPE1_OUTP (0x01 << 2)
#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
#define S3C2400_GPE1_EINT1 (0x02 << 2)
#define S3C2400_GPE1_nSS (0x03 << 2)
#define S3C2410_GPE1_MASK (0x03 << 2)
#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
#define S3C2410_GPE2_INP (0x00 << 4)
#define S3C2410_GPE2_OUTP (0x01 << 4)
#define S3C2410_GPE2_CDCLK (0x02 << 4)
#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
#define S3C2400_GPE2_EINT2 (0x02 << 4)
#define S3C2400_GPE2_I2SSDI (0x03 << 4)
#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
#define S3C2410_GPE3_INP (0x00 << 6)
#define S3C2410_GPE3_OUTP (0x01 << 6)
#define S3C2410_GPE3_I2SSDI (0x02 << 6)
#define S3C2443_GPE3_AC_SDI (0x03 << 6)
#define S3C2400_GPE3_EINT3 (0x02 << 6)
@ -585,9 +393,6 @@
#define S3C2410_GPE3_nSS0 (0x03 << 6)
#define S3C2410_GPE3_MASK (0x03 << 6)
#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
#define S3C2410_GPE4_INP (0x00 << 8)
#define S3C2410_GPE4_OUTP (0x01 << 8)
#define S3C2410_GPE4_I2SSDO (0x02 << 8)
#define S3C2443_GPE4_AC_SDO (0x03 << 8)
#define S3C2400_GPE4_EINT4 (0x02 << 8)
@ -595,81 +400,48 @@
#define S3C2410_GPE4_I2SSDI (0x03 << 8)
#define S3C2410_GPE4_MASK (0x03 << 8)
#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
#define S3C2410_GPE5_INP (0x00 << 10)
#define S3C2410_GPE5_OUTP (0x01 << 10)
#define S3C2410_GPE5_SDCLK (0x02 << 10)
#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
#define S3C2400_GPE5_EINT5 (0x02 << 10)
#define S3C2400_GPE5_TCLK1 (0x03 << 10)
#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
#define S3C2410_GPE6_INP (0x00 << 12)
#define S3C2410_GPE6_OUTP (0x01 << 12)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
#define S3C2400_GPE6_EINT6 (0x02 << 12)
#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
#define S3C2410_GPE7_INP (0x00 << 14)
#define S3C2410_GPE7_OUTP (0x01 << 14)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
#define S3C2443_GPE7_AC_SDI (0x03 << 14)
#define S3C2400_GPE7_EINT7 (0x02 << 14)
#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
#define S3C2410_GPE8_INP (0x00 << 16)
#define S3C2410_GPE8_OUTP (0x01 << 16)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
#define S3C2443_GPE8_AC_SDO (0x03 << 16)
#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
#define S3C2410_GPE9_INP (0x00 << 18)
#define S3C2410_GPE9_OUTP (0x01 << 18)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
#define S3C2443_GPE9_AC_SYNC (0x03 << 18)
#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
#define S3C2400_GPE9_nXBACK (0x03 << 18)
#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
#define S3C2410_GPE10_INP (0x00 << 20)
#define S3C2410_GPE10_OUTP (0x01 << 20)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
#define S3C2410_GPE11_INP (0x00 << 22)
#define S3C2410_GPE11_OUTP (0x01 << 22)
#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
#define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
#define S3C2400_GPE11_nXBREQ (0x03 << 22)
#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
#define S3C2410_GPE12_INP (0x00 << 24)
#define S3C2410_GPE12_OUTP (0x01 << 24)
#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
#define S3C2410_GPE13_INP (0x00 << 26)
#define S3C2410_GPE13_OUTP (0x01 << 26)
#define S3C2410_GPE13_SPICLK0 (0x02 << 26)
#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
#define S3C2410_GPE14_INP (0x00 << 28)
#define S3C2410_GPE14_OUTP (0x01 << 28)
#define S3C2410_GPE14_IICSCL (0x02 << 28)
#define S3C2410_GPE14_MASK (0x03 << 28)
#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
#define S3C2410_GPE15_INP (0x00 << 30)
#define S3C2410_GPE15_OUTP (0x01 << 30)
#define S3C2410_GPE15_IICSDA (0x02 << 30)
#define S3C2410_GPE15_MASK (0x03 << 30)
@ -705,55 +477,31 @@
#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
#define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
#define S3C2410_GPF0_INP (0x00 << 0)
#define S3C2410_GPF0_OUTP (0x01 << 0)
#define S3C2410_GPF0_EINT0 (0x02 << 0)
#define S3C2400_GPF0_RXD0 (0x02 << 0)
#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
#define S3C2410_GPF1_INP (0x00 << 2)
#define S3C2410_GPF1_OUTP (0x01 << 2)
#define S3C2410_GPF1_EINT1 (0x02 << 2)
#define S3C2400_GPF1_RXD1 (0x02 << 2)
#define S3C2400_GPF1_IICSDA (0x03 << 2)
#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
#define S3C2410_GPF2_INP (0x00 << 4)
#define S3C2410_GPF2_OUTP (0x01 << 4)
#define S3C2410_GPF2_EINT2 (0x02 << 4)
#define S3C2400_GPF2_TXD0 (0x02 << 4)
#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
#define S3C2410_GPF3_INP (0x00 << 6)
#define S3C2410_GPF3_OUTP (0x01 << 6)
#define S3C2410_GPF3_EINT3 (0x02 << 6)
#define S3C2400_GPF3_TXD1 (0x02 << 6)
#define S3C2400_GPF3_IICSCL (0x03 << 6)
#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
#define S3C2410_GPF4_INP (0x00 << 8)
#define S3C2410_GPF4_OUTP (0x01 << 8)
#define S3C2410_GPF4_EINT4 (0x02 << 8)
#define S3C2400_GPF4_nRTS0 (0x02 << 8)
#define S3C2400_GPF4_nXBACK (0x03 << 8)
#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
#define S3C2410_GPF5_INP (0x00 << 10)
#define S3C2410_GPF5_OUTP (0x01 << 10)
#define S3C2410_GPF5_EINT5 (0x02 << 10)
#define S3C2400_GPF5_nCTS0 (0x02 << 10)
#define S3C2400_GPF5_nXBREQ (0x03 << 10)
#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
#define S3C2410_GPF6_INP (0x00 << 12)
#define S3C2410_GPF6_OUTP (0x01 << 12)
#define S3C2410_GPF6_EINT6 (0x02 << 12)
#define S3C2400_GPF6_CLKOUT (0x02 << 12)
#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
#define S3C2410_GPF7_INP (0x00 << 14)
#define S3C2410_GPF7_OUTP (0x01 << 14)
#define S3C2410_GPF7_EINT7 (0x02 << 14)
#define S3C2410_GPF_PUPDIS(x) (1<<(x))
@ -778,117 +526,69 @@
#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
#define S3C2410_GPG0_INP (0x00 << 0)
#define S3C2410_GPG0_OUTP (0x01 << 0)
#define S3C2410_GPG0_EINT8 (0x02 << 0)
#define S3C2400_GPG0_I2SLRCK (0x02 << 0)
#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
#define S3C2410_GPG1_INP (0x00 << 2)
#define S3C2410_GPG1_OUTP (0x01 << 2)
#define S3C2410_GPG1_EINT9 (0x02 << 2)
#define S3C2400_GPG1_I2SSCLK (0x02 << 2)
#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
#define S3C2410_GPG2_INP (0x00 << 4)
#define S3C2410_GPG2_OUTP (0x01 << 4)
#define S3C2410_GPG2_EINT10 (0x02 << 4)
#define S3C2410_GPG2_nSS0 (0x03 << 4)
#define S3C2400_GPG2_CDCLK (0x02 << 4)
#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
#define S3C2410_GPG3_INP (0x00 << 6)
#define S3C2410_GPG3_OUTP (0x01 << 6)
#define S3C2410_GPG3_EINT11 (0x02 << 6)
#define S3C2410_GPG3_nSS1 (0x03 << 6)
#define S3C2400_GPG3_I2SSDO (0x02 << 6)
#define S3C2400_GPG3_I2SSDI (0x03 << 6)
#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
#define S3C2410_GPG4_INP (0x00 << 8)
#define S3C2410_GPG4_OUTP (0x01 << 8)
#define S3C2410_GPG4_EINT12 (0x02 << 8)
#define S3C2400_GPG4_MMCCLK (0x02 << 8)
#define S3C2400_GPG4_I2SSDI (0x03 << 8)
#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
#define S3C2410_GPG5_INP (0x00 << 10)
#define S3C2410_GPG5_OUTP (0x01 << 10)
#define S3C2410_GPG5_EINT13 (0x02 << 10)
#define S3C2400_GPG5_MMCCMD (0x02 << 10)
#define S3C2400_GPG5_IICSDA (0x03 << 10)
#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
#define S3C2410_GPG6_INP (0x00 << 12)
#define S3C2410_GPG6_OUTP (0x01 << 12)
#define S3C2410_GPG6_EINT14 (0x02 << 12)
#define S3C2400_GPG6_MMCDAT (0x02 << 12)
#define S3C2400_GPG6_IICSCL (0x03 << 12)
#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
#define S3C2410_GPG7_INP (0x00 << 14)
#define S3C2410_GPG7_OUTP (0x01 << 14)
#define S3C2410_GPG7_EINT15 (0x02 << 14)
#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
#define S3C2400_GPG7_SPIMISO (0x02 << 14)
#define S3C2400_GPG7_IICSDA (0x03 << 14)
#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
#define S3C2410_GPG8_INP (0x00 << 16)
#define S3C2410_GPG8_OUTP (0x01 << 16)
#define S3C2410_GPG8_EINT16 (0x02 << 16)
#define S3C2400_GPG8_SPIMOSI (0x02 << 16)
#define S3C2400_GPG8_IICSCL (0x03 << 16)
#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
#define S3C2410_GPG9_INP (0x00 << 18)
#define S3C2410_GPG9_OUTP (0x01 << 18)
#define S3C2410_GPG9_EINT17 (0x02 << 18)
#define S3C2400_GPG9_SPICLK (0x02 << 18)
#define S3C2400_GPG9_MMCCLK (0x03 << 18)
#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
#define S3C2410_GPG10_INP (0x00 << 20)
#define S3C2410_GPG10_OUTP (0x01 << 20)
#define S3C2410_GPG10_EINT18 (0x02 << 20)
#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
#define S3C2410_GPG11_INP (0x00 << 22)
#define S3C2410_GPG11_OUTP (0x01 << 22)
#define S3C2410_GPG11_EINT19 (0x02 << 22)
#define S3C2410_GPG11_TCLK1 (0x03 << 22)
#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
#define S3C2410_GPG12_INP (0x00 << 24)
#define S3C2410_GPG12_OUTP (0x01 << 24)
#define S3C2410_GPG12_EINT20 (0x02 << 24)
#define S3C2410_GPG12_XMON (0x03 << 24)
#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
#define S3C2443_GPG12_nINPACK (0x03 << 24)
#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
#define S3C2410_GPG13_INP (0x00 << 26)
#define S3C2410_GPG13_OUTP (0x01 << 26)
#define S3C2410_GPG13_EINT21 (0x02 << 26)
#define S3C2410_GPG13_nXPON (0x03 << 26)
#define S3C2443_GPG13_CF_nREG (0x03 << 26)
#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
#define S3C2410_GPG14_INP (0x00 << 28)
#define S3C2410_GPG14_OUTP (0x01 << 28)
#define S3C2410_GPG14_EINT22 (0x02 << 28)
#define S3C2410_GPG14_YMON (0x03 << 28)
#define S3C2443_GPG14_CF_RESET (0x03 << 28)
#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
#define S3C2410_GPG15_INP (0x00 << 30)
#define S3C2410_GPG15_OUTP (0x01 << 30)
#define S3C2410_GPG15_EINT23 (0x02 << 30)
#define S3C2410_GPG15_nYPON (0x03 << 30)
#define S3C2443_GPG15_CF_PWR (0x03 << 30)
@ -907,62 +607,29 @@
#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74)
#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
#define S3C2410_GPH0_INP (0x00 << 0)
#define S3C2410_GPH0_OUTP (0x01 << 0)
#define S3C2410_GPH0_nCTS0 (0x02 << 0)
#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
#define S3C2410_GPH1_INP (0x00 << 2)
#define S3C2410_GPH1_OUTP (0x01 << 2)
#define S3C2410_GPH1_nRTS0 (0x02 << 2)
#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
#define S3C2410_GPH2_INP (0x00 << 4)
#define S3C2410_GPH2_OUTP (0x01 << 4)
#define S3C2410_GPH2_TXD0 (0x02 << 4)
#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
#define S3C2410_GPH3_INP (0x00 << 6)
#define S3C2410_GPH3_OUTP (0x01 << 6)
#define S3C2410_GPH3_RXD0 (0x02 << 6)
#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
#define S3C2410_GPH4_INP (0x00 << 8)
#define S3C2410_GPH4_OUTP (0x01 << 8)
#define S3C2410_GPH4_TXD1 (0x02 << 8)
#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
#define S3C2410_GPH5_INP (0x00 << 10)
#define S3C2410_GPH5_OUTP (0x01 << 10)
#define S3C2410_GPH5_RXD1 (0x02 << 10)
#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
#define S3C2410_GPH6_INP (0x00 << 12)
#define S3C2410_GPH6_OUTP (0x01 << 12)
#define S3C2410_GPH6_TXD2 (0x02 << 12)
#define S3C2410_GPH6_nRTS1 (0x03 << 12)
#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
#define S3C2410_GPH7_INP (0x00 << 14)
#define S3C2410_GPH7_OUTP (0x01 << 14)
#define S3C2410_GPH7_RXD2 (0x02 << 14)
#define S3C2410_GPH7_nCTS1 (0x03 << 14)
#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
#define S3C2410_GPH8_INP (0x00 << 16)
#define S3C2410_GPH8_OUTP (0x01 << 16)
#define S3C2410_GPH8_UCLK (0x02 << 16)
#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
#define S3C2410_GPH9_INP (0x00 << 18)
#define S3C2410_GPH9_OUTP (0x01 << 18)
#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
#define S3C2442_GPH9_nSPICS0 (0x03 << 18)
#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
#define S3C2410_GPH10_INP (0x00 << 20)
#define S3C2410_GPH10_OUTP (0x01 << 20)
#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
/* The S3C2412 and S3C2413 move the GPJ register set to after

View File

@ -11,21 +11,13 @@
*/
#include <mach/hardware.h>
#include <linux/io.h>
#include <plat/regs-watchdog.h>
#include <mach/regs-clock.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <plat/watchdog-reset.h>
extern void (*s3c24xx_reset_hook)(void);
static void
arch_reset(char mode, const char *cmd)
{
struct clk *wdtclk;
if (mode == 's') {
cpu_reset(0);
}
@ -33,31 +25,7 @@ arch_reset(char mode, const char *cmd)
if (s3c24xx_reset_hook)
s3c24xx_reset_hook();
printk("arch_reset: attempting watchdog reset\n");
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
wdtclk = clk_get(NULL, "watchdog");
if (!IS_ERR(wdtclk)) {
clk_enable(wdtclk);
} else
printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
/* put initial values into count and data */
__raw_writel(0x80, S3C2410_WTCNT);
__raw_writel(0x80, S3C2410_WTDAT);
/* set the watchdog to go and reset... */
__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
/* wait for reset to assert... */
mdelay(500);
printk(KERN_ERR "Watchdog reset failed to assert reset\n");
/* delay to allow the serial port to show the message */
mdelay(50);
arch_wdt_reset();
/* we'll take a jump through zero as a poor second */
cpu_reset(0);

View File

@ -32,6 +32,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
@ -224,8 +225,8 @@ static void amlm5900_init_pm(void)
} else {
enable_irq_wake(IRQ_EINT9);
/* configure the suspend/resume status pin */
s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
s3c2410_gpio_pullup(S3C2410_GPF2, 0);
s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
}
}
static void __init amlm5900_init(void)

View File

@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@ -212,15 +213,15 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
{
/* ensure that an nRESET is not generated on resume. */
s3c2410_gpio_setpin(S3C2410_GPA21, 1);
s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
return 0;
}
static int bast_pm_resume(struct sys_device *sd)
{
s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
return 0;
}
@ -591,8 +592,6 @@ static void __init bast_map_io(void)
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
usb_simtec_init();
}
static void __init bast_init(void)
@ -607,6 +606,7 @@ static void __init bast_init(void)
i2c_register_board_info(0, bast_i2c_devs,
ARRAY_SIZE(bast_i2c_devs));
usb_simtec_init();
nor_simtec_init();
}

View File

@ -127,7 +127,7 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
.udc_command = h1940_udc_pullup,
.vbus_pin = S3C2410_GPG5,
.vbus_pin = S3C2410_GPG(5),
.vbus_pin_inverted = 1,
};

View File

@ -19,6 +19,7 @@
#include <linux/gpio_keys.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
@ -85,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
{
switch (cmd) {
case S3C2410_UDC_P_ENABLE :
s3c2410_gpio_setpin(S3C2410_GPB3, 1);
s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
break;
case S3C2410_UDC_P_DISABLE :
s3c2410_gpio_setpin(S3C2410_GPB3, 0);
s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
break;
case S3C2410_UDC_P_RESET :
break;
@ -99,55 +100,55 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
.udc_command = n30_udc_pullup,
.vbus_pin = S3C2410_GPG1,
.vbus_pin = S3C2410_GPG(1),
.vbus_pin_inverted = 0,
};
static struct gpio_keys_button n30_buttons[] = {
{
.gpio = S3C2410_GPF0,
.gpio = S3C2410_GPF(0),
.code = KEY_POWER,
.desc = "Power",
.active_low = 0,
},
{
.gpio = S3C2410_GPG9,
.gpio = S3C2410_GPG(9),
.code = KEY_UP,
.desc = "Thumbwheel Up",
.active_low = 0,
},
{
.gpio = S3C2410_GPG8,
.gpio = S3C2410_GPG(8),
.code = KEY_DOWN,
.desc = "Thumbwheel Down",
.active_low = 0,
},
{
.gpio = S3C2410_GPG7,
.gpio = S3C2410_GPG(7),
.code = KEY_ENTER,
.desc = "Thumbwheel Press",
.active_low = 0,
},
{
.gpio = S3C2410_GPF7,
.gpio = S3C2410_GPF(7),
.code = KEY_HOMEPAGE,
.desc = "Home",
.active_low = 0,
},
{
.gpio = S3C2410_GPF6,
.gpio = S3C2410_GPF(6),
.code = KEY_CALENDAR,
.desc = "Calendar",
.active_low = 0,
},
{
.gpio = S3C2410_GPF5,
.gpio = S3C2410_GPF(5),
.code = KEY_ADDRESSBOOK,
.desc = "Contacts",
.active_low = 0,
},
{
.gpio = S3C2410_GPF4,
.gpio = S3C2410_GPF(4),
.code = KEY_MAIL,
.desc = "Mail",
.active_low = 0,
@ -169,73 +170,73 @@ static struct platform_device n30_button_device = {
static struct gpio_keys_button n35_buttons[] = {
{
.gpio = S3C2410_GPF0,
.gpio = S3C2410_GPF(0),
.code = KEY_POWER,
.desc = "Power",
.active_low = 0,
},
{
.gpio = S3C2410_GPG9,
.gpio = S3C2410_GPG(9),
.code = KEY_UP,
.desc = "Joystick Up",
.active_low = 0,
},
{
.gpio = S3C2410_GPG8,
.gpio = S3C2410_GPG(8),
.code = KEY_DOWN,
.desc = "Joystick Down",
.active_low = 0,
},
{
.gpio = S3C2410_GPG6,
.gpio = S3C2410_GPG(6),
.code = KEY_DOWN,
.desc = "Joystick Left",
.active_low = 0,
},
{
.gpio = S3C2410_GPG5,
.gpio = S3C2410_GPG(5),
.code = KEY_DOWN,
.desc = "Joystick Right",
.active_low = 0,
},
{
.gpio = S3C2410_GPG7,
.gpio = S3C2410_GPG(7),
.code = KEY_ENTER,
.desc = "Joystick Press",
.active_low = 0,
},
{
.gpio = S3C2410_GPF7,
.gpio = S3C2410_GPF(7),
.code = KEY_HOMEPAGE,
.desc = "Home",
.active_low = 0,
},
{
.gpio = S3C2410_GPF6,
.gpio = S3C2410_GPF(6),
.code = KEY_CALENDAR,
.desc = "Calendar",
.active_low = 0,
},
{
.gpio = S3C2410_GPF5,
.gpio = S3C2410_GPF(5),
.code = KEY_ADDRESSBOOK,
.desc = "Contacts",
.active_low = 0,
},
{
.gpio = S3C2410_GPF4,
.gpio = S3C2410_GPF(4),
.code = KEY_MAIL,
.desc = "Mail",
.active_low = 0,
},
{
.gpio = S3C2410_GPF3,
.gpio = S3C2410_GPF(3),
.code = SW_RADIO,
.desc = "GPS Antenna",
.active_low = 0,
},
{
.gpio = S3C2410_GPG2,
.gpio = S3C2410_GPG(2),
.code = SW_HEADPHONE_INSERT,
.desc = "Headphone",
.active_low = 0,
@ -259,7 +260,7 @@ static struct platform_device n35_button_device = {
/* This is the bluetooth LED on the device. */
static struct s3c24xx_led_platdata n30_blue_led_pdata = {
.name = "blue_led",
.gpio = S3C2410_GPG6,
.gpio = S3C2410_GPG(6),
.def_trigger = "",
};
@ -270,7 +271,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
static struct s3c24xx_led_platdata n30_warning_led_pdata = {
.name = "warning_led",
.flags = S3C24XX_LEDF_ACTLOW,
.gpio = S3C2410_GPD9,
.gpio = S3C2410_GPD(9),
.def_trigger = "",
};

View File

@ -27,6 +27,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
@ -198,7 +199,7 @@ static struct platform_device qt2410_cs89x0 = {
/* LED */
static struct s3c24xx_led_platdata qt2410_pdata_led = {
.gpio = S3C2410_GPB0,
.gpio = S3C2410_GPB(0),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led",
.def_trigger = "timer",
@ -218,18 +219,18 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
{
switch (cs) {
case BITBANG_CS_ACTIVE:
s3c2410_gpio_setpin(S3C2410_GPB5, 0);
s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
break;
case BITBANG_CS_INACTIVE:
s3c2410_gpio_setpin(S3C2410_GPB5, 1);
s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
break;
}
}
static struct s3c2410_spigpio_info spi_gpio_cfg = {
.pin_clk = S3C2410_GPG7,
.pin_mosi = S3C2410_GPG6,
.pin_miso = S3C2410_GPG5,
.pin_clk = S3C2410_GPG(7),
.pin_mosi = S3C2410_GPG(6),
.pin_miso = S3C2410_GPG(5),
.chip_select = &spi_gpio_cs,
};
@ -346,13 +347,13 @@ static void __init qt2410_machine_init(void)
}
s3c24xx_fb_set_platdata(&qt2410_fb_info);
s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB0, 1);
s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
s3c_i2c0_set_platdata(NULL);
s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
s3c_pm_init();

View File

@ -18,6 +18,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/i2c.h>
@ -277,19 +278,19 @@ static struct platform_device vr1000_dm9k1 = {
static struct s3c24xx_led_platdata vr1000_led1_pdata = {
.name = "led1",
.gpio = S3C2410_GPB0,
.gpio = S3C2410_GPB(0),
.def_trigger = "",
};
static struct s3c24xx_led_platdata vr1000_led2_pdata = {
.name = "led2",
.gpio = S3C2410_GPB1,
.gpio = S3C2410_GPB(1),
.def_trigger = "",
};
static struct s3c24xx_led_platdata vr1000_led3_pdata = {
.name = "led3",
.gpio = S3C2410_GPB2,
.gpio = S3C2410_GPB(2),
.def_trigger = "",
};
@ -355,8 +356,8 @@ static struct clk *vr1000_clocks[] __initdata = {
static void vr1000_power_off(void)
{
s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
s3c2410_gpio_setpin(S3C2410_GPB9, 1);
s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
}
static void __init vr1000_map_io(void)

View File

@ -25,6 +25,7 @@
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/sysdev.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <mach/hardware.h>
@ -76,7 +77,7 @@ static void s3c2410_pm_prepare(void)
}
if ( machine_is_aml_m5900() )
s3c2410_gpio_setpin(S3C2410_GPF2, 1);
s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
}
@ -91,7 +92,7 @@ static int s3c2410_pm_resume(struct sys_device *dev)
__raw_writel(tmp, S3C2410_GSTATUS2);
if ( machine_is_aml_m5900() )
s3c2410_gpio_setpin(S3C2410_GPF2, 0);
s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
return 0;
}

View File

@ -18,9 +18,11 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/gpio.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
@ -29,7 +31,6 @@
#include <mach/bast-map.h>
#include <mach/bast-irq.h>
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@ -53,9 +54,9 @@ usb_simtec_powercontrol(int port, int to)
power_state[port] = to;
if (power_state[0] && power_state[1])
s3c2410_gpio_setpin(S3C2410_GPB4, 0);
gpio_set_value(S3C2410_GPB(4), 0);
else
s3c2410_gpio_setpin(S3C2410_GPB4, 1);
gpio_set_value(S3C2410_GPB(4), 1);
}
static irqreturn_t
@ -63,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw)
{
struct s3c2410_hcd_info *info = pw;
if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
if (gpio_get_value(S3C2410_GPG(10)) == 0) {
pr_debug("usb_simtec: over-current irq (oc detected)\n");
s3c2410_usb_report_oc(info, 3);
} else {
@ -106,10 +107,27 @@ static struct s3c2410_hcd_info usb_simtec_info = {
int usb_simtec_init(void)
{
printk("USB Power Control, (c) 2004 Simtec Electronics\n");
s3c_device_usb.dev.platform_data = &usb_simtec_info;
int ret;
s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPB4_OUTP);
s3c2410_gpio_setpin(S3C2410_GPB4, 1);
printk("USB Power Control, (c) 2004 Simtec Electronics\n");
ret = gpio_request(S3C2410_GPB(4), "USB power control");
if (ret < 0) {
pr_err("%s: failed to get GPB4\n", __func__);
return ret;
}
ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
if (ret < 0) {
pr_err("%s: failed to get GPG10\n", __func__);
gpio_free(S3C2410_GPB(4));
return ret;
}
/* turn power on */
gpio_direction_output(S3C2410_GPB(4), 1);
gpio_direction_input(S3C2410_GPG(10));
s3c_device_usb.dev.platform_data = &usb_simtec_info;
return 0;
}

View File

@ -38,6 +38,7 @@ menu "S3C2412 Machines"
config MACH_JIVE
bool "Logitech Jive"
select CPU_S3C2412
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Logitech Jive.
@ -50,6 +51,7 @@ config MACH_SMDK2413
select CPU_S3C2412
select MACH_S3C2413
select MACH_SMDK
select S3C_DEV_USB_HOST
help
Say Y here if you are using an SMDK2413
@ -72,6 +74,7 @@ config MACH_SMDK2412
config MACH_VSTMS
bool "VMSTMS"
select CPU_S3C2412
select S3C_DEV_USB_HOST
help
Say Y here if you are using an VSTMS board

View File

@ -20,12 +20,13 @@
#include <mach/dma.h>
#include <plat/dma.h>
#include <plat/dma-plat.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>

View File

@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@ -356,8 +357,8 @@ static void jive_lcm_reset(unsigned int set)
{
printk(KERN_DEBUG "%s(%d)\n", __func__, set);
s3c2410_gpio_setpin(S3C2410_GPG13, set);
s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPG(13), set);
s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
}
#undef LCD_UPPER_MARGIN
@ -390,13 +391,13 @@ static struct ili9320_platdata jive_lcm_config = {
static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
{
s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
}
static struct s3c2410_spigpio_info jive_lcd_spi = {
.bus_num = 1,
.pin_clk = S3C2410_GPG8,
.pin_mosi = S3C2410_GPB8,
.pin_clk = S3C2410_GPG(8),
.pin_mosi = S3C2410_GPB(8),
.num_chipselect = 1,
.chip_select = jive_lcd_spi_chipselect,
};
@ -412,13 +413,13 @@ static struct platform_device jive_device_lcdspi = {
static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
{
s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
}
static struct s3c2410_spigpio_info jive_wm8750_spi = {
.bus_num = 2,
.pin_clk = S3C2410_GPB4,
.pin_mosi = S3C2410_GPB9,
.pin_clk = S3C2410_GPB(4),
.pin_mosi = S3C2410_GPB(9),
.num_chipselect = 1,
.chip_select = jive_wm8750_chipselect,
};
@ -479,7 +480,7 @@ static struct platform_device *jive_devices[] __initdata = {
};
static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
.vbus_pin = S3C2410_GPG1, /* detect is on GPG1 */
.vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */
};
/* Jive power management device */
@ -529,8 +530,8 @@ static void jive_power_off(void)
{
printk(KERN_INFO "powering system down...\n");
s3c2410_gpio_setpin(S3C2410_GPC5, 1);
s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
}
static void __init jive_machine_init(void)
@ -634,22 +635,22 @@ static void __init jive_machine_init(void)
/* initialise the spi */
s3c2410_gpio_setpin(S3C2410_GPG13, 0);
s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB7, 1);
s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB6, 0);
s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPG8, 1);
s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
/* initialise the WM8750 spi */
s3c2410_gpio_setpin(S3C2410_GPH10, 1);
s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */

View File

@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@ -84,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
switch (cmd)
{
case S3C2410_UDC_P_ENABLE :
s3c2410_gpio_setpin(S3C2410_GPF2, 1);
s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
break;
case S3C2410_UDC_P_DISABLE :
s3c2410_gpio_setpin(S3C2410_GPF2, 0);
s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
break;
case S3C2410_UDC_P_RESET :
break;
@ -134,8 +135,8 @@ static void __init smdk2413_machine_init(void)
{ /* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_gpio_setpin(S3C2410_GPF2, 0);
s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |

View File

@ -33,6 +33,7 @@ config MACH_ANUBIS
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
development system
@ -43,6 +44,7 @@ config MACH_OSIRIS
select S3C24XX_DCLK
select PM_SIMTEC if PM
select S3C24XX_GPIO_EXTRA128
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
@ -58,12 +60,14 @@ config ARCH_S3C2440
bool "SMDK2440"
select CPU_S3C2440
select MACH_SMDK
select S3C_DEV_USB_HOST
help
Say Y here if you are using the SMDK2440.
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select CPU_S3C2440
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
@ -76,6 +80,7 @@ config SMDK2440_CPU2440
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
select CPU_S3C2440
select S3C_DEV_USB_HOST
help
Say Y here if you are using the AT2440EVB development board

View File

@ -17,14 +17,16 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <plat/dma.h>
#include <plat/dma-plat.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>

View File

@ -15,6 +15,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
@ -468,7 +469,7 @@ static void __init anubis_map_io(void)
anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
} else {
/* ensure that the GPIO is setup */
s3c2410_gpio_setpin(S3C2410_GPA0, 1);
s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
}
}

View File

@ -166,7 +166,7 @@ static struct platform_device at2440evb_device_eth = {
};
static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
.gpio_detect = S3C2410_GPG10,
.gpio_detect = S3C2410_GPG(10),
};
/* 7" LCD panel */

View File

@ -18,6 +18,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/string.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@ -120,16 +121,16 @@ static struct platform_device *nexcoder_devices[] __initdata = {
static void __init nexcoder_sensorboard_init(void)
{
// Initialize SCCB bus
s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
// Power up the sensor board
s3c2410_gpio_setpin(S3C2410_GPF1, 1);
s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
s3c2410_gpio_setpin(S3C2410_GPF2, 0);
s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
}
static void __init nexcoder_map_io(void)

View File

@ -15,6 +15,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
@ -291,8 +292,8 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
__raw_writeb(tmp, OSIRIS_VA_CTRL0);
/* ensure that an nRESET is not generated on resume. */
s3c2410_gpio_setpin(S3C2410_GPA21, 1);
s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
return 0;
}
@ -304,7 +305,7 @@ static int osiris_pm_resume(struct sys_device *sd)
__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
return 0;
}
@ -384,7 +385,7 @@ static void __init osiris_map_io(void)
osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
} else {
/* write-protect line to the NAND */
s3c2410_gpio_setpin(S3C2410_GPA0, 1);
s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
}
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */

View File

@ -20,12 +20,13 @@
#include <mach/dma.h>
#include <plat/dma.h>
#include <plat/dma-plat.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>

View File

@ -5,4 +5,27 @@
#
# Licensed under GPLv2
# Currently nothing here, this will be added later
# Configuration options for the S3C6410 CPU
config CPU_S3C6400
bool
select CPU_S3C6400_INIT
select CPU_S3C6400_CLOCK
help
Enable S3C6400 CPU support
config S3C6400_SETUP_SDHCI
bool
help
Internal configuration for default SDHCI
setup for S3C6400.
# S36400 Macchine support
config MACH_SMDK6400
bool "SMDK6400"
select CPU_S3C6400
select S3C_DEV_HSMMC
select S3C6400_SETUP_SDHCI
help
Machine support for the Samsung SMDK6400

View File

@ -12,4 +12,12 @@ obj- :=
# Core support for S3C6400 system
obj-n += blank.o
obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
# setup support
obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
# Machine support
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o

View File

@ -11,6 +11,63 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
/* currently nothing here, placeholder */
#define S3C_DMA_CHANNELS (16)
/* see mach-s3c2410/dma.h for notes on dma channel numbers */
/* Note, for the S3C64XX architecture we keep the DMACH_
* defines in the order they are allocated to [S]DMA0/[S]DMA1
* so that is easy to do DHACH_ -> DMA controller conversion
*/
enum dma_ch {
/* DMA0/SDMA0 */
DMACH_UART0 = 0,
DMACH_UART0_SRC2,
DMACH_UART1,
DMACH_UART1_SRC2,
DMACH_UART2,
DMACH_UART2_SRC2,
DMACH_UART3,
DMACH_UART3_SRC2,
DMACH_PCM0_TX,
DMACH_PCM0_RX,
DMACH_I2S0_OUT,
DMACH_I2S0_IN,
DMACH_SPI0_TX,
DMACH_SPI0_RX,
DMACH_HSI_I2SV40_TX,
DMACH_HSI_I2SV40_RX,
/* DMA1/SDMA1 */
DMACH_PCM1_TX = 16,
DMACH_PCM1_RX,
DMACH_I2S1_OUT,
DMACH_I2S1_IN,
DMACH_SPI1_TX,
DMACH_SPI1_RX,
DMACH_AC97_PCMOUT,
DMACH_AC97_PCMIN,
DMACH_AC97_MICIN,
DMACH_PWM,
DMACH_IRDA,
DMACH_EXTERNAL,
DMACH_RES1,
DMACH_RES2,
DMACH_SECURITY_RX, /* SDMA1 only */
DMACH_SECURITY_TX, /* SDMA1 only */
DMACH_MAX /* the end */
};
static __inline__ int s3c_dma_has_circular(void)
{
/* we will be supporting ciruclar buffers as soon as we have DMA
* engine support.
*/
return 1;
}
#define S3C2410_DMAF_CIRCULAR (1 << 0)
#include <plat/dma.h>
#endif /* __ASM_ARCH_IRQ_H */

View File

@ -39,6 +39,8 @@
#define S3C_VA_UART3 S3C_VA_UARTx(3)
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_USB_HSOTG (0x7C000000)
#define S3C64XX_PA_WATCHDOG (0x7E004000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
#define S3C64XX_PA_IIS0 (0x7F002000)
#define S3C64XX_PA_IIS1 (0x7F003000)
@ -57,6 +59,8 @@
#define S3C64XX_PA_MODEM (0x74108000)
#define S3C64XX_VA_MODEM S3C_ADDR(0x00600000)
#define S3C64XX_PA_USBHOST (0x74300000)
/* place VICs close together */
#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00)
#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
@ -69,5 +73,7 @@
#define S3C_PA_IIC S3C64XX_PA_IIC0
#define S3C_PA_IIC1 S3C64XX_PA_IIC1
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
#endif /* __ASM_ARCH_6400_MAP_H */

View File

@ -0,0 +1,16 @@
/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C64XX - clock register compatibility with s3c24xx
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <plat/regs-clock.h>

View File

@ -11,6 +11,8 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
#include <plat/watchdog-reset.h>
static void arch_idle(void)
{
/* nothing here yet */
@ -18,7 +20,11 @@ static void arch_idle(void)
static void arch_reset(char mode, const char *cmd)
{
/* nothing here yet */
if (mode != 's')
arch_wdt_reset();
/* if all else fails, or mode was for soft, jump to 0 */
cpu_reset(0);
}
#endif /* __ASM_ARCH_IRQ_H */

View File

@ -0,0 +1,96 @@
/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <plat/regs-serial.h>
#include <plat/s3c6400.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/iic.h>
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
};
static struct map_desc smdk6400_iodesc[] = {};
static void __init smdk6400_map_io(void)
{
s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
}
static struct platform_device *smdk6400_devices[] __initdata = {
&s3c_device_hsmmc1,
&s3c_device_i2c0,
};
static struct i2c_board_info i2c_devs[] __initdata = {
{ I2C_BOARD_INFO("wm8753", 0x1A), },
{ I2C_BOARD_INFO("24c08", 0x50), },
};
static void __init smdk6400_machine_init(void)
{
i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
}
MACHINE_START(SMDK6400, "SMDK6400")
/* Maintainer: Ben Dooks <ben@fluff.org> */
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C64XX_PA_SDRAM + 0x100,
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END

View File

@ -0,0 +1,89 @@
/* linux/arch/arm/mach-s3c6410/cpu.c
*
* Copyright 2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
#include <plat/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/s3c6400.h>
void __init s3c6400_map_io(void)
{
/* setup SDHCI */
s3c6400_default_sdhci0();
s3c6400_default_sdhci1();
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
}
void __init s3c6400_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
s3c24xx_register_baseclocks(xtal);
s3c64xx_register_clocks();
s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
s3c6400_setup_clocks();
}
void __init s3c6400_init_irq(void)
{
/* VIC0 does not have IRQS 5..7,
* VIC1 is fully populated. */
s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
}
struct sysdev_class s3c6400_sysclass = {
.name = "s3c6400-core",
};
static struct sys_device s3c6400_sysdev = {
.cls = &s3c6400_sysclass,
};
static int __init s3c6400_core_init(void)
{
return sysdev_class_register(&s3c6400_sysclass);
}
core_initcall(s3c6400_core_init);
int __init s3c6400_init(void)
{
printk("S3C6400: Initialising architecture\n");
return sysdev_register(&s3c6400_sysdev);
}

View File

@ -0,0 +1,63 @@
/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
*
* Copyright 2008 Simtec Electronics
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
char *s3c6400_hsmmc_clksrcs[4] = {
[0] = "hsmmc",
[1] = "hsmmc",
[2] = "mmc_bus",
/* [3] = "48m", - note not succesfully used yet */
};
void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
struct mmc_card *card)
{
u32 ctrl2, ctrl3;
ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
S3C_SDHCI_CTRL2_ENFBCLKRX |
S3C_SDHCI_CTRL2_DFCNT_NONE |
S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
if (ios->clock < 25 * 1000000)
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
S3C_SDHCI_CTRL3_FCSEL2 |
S3C_SDHCI_CTRL3_FCSEL1 |
S3C_SDHCI_CTRL3_FCSEL0);
else
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
writel(ctrl2, r + S3C_SDHCI_CONTROL2);
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}

View File

@ -16,9 +16,18 @@ config CPU_S3C6410
config S3C6410_SETUP_SDHCI
bool
select S3C64XX_SETUP_SDHCI_GPIO
help
Internal helper functions for S3C6410 based SDHCI systems
config MACH_ANW6410
bool "A&W6410"
select CPU_S3C6410
select S3C_DEV_FB
select S3C64XX_SETUP_FB_24BPP
help
Machine support for the A&W6410
config MACH_SMDK6410
bool "SMDK6410"
select CPU_S3C6410
@ -26,6 +35,8 @@ config MACH_SMDK6410
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
select S3C_DEV_FB
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C6410_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_FB_24BPP
@ -60,3 +71,29 @@ config SMDK6410_SD_CH1
channels 0 and 1 are the same.
endchoice
config SMDK6410_WM1190_EV1
bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
depends on MACH_SMDK6410
select REGULATOR
select REGULATOR_WM8350
select MFD_WM8350_I2C
select MFD_WM8350_CONFIG_MODE_0
select MFD_WM8350_CONFIG_MODE_3
select MFD_WM8352_CONFIG_MODE_0
help
The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
and audio daughtercard for the Samsung SMDK6410 reference
platform. Enabling this option will build support for this
module into the kernel. The presence of the module will be
detected at runtime so the the resulting kernel can be used
with or without the 1190-EV1 fitted.
config MACH_NCP
bool "NCP"
select CPU_S3C6410
select S3C_DEV_I2C1
select S3C_DEV_HSMMC1
select S3C64XX_SETUP_I2C1
help
Machine support for the Samsung NCP

View File

@ -20,4 +20,8 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o
# machine support
obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o

View File

@ -31,6 +31,7 @@
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
#include <plat/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
@ -68,7 +69,7 @@ void __init s3c6410_init_clocks(int xtal)
printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
s3c24xx_register_baseclocks(xtal);
s3c64xx_register_clocks();
s3c6400_register_clocks();
s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
s3c6400_setup_clocks();
}

View File

@ -0,0 +1,245 @@
/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
* Copyright 2009 Kwangwoo Lee
* Kwangwoo Lee <kwangwoo.lee@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/dm9000.h>
#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/regs-fb.h>
#include <mach/map.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/regs-gpio.h>
#include <plat/regs-modem.h>
/* DM9000 */
#define ANW6410_PA_DM9000 (0x18000000)
/* A hardware buffer to control external devices is mapped at 0x30000000.
* It can not be read. So current status must be kept in anw6410_extdev_status.
*/
#define ANW6410_VA_EXTDEV S3C_ADDR(0x02000000)
#define ANW6410_PA_EXTDEV (0x30000000)
#define ANW6410_EN_DM9000 (1<<11)
#define ANW6410_EN_LCD (1<<14)
static __u32 anw6410_extdev_status;
static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
};
/* framebuffer and LCD setup. */
static void __init anw6410_lcd_mode_set(void)
{
u32 tmp;
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
__raw_writel(tmp, S3C64XX_SPCON);
/* remove the LCD bypass */
tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
tmp &= ~MIFPCON_LCD_BYPASS;
__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
}
/* GPF1 = LCD panel power
* GPF4 = LCD backlight control
*/
static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
{
if (power) {
anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
gpio_direction_output(S3C64XX_GPF(1), 1);
gpio_direction_output(S3C64XX_GPF(4), 1);
} else {
anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
gpio_direction_output(S3C64XX_GPF(1), 0);
gpio_direction_output(S3C64XX_GPF(4), 0);
}
}
static struct plat_lcd_data anw6410_lcd_power_data = {
.set_power = anw6410_lcd_power_set,
};
static struct platform_device anw6410_lcd_powerdev = {
.name = "platform-lcd",
.dev.parent = &s3c_device_fb.dev,
.dev.platform_data = &anw6410_lcd_power_data,
};
static struct s3c_fb_pd_win anw6410_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.pixclock = 41094,
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 3,
.vsync_len = 1,
.xres = 800,
.yres = 480,
},
.max_bpp = 32,
.default_bpp = 16,
};
/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.win[0] = &anw6410_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
/* DM9000AEP 10/100 ethernet controller */
static void __init anw6410_dm9000_enable(void)
{
anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
}
static struct resource anw6410_dm9000_resource[] = {
[0] = {
.start = ANW6410_PA_DM9000,
.end = ANW6410_PA_DM9000 + 3,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = ANW6410_PA_DM9000 + 4,
.end = ANW6410_PA_DM9000 + 4 + 500,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_EINT(15),
.end = IRQ_EINT(15),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
},
};
static struct dm9000_plat_data anw6410_dm9000_pdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
/* dev_addr can be set to provide hwaddr. */
};
static struct platform_device anw6410_device_eth = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(anw6410_dm9000_resource),
.resource = anw6410_dm9000_resource,
.dev = {
.platform_data = &anw6410_dm9000_pdata,
},
};
static struct map_desc anw6410_iodesc[] __initdata = {
{
.virtual = (unsigned long)ANW6410_VA_EXTDEV,
.pfn = __phys_to_pfn(ANW6410_PA_EXTDEV),
.length = SZ_64K,
.type = MT_DEVICE,
},
};
static struct platform_device *anw6410_devices[] __initdata = {
&s3c_device_fb,
&anw6410_lcd_powerdev,
&anw6410_device_eth,
};
static void __init anw6410_map_io(void)
{
s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
anw6410_lcd_mode_set();
}
static void __init anw6410_machine_init(void)
{
s3c_fb_set_platdata(&anw6410_lcd_pdata);
gpio_request(S3C64XX_GPF(1), "panel power");
gpio_request(S3C64XX_GPF(4), "LCD backlight");
anw6410_dm9000_enable();
platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
}
MACHINE_START(ANW6410, "A&W6410")
/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C64XX_PA_SDRAM + 0x100,
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END

View File

@ -0,0 +1,107 @@
/*
* linux/arch/arm/mach-s3c6410/mach-ncp.c
*
* Copyright (C) 2008-2009 Samsung Electronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/regs-fb.h>
#include <mach/map.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#define UCON S3C2410_UCON_DEFAULT
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
/* REVISIT: NCP uses only serial 1, 2 */
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
static struct platform_device *ncp_devices[] __initdata = {
&s3c_device_hsmmc1,
&s3c_device_i2c0,
};
struct map_desc ncp_iodesc[] = {};
static void __init ncp_map_io(void)
{
s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
}
static void __init ncp_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
}
MACHINE_START(NCP, "NCP")
/* Maintainer: Samsung Electronics */
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C64XX_PA_SDRAM + 0x100,
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END

View File

@ -24,6 +24,12 @@
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/smsc911x.h>
#ifdef CONFIG_SMDK6410_WM1190_EV1
#include <linux/mfd/wm8350/core.h>
#include <linux/mfd/wm8350/pmic.h>
#endif
#include <video/platform_lcd.h>
@ -39,8 +45,12 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/regs-modem.h>
#include <plat/regs-gpio.h>
#include <plat/regs-sys.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c6410.h>
#include <plat/clock.h>
@ -129,6 +139,37 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
static struct resource smdk6410_smsc911x_resources[] = {
[0] = {
.start = 0x18000000,
.end = 0x18000000 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = S3C_EINT(10),
.end = S3C_EINT(10),
.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
},
};
static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct platform_device smdk6410_smsc911x = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
.resource = &smdk6410_smsc911x_resources[0],
.dev = {
.platform_data = &smdk6410_smsc911x_pdata,
},
};
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
@ -141,12 +182,155 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_fb,
&s3c_device_usb,
&s3c_device_usb_hsotg,
&smdk6410_lcd_powerdev,
&smdk6410_smsc911x,
};
#ifdef CONFIG_SMDK6410_WM1190_EV1
/* S3C64xx internal logic & PLL */
static struct regulator_init_data wm8350_dcdc1_data = {
.constraints = {
.name = "PVDD_INT/PVDD_PLL",
.min_uV = 1200000,
.max_uV = 1200000,
.always_on = 1,
.apply_uV = 1,
},
};
/* Memory */
static struct regulator_init_data wm8350_dcdc3_data = {
.constraints = {
.name = "PVDD_MEM",
.min_uV = 1800000,
.max_uV = 1800000,
.always_on = 1,
.state_mem = {
.uV = 1800000,
.mode = REGULATOR_MODE_NORMAL,
.enabled = 1,
},
.initial_state = PM_SUSPEND_MEM,
},
};
/* USB, EXT, PCM, ADC/DAC, USB, MMC */
static struct regulator_init_data wm8350_dcdc4_data = {
.constraints = {
.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
.min_uV = 3000000,
.max_uV = 3000000,
.always_on = 1,
},
};
/* ARM core */
static struct regulator_consumer_supply dcdc6_consumers[] = {
{
.supply = "vddarm",
}
};
static struct regulator_init_data wm8350_dcdc6_data = {
.constraints = {
.name = "PVDD_ARM",
.min_uV = 1000000,
.max_uV = 1300000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
.consumer_supplies = dcdc6_consumers,
};
/* Alive */
static struct regulator_init_data wm8350_ldo1_data = {
.constraints = {
.name = "PVDD_ALIVE",
.min_uV = 1200000,
.max_uV = 1200000,
.always_on = 1,
.apply_uV = 1,
},
};
/* OTG */
static struct regulator_init_data wm8350_ldo2_data = {
.constraints = {
.name = "PVDD_OTG",
.min_uV = 3300000,
.max_uV = 3300000,
.always_on = 1,
},
};
/* LCD */
static struct regulator_init_data wm8350_ldo3_data = {
.constraints = {
.name = "PVDD_LCD",
.min_uV = 3000000,
.max_uV = 3000000,
.always_on = 1,
},
};
/* OTGi/1190-EV1 HPVDD & AVDD */
static struct regulator_init_data wm8350_ldo4_data = {
.constraints = {
.name = "PVDD_OTGI/HPVDD/AVDD",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct {
int regulator;
struct regulator_init_data *initdata;
} wm1190_regulators[] = {
{ WM8350_DCDC_1, &wm8350_dcdc1_data },
{ WM8350_DCDC_3, &wm8350_dcdc3_data },
{ WM8350_DCDC_4, &wm8350_dcdc4_data },
{ WM8350_DCDC_6, &wm8350_dcdc6_data },
{ WM8350_LDO_1, &wm8350_ldo1_data },
{ WM8350_LDO_2, &wm8350_ldo2_data },
{ WM8350_LDO_3, &wm8350_ldo3_data },
{ WM8350_LDO_4, &wm8350_ldo4_data },
};
static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
{
int i;
/* Instantiate the regulators */
for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
wm8350_register_regulator(wm8350,
wm1190_regulators[i].regulator,
wm1190_regulators[i].initdata);
return 0;
}
static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
.init = smdk6410_wm8350_init,
.irq_high = 1,
};
#endif
static struct i2c_board_info i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
{ I2C_BOARD_INFO("wm8580", 0x1b), },
#ifdef CONFIG_SMDK6410_WM1190_EV1
{ I2C_BOARD_INFO("wm8350", 0x1a),
.platform_data = &smdk6410_wm8350_pdata,
.irq = S3C_EINT(12),
},
#endif
};
static struct i2c_board_info i2c_devs1[] __initdata = {
@ -155,9 +339,23 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
static void __init smdk6410_map_io(void)
{
u32 tmp;
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
__raw_writel(tmp, S3C64XX_SPCON);
/* remove the lcd bypass */
tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
tmp &= ~MIFPCON_LCD_BYPASS;
__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
}
static void __init smdk6410_machine_init(void)

View File

@ -21,8 +21,6 @@
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
@ -35,22 +33,6 @@ char *s3c6410_hsmmc_clksrcs[4] = {
/* [3] = "48m", - note not succesfully used yet */
};
void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
unsigned int gpio;
unsigned int end;
end = S3C64XX_GPG(2 + width);
/* Set all the necessary GPG pins to special-function 0 */
for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
}
void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
void __iomem *r,
@ -84,19 +66,3 @@ void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
unsigned int gpio;
unsigned int end;
end = S3C64XX_GPH(2 + width);
/* Set all the necessary GPG pins to special-function 0 */
for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
}

View File

@ -116,7 +116,7 @@ void __init versatile_init_irq(void)
{
unsigned int i;
vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0);
vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);

View File

@ -71,6 +71,15 @@ config S3C2410_PM_DEBUG
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
for more information.
config S3C_PM_DEBUG_LED_SMDK
bool "SMDK LED suspend/resume debugging"
depends on PM && (MACH_SMDK6410)
help
Say Y here to enable the use of the SMDK LEDs on the baseboard
for debugging of the state of the suspend and resume process.
Note, this currently only works for S3C64XX based SMDK boards.
config S3C2410_PM_CHECK
bool "S3C2410 PM Suspend Memory CRC"
depends on PM && CRC32
@ -150,6 +159,13 @@ config S3C_GPIO_CFG_S3C64XX
Internal configuration to enable S3C64XX style GPIO configuration
functions.
# DMA
config S3C_DMA
bool
help
Internal configuration for S3C DMA core
# device definitions to compile in
config S3C_DEV_HSMMC
@ -172,4 +188,14 @@ config S3C_DEV_FB
help
Compile in platform device definition for framebuffer
config S3C_DEV_USB_HOST
bool
help
Compile in platform device definition for USB host.
config S3C_DEV_USB_HSOTG
bool
help
Compile in platform device definition for USB high-speed OtG
endif

View File

@ -18,9 +18,14 @@ obj-y += pwm-clock.o
obj-y += gpio.o
obj-y += gpio-config.o
# DMA support
obj-$(CONFIG_S3C_DMA) += dma.o
# PM support
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += pm-gpio.o
obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o
# devices
@ -30,3 +35,5 @@ obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o

View File

@ -0,0 +1,41 @@
/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C series device definition for USB high-speed UDC/OtG block
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <plat/devs.h>
static struct resource s3c_usb_hsotg_resources[] = {
[0] = {
.start = S3C_PA_USB_HSOTG,
.end = S3C_PA_USB_HSOTG + 0x10000 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_OTG,
.end = IRQ_OTG,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device s3c_device_usb_hsotg = {
.name = "s3c-hsotg",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources),
.resource = s3c_usb_hsotg_resources,
};

View File

@ -0,0 +1,50 @@
/* linux/arch/arm/plat-s3c/dev-usb.c
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C series device definition for USB host
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <plat/devs.h>
static struct resource s3c_usb_resource[] = {
[0] = {
.start = S3C_PA_USBHOST,
.end = S3C_PA_USBHOST + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USBH,
.end = IRQ_USBH,
.flags = IORESOURCE_IRQ,
}
};
static u64 s3c_device_usb_dmamask = 0xffffffffUL;
struct platform_device s3c_device_usb = {
.name = "s3c2410-ohci",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_usb_resource),
.resource = s3c_usb_resource,
.dev = {
.dma_mask = &s3c_device_usb_dmamask,
.coherent_dma_mask = 0xffffffffUL
}
};
EXPORT_SYMBOL(s3c_device_usb);

86
arch/arm/plat-s3c/dma.c Normal file
View File

@ -0,0 +1,86 @@
/* linux/arch/arm/plat-s3c/dma.c
*
* Copyright (c) 2003-2005,2006,2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C DMA core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
struct s3c2410_dma_buf;
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <plat/dma-plat.h>
/* dma channel state information */
struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
/* s3c_dma_lookup_channel
*
* change the dma channel number given into a real dma channel id
*/
struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
{
if (channel & DMACH_LOW_LEVEL)
return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
else
return s3c_dma_chan_map[channel];
}
/* do we need to protect the settings of the fields from
* irq?
*/
int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
chan->op_fn = rtn;
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_set_opfn);
int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
chan->callback_fn = rtn;
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
chan->flags = flags;
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_setflags);

View File

@ -16,7 +16,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <plat/gpio-core.h>
#include <mach/gpio-core.h>
#ifdef CONFIG_S3C_GPIO_TRACK
struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
@ -140,6 +140,15 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
if (!gc->get)
gc->get = s3c_gpiolib_get;
#ifdef CONFIG_PM
if (chip->pm != NULL) {
if (!chip->pm->save || !chip->pm->resume)
printk(KERN_ERR "gpio: %s has missing PM functions\n",
gc->label);
} else
printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
#endif
/* gpiochip_add() prints own failure message on error. */
ret = gpiochip_add(gc);
if (ret >= 0)

View File

@ -19,9 +19,11 @@ struct s3c_adc_client;
extern int s3c_adc_start(struct s3c_adc_client *client,
unsigned int channel, unsigned int nr_samples);
extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
extern struct s3c_adc_client *
s3c_adc_register(struct platform_device *pdev,
void (*select)(unsigned selected),
void (*conv)(unsigned d0, unsigned d1),
void (*conv)(unsigned d0, unsigned d1,
unsigned *samples_left),
unsigned int is_ts);
extern void s3c_adc_release(struct s3c_adc_client *client);

View File

@ -50,6 +50,7 @@ extern struct clk clk_xtal;
extern struct clk clk_ext;
/* S3C64XX specific clocks */
extern struct clk clk_h2;
extern struct clk clk_27m;
extern struct clk clk_48m;

View File

@ -69,3 +69,6 @@ extern struct sysdev_class s3c2412_sysclass;
extern struct sysdev_class s3c2440_sysclass;
extern struct sysdev_class s3c2442_sysclass;
extern struct sysdev_class s3c2443_sysclass;
extern struct sysdev_class s3c6410_sysclass;
extern struct sysdev_class s3c64xx_sysclass;

View File

@ -45,6 +45,7 @@ extern struct platform_device s3c_device_spi1;
extern struct platform_device s3c_device_nand;
extern struct platform_device s3c_device_usbgadget;
extern struct platform_device s3c_device_usb_hsotg;
/* s3c2440 specific devices */

View File

@ -0,0 +1,22 @@
/* arch/arm/plat-s3c/include/plat/dma.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* Samsung S3C DMA core support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
/* the currently allocated channel information */
extern struct s3c2410_dma_chan s3c2410_chans[];

View File

@ -0,0 +1,127 @@
/* arch/arm/plat-s3c/include/plat/dma.h
*
* Copyright (C) 2003,2004,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C DMA support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
enum s3c2410_dma_buffresult {
S3C2410_RES_OK,
S3C2410_RES_ERR,
S3C2410_RES_ABORT
};
enum s3c2410_dmasrc {
S3C2410_DMASRC_HW, /* source is memory */
S3C2410_DMASRC_MEM /* source is hardware */
};
/* enum s3c2410_chan_op
*
* operation codes passed to the DMA code by the user, and also used
* to inform the current channel owner of any changes to the system state
*/
enum s3c2410_chan_op {
S3C2410_DMAOP_START,
S3C2410_DMAOP_STOP,
S3C2410_DMAOP_PAUSE,
S3C2410_DMAOP_RESUME,
S3C2410_DMAOP_FLUSH,
S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
S3C2410_DMAOP_STARTED, /* indicate channel started */
};
struct s3c2410_dma_client {
char *name;
};
struct s3c2410_dma_chan;
/* s3c2410_dma_cbfn_t
*
* buffer callback routine type
*/
typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
void *buf, int size,
enum s3c2410_dma_buffresult result);
typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
enum s3c2410_chan_op );
/* s3c2410_dma_request
*
* request a dma channel exclusivley
*/
extern int s3c2410_dma_request(unsigned int channel,
struct s3c2410_dma_client *, void *dev);
/* s3c2410_dma_ctrl
*
* change the state of the dma channel
*/
extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
/* s3c2410_dma_setflags
*
* set the channel's flags to a given state
*/
extern int s3c2410_dma_setflags(unsigned int channel,
unsigned int flags);
/* s3c2410_dma_free
*
* free the dma channel (will also abort any outstanding operations)
*/
extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
/* s3c2410_dma_enqueue
*
* place the given buffer onto the queue of operations for the channel.
* The buffer must be allocated from dma coherent memory, or the Dcache/WB
* drained before the buffer is given to the DMA system.
*/
extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
dma_addr_t data, int size);
/* s3c2410_dma_config
*
* configure the dma channel
*/
extern int s3c2410_dma_config(unsigned int channel, int xferunit);
/* s3c2410_dma_devconfig
*
* configure the device we're talking to
*/
extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
unsigned long devaddr);
/* s3c2410_dma_getposition
*
* get the position that the dma transfer is currently at
*/
extern int s3c2410_dma_getposition(unsigned int channel,
dma_addr_t *src, dma_addr_t *dest);
extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);

View File

@ -20,6 +20,18 @@
* specific code.
*/
struct s3c_gpio_chip;
/**
* struct s3c_gpio_pm - power management (suspend/resume) information
* @save: Routine to save the state of the GPIO block
* @resume: Routine to resume the GPIO block.
*/
struct s3c_gpio_pm {
void (*save)(struct s3c_gpio_chip *chip);
void (*resume)(struct s3c_gpio_chip *chip);
};
struct s3c_gpio_cfg;
/**
@ -27,6 +39,7 @@ struct s3c_gpio_cfg;
* @chip: The chip structure to be exported via gpiolib.
* @base: The base pointer to the gpio configuration registers.
* @config: special function and pull-resistor control information.
* @pm_save: Save information for suspend/resume support.
*
* This wrapper provides the necessary information for the Samsung
* specific gpios being registered with gpiolib.
@ -34,7 +47,11 @@ struct s3c_gpio_cfg;
struct s3c_gpio_chip {
struct gpio_chip chip;
struct s3c_gpio_cfg *config;
struct s3c_gpio_pm *pm;
void __iomem *base;
#ifdef CONFIG_PM
u32 pm_save[4];
#endif
};
static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
@ -75,3 +92,16 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
#endif
#ifdef CONFIG_PM
extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
#define __gpio_pm(x) x
#else
#define s3c_gpio_pm_1bit NULL
#define s3c_gpio_pm_2bit NULL
#define s3c_gpio_pm_4bit NULL
#define __gpio_pm(x) NULL
#endif /* CONFIG_PM */

View File

@ -44,6 +44,8 @@ extern void (*pm_cpu_sleep)(void);
extern unsigned long s3c_pm_flags;
extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */
/* from sleep.S */
extern int s3c_cpu_save(unsigned long *saveblk);
@ -88,6 +90,7 @@ struct pm_uart_save {
u32 ufcon;
u32 umcon;
u32 ubrdiv;
u32 udivslot;
};
/* helper functions to save/restore lists of registers. */
@ -124,6 +127,18 @@ extern void s3c_pm_dbg(const char *msg, ...);
#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
#endif
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
/**
* s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
* @set: set bits for the state of the LEDs
* @clear: clear bits for the state of the LEDs.
*/
extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
#else
static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
/* suspend memory checking */
#ifdef CONFIG_S3C2410_PM_CHECK

View File

@ -189,6 +189,11 @@
#define S3C2443_DIVSLOT (0x2C)
/* S3C64XX interrupt registers. */
#define S3C64XX_UINTP 0x30
#define S3C64XX_UINTSP 0x34
#define S3C64XX_UINTM 0x38
#ifndef __ASSEMBLY__
/* struct s3c24xx_uart_clksrc

View File

@ -67,12 +67,52 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
/* Helper function availablity */
extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
/* S3C6400 SDHCI setup */
#ifdef CONFIG_S3C6400_SETUP_SDHCI
extern char *s3c6400_hsmmc_clksrcs[4];
#ifdef CONFIG_S3C_DEV_HSMMC
extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
struct mmc_card *card);
static inline void s3c6400_default_sdhci0(void)
{
s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
}
#else
static inline void s3c6400_default_sdhci0(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC */
#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s3c6400_default_sdhci1(void)
{
s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
}
#else
static inline void s3c6400_default_sdhci1(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC1 */
#else
static inline void s3c6400_default_sdhci0(void) { }
static inline void s3c6400_default_sdhci1(void) { }
#endif /* CONFIG_S3C6400_SETUP_SDHCI */
/* S3C6410 SDHCI setup */
#ifdef CONFIG_S3C6410_SETUP_SDHCI
extern char *s3c6410_hsmmc_clksrcs[4];
extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
@ -82,7 +122,7 @@ extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
static inline void s3c6410_default_sdhci0(void)
{
s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
}
#else
@ -93,7 +133,7 @@ static inline void s3c6410_default_sdhci0(void) { }
static inline void s3c6410_default_sdhci1(void)
{
s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
}
#else

View File

@ -0,0 +1,29 @@
/* arch/arm/plat-s3c/include/plat/udc-hs.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C USB2.0 High-speed / OtG platform information
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
enum s3c_hostg_dmamode {
S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */
S3C_HSOTG_DMA_ONLY, /* always use DMA */
S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */
};
/**
* struct s3c_hsotg_plat - platform data for high-speed otg/udc
* @dma: Whether to use DMA or not.
* @is_osc: The clock source is an oscillator, not a crystal
*/
struct s3c_hsotg_plat {
enum s3c_hostg_dmamode dma;
unsigned int is_osc : 1;
};

View File

@ -0,0 +1,49 @@
/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
*
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - System define for arch_reset() function
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <plat/regs-watchdog.h>
#include <mach/map.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
static inline void arch_wdt_reset(void)
{
struct clk *wdtclk;
printk("arch_reset: attempting watchdog reset\n");
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
wdtclk = clk_get(NULL, "watchdog");
if (!IS_ERR(wdtclk)) {
clk_enable(wdtclk);
} else
printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
/* put initial values into count and data */
__raw_writel(0x80, S3C2410_WTCNT);
__raw_writel(0x80, S3C2410_WTDAT);
/* set the watchdog to go and reset... */
__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
/* wait for reset to assert... */
mdelay(500);
printk(KERN_ERR "Watchdog reset failed to assert reset\n");
/* delay to allow the serial port to show the message */
mdelay(50);
}

380
arch/arm/plat-s3c/pm-gpio.c Normal file
View File

@ -0,0 +1,380 @@
/* linux/arch/arm/plat-s3c/pm-gpio.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C series GPIO PM code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/sysdev.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/gpio-core.h>
#include <plat/pm.h>
/* PM GPIO helpers */
#define OFFS_CON (0x00)
#define OFFS_DAT (0x04)
#define OFFS_UP (0x08)
static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
{
chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
}
static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
{
void __iomem *base = chip->base;
u32 old_gpcon = __raw_readl(base + OFFS_CON);
u32 old_gpdat = __raw_readl(base + OFFS_DAT);
u32 gps_gpcon = chip->pm_save[0];
u32 gps_gpdat = chip->pm_save[1];
u32 gpcon;
/* GPACON only has one bit per control / data and no PULLUPs.
* GPACON[x] = 0 => Output, 1 => SFN */
/* first set all SFN bits to SFN */
gpcon = old_gpcon | gps_gpcon;
__raw_writel(gpcon, base + OFFS_CON);
/* now set all the other bits */
__raw_writel(gps_gpdat, base + OFFS_DAT);
__raw_writel(gps_gpcon, base + OFFS_CON);
S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
}
struct s3c_gpio_pm s3c_gpio_pm_1bit = {
.save = s3c_gpio_pm_1bit_save,
.resume = s3c_gpio_pm_1bit_resume,
};
static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
{
chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
}
/* Test whether the given masked+shifted bits of an GPIO configuration
* are one of the SFN (special function) modes. */
static inline int is_sfn(unsigned long con)
{
return con >= 2;
}
/* Test if the given masked+shifted GPIO configuration is an input */
static inline int is_in(unsigned long con)
{
return con == 0;
}
/* Test if the given masked+shifted GPIO configuration is an output */
static inline int is_out(unsigned long con)
{
return con == 1;
}
/**
* s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
* @chip: The chip information to resume.
*
* Restore one of the GPIO banks that was saved during suspend. This is
* not as simple as once thought, due to the possibility of glitches
* from the order that the CON and DAT registers are set in.
*
* The three states the pin can be are {IN,OUT,SFN} which gives us 9
* combinations of changes to check. Three of these, if the pin stays
* in the same configuration can be discounted. This leaves us with
* the following:
*
* { IN => OUT } Change DAT first
* { IN => SFN } Change CON first
* { OUT => SFN } Change CON first, so new data will not glitch
* { OUT => IN } Change CON first, so new data will not glitch
* { SFN => IN } Change CON first
* { SFN => OUT } Change DAT first, so new data will not glitch [1]
*
* We do not currently deal with the UP registers as these control
* weak resistors, so a small delay in change should not need to bring
* these into the calculations.
*
* [1] this assumes that writing to a pin DAT whilst in SFN will set the
* state for when it is next output.
*/
static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
{
void __iomem *base = chip->base;
u32 old_gpcon = __raw_readl(base + OFFS_CON);
u32 old_gpdat = __raw_readl(base + OFFS_DAT);
u32 gps_gpcon = chip->pm_save[0];
u32 gps_gpdat = chip->pm_save[1];
u32 gpcon, old, new, mask;
u32 change_mask = 0x0;
int nr;
/* restore GPIO pull-up settings */
__raw_writel(chip->pm_save[2], base + OFFS_UP);
/* Create a change_mask of all the items that need to have
* their CON value changed before their DAT value, so that
* we minimise the work between the two settings.
*/
for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
old = (old_gpcon & mask) >> nr;
new = (gps_gpcon & mask) >> nr;
/* If there is no change, then skip */
if (old == new)
continue;
/* If both are special function, then skip */
if (is_sfn(old) && is_sfn(new))
continue;
/* Change is IN => OUT, do not change now */
if (is_in(old) && is_out(new))
continue;
/* Change is SFN => OUT, do not change now */
if (is_sfn(old) && is_out(new))
continue;
/* We should now be at the case of IN=>SFN,
* OUT=>SFN, OUT=>IN, SFN=>IN. */
change_mask |= mask;
}
/* Write the new CON settings */
gpcon = old_gpcon & ~change_mask;
gpcon |= gps_gpcon & change_mask;
__raw_writel(gpcon, base + OFFS_CON);
/* Now change any items that require DAT,CON */
__raw_writel(gps_gpdat, base + OFFS_DAT);
__raw_writel(gps_gpcon, base + OFFS_CON);
S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
}
struct s3c_gpio_pm s3c_gpio_pm_2bit = {
.save = s3c_gpio_pm_2bit_save,
.resume = s3c_gpio_pm_2bit_resume,
};
#ifdef CONFIG_ARCH_S3C64XX
static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
{
chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
if (chip->chip.ngpio > 8)
chip->pm_save[0] = __raw_readl(chip->base - 4);
}
static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
{
u32 old, new, mask;
u32 change_mask = 0x0;
int nr;
for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
old = (old_gpcon & mask) >> nr;
new = (gps_gpcon & mask) >> nr;
/* If there is no change, then skip */
if (old == new)
continue;
/* If both are special function, then skip */
if (is_sfn(old) && is_sfn(new))
continue;
/* Change is IN => OUT, do not change now */
if (is_in(old) && is_out(new))
continue;
/* Change is SFN => OUT, do not change now */
if (is_sfn(old) && is_out(new))
continue;
/* We should now be at the case of IN=>SFN,
* OUT=>SFN, OUT=>IN, SFN=>IN. */
change_mask |= mask;
}
return change_mask;
}
static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
{
void __iomem *con = chip->base + (index * 4);
u32 old_gpcon = __raw_readl(con);
u32 gps_gpcon = chip->pm_save[index + 1];
u32 gpcon, mask;
mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
gpcon = old_gpcon & ~mask;
gpcon |= gps_gpcon & mask;
__raw_writel(gpcon, con);
}
static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
{
void __iomem *base = chip->base;
u32 old_gpcon[2];
u32 old_gpdat = __raw_readl(base + OFFS_DAT);
u32 gps_gpdat = chip->pm_save[2];
/* First, modify the CON settings */
old_gpcon[0] = 0;
old_gpcon[1] = __raw_readl(base + OFFS_CON);
s3c_gpio_pm_4bit_con(chip, 0);
if (chip->chip.ngpio > 8) {
old_gpcon[0] = __raw_readl(base - 4);
s3c_gpio_pm_4bit_con(chip, -1);
}
/* Now change the configurations that require DAT,CON */
__raw_writel(chip->pm_save[2], base + OFFS_DAT);
__raw_writel(chip->pm_save[1], base + OFFS_CON);
if (chip->chip.ngpio > 8)
__raw_writel(chip->pm_save[0], base - 4);
__raw_writel(chip->pm_save[2], base + OFFS_DAT);
__raw_writel(chip->pm_save[3], base + OFFS_UP);
if (chip->chip.ngpio > 8) {
S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
chip->chip.label, old_gpcon[0], old_gpcon[1],
__raw_readl(base - 4),
__raw_readl(base + OFFS_CON),
old_gpdat, gps_gpdat);
} else
S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
chip->chip.label, old_gpcon[1],
__raw_readl(base + OFFS_CON),
old_gpdat, gps_gpdat);
}
struct s3c_gpio_pm s3c_gpio_pm_4bit = {
.save = s3c_gpio_pm_4bit_save,
.resume = s3c_gpio_pm_4bit_resume,
};
#endif /* CONFIG_ARCH_S3C64XX */
/**
* s3c_pm_save_gpio() - save gpio chip data for suspend
* @ourchip: The chip for suspend.
*/
static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
{
struct s3c_gpio_pm *pm = ourchip->pm;
if (pm == NULL || pm->save == NULL)
S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
else
pm->save(ourchip);
}
/**
* s3c_pm_save_gpios() - Save the state of the GPIO banks.
*
* For all the GPIO banks, save the state of each one ready for going
* into a suspend mode.
*/
void s3c_pm_save_gpios(void)
{
struct s3c_gpio_chip *ourchip;
unsigned int gpio_nr;
for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
ourchip = s3c_gpiolib_getchip(gpio_nr);
if (!ourchip)
continue;
s3c_pm_save_gpio(ourchip);
S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
ourchip->chip.label,
ourchip->pm_save[0],
ourchip->pm_save[1],
ourchip->pm_save[2],
ourchip->pm_save[3]);
gpio_nr += ourchip->chip.ngpio;
gpio_nr += CONFIG_S3C_GPIO_SPACE;
}
}
/**
* s3c_pm_resume_gpio() - restore gpio chip data after suspend
* @ourchip: The suspended chip.
*/
static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
{
struct s3c_gpio_pm *pm = ourchip->pm;
if (pm == NULL || pm->resume == NULL)
S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
else
pm->resume(ourchip);
}
void s3c_pm_restore_gpios(void)
{
struct s3c_gpio_chip *ourchip;
unsigned int gpio_nr;
for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
ourchip = s3c_gpiolib_getchip(gpio_nr);
if (!ourchip)
continue;
s3c_pm_resume_gpio(ourchip);
gpio_nr += ourchip->chip.ngpio;
gpio_nr += CONFIG_S3C_GPIO_SPACE;
}
}

View File

@ -21,11 +21,10 @@
#include <asm/cacheflush.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-irq.h>
#include <asm/irq.h>
@ -70,6 +69,8 @@ static inline void s3c_pm_debug_init(void)
/* Save the UART configurations if we are configured for debug. */
unsigned char pm_uart_udivslot;
#ifdef CONFIG_S3C2410_PM_DEBUG
struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
@ -83,6 +84,12 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
save->ufcon = __raw_readl(regs + S3C2410_UFCON);
save->umcon = __raw_readl(regs + S3C2410_UMCON);
save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
if (pm_uart_udivslot)
save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
}
static void s3c_pm_save_uarts(void)
@ -98,11 +105,16 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
{
void __iomem *regs = S3C_VA_UARTx(uart);
s3c_pm_arch_update_uart(regs, save);
__raw_writel(save->ulcon, regs + S3C2410_ULCON);
__raw_writel(save->ucon, regs + S3C2410_UCON);
__raw_writel(save->ufcon, regs + S3C2410_UFCON);
__raw_writel(save->umcon, regs + S3C2410_UMCON);
__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
if (pm_uart_udivslot)
__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
}
static void s3c_pm_restore_uarts(void)
@ -313,6 +325,9 @@ static int s3c_pm_enter(suspend_state_t state)
S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
/* LEDs should now be 1110 */
s3c_pm_debug_smdkled(1 << 1, 0);
s3c_pm_check_restore();
/* ok, let's return from sleep */

View File

@ -71,6 +71,7 @@ config PM_SIMTEC
config S3C2410_DMA
bool "S3C2410 DMA support"
depends on ARCH_S3C2410
select S3C_DMA
help
S3C2410 DMA support. This is needed for drivers like sound which
use the S3C2410's DMA system to move data to and from the

View File

@ -45,7 +45,8 @@ struct s3c_adc_client {
unsigned char channel;
void (*select_cb)(unsigned selected);
void (*convert_cb)(unsigned val1, unsigned val2);
void (*convert_cb)(unsigned val1, unsigned val2,
unsigned *samples_left);
};
struct adc_device {
@ -158,7 +159,8 @@ static void s3c_adc_default_select(unsigned select)
struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
void (*select)(unsigned int selected),
void (*conv)(unsigned d0, unsigned d1),
void (*conv)(unsigned d0, unsigned d1,
unsigned *samples_left),
unsigned int is_ts)
{
struct s3c_adc_client *client;
@ -227,9 +229,10 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
data1 = readl(adc->regs + S3C2410_ADCDAT1);
adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
client->nr_samples--;
(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
if (--client->nr_samples > 0) {
if (client->nr_samples > 0) {
/* fire another conversion for this */
client->select_cb(1);

View File

@ -18,6 +18,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
@ -47,27 +48,27 @@
/* LED devices */
static struct s3c24xx_led_platdata smdk_pdata_led4 = {
.gpio = S3C2410_GPF4,
.gpio = S3C2410_GPF(4),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led4",
.def_trigger = "timer",
};
static struct s3c24xx_led_platdata smdk_pdata_led5 = {
.gpio = S3C2410_GPF5,
.gpio = S3C2410_GPF(5),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led5",
.def_trigger = "nand-disk",
};
static struct s3c24xx_led_platdata smdk_pdata_led6 = {
.gpio = S3C2410_GPF6,
.gpio = S3C2410_GPF(6),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led6",
};
static struct s3c24xx_led_platdata smdk_pdata_led7 = {
.gpio = S3C2410_GPF7,
.gpio = S3C2410_GPF(7),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led7",
};
@ -184,15 +185,15 @@ void __init smdk_machine_init(void)
{
/* Configure the LEDs (even if we have no LED support)*/
s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPF4, 1);
s3c2410_gpio_setpin(S3C2410_GPF5, 1);
s3c2410_gpio_setpin(S3C2410_GPF6, 1);
s3c2410_gpio_setpin(S3C2410_GPF7, 1);
s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
if (machine_is_smdk2443())
smdk_nand_info.twrph0 = 50;

View File

@ -136,36 +136,6 @@ struct platform_device *s3c24xx_uart_src[4] = {
struct platform_device *s3c24xx_uart_devs[4] = {
};
/* USB Host Controller */
static struct resource s3c_usb_resource[] = {
[0] = {
.start = S3C24XX_PA_USBHOST,
.end = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USBH,
.end = IRQ_USBH,
.flags = IORESOURCE_IRQ,
}
};
static u64 s3c_device_usb_dmamask = 0xffffffffUL;
struct platform_device s3c_device_usb = {
.name = "s3c2410-ohci",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_usb_resource),
.resource = s3c_usb_resource,
.dev = {
.dma_mask = &s3c_device_usb_dmamask,
.coherent_dma_mask = 0xffffffffUL
}
};
EXPORT_SYMBOL(s3c_device_usb);
/* LCD Controller */
static struct resource s3c_lcd_resource[] = {

View File

@ -31,10 +31,10 @@
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <plat/dma.h>
#include <plat/dma-plat.h>
#include <plat/regs-dma.h>
/* io map for dma */
static void __iomem *dma_base;
@ -44,8 +44,6 @@ static int dma_channels;
static struct s3c24xx_dma_selection dma_sel;
/* dma channel state information */
struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
/* debugging functions */
@ -135,21 +133,6 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
#define dbg_showchan(chan) do { } while(0)
#endif /* CONFIG_S3C2410_DMA_DEBUG */
static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
/* lookup_dma_channel
*
* change the dma channel number given into a real dma channel id
*/
static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
{
if (channel & DMACH_LOW_LEVEL)
return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
else
return dma_chan_map[channel];
}
/* s3c2410_dma_stats_timeout
*
* Update DMA stats from timeout info
@ -214,8 +197,6 @@ s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
return 0;
}
/* s3c2410_dma_loadbuffer
*
* load a buffer, and update the channel state
@ -453,7 +434,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
int s3c2410_dma_enqueue(unsigned int channel, void *id,
dma_addr_t data, int size)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
struct s3c2410_dma_buf *buf;
unsigned long flags;
@ -804,7 +785,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
unsigned long flags;
if (chan == NULL)
@ -836,7 +817,7 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
chan->irq_claimed = 0;
if (!(channel & DMACH_LOW_LEVEL))
dma_chan_map[channel] = NULL;
s3c_dma_chan_map[channel] = NULL;
local_irq_restore(flags);
@ -995,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
int
s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
@ -1038,14 +1019,13 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
/* s3c2410_dma_config
*
* xfersize: size of unit in bytes (1,2,4)
* dcon: base value of the DCONx register
*/
int s3c2410_dma_config(unsigned int channel,
int xferunit,
int dcon)
int xferunit)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
unsigned int dcon;
pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
__func__, channel, xferunit, dcon);
@ -1055,10 +1035,33 @@ int s3c2410_dma_config(unsigned int channel,
pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
dcon |= chan->dcon & dma_sel.dcon_mask;
dcon = chan->dcon & dma_sel.dcon_mask;
pr_debug("%s: New dcon is %08x\n", __func__, dcon);
switch (chan->req_ch) {
case DMACH_I2S_IN:
case DMACH_I2S_OUT:
case DMACH_PCM_IN:
case DMACH_PCM_OUT:
case DMACH_MIC_IN:
default:
dcon |= S3C2410_DCON_HANDSHAKE;
dcon |= S3C2410_DCON_SYNC_PCLK;
break;
case DMACH_SDI:
/* note, ensure if need HANDSHAKE or not */
dcon |= S3C2410_DCON_SYNC_PCLK;
break;
case DMACH_XD0:
case DMACH_XD1:
dcon |= S3C2410_DCON_HANDSHAKE;
dcon |= S3C2410_DCON_SYNC_HCLK;
break;
}
switch (xferunit) {
case 1:
dcon |= S3C2410_DCON_BYTE;
@ -1090,58 +1093,6 @@ int s3c2410_dma_config(unsigned int channel,
EXPORT_SYMBOL(s3c2410_dma_config);
int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
if (chan == NULL)
return -EINVAL;
pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
chan->flags = flags;
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_setflags);
/* do we need to protect the settings of the fields from
* irq?
*/
int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
if (chan == NULL)
return -EINVAL;
pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
chan->op_fn = rtn;
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_set_opfn);
int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
if (chan == NULL)
return -EINVAL;
pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
chan->callback_fn = rtn;
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
/* s3c2410_dma_devconfig
*
@ -1150,29 +1101,38 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
* source: S3C2410_DMASRC_HW: source is hardware
* S3C2410_DMASRC_MEM: source is memory
*
* hwcfg: the value for xxxSTCn register,
* bit 0: 0=increment pointer, 1=leave pointer
* bit 1: 0=source is AHB, 1=source is APB
*
* devaddr: physical address of the source
*/
int s3c2410_dma_devconfig(int channel,
enum s3c2410_dmasrc source,
int hwcfg,
unsigned long devaddr)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
unsigned int hwcfg;
if (chan == NULL)
return -EINVAL;
pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
__func__, (int)source, hwcfg, devaddr);
pr_debug("%s: source=%d, devaddr=%08lx\n",
__func__, (int)source, devaddr);
chan->source = source;
chan->dev_addr = devaddr;
chan->hw_cfg = hwcfg;
switch (chan->req_ch) {
case DMACH_XD0:
case DMACH_XD1:
hwcfg = 0; /* AHB */
break;
default:
hwcfg = S3C2410_DISRCC_APB;
}
/* always assume our peripheral desintation is a fixed
* address in memory. */
hwcfg |= S3C2410_DISRCC_INC;
switch (source) {
case S3C2410_DMASRC_HW:
@ -1219,7 +1179,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
@ -1278,8 +1238,8 @@ static int s3c2410_dma_resume(struct sys_device *dev)
printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
s3c2410_dma_config(no, cp->xfer_unit);
s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
/* re-select the dma source for this channel */
@ -1476,7 +1436,8 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
found:
dmach = &s3c2410_chans[ch];
dmach->map = ch_map;
dma_chan_map[channel] = dmach;
dmach->req_ch = channel;
s3c_dma_chan_map[channel] = dmach;
/* select the channel */

View File

@ -183,35 +183,19 @@ EXPORT_SYMBOL(s3c2410_modify_misccr);
int s3c2410_gpio_getirq(unsigned int pin)
{
if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
return -1; /* not valid interrupts */
if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
return -EINVAL; /* not valid interrupts */
if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
return -1; /* not valid pin */
if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
return -EINVAL; /* not valid pin */
if (pin < S3C2410_GPF4)
return (pin - S3C2410_GPF0) + IRQ_EINT0;
if (pin < S3C2410_GPF(4))
return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
if (pin < S3C2410_GPG0)
return (pin - S3C2410_GPF4) + IRQ_EINT4;
if (pin < S3C2410_GPG(0))
return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
return (pin - S3C2410_GPG0) + IRQ_EINT8;
return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
}
EXPORT_SYMBOL(s3c2410_gpio_getirq);
int s3c2410_gpio_irq2pin(unsigned int irq)
{
if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
return S3C2410_GPF0 + (irq - IRQ_EINT0);
if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
return S3C2410_GPF4 + (irq - IRQ_EINT4);
if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
return S3C2410_GPG0 + (irq - IRQ_EINT8);
return -EINVAL;
}
EXPORT_SYMBOL(s3c2410_gpio_irq2pin);

View File

@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/sysdev.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/gpio.h>
@ -22,6 +23,7 @@
#include <mach/gpio-core.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <plat/pm.h>
#include <mach/regs-gpio.h>
@ -77,9 +79,10 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
struct s3c_gpio_chip s3c24xx_gpios[] = {
[0] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPA0),
.base = S3C2410_GPACON,
.pm = __gpio_pm(&s3c_gpio_pm_1bit),
.chip = {
.base = S3C2410_GPA0,
.base = S3C2410_GPA(0),
.owner = THIS_MODULE,
.label = "GPIOA",
.ngpio = 24,
@ -88,45 +91,50 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
},
},
[1] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPB0),
.base = S3C2410_GPBCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPB0,
.base = S3C2410_GPB(0),
.owner = THIS_MODULE,
.label = "GPIOB",
.ngpio = 16,
},
},
[2] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPC0),
.base = S3C2410_GPCCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPC0,
.base = S3C2410_GPC(0),
.owner = THIS_MODULE,
.label = "GPIOC",
.ngpio = 16,
},
},
[3] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPD0),
.base = S3C2410_GPDCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPD0,
.base = S3C2410_GPD(0),
.owner = THIS_MODULE,
.label = "GPIOD",
.ngpio = 16,
},
},
[4] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPE0),
.base = S3C2410_GPECON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPE0,
.base = S3C2410_GPE(0),
.label = "GPIOE",
.owner = THIS_MODULE,
.ngpio = 16,
},
},
[5] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPF0),
.base = S3C2410_GPFCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPF0,
.base = S3C2410_GPF(0),
.owner = THIS_MODULE,
.label = "GPIOF",
.ngpio = 8,
@ -134,14 +142,24 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
},
},
[6] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPG0),
.base = S3C2410_GPGCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPG0,
.base = S3C2410_GPG(0),
.owner = THIS_MODULE,
.label = "GPIOG",
.ngpio = 10,
.ngpio = 16,
.to_irq = s3c24xx_gpiolib_bankg_toirq,
},
}, {
.base = S3C2410_GPHCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPH(0),
.owner = THIS_MODULE,
.label = "GPIOH",
.ngpio = 11,
},
},
};
@ -156,4 +174,4 @@ static __init int s3c24xx_gpiolib_init(void)
return 0;
}
arch_initcall(s3c24xx_gpiolib_init);
core_initcall(s3c24xx_gpiolib_init);

View File

@ -1,4 +1,4 @@
/* linux/include/asm-arm/plat-s3c24xx/dma.h
/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
*
* Copyright (C) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@ -10,8 +10,10 @@
* published by the Free Software Foundation.
*/
#include <plat/dma-core.h>
extern struct sysdev_class dma_sysclass;
extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
#define DMA_CH_VALID (1<<31)
#define DMA_CH_NEVER (1<<30)
@ -31,8 +33,8 @@ struct s3c24xx_dma_map {
const char *name;
struct s3c24xx_dma_addr hw_addr;
unsigned long channels[S3C2410_DMA_CHANNELS];
unsigned long channels_rx[S3C2410_DMA_CHANNELS];
unsigned long channels[S3C_DMA_CHANNELS];
unsigned long channels_rx[S3C_DMA_CHANNELS];
};
struct s3c24xx_dma_selection {
@ -58,7 +60,7 @@ extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
*/
struct s3c24xx_dma_order_ch {
unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */
unsigned int list[S3C_DMA_CHANNELS]; /* list of channels */
unsigned int flags; /* flags */
};

View File

@ -58,7 +58,6 @@
#define S3C24XX_SZ_SPI SZ_1M
#define S3C24XX_SZ_SDI SZ_1M
#define S3C24XX_SZ_NAND SZ_1M
#define S3C24XX_SZ_USBHOST SZ_1M
/* GPIO ports */

View File

@ -57,3 +57,8 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
s3c_irqwake_eintmask);
}
static inline void s3c_pm_arch_update_uart(void __iomem *regs,
struct pm_uart_save *save)
{
}

View File

@ -0,0 +1,145 @@
/* arch/arm/mach-s3c2410/include/mach/dma.h
*
* Copyright (C) 2003,2004,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C24XX DMA support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* DMA Register definitions */
#define S3C2410_DMA_DISRC (0x00)
#define S3C2410_DMA_DISRCC (0x04)
#define S3C2410_DMA_DIDST (0x08)
#define S3C2410_DMA_DIDSTC (0x0C)
#define S3C2410_DMA_DCON (0x10)
#define S3C2410_DMA_DSTAT (0x14)
#define S3C2410_DMA_DCSRC (0x18)
#define S3C2410_DMA_DCDST (0x1C)
#define S3C2410_DMA_DMASKTRIG (0x20)
#define S3C2412_DMA_DMAREQSEL (0x24)
#define S3C2443_DMA_DMAREQSEL (0x24)
#define S3C2410_DISRCC_INC (1<<0)
#define S3C2410_DISRCC_APB (1<<1)
#define S3C2410_DMASKTRIG_STOP (1<<2)
#define S3C2410_DMASKTRIG_ON (1<<1)
#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
#define S3C2410_DCON_DEMAND (0<<31)
#define S3C2410_DCON_HANDSHAKE (1<<31)
#define S3C2410_DCON_SYNC_PCLK (0<<30)
#define S3C2410_DCON_SYNC_HCLK (1<<30)
#define S3C2410_DCON_INTREQ (1<<29)
#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
#define S3C2410_DCON_CH0_UART0 (1<<24)
#define S3C2410_DCON_CH0_SDI (2<<24)
#define S3C2410_DCON_CH0_TIMER (3<<24)
#define S3C2410_DCON_CH0_USBEP1 (4<<24)
#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
#define S3C2410_DCON_CH1_UART1 (1<<24)
#define S3C2410_DCON_CH1_I2SSDI (2<<24)
#define S3C2410_DCON_CH1_SPI (3<<24)
#define S3C2410_DCON_CH1_USBEP2 (4<<24)
#define S3C2410_DCON_CH2_I2SSDO (0<<24)
#define S3C2410_DCON_CH2_I2SSDI (1<<24)
#define S3C2410_DCON_CH2_SDI (2<<24)
#define S3C2410_DCON_CH2_TIMER (3<<24)
#define S3C2410_DCON_CH2_USBEP3 (4<<24)
#define S3C2410_DCON_CH3_UART2 (0<<24)
#define S3C2410_DCON_CH3_SDI (1<<24)
#define S3C2410_DCON_CH3_SPI (2<<24)
#define S3C2410_DCON_CH3_TIMER (3<<24)
#define S3C2410_DCON_CH3_USBEP4 (4<<24)
#define S3C2410_DCON_SRCSHIFT (24)
#define S3C2410_DCON_SRCMASK (7<<24)
#define S3C2410_DCON_BYTE (0<<20)
#define S3C2410_DCON_HALFWORD (1<<20)
#define S3C2410_DCON_WORD (2<<20)
#define S3C2410_DCON_AUTORELOAD (0<<22)
#define S3C2410_DCON_NORELOAD (1<<22)
#define S3C2410_DCON_HWTRIG (1<<23)
#ifdef CONFIG_CPU_S3C2440
#define S3C2440_DIDSTC_CHKINT (1<<2)
#define S3C2440_DCON_CH0_I2SSDO (5<<24)
#define S3C2440_DCON_CH0_PCMIN (6<<24)
#define S3C2440_DCON_CH1_PCMOUT (5<<24)
#define S3C2440_DCON_CH1_SDI (6<<24)
#define S3C2440_DCON_CH2_PCMIN (5<<24)
#define S3C2440_DCON_CH2_MICIN (6<<24)
#define S3C2440_DCON_CH3_MICIN (5<<24)
#define S3C2440_DCON_CH3_PCMOUT (6<<24)
#endif
#ifdef CONFIG_CPU_S3C2412
#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
#define S3C2412_DMAREQSEL_HW (1)
#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
#endif
#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
#define S3C2443_DMAREQSEL_HW (1)
#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)

View File

@ -30,6 +30,7 @@
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
#include <linux/io.h>
@ -75,43 +76,10 @@ static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_CLKSLOW),
};
static struct gpio_sleep {
void __iomem *base;
unsigned int gpcon;
unsigned int gpdat;
unsigned int gpup;
} gpio_save[] = {
[0] = {
.base = S3C2410_GPACON,
},
[1] = {
.base = S3C2410_GPBCON,
},
[2] = {
.base = S3C2410_GPCCON,
},
[3] = {
.base = S3C2410_GPDCON,
},
[4] = {
.base = S3C2410_GPECON,
},
[5] = {
.base = S3C2410_GPFCON,
},
[6] = {
.base = S3C2410_GPGCON,
},
[7] = {
.base = S3C2410_GPHCON,
},
};
static struct sleep_save misc_save[] = {
SAVE_ITEM(S3C2410_DCLKCON),
};
/* s3c_pm_check_resume_pin
*
* check to see if the pin is configured correctly for sleep mode, and
@ -156,195 +124,15 @@ void s3c_pm_configure_extint(void)
* and then configure it as an input if it is not
*/
for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
}
for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
}
}
/* offsets for CON/DAT/UP registers */
#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON)
#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON)
#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON)
/* s3c_pm_save_gpios()
*
* Save the state of the GPIOs
*/
void s3c_pm_save_gpios(void)
{
struct gpio_sleep *gps = gpio_save;
unsigned int gpio;
for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
void __iomem *base = gps->base;
gps->gpcon = __raw_readl(base + OFFS_CON);
gps->gpdat = __raw_readl(base + OFFS_DAT);
if (gpio > 0)
gps->gpup = __raw_readl(base + OFFS_UP);
}
}
/* Test whether the given masked+shifted bits of an GPIO configuration
* are one of the SFN (special function) modes. */
static inline int is_sfn(unsigned long con)
{
return (con == 2 || con == 3);
}
/* Test if the given masked+shifted GPIO configuration is an input */
static inline int is_in(unsigned long con)
{
return con == 0;
}
/* Test if the given masked+shifted GPIO configuration is an output */
static inline int is_out(unsigned long con)
{
return con == 1;
}
/**
* s3c2410_pm_restore_gpio() - restore the given GPIO bank
* @index: The number of the GPIO bank being resumed.
* @gps: The sleep confgiuration for the bank.
*
* Restore one of the GPIO banks that was saved during suspend. This is
* not as simple as once thought, due to the possibility of glitches
* from the order that the CON and DAT registers are set in.
*
* The three states the pin can be are {IN,OUT,SFN} which gives us 9
* combinations of changes to check. Three of these, if the pin stays
* in the same configuration can be discounted. This leaves us with
* the following:
*
* { IN => OUT } Change DAT first
* { IN => SFN } Change CON first
* { OUT => SFN } Change CON first, so new data will not glitch
* { OUT => IN } Change CON first, so new data will not glitch
* { SFN => IN } Change CON first
* { SFN => OUT } Change DAT first, so new data will not glitch [1]
*
* We do not currently deal with the UP registers as these control
* weak resistors, so a small delay in change should not need to bring
* these into the calculations.
*
* [1] this assumes that writing to a pin DAT whilst in SFN will set the
* state for when it is next output.
*/
static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
{
void __iomem *base = gps->base;
unsigned long gps_gpcon = gps->gpcon;
unsigned long gps_gpdat = gps->gpdat;
unsigned long old_gpcon;
unsigned long old_gpdat;
unsigned long old_gpup = 0x0;
unsigned long gpcon;
int nr;
old_gpcon = __raw_readl(base + OFFS_CON);
old_gpdat = __raw_readl(base + OFFS_DAT);
if (base == S3C2410_GPACON) {
/* GPACON only has one bit per control / data and no PULLUPs.
* GPACON[x] = 0 => Output, 1 => SFN */
/* first set all SFN bits to SFN */
gpcon = old_gpcon | gps->gpcon;
__raw_writel(gpcon, base + OFFS_CON);
/* now set all the other bits */
__raw_writel(gps_gpdat, base + OFFS_DAT);
__raw_writel(gps_gpcon, base + OFFS_CON);
} else {
unsigned long old, new, mask;
unsigned long change_mask = 0x0;
old_gpup = __raw_readl(base + OFFS_UP);
/* Create a change_mask of all the items that need to have
* their CON value changed before their DAT value, so that
* we minimise the work between the two settings.
*/
for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
old = (old_gpcon & mask) >> nr;
new = (gps_gpcon & mask) >> nr;
/* If there is no change, then skip */
if (old == new)
continue;
/* If both are special function, then skip */
if (is_sfn(old) && is_sfn(new))
continue;
/* Change is IN => OUT, do not change now */
if (is_in(old) && is_out(new))
continue;
/* Change is SFN => OUT, do not change now */
if (is_sfn(old) && is_out(new))
continue;
/* We should now be at the case of IN=>SFN,
* OUT=>SFN, OUT=>IN, SFN=>IN. */
change_mask |= mask;
}
/* Write the new CON settings */
gpcon = old_gpcon & ~change_mask;
gpcon |= gps_gpcon & change_mask;
__raw_writel(gpcon, base + OFFS_CON);
/* Now change any items that require DAT,CON */
__raw_writel(gps_gpdat, base + OFFS_DAT);
__raw_writel(gps_gpcon, base + OFFS_CON);
__raw_writel(gps->gpup, base + OFFS_UP);
}
S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
}
/** s3c2410_pm_restore_gpios()
*
* Restore the state of the GPIOs
*/
void s3c_pm_restore_gpios(void)
{
struct gpio_sleep *gps = gpio_save;
int gpio;
for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
s3c2410_pm_restore_gpio(gpio, gps);
}
}
void s3c_pm_restore_core(void)
{

View File

@ -11,6 +11,7 @@
*/
#include <linux/kernel.h>
#include <linux/gpio.h>
struct platform_device;
@ -20,6 +21,6 @@ struct platform_device;
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
}

View File

@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
int enable)
{
if (enable) {
s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
s3c2410_gpio_pullup(S3C2410_GPE11, 0);
s3c2410_gpio_pullup(S3C2410_GPE13, 0);
s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
} else {
s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
s3c2410_gpio_pullup(S3C2410_GPE11, 1);
s3c2410_gpio_pullup(S3C2410_GPE12, 1);
s3c2410_gpio_pullup(S3C2410_GPE13, 1);
s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
}
}

View File

@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
int enable)
{
if (enable) {
s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
s3c2410_gpio_pullup(S3C2410_GPG5, 0);
s3c2410_gpio_pullup(S3C2410_GPG6, 0);
s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
} else {
s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
s3c2410_gpio_pullup(S3C2410_GPG5, 1);
s3c2410_gpio_pullup(S3C2410_GPG6, 1);
s3c2410_gpio_pullup(S3C2410_GPG7, 1);
s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
}
}

View File

@ -19,6 +19,7 @@ config PLAT_S3C64XX
select S3C_GPIO_PULL_UPDOWN
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
select USB_ARCH_HAS_OHCI
help
Base platform code for any Samsung S3C64XX device
@ -38,6 +39,10 @@ config CPU_S3C6400_CLOCK
Common clock support code for the S3C6400 that is shared
by other CPUs in the series, such as the S3C6410.
config S3C64XX_DMA
bool "S3C64XX DMA"
select S3C_DMA
# platform specific device setup
config S3C64XX_SETUP_I2C0
@ -59,4 +64,9 @@ config S3C64XX_SETUP_FB_24BPP
help
Common setup code for S3C64XX with an 24bpp RGB display helper.
config S3C64XX_SETUP_SDHCI_GPIO
bool
help
Common setup code for S3C64XX SDHCI GPIO configurations
endif

View File

@ -24,8 +24,19 @@ obj-y += gpiolib.o
obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o
obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o
# PM support
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_PM) += irq-pm.o
# DMA support
obj-$(CONFIG_S3C64XX_DMA) += dma.o
# Device setup
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o

View File

@ -27,6 +27,12 @@
#include <plat/devs.h>
#include <plat/clock.h>
struct clk clk_h2 = {
.name = "hclk2",
.id = -1,
.rate = 0,
};
struct clk clk_27m = {
.name = "clk_27m",
.id = -1,
@ -152,6 +158,18 @@ static struct clk init_clocks_disable[] = {
.parent = &clk_48m,
.enable = s3c64xx_sclk_ctrl,
.ctrlbit = S3C_CLKCON_SCLK_MMC2_48,
}, {
.name = "dma0",
.id = -1,
.parent = &clk_h,
.enable = s3c64xx_hclk_ctrl,
.ctrlbit = S3C_CLKCON_HCLK_DMA0,
}, {
.name = "dma1",
.id = -1,
.parent = &clk_h,
.enable = s3c64xx_hclk_ctrl,
.ctrlbit = S3C_CLKCON_HCLK_DMA1,
},
};
@ -246,6 +264,7 @@ static struct clk *clks[] __initdata = {
&clk_epll,
&clk_27m,
&clk_48m,
&clk_h2,
};
void __init s3c64xx_register_clocks(void)

View File

@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@ -101,9 +102,24 @@ static struct map_desc s3c_iodesc[] __initdata = {
.pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_WATCHDOG,
.pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
.length = SZ_4K,
.type = MT_DEVICE,
},
};
struct sysdev_class s3c64xx_sysclass = {
.name = "s3c64xx-core",
};
static struct sys_device s3c64xx_sysdev = {
.cls = &s3c64xx_sysclass,
};
/* read cpu identification code */
void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@ -115,5 +131,21 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
iotable_init(mach_desc, size);
idcode = __raw_readl(S3C_VA_SYS + 0x118);
if (!idcode) {
/* S3C6400 has the ID register in a different place,
* and needs a write before it can be read. */
__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
}
s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
}
static __init int s3c64xx_sysdev_init(void)
{
sysdev_class_register(&s3c64xx_sysclass);
return sysdev_register(&s3c64xx_sysdev);
}
core_initcall(s3c64xx_sysdev_init);

722
arch/arm/plat-s3c64xx/dma.c Normal file
View File

@ -0,0 +1,722 @@
/* linux/arch/arm/plat-s3c64xx/dma.c
*
* Copyright 2009 Openmoko, Inc.
* Copyright 2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C64XX DMA core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/dmapool.h>
#include <linux/sysdev.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <plat/dma-plat.h>
#include <plat/regs-sys.h>
#include <asm/hardware/pl080.h>
/* dma channel state information */
struct s3c64xx_dmac {
struct sys_device sysdev;
struct clk *clk;
void __iomem *regs;
struct s3c2410_dma_chan *channels;
enum dma_ch chanbase;
};
/* pool to provide LLI buffers */
static struct dma_pool *dma_pool;
/* Debug configuration and code */
static unsigned char debug_show_buffs = 0;
static void dbg_showchan(struct s3c2410_dma_chan *chan)
{
pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
chan->number,
readl(chan->regs + PL080_CH_SRC_ADDR),
readl(chan->regs + PL080_CH_DST_ADDR),
readl(chan->regs + PL080_CH_LLI),
readl(chan->regs + PL080_CH_CONTROL),
readl(chan->regs + PL080S_CH_CONTROL2),
readl(chan->regs + PL080S_CH_CONFIG));
}
static void show_lli(struct pl080s_lli *lli)
{
pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
lli, lli->src_addr, lli->dst_addr, lli->next_lli,
lli->control0, lli->control1);
}
static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
{
struct s3c64xx_dma_buff *ptr;
struct s3c64xx_dma_buff *end;
pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
chan->number, chan->next, chan->curr, chan->end);
ptr = chan->next;
end = chan->end;
if (debug_show_buffs) {
for (; ptr != NULL; ptr = ptr->next) {
pr_debug("DMA%d: %08x ",
chan->number, ptr->lli_dma);
show_lli(ptr->lli);
}
}
}
/* End of Debug */
static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
{
struct s3c2410_dma_chan *chan;
unsigned int start, offs;
start = 0;
if (channel >= DMACH_PCM1_TX)
start = 8;
for (offs = 0; offs < 8; offs++) {
chan = &s3c2410_chans[start + offs];
if (!chan->in_use)
goto found;
}
return NULL;
found:
s3c_dma_chan_map[channel] = chan;
return chan;
}
int s3c2410_dma_config(unsigned int channel, int xferunit)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
switch (xferunit) {
case 1:
chan->hw_width = 0;
break;
case 2:
chan->hw_width = 1;
break;
case 4:
chan->hw_width = 2;
break;
default:
printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
return -EINVAL;
}
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_config);
static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
struct pl080s_lli *lli,
dma_addr_t data, int size)
{
dma_addr_t src, dst;
u32 control0, control1;
switch (chan->source) {
case S3C2410_DMASRC_HW:
src = chan->dev_addr;
dst = data;
control0 = PL080_CONTROL_SRC_AHB2;
control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
control0 |= PL080_CONTROL_DST_INCR;
break;
case S3C2410_DMASRC_MEM:
src = data;
dst = chan->dev_addr;
control0 = PL080_CONTROL_DST_AHB2;
control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
control0 |= PL080_CONTROL_SRC_INCR;
break;
default:
BUG();
}
/* note, we do not currently setup any of the burst controls */
control1 = size >> chan->hw_width; /* size in no of xfers */
control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */
control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */
lli->src_addr = src;
lli->dst_addr = dst;
lli->next_lli = 0;
lli->control0 = control0;
lli->control1 = control1;
}
static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
struct pl080s_lli *lli)
{
void __iomem *regs = chan->regs;
pr_debug("%s: LLI %p => regs\n", __func__, lli);
show_lli(lli);
writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
writel(lli->next_lli, regs + PL080_CH_LLI);
writel(lli->control0, regs + PL080_CH_CONTROL);
writel(lli->control1, regs + PL080S_CH_CONTROL2);
}
static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
{
struct s3c64xx_dmac *dmac = chan->dmac;
u32 config;
u32 bit = chan->bit;
dbg_showchan(chan);
pr_debug("%s: clearing interrupts\n", __func__);
/* clear interrupts */
writel(bit, dmac->regs + PL080_TC_CLEAR);
writel(bit, dmac->regs + PL080_ERR_CLEAR);
pr_debug("%s: starting channel\n", __func__);
config = readl(chan->regs + PL080S_CH_CONFIG);
config |= PL080_CONFIG_ENABLE;
pr_debug("%s: writing config %08x\n", __func__, config);
writel(config, chan->regs + PL080S_CH_CONFIG);
return 0;
}
static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
{
u32 config;
int timeout;
pr_debug("%s: stopping channel\n", __func__);
dbg_showchan(chan);
config = readl(chan->regs + PL080S_CH_CONFIG);
config |= PL080_CONFIG_HALT;
writel(config, chan->regs + PL080S_CH_CONFIG);
timeout = 1000;
do {
config = readl(chan->regs + PL080S_CH_CONFIG);
pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
if (config & PL080_CONFIG_ACTIVE)
udelay(10);
else
break;
} while (--timeout > 0);
if (config & PL080_CONFIG_ACTIVE) {
printk(KERN_ERR "%s: channel still active\n", __func__);
return -EFAULT;
}
config = readl(chan->regs + PL080S_CH_CONFIG);
config &= ~PL080_CONFIG_ENABLE;
writel(config, chan->regs + PL080S_CH_CONFIG);
return 0;
}
static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
struct s3c64xx_dma_buff *buf,
enum s3c2410_dma_buffresult result)
{
if (chan->callback_fn != NULL)
(chan->callback_fn)(chan, buf->pw, 0, result);
}
static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
{
dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
kfree(buff);
}
static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
{
struct s3c64xx_dma_buff *buff, *next;
u32 config;
dbg_showchan(chan);
pr_debug("%s: flushing channel\n", __func__);
config = readl(chan->regs + PL080S_CH_CONFIG);
config &= ~PL080_CONFIG_ENABLE;
writel(config, chan->regs + PL080S_CH_CONFIG);
/* dump all the buffers associated with this channel */
for (buff = chan->curr; buff != NULL; buff = next) {
next = buff->next;
pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
s3c64xx_dma_freebuff(buff);
}
chan->curr = chan->next = chan->end = NULL;
return 0;
}
int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
WARN_ON(!chan);
if (!chan)
return -EINVAL;
switch (op) {
case S3C2410_DMAOP_START:
return s3c64xx_dma_start(chan);
case S3C2410_DMAOP_STOP:
return s3c64xx_dma_stop(chan);
case S3C2410_DMAOP_FLUSH:
return s3c64xx_dma_flush(chan);
/* belive PAUSE/RESUME are no-ops */
case S3C2410_DMAOP_PAUSE:
case S3C2410_DMAOP_RESUME:
case S3C2410_DMAOP_STARTED:
case S3C2410_DMAOP_TIMEOUT:
return 0;
}
return -ENOENT;
}
EXPORT_SYMBOL(s3c2410_dma_ctrl);
/* s3c2410_dma_enque
*
*/
int s3c2410_dma_enqueue(unsigned int channel, void *id,
dma_addr_t data, int size)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
struct s3c64xx_dma_buff *next;
struct s3c64xx_dma_buff *buff;
struct pl080s_lli *lli;
int ret;
WARN_ON(!chan);
if (!chan)
return -EINVAL;
buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
if (!buff) {
printk(KERN_ERR "%s: no memory for buffer\n", __func__);
return -ENOMEM;
}
lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
if (!lli) {
printk(KERN_ERR "%s: no memory for lli\n", __func__);
ret = -ENOMEM;
goto err_buff;
}
pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
__func__, buff, data, lli, (u32)buff->lli_dma, size);
buff->lli = lli;
buff->pw = id;
s3c64xx_dma_fill_lli(chan, lli, data, size);
if ((next = chan->next) != NULL) {
struct s3c64xx_dma_buff *end = chan->end;
struct pl080s_lli *endlli = end->lli;
pr_debug("enquing onto channel\n");
end->next = buff;
endlli->next_lli = buff->lli_dma;
if (chan->flags & S3C2410_DMAF_CIRCULAR) {
struct s3c64xx_dma_buff *curr = chan->curr;
lli->next_lli = curr->lli_dma;
}
if (next == chan->curr) {
writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
chan->next = buff;
}
show_lli(endlli);
chan->end = buff;
} else {
pr_debug("enquing onto empty channel\n");
chan->curr = buff;
chan->next = buff;
chan->end = buff;
s3c64xx_lli_to_regs(chan, lli);
}
show_lli(lli);
dbg_showchan(chan);
dbg_showbuffs(chan);
return 0;
err_buff:
kfree(buff);
return ret;
}
EXPORT_SYMBOL(s3c2410_dma_enqueue);
int s3c2410_dma_devconfig(int channel,
enum s3c2410_dmasrc source,
unsigned long devaddr)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
u32 peripheral;
u32 config = 0;
pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
__func__, channel, source, devaddr, chan);
WARN_ON(!chan);
if (!chan)
return -EINVAL;
peripheral = (chan->peripheral & 0xf);
chan->source = source;
chan->dev_addr = devaddr;
pr_debug("%s: peripheral %d\n", __func__, peripheral);
switch (source) {
case S3C2410_DMASRC_HW:
config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
break;
case S3C2410_DMASRC_MEM:
config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
break;
default:
printk(KERN_ERR "%s: bad source\n", __func__);
return -EINVAL;
}
/* allow TC and ERR interrupts */
config |= PL080_CONFIG_TC_IRQ_MASK;
config |= PL080_CONFIG_ERR_IRQ_MASK;
pr_debug("%s: config %08x\n", __func__, config);
writel(config, chan->regs + PL080S_CH_CONFIG);
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_devconfig);
int s3c2410_dma_getposition(unsigned int channel,
dma_addr_t *src, dma_addr_t *dst)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
WARN_ON(!chan);
if (!chan)
return -EINVAL;
if (src != NULL)
*src = readl(chan->regs + PL080_CH_SRC_ADDR);
if (dst != NULL)
*dst = readl(chan->regs + PL080_CH_DST_ADDR);
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_getposition);
/* s3c2410_request_dma
*
* get control of an dma channel
*/
int s3c2410_dma_request(unsigned int channel,
struct s3c2410_dma_client *client,
void *dev)
{
struct s3c2410_dma_chan *chan;
unsigned long flags;
pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
channel, client->name, dev);
local_irq_save(flags);
chan = s3c64xx_dma_map_channel(channel);
if (chan == NULL) {
local_irq_restore(flags);
return -EBUSY;
}
dbg_showchan(chan);
chan->client = client;
chan->in_use = 1;
chan->peripheral = channel;
local_irq_restore(flags);
/* need to setup */
pr_debug("%s: channel initialised, %p\n", __func__, chan);
return chan->number | DMACH_LOW_LEVEL;
}
EXPORT_SYMBOL(s3c2410_dma_request);
/* s3c2410_dma_free
*
* release the given channel back to the system, will stop and flush
* any outstanding transfers, and ensure the channel is ready for the
* next claimant.
*
* Note, although a warning is currently printed if the freeing client
* info is not the same as the registrant's client info, the free is still
* allowed to go through.
*/
int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
unsigned long flags;
if (chan == NULL)
return -EINVAL;
local_irq_save(flags);
if (chan->client != client) {
printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
channel, chan->client, client);
}
/* sort out stopping and freeing the channel */
chan->client = NULL;
chan->in_use = 0;
if (!(channel & DMACH_LOW_LEVEL))
s3c_dma_chan_map[channel] = NULL;
local_irq_restore(flags);
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_free);
static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
{
struct s3c2410_dma_chan *chan = dmac->channels + offs;
/* note, we currently do not bother to work out which buffer
* or buffers have been completed since the last tc-irq. */
if (chan->callback_fn)
(chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
}
static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
{
printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
}
static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
{
struct s3c64xx_dmac *dmac = pw;
u32 tcstat, errstat;
u32 bit;
int offs;
tcstat = readl(dmac->regs + PL080_TC_STATUS);
errstat = readl(dmac->regs + PL080_ERR_STATUS);
for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
if (tcstat & bit) {
writel(bit, dmac->regs + PL080_TC_CLEAR);
s3c64xx_dma_tcirq(dmac, offs);
}
if (errstat & bit) {
s3c64xx_dma_errirq(dmac, offs);
writel(bit, dmac->regs + PL080_ERR_CLEAR);
}
}
return IRQ_HANDLED;
}
static struct sysdev_class dma_sysclass = {
.name = "s3c64xx-dma",
};
static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
int irq, unsigned int base)
{
struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
struct s3c64xx_dmac *dmac;
char clkname[16];
void __iomem *regs;
void __iomem *regptr;
int err, ch;
dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
if (!dmac) {
printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
return -ENOMEM;
}
dmac->sysdev.id = chno / 8;
dmac->sysdev.cls = &dma_sysclass;
err = sysdev_register(&dmac->sysdev);
if (err) {
printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
goto err_alloc;
}
regs = ioremap(base, 0x200);
if (!regs) {
printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
err = -ENXIO;
goto err_dev;
}
snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
dmac->clk = clk_get(NULL, clkname);
if (IS_ERR(dmac->clk)) {
printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
err = PTR_ERR(dmac->clk);
goto err_map;
}
clk_enable(dmac->clk);
dmac->regs = regs;
dmac->chanbase = chbase;
dmac->channels = chptr;
err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
if (err < 0) {
printk(KERN_ERR "%s: failed to get irq\n", __func__);
goto err_clk;
}
regptr = regs + PL080_Cx_BASE(0);
for (ch = 0; ch < 8; ch++, chno++, chptr++) {
printk(KERN_INFO "%s: registering DMA %d (%p)\n",
__func__, chno, regptr);
chptr->bit = 1 << ch;
chptr->number = chno;
chptr->dmac = dmac;
chptr->regs = regptr;
regptr += PL008_Cx_STRIDE;
}
/* for the moment, permanently enable the controller */
writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
return 0;
err_clk:
clk_disable(dmac->clk);
clk_put(dmac->clk);
err_map:
iounmap(regs);
err_dev:
sysdev_unregister(&dmac->sysdev);
err_alloc:
kfree(dmac);
return err;
}
static int __init s3c64xx_dma_init(void)
{
int ret;
printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
if (!dma_pool) {
printk(KERN_ERR "%s: failed to create pool\n", __func__);
return -ENOMEM;
}
ret = sysdev_class_register(&dma_sysclass);
if (ret) {
printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
return -ENOMEM;
}
/* Set all DMA configuration to be DMA, not SDMA */
writel(0xffffff, S3C_SYSREG(0x110));
/* Register standard DMA controlers */
s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
return 0;
}
arch_initcall(s3c64xx_dma_init);

View File

@ -385,12 +385,19 @@ static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
{
chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
}
static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
{
chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
}
static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
{
chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
}
static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
@ -412,7 +419,8 @@ static __init int s3c64xx_gpiolib_init(void)
s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
s3c64xx_gpiolib_add_4bit2);
s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL);
s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
s3c64xx_gpiolib_add_2bit);
return 0;
}

View File

@ -0,0 +1,70 @@
/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
*
* Copyright 2009 Openmoko, Inc.
* Copyright 2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C64XX DMA core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
struct s3c64xx_dma_buff;
/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
* @next: Pointer to next buffer in queue or ring.
* @pw: Client provided identifier
* @lli: Pointer to hardware descriptor this buffer is associated with.
* @lli_dma: Hardare address of the descriptor.
*/
struct s3c64xx_dma_buff {
struct s3c64xx_dma_buff *next;
void *pw;
struct pl080_lli *lli;
dma_addr_t lli_dma;
};
struct s3c64xx_dmac;
struct s3c2410_dma_chan {
unsigned char number; /* number of this dma channel */
unsigned char in_use; /* channel allocated */
unsigned char bit; /* bit for enable/disable/etc */
unsigned char hw_width;
unsigned char peripheral;
unsigned int flags;
enum s3c2410_dmasrc source;
dma_addr_t dev_addr;
struct s3c2410_dma_client *client;
struct s3c64xx_dmac *dmac; /* pointer to controller */
void __iomem *regs;
/* cdriver callbacks */
s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
s3c2410_dma_opfn_t op_fn; /* channel op callback */
/* buffer list and information */
struct s3c64xx_dma_buff *curr; /* current dma buffer */
struct s3c64xx_dma_buff *next; /* next buffer to load */
struct s3c64xx_dma_buff *end; /* end of queue */
/* note, when channel is running in circular mode, curr is the
* first buffer enqueued, end is the last and curr is where the
* last buffer-done event is set-at. The buffers are not freed
* and the last buffer hardware descriptor points back to the
* first.
*/
};
#include <plat/dma-core.h>

View File

@ -157,6 +157,7 @@
#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
#define IRQ_EINT(x) S3C_EINT(x)
#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0))
/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
* that they are sourced from the GPIO pins but with a different scheme for

Some files were not shown because too many files have changed in this diff Show More