ARM: dts: Add bosch acc board
Add device tree for the Bosch ACC board, based on i.MX6 Dual. Signed-off-by: Philip Oberfichtner <pro@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Philip Oberfichtner
Shawn Guo
parent
1c4f01be34
commit
6192cf8ac0
|
|
@ -549,6 +549,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
|||
imx6q-b450v3.dtb \
|
||||
imx6q-b650v3.dtb \
|
||||
imx6q-b850v3.dtb \
|
||||
imx6q-bosch-acc.dtb \
|
||||
imx6q-cm-fx6.dtb \
|
||||
imx6q-cubox-i.dtb \
|
||||
imx6q-cubox-i-emmc-som-v15.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,779 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Support for the i.MX6-based Bosch ACC board.
|
||||
*
|
||||
* Copyright (C) 2016 Garz & Fricke GmbH
|
||||
* Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de>
|
||||
* Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de>
|
||||
* Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com>
|
||||
* Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "imx6q.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Bosch ACC";
|
||||
compatible = "bosch,imx6q-acc", "fsl,imx6q";
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c1;
|
||||
i2c1 = &i2c2;
|
||||
i2c2 = &i2c3;
|
||||
mmc0 = &usdhc4;
|
||||
mmc1 = &usdhc2;
|
||||
serial0 = &uart2;
|
||||
serial1 = &uart1;
|
||||
};
|
||||
|
||||
memory@10000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x10000000 0x40000000>;
|
||||
};
|
||||
|
||||
backlight_lvds: backlight-lvds {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 200000>;
|
||||
brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
|
||||
num-interpolated-steps = <10>;
|
||||
default-brightness-level = <60>;
|
||||
power-supply = <®_lcd>;
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "dataimage,fg1001l0dsswmg01";
|
||||
backlight = <&backlight_lvds>;
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
refclk: refclk {
|
||||
compatible = "fixed-factor-clock";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&clks IMX6QDL_CLK_CKO2>;
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clock-output-names = "12mhz_refclk";
|
||||
assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
|
||||
<&clks IMX6QDL_CLK_CKO2>,
|
||||
<&clks IMX6QDL_CLK_CKO2_SEL>;
|
||||
assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
|
||||
<&clks IMX6QDL_CLK_CKO2_PODF>,
|
||||
<&clks IMX6QDL_CLK_OSC>;
|
||||
assigned-clock-rates = <0>, <12000000>, <0>;
|
||||
};
|
||||
|
||||
cpus {
|
||||
cpu0: cpu@0 {
|
||||
operating-points = <
|
||||
/* kHz uV */
|
||||
1200000 1275000
|
||||
996000 1225000
|
||||
852000 1225000
|
||||
792000 1150000
|
||||
396000 950000
|
||||
>;
|
||||
fsl,soc-operating-points = <
|
||||
/* ARM kHz SOC-PU uV */
|
||||
1200000 1225000
|
||||
996000 1175000
|
||||
852000 1175000
|
||||
792000 1150000
|
||||
396000 1150000
|
||||
>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
operating-points = <
|
||||
/* kHz uV */
|
||||
1200000 1275000
|
||||
996000 1225000
|
||||
852000 1225000
|
||||
792000 1150000
|
||||
396000 950000
|
||||
>;
|
||||
fsl,soc-operating-points = <
|
||||
/* ARM kHz SOC-PU uV */
|
||||
1200000 1225000
|
||||
996000 1175000
|
||||
852000 1175000
|
||||
792000 1150000
|
||||
396000 1150000
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm-leds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
led_red: led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
max-brightness = <248>;
|
||||
default-state = "off";
|
||||
pwms = <&pwm2 0 500000>;
|
||||
};
|
||||
|
||||
led_white: led-1 {
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
max-brightness = <248>;
|
||||
default-state = "off";
|
||||
pwms = <&pwm3 0 500000>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_reset_gpio_led>;
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
reg_5p0: regulator-5p0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5p0";
|
||||
};
|
||||
|
||||
reg_vin: regulator-vin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VIN";
|
||||
regulator-min-microvolt = <4500000>;
|
||||
regulator-max-microvolt = <4500000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_5p0>;
|
||||
};
|
||||
|
||||
reg_usb_otg_vbus: regulator-usb-otg-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
reg_usb_h1_vbus: regulator-usb-h1-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_h1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_5p0>;
|
||||
};
|
||||
|
||||
reg_usb_h2_vbus: regulator-usb-h2-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_h2_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <®_5p0> ;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_vsnvs: regulator-vsnvs {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VSNVS_3V0";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_5p0>;
|
||||
};
|
||||
|
||||
reg_lcd: regulator-lcd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "LCD0 POWER";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_lcd_enable>;
|
||||
gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
reg_dac: regulator-dac {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vref_dac";
|
||||
regulator-min-microvolt = <20000>;
|
||||
regulator-max-microvolt = <20000>;
|
||||
vin-supply = <®_5p0> ;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
reg_sw4: regulator-sw4 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "SW4_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_5p0>;
|
||||
};
|
||||
|
||||
reg_sys: regulator-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "SYS_4V2";
|
||||
regulator-min-microvolt = <4200000>;
|
||||
regulator-max-microvolt = <4200000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_5p0>;
|
||||
};
|
||||
};
|
||||
|
||||
®_arm {
|
||||
vin-supply = <&sw2_reg>;
|
||||
};
|
||||
|
||||
®_soc {
|
||||
vin-supply = <&sw1c_reg>;
|
||||
};
|
||||
|
||||
®_vdd1p1 {
|
||||
vin-supply = <®_vsnvs>;
|
||||
};
|
||||
|
||||
®_vdd2p5 {
|
||||
vin-supply = <®_vsnvs>;
|
||||
};
|
||||
|
||||
®_vdd3p0 {
|
||||
vin-supply = <®_vsnvs>;
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet>;
|
||||
clocks = <&clks IMX6QDL_CLK_ENET>,
|
||||
<&clks IMX6QDL_CLK_ENET>,
|
||||
<&clks IMX6QDL_CLK_ENET>,
|
||||
<&clks IMX6QDL_CLK_ENET_REF>;
|
||||
clock-names = "ipg", "ahb", "ptp", "enet_out";
|
||||
phy-mode = "rmii";
|
||||
phy-supply = <®_sw4>;
|
||||
phy-handle = <ðphy>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ethphy: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
|
||||
smsc,disable-energy-detect;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu_vg {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&gpu_2d {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
pmic: pmic@8 {
|
||||
compatible = "fsl,pfuze100";
|
||||
reg = <0x08>;
|
||||
|
||||
regulators {
|
||||
sw1c_reg: sw1c {
|
||||
regulator-name = "VDD_SOC (sw1abc)";
|
||||
regulator-min-microvolt = <1275000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <6250>;
|
||||
};
|
||||
|
||||
sw2_reg: sw2 {
|
||||
regulator-name = "VDD_ARM (sw2)";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <6250>;
|
||||
};
|
||||
|
||||
sw3a_reg: sw3a {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "DDR_1V5a";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
|
||||
};
|
||||
|
||||
sw3b_reg: sw3b {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "DDR_1V5b";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
|
||||
};
|
||||
|
||||
sw4_reg: sw4 {
|
||||
regulator-name = "AUX 3V15 (sw4)";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
swbst_reg: swbst {
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5150000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
snvs_reg: vsnvs {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vref_reg: vrefddr {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen1_reg: vgen1 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1550000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen2_reg: vgen2 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1550000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen3_reg: vgen3 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen4_reg: vgen4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vgen5_reg: vgen5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vgen6_reg: vgen6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
lm75: sensor@49 {
|
||||
compatible = "national,lm75b";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_lm75>;
|
||||
reg = <0x49>;
|
||||
};
|
||||
|
||||
eeprom: eeprom@50 {
|
||||
compatible = "atmel,24c32";
|
||||
reg = <0x50>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
|
||||
rtc: rtc@51 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rtc>;
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
clock-frequency = <100000>;
|
||||
status = "okay";
|
||||
|
||||
eeprom_ext: eeprom@50 {
|
||||
compatible = "atmel,24c32";
|
||||
reg = <0x50>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
usb3503: usb@8 {
|
||||
compatible = "smsc,usb3503";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb3503>;
|
||||
reg = <0x08>;
|
||||
connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */
|
||||
intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */
|
||||
reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */
|
||||
initial-mode = <1>;
|
||||
clocks = <&refclk>;
|
||||
clock-names = "refclk";
|
||||
refclk-frequency = <12000000>;
|
||||
};
|
||||
|
||||
exc3000: touchscreen@2a {
|
||||
compatible = "eeti,exc3000";
|
||||
reg = <0x2a>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ctouch>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
||||
touchscreen-size-x = <4096>;
|
||||
touchscreen-size-y = <4096>;
|
||||
};
|
||||
|
||||
vcnl4035: light-sensor@60 {
|
||||
compatible = "vishay,vcnl4035";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_proximity>;
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
|
||||
&ldb {
|
||||
status = "okay";
|
||||
|
||||
lvds0: lvds-channel@0 {
|
||||
fsl,data-mapping = "spwg";
|
||||
fsl,data-width = <24>;
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
|
||||
lvds0_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
#pwm-cells = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
#pwm-cells = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm3 {
|
||||
#pwm-cells = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm4 {
|
||||
#pwm-cells = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
|
||||
linux,rs485-enabled-at-boot-time;
|
||||
rs485-rx-during-tx;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
vbus-supply = <®_usb_h1_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh2 {
|
||||
pinctrl-names = "idle", "active";
|
||||
pinctrl-0 = <&pinctrl_usbh2_idle>;
|
||||
pinctrl-1 = <&pinctrl_usbh2_active>;
|
||||
vbus-supply = <®_usb_h2_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg>;
|
||||
vbus-supply = <®_usb_otg_vbus>;
|
||||
disable-over-current;
|
||||
dr_mode = "otg";
|
||||
srp-disable;
|
||||
hnp-disable;
|
||||
adp-disable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphynop1 {
|
||||
clocks = <&clks IMX6QDL_CLK_USBPHY1>;
|
||||
clock-names = "main_clk";
|
||||
vcc-supply = <®_usb_h1_vbus>;
|
||||
};
|
||||
|
||||
&usbphynop2 {
|
||||
vcc-supply = <®_usb_h2_vbus>;
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
||||
no-1-8-v;
|
||||
keep-power-in-suspend;
|
||||
enable-sdio-wakeup;
|
||||
voltage-ranges = <3300 3300>;
|
||||
vmmc-supply = <®_sw4>;
|
||||
fsl,wp-controller;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc4>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
no-1-8-v;
|
||||
keep-power-in-suspend;
|
||||
voltage-ranges = <3300 3300>;
|
||||
vmmc-supply = <®_sw4>;
|
||||
fsl,wp-controller;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdog1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdog1>;
|
||||
fsl,ext-reset-output;
|
||||
timeout-sec=<10>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_enet: enetgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
||||
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
||||
MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
|
||||
MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 /* FEC INT */
|
||||
MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
|
||||
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098
|
||||
MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
|
||||
MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
|
||||
MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098
|
||||
MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098
|
||||
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_reset_gpio_led: reset-gpio-led-grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
|
||||
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810
|
||||
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_lcd_enable: lcdenablegrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* lcd enable */
|
||||
MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 /* sel6_8 */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_lm75: lm75grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_proximity: proximitygrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm1: pwm1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm2: pwm2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm3: pwm3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm4: pwm4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_rtc: rtc-grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ctouch: ctouch-grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */
|
||||
MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbh2_idle: usbh2-idle-grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018
|
||||
MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbh2_active: usbh2-active-grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018
|
||||
MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usb3503: usb3503-grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x00000018
|
||||
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* USB INT */
|
||||
MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */
|
||||
MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 /* USB Connect */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg: usbotggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017069
|
||||
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00010038
|
||||
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069
|
||||
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069
|
||||
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069
|
||||
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069
|
||||
MX6QDL_PAD_GPIO_4__SD2_CD_B 0x0001b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc4: usdhc4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x00017059
|
||||
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x00010059
|
||||
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059
|
||||
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059
|
||||
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059
|
||||
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059
|
||||
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059
|
||||
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059
|
||||
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059
|
||||
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wdog1: wdoggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
|
||||
>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue