MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h

Also update union octeon_cvmemctl with new OCTEON II fields.

[aleksey.makarov@auriga.com: use __BITFIELD_FIELD]

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8940/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
David Daney 2015-01-15 16:11:12 +03:00 committed by Ralf Baechle
parent 664d699af2
commit 664f1ae53d

View file

@ -9,6 +9,7 @@
#define __ASM_OCTEON_OCTEON_H
#include <asm/octeon/cvmx.h>
#include <asm/bitfield.h>
extern uint64_t octeon_bootmem_alloc_range_phys(uint64_t size,
uint64_t alignment,
@ -58,6 +59,7 @@ extern void octeon_io_clk_delay(unsigned long);
#define OCTOEN_SERIAL_LEN 20
struct octeon_boot_descriptor {
#ifdef __BIG_ENDIAN_BITFIELD
/* Start of block referenced by assembly code - do not change! */
uint32_t desc_version;
uint32_t desc_size;
@ -109,77 +111,149 @@ struct octeon_boot_descriptor {
uint8_t mac_addr_base[6];
uint8_t mac_addr_count;
uint64_t cvmx_desc_vaddr;
#else
uint32_t desc_size;
uint32_t desc_version;
uint64_t stack_top;
uint64_t heap_base;
uint64_t heap_end;
/* Only used by bootloader */
uint64_t entry_point;
uint64_t desc_vaddr;
/* End of This block referenced by assembly code - do not change! */
uint32_t stack_size;
uint32_t exception_base_addr;
uint32_t argc;
uint32_t heap_size;
/*
* Argc count for application.
* Warning low bit scrambled in little-endian.
*/
uint32_t argv[OCTEON_ARGV_MAX_ARGS];
#define BOOT_FLAG_INIT_CORE (1 << 0)
#define OCTEON_BL_FLAG_DEBUG (1 << 1)
#define OCTEON_BL_FLAG_NO_MAGIC (1 << 2)
/* If set, use uart1 for console */
#define OCTEON_BL_FLAG_CONSOLE_UART1 (1 << 3)
/* If set, use PCI console */
#define OCTEON_BL_FLAG_CONSOLE_PCI (1 << 4)
/* Call exit on break on serial port */
#define OCTEON_BL_FLAG_BREAK (1 << 5)
uint32_t core_mask;
uint32_t flags;
/* physical address of free memory descriptor block. */
uint32_t phy_mem_desc_addr;
/* DRAM size in megabyes. */
uint32_t dram_size;
/* CPU clock speed, in hz. */
uint32_t eclock_hz;
/* used to pass flags from app to debugger. */
uint32_t debugger_flags_base_addr;
/* SPI4 clock in hz. */
uint32_t spi_clock_hz;
/* DRAM clock speed, in hz. */
uint32_t dclock_hz;
uint8_t chip_rev_minor;
uint8_t chip_rev_major;
uint16_t chip_type;
uint8_t board_rev_minor;
uint8_t board_rev_major;
uint16_t board_type;
uint64_t unused1[4]; /* Not even filled in by bootloader. */
uint64_t cvmx_desc_vaddr;
#endif
};
union octeon_cvmemctl {
uint64_t u64;
struct {
/* RO 1 = BIST fail, 0 = BIST pass */
uint64_t tlbbist:1;
__BITFIELD_FIELD(uint64_t tlbbist:1,
/* RO 1 = BIST fail, 0 = BIST pass */
uint64_t l1cbist:1;
__BITFIELD_FIELD(uint64_t l1cbist:1,
/* RO 1 = BIST fail, 0 = BIST pass */
uint64_t l1dbist:1;
__BITFIELD_FIELD(uint64_t l1dbist:1,
/* RO 1 = BIST fail, 0 = BIST pass */
uint64_t dcmbist:1;
__BITFIELD_FIELD(uint64_t dcmbist:1,
/* RO 1 = BIST fail, 0 = BIST pass */
uint64_t ptgbist:1;
__BITFIELD_FIELD(uint64_t ptgbist:1,
/* RO 1 = BIST fail, 0 = BIST pass */
uint64_t wbfbist:1;
__BITFIELD_FIELD(uint64_t wbfbist:1,
/* Reserved */
uint64_t reserved:22;
__BITFIELD_FIELD(uint64_t reserved:17,
/* OCTEON II - TLB replacement policy: 0 = bitmask LRU; 1 = NLU.
* This field selects between the TLB replacement policies:
* bitmask LRU or NLU. Bitmask LRU maintains a mask of
* recently used TLB entries and avoids them as new entries
* are allocated. NLU simply guarantees that the next
* allocation is not the last used TLB entry. */
__BITFIELD_FIELD(uint64_t tlbnlu:1,
/* OCTEON II - Selects the bit in the counter used for
* releasing a PAUSE. This counter trips every 2(8+PAUSETIME)
* cycles. If not already released, the cnMIPS II core will
* always release a given PAUSE instruction within
* 2(8+PAUSETIME). If the counter trip happens to line up,
* the cnMIPS II core may release the PAUSE instantly. */
__BITFIELD_FIELD(uint64_t pausetime:3,
/* OCTEON II - This field is an extension of
* CvmMemCtl[DIDTTO] */
__BITFIELD_FIELD(uint64_t didtto2:1,
/* R/W If set, marked write-buffer entries time out
* the same as as other entries; if clear, marked
* write-buffer entries use the maximum timeout. */
uint64_t dismarkwblongto:1;
__BITFIELD_FIELD(uint64_t dismarkwblongto:1,
/* R/W If set, a merged store does not clear the
* write-buffer entry timeout state. */
uint64_t dismrgclrwbto:1;
__BITFIELD_FIELD(uint64_t dismrgclrwbto:1,
/* R/W Two bits that are the MSBs of the resultant
* CVMSEG LM word location for an IOBDMA. The other 8
* bits come from the SCRADDR field of the IOBDMA. */
uint64_t iobdmascrmsb:2;
__BITFIELD_FIELD(uint64_t iobdmascrmsb:2,
/* R/W If set, SYNCWS and SYNCS only order marked
* stores; if clear, SYNCWS and SYNCS only order
* unmarked stores. SYNCWSMARKED has no effect when
* DISSYNCWS is set. */
uint64_t syncwsmarked:1;
__BITFIELD_FIELD(uint64_t syncwsmarked:1,
/* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as
* SYNC. */
uint64_t dissyncws:1;
__BITFIELD_FIELD(uint64_t dissyncws:1,
/* R/W If set, no stall happens on write buffer
* full. */
uint64_t diswbfst:1;
__BITFIELD_FIELD(uint64_t diswbfst:1,
/* R/W If set (and SX set), supervisor-level
* loads/stores can use XKPHYS addresses with
* VA<48>==0 */
uint64_t xkmemenas:1;
__BITFIELD_FIELD(uint64_t xkmemenas:1,
/* R/W If set (and UX set), user-level loads/stores
* can use XKPHYS addresses with VA<48>==0 */
uint64_t xkmemenau:1;
__BITFIELD_FIELD(uint64_t xkmemenau:1,
/* R/W If set (and SX set), supervisor-level
* loads/stores can use XKPHYS addresses with
* VA<48>==1 */
uint64_t xkioenas:1;
__BITFIELD_FIELD(uint64_t xkioenas:1,
/* R/W If set (and UX set), user-level loads/stores
* can use XKPHYS addresses with VA<48>==1 */
uint64_t xkioenau:1;
__BITFIELD_FIELD(uint64_t xkioenau:1,
/* R/W If set, all stores act as SYNCW (NOMERGE must
* be set when this is set) RW, reset to 0. */
uint64_t allsyncw:1;
__BITFIELD_FIELD(uint64_t allsyncw:1,
/* R/W If set, no stores merge, and all stores reach
* the coherent bus in order. */
uint64_t nomerge:1;
__BITFIELD_FIELD(uint64_t nomerge:1,
/* R/W Selects the bit in the counter used for DID
* time-outs 0 = 231, 1 = 230, 2 = 229, 3 =
* 214. Actual time-out is between 1x and 2x this
* interval. For example, with DIDTTO=3, expiration
* interval is between 16K and 32K. */
uint64_t didtto:2;
__BITFIELD_FIELD(uint64_t didtto:2,
/* R/W If set, the (mem) CSR clock never turns off. */
uint64_t csrckalwys:1;
__BITFIELD_FIELD(uint64_t csrckalwys:1,
/* R/W If set, mclk never turns off. */
uint64_t mclkalwys:1;
__BITFIELD_FIELD(uint64_t mclkalwys:1,
/* R/W Selects the bit in the counter used for write
* buffer flush time-outs (WBFLT+11) is the bit
* position in an internal counter used to determine
@ -187,25 +261,26 @@ union octeon_cvmemctl {
* 2x this interval. For example, with WBFLT = 0, a
* write buffer expires between 2K and 4K cycles after
* the write buffer entry is allocated. */
uint64_t wbfltime:3;
__BITFIELD_FIELD(uint64_t wbfltime:3,
/* R/W If set, do not put Istream in the L2 cache. */
uint64_t istrnol2:1;
__BITFIELD_FIELD(uint64_t istrnol2:1,
/* R/W The write buffer threshold. */
uint64_t wbthresh:4;
__BITFIELD_FIELD(uint64_t wbthresh:4,
/* Reserved */
uint64_t reserved2:2;
__BITFIELD_FIELD(uint64_t reserved2:2,
/* R/W If set, CVMSEG is available for loads/stores in
* kernel/debug mode. */
uint64_t cvmsegenak:1;
__BITFIELD_FIELD(uint64_t cvmsegenak:1,
/* R/W If set, CVMSEG is available for loads/stores in
* supervisor mode. */
uint64_t cvmsegenas:1;
__BITFIELD_FIELD(uint64_t cvmsegenas:1,
/* R/W If set, CVMSEG is available for loads/stores in
* user mode. */
uint64_t cvmsegenau:1;
__BITFIELD_FIELD(uint64_t cvmsegenau:1,
/* R/W Size of local memory in cache blocks, 54 (6912
* bytes) is max legal value. */
uint64_t lmemsz:6;
__BITFIELD_FIELD(uint64_t lmemsz:6,
;)))))))))))))))))))))))))))))))))
} s;
};