mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-07 03:18:31 +00:00
Merge branch 'for_3.7/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into devel-dt
This commit is contained in:
commit
84eca270d7
30 changed files with 1221 additions and 91 deletions
|
@ -36,6 +36,9 @@ Boards:
|
||||||
- OMAP3 BeagleBoard : Low cost community board
|
- OMAP3 BeagleBoard : Low cost community board
|
||||||
compatible = "ti,omap3-beagle", "ti,omap3"
|
compatible = "ti,omap3-beagle", "ti,omap3"
|
||||||
|
|
||||||
|
- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
|
||||||
|
compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
|
||||||
|
|
||||||
- OMAP4 SDP : Software Developement Board
|
- OMAP4 SDP : Software Developement Board
|
||||||
compatible = "ti,omap4-sdp", "ti,omap4430"
|
compatible = "ti,omap4-sdp", "ti,omap4430"
|
||||||
|
|
||||||
|
|
|
@ -11,6 +11,11 @@ Required properties:
|
||||||
- interrupt-controller: Mark the device node as an interrupt controller
|
- interrupt-controller: Mark the device node as an interrupt controller
|
||||||
The first cell is the GPIO number.
|
The first cell is the GPIO number.
|
||||||
The second cell is not used.
|
The second cell is not used.
|
||||||
|
- ti,use-leds : Enables LEDA and LEDB outputs if set
|
||||||
|
- ti,debounce : if n-th bit is set, debounces GPIO-n
|
||||||
|
- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
|
||||||
|
- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
|
||||||
|
- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
|
||||||
|
|
||||||
Example:
|
Example:
|
||||||
|
|
||||||
|
@ -20,4 +25,5 @@ twl_gpio: gpio {
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
#interrupt-cells = <2>;
|
#interrupt-cells = <2>;
|
||||||
interrupt-controller;
|
interrupt-controller;
|
||||||
|
ti,use-leds;
|
||||||
};
|
};
|
||||||
|
|
|
@ -56,3 +56,4 @@ stm,m41t00 Serial Access TIMEKEEPER
|
||||||
stm,m41t62 Serial real-time clock (RTC) with alarm
|
stm,m41t62 Serial real-time clock (RTC) with alarm
|
||||||
stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
|
stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
|
||||||
ti,tsc2003 I2C Touch-Screen Controller
|
ti,tsc2003 I2C Touch-Screen Controller
|
||||||
|
ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
|
||||||
|
|
52
Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt
Normal file
52
Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt
Normal file
|
@ -0,0 +1,52 @@
|
||||||
|
* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
|
||||||
|
|
||||||
|
Required properties:
|
||||||
|
- compatible : Should be "jedec,lpddr2-timings"
|
||||||
|
- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
|
||||||
|
- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
|
||||||
|
|
||||||
|
Optional properties:
|
||||||
|
|
||||||
|
The following properties represent AC timing parameters from the memory
|
||||||
|
data-sheet of the device for a given speed-bin. All these properties are
|
||||||
|
of type <u32> and the default unit is ps (pico seconds). Parameters with
|
||||||
|
a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
|
||||||
|
- tRCD
|
||||||
|
- tWR
|
||||||
|
- tRAS-min
|
||||||
|
- tRRD
|
||||||
|
- tWTR
|
||||||
|
- tXP
|
||||||
|
- tRTP
|
||||||
|
- tDQSCK-max
|
||||||
|
- tFAW
|
||||||
|
- tZQCS
|
||||||
|
- tZQinit
|
||||||
|
- tRPab
|
||||||
|
- tZQCL
|
||||||
|
- tCKESR
|
||||||
|
- tRAS-max-ns
|
||||||
|
- tDQSCK-max-derated
|
||||||
|
|
||||||
|
Example:
|
||||||
|
|
||||||
|
timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
|
||||||
|
compatible = "jedec,lpddr2-timings";
|
||||||
|
min-freq = <10000000>;
|
||||||
|
max-freq = <400000000>;
|
||||||
|
tRPab = <21000>;
|
||||||
|
tRCD = <18000>;
|
||||||
|
tWR = <15000>;
|
||||||
|
tRAS-min = <42000>;
|
||||||
|
tRRD = <10000>;
|
||||||
|
tWTR = <7500>;
|
||||||
|
tXP = <7500>;
|
||||||
|
tRTP = <7500>;
|
||||||
|
tCKESR = <15000>;
|
||||||
|
tDQSCK-max = <5500>;
|
||||||
|
tFAW = <50000>;
|
||||||
|
tZQCS = <90000>;
|
||||||
|
tZQCL = <360000>;
|
||||||
|
tZQinit = <1000000>;
|
||||||
|
tRAS-max-ns = <70000>;
|
||||||
|
};
|
102
Documentation/devicetree/bindings/lpddr2/lpddr2.txt
Normal file
102
Documentation/devicetree/bindings/lpddr2/lpddr2.txt
Normal file
|
@ -0,0 +1,102 @@
|
||||||
|
* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2
|
||||||
|
|
||||||
|
Required properties:
|
||||||
|
- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2",
|
||||||
|
"jedec,lpddr2-s4"
|
||||||
|
|
||||||
|
"ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type
|
||||||
|
|
||||||
|
"ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type
|
||||||
|
|
||||||
|
"ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type
|
||||||
|
|
||||||
|
- density : <u32> representing density in Mb (Mega bits)
|
||||||
|
|
||||||
|
- io-width : <u32> representing bus width. Possible values are 8, 16, and 32
|
||||||
|
|
||||||
|
Optional properties:
|
||||||
|
|
||||||
|
The following optional properties represent the minimum value of some AC
|
||||||
|
timing parameters of the DDR device in terms of number of clock cycles.
|
||||||
|
These values shall be obtained from the device data-sheet.
|
||||||
|
- tRRD-min-tck
|
||||||
|
- tWTR-min-tck
|
||||||
|
- tXP-min-tck
|
||||||
|
- tRTP-min-tck
|
||||||
|
- tCKE-min-tck
|
||||||
|
- tRPab-min-tck
|
||||||
|
- tRCD-min-tck
|
||||||
|
- tWR-min-tck
|
||||||
|
- tRASmin-min-tck
|
||||||
|
- tCKESR-min-tck
|
||||||
|
- tFAW-min-tck
|
||||||
|
|
||||||
|
Child nodes:
|
||||||
|
- The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
|
||||||
|
"lpddr2-timings" provides AC timing parameters of the device for
|
||||||
|
a given speed-bin. The user may provide the timings for as many
|
||||||
|
speed-bins as is required. Please see Documentation/devicetree/
|
||||||
|
bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings"
|
||||||
|
|
||||||
|
Example:
|
||||||
|
|
||||||
|
elpida_ECB240ABACN : lpddr2 {
|
||||||
|
compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
|
||||||
|
density = <2048>;
|
||||||
|
io-width = <32>;
|
||||||
|
|
||||||
|
tRPab-min-tck = <3>;
|
||||||
|
tRCD-min-tck = <3>;
|
||||||
|
tWR-min-tck = <3>;
|
||||||
|
tRASmin-min-tck = <3>;
|
||||||
|
tRRD-min-tck = <2>;
|
||||||
|
tWTR-min-tck = <2>;
|
||||||
|
tXP-min-tck = <2>;
|
||||||
|
tRTP-min-tck = <2>;
|
||||||
|
tCKE-min-tck = <3>;
|
||||||
|
tCKESR-min-tck = <3>;
|
||||||
|
tFAW-min-tck = <8>;
|
||||||
|
|
||||||
|
timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
|
||||||
|
compatible = "jedec,lpddr2-timings";
|
||||||
|
min-freq = <10000000>;
|
||||||
|
max-freq = <400000000>;
|
||||||
|
tRPab = <21000>;
|
||||||
|
tRCD = <18000>;
|
||||||
|
tWR = <15000>;
|
||||||
|
tRAS-min = <42000>;
|
||||||
|
tRRD = <10000>;
|
||||||
|
tWTR = <7500>;
|
||||||
|
tXP = <7500>;
|
||||||
|
tRTP = <7500>;
|
||||||
|
tCKESR = <15000>;
|
||||||
|
tDQSCK-max = <5500>;
|
||||||
|
tFAW = <50000>;
|
||||||
|
tZQCS = <90000>;
|
||||||
|
tZQCL = <360000>;
|
||||||
|
tZQinit = <1000000>;
|
||||||
|
tRAS-max-ns = <70000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
|
||||||
|
compatible = "jedec,lpddr2-timings";
|
||||||
|
min-freq = <10000000>;
|
||||||
|
max-freq = <200000000>;
|
||||||
|
tRPab = <21000>;
|
||||||
|
tRCD = <18000>;
|
||||||
|
tWR = <15000>;
|
||||||
|
tRAS-min = <42000>;
|
||||||
|
tRRD = <10000>;
|
||||||
|
tWTR = <10000>;
|
||||||
|
tXP = <7500>;
|
||||||
|
tRTP = <7500>;
|
||||||
|
tCKESR = <15000>;
|
||||||
|
tDQSCK-max = <5500>;
|
||||||
|
tFAW = <50000>;
|
||||||
|
tZQCS = <90000>;
|
||||||
|
tZQCL = <360000>;
|
||||||
|
tZQinit = <1000000>;
|
||||||
|
tRAS-max-ns = <70000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
}
|
|
@ -0,0 +1,55 @@
|
||||||
|
* EMIF family of TI SDRAM controllers
|
||||||
|
|
||||||
|
EMIF - External Memory Interface - is an SDRAM controller used in
|
||||||
|
TI SoCs. EMIF supports, based on the IP revision, one or more of
|
||||||
|
DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance
|
||||||
|
of the EMIF IP and memory parts attached to it.
|
||||||
|
|
||||||
|
Required properties:
|
||||||
|
- compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
|
||||||
|
is the IP revision of the specific EMIF instance.
|
||||||
|
|
||||||
|
- phy-type : <u32> indicating the DDR phy type. Following are the
|
||||||
|
allowed values
|
||||||
|
<1> : Attila PHY
|
||||||
|
<2> : Intelli PHY
|
||||||
|
|
||||||
|
- device-handle : phandle to a "lpddr2" node representing the memory part
|
||||||
|
|
||||||
|
- ti,hwmods : For TI hwmods processing and omap device creation
|
||||||
|
the value shall be "emif<n>" where <n> is the number of the EMIF
|
||||||
|
instance with base 1.
|
||||||
|
|
||||||
|
Optional properties:
|
||||||
|
- cs1-used : Have this property if CS1 of this EMIF
|
||||||
|
instance has a memory part attached to it. If there is a memory
|
||||||
|
part attached to CS1, it should be the same type as the one on CS0,
|
||||||
|
so there is no need to give the details of this memory part.
|
||||||
|
|
||||||
|
- cal-resistor-per-cs : Have this property if the board has one
|
||||||
|
calibration resistor per chip-select.
|
||||||
|
|
||||||
|
- hw-caps-read-idle-ctrl: Have this property if the controller
|
||||||
|
supports read idle window programming
|
||||||
|
|
||||||
|
- hw-caps-dll-calib-ctrl: Have this property if the controller
|
||||||
|
supports dll calibration control
|
||||||
|
|
||||||
|
- hw-caps-ll-interface : Have this property if the controller
|
||||||
|
has a low latency interface and corresponding interrupt events
|
||||||
|
|
||||||
|
- hw-caps-temp-alert : Have this property if the controller
|
||||||
|
has capability for generating SDRAM temperature alerts
|
||||||
|
|
||||||
|
Example:
|
||||||
|
|
||||||
|
emif1: emif@0x4c000000 {
|
||||||
|
compatible = "ti,emif-4d";
|
||||||
|
ti,hwmods = "emif2";
|
||||||
|
phy-type = <1>;
|
||||||
|
device-handle = <&elpida_ECB240ABACN>;
|
||||||
|
cs1-used;
|
||||||
|
hw-caps-read-idle-ctrl;
|
||||||
|
hw-caps-ll-interface;
|
||||||
|
hw-caps-temp-alert;
|
||||||
|
};
|
|
@ -19,11 +19,11 @@ memory {
|
||||||
};
|
};
|
||||||
|
|
||||||
ocp {
|
ocp {
|
||||||
uart1: serial@44E09000 {
|
uart1: serial@44e09000 {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
i2c1: i2c@44E0B000 {
|
i2c1: i2c@44e0b000 {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
clock-frequency = <400000>;
|
clock-frequency = <400000>;
|
||||||
|
|
||||||
|
|
|
@ -19,16 +19,16 @@ memory {
|
||||||
};
|
};
|
||||||
|
|
||||||
ocp {
|
ocp {
|
||||||
uart1: serial@44E09000 {
|
uart1: serial@44e09000 {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
i2c1: i2c@44E0B000 {
|
i2c1: i2c@44e0b000 {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
clock-frequency = <400000>;
|
clock-frequency = <400000>;
|
||||||
|
|
||||||
tps: tps@2D {
|
tps: tps@2d {
|
||||||
reg = <0x2D>;
|
reg = <0x2d>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
|
@ -69,39 +69,54 @@ gpio1: gpio@44e07000 {
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
interrupt-controller;
|
interrupt-controller;
|
||||||
#interrupt-cells = <1>;
|
#interrupt-cells = <1>;
|
||||||
|
reg = <0x44e07000 0x1000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <96>;
|
||||||
};
|
};
|
||||||
|
|
||||||
gpio2: gpio@4804C000 {
|
gpio2: gpio@4804c000 {
|
||||||
compatible = "ti,omap4-gpio";
|
compatible = "ti,omap4-gpio";
|
||||||
ti,hwmods = "gpio2";
|
ti,hwmods = "gpio2";
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
interrupt-controller;
|
interrupt-controller;
|
||||||
#interrupt-cells = <1>;
|
#interrupt-cells = <1>;
|
||||||
|
reg = <0x4804c000 0x1000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <98>;
|
||||||
};
|
};
|
||||||
|
|
||||||
gpio3: gpio@481AC000 {
|
gpio3: gpio@481ac000 {
|
||||||
compatible = "ti,omap4-gpio";
|
compatible = "ti,omap4-gpio";
|
||||||
ti,hwmods = "gpio3";
|
ti,hwmods = "gpio3";
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
interrupt-controller;
|
interrupt-controller;
|
||||||
#interrupt-cells = <1>;
|
#interrupt-cells = <1>;
|
||||||
|
reg = <0x481ac000 0x1000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <32>;
|
||||||
};
|
};
|
||||||
|
|
||||||
gpio4: gpio@481AE000 {
|
gpio4: gpio@481ae000 {
|
||||||
compatible = "ti,omap4-gpio";
|
compatible = "ti,omap4-gpio";
|
||||||
ti,hwmods = "gpio4";
|
ti,hwmods = "gpio4";
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
interrupt-controller;
|
interrupt-controller;
|
||||||
#interrupt-cells = <1>;
|
#interrupt-cells = <1>;
|
||||||
|
reg = <0x481ae000 0x1000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <62>;
|
||||||
};
|
};
|
||||||
|
|
||||||
uart1: serial@44E09000 {
|
uart1: serial@44e09000 {
|
||||||
compatible = "ti,omap3-uart";
|
compatible = "ti,omap3-uart";
|
||||||
ti,hwmods = "uart1";
|
ti,hwmods = "uart1";
|
||||||
clock-frequency = <48000000>;
|
clock-frequency = <48000000>;
|
||||||
|
reg = <0x44e09000 0x2000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <72>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
@ -109,6 +124,9 @@ uart2: serial@48022000 {
|
||||||
compatible = "ti,omap3-uart";
|
compatible = "ti,omap3-uart";
|
||||||
ti,hwmods = "uart2";
|
ti,hwmods = "uart2";
|
||||||
clock-frequency = <48000000>;
|
clock-frequency = <48000000>;
|
||||||
|
reg = <0x48022000 0x2000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <73>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
@ -116,57 +134,81 @@ uart3: serial@48024000 {
|
||||||
compatible = "ti,omap3-uart";
|
compatible = "ti,omap3-uart";
|
||||||
ti,hwmods = "uart3";
|
ti,hwmods = "uart3";
|
||||||
clock-frequency = <48000000>;
|
clock-frequency = <48000000>;
|
||||||
|
reg = <0x48024000 0x2000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <74>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
uart4: serial@481A6000 {
|
uart4: serial@481a6000 {
|
||||||
compatible = "ti,omap3-uart";
|
compatible = "ti,omap3-uart";
|
||||||
ti,hwmods = "uart4";
|
ti,hwmods = "uart4";
|
||||||
clock-frequency = <48000000>;
|
clock-frequency = <48000000>;
|
||||||
|
reg = <0x481a6000 0x2000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <44>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
uart5: serial@481A8000 {
|
uart5: serial@481a8000 {
|
||||||
compatible = "ti,omap3-uart";
|
compatible = "ti,omap3-uart";
|
||||||
ti,hwmods = "uart5";
|
ti,hwmods = "uart5";
|
||||||
clock-frequency = <48000000>;
|
clock-frequency = <48000000>;
|
||||||
|
reg = <0x481a8000 0x2000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <45>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
uart6: serial@481AA000 {
|
uart6: serial@481aa000 {
|
||||||
compatible = "ti,omap3-uart";
|
compatible = "ti,omap3-uart";
|
||||||
ti,hwmods = "uart6";
|
ti,hwmods = "uart6";
|
||||||
clock-frequency = <48000000>;
|
clock-frequency = <48000000>;
|
||||||
|
reg = <0x481aa000 0x2000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <46>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
i2c1: i2c@44E0B000 {
|
i2c1: i2c@44e0b000 {
|
||||||
compatible = "ti,omap4-i2c";
|
compatible = "ti,omap4-i2c";
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
ti,hwmods = "i2c1";
|
ti,hwmods = "i2c1";
|
||||||
|
reg = <0x44e0b000 0x1000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <70>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
i2c2: i2c@4802A000 {
|
i2c2: i2c@4802a000 {
|
||||||
compatible = "ti,omap4-i2c";
|
compatible = "ti,omap4-i2c";
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
ti,hwmods = "i2c2";
|
ti,hwmods = "i2c2";
|
||||||
|
reg = <0x4802a000 0x1000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <71>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
i2c3: i2c@4819C000 {
|
i2c3: i2c@4819c000 {
|
||||||
compatible = "ti,omap4-i2c";
|
compatible = "ti,omap4-i2c";
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
ti,hwmods = "i2c3";
|
ti,hwmods = "i2c3";
|
||||||
|
reg = <0x4819c000 0x1000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <30>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
wdt2: wdt@44e35000 {
|
wdt2: wdt@44e35000 {
|
||||||
compatible = "ti,omap3-wdt";
|
compatible = "ti,omap3-wdt";
|
||||||
ti,hwmods = "wd_timer2";
|
ti,hwmods = "wd_timer2";
|
||||||
|
reg = <0x44e35000 0x1000>;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
interrupts = <91>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
67
arch/arm/boot/dts/elpida_ecb240abacn.dtsi
Normal file
67
arch/arm/boot/dts/elpida_ecb240abacn.dtsi
Normal file
|
@ -0,0 +1,67 @@
|
||||||
|
/*
|
||||||
|
* Common devices used in different OMAP boards
|
||||||
|
*/
|
||||||
|
|
||||||
|
/ {
|
||||||
|
elpida_ECB240ABACN: lpddr2 {
|
||||||
|
compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
|
||||||
|
density = <2048>;
|
||||||
|
io-width = <32>;
|
||||||
|
|
||||||
|
tRPab-min-tck = <3>;
|
||||||
|
tRCD-min-tck = <3>;
|
||||||
|
tWR-min-tck = <3>;
|
||||||
|
tRASmin-min-tck = <3>;
|
||||||
|
tRRD-min-tck = <2>;
|
||||||
|
tWTR-min-tck = <2>;
|
||||||
|
tXP-min-tck = <2>;
|
||||||
|
tRTP-min-tck = <2>;
|
||||||
|
tCKE-min-tck = <3>;
|
||||||
|
tCKESR-min-tck = <3>;
|
||||||
|
tFAW-min-tck = <8>;
|
||||||
|
|
||||||
|
timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
|
||||||
|
compatible = "jedec,lpddr2-timings";
|
||||||
|
min-freq = <10000000>;
|
||||||
|
max-freq = <400000000>;
|
||||||
|
tRPab = <21000>;
|
||||||
|
tRCD = <18000>;
|
||||||
|
tWR = <15000>;
|
||||||
|
tRAS-min = <42000>;
|
||||||
|
tRRD = <10000>;
|
||||||
|
tWTR = <7500>;
|
||||||
|
tXP = <7500>;
|
||||||
|
tRTP = <7500>;
|
||||||
|
tCKESR = <15000>;
|
||||||
|
tDQSCK-max = <5500>;
|
||||||
|
tFAW = <50000>;
|
||||||
|
tZQCS = <90000>;
|
||||||
|
tZQCL = <360000>;
|
||||||
|
tZQinit = <1000000>;
|
||||||
|
tRAS-max-ns = <70000>;
|
||||||
|
tDQSCK-max-derated = <6000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
|
||||||
|
compatible = "jedec,lpddr2-timings";
|
||||||
|
min-freq = <10000000>;
|
||||||
|
max-freq = <200000000>;
|
||||||
|
tRPab = <21000>;
|
||||||
|
tRCD = <18000>;
|
||||||
|
tWR = <15000>;
|
||||||
|
tRAS-min = <42000>;
|
||||||
|
tRRD = <10000>;
|
||||||
|
tWTR = <10000>;
|
||||||
|
tXP = <7500>;
|
||||||
|
tRTP = <7500>;
|
||||||
|
tCKESR = <15000>;
|
||||||
|
tDQSCK-max = <5500>;
|
||||||
|
tFAW = <50000>;
|
||||||
|
tZQCS = <90000>;
|
||||||
|
tZQCL = <360000>;
|
||||||
|
tZQinit = <1000000>;
|
||||||
|
tRAS-max-ns = <70000>;
|
||||||
|
tDQSCK-max-derated = <6000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
|
@ -7,7 +7,7 @@
|
||||||
*/
|
*/
|
||||||
/dts-v1/;
|
/dts-v1/;
|
||||||
|
|
||||||
/include/ "omap2.dtsi"
|
/include/ "omap2420.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "TI OMAP2420 H4 board";
|
model = "TI OMAP2420 H4 board";
|
||||||
|
|
39
arch/arm/boot/dts/omap2420.dtsi
Normal file
39
arch/arm/boot/dts/omap2420.dtsi
Normal file
|
@ -0,0 +1,39 @@
|
||||||
|
/*
|
||||||
|
* Device Tree Source for OMAP2420 SoC
|
||||||
|
*
|
||||||
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
*
|
||||||
|
* This file is licensed under the terms of the GNU General Public License
|
||||||
|
* version 2. This program is licensed "as is" without any warranty of any
|
||||||
|
* kind, whether express or implied.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/include/ "omap2.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
compatible = "ti,omap2420", "ti,omap2";
|
||||||
|
|
||||||
|
ocp {
|
||||||
|
mcbsp1: mcbsp@48074000 {
|
||||||
|
compatible = "ti,omap2420-mcbsp";
|
||||||
|
reg = <0x48074000 0xff>;
|
||||||
|
reg-names = "mpu";
|
||||||
|
interrupts = <59>, /* TX interrupt */
|
||||||
|
<60>; /* RX interrupt */
|
||||||
|
interrupt-names = "tx", "rx";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
ti,hwmods = "mcbsp1";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp2: mcbsp@48076000 {
|
||||||
|
compatible = "ti,omap2420-mcbsp";
|
||||||
|
reg = <0x48076000 0xff>;
|
||||||
|
reg-names = "mpu";
|
||||||
|
interrupts = <62>, /* TX interrupt */
|
||||||
|
<63>; /* RX interrupt */
|
||||||
|
interrupt-names = "tx", "rx";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
ti,hwmods = "mcbsp2";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
83
arch/arm/boot/dts/omap2430.dtsi
Normal file
83
arch/arm/boot/dts/omap2430.dtsi
Normal file
|
@ -0,0 +1,83 @@
|
||||||
|
/*
|
||||||
|
* Device Tree Source for OMAP243x SoC
|
||||||
|
*
|
||||||
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
*
|
||||||
|
* This file is licensed under the terms of the GNU General Public License
|
||||||
|
* version 2. This program is licensed "as is" without any warranty of any
|
||||||
|
* kind, whether express or implied.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/include/ "omap2.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
compatible = "ti,omap2430", "ti,omap2";
|
||||||
|
|
||||||
|
ocp {
|
||||||
|
mcbsp1: mcbsp@48074000 {
|
||||||
|
compatible = "ti,omap2430-mcbsp";
|
||||||
|
reg = <0x48074000 0xff>;
|
||||||
|
reg-names = "mpu";
|
||||||
|
interrupts = <64>, /* OCP compliant interrupt */
|
||||||
|
<59>, /* TX interrupt */
|
||||||
|
<60>, /* RX interrupt */
|
||||||
|
<61>; /* RX overflow interrupt */
|
||||||
|
interrupt-names = "common", "tx", "rx", "rx_overflow";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp1";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp2: mcbsp@48076000 {
|
||||||
|
compatible = "ti,omap2430-mcbsp";
|
||||||
|
reg = <0x48076000 0xff>;
|
||||||
|
reg-names = "mpu";
|
||||||
|
interrupts = <16>, /* OCP compliant interrupt */
|
||||||
|
<62>, /* TX interrupt */
|
||||||
|
<63>; /* RX interrupt */
|
||||||
|
interrupt-names = "common", "tx", "rx";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp2";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp3: mcbsp@4808c000 {
|
||||||
|
compatible = "ti,omap2430-mcbsp";
|
||||||
|
reg = <0x4808c000 0xff>;
|
||||||
|
reg-names = "mpu";
|
||||||
|
interrupts = <17>, /* OCP compliant interrupt */
|
||||||
|
<89>, /* TX interrupt */
|
||||||
|
<90>; /* RX interrupt */
|
||||||
|
interrupt-names = "common", "tx", "rx";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp3";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp4: mcbsp@4808e000 {
|
||||||
|
compatible = "ti,omap2430-mcbsp";
|
||||||
|
reg = <0x4808e000 0xff>;
|
||||||
|
reg-names = "mpu";
|
||||||
|
interrupts = <18>, /* OCP compliant interrupt */
|
||||||
|
<54>, /* TX interrupt */
|
||||||
|
<55>; /* RX interrupt */
|
||||||
|
interrupt-names = "common", "tx", "rx";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp4";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp5: mcbsp@48096000 {
|
||||||
|
compatible = "ti,omap2430-mcbsp";
|
||||||
|
reg = <0x48096000 0xff>;
|
||||||
|
reg-names = "mpu";
|
||||||
|
interrupts = <19>, /* OCP compliant interrupt */
|
||||||
|
<81>, /* TX interrupt */
|
||||||
|
<82>; /* RX interrupt */
|
||||||
|
interrupt-names = "common", "tx", "rx";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp5";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
|
@ -17,6 +17,34 @@ memory {
|
||||||
device_type = "memory";
|
device_type = "memory";
|
||||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||||
};
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
pmu_stat {
|
||||||
|
label = "beagleboard::pmu_stat";
|
||||||
|
gpios = <&twl_gpio 19 0>; /* LEDB */
|
||||||
|
};
|
||||||
|
|
||||||
|
heartbeat {
|
||||||
|
label = "beagleboard::usr0";
|
||||||
|
gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
|
||||||
|
linux,default-trigger = "heartbeat";
|
||||||
|
};
|
||||||
|
|
||||||
|
mmc {
|
||||||
|
label = "beagleboard::usr1";
|
||||||
|
gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
|
||||||
|
linux,default-trigger = "mmc0";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
sound {
|
||||||
|
compatible = "ti,omap-twl4030";
|
||||||
|
ti,model = "omap3beagle";
|
||||||
|
|
||||||
|
ti,mcbsp = <&mcbsp2>;
|
||||||
|
ti,codec = <&twl_audio>;
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
&i2c1 {
|
&i2c1 {
|
||||||
|
@ -32,6 +60,12 @@ vsim: regulator-vsim {
|
||||||
regulator-min-microvolt = <1800000>;
|
regulator-min-microvolt = <1800000>;
|
||||||
regulator-max-microvolt = <3000000>;
|
regulator-max-microvolt = <3000000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
twl_audio: audio {
|
||||||
|
compatible = "ti,twl4030-audio";
|
||||||
|
codec {
|
||||||
|
};
|
||||||
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
@ -67,3 +101,15 @@ &mmc2 {
|
||||||
&mmc3 {
|
&mmc3 {
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&twl_gpio {
|
||||||
|
ti,use-leds;
|
||||||
|
/* pullups: BIT(1) */
|
||||||
|
ti,pullups = <0x000002>;
|
||||||
|
/*
|
||||||
|
* pulldowns:
|
||||||
|
* BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
|
||||||
|
* BIT(15), BIT(16), BIT(17)
|
||||||
|
*/
|
||||||
|
ti,pulldowns = <0x03a1c4>;
|
||||||
|
};
|
||||||
|
|
|
@ -17,6 +17,15 @@ memory {
|
||||||
device_type = "memory";
|
device_type = "memory";
|
||||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||||
};
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
ledb {
|
||||||
|
label = "omap3evm::ledb";
|
||||||
|
gpios = <&twl_gpio 19 0>; /* LEDB */
|
||||||
|
linux,default-trigger = "default-on";
|
||||||
|
};
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
&i2c1 {
|
&i2c1 {
|
||||||
|
@ -46,3 +55,7 @@ tvp5146@5c {
|
||||||
reg = <0x5c>;
|
reg = <0x5c>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&twl_gpio {
|
||||||
|
ti,use-leds;
|
||||||
|
};
|
||||||
|
|
57
arch/arm/boot/dts/omap3-overo.dtsi
Normal file
57
arch/arm/boot/dts/omap3-overo.dtsi
Normal file
|
@ -0,0 +1,57 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The Gumstix Overo must be combined with an expansion board.
|
||||||
|
*/
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
/include/ "omap3.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
overo {
|
||||||
|
label = "overo:blue:COM";
|
||||||
|
gpios = <&twl_gpio 19 0>;
|
||||||
|
linux,default-trigger = "mmc0";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&i2c1 {
|
||||||
|
clock-frequency = <2600000>;
|
||||||
|
|
||||||
|
twl: twl@48 {
|
||||||
|
reg = <0x48>;
|
||||||
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
/include/ "twl4030.dtsi"
|
||||||
|
|
||||||
|
/* i2c2 pins are used for gpio */
|
||||||
|
&i2c2 {
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
|
/* on board microSD slot */
|
||||||
|
&mmc1 {
|
||||||
|
vmmc-supply = <&vmmc1>;
|
||||||
|
bus-width = <4>;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* optional on board WiFi */
|
||||||
|
&mmc2 {
|
||||||
|
bus-width = <4>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&twl_gpio {
|
||||||
|
ti,use-leds;
|
||||||
|
};
|
35
arch/arm/boot/dts/omap3-tobi.dts
Normal file
35
arch/arm/boot/dts/omap3-tobi.dts
Normal file
|
@ -0,0 +1,35 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Tobi expansion board is manufactured by Gumstix Inc.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/include/ "omap3-overo.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "TI OMAP3 Gumstix Overo on Tobi";
|
||||||
|
compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
heartbeat {
|
||||||
|
label = "overo:red:gpio21";
|
||||||
|
gpios = <&gpio1 21 0>;
|
||||||
|
linux,default-trigger = "heartbeat";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&i2c3 {
|
||||||
|
clock-frequency = <100000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&mmc3 {
|
||||||
|
status = "disabled";
|
||||||
|
};
|
|
@ -220,5 +220,74 @@ wdt2: wdt@48314000 {
|
||||||
compatible = "ti,omap3-wdt";
|
compatible = "ti,omap3-wdt";
|
||||||
ti,hwmods = "wd_timer2";
|
ti,hwmods = "wd_timer2";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
mcbsp1: mcbsp@48074000 {
|
||||||
|
compatible = "ti,omap3-mcbsp";
|
||||||
|
reg = <0x48074000 0xff>;
|
||||||
|
reg-names = "mpu";
|
||||||
|
interrupts = <16>, /* OCP compliant interrupt */
|
||||||
|
<59>, /* TX interrupt */
|
||||||
|
<60>; /* RX interrupt */
|
||||||
|
interrupt-names = "common", "tx", "rx";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp1";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp2: mcbsp@49022000 {
|
||||||
|
compatible = "ti,omap3-mcbsp";
|
||||||
|
reg = <0x49022000 0xff>,
|
||||||
|
<0x49028000 0xff>;
|
||||||
|
reg-names = "mpu", "sidetone";
|
||||||
|
interrupts = <17>, /* OCP compliant interrupt */
|
||||||
|
<62>, /* TX interrupt */
|
||||||
|
<63>, /* RX interrupt */
|
||||||
|
<4>; /* Sidetone */
|
||||||
|
interrupt-names = "common", "tx", "rx", "sidetone";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
ti,buffer-size = <1280>;
|
||||||
|
ti,hwmods = "mcbsp2";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp3: mcbsp@49024000 {
|
||||||
|
compatible = "ti,omap3-mcbsp";
|
||||||
|
reg = <0x49024000 0xff>,
|
||||||
|
<0x4902a000 0xff>;
|
||||||
|
reg-names = "mpu", "sidetone";
|
||||||
|
interrupts = <22>, /* OCP compliant interrupt */
|
||||||
|
<89>, /* TX interrupt */
|
||||||
|
<90>, /* RX interrupt */
|
||||||
|
<5>; /* Sidetone */
|
||||||
|
interrupt-names = "common", "tx", "rx", "sidetone";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp3";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp4: mcbsp@49026000 {
|
||||||
|
compatible = "ti,omap3-mcbsp";
|
||||||
|
reg = <0x49026000 0xff>;
|
||||||
|
reg-names = "mpu";
|
||||||
|
interrupts = <23>, /* OCP compliant interrupt */
|
||||||
|
<54>, /* TX interrupt */
|
||||||
|
<55>; /* RX interrupt */
|
||||||
|
interrupt-names = "common", "tx", "rx";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp4";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp5: mcbsp@48096000 {
|
||||||
|
compatible = "ti,omap3-mcbsp";
|
||||||
|
reg = <0x48096000 0xff>;
|
||||||
|
reg-names = "mpu";
|
||||||
|
interrupts = <27>, /* OCP compliant interrupt */
|
||||||
|
<81>, /* TX interrupt */
|
||||||
|
<82>; /* RX interrupt */
|
||||||
|
interrupt-names = "common", "tx", "rx";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp5";
|
||||||
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
|
@ -8,6 +8,7 @@
|
||||||
/dts-v1/;
|
/dts-v1/;
|
||||||
|
|
||||||
/include/ "omap4.dtsi"
|
/include/ "omap4.dtsi"
|
||||||
|
/include/ "elpida_ecb240abacn.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "TI OMAP4 PandaBoard";
|
model = "TI OMAP4 PandaBoard";
|
||||||
|
@ -126,3 +127,13 @@ &mmc5 {
|
||||||
ti,non-removable;
|
ti,non-removable;
|
||||||
bus-width = <4>;
|
bus-width = <4>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&emif1 {
|
||||||
|
cs1-used;
|
||||||
|
device-handle = <&elpida_ECB240ABACN>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&emif2 {
|
||||||
|
cs1-used;
|
||||||
|
device-handle = <&elpida_ECB240ABACN>;
|
||||||
|
};
|
||||||
|
|
|
@ -8,6 +8,7 @@
|
||||||
/dts-v1/;
|
/dts-v1/;
|
||||||
|
|
||||||
/include/ "omap4.dtsi"
|
/include/ "omap4.dtsi"
|
||||||
|
/include/ "elpida_ecb240abacn.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "TI OMAP4 SDP board";
|
model = "TI OMAP4 SDP board";
|
||||||
|
@ -226,3 +227,83 @@ &mmc5 {
|
||||||
bus-width = <4>;
|
bus-width = <4>;
|
||||||
ti,non-removable;
|
ti,non-removable;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&emif1 {
|
||||||
|
cs1-used;
|
||||||
|
device-handle = <&elpida_ECB240ABACN>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&emif2 {
|
||||||
|
cs1-used;
|
||||||
|
device-handle = <&elpida_ECB240ABACN>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&keypad {
|
||||||
|
keypad,num-rows = <8>;
|
||||||
|
keypad,num-columns = <8>;
|
||||||
|
linux,keymap = <0x00000012 /* KEY_E */
|
||||||
|
0x00010013 /* KEY_R */
|
||||||
|
0x00020014 /* KEY_T */
|
||||||
|
0x00030066 /* KEY_HOME */
|
||||||
|
0x0004003f /* KEY_F5 */
|
||||||
|
0x000500f0 /* KEY_UNKNOWN */
|
||||||
|
0x00060017 /* KEY_I */
|
||||||
|
0x0007002a /* KEY_LEFTSHIFT */
|
||||||
|
0x01000020 /* KEY_D*/
|
||||||
|
0x01010021 /* KEY_F */
|
||||||
|
0x01020022 /* KEY_G */
|
||||||
|
0x010300e7 /* KEY_SEND */
|
||||||
|
0x01040040 /* KEY_F6 */
|
||||||
|
0x010500f0 /* KEY_UNKNOWN */
|
||||||
|
0x01060025 /* KEY_K */
|
||||||
|
0x0107001c /* KEY_ENTER */
|
||||||
|
0x0200002d /* KEY_X */
|
||||||
|
0x0201002e /* KEY_C */
|
||||||
|
0x0202002f /* KEY_V */
|
||||||
|
0x0203006b /* KEY_END */
|
||||||
|
0x02040041 /* KEY_F7 */
|
||||||
|
0x020500f0 /* KEY_UNKNOWN */
|
||||||
|
0x02060034 /* KEY_DOT */
|
||||||
|
0x0207003a /* KEY_CAPSLOCK */
|
||||||
|
0x0300002c /* KEY_Z */
|
||||||
|
0x0301004e /* KEY_KPLUS */
|
||||||
|
0x03020030 /* KEY_B */
|
||||||
|
0x0303003b /* KEY_F1 */
|
||||||
|
0x03040042 /* KEY_F8 */
|
||||||
|
0x030500f0 /* KEY_UNKNOWN */
|
||||||
|
0x03060018 /* KEY_O */
|
||||||
|
0x03070039 /* KEY_SPACE */
|
||||||
|
0x04000011 /* KEY_W */
|
||||||
|
0x04010015 /* KEY_Y */
|
||||||
|
0x04020016 /* KEY_U */
|
||||||
|
0x0403003c /* KEY_F2 */
|
||||||
|
0x04040073 /* KEY_VOLUMEUP */
|
||||||
|
0x040500f0 /* KEY_UNKNOWN */
|
||||||
|
0x04060026 /* KEY_L */
|
||||||
|
0x04070069 /* KEY_LEFT */
|
||||||
|
0x0500001f /* KEY_S */
|
||||||
|
0x05010023 /* KEY_H */
|
||||||
|
0x05020024 /* KEY_J */
|
||||||
|
0x0503003d /* KEY_F3 */
|
||||||
|
0x05040043 /* KEY_F9 */
|
||||||
|
0x05050072 /* KEY_VOLUMEDOWN */
|
||||||
|
0x05060032 /* KEY_M */
|
||||||
|
0x0507006a /* KEY_RIGHT */
|
||||||
|
0x06000010 /* KEY_Q */
|
||||||
|
0x0601001e /* KEY_A */
|
||||||
|
0x06020031 /* KEY_N */
|
||||||
|
0x0603009e /* KEY_BACK */
|
||||||
|
0x0604000e /* KEY_BACKSPACE */
|
||||||
|
0x060500f0 /* KEY_UNKNOWN */
|
||||||
|
0x06060019 /* KEY_P */
|
||||||
|
0x06070067 /* KEY_UP */
|
||||||
|
0x07000094 /* KEY_PROG1 */
|
||||||
|
0x07010095 /* KEY_PROG2 */
|
||||||
|
0x070200ca /* KEY_PROG3 */
|
||||||
|
0x070300cb /* KEY_PROG4 */
|
||||||
|
0x0704003e /* KEY_F4 */
|
||||||
|
0x070500f0 /* KEY_UNKNOWN */
|
||||||
|
0x07060160 /* KEY_OK */
|
||||||
|
0x0707006c>; /* KEY_DOWN */
|
||||||
|
linux,input-no-autorepeat;
|
||||||
|
};
|
||||||
|
|
|
@ -30,12 +30,35 @@ aliases {
|
||||||
cpus {
|
cpus {
|
||||||
cpu@0 {
|
cpu@0 {
|
||||||
compatible = "arm,cortex-a9";
|
compatible = "arm,cortex-a9";
|
||||||
|
next-level-cache = <&L2>;
|
||||||
};
|
};
|
||||||
cpu@1 {
|
cpu@1 {
|
||||||
compatible = "arm,cortex-a9";
|
compatible = "arm,cortex-a9";
|
||||||
|
next-level-cache = <&L2>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
gic: interrupt-controller@48241000 {
|
||||||
|
compatible = "arm,cortex-a9-gic";
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <3>;
|
||||||
|
reg = <0x48241000 0x1000>,
|
||||||
|
<0x48240100 0x0100>;
|
||||||
|
};
|
||||||
|
|
||||||
|
L2: l2-cache-controller@48242000 {
|
||||||
|
compatible = "arm,pl310-cache";
|
||||||
|
reg = <0x48242000 0x1000>;
|
||||||
|
cache-unified;
|
||||||
|
cache-level = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
|
local-timer@0x48240600 {
|
||||||
|
compatible = "arm,cortex-a9-twd-timer";
|
||||||
|
reg = <0x48240600 0x20>;
|
||||||
|
interrupts = <1 13 0x304>;
|
||||||
|
};
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* The soc node represents the soc top level view. It is uses for IPs
|
* The soc node represents the soc top level view. It is uses for IPs
|
||||||
* that are not memory mapped in the MPU view or for the MPU itself.
|
* that are not memory mapped in the MPU view or for the MPU itself.
|
||||||
|
@ -61,30 +84,6 @@ iva {
|
||||||
/*
|
/*
|
||||||
* XXX: Use a flat representation of the OMAP4 interconnect.
|
* XXX: Use a flat representation of the OMAP4 interconnect.
|
||||||
* The real OMAP interconnect network is quite complex.
|
* The real OMAP interconnect network is quite complex.
|
||||||
*
|
|
||||||
* MPU -+-- MPU_PRIVATE - GIC, L2
|
|
||||||
* |
|
|
||||||
* +----------------+----------+
|
|
||||||
* | | |
|
|
||||||
* + +- EMIF - DDR |
|
|
||||||
* | | |
|
|
||||||
* | + +--------+
|
|
||||||
* | | |
|
|
||||||
* | +- L4_ABE - AESS, MCBSP, TIMERs...
|
|
||||||
* | |
|
|
||||||
* +- L3_MAIN --+- L4_CORE - IPs...
|
|
||||||
* |
|
|
||||||
* +- L4_PER - IPs...
|
|
||||||
* |
|
|
||||||
* +- L4_CFG -+- L4_WKUP - IPs...
|
|
||||||
* | |
|
|
||||||
* | +- IPs...
|
|
||||||
* +- IPU ----+
|
|
||||||
* | |
|
|
||||||
* +- DSP ----+
|
|
||||||
* | |
|
|
||||||
* +- DSS ----+
|
|
||||||
*
|
|
||||||
* Since that will not bring real advantage to represent that in DT for
|
* Since that will not bring real advantage to represent that in DT for
|
||||||
* the moment, just use a fake OCP bus entry to represent the whole bus
|
* the moment, just use a fake OCP bus entry to represent the whole bus
|
||||||
* hierarchy.
|
* hierarchy.
|
||||||
|
@ -96,16 +95,10 @@ ocp {
|
||||||
ranges;
|
ranges;
|
||||||
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
|
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
|
||||||
|
|
||||||
gic: interrupt-controller@48241000 {
|
|
||||||
compatible = "arm,cortex-a9-gic";
|
|
||||||
interrupt-controller;
|
|
||||||
#interrupt-cells = <3>;
|
|
||||||
reg = <0x48241000 0x1000>,
|
|
||||||
<0x48240100 0x0100>;
|
|
||||||
};
|
|
||||||
|
|
||||||
gpio1: gpio@4a310000 {
|
gpio1: gpio@4a310000 {
|
||||||
compatible = "ti,omap4-gpio";
|
compatible = "ti,omap4-gpio";
|
||||||
|
reg = <0x4a310000 0x200>;
|
||||||
|
interrupts = <0 29 0x4>;
|
||||||
ti,hwmods = "gpio1";
|
ti,hwmods = "gpio1";
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
|
@ -115,6 +108,8 @@ gpio1: gpio@4a310000 {
|
||||||
|
|
||||||
gpio2: gpio@48055000 {
|
gpio2: gpio@48055000 {
|
||||||
compatible = "ti,omap4-gpio";
|
compatible = "ti,omap4-gpio";
|
||||||
|
reg = <0x48055000 0x200>;
|
||||||
|
interrupts = <0 30 0x4>;
|
||||||
ti,hwmods = "gpio2";
|
ti,hwmods = "gpio2";
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
|
@ -124,6 +119,8 @@ gpio2: gpio@48055000 {
|
||||||
|
|
||||||
gpio3: gpio@48057000 {
|
gpio3: gpio@48057000 {
|
||||||
compatible = "ti,omap4-gpio";
|
compatible = "ti,omap4-gpio";
|
||||||
|
reg = <0x48057000 0x200>;
|
||||||
|
interrupts = <0 31 0x4>;
|
||||||
ti,hwmods = "gpio3";
|
ti,hwmods = "gpio3";
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
|
@ -133,6 +130,8 @@ gpio3: gpio@48057000 {
|
||||||
|
|
||||||
gpio4: gpio@48059000 {
|
gpio4: gpio@48059000 {
|
||||||
compatible = "ti,omap4-gpio";
|
compatible = "ti,omap4-gpio";
|
||||||
|
reg = <0x48059000 0x200>;
|
||||||
|
interrupts = <0 32 0x4>;
|
||||||
ti,hwmods = "gpio4";
|
ti,hwmods = "gpio4";
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
|
@ -142,6 +141,8 @@ gpio4: gpio@48059000 {
|
||||||
|
|
||||||
gpio5: gpio@4805b000 {
|
gpio5: gpio@4805b000 {
|
||||||
compatible = "ti,omap4-gpio";
|
compatible = "ti,omap4-gpio";
|
||||||
|
reg = <0x4805b000 0x200>;
|
||||||
|
interrupts = <0 33 0x4>;
|
||||||
ti,hwmods = "gpio5";
|
ti,hwmods = "gpio5";
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
|
@ -151,6 +152,8 @@ gpio5: gpio@4805b000 {
|
||||||
|
|
||||||
gpio6: gpio@4805d000 {
|
gpio6: gpio@4805d000 {
|
||||||
compatible = "ti,omap4-gpio";
|
compatible = "ti,omap4-gpio";
|
||||||
|
reg = <0x4805d000 0x200>;
|
||||||
|
interrupts = <0 34 0x4>;
|
||||||
ti,hwmods = "gpio6";
|
ti,hwmods = "gpio6";
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
|
@ -160,30 +163,40 @@ gpio6: gpio@4805d000 {
|
||||||
|
|
||||||
uart1: serial@4806a000 {
|
uart1: serial@4806a000 {
|
||||||
compatible = "ti,omap4-uart";
|
compatible = "ti,omap4-uart";
|
||||||
|
reg = <0x4806a000 0x100>;
|
||||||
|
interrupts = <0 72 0x4>;
|
||||||
ti,hwmods = "uart1";
|
ti,hwmods = "uart1";
|
||||||
clock-frequency = <48000000>;
|
clock-frequency = <48000000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
uart2: serial@4806c000 {
|
uart2: serial@4806c000 {
|
||||||
compatible = "ti,omap4-uart";
|
compatible = "ti,omap4-uart";
|
||||||
|
reg = <0x4806c000 0x100>;
|
||||||
|
interrupts = <0 73 0x4>;
|
||||||
ti,hwmods = "uart2";
|
ti,hwmods = "uart2";
|
||||||
clock-frequency = <48000000>;
|
clock-frequency = <48000000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
uart3: serial@48020000 {
|
uart3: serial@48020000 {
|
||||||
compatible = "ti,omap4-uart";
|
compatible = "ti,omap4-uart";
|
||||||
|
reg = <0x48020000 0x100>;
|
||||||
|
interrupts = <0 74 0x4>;
|
||||||
ti,hwmods = "uart3";
|
ti,hwmods = "uart3";
|
||||||
clock-frequency = <48000000>;
|
clock-frequency = <48000000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
uart4: serial@4806e000 {
|
uart4: serial@4806e000 {
|
||||||
compatible = "ti,omap4-uart";
|
compatible = "ti,omap4-uart";
|
||||||
|
reg = <0x4806e000 0x100>;
|
||||||
|
interrupts = <0 70 0x4>;
|
||||||
ti,hwmods = "uart4";
|
ti,hwmods = "uart4";
|
||||||
clock-frequency = <48000000>;
|
clock-frequency = <48000000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
i2c1: i2c@48070000 {
|
i2c1: i2c@48070000 {
|
||||||
compatible = "ti,omap4-i2c";
|
compatible = "ti,omap4-i2c";
|
||||||
|
reg = <0x48070000 0x100>;
|
||||||
|
interrupts = <0 56 0x4>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
ti,hwmods = "i2c1";
|
ti,hwmods = "i2c1";
|
||||||
|
@ -191,6 +204,8 @@ i2c1: i2c@48070000 {
|
||||||
|
|
||||||
i2c2: i2c@48072000 {
|
i2c2: i2c@48072000 {
|
||||||
compatible = "ti,omap4-i2c";
|
compatible = "ti,omap4-i2c";
|
||||||
|
reg = <0x48072000 0x100>;
|
||||||
|
interrupts = <0 57 0x4>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
ti,hwmods = "i2c2";
|
ti,hwmods = "i2c2";
|
||||||
|
@ -198,6 +213,8 @@ i2c2: i2c@48072000 {
|
||||||
|
|
||||||
i2c3: i2c@48060000 {
|
i2c3: i2c@48060000 {
|
||||||
compatible = "ti,omap4-i2c";
|
compatible = "ti,omap4-i2c";
|
||||||
|
reg = <0x48060000 0x100>;
|
||||||
|
interrupts = <0 61 0x4>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
ti,hwmods = "i2c3";
|
ti,hwmods = "i2c3";
|
||||||
|
@ -205,6 +222,8 @@ i2c3: i2c@48060000 {
|
||||||
|
|
||||||
i2c4: i2c@48350000 {
|
i2c4: i2c@48350000 {
|
||||||
compatible = "ti,omap4-i2c";
|
compatible = "ti,omap4-i2c";
|
||||||
|
reg = <0x48350000 0x100>;
|
||||||
|
interrupts = <0 62 0x4>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
ti,hwmods = "i2c4";
|
ti,hwmods = "i2c4";
|
||||||
|
@ -212,6 +231,8 @@ i2c4: i2c@48350000 {
|
||||||
|
|
||||||
mcspi1: spi@48098000 {
|
mcspi1: spi@48098000 {
|
||||||
compatible = "ti,omap4-mcspi";
|
compatible = "ti,omap4-mcspi";
|
||||||
|
reg = <0x48098000 0x200>;
|
||||||
|
interrupts = <0 65 0x4>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
ti,hwmods = "mcspi1";
|
ti,hwmods = "mcspi1";
|
||||||
|
@ -220,6 +241,8 @@ mcspi1: spi@48098000 {
|
||||||
|
|
||||||
mcspi2: spi@4809a000 {
|
mcspi2: spi@4809a000 {
|
||||||
compatible = "ti,omap4-mcspi";
|
compatible = "ti,omap4-mcspi";
|
||||||
|
reg = <0x4809a000 0x200>;
|
||||||
|
interrupts = <0 66 0x4>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
ti,hwmods = "mcspi2";
|
ti,hwmods = "mcspi2";
|
||||||
|
@ -228,6 +251,8 @@ mcspi2: spi@4809a000 {
|
||||||
|
|
||||||
mcspi3: spi@480b8000 {
|
mcspi3: spi@480b8000 {
|
||||||
compatible = "ti,omap4-mcspi";
|
compatible = "ti,omap4-mcspi";
|
||||||
|
reg = <0x480b8000 0x200>;
|
||||||
|
interrupts = <0 91 0x4>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
ti,hwmods = "mcspi3";
|
ti,hwmods = "mcspi3";
|
||||||
|
@ -236,6 +261,8 @@ mcspi3: spi@480b8000 {
|
||||||
|
|
||||||
mcspi4: spi@480ba000 {
|
mcspi4: spi@480ba000 {
|
||||||
compatible = "ti,omap4-mcspi";
|
compatible = "ti,omap4-mcspi";
|
||||||
|
reg = <0x480ba000 0x200>;
|
||||||
|
interrupts = <0 48 0x4>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
ti,hwmods = "mcspi4";
|
ti,hwmods = "mcspi4";
|
||||||
|
@ -244,6 +271,8 @@ mcspi4: spi@480ba000 {
|
||||||
|
|
||||||
mmc1: mmc@4809c000 {
|
mmc1: mmc@4809c000 {
|
||||||
compatible = "ti,omap4-hsmmc";
|
compatible = "ti,omap4-hsmmc";
|
||||||
|
reg = <0x4809c000 0x400>;
|
||||||
|
interrupts = <0 83 0x4>;
|
||||||
ti,hwmods = "mmc1";
|
ti,hwmods = "mmc1";
|
||||||
ti,dual-volt;
|
ti,dual-volt;
|
||||||
ti,needs-special-reset;
|
ti,needs-special-reset;
|
||||||
|
@ -251,30 +280,40 @@ mmc1: mmc@4809c000 {
|
||||||
|
|
||||||
mmc2: mmc@480b4000 {
|
mmc2: mmc@480b4000 {
|
||||||
compatible = "ti,omap4-hsmmc";
|
compatible = "ti,omap4-hsmmc";
|
||||||
|
reg = <0x480b4000 0x400>;
|
||||||
|
interrupts = <0 86 0x4>;
|
||||||
ti,hwmods = "mmc2";
|
ti,hwmods = "mmc2";
|
||||||
ti,needs-special-reset;
|
ti,needs-special-reset;
|
||||||
};
|
};
|
||||||
|
|
||||||
mmc3: mmc@480ad000 {
|
mmc3: mmc@480ad000 {
|
||||||
compatible = "ti,omap4-hsmmc";
|
compatible = "ti,omap4-hsmmc";
|
||||||
|
reg = <0x480ad000 0x400>;
|
||||||
|
interrupts = <0 94 0x4>;
|
||||||
ti,hwmods = "mmc3";
|
ti,hwmods = "mmc3";
|
||||||
ti,needs-special-reset;
|
ti,needs-special-reset;
|
||||||
};
|
};
|
||||||
|
|
||||||
mmc4: mmc@480d1000 {
|
mmc4: mmc@480d1000 {
|
||||||
compatible = "ti,omap4-hsmmc";
|
compatible = "ti,omap4-hsmmc";
|
||||||
|
reg = <0x480d1000 0x400>;
|
||||||
|
interrupts = <0 96 0x4>;
|
||||||
ti,hwmods = "mmc4";
|
ti,hwmods = "mmc4";
|
||||||
ti,needs-special-reset;
|
ti,needs-special-reset;
|
||||||
};
|
};
|
||||||
|
|
||||||
mmc5: mmc@480d5000 {
|
mmc5: mmc@480d5000 {
|
||||||
compatible = "ti,omap4-hsmmc";
|
compatible = "ti,omap4-hsmmc";
|
||||||
|
reg = <0x480d5000 0x400>;
|
||||||
|
interrupts = <0 59 0x4>;
|
||||||
ti,hwmods = "mmc5";
|
ti,hwmods = "mmc5";
|
||||||
ti,needs-special-reset;
|
ti,needs-special-reset;
|
||||||
};
|
};
|
||||||
|
|
||||||
wdt2: wdt@4a314000 {
|
wdt2: wdt@4a314000 {
|
||||||
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
|
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
|
||||||
|
reg = <0x4a314000 0x80>;
|
||||||
|
interrupts = <0 80 0x4>;
|
||||||
ti,hwmods = "wd_timer2";
|
ti,hwmods = "wd_timer2";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
@ -282,6 +321,7 @@ mcpdm: mcpdm@40132000 {
|
||||||
compatible = "ti,omap4-mcpdm";
|
compatible = "ti,omap4-mcpdm";
|
||||||
reg = <0x40132000 0x7f>, /* MPU private access */
|
reg = <0x40132000 0x7f>, /* MPU private access */
|
||||||
<0x49032000 0x7f>; /* L3 Interconnect */
|
<0x49032000 0x7f>; /* L3 Interconnect */
|
||||||
|
reg-names = "mpu", "dma";
|
||||||
interrupts = <0 112 0x4>;
|
interrupts = <0 112 0x4>;
|
||||||
interrupt-parent = <&gic>;
|
interrupt-parent = <&gic>;
|
||||||
ti,hwmods = "mcpdm";
|
ti,hwmods = "mcpdm";
|
||||||
|
@ -291,9 +331,87 @@ dmic: dmic@4012e000 {
|
||||||
compatible = "ti,omap4-dmic";
|
compatible = "ti,omap4-dmic";
|
||||||
reg = <0x4012e000 0x7f>, /* MPU private access */
|
reg = <0x4012e000 0x7f>, /* MPU private access */
|
||||||
<0x4902e000 0x7f>; /* L3 Interconnect */
|
<0x4902e000 0x7f>; /* L3 Interconnect */
|
||||||
|
reg-names = "mpu", "dma";
|
||||||
interrupts = <0 114 0x4>;
|
interrupts = <0 114 0x4>;
|
||||||
interrupt-parent = <&gic>;
|
interrupt-parent = <&gic>;
|
||||||
ti,hwmods = "dmic";
|
ti,hwmods = "dmic";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
mcbsp1: mcbsp@40122000 {
|
||||||
|
compatible = "ti,omap4-mcbsp";
|
||||||
|
reg = <0x40122000 0xff>, /* MPU private access */
|
||||||
|
<0x49022000 0xff>; /* L3 Interconnect */
|
||||||
|
reg-names = "mpu", "dma";
|
||||||
|
interrupts = <0 17 0x4>;
|
||||||
|
interrupt-names = "common";
|
||||||
|
interrupt-parent = <&gic>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp1";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp2: mcbsp@40124000 {
|
||||||
|
compatible = "ti,omap4-mcbsp";
|
||||||
|
reg = <0x40124000 0xff>, /* MPU private access */
|
||||||
|
<0x49024000 0xff>; /* L3 Interconnect */
|
||||||
|
reg-names = "mpu", "dma";
|
||||||
|
interrupts = <0 22 0x4>;
|
||||||
|
interrupt-names = "common";
|
||||||
|
interrupt-parent = <&gic>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp2";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp3: mcbsp@40126000 {
|
||||||
|
compatible = "ti,omap4-mcbsp";
|
||||||
|
reg = <0x40126000 0xff>, /* MPU private access */
|
||||||
|
<0x49026000 0xff>; /* L3 Interconnect */
|
||||||
|
reg-names = "mpu", "dma";
|
||||||
|
interrupts = <0 23 0x4>;
|
||||||
|
interrupt-names = "common";
|
||||||
|
interrupt-parent = <&gic>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp3";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp4: mcbsp@48096000 {
|
||||||
|
compatible = "ti,omap4-mcbsp";
|
||||||
|
reg = <0x48096000 0xff>; /* L4 Interconnect */
|
||||||
|
reg-names = "mpu";
|
||||||
|
interrupts = <0 16 0x4>;
|
||||||
|
interrupt-names = "common";
|
||||||
|
interrupt-parent = <&gic>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp4";
|
||||||
|
};
|
||||||
|
|
||||||
|
keypad: keypad@4a31c000 {
|
||||||
|
compatible = "ti,omap4-keypad";
|
||||||
|
reg = <0x4a31c000 0x80>;
|
||||||
|
interrupts = <0 120 0x4>;
|
||||||
|
reg-names = "mpu";
|
||||||
|
ti,hwmods = "kbd";
|
||||||
|
};
|
||||||
|
|
||||||
|
emif1: emif@4c000000 {
|
||||||
|
compatible = "ti,emif-4d";
|
||||||
|
reg = <0x4c000000 0x100>;
|
||||||
|
interrupts = <0 110 0x4>;
|
||||||
|
ti,hwmods = "emif1";
|
||||||
|
phy-type = <1>;
|
||||||
|
hw-caps-read-idle-ctrl;
|
||||||
|
hw-caps-ll-interface;
|
||||||
|
hw-caps-temp-alert;
|
||||||
|
};
|
||||||
|
|
||||||
|
emif2: emif@4d000000 {
|
||||||
|
compatible = "ti,emif-4d";
|
||||||
|
reg = <0x4d000000 0x100>;
|
||||||
|
interrupts = <0 111 0x4>;
|
||||||
|
ti,hwmods = "emif2";
|
||||||
|
phy-type = <1>;
|
||||||
|
hw-caps-read-idle-ctrl;
|
||||||
|
hw-caps-ll-interface;
|
||||||
|
hw-caps-temp-alert;
|
||||||
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
|
@ -24,6 +24,7 @@ vmmcsd_fixed: fixedregulator-mmcsd {
|
||||||
regulator-min-microvolt = <3000000>;
|
regulator-min-microvolt = <3000000>;
|
||||||
regulator-max-microvolt = <3000000>;
|
regulator-max-microvolt = <3000000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
&mmc1 {
|
&mmc1 {
|
||||||
|
@ -49,3 +50,35 @@ &mmc4 {
|
||||||
&mmc5 {
|
&mmc5 {
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&i2c2 {
|
||||||
|
clock-frequency = <400000>;
|
||||||
|
|
||||||
|
/* Pressure Sensor */
|
||||||
|
bmp085@77 {
|
||||||
|
compatible = "bosch,bmp085";
|
||||||
|
reg = <0x77>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&i2c4 {
|
||||||
|
clock-frequency = <400000>;
|
||||||
|
|
||||||
|
/* Temperature Sensor */
|
||||||
|
tmp102@48{
|
||||||
|
compatible = "ti,tmp102";
|
||||||
|
reg = <0x48>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&keypad {
|
||||||
|
keypad,num-rows = <8>;
|
||||||
|
keypad,num-columns = <8>;
|
||||||
|
linux,keymap = <0x02020073 /* VOLUP */
|
||||||
|
0x02030072 /* VOLDOWM */
|
||||||
|
0x020400e7 /* SEND */
|
||||||
|
0x02050066 /* HOME */
|
||||||
|
0x0206006b /* END */
|
||||||
|
0x020700d9>; /* SEARCH */
|
||||||
|
linux,input-no-autorepeat;
|
||||||
|
};
|
||||||
|
|
|
@ -145,6 +145,41 @@ gpio8: gpio@48053000 {
|
||||||
#interrupt-cells = <1>;
|
#interrupt-cells = <1>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
i2c1: i2c@48070000 {
|
||||||
|
compatible = "ti,omap4-i2c";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
ti,hwmods = "i2c1";
|
||||||
|
};
|
||||||
|
|
||||||
|
i2c2: i2c@48072000 {
|
||||||
|
compatible = "ti,omap4-i2c";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
ti,hwmods = "i2c2";
|
||||||
|
};
|
||||||
|
|
||||||
|
i2c3: i2c@48060000 {
|
||||||
|
compatible = "ti,omap4-i2c";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
ti,hwmods = "i2c3";
|
||||||
|
};
|
||||||
|
|
||||||
|
i2c4: i2c@4807A000 {
|
||||||
|
compatible = "ti,omap4-i2c";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
ti,hwmods = "i2c4";
|
||||||
|
};
|
||||||
|
|
||||||
|
i2c5: i2c@4807C000 {
|
||||||
|
compatible = "ti,omap4-i2c";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
ti,hwmods = "i2c5";
|
||||||
|
};
|
||||||
|
|
||||||
uart1: serial@4806a000 {
|
uart1: serial@4806a000 {
|
||||||
compatible = "ti,omap4-uart";
|
compatible = "ti,omap4-uart";
|
||||||
ti,hwmods = "uart1";
|
ti,hwmods = "uart1";
|
||||||
|
@ -211,5 +246,66 @@ mmc5: mmc@480d5000 {
|
||||||
ti,hwmods = "mmc5";
|
ti,hwmods = "mmc5";
|
||||||
ti,needs-special-reset;
|
ti,needs-special-reset;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
keypad: keypad@4ae1c000 {
|
||||||
|
compatible = "ti,omap4-keypad";
|
||||||
|
ti,hwmods = "kbd";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcpdm: mcpdm@40132000 {
|
||||||
|
compatible = "ti,omap4-mcpdm";
|
||||||
|
reg = <0x40132000 0x7f>, /* MPU private access */
|
||||||
|
<0x49032000 0x7f>; /* L3 Interconnect */
|
||||||
|
reg-names = "mpu", "dma";
|
||||||
|
interrupts = <0 112 0x4>;
|
||||||
|
interrupt-parent = <&gic>;
|
||||||
|
ti,hwmods = "mcpdm";
|
||||||
|
};
|
||||||
|
|
||||||
|
dmic: dmic@4012e000 {
|
||||||
|
compatible = "ti,omap4-dmic";
|
||||||
|
reg = <0x4012e000 0x7f>, /* MPU private access */
|
||||||
|
<0x4902e000 0x7f>; /* L3 Interconnect */
|
||||||
|
reg-names = "mpu", "dma";
|
||||||
|
interrupts = <0 114 0x4>;
|
||||||
|
interrupt-parent = <&gic>;
|
||||||
|
ti,hwmods = "dmic";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp1: mcbsp@40122000 {
|
||||||
|
compatible = "ti,omap4-mcbsp";
|
||||||
|
reg = <0x40122000 0xff>, /* MPU private access */
|
||||||
|
<0x49022000 0xff>; /* L3 Interconnect */
|
||||||
|
reg-names = "mpu", "dma";
|
||||||
|
interrupts = <0 17 0x4>;
|
||||||
|
interrupt-names = "common";
|
||||||
|
interrupt-parent = <&gic>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp1";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp2: mcbsp@40124000 {
|
||||||
|
compatible = "ti,omap4-mcbsp";
|
||||||
|
reg = <0x40124000 0xff>, /* MPU private access */
|
||||||
|
<0x49024000 0xff>; /* L3 Interconnect */
|
||||||
|
reg-names = "mpu", "dma";
|
||||||
|
interrupts = <0 22 0x4>;
|
||||||
|
interrupt-names = "common";
|
||||||
|
interrupt-parent = <&gic>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp2";
|
||||||
|
};
|
||||||
|
|
||||||
|
mcbsp3: mcbsp@40126000 {
|
||||||
|
compatible = "ti,omap4-mcbsp";
|
||||||
|
reg = <0x40126000 0xff>, /* MPU private access */
|
||||||
|
<0x49026000 0xff>; /* L3 Interconnect */
|
||||||
|
reg-names = "mpu", "dma";
|
||||||
|
interrupts = <0 23 0x4>;
|
||||||
|
interrupt-names = "common";
|
||||||
|
interrupt-parent = <&gic>;
|
||||||
|
ti,buffer-size = <128>;
|
||||||
|
ti,hwmods = "mcbsp3";
|
||||||
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
|
@ -3,7 +3,7 @@ params_phys-y := 0x80000100
|
||||||
initrd_phys-y := 0x80800000
|
initrd_phys-y := 0x80800000
|
||||||
|
|
||||||
dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb
|
dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb
|
||||||
dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-evm.dtb
|
dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-evm.dtb omap3-tobi.dtb
|
||||||
dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb
|
dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb
|
||||||
dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb
|
dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb
|
||||||
dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb
|
dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb
|
||||||
|
|
|
@ -16,6 +16,7 @@
|
||||||
#include <linux/io.h>
|
#include <linux/io.h>
|
||||||
#include <linux/platform_device.h>
|
#include <linux/platform_device.h>
|
||||||
#include <linux/memblock.h>
|
#include <linux/memblock.h>
|
||||||
|
#include <linux/of.h>
|
||||||
|
|
||||||
#include <asm/hardware/gic.h>
|
#include <asm/hardware/gic.h>
|
||||||
#include <asm/hardware/cache-l2x0.h>
|
#include <asm/hardware/cache-l2x0.h>
|
||||||
|
@ -171,7 +172,10 @@ static int __init omap_l2_cache_init(void)
|
||||||
/* Enable PL310 L2 Cache controller */
|
/* Enable PL310 L2 Cache controller */
|
||||||
omap_smc1(0x102, 0x1);
|
omap_smc1(0x102, 0x1);
|
||||||
|
|
||||||
l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
|
if (of_have_populated_dt())
|
||||||
|
l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
|
||||||
|
else
|
||||||
|
l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Override default outer_cache.disable with a OMAP4
|
* Override default outer_cache.disable with a OMAP4
|
||||||
|
|
|
@ -3157,6 +3157,33 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
|
||||||
return r;
|
return r;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* omap_hwmod_fill_dma_resources - fill struct resource array with dma data
|
||||||
|
* @oh: struct omap_hwmod *
|
||||||
|
* @res: pointer to the array of struct resource to fill
|
||||||
|
*
|
||||||
|
* Fill the struct resource array @res with dma resource data from the
|
||||||
|
* omap_hwmod @oh. Intended to be called by code that registers
|
||||||
|
* omap_devices. See also omap_hwmod_count_resources(). Returns the
|
||||||
|
* number of array elements filled.
|
||||||
|
*/
|
||||||
|
int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res)
|
||||||
|
{
|
||||||
|
int i, sdma_reqs_cnt;
|
||||||
|
int r = 0;
|
||||||
|
|
||||||
|
sdma_reqs_cnt = _count_sdma_reqs(oh);
|
||||||
|
for (i = 0; i < sdma_reqs_cnt; i++) {
|
||||||
|
(res + r)->name = (oh->sdma_reqs + i)->name;
|
||||||
|
(res + r)->start = (oh->sdma_reqs + i)->dma_req;
|
||||||
|
(res + r)->end = (oh->sdma_reqs + i)->dma_req;
|
||||||
|
(res + r)->flags = IORESOURCE_DMA;
|
||||||
|
r++;
|
||||||
|
}
|
||||||
|
|
||||||
|
return r;
|
||||||
|
}
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* omap_hwmod_get_resource_byname - fetch IP block integration data by name
|
* omap_hwmod_get_resource_byname - fetch IP block integration data by name
|
||||||
* @oh: struct omap_hwmod * to operate on
|
* @oh: struct omap_hwmod * to operate on
|
||||||
|
|
|
@ -36,6 +36,7 @@
|
||||||
#include <linux/clocksource.h>
|
#include <linux/clocksource.h>
|
||||||
#include <linux/clockchips.h>
|
#include <linux/clockchips.h>
|
||||||
#include <linux/slab.h>
|
#include <linux/slab.h>
|
||||||
|
#include <linux/of.h>
|
||||||
|
|
||||||
#include <asm/mach/time.h>
|
#include <asm/mach/time.h>
|
||||||
#include <plat/dmtimer.h>
|
#include <plat/dmtimer.h>
|
||||||
|
@ -386,6 +387,11 @@ static void __init omap4_timer_init(void)
|
||||||
if (omap_rev() != OMAP4430_REV_ES1_0) {
|
if (omap_rev() != OMAP4430_REV_ES1_0) {
|
||||||
int err;
|
int err;
|
||||||
|
|
||||||
|
if (of_have_populated_dt()) {
|
||||||
|
twd_local_timer_of_register();
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
err = twd_local_timer_register(&twd_local_timer);
|
err = twd_local_timer_register(&twd_local_timer);
|
||||||
if (err)
|
if (err)
|
||||||
pr_err("twd_local_timer_register failed %d\n", err);
|
pr_err("twd_local_timer_register failed %d\n", err);
|
||||||
|
|
|
@ -615,6 +615,7 @@ int omap_hwmod_softreset(struct omap_hwmod *oh);
|
||||||
|
|
||||||
int omap_hwmod_count_resources(struct omap_hwmod *oh);
|
int omap_hwmod_count_resources(struct omap_hwmod *oh);
|
||||||
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
|
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
|
||||||
|
int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
|
||||||
int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
|
int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
|
||||||
const char *name, struct resource *res);
|
const char *name, struct resource *res);
|
||||||
|
|
||||||
|
|
|
@ -370,6 +370,14 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
|
||||||
goto odbfd_exit1;
|
goto odbfd_exit1;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
/* Fix up missing resource names */
|
||||||
|
for (i = 0; i < pdev->num_resources; i++) {
|
||||||
|
struct resource *r = &pdev->resource[i];
|
||||||
|
|
||||||
|
if (r->name == NULL)
|
||||||
|
r->name = dev_name(&pdev->dev);
|
||||||
|
}
|
||||||
|
|
||||||
if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
|
if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
|
||||||
omap_device_disable_idle_on_suspend(pdev);
|
omap_device_disable_idle_on_suspend(pdev);
|
||||||
|
|
||||||
|
@ -485,6 +493,33 @@ static int omap_device_fill_resources(struct omap_device *od,
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* _od_fill_dma_resources - fill in array of struct resource with dma resources
|
||||||
|
* @od: struct omap_device *
|
||||||
|
* @res: pointer to an array of struct resource to be filled in
|
||||||
|
*
|
||||||
|
* Populate one or more empty struct resource pointed to by @res with
|
||||||
|
* the dma resource data for this omap_device @od. Used by
|
||||||
|
* omap_device_alloc() after calling omap_device_count_resources().
|
||||||
|
*
|
||||||
|
* Ideally this function would not be needed at all. If we have
|
||||||
|
* mechanism to get dma resources from DT.
|
||||||
|
*
|
||||||
|
* Returns 0.
|
||||||
|
*/
|
||||||
|
static int _od_fill_dma_resources(struct omap_device *od,
|
||||||
|
struct resource *res)
|
||||||
|
{
|
||||||
|
int i, r;
|
||||||
|
|
||||||
|
for (i = 0; i < od->hwmods_cnt; i++) {
|
||||||
|
r = omap_hwmod_fill_dma_resources(od->hwmods[i], res);
|
||||||
|
res += r;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* omap_device_alloc - allocate an omap_device
|
* omap_device_alloc - allocate an omap_device
|
||||||
* @pdev: platform_device that will be included in this omap_device
|
* @pdev: platform_device that will be included in this omap_device
|
||||||
|
@ -524,24 +559,44 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev,
|
||||||
od->hwmods = hwmods;
|
od->hwmods = hwmods;
|
||||||
od->pdev = pdev;
|
od->pdev = pdev;
|
||||||
|
|
||||||
/*
|
|
||||||
* HACK: Ideally the resources from DT should match, and hwmod
|
|
||||||
* should just add the missing ones. Since the name is not
|
|
||||||
* properly populated by DT, stick to hwmod resources only.
|
|
||||||
*/
|
|
||||||
if (pdev->num_resources && pdev->resource)
|
|
||||||
dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
|
|
||||||
__func__, pdev->num_resources);
|
|
||||||
|
|
||||||
res_count = omap_device_count_resources(od);
|
res_count = omap_device_count_resources(od);
|
||||||
if (res_count > 0) {
|
/*
|
||||||
dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
|
* DT Boot:
|
||||||
__func__, res_count);
|
* OF framework will construct the resource structure (currently
|
||||||
|
* does for MEM & IRQ resource) and we should respect/use these
|
||||||
|
* resources, killing hwmod dependency.
|
||||||
|
* If pdev->num_resources > 0, we assume that MEM & IRQ resources
|
||||||
|
* have been allocated by OF layer already (through DTB).
|
||||||
|
*
|
||||||
|
* Non-DT Boot:
|
||||||
|
* Here, pdev->num_resources = 0, and we should get all the
|
||||||
|
* resources from hwmod.
|
||||||
|
*
|
||||||
|
* TODO: Once DMA resource is available from OF layer, we should
|
||||||
|
* kill filling any resources from hwmod.
|
||||||
|
*/
|
||||||
|
if (res_count > pdev->num_resources) {
|
||||||
|
/* Allocate resources memory to account for new resources */
|
||||||
res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
|
res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
|
||||||
if (!res)
|
if (!res)
|
||||||
goto oda_exit3;
|
goto oda_exit3;
|
||||||
|
|
||||||
omap_device_fill_resources(od, res);
|
/*
|
||||||
|
* If pdev->num_resources > 0, then assume that,
|
||||||
|
* MEM and IRQ resources will only come from DT and only
|
||||||
|
* fill DMA resource from hwmod layer.
|
||||||
|
*/
|
||||||
|
if (pdev->num_resources && pdev->resource) {
|
||||||
|
dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n",
|
||||||
|
__func__, res_count);
|
||||||
|
memcpy(res, pdev->resource,
|
||||||
|
sizeof(struct resource) * pdev->num_resources);
|
||||||
|
_od_fill_dma_resources(od, &res[pdev->num_resources]);
|
||||||
|
} else {
|
||||||
|
dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n",
|
||||||
|
__func__, res_count);
|
||||||
|
omap_device_fill_resources(od, res);
|
||||||
|
}
|
||||||
|
|
||||||
ret = platform_device_add_resources(pdev, res, res_count);
|
ret = platform_device_add_resources(pdev, res, res_count);
|
||||||
kfree(res);
|
kfree(res);
|
||||||
|
|
|
@ -395,6 +395,31 @@ static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
|
||||||
|
|
||||||
static int gpio_twl4030_remove(struct platform_device *pdev);
|
static int gpio_twl4030_remove(struct platform_device *pdev);
|
||||||
|
|
||||||
|
static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
|
||||||
|
{
|
||||||
|
struct twl4030_gpio_platform_data *omap_twl_info;
|
||||||
|
|
||||||
|
omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL);
|
||||||
|
if (!omap_twl_info)
|
||||||
|
return NULL;
|
||||||
|
|
||||||
|
omap_twl_info->gpio_base = -1;
|
||||||
|
|
||||||
|
omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
|
||||||
|
"ti,use-leds");
|
||||||
|
|
||||||
|
of_property_read_u32(dev->of_node, "ti,debounce",
|
||||||
|
&omap_twl_info->debounce);
|
||||||
|
of_property_read_u32(dev->of_node, "ti,mmc-cd",
|
||||||
|
(u32 *)&omap_twl_info->mmc_cd);
|
||||||
|
of_property_read_u32(dev->of_node, "ti,pullups",
|
||||||
|
&omap_twl_info->pullups);
|
||||||
|
of_property_read_u32(dev->of_node, "ti,pulldowns",
|
||||||
|
&omap_twl_info->pulldowns);
|
||||||
|
|
||||||
|
return omap_twl_info;
|
||||||
|
}
|
||||||
|
|
||||||
static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
|
static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
|
||||||
{
|
{
|
||||||
struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
|
struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
|
||||||
|
@ -423,39 +448,42 @@ static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
|
||||||
twl4030_gpio_irq_base = irq_base;
|
twl4030_gpio_irq_base = irq_base;
|
||||||
|
|
||||||
no_irqs:
|
no_irqs:
|
||||||
twl_gpiochip.base = -1;
|
|
||||||
twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
|
twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
|
||||||
twl_gpiochip.dev = &pdev->dev;
|
twl_gpiochip.dev = &pdev->dev;
|
||||||
|
|
||||||
if (pdata) {
|
if (node)
|
||||||
twl_gpiochip.base = pdata->gpio_base;
|
pdata = of_gpio_twl4030(&pdev->dev);
|
||||||
|
|
||||||
/*
|
if (pdata == NULL) {
|
||||||
* NOTE: boards may waste power if they don't set pullups
|
dev_err(&pdev->dev, "Platform data is missing\n");
|
||||||
* and pulldowns correctly ... default for non-ULPI pins is
|
return -ENXIO;
|
||||||
* pulldown, and some other pins may have external pullups
|
|
||||||
* or pulldowns. Careful!
|
|
||||||
*/
|
|
||||||
ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
|
|
||||||
if (ret)
|
|
||||||
dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
|
|
||||||
pdata->pullups, pdata->pulldowns,
|
|
||||||
ret);
|
|
||||||
|
|
||||||
ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
|
|
||||||
if (ret)
|
|
||||||
dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
|
|
||||||
pdata->debounce, pdata->mmc_cd,
|
|
||||||
ret);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
|
|
||||||
* is (still) clear if use_leds is set.
|
|
||||||
*/
|
|
||||||
if (pdata->use_leds)
|
|
||||||
twl_gpiochip.ngpio += 2;
|
|
||||||
}
|
}
|
||||||
|
|
||||||
|
twl_gpiochip.base = pdata->gpio_base;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* NOTE: boards may waste power if they don't set pullups
|
||||||
|
* and pulldowns correctly ... default for non-ULPI pins is
|
||||||
|
* pulldown, and some other pins may have external pullups
|
||||||
|
* or pulldowns. Careful!
|
||||||
|
*/
|
||||||
|
ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
|
||||||
|
if (ret)
|
||||||
|
dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
|
||||||
|
pdata->pullups, pdata->pulldowns, ret);
|
||||||
|
|
||||||
|
ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
|
||||||
|
if (ret)
|
||||||
|
dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
|
||||||
|
pdata->debounce, pdata->mmc_cd, ret);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
|
||||||
|
* is (still) clear if use_leds is set.
|
||||||
|
*/
|
||||||
|
if (pdata->use_leds)
|
||||||
|
twl_gpiochip.ngpio += 2;
|
||||||
|
|
||||||
ret = gpiochip_add(&twl_gpiochip);
|
ret = gpiochip_add(&twl_gpiochip);
|
||||||
if (ret < 0) {
|
if (ret < 0) {
|
||||||
dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
|
dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
|
||||||
|
|
Loading…
Reference in a new issue