Merge branch 'pci/resource'

- Replace sparc pci_mmap_page_range() wrapper.  This still leaves a
  sparc-specific pci_mmap_resource_range(), but it's only one interface
  instead of two (Arnd Bergmann)

- Remove sparc-specific pci_mmap_resource_range() by implementing
  pci_iobar_pfn().  This removes the ability to map the entire PCI I/O
  space using /proc/bus/pci, but we believe that's already been broken
  since v2.6.28 (Arnd Bergmann)

* pci/resource:
  sparc: Use generic pci_mmap_resource_range()
  PCI: Remove pci_mmap_page_range() wrapper
This commit is contained in:
Bjorn Helgaas 2022-08-04 11:41:52 -05:00
commit bac0f4474c
6 changed files with 13 additions and 202 deletions

View File

@ -125,7 +125,7 @@ implementation of that functionality. To support the historical interface of
mmap() through files in /proc/bus/pci, platforms may also set HAVE_PCI_MMAP.
Alternatively, platforms which set HAVE_PCI_MMAP may provide their own
implementation of pci_mmap_page_range() instead of defining
implementation of pci_mmap_resource_range() instead of defining
ARCH_GENERIC_PCI_MMAP_RESOURCE.
Platforms which support write-combining maps of PCI resources must define

View File

@ -37,6 +37,7 @@ static inline int pci_proc_domain(struct pci_bus *bus)
#define HAVE_PCI_MMAP
#define arch_can_pci_mmap_io() 1
#define HAVE_ARCH_PCI_GET_UNMAPPED_AREA
#define ARCH_GENERIC_PCI_MMAP_RESOURCE
#define get_pci_unmapped_area get_fb_unmapped_area
#endif /* CONFIG_SPARC64 */

View File

@ -751,156 +751,15 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
}
/* Platform support for /proc/bus/pci/X/Y mmap()s. */
/* If the user uses a host-bridge as the PCI device, he may use
* this to perform a raw mmap() of the I/O or MEM space behind
* that controller.
*
* This can be useful for execution of x86 PCI bios initialization code
* on a PCI card, like the xfree86 int10 stuff does.
*/
static int __pci_mmap_make_offset_bus(struct pci_dev *pdev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state)
int pci_iobar_pfn(struct pci_dev *pdev, int bar, struct vm_area_struct *vma)
{
struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
unsigned long space_size, user_offset, user_size;
resource_size_t ioaddr = pci_resource_start(pdev, bar);
if (mmap_state == pci_mmap_io) {
space_size = resource_size(&pbm->io_space);
} else {
space_size = resource_size(&pbm->mem_space);
}
/* Make sure the request is in range. */
user_offset = vma->vm_pgoff << PAGE_SHIFT;
user_size = vma->vm_end - vma->vm_start;
if (user_offset >= space_size ||
(user_offset + user_size) > space_size)
if (!pbm)
return -EINVAL;
if (mmap_state == pci_mmap_io) {
vma->vm_pgoff = (pbm->io_space.start +
user_offset) >> PAGE_SHIFT;
} else {
vma->vm_pgoff = (pbm->mem_space.start +
user_offset) >> PAGE_SHIFT;
}
return 0;
}
/* Adjust vm_pgoff of VMA such that it is the physical page offset
* corresponding to the 32-bit pci bus offset for DEV requested by the user.
*
* Basically, the user finds the base address for his device which he wishes
* to mmap. They read the 32-bit value from the config space base register,
* add whatever PAGE_SIZE multiple offset they wish, and feed this into the
* offset parameter of mmap on /proc/bus/pci/XXX for that device.
*
* Returns negative error code on failure, zero on success.
*/
static int __pci_mmap_make_offset(struct pci_dev *pdev,
struct vm_area_struct *vma,
enum pci_mmap_state mmap_state)
{
unsigned long user_paddr, user_size;
int i, err;
/* First compute the physical address in vma->vm_pgoff,
* making sure the user offset is within range in the
* appropriate PCI space.
*/
err = __pci_mmap_make_offset_bus(pdev, vma, mmap_state);
if (err)
return err;
/* If this is a mapping on a host bridge, any address
* is OK.
*/
if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_HOST)
return err;
/* Otherwise make sure it's in the range for one of the
* device's resources.
*/
user_paddr = vma->vm_pgoff << PAGE_SHIFT;
user_size = vma->vm_end - vma->vm_start;
for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
struct resource *rp = &pdev->resource[i];
resource_size_t aligned_end;
/* Active? */
if (!rp->flags)
continue;
/* Same type? */
if (i == PCI_ROM_RESOURCE) {
if (mmap_state != pci_mmap_mem)
continue;
} else {
if ((mmap_state == pci_mmap_io &&
(rp->flags & IORESOURCE_IO) == 0) ||
(mmap_state == pci_mmap_mem &&
(rp->flags & IORESOURCE_MEM) == 0))
continue;
}
/* Align the resource end to the next page address.
* PAGE_SIZE intentionally added instead of (PAGE_SIZE - 1),
* because actually we need the address of the next byte
* after rp->end.
*/
aligned_end = (rp->end + PAGE_SIZE) & PAGE_MASK;
if ((rp->start <= user_paddr) &&
(user_paddr + user_size) <= aligned_end)
break;
}
if (i > PCI_ROM_RESOURCE)
return -EINVAL;
return 0;
}
/* Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
* device mapping.
*/
static void __pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state)
{
/* Our io_remap_pfn_range takes care of this, do nothing. */
}
/* Perform the actual remap of the pages for a PCI device mapping, as appropriate
* for this architecture. The region in the process to map is described by vm_start
* and vm_end members of VMA, the base physical address is found in vm_pgoff.
* The pci device structure is provided so that architectures may make mapping
* decisions on a per-device or per-bus basis.
*
* Returns a negative error code on failure, zero on success.
*/
int pci_mmap_page_range(struct pci_dev *dev, int bar,
struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
int ret;
ret = __pci_mmap_make_offset(dev, vma, mmap_state);
if (ret < 0)
return ret;
__pci_mmap_set_pgprot(dev, vma, mmap_state);
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
ret = io_remap_pfn_range(vma, vma->vm_start,
vma->vm_pgoff,
vma->vm_end - vma->vm_start,
vma->vm_page_prot);
if (ret)
return ret;
vma->vm_pgoff += (ioaddr + pbm->io_space.start) >> PAGE_SHIFT;
return 0;
}

View File

@ -13,27 +13,6 @@
#ifdef ARCH_GENERIC_PCI_MMAP_RESOURCE
/*
* Modern setup: generic pci_mmap_resource_range(), and implement the legacy
* pci_mmap_page_range() (if needed) as a wrapper round it.
*/
#ifdef HAVE_PCI_MMAP
int pci_mmap_page_range(struct pci_dev *pdev, int bar,
struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
resource_size_t start, end;
pci_resource_to_user(pdev, bar, &pdev->resource[bar], &start, &end);
/* Adjust vm_pgoff to be the offset within the resource */
vma->vm_pgoff -= start >> PAGE_SHIFT;
return pci_mmap_resource_range(pdev, bar, vma, mmap_state,
write_combine);
}
#endif
static const struct vm_operations_struct pci_phys_vm_ops = {
#ifdef CONFIG_HAVE_IOREMAP_PROT
.access = generic_access_phys,
@ -70,27 +49,4 @@ int pci_mmap_resource_range(struct pci_dev *pdev, int bar,
vma->vm_page_prot);
}
#elif defined(HAVE_PCI_MMAP) /* && !ARCH_GENERIC_PCI_MMAP_RESOURCE */
/*
* Legacy setup: Implement pci_mmap_resource_range() as a wrapper around
* the architecture's pci_mmap_page_range(), converting to "user visible"
* addresses as necessary.
*/
int pci_mmap_resource_range(struct pci_dev *pdev, int bar,
struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
resource_size_t start, end;
/*
* pci_mmap_page_range() expects the same kind of entry as coming
* from /proc/bus/pci/ which is a "user visible" value. If this is
* different from the resource itself, arch will do necessary fixup.
*/
pci_resource_to_user(pdev, bar, &pdev->resource[bar], &start, &end);
vma->vm_pgoff += start >> PAGE_SHIFT;
return pci_mmap_page_range(pdev, bar, vma, mmap_state, write_combine);
}
#endif

View File

@ -244,6 +244,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
{
struct pci_dev *dev = pde_data(file_inode(file));
struct pci_filp_private *fpriv = file->private_data;
resource_size_t start, end;
int i, ret, write_combine = 0, res_bit = IORESOURCE_MEM;
if (!capable(CAP_SYS_RAWIO) ||
@ -278,7 +279,11 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
iomem_is_exclusive(dev->resource[i].start))
return -EINVAL;
ret = pci_mmap_page_range(dev, i, vma,
pci_resource_to_user(dev, i, &dev->resource[i], &start, &end);
/* Adjust vm_pgoff to be the offset within the resource */
vma->vm_pgoff -= start >> PAGE_SHIFT;
ret = pci_mmap_resource_range(dev, i, vma,
fpriv->mmap_state, write_combine);
if (ret < 0)
return ret;

View File

@ -1909,24 +1909,14 @@ pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
#include <asm/pci.h>
/* These two functions provide almost identical functionality. Depending
* on the architecture, one will be implemented as a wrapper around the
* other (in drivers/pci/mmap.c).
*
/*
* pci_mmap_resource_range() maps a specific BAR, and vm->vm_pgoff
* is expected to be an offset within that region.
*
* pci_mmap_page_range() is the legacy architecture-specific interface,
* which accepts a "user visible" resource address converted by
* pci_resource_to_user(), as used in the legacy mmap() interface in
* /proc/bus/pci/.
*/
int pci_mmap_resource_range(struct pci_dev *dev, int bar,
struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
int pci_mmap_page_range(struct pci_dev *pdev, int bar,
struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
#ifndef arch_can_pci_mmap_wc
#define arch_can_pci_mmap_wc() 0