spi: pxa2xx: Use inclusive language
Replace master/slave by host/peripheral language in the documentation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231208170436.3309648-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Andy Shevchenko
Mark Brown
parent
88a50c1663
commit
c3aeaf2f0e
|
|
@ -3,13 +3,13 @@ PXA2xx SPI on SSP driver HOWTO
|
|||
==============================
|
||||
|
||||
This a mini HOWTO on the pxa2xx_spi driver. The driver turns a PXA2xx
|
||||
synchronous serial port into an SPI master controller
|
||||
synchronous serial port into an SPI host controller
|
||||
(see Documentation/spi/spi-summary.rst). The driver has the following features
|
||||
|
||||
- Support for any PXA2xx and compatible SSP.
|
||||
- SSP PIO and SSP DMA data transfers.
|
||||
- External and Internal (SSPFRM) chip selects.
|
||||
- Per slave device (chip) configuration.
|
||||
- Per peripheral device (chip) configuration.
|
||||
- Full suspend, freeze, resume support.
|
||||
|
||||
The driver is built around a &struct spi_message FIFO serviced by kernel
|
||||
|
|
@ -17,10 +17,10 @@ thread. The kernel thread, spi_pump_messages(), drives message FIFO and
|
|||
is responsible for queuing SPI transactions and setting up and launching
|
||||
the DMA or interrupt driven transfers.
|
||||
|
||||
Declaring PXA2xx Master Controllers
|
||||
-----------------------------------
|
||||
Typically, for a legacy platform, an SPI master is defined in the
|
||||
arch/.../mach-*/board-*.c as a "platform device". The master configuration
|
||||
Declaring PXA2xx host controllers
|
||||
---------------------------------
|
||||
Typically, for a legacy platform, an SPI host controller is defined in the
|
||||
arch/.../mach-*/board-*.c as a "platform device". The host controller configuration
|
||||
is passed to the driver via a table found in include/linux/spi/pxa2xx_spi.h::
|
||||
|
||||
struct pxa2xx_spi_controller {
|
||||
|
|
@ -30,7 +30,7 @@ is passed to the driver via a table found in include/linux/spi/pxa2xx_spi.h::
|
|||
};
|
||||
|
||||
The "pxa2xx_spi_controller.num_chipselect" field is used to determine the number of
|
||||
slave device (chips) attached to this SPI master.
|
||||
peripheral devices (chips) attached to this SPI host controller.
|
||||
|
||||
The "pxa2xx_spi_controller.enable_dma" field informs the driver that SSP DMA should
|
||||
be used. This caused the driver to acquire two DMA channels: Rx channel and
|
||||
|
|
@ -40,8 +40,8 @@ See the "PXA2xx Developer Manual" section "DMA Controller".
|
|||
For the new platforms the description of the controller and peripheral devices
|
||||
comes from Device Tree or ACPI.
|
||||
|
||||
NSSP MASTER SAMPLE
|
||||
------------------
|
||||
NSSP HOST SAMPLE
|
||||
----------------
|
||||
Below is a sample configuration using the PXA255 NSSP for a legacy platform::
|
||||
|
||||
static struct resource pxa_spi_nssp_resources[] = {
|
||||
|
|
@ -57,7 +57,7 @@ Below is a sample configuration using the PXA255 NSSP for a legacy platform::
|
|||
},
|
||||
};
|
||||
|
||||
static struct pxa2xx_spi_controller pxa_nssp_master_info = {
|
||||
static struct pxa2xx_spi_controller pxa_nssp_controller_info = {
|
||||
.num_chipselect = 1, /* Matches the number of chips attached to NSSP */
|
||||
.enable_dma = 1, /* Enables NSSP DMA */
|
||||
};
|
||||
|
|
@ -68,7 +68,7 @@ Below is a sample configuration using the PXA255 NSSP for a legacy platform::
|
|||
.resource = pxa_spi_nssp_resources,
|
||||
.num_resources = ARRAY_SIZE(pxa_spi_nssp_resources),
|
||||
.dev = {
|
||||
.platform_data = &pxa_nssp_master_info, /* Passed to driver */
|
||||
.platform_data = &pxa_nssp_controller_info, /* Passed to driver */
|
||||
},
|
||||
};
|
||||
|
||||
|
|
@ -81,17 +81,17 @@ Below is a sample configuration using the PXA255 NSSP for a legacy platform::
|
|||
(void)platform_add_device(devices, ARRAY_SIZE(devices));
|
||||
}
|
||||
|
||||
Declaring Slave Devices
|
||||
-----------------------
|
||||
Typically, for a legacy platform, each SPI slave (chip) is defined in the
|
||||
Declaring peripheral devices
|
||||
----------------------------
|
||||
Typically, for a legacy platform, each SPI peripheral device (chip) is defined in the
|
||||
arch/.../mach-*/board-*.c using the "spi_board_info" structure found in
|
||||
"linux/spi/spi.h". See "Documentation/spi/spi-summary.rst" for additional
|
||||
information.
|
||||
|
||||
Each slave device attached to the PXA must provide slave specific configuration
|
||||
Each peripheral device (chip) attached to the PXA2xx must provide specific chip configuration
|
||||
information via the structure "pxa2xx_spi_chip" found in
|
||||
"include/linux/spi/pxa2xx_spi.h". The pxa2xx_spi master controller driver
|
||||
will uses the configuration whenever the driver communicates with the slave
|
||||
"include/linux/spi/pxa2xx_spi.h". The PXA2xx host controller driver will use
|
||||
the configuration whenever the driver communicates with the peripheral
|
||||
device. All fields are optional.
|
||||
|
||||
::
|
||||
|
|
@ -123,7 +123,7 @@ dma_burst_size == 0.
|
|||
The "pxa2xx_spi_chip.timeout" fields is used to efficiently handle
|
||||
trailing bytes in the SSP receiver FIFO. The correct value for this field is
|
||||
dependent on the SPI bus speed ("spi_board_info.max_speed_hz") and the specific
|
||||
slave device. Please note that the PXA2xx SSP 1 does not support trailing byte
|
||||
peripheral device. Please note that the PXA2xx SSP 1 does not support trailing byte
|
||||
timeouts and must busy-wait any trailing bytes.
|
||||
|
||||
NOTE: the SPI driver cannot control the chip select if SSPFRM is used, so the
|
||||
|
|
@ -132,8 +132,8 @@ asserted around the complete message. Use SSPFRM as a GPIO (through a descriptor
|
|||
to accommodate these chips.
|
||||
|
||||
|
||||
NSSP SLAVE SAMPLE
|
||||
-----------------
|
||||
NSSP PERIPHERAL SAMPLE
|
||||
----------------------
|
||||
For a legacy platform or in some other cases, the pxa2xx_spi_chip structure
|
||||
is passed to the pxa2xx_spi driver in the "spi_board_info.controller_data"
|
||||
field. Below is a sample configuration using the PXA255 NSSP.
|
||||
|
|
@ -161,16 +161,16 @@ field. Below is a sample configuration using the PXA255 NSSP.
|
|||
.bus_num = 2, /* Framework bus number */
|
||||
.chip_select = 0, /* Framework chip select */
|
||||
.platform_data = NULL; /* No spi_driver specific config */
|
||||
.controller_data = &cs8415a_chip_info, /* Master chip config */
|
||||
.irq = STREETRACER_APCI_IRQ, /* Slave device interrupt */
|
||||
.controller_data = &cs8415a_chip_info, /* Host controller config */
|
||||
.irq = STREETRACER_APCI_IRQ, /* Peripheral device interrupt */
|
||||
},
|
||||
{
|
||||
.modalias = "cs8405a", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 3686400, /* Run SSP as fast a possible */
|
||||
.bus_num = 2, /* Framework bus number */
|
||||
.chip_select = 1, /* Framework chip select */
|
||||
.controller_data = &cs8405a_chip_info, /* Master chip config */
|
||||
.irq = STREETRACER_APCI_IRQ, /* Slave device interrupt */
|
||||
.controller_data = &cs8405a_chip_info, /* Host controller config */
|
||||
.irq = STREETRACER_APCI_IRQ, /* Peripheral device interrupt */
|
||||
},
|
||||
};
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue